Combination of Microfluidic Loop-Mediated Isothermal Amplification with Gold Nanoparticles for Rapid Detection of Salmonella spp. in Food Samples

Research progress of loop-mediated isothermal amplification in the detection of Salmonella for food safety applications

Salmonella, the prevailing zoonotic pathogen within the Enterobacteriaceae family, holds the foremost position in global bacterial poisoning incidents, thereby signifying its paramount importance in public health. Consequently, the imperative for expeditious and uncomplicated detection techniques for Salmonella in food is underscored. After more than two decades of development, loop-mediated isothermal amplification (LAMP) has emerged as a potent adjunct to the polymerase chain reaction, demonstrating significant advantages in the realm of isothermal amplification. Its growing prominence is evident in the increasing number of reports on its application in the rapid detection of Salmonella. This paper provides a systematic exposition of the technical principles and characteristics of LAMP, along with an overview of the research progress made in the rapid detection of Salmonella using LAMP and its derivatives. Additionally, the target genes reported in various levels, including Salmonella genus, species, serogroup, and serotype, are summarized, aiming to offer a valuable reference for the advancement of LAMP application in Salmonella detection. Finally, we look forward to the development direction of LAMP and expect more competitive methods to provide strong support for food safety applications.

A molecular beacon design for a colorimetric loop-mediated isothermal amplification assay

In this study, a molecular beacon (MB) was designed for colorimetric loop-mediated isothermal amplification (cLAMP). The length of complementary bases on the MB, guanine and cytosine content (GC content), and hybridization sites of complementary bases were investigated as key factors affecting the design of the MB. We designed MBs consisting of 10, 15, and 20 complementary bases located at both ends of the HRPzyme. In the case of the long dumbbell DNA structure amplified from the hlyA gene of Listeria monocytogenes, possessing a flat region (F1c-B1) of 61 base pairs (bp), an MB was designed to intercalate into the flat region between the F1c and B1 regions of the LAMP amplicons. In the case of the short dumbbell DNA structure amplified from the bcfD gene of Salmonella species possessing a flat region (F1c-B1) length of 6 bp, another MB was designed to intercalate into the LoopF or LoopB regions of the LAMP amplicons. The results revealed that the hybridization site of the MB on the LAMP amplicons was not crucial in designing the MB, but the GC content was an important factor. The highest hybridization efficiencies for LAMP amplicons were obtained from hlyA gene-specific and bcfD gene-specific MBs containing 20- and 15-base complementary sequences, respectively, which exhibited the highest GC content. Therefore, designing MBs with a high GC content is an effective solution to overcome the low hybridization efficiency of cLAMP assays. The results obtained can be used as primary data for designing MBs to improve cLAMP accessibility.

Microfluidics in smart food safety

The evolution of food safety practices is crucial in addressing the challenges posed by a growing global population and increasingly complex food supply chains. Traditional methods are often labor-intensive, time-consuming, and susceptible to human error. This chapter explores the transformative potential of integrating microfluidics into smart food safety protocols. Microfluidics, involving the manipulation of small fluid volumes within microscale channels, offers a sophisticated platform for developing miniaturized devices capable of complex tasks. Combined with sensors, actuators, big data analytics, artificial intelligence, and the Internet of Things, smart microfluidic systems enable real-time data acquisition, analysis, and decision-making. These systems enhance control, automation, and adaptability, making them ideal for detecting contaminants, pathogens, and chemical residues in food products. The chapter covers the fundamentals of microfluidics, its integration with smart technologies, and its applications in food safety, addressing the challenges and future directions in this field.

Isothermal amplification-based microfluidic devices for detecting foodborne pathogens: a review

The gold standard for nucleic acid amplification-based diagnosis is the polymerase chain reaction (PCR). The PCR recognizes the targets such as foodborne pathogens by amplifying their specific genes. The integration of nucleic acid amplification-based assays on microfluidic platforms represents a highly promising solution for convenient, cheap, and effective control of foodborne pathogens. However, the application of the PCR is limited to on-site detection because the method requires sophisticated equipment for temperature control, which makes it complicated for microfluidic integration. Alternatively, isothermal amplification methods are promising tools for integrating microfluidic platforms for on-site detection of foodborne pathogens. This review summarized advances in isothermal amplification-based microfluidic devices for detecting foodborne pathogens. Different nucleic acid extraction approaches and the integration of these approaches in microfluidic platforms were first reviewed. Microfluidic platforms integrated with three common isothermal amplification methods including loop-mediated isothermal amplification, recombinase polymerase amplification, and recombinase-aided amplification were then described and discussed.

Evaluation of a novel lysis-based sample processing method to optimize Vibrio vulnificus detecting by loop-mediated isothermal amplification assay

BACKGROUND

Vibrio vulnificus exists as one of the most serious foodborne pathogens for humans, and rapid and sensitive detection methods are needed to control its infections. As an emerging method, The Loop-Mediated Isothermal Amplification (LAMP) assay has been applied to the early detection of various foodborne pathogens due to its high efficiency, but sample preprocessing still prolongs the complete detection. To optimize the detection process, our study established a novel sample preprocessing method that was more efficient compared to common methods.

RESULT

Using V. vulnificus as the detecting pathogen, the water-lysis-based detecting LAMP method shortened the preprocessing time to ≤ 1 min with 100% LAMP specificity; the detection limits of the LAMP assay were decreased to 1.20 × 102 CFU/mL and 1.47 × 103 CFU/g in pure culture and in oyster, respectively. Furthermore, the 100% LAMP specificity and high sensitivity of the water-lysis method were also obtained on detecting V. parahaemolyticus, V. alginolyticus, and P. mirabilis, revealing its excellent LAMP adaption with improvement in sensitivity and efficiency.

CONCLUSION

Our study provided a novel LAMP preprocessing method that was more efficient compared to common methods and possessed the practical potential for LAMP application in the future.

Recent Progress in Nanotechnology-Based Approaches for Food Monitoring

Throughout the food supply chain, including production, storage, and distribution, food can be contaminated by harmful chemicals and microorganisms, resulting in a severe threat to human health. In recent years, the rapid advancement and development of nanotechnology proposed revolutionary solutions to solve several problems in scientific and industrial areas, including food monitoring. Nanotechnology can be incorporated into chemical and biological sensors to improve analytical performance, such as response time, sensitivity, selectivity, reliability, and accuracy. Based on the characteristics of the contaminants and the detection methods, nanotechnology can be applied in different ways in order to improve conventional techniques. Nanomaterials such as nanoparticles, nanorods, nanosheets, nanocomposites, nanotubes, and nanowires provide various functions for the immobilization and labeling of contaminants in electrochemical and optical detection. This review summarizes the recent advances in nanotechnology for detecting chemical and biological contaminations in the food supply chain.

Distance-based paper device using combined SYBR safe and gold nanoparticle probe LAMP assay to detect Leishmania among patients with HIV

Asymptomatic visceral leishmaniasis cases increase continuously, particularly among patients with HIV who are at risk to develop further symptoms of leishmaniasis. A simple, sensitive and reliable diagnosis is crucially needed due to risk populations mostly residing in rural communities with limited resources of laboratory equipment. In this study, a highly sensitive and selective determination of Leishmania among asymptomatic patients with Leishmania/HIV co-infection was achieved to simultaneously interpret and semi-quantify using colorimetric precipitates (gold-nanoparticle probe; AuNP-probe) and fluorescence (SYBR safe dye and distance-based paper device; dPAD) in one-step loop-mediated isothermal amplification (LAMP) assay. The sensitivities and specificities of 3 detection methods were equivalent and had reliable performances achieving as high as 95.5%. Detection limits were 10² parasites/mL (0.0147 ng/µL) which were 10 times more sensitive than other related studies. To empower leishmaniasis surveillance as well as prevention and control, this dPAD combined with SYBR safe and gold nanoparticle probe LAMP assay is reliably fast, simple, inexpensive and practical for field diagnostics to point-of-care settings in resource-limited areas which can be set up in all levels of healthcare facilities, especially in low to middle income countries.

Emerging Bioanalytical Devices and Platforms for Rapid Detection of Pathogens in Environmental Samples

The development of robust bioanalytical devices and biosensors for infectious pathogens is progressing well with the advent of new materials, concepts, and technology. The progress is also stepping towards developing high throughput screening technologies that can quickly identify, differentiate, and determine the concentration of harmful pathogens, facilitating the decision-making process for their elimination and therapeutic interventions in large-scale operations. Recently, much effort has been focused on upgrading these analytical devices to an intelligent technological platform by integrating them with modern communication systems, such as the internet of things (IoT) and machine learning (ML), to expand their application horizon. This review outlines the recent development and applications of bioanalytical devices and biosensors to detect pathogenic microbes in environmental samples. First, the nature of the recent outbreaks of pathogenic microbes such as foodborne, waterborne, and airborne pathogens and microbial toxins are discussed to understand the severity of the problems. Next, the discussion focuses on the detection systems chronologically, starting with the conventional methods, advanced techniques, and emerging technologies, such as biosensors and other portable devices and detection platforms for pathogens. Finally, the progress on multiplex assays, wearable devices, and integration of smartphone technologies to facilitate pathogen detection systems for wider applications are highlighted.

Capping Gold Nanoparticles to Achieve a Protein-like Surface for Loop-Mediated Isothermal Amplification Acceleration and Ultrasensitive DNA Detection

Loop-mediated isothermal amplification (LAMP) is a popular DNA amplification method. Gold nanoparticles (AuNPs) were reported to enhance the efficiency of LAMP, although the underlying mechanism remained elusive. Since AuNPs strongly adsorb a range of ligands, preadsorbed ligands cannot be easily displaced. In this work, we systematically investigated the effect of surface-modified AuNPs on LAMP by varying the order of mixing of AuNPs with each reagent in the LAMP system (Mg²⁺, template DNA, dNTPs, primers, and polymerase). Mixing the AuNPs with the primers delayed the LAMP based on SYBR green I fluorescence. While other orders of mixing had little effect, all accelerated the reaction. We then tested other common ligands including polymers (polyethylene glycol and polyvinylpyrrolidone), inorganic ions (Br^-), proteins, glutathione (GSH), and DNA (A₁₅) on AuNP-LAMP. The boosted AuNP performance on LAMP was most obvious when the AuNPs formed a protein-like surface. Finally, using GSH-capped AuNPs, a detection limit of around 100 copies/μL^-1 of target DNA was achieved. This work has identified a ligand-capped AuNP strategy to boost LAMP and yielded a higher sensitivity in DNA sensing, which also deepens our understanding of AuNP-assisted LAMP.

