Modern Chemical Routes for the Controlled Synthesis of Anisotropic Bimetallic Nanostructures and Their Application in Catalysis

Ag-Mediated Growth of Au/Ag-Cu Ternary Heterostructures for Selective Electrochemical CO2 Reduction

Copper (Cu)-based nanocatalysts play crucial roles in the electrochemical CO2 reduction reaction (ECO2RR) for sustainable energy resources. Particularly, Cu-based nanostructures incorporating Au and Ag are promising, offering enhanced activity, selectivity, and stability. However, precise control over the structure and composition of heterostructures remains challenging, hindering the development of highly efficient catalysts. Herein, we present a silver (Ag) transition-layer-mediated approach to synthesize ternary heterostructures with two specific morphologies, namely, Au/Ag-Cu-side and Au/Ag-Cu-tip, which exhibit different Ag-Cu interface epitaxial patterns. The two heterostructures achieve high C2 product selectivity in ECO2RR. Especially, the Au/Ag-Cu-side structure achieves 50.3% C2 selectivity with 35.5% ethanol, while the tip structure shows higher ethylene selectivity. Our study reveals the impact of the Ag layer in directing deposition sites on heterostructure growth and further facilitating the design of multicomponent Cu-based catalysts with enhanced structural integrity and ECO2RR performance.

Synergistic antibacterial mechanism of silver-copper bimetallic nanoparticles

The excessive use of antibiotics in clinical settings has resulted in the rapid expansion, evolution, and development of bacterial and microorganism resistance. It causes a significant challenge to the medical community. Therefore, it is important to develop new antibacterial materials that could replace traditional antibiotics. With the advancements in nanotechnology, it has become evident that metallic and metal oxide nanoparticles (MeO NPs) exhibit stronger antibacterial properties than their bulk and micron-sized counterparts. The antibacterial properties of silver nanoparticles (Ag NPs) and copper nanoparticles (Cu NPs) have been extensively studied, including the release of metal ions, oxidative stress responses, damages to cell integrity, and immunostimulatory effects. However, it is crucial to consider the potential cytotoxicity and genotoxicity of Ag NPs and Cu NPs. Numerous experimental studies have demonstrated that bimetallic nanoparticles (BNPs) composed of Ag NPs and Cu NPs exhibit strong antibacterial effects while maintaining low cytotoxicity. Bimetallic nanoparticles offer an effective means to mitigate the genotoxicity associated with individual nanoparticles while considerably enhancing their antibacterial efficacy. In this paper, we presented on various synthesis methods for Ag-Cu NPs, emphasizing their synergistic effects, processes of reactive oxygen species (ROS) generation, photocatalytic properties, antibacterial mechanisms, and the factors influencing their performance. These materials have the potential to enhance efficacy, reduce toxicity, and find broader applications in combating antibiotic resistance while promoting public health.

A review of physical, chemical and biological synthesis methods of bimetallic nanoparticles and applications in sensing, water treatment, biomedicine, catalysis and hydrogen storage

This article provides an in-depth analysis of various fabrication methods of bimetallic nanoparticles (BNP), including chemical, biological, and physical techniques. The review explores BNP's diverse uses, from well-known applications such as sensing water treatment and biomedical uses to less-studied areas like breath sensing for diabetes monitoring and hydrogen storage. It cites results from over 1000 researchers worldwide and >300 peer-reviewed articles. Additionally, the article discusses current trends, actionable recommendations, and the importance of synthetic analysis for industry players looking to optimize manufacturing techniques for specific applications. The article also evaluates the pros and cons of various fabrication methods, highlighting the potential of plant extract synthesis for mass production of capped BNPs. However, it warns that this method may not be suitable for certain applications requiring ligand-free surfaces. In contrast, physical methods like laser ablation offer better control and reactivity, especially for applications where ligand-free surfaces are critical. The report underscores the environmental benefits of plant extract synthesis compared to chemical methods that use hazardous chemicals and pose risks to extraction, production, and disposal. The article emphasizes the need for life cycle assessment (LCA) articles in the literature, given the growing volume of research on nanotechnology materials. This article caters to researchers at all stages and applies to various fields applying nanomaterials.

