Structural Evolution of α-Fe2O3(0001) Surfaces Under Reduction Conditions Monitored by Infrared Spectroscopy

Radiation-induced lattice relaxation in [Formula: see text]-Fe[Formula: see text]O[Formula: see text] nanorods

We report radiation-induced lattice relaxation of the [Formula: see text]-Fe[Formula: see text]O[Formula: see text] and its associated alteration of particle morphology. The [Formula: see text]-Fe[Formula: see text]O[Formula: see text] was grown in solution by microwave hydrothermal synthesis technique in which more than half of the synthesized material was nanorods with axis along the (001) direction. Five sets of the synthesized [Formula: see text]-Fe[Formula: see text]O[Formula: see text] samples were irradiated using gamma-ray from [Formula: see text]Co cell with doses of 600 kGy, 700 kGy, 800 kGy, 900 kGy, and 1 MGy. The investigation of the pristine and gamma-irradiated samples was carried out using X-ray powder diffraction, transmission electron microscope, and electron paramagnetic resonance methods. Results showed that continuous alternation of radiation-induced lattice compression and expansion causes lattice relaxation. The morphology of the [Formula: see text]-Fe[Formula: see text]O[Formula: see text] nanorods was found to change with absorbed dose into buckyball-shaped particles in response to the alternation of the compression and expansion strain. The EPR results showed a correlation between distortion in the [Formula: see text]-[Formula: see text] octahedron structure and the relaxation of the lattice. The synthesis, growth, and relaxation are discussed in detail.

The Relationship between the Structural Characteristics of α-Fe2O3 Catalysts and Their Lattice Oxygen Reactivity Regarding Hydrogen

In this paper, the relationship between the structural features of hematite samples calcined in the interval of 800-1100 °C and their reactivity regarding hydrogen studied in the temperature-programmed reaction (TPR-H₂) was studied. The oxygen reactivity of the samples decreases with the increasing calcination temperature. The study of calcined hematite samples used X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), and Raman spectroscopy, and their textural characteristics were studied also. According to XRD results, hematite samples calcined in the temperature range under study are monophase, represented by the α-Fe₂O₃ phase, in which crystal density increases with increasing calcination temperature. The Raman spectroscopy results also register only the α-Fe₂O₃ phase; the samples consist of large, well-crystallized particles with smaller particles on their surface, having a significantly lower degree of crystallinity, and their proportion decreases with increasing calcination temperature. XPS results show the α-Fe₂O₃ surface enriched with Fe²⁺ ions, whose proportion increases with increasing calcination temperature, which leads to an increase in the lattice oxygen binding energy and a decrease in the α-Fe₂O₃ reactivity regarding hydrogen.

Improvement of magnetite adsorption performance for Pb (II) by introducing defects

Surface defect engineering is an efficient strategy to enhance the adsorption properties of materials. After calcination in argon, the adsorption capacity of natural magnetite to Pb (II) is significantly improved. The Rietveld refinement, Mössbauer spectrum, and XPS were used to prove the existence of oxygen and cation vacancies in the crystal structure of magnetite after calcination, and it is found that the vacancy content is linearly related to the adsorption amount of Pb (II). This indicates that the increase in the adsorption performance of magnetite after calcination is determined by the vacancy. The adsorption capacity increases from 8 to 26 mg/g when the calcination temperature reaches 700°C. The equilibrium adsorption process of Pb (II) on magnetite can be well fitted to the Langmuir model, and the kinetic adsorption followed a pseudo-second-order mechanism. The improvement of the adsorption performance of magnetite is mainly due to the change in its structure, which depends on the oxidation degree and surface effect of magnetite in the calcination process. This work also provides a theoretical basis for the broad application of magnetite as environmental material.

Triple crosslinking conductive hydrogels with digitally printable and outstanding mechanical stability for high-resolution conformable bioelectronics