Rapid Detection of Salmonella spp from Meat: Loop Mediated Isothermal Amplification (LAMP)

Loop-mediated isothermal amplification (LAMP) is a novel, high specific and sensitive method which amplifies nucleic acid under isothermal conditions. Salmonella is considered one of the threatening pathogens in food industries and these species are associated with distinct food poisoning called salmonellosis. Four primers (two outer and two inner primers) were designed to target six distinct regions on the target gene invA which is conserved in Salmonella species. The reaction was optimised for 60 mins at 65 ̊C. The sensitivity of the LAMP and PCR assay for Salmonella was 10 CFU/ml and 100 CFU/ml respectively. Artificial spiking of chicken meat shows detection of Salmonella even at dilution to extinction (<1 CFU/ml) immediately after spiking as well after 48hr enrichment. All the LAMP experiments were compared to PCR method. This study reports the development of a highly sensitive, specific and a rapid diagnostic assay for the detection of Salmonella from food. The developed method could be very useful for routine pathogens point of care (POC) diagnostics.

New insights for integration of nano particle with microfluidic systems for sensor applications

A biosensor is a compact device, which utilizes biological derived recognition component, immobilized on a transducer to analyze an analyte. Nanoparticles with their unique chemical and physical properties are versatile in their applications to develop as sensors. Different nanoparticles play different roles in the sensing systems like metal and metal oxide nanoparticles. The application of Gold, Silver and Copper nanoparticles will be discussed in brief. The nanoparticles typically function as substrates for immobilization of biomolecules, as catalytic agent, electron transfer agent between electrode surface and the biomolecules, and as reactants. Microfluidic deals with manipulating very small volumes of fluids (micro and nanoliters). This miniaturized platform enhances control of flow conditions and mixing rate of fluids. The microfluidics improves the sensitivity of the analysis, and reduces the volumes of sample and reagent in the analysis. The review specifically aims at representing microfluidics-based sensors and nanoparticle based sensors. This review will also focus on probable merger of these two fields to take advantage of both the fields and this will help in pushing the boundaries of these fields further more.

Naked-eye detection strategies coupled with isothermal nucleic acid amplification techniques for the detection of human pathogens

Nucleic acid amplification-based techniques have gained acceptance by the scientific, and general, community as reference methodologies for many different applications. Since the development of the gold standard of these techniques, polymerase chain reaction (PCR), back in the 1980s many improvements have been made, and alternative techniques emerged reporting improvements over PCR. Among these, isothermal amplification approaches resulted of particular interest as could overcome the need of specialized equipment to accurately control temperature changes, but it was after year 2000 that these techniques have flourished in a huge number of novel alternatives with many different degrees of complexities and requirements. An added value is their possibility to be combined with many different naked-eye detection strategies, simplifying the resources needed, allowing to reduce cost, and serving as the basis for novel developments of lab-on-chip systems, and miniaturized devices, for point-of-care testing. In this review, we will go over different types of naked-eye detection strategies, combined with isothermal amplification. This will provide the readers up-to-date information for them to select the most appropriate strategies depending on the particular needs and resources for their experimental setup.

A low-cost, portable, and practical LAMP device for point-of-diagnosis in the field

Transition of rapid, ready-to-use, and low-cost nucleic acid-based detection technologies from laboratories to points of sample collection has drastically accelerated. However, most of these approaches are still incapable of diagnosis starting from sampling, through nucleic acid isolation and detection in the field. Here, we developed a simple, portable, low-cost, colorimetric, and remotely controllable platform for reliable, high-throughput, and rapid diagnosis using loop mediated isothermal amplification (LAMP) assays. It consists of a thermally isolated cup, low-cost electronic components, a polydimethylsiloxane sample well, and a fast prototyped case that covers electronic components. The steady-state temperature error of the system is less than 1%. We performed LAMP, Colony-LAMP, and Colony PCR reactions using the yaiO₂ primer set for Escherichia coli and Pseudomonas aeruginosa samples at 65˚C and 30 min. We detected the end-point colorimetric readouts by the naked eye under day light. We confirmed the specificity and sensitivity of our approach using pure genomic DNA and crude bacterial colonies. We benchmarked our Colony-LAMP detection against Colony PCR. The number of samples tested can easily be modified for higher throughput in our system. We strongly believe that our platform can greatly contribute rapid and reliable diagnosis in versatile operational environments. This article is protected by copyright. All rights reserved.

Loop-Mediated Isothermal Amplification assays for on-site detection of the main sweetpotato infecting viruses

Globally, Sweet potato feathery mottle virus (SPFMV) and Sweet potato chlorotic stunt virus (SPCSV) occur frequently and in combination cause sweetpotato virus disease (SPVD). Many viral diseases are economically important and negatively impact the production and movement of germplasm across regions. Rapid detection of viruses is critical for effective control. Detection and quantification of viruses directly from sweetpotato remains a challenge. Current diagnostic tests are not sensitive enough to reliably detect viruses directly from the plant or require expensive laboratory equipment and expertise to perform. We developed a simple and rapid loop-mediated isothermal amplification (LAMP) assay for the detection of SPFMV, SPCSV and begomoviruses related to sweet potato leaf curl virus (SPLCV). Laboratory validation recorded 100 % diagnostic sensitivity for all the three viruses. The LAMP assays were customized for field testing using a lyophilized thermostable isothermal master mix in a ready-to-use form that required no cold chain. The average time to positivity (TTP) was: SPFMV 5-30 min, SPCSV 15-43 min s and begomoviruses 28-45 mins. LAMP on-site testing results were comparable to PCR and RT-PCR confirmatory laboratory tests. The LAMP assay is a powerful tool for rapid sweetpotato virus detection at a reasonable cost and thus could serve as quality control systems for planting materials.

Combined Loop-Mediated Isothermal Amplification Assays for Rapid Detection and One-Step Differentiation of Campylobacter jejuni and Campylobacter coli in Meat Products

A loop-mediated isothermal amplification (LAMP) assay system was established, allowing rplD gene-based simultaneous detection of Campylobacter jejuni and Campylobacter coli in enriched meat products. Additionally, one-step differentiation of target species on agar plates was enabled by cdtC gene- and gyrA gene-based duplex LAMP. Both the rplD and cdtC–gyrA LAMP assays amplified the target sequences in all 62 C. jejuni and 27 C. coli strains used for determining inclusivity and revealed 100% exclusivity toward 85 tested non-target species. Throughout the entire experiments, C. jejuni and C. coli strains were 100% distinguishable by melting curves of cdtC and gyrA LAMP products. After 24-h enrichment, the rplD LAMP assay reliably detected initial inoculation levels of 10–100 CFU/g in artificially contaminated minced meat. Investigation of naturally contaminated meat samples revealed a diagnostic accuracy of 95% toward real-time PCR and 94.1% toward the standard culture method applying the 24-h incubation period. Diagnostic sensitivity and specificity, and positive and negative predictive values were 89.8, 100, 100, and 91.2%, respectively, when measured against real-time PCR, and 89.6, 98.1, 97.7, and 91.2%, respectively, when measured against the standard culture method. After 48-h enrichment, the detection limit of the rplD LAMP assay improved to initial inoculation levels of 1–10 CFU/g in artificially contaminated minced meat. Applying the 48-h incubation period on naturally contaminated meat samples resulted in 100% concordant results between rplD LAMP, real-time PCR, and the standard culture method. The established LAMP assay system was proved to be suitable for rapid meat sample screening. Furthermore, it constitutes a promising tool for investigating other Campylobacter sources and could therefore make a valuable contribution to protect consumers from foodborne illness.

Heat-enhancing aggregation of gold nanoparticles combined with loop-mediated isothermal amplification (HAG-LAMP) for Plasmodium falciparum detection

Malaria infection represents a major public health and economic issue that leads to morbidity and mortality globally. A highly effective and uncomplicated detection tool is required for malaria control in geographical hotspots of transmission. We developed a simple and more sensitive novel approach for the detection of the 18S rRNA gene of Plasmodium falciparum based on loop-mediated isothermal amplification (LAMP) and visualization using colorimetric, streptavidin-functionalized gold nanoparticles (SA-GNPs). Two loop primers of LAMP were biotinylated to produce biotin-containing products during amplification. After the addition of SA-GNPs, clusters of avidin-biotin complexes were established in the LAMP structure. While the positive reactions remained wine red, the negative reactions became colorless with partial aggregations induced by hydrochloric acid (HCl) under heat enhancement (60 °C). All steps of the assay were completed within 50 min, its detection limit was 1 parasite/μL, and it was highly specific for P. falciparum. This effortless detection system with high sensitivity and specificity could provide an alternative choice for malaria diagnostics in resource-limited regions.

Simultaneous detection of multiple bacterial and viral aquatic pathogens using a fluorogenic loop-mediated isothermal amplification-based dual-sample microfluidic chip

Rapid and user-friendly diagnostic tests are necessary for early diagnosis and immediate detection of diseases, particularly for on-site screening of pathogenic microorganisms in aquaculture. In this study, we developed a dual-sample microfluidic chip integrated with a real-time fluorogenic loop-mediated isothermal amplification assay (dual-sample on-chip LAMP) to simultaneously detect 10 pathogenic microorganisms, that is Aeromonas hydrophila, Edwardsiella tarda, Vibrio harveyi, V. alginolyticus, V. anguillarum, V. parahaemolyticus, V. vulnificus, infectious hypodermal and haematopoietic necrosis virus, infectious spleen and kidney necrosis virus, and white spot syndrome virus. This on-chip LAMP provided a nearly automated protocol that can analyse two samples simultaneously, and the tests achieved limits of detection (LOD) ranging from 10⁰ to 10^-1  pg/μl for genomic DNA of tested bacteria and 10^-4 to 10^-5  pg/μl for recombinant plasmid DNA of tested viruses, with run times averaging less than 30 min. The coefficient of variation for the time-to-positive value was less than 10%, reflecting a robust reproducibility. The clinical sensitivity and specificity were 93.52% and 85.53%, respectively, compared to conventional microbiological or clinical methods. The on-chip LAMP assay provides an effective dual-sample and multiple pathogen analysis, and thus would be applicable to on-site detection and routine monitoring of multiple pathogens in aquaculture.

Microfluidic devices for multiplexed detection of foodborne pathogens

The global burden of foodborne diseases is substantial and foodborne pathogens are the major cause for human illnesses. In order to prevent the spread of foodborne pathogens, detection methods are constantly being updated towards rapid, portable, inexpensive, and multiplexed on-site detection. Due to the nature of the small size and low volume, microfluidics has been applied to rapid, time-saving, sensitive, and portable devices to meet the requirements of on-site detection. Simultaneous detection of multiple pathogens is another key parameter to ensure food safety. Multiplexed detection technology, including microfluidic chip design, offers a new opportunity to achieve this goal. In this review, we introduced several sample preparation and corresponding detection methods on microfluidic devices for multiplexed detection of foodborne pathogens. In the sample preparation section, methods of cell capture and enrichment, as well as nucleic acid sample preparation, were described in detail, and in the section of detection methods, amplification, immunoassay, surface plasmon resonance and impedance spectroscopy were exhaustively illustrated. The limitations and advantages of all available experimental options were also summarized and discussed in order to form a comprehensive understanding of cutting-edge technologies and provide a comparative assessment for future investigation and in-field application.

Ultraviolet-induced in situ gold nanoparticles for point-of-care testing of infectious diseases in loop-mediated isothermal amplification

The present study investigated ultraviolet-induced in situ gold nanoparticles (AuNPs) coupled with loop-mediated isothermal amplification (LAMP) for the point-of-care testing (POCT) of two major infectious pathogens, namely, Coronavirus (COVID-19) and Enterococcus faecium (E. faecium spp.). In the process, gold ions in a gold chloride (HAuCl4) solution were reduced using trisodium citrate (Na3Ct), a reducing agent, and upon UV illumination, red-colored AuNPs were produced in the presence of LAMP amplicons. The nitrogenous bases of the target deoxyribonucleic acid (DNA) acted as a physical support for capturing gold ions dissolved in the sample. The high affinity of gold with the nitrogenous bases enabled facile detection within 10 min, and the detection limit of COVID-19 plasmid DNA was as low as 42 fg μL-1. To ensure POCT, we designed a portable device that contained arrays of reagent chambers and detection chambers. In the portable device, colorimetric reagents such as HAuCl4 and Na3Ct were contained in the reagent chambers; these reagents were subsequently transferred to the detection chambers where LAMP amplicons were present and thus allowed convenient sample delivery and multiplex detection. Owing to the high sensitivity of the in situ AuNPs, simplicity of portable device fabrication, and rapid colorimetric detection, we strongly believe that the fabricated portable device could serve as a kit for rapid POCT for instantaneous detection of infectious diseases, and could be readily usable at the bedside.

Combination of Loop-Mediated Isothermal Amplification and AuNP-Oligoprobe Colourimetric Assay for Pork Authentication in Processed Meat Products

Pork adulteration is a major concern for Muslims and Jews whose diets are restricted by religious beliefs, as well as those who are allergic to pork meat and its derivatives. Accurate pork authentication is of great importance to assist this demographic group of people in making decision on their product purchase. The aim of this study was to develop a new analytical method for pork authentication in processed meat products based on a combination of loop-mediated isothermal amplification (LAMP) and AuNP-nanoprobe colourimetric assay. The LAMP conditions were first optimised to obtain the highest yield of amplified DNA products within the shortest time. Oligoprobe-functionalised AuNPs were then hybridised with LAMP-DNA amplicons and subsequently challenged with MgSO4 at a high concentration to induce AuNP aggregation. In the presence of pork DNA, the colloidal AuNP-probe remained unchanged in its red colour, which indicates the dispersion of AuNPs. In contrast, in the absence of pork DNA, the colour was changed to colourless as a result from the aggregation of AuNPs. The LAMP-AuNP-nanoprobe assay offers a high sensitivity with a limit of detection as low as 100 pg of pork DNA. The assay is highly specific to pork content without cross-reactivity with the other meat species tested. The assay developed herein can become a simple, inexpensive, precise, and rapid analytical tool for small laboratories or the general public interested in halal food authentication.

Rapid and sensitive detection of E. coli O157:H7 and S. Typhimurium in iceberg lettuce and cabbage using filtration, DNA concentration, and qPCR without enrichment

The outbreaks due to the low number of foodborne pathogens present in ready-to-eat products can be prevented by rapid and sensitive detection method. However, as a conventional detection method, it is impossible to monitor foodborne bacteria existing which is less than 50 cfu/25 g in a food. This study was designed to investigate the possibility of detecting 1 cfu in the short-term through filtration, DNA concentration, and qPCR. As a result of the filtration + DNA concentration method, the recovery concentrations of Escherichia coli O157:H7 and Salmonella Typhimurium was not significantly different from initial inoculation (>7 cfu/25 g). In iceberg lettuce and cabbage, this method was able to detect 7 and 7 cfu/25 g of E. coli and 68 and 5 cfu/25 g of S. Typhimurium. We demonstrated the potential of the filtration + DNA concentration method as a shorter time alternative to conventional enrichment-based rapid detection in vegetables.

Application of Recombinase Polymerase Amplification with Lateral Flow for a Naked-Eye Detection of Listeria monocytogenes on Food Processing Surfaces

The continuous contamination of foods with L. monocytogenes, highlights the need for additional controls in the food industry. The verification of food processing plants is key to avoid cross-contaminations, and to assure the safety of the food products. In this study, a new methodology for the detection of L. monocytogenes on food contact surfaces was developed and evaluated. It combines Recombinase Polymerase Amplification (RPA) with the lateral flow (LF) naked-eye detection. Different approaches for the recovery of the bacteria from the surface, the enrichment step and downstream analysis by RPA-LF were tested and optimized. The results were compared with a standard culture-based technique and qPCR analysis. Sampling procedure with sponges was more efficient for the recovery of the bacteria than a regular swab. A 24 h enrichment in ONE broth was needed for the most sensitive detection of the pathogen. By RPA-LF, it was possible to detect 1.1 pg/µL of pure L. monocytogenes DNA, and the complete methodology reached a LoD₅₀ of 4.2 CFU/cm² and LoD₉₅ of 18.2 CFU/cm². These results are comparable with the culture-based methodology and qPCR. The developed approach allows for a next-day detection without complex equipment and a naked-eye visualization of the results.

Profiling DNA mutation patterns by SERS fingerprinting for supervised cancer classification

Profiling DNA mutation patterns for cancer classification plays an essential role in precision and personalized medicine. Conventional PCR-based mutation assay is limited by the extensive labour on target amplification. We herein create an amplification-free surface enhanced Raman spectroscopy (SERS) biochip which enables direct and simultaneous identification of multiple point mutations in tumor cells. Without pre-amplifying the target sequences, the SERS assay reads out the presence of cellular mutations through the interpretation of Raman fingerprints. The SERS sensor is integrated into a microfluidic chip, achieving one-step multiplex analysis within 40 min. Importantly, by combining SERS spectra encoding technique with supervised learning algorithm, a panel of nucleotide mixtures can be well distinguished according to their mutation profiles. We initially demonstrate an excellent levels of classification in samples from colorectal cancer and melanoma cell lines. For final clinical validation, the system performance is verified by classifying cancer patient samples, which shows an accuracy above 90%. Due to the simplicity and rapidness, the SERS biosensor is expected to become a promising tool for clinical point-of-care diagnosis towards precision medicine.

Evaluation and implementation of commercial antibodies for improved nanoparticle-based immunomagnetic separation and real-time PCR for faster detection of Listeria monocytogenes

L. monocytogenes continues to be a major health issue in Europe, as well as worldwide. Faster methods, not only for detection, but also for sample preparation are of great interest particularly for this slow-growing pathogen. Immunomagnetic separation has been previously reported to be an effective way to concentrate bacteria, and remove inhibitors. In the present study, different commercial antibodies were evaluated to select the most appropriate one, in order to develop a highly specific method. Additionally, magnetic nanoparticles, instead of microparticles, were selected due to their reported advantages (higher surface-volume ration and faster kinetics). Finally, the separation protocol, with a calculated capture efficiency of 95%, was combined with real-time PCR for highly sensitive detection of the concentrated bacteria. The optimized IMS-qPCR allowed to reduce hands-on time in the sample treatment, without affecting the overall performance of the method as a very low limit of detection was still obtained (9.7 CFU/ 25 g) with values for sensitivity, specificity, accuracy, positive and negative predictive values of 100%, resulting in a kappa index of concordance of 1.00. These results were obtained in spiked food samples of different types (chicken, fish, milk, hard and fresh cheese), further demonstrating the applicability of the optimized methodology presented.

Multifuntional Gold Nanoparticles for the SERS Detection of Pathogens Combined with a LAMP-in-Microdroplets Approach

We developed a droplet-based optofluidic system for the detection of foodborne pathogens. Specifically, the loop-mediated isothermal amplification (LAMP) technique was combined with surface-enhanced Raman scattering (SERS), which offers an excellent method for DNA ultradetection. However, the direct SERS detection of DNA compromises the simplicity of data interpretation due to the variability of its SERS fingerprints. Therefore, we designed an indirect SERS detection method using multifunctional gold nanoparticles (AuNPs) based on the formation of pyrophosphate generated during the DNA amplification by LAMP. Towards this goal, we prepared multifunctional AuNPs involving three components with key roles: (1) thiolated poly(ethylene glycol) as stabilizing agent, (2) 1-naphthalenethiol as Raman reporter, and (3) glutathione as a bioinspired chelating agent of magnesium (II) ions. Thus, the variation in the SERS signal of 1-naphthalenethiol was controlled by the aggregation of AuNPs triggered by the complexation of pyrophosphate and glutathione with free magnesium ions. Using this strategy, we detected Listeria monocytogenes, not only in buffer, but also in a food matrix (i.e., ultra-high temperaturemilk) enabled by the massive production of hotspots as a result of the self-assemblies that enhanced the SERS signal. This allowed the development of a microdroplet-LAMP-SERS platform with isothermal amplification and real-time identification capabilities.

Multifuntional Gold Nanoparticles for the SERS Detection of Pathogens Combined with a LAMP-in-Microdroplets Approach

We developed a droplet-based optofluidic system for the detection of foodborne pathogens. Specifically, the loop-mediated isothermal amplification (LAMP) technique was combined with surface-enhanced Raman scattering (SERS), which offers an excellent method for DNA ultradetection. However, the direct SERS detection of DNA compromises the simplicity of data interpretation due to the variability of its SERS fingerprints. Therefore, we designed an indirect SERS detection method using multifunctional gold nanoparticles (AuNPs) based on the formation of pyrophosphate generated during the DNA amplification by LAMP. Towards this goal, we prepared multifunctional AuNPs involving three components with key roles: (1) thiolated poly(ethylene glycol) as stabilizing agent, (2) 1-naphthalenethiol as Raman reporter, and (3) glutathione as a bioinspired chelating agent of magnesium (II) ions. Thus, the variation in the SERS signal of 1-naphthalenethiol was controlled by the aggregation of AuNPs triggered by the complexation of pyrophosphate and glutathione with free magnesium ions. Using this strategy, we detected Listeria monocytogenes, not only in buffer, but also in a food matrix (i.e., ultra-high temperaturemilk) enabled by the massive production of hotspots as a result of the self-assemblies that enhanced the SERS signal. This allowed the development of a microdroplet-LAMP-SERS platform with isothermal amplification and real-time identification capabilities.

Development of a test kit for visual loop-mediated isothermal amplification of Salmonella in spiked ready-to-eat fruits and vegetables

The purpose of this study was to assemble two types of loop-mediated isothermal amplification (LAMP) kit that have the ability to visually detect Salmonella in ready-to-eat fruits and vegetables. The reaction results were obtained within 20-40 min after addition of DNA and can be discerned by the naked eye or an amplification plot. The stability of the LAMP wet kit was evident after multiple freezing and thawing cycles, and the one-step LAMP lyophilized kit was further evolved to allow ambient temperature transport for deployment in resource-limited settings. The cost-effective wet kit had the ability to detect minimum amounts of 1.8 CFU/ml Salmonella DNA without enrichment, while the sensitivity of the one-step LAMP lyophilized kit was only 9.8 × 10³ CFU/ml. They both have good anti-interference, as they were both able to detect 2.1 × 10² CFU/ml Salmonella mixed with 10⁶ CFU/ml four non-Salmonella strain mixture. Moreover, cucumber and lettuce that were contaminated with an initial inoculation of 1.7 CFU of Salmonella/10 g showed detection within a reaction time of 30 min after 10 h enrichment. The present research setup is a convenient and practical kit for Salmonella rapid detection that has good application prospects in food safety monitoring.

Loop-mediated isothermal amplification (LAMP) for rapid detection of L. monocytogenes in meat

There is a continued need to develop improved rapid methods for detection of foodborne pathogens. Rapid and sensitive methods for enumeration of Listeria monocytogenes are important for microbiological food safety testing purpose. The aim of this project was to evaluate a commercial loop-mediated isothermal amplification (LAMP) based system with bioluminescence, named as 3M™ Molecular Detection Assay (MDA), was validated for the detection of L. monocytogenes in food products with a standard GOST 32031-2012 method as reference. The results of this study revealed that a commercial LAMP-based method performed equally effective compared with method, showing from 94% to 100% specificity and sensitivity, respectively. The LAMP-based method was shown to be rapid and reliable detection technique for L. monocytogenes present at low numbers (10 CFU.g-1) on raw meat and meat products and can be applicable in meat industry. Thus, compared with the microbiological method based GOST 32031-2012, the LAMP assay is a relatively rapid and highly sensitive method for detecting L. monocytogenes and will facilitate the surveillance for contamination of L. monocytogenes in food. The 3M MDS result and culture-based detection (GOST 32031-2012) did not differ significantly (p >0.05) regarding the number of positive samples.

Combination of Immunomagnetic Separation and Real-Time Recombinase Polymerase Amplification (IMS-qRPA) for Specific Detection of Listeria monocytogenes in Smoked Salmon Samples

Nowadays, Listeria monocytogenes continues to be a major health issue. Therefore, improvements in the speed and reliability of its detection are still needed. In the present study, the combination of real-time Recombinase Polymerase Amplification (qRPA) with immunomagnetic separation (IMS) is described. The proposed methodology was tested against a real-time PCR method, and was successfully applied to 50 smoked salmon samples spiked at levels ranging from 2 to 9.3 × 10² cfu/25 g. L. monocytogenes was detected after a 24 hr pre-enrichment, which represents a great improvement over other previously published RPA methods. Additionally, the evaluation of the method reported a Limit of dDetection 50 (LoD₅₀ ) of 6.3 cfu/25 g, along with relative sensitivity, specificity and accuracy values higher than 90%. Finally, the index of kappa concordance was calculated to be 0.93 which is interpreted as "almost complete concordance" between the reference and alternative method. Overall, the described methodology proved to be faster, specific, and as sensitive as other methods based on RPA or real-time PCR. PRACTICAL APPLICATION: The methodology described in this study significantly reduces the detection time of L. monocytogenes, when compared with culture-based methods, and it requires fewer steps than other molecular methods, making it a reliable and more convenient method for routine testing. Finally, the evaluation of the methodology in spiked food samples, confirms its reliability.

Microfluidic-Based Nucleic Acid Amplification Systems in Microbiology

Rapid, sensitive, and selective bacterial detection is a hot topic, because the progress in this research area has had a broad range of applications. Novel and innovative strategies for detection and identification of bacterial nucleic acids are important for practical applications. Microfluidics is an emerging technology that only requires small amounts of liquid samples. Microfluidic devices allow for rapid advances in microbiology, enabling access to methods of amplifying nucleic acid molecules and overcoming difficulties faced by conventional. In this review, we summarize the recent progress in microfluidics-based polymerase chain reaction devices for the detection of nucleic acid biomarkers. The paper also discusses the recent development of isothermal nucleic acid amplification and droplet-based microfluidics devices. We discuss recent microfluidic techniques for sample preparation prior to the amplification process.

Amplification-free SERS analysis of DNA mutation in cancer cells with single-base sensitivity

Accurate and sensitive identification of DNA mutations in tumor cells is critical to the diagnosis, prognosis and personalized therapy of cancer. Conventional polymerase chain reaction (PCR)-based methods are limited by the complicated amplification process. Herein, an amplification-free surface enhanced Raman spectroscopy (SERS) approach which directly detects point mutations in cancer cells has been proposed. A highly sensitive and uniform SERS substrate was fabricated using gold@silver core-shell nanorods, achieving an enhancement factor of 1.85 × 106. By combining the SERS-active nanosubstrate with molecular beacon probes, the limit of detection reached as low as 50 fM. To enable parallel analysis and automated operation, the SERS sensor was integrated into a microfluidic chip. This novel chip-based assay was able to differentiate between mutated and wild-type KRAS genes among a variety of other nucleic acids from cancer cells in 40 min. Owing to the simple operation and fast analysis, the SERS-based DNA assay chip could potentially provide insights into clinical cancer theranostics in an easy and inexpensive manner at the point of care.

Loop-mediated isothermal amplification assay as a point-of-care diagnostic tool for Vibrio parahaemolyticus: recent developments and improvements

INTRODUCTION

A number of DNA-based diagnostic tools have been developed for the detection of Vibrio parahaemolyticus in seafood. However, the loop-mediated isothermal amplification (LAMP) has distinct advantages with regards to its simplicity, speed and the ease of performing without any need for sophisticated equipment. Over the last decade, LAMP has emerged as a potential tool for the detection of V. parahaemolyticus. Area covered: The literature search was restricted to LAMP assay and its variants for the detection of V. parahaemolyticus. The focus in this review is to enlist the various techniques that have been developed using the principle of the LAMP towards improved simplicity, sensitivity and specificity of the assay. Expert commentary: LAMP assay and its variants are significantly faster and require minimum accessories compared to other DNA based molecular techniques such as PCR and their types. Despite the availability of several versions, LAMP-based diagnostics is not the first choice for the detection of V. parahaemolyticus in the seafood sector. Our recommendation would be to explore the possibilities of developing cost-effective LAMP kits and implementing these kits as point-of-care diagnostic tools for rapid and sensitive detection of pathogenic V. parahaemolyticus.

Loop-Mediated Isothermal Amplification for Salmonella Detection in Food and Feed: Current Applications and Future Directions

Loop-mediated isothermal amplification (LAMP) has become a powerful alternative to polymerase chain reaction (PCR) for pathogen detection in clinical specimens and food matrices. Nontyphoidal Salmonella is a zoonotic pathogen of significant food and feed safety concern worldwide. The first study employing LAMP for the rapid detection of Salmonella was reported in 2005, 5 years after the invention of the LAMP technology in Japan. This review provides an overview of international efforts in the past decade on the development and application of Salmonella LAMP assays in a wide array of food and feed matrices. Recent progress in assay design, platform development, commercial application, and method validation is reviewed. Future perspectives toward more practical and wider applications of Salmonella LAMP assays in food and feed testing are discussed.