Genomic Modeling as an Approach to Identify Surrogates for Use in Experimental Validation of SARS-CoV-2 and HuNoV Inactivation by UV-C Treatment

Evaluating the Performance of UV Disinfection across the 222-365 nm Spectrum against Aerosolized Bacteria and Viruses

Bioaerosols play a significant role in the transmission of many infectious diseases, especially in enclosed indoor environments. Ultraviolet (UV) disinfection has demonstrated a high efficacy in inactivating microorganisms suspended in the air. To develop more effective and efficient UV disinfection protocols, it is necessary to evaluate and optimize the effectiveness of UV disinfection against aerosolized bacteria and viruses across the entire UV spectrum. In this study, we evaluated the performance of UV disinfection across the UV spectrum, ranging from 222 to 365 nm, against aerosolized bacteria and viruses, including Escherichia coli, Staphylococcus epidermidis, Salmonella enterica, MS2, P22, and Phi6. Six commonly available UV sources, including gas discharge tubes and light-emitting diodes with different emission spectra, were utilized, and their performance in terms of inactivation efficacy, action spectrum, and energy efficiency was determined. Among these UV sources, the krypton chloride excilamp emitting at a peak wavelength of 222 nm was the most efficient in inactivating viral bioaerosols. A low-pressure mercury lamp emitting at 254 nm performed well on both inactivation efficacy and energy efficiency. A UV light-emitting diode emitting at 268 nm demonstrated the highest bacterial inactivation efficacy, but required approximately 10 times more energy to achieve an equivalent inactivation level compared with that of the krypton chloride excilamp and low-pressure mercury lamp. This study provides insights into UV inactivation on bioaerosols, which can guide the development of effective wavelength-targeted UV air disinfection technologies and may significantly help reduce bioaerosol transmission in public areas.

Ultraviolet germicidal irradiation: A prediction model to estimate UV-C-induced infectivity loss in single-strand RNA viruses

Ultraviolet germicidal irradiation (UVGI) disinfection technology is effective in inactivating microorganisms. However, its performance can vary against different microorganisms due to their diverse structural and genomic features. Thus, rapid predictions of UV (254 nm) inactivation kinetics are essential, particularly for highly infectious emerging pathogens, such as SARS-CoV-2, during the extemporary COVID-19 pandemic. In this study, aiming at single-strand RNA (ssRNA) viruses, an improved genomic model was introduced to predict the UV inactivation kinetics of viral genomes using genome sequence data. First, the overall virus infectivity loss in an aqueous matrix was estimated as the sum of damage to both the entire genome and the protein capsid. Then, the "UV rate constant ratio of aerosol and liquid" was used to convert the UV rate constant for viruses in a liquid-based matrix to an airborne state. The prediction model underwent both quantitative and qualitative validation using experimental data from this study and the literature. Finally, with the goal of mitigating potential airborne transmission of ssRNA viruses in indoor environments, this paper summarizes existing in-duct UVGI system designs and evaluates their germicidal performance. The prediction model may serve as a preliminary tool to assess the effectiveness of a UVGI system for emerging or unculturable viruses or to estimate the required UV dose when designing such a system.

A review on sterilization methods of environmental decontamination to prevent the coronavirus SARS-CoV-2 (COVID-19 virus): A new challenge towards eco-friendly solutions

In recent years, the COVID-19 pandemic is currently wreaking havoc on the planet. SARS-CoV-2, the Severe Acute Respiratory Syndrome Coronavirus, is the current term for this outbreak. Reports about this novel coronavirus have been presented since the pandemic's breakout, and they have demonstrated that it transmits rapidly from person to person, primarily by droplets in the air. Findings have illustrated that SARS-CoV-2 can survive on surfaces from hours to days. Therefore, it is essential to find practical solutions to reduce the virus's impact on human health and the environment. This work evaluated common sterilization methods that can decontaminate the environment and items. The goal is that healthcare facilities, disease prevention organizations, and local