Soft, conductive, and stretchable hydrogels offer a broad variety of applications, including skin-interfacing electrodes, biomonitoring patches, and electrostimulation. Despite rapid developments over the last decades, a combination of good electrical and mechanical properties, low-cost fabrication, and biocompatibility is yet to be demonstrated. Also, the current methods for deposition and patterning of these hydrogels are manual, and there is a need toward autonomous and digital fabrication techniques. In this work, we demonstrate a novel Gallium (Ga) embedded sodium-alginate-polyacrylamide-LAPONITE® (Ga-SA-PAAM-La) hydrogel, that is ultra-stretchable (Maximum strain tolerance of∼985%), tough (toughness ∼30 kJ m^-3), bio-adhesive (adhesion energy ∼216 J m^-2), conductive, and digitally printable. Ga nanoparticles are used as radical initiators. By adjusting the sonication parameters, we control the solution viscosity and curing time, thus allowing us to prepare pre-polymers with the desired properties for casting, or digital printing. These hydrogels benefit from a triple-network structure due to the role of Ga droplets as crosslinkers besides BIS (N,N'-methylene-bis-acrylamide) and LAPONITE®, thus resulting in tough composite hydrogels. The inclusion of LAPONITE® into the hydrogel network improved its electrical conductivity, adhesion, digital printability, and its mechanical properties, (>6× compared to the same hydrogel without LAPONITE®). As electrodes in the electrocardiogram, the signal-to-noise ratio was surprisingly higher than the medical-grade Ag/AgCl electrodes, which are applied for monitoring muscles, heart, respiration, and body joint angle through EMG, ECG, and bioimpedance measurements. The results obtained prove that such digitally printed conductive and tough hydrogels can be used as potential electrodes and sensors in practical applications in the next generation of printed wearable computing devices.

Effect of Concrete Composition on the Thermodynamic Binding of Dopamine: A DFT Study

Concrete has long been a standard in construction projects. However, increasing the binding of cement paste to the concrete aggregate (a collection of geological materials containing, e.g., gravel, sand, etc.) remains an open area of research, as this is a common failure point in concrete-based infrastructure. One solution is the application of an adhesive into the mix that not only is capable of binding under aqueous conditions but can aid in the binding of the aggregate to the cement paste. Bioinspired catecholic-type molecules have been shown to be an ultrastrong adhesive, even under wet conditions, and would, in principle, be an ideal candidate to use. In this study, we examine how dopamine (a molecule with a catechol functionality) binds to various oxides found in concrete mixtures. We find that dopamine binds preferentially to alkaline earth oxides; thus, for concrete mixtures rich in these minerals dopamine would be an ideal candidate for improved adhesion.

Development of Mg-doped hematite (α-Fe2O3)-based hydroelectric cell to generate green electricity

The fabricated Mg-doped ‘α-Fe2O3’-based HEC generates a short circuit current of ∼40 mA and power output of 36 mW. This is a promising device for producing green energy, and opens new avenues for alternative sources of green energy.

Hematite facet-mediated microbial dissimilatory iron reduction and production of reactive oxygen species during aerobic oxidation

Microbial dissimilatory iron reduction and aerobic oxidation affect the biogeochemical cycles of many elements. Although the processes have been widely studied, the underlying mechanisms, and especially how the surface structures of iron oxides affect these redox processes, are poorly understood. Therefore, {001} facet-dominated hematite nanoplates (HNP) and {100} facet-dominated hematite nanorods (HNR) were used to explore the effects of surface structure on the microbial dissimilatory iron reduction and aerobic oxidation processes. During the reduction stage, the production of total Fe(II) normalized by specific surface area (SSA) was higher for HNP than HNR due to steric effects and the ligand-bound conformation of the connection between iron on different exposed facets and electron donors from microorganisms. However, during the aerobic oxidation stage, both the SSA- and Fe(II)-normalized reactive oxygen species (ROS), including hydrogen peroxide (H₂O₂) and hydroxyl radical (•OH), were higher for HNR than HNP. Theoretical calculation results showed that the {100} facets exhibited a lower activation energy barrier for oxygen reduction reaction than {001} facets, supporting the experimental observation that {100} facet-dominated HNR had a higher ROS production efficiency than {001} facet-dominated HNP. These results indicated that surface characteristics not only mediated the microbial reduction of Fe(III) but also affected the aerobic oxidation of microbially reduced Fe(II). Accessibility of electron donors to surface iron atom determined the reduction of Fe(III), and activation energy barrier for oxygen reduction by surface Fe(II) dominated the ROS production during the redox processes. This study advances our understanding of the mechanisms through which ROS are produced by iron (oxyhydr)oxides during microbial dissimilatory iron reduction and aerobic oxidation processes.

Magnetic and Conductive Liquid Metal Gels

Liquid metals are fast becoming a new class of universal and frictionless additives for the development of multifunctional soft and flexible materials. Herein, nanodroplets of eutectic gallium-indium alloy, which is liquid at room temperature, were used as a platform for the formulation of electrically conductive and magnetically responsive gels with the incorporation of Fe₃O₄ nanoparticles. The nanoadditives were prepared in situ within a water-based solution of polyvinyl alcohol. A borax cross-linking reaction was then performed to yield multifunctional flexible and self-healing gels. The physicochemical properties and changes in the nanoadditives at each step of the gel preparation method were characterized. Oxidation and complexation reactions between the liquid metal and iron oxide nanoadditives were observed. A mixture of nanosized functional magnetic Fe₃O₄/Fe₂O₃ and In-Fe oxide complexes was found to enable the magnetic susceptibility of the gels. The mechanical and self-healing properties of the gels were assessed, and finally, this flexible and multifunctional material was used as an electronic switch via remote magnetic actuation. The developed conductive and magnetic gels demonstrate great potential for the design of soft electronic systems.

Vibrational properties of CO2 adsorbed on the Fe3O4 (111) surface: Insights gained from DFT

By virtue of density functional theory calculations, this work discusses several carbonate, carboxylate, and bicarbonate species on two thermodynamically relevant metal terminations of the (111) surface of magnetite, Fe₃O₄. We present adsorption energies and vibrational wavenumbers and conclude in assigning the observed infrared reflection-absorption spectroscopy bands. CO₂ prefers to adsorb molecularly on the Fe_tet1 terminated Fe₃O₄(111) surface, a finding consistent with observation. Calculations compared with the experiment lead to interpreting results in favor of the Fe_tet1 (single metal) terminated Fe₃O₄(111) surface as the regular surface termination. Formation of carbonate and bicarbonate requires metal impurities on that surface. Such impurities exist, for instance, on the Fe_oct2 (double metal) termination, which can thus be used as a model for "metal-rich terminations" of more complex surfaces.

Elucidating Surface Structure with Action Spectroscopy

Surface Action Spectroscopy, a vibrational spectroscopy method developed in recent years at the Fritz Haber Institute is employed for structure determination of clean and H₂O-dosed (111) magnetite surfaces. Surface structural information is revealed by using the microscopic surface vibrations as a fingerprint of the surface structure. Such vibrations involve just the topmost atomic layers, and therefore the structural information is truly surface related. Our results strongly support the view that regular Fe₃O₄(111)/Pt(111) is terminated by the so-called Fe_tet1 termination, that the biphase termination of Fe₃O₄(111)/Pt(111) consists of FeO and Fe₃O₄(111) terminated areas, and we show that the method can differentiate between different water structures in H₂O-derived adsorbate layers on Fe₃O₄(111)/Pt(111). With this, we conclude that the method is a capable new member in the set of techniques providing crucial information to elucidate surface structures. The method does not rely on translational symmetry and can therefore also be applied to systems which are not well ordered. Even an application to rough surfaces is possible.

Dual Lewis site creation for activation of methanol on Fe3O4(111) thin films

Despite a wide application in heterogeneous catalysis, the surface termination of Fe₃O₄(111) remains controversial. Herein, a surface with both Lewis acid and base sites is created through formation of an Fe₃O₄(111) film on α-Fe₂O₃(0001). The dual functionality is generated from a locally nonuniform surface layer of O adatoms and Fe_tet1 sites. This reactive layer is reproducibly formed even in oxygen-free environments because of the high mobility of ions in the underlying α-Fe₂O₃(0001). The atomic structure of the Fe₃O₄(111) surface was identified by scanning tunneling microscopy (STM) and density functional theory (DFT) using the registry of the overlayers with the surface and the distinct electronic structure of oxygen adatom (O_ad) and uncovered lattice Fe_tet1. The surface is dominated by the interface of O_ad and Fe_tet1, a Lewis acid–base pair, which favors methanol dissociation at room temperature to form methoxy. Methoxy is further oxidized to yield formaldehyde at 700 K in temperature programmed reaction spectra, corresponding to an approximate activation barrier of 179 kJ mol⁻¹. The surface termination of Fe₃O₄(111) is fully recovered by rapid heating to 720 K in vacuum, demonstrating the high mobility of ions in this material. The work establishes a clear fundamental understanding of a unique magnetite surface and provides insights into the origin of selective oxidation of alcohols on magnetite-terminated catalysts.

Adjacent oxygen adatoms and lattice iron atoms on magnetite surfaces serve as dual Lewis sites that oxidize methanol to formaldehyde.