Plasmon-Determined Selectivity in Photocatalytic Transformations on Gold and Gold-Palladium Nanostructures

Noble metal nanostructures absorb light producing coherent oscillations of the metal's electrons, so-called localized surface plasmon resonances (LSPRs). LSPRs can decay generating hot carriers, highly energetic species that trigger chemical transformations in the molecules located on the metal surfaces. The number of chemical reactions can be expanded by coupling noble and catalytically active metals. However, it remains unclear whether such mono- and bimetallic nanostructures possess any sensitivity toward one or another chemical reaction if both of them can take place in one molecular analyte. In this study, we utilize tip-enhanced Raman spectroscopy (TERS), an emerging analytical technique that has single-molecule sensitivity and sub-nanometer spatial resolution, to investigate plasmon-driven reactivity of 2-nitro-5-thiolobenzoic acid (2-N-5TBA) on gold and gold@palladium nanoplates (AuNPs and Au@PdNPs). This molecular analyte possesses both nitro and carboxyl groups, which can be reduced or removed by hot carriers. We found that on AuNPs, 2-N-5TBA dimerized forming 4,4'-dimethylazobenzene (DMAB), the bicarbonyl derivative of DMAB, as well as 4-nitrobenzenethiol (4-NBT). Our accompanying theoretical investigation based on density functional theory (DFT) and time-dependent density functional theory (TDDFT) confirmed these findings. The theoretical analysis shows that 2-N-5TBA first dimerized forming the bicarbonyl derivative of DMAB, which then decarboxylated forming DMAB. Finally, DMAB can be further reduced leading to 4-NBT. This reaction mechanism is supported by TERS-determined yields on these three molecules on AuNPs. We also found that on Au@PdNPs, 2-N-5TBA first formed the bicarbonyl derivative of DMAB, which is then reduced to both bihydroxyl-DMAB and 4-amino-3-mercaptobenzoic acid. The yield of these reaction products on Au@PdNPs strictly follows the free-energy potential of these molecules on the metallic surfaces.

Copper(i) as a reducing agent for the synthesis of bimetallic PtCu catalytic nanoparticles

This work investigates the potential utilization of Cu(i) as a reducing agent for the transformation of the platinum salt K2PtCl4, resulting in the production of stable nanoparticles. The synthesized nanoparticles exhibit a bimetallic composition, incorporating copper within their final structure. This approach offers a convenient and accessible methodology for the production of bimetallic nanostructures. The catalytic properties of these novel nanomaterials have been explored in various applications, including their use as artificial metalloenzymes and in the degradation of dyes. The findings underscore the significant potential of Cu(i)-mediated reduction in the development of functional nanomaterials with diverse catalytic applications.

Advances in CO2 utilization employing anisotropic nanomaterials as catalysts: a review

Anisotropic nanomaterials are materials with structures and properties that vary depending on the direction in which they are measured. Unlike isotropic materials, which exhibit uniform physical properties in all directions, anisotropic materials have different mechanical, electrical, thermal, and optical properties in different directions. Examples of anisotropic nanomaterials include nanocubes, nanowires, nanorods, nanoprisms, nanostars, and so on. These materials have unique properties that make them useful in a variety of applications, such as electronics, energy storage, catalysis, and biomedical engineering. One of the key advantages of anisotropic nanomaterials is their high aspect ratio, which refers to the ratio of their length to their width, which can enhance their mechanical and electrical properties, making them suitable for use in nanocomposites and other nanoscale applications. However, the anisotropic nature of these materials also presents challenges in their synthesis and processing. For example, it can be difficult to align the nanostructures in a specific direction to impart modulation of a specific property. Despite these challenges, research into anisotropic nanomaterials continues to grow, and scientists are working to develop new synthesis methods and processing techniques to unlock their full potential. Utilization of carbon dioxide (CO₂) as a renewable and sustainable source of carbon has been a topic of increasing interest due to its impact on reducing the level of greenhouse gas emissions. Anisotropic nanomaterials have been used to improve the efficiency of CO₂ conversion into useful chemicals and fuels using a variety of processes such as photocatalysis, electrocatalysis, and thermocatalysis. More study is required to improve the usage of anisotropic nanomaterials for CO₂ consumption and to scale up these technologies for industrial use. The unique properties of anisotropic nanomaterials, such as their high surface area, tunable morphology, and high activity, make them promising catalysts for CO₂ utilization. This review article discusses briefly about various approaches towards the synthesis of anisotropic nanomaterials and their applications in CO₂ utilization. The article also highlights the challenges and opportunities in this field and the future direction of research.

Non-Noble-Metal Mono and Bimetallic Composites for Efficient Electrocatalysis of Phosphine Oxide and Acetylene C-H/P-H Coupling under Mild Conditions

The present work describes an efficient reaction of electrochemical phosphorylation of phenylacetylene controlled by the composition of catalytic nanoparticles based on non-noble-metals. The sought-after products are produced via the simple synthetic protocol based on room temperature, atom-economical reactions, and silica nanoparticles (SNs) loaded by one or two d-metal ions as nanocatalysts. The redox and catalytic properties of SNs can be tuned with a range of parameters, such as compositions of the bimetallic systems, their preparation method, and morphology. Monometallic SNs give phosphorylated acetylene with retention of the triple bond, and bimetallic SNs give a bis-phosphorylation product. This is the first example of acetylene and phosphine oxide C-H/P-H coupling with a regenerable and recyclable catalyst.

Nano-Engineered Surface Comprising Metallic Dendrites for Biomolecular Analysis in Clinical Perspective

Metallic dendrites, a class of three-dimensional nanostructured materials, have drawn a lot of interests in the recent years because of their interesting hierarchical structures and distinctive features. They are a hierarchical self-assembled array of primary, secondary, and terminal branches with a plethora of pointed ends, ridges, and edges. These features provide them with larger active surface areas. Due to their enormous active areas, the catalytic activity and conductivity of these nanostructures are higher as compared to other nanomaterials; therefore, they are increasingly used in the fabrication of sensors. This review begins with the properties and various synthetic approaches of nanodendrites. The primary goal of this review is to summarize various nanodendrites-engineered biosensors for monitoring of small molecules, macromolecules, metal ions, and cells in a wide variety of real matrices. Finally, to enlighten future research, the limitations and future potential of these newly discovered materials are discussed.

Near infrared optically responsive Ag-Cu bimetallic 2D nanocrystals with controllable spatial structures

The optical properties of cost-effective Ag-Cu bimetallic nanocrystals, with synergistically enhanced catalytic and biological activities, are limited within ultraviolet-visible region due to lack of morphology control. In order to overcome this constraint, two-dimensional (2D) Ag-Cu bimetallic heterostructures were designed and synthesized by a seed-mediated colloidal growth method. The conformal Cu domain was epitaxially deposited on Ag nanoplates with different spatial configuration under retention of their 2D shape. Both of the 2D Ag-Cu core@shell and Janus structures display tunable localized surface plasmon resonance from visible to near infrared regions. The results of catalytic reduction of 4-nitrophenol show that the 2D Ag-Cu core@shell structure has better synergistic catalytic performance than Janus structure and Ag plates. In addition to surface-related synergistically enhanced bactericidal performance, their antibacterial effect can also be significantly enhanced by near infrared light irradiation. These results indicate that 2D Ag-Cu heterostructures can benefit from both synergistically improved surface activity and great optical responsive characteristics.

Shedding Light on Luminescent Janus Nanoparticles: From Synthesis to Photoluminescence and Applications

Luminescent Janus nanoparticles refer to a special category of Janus-based nanomaterials that not only exhibit dual-asymmetric surface nature but also attractive optical properties. The introduction of luminescence has endowed conventional Janus nanoparticles with many alluring light-responsive functionalities and broadens their applications in imaging, sensing, nanomotors, photo-based therapy, etc. The past few decades have witnessed significant achievements in this field. This review first summarizes well-established strategies to design and prepare luminescent Janus nanoparticles and then discusses optical properties of luminescent Janus nanoparticles based on downconversion and upconversion photoluminescence mechanisms. Various emerging applications of luminescent Janus nanoparticles are also introduced. Finally, opportunities and future challenges are highlighted with respect to the development of next-generation luminescent Janus nanoparticles with diverse applications.

Green synthesis and characterization of gold-based anisotropic nanostructures using bimetallic nanoparticles as seeds

Nanostructured noble metals are of great interest because of their tunable optical and electronic properties. However, the green synthesis of anisotropic nanostructures with a defined geometry by the systematic nanoassembly of particles into specific shape, size, and crystallographic facets still faces major challenges. The present work aimed to establish an environmentally friendly methodology for synthesizing gold-based anisotropic nanostructures using starch-capped bimetallic silver/gold nanoparticles as seeds and hydrogen peroxide as a reducing agent.

Anisotropic Silver Nanoparticles Gel Exhibits Antibacterial Action and Reduced Scar Formation on Wounds Contaminated with Methicillin-Resistant Staphylococcus pseudintermedius (MRSP) in a Mice Model

Simple Summary

Wound infection in animals with antimicrobial resistant bacteria, especially Staphylococcus pseudintermedius, plays an important role in the delay of wound healing. In this work, the antimicrobial and wound healing activities of gels containing anisotropic AgNPs were evaluated on wounds contaminated with Methicillin-resistant Staphylococcus pseudintermedius in a mice model. The results show that anisotropic AgNPs gel is effective in eliminating bacteria and preventing pus formation. Furthermore, anisotropic AgNPs gel exhibits improved collagen alignment that supports scar disappearance.

Abstract

Staphylococcus pseudintermedius (S. pseudintermedius) infected wounds can cause seriously delayed wound healing processes in animals. Antimicrobial agents that have antimicrobial and wound healing efficacy have become an essential tool for overcoming this problem. In our previous study, anisotropic AgNPs have been reported to have antimicrobial efficiency against animal and human pathogens, and could be suitable as antimicrobial agents for infected wounds. Here, antimicrobial and wound healing activities of anisotropic AgNPs gels were assessed in vivo. BALB/cAJcl mice wounds were infected by Methicillin-resistant Staphylococcus pseudintermedius (MRSP). Then, antibacterial and wound healing activities were evaluated by bacterial cell count, wound contraction, digital capture, and histology. The results show that anisotropic AgNPs gels could eliminate all bacterial cell infected wounds within 7 days, the same as povidone iodine. Wound healing activity was evaluated by wound contraction (%). The results showed 100% wound contraction in groups treated with anisotropic AgNPs gels within 14 days that was not significantly different from povidone iodine and control gel without AgNPs. However, the digital capture of wounds on day 4 showed that anisotropic AgNPs gel prevented pus formation and reduced scar appearance within 21 days. The histology results exhibit improved collagen fiber alignment that supports scar disappearance. In conclusion, these results indicate that anisotropic AgNPs gels are suitable for treating infected wounds. The gel is effective in eliminating bacteria that supports the natural process of wound repair and also causes reduced scar formation.

Strategy to Design-Synthesize Bimetallic Nanostructures Using the Alcohol Reduction Method

Bimetallic nanomaterials have attracted much attention from various fields such as catalysis, optics, magnetism, and so forth. The functionality of such particles is influenced very much by the intermetallic interactions than their individual contribution. However, compared with the synthesis of monometallic nanoparticles, the reaction parameters that need to be controlled for tuning the size, shape, composition, and crystal structure of bimetallic nanoparticles becomes challenging. This study focuses on synthesizing of bimetallic nanostructures using the alcohol reduction method, where the control over the reducing power is conceivable by varying the combination of the alcohol type, complexing agent, and metal salts. Consequently, various Cu-Co nanostructures such as Cu-Co core-shell (size ranged between 40 and 15 nm) and hollow alloy nanoparticles and nanotubes were successfully synthesized by incorporating diffusion and etching phenomena during the reduction reaction. Moreover, time-resolved sampling revealed that the formation of a Cu-Co alloy hollow nanostructure has been realized by the diffusion of the Cu core into the Co shell by controlling the reduction time gap between Cu and Co and the crystal structure besides the reduction sequences. It should be noted that the synthesis of a high-temperature (∼1300 °C) Cu-Co alloy phase was carried out at 170 °C. Among the Cu-Co alloy nanostructures, Cu-Co hollow alloy nanoparticles exhibited enhanced catalytic activity compared to metallic Cu and other Cu-Co nanostructures from the degradation reaction of methylene blue. The enhanced catalytic performance was considered to be mainly due to the alloy structure.

Controllable Synthesis of Bimetallic Nanostructures Using Biogenic Reagents: A Green Perspective

Bimetallic nanostructures are emerging as a significant class of metal nanomaterials due to their exceptional properties that are useful in various areas of science and technology. When used for catalysis and sensing applications, bimetallic nanostructures have been noted to exhibit better performance relative to their monometallic counterparts owing to synergistic effects. Furthermore, their dual metal composition and configuration can be modulated to achieve optimal activity for the desired functions. However, as with other nanostructured metals, bimetallic nanostructures are usually prepared through wet chemical routes that involve the use of harsh reducing agents and hazardous stabilizing agents. In response to intensifying concerns over the toxicity of chemicals used in nanomaterial synthesis, the scientific community has increasingly turned its attention toward environmentally and biologically compatible reagents that can enable green and sustainable nanofabrication processes. This article aims to provide an evaluation of the green synthetic methods of constructing bimetallic nanostructures, with emphasis on the use of biogenic resources (e.g., plant extracts, DNA, proteins) as safe and practical reagents. Special attention is devoted to biogenic synthetic protocols that demonstrate controllable nanoscale features, such as size, composition, morphology, and configuration. The potential use of these biogenically prepared bimetallic nanostructures as catalysts and sensors is also discussed. It is hoped that this article will serve as a valuable reference on bimetallic nanostructures and will help fuel new ideas for the development of more eco-friendly strategies for the controllable synthesis of various types of nanostructured bimetallic systems.

M. M. de Almeida J, Pastoriza-Santos I, C. C. Coelho L. Advances in Plasmonic Sensing at the NIR-A Review

Surface plasmon resonance (SPR) and localized surface plasmon resonance (LSPR) are among the most common and powerful label-free refractive index-based biosensing techniques available nowadays. Focusing on LSPR sensors, their performance is highly dependent on the size, shape, and nature of the nanomaterial employed. Indeed, the tailoring of those parameters allows the development of LSPR sensors with a tunable wavelength range between the ultra-violet (UV) and near infra-red (NIR). Furthermore, dealing with LSPR along optical fiber technology, with their low attenuation coefficients at NIR, allow for the possibility to create ultra-sensitive and long-range sensing networks to be deployed in a variety of both biological and chemical sensors. This work provides a detailed review of the key science underpinning such systems as well as recent progress in the development of several LSPR-based biosensors in the NIR wavelengths, including an overview of the LSPR phenomena along recent developments in the field of nanomaterials and nanostructure development towards NIR sensing. The review ends with a consideration of key advances in terms of nanostructure characteristics for LSPR sensing and prospects for future research and advances in this field.

Mechanistic Investigations of Growth of Anisotropic Nanostructures in Reverse Micelles

Tailoring the characteristics of anisotropic nanostructures like size, morphology, aspect ratio, and size dispersity is of extreme importance due to the unique and tunable properties including catalytic, optical, photocatalytic, magnetic, photochemical, electrochemical, photoelectrochemical, and several other physical properties. The reverse microemulsion (RM) method offers a useful soft-template and low-temperature procedure that, by variation of experimental conditions and nature of reagents, has proved to be extremely versatile in synthesis of nanostructures with tailored properties. Although many reports of synthesis of nanostructures by the RM method exist in the literature, most of the research studies carried out still follow the "hit and trial" method where the synthesis conditions, reagents, and other factors are varied and the resulting characteristics of the obtained nanostructures are justified on the basis of existing physical chemistry principles. Mechanistic investigations are scarce to generate a set of empirical rules that would aid in preplanning the RM-based synthesis of nanostructures with desired characteristics as well as make the process viable on an industrial scale. A consolidation of such research data available in the literature is essential for providing future directions in the field. In this perspective, we analyze the literature reports that have investigated the mechanistic aspects of growth of anisotropic nanostructures using the RM method and distil the essence of the present understanding at the nanoscale timescale using techniques like FCS and ultrafast spectroscopy in addition to routine techniques like DLS, fluorescence, TEM, etc.

Reversing the Thermodynamics of Galvanic Replacement Reactions by Decreasing the Size of Gold Nanoparticles

Here, we describe the surprising reactivity between surface-attached (a) 0.9, 1.6, and 4.1 nm diameter weakly stabilized Au nanoparticles (NPs) and aqueous 1.0 × 10^-4 M Ag⁺ solution, and (b) 1.6 and 4.1 nm diameter weakly stabilized Au NPs and aqueous 1.0 × 10^-5 M PtCl₄^2-, which are considered to be antigalvanic replacement (AGR) reactions because they are not thermodynamically favorable for bulk-sized Au under these conditions. Anodic Stripping Voltammetry (ASV) and Scanning Transmission Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (STEM-EDS) mapping provide quantitation of the extent of Ag and Pt replacement as a function of Au NP diameter. The extent of the reaction increases as the Au NP size decreases. The percentage of Ag in the AuAg alloy following AGR based on ASV is 17.8 ± 0.6% for 4.1 nm diameter Au NPs, 87.2 ± 2.9% for 1.6 nm Au NPs, and an unprecedented full 100% Ag for 0.9 nm diameter Au NPs. STEM-EDS mapping shows very close agreement with the ASV-determined compositions. In the case of PtCl₄^2-, STEM-EDS mapping shows AuPt alloy NPs with 3.9 ± 1.3% and 41.1 ± 8.7% Pt following replacement with 4.1 and 1.6 nm diameter Au NPs, respectively, consistent with qualitative changes to the ASV. The size-dependent AGR correlates well with the negative shift in the standard potential (E⁰) for Au oxidation with decreasing NP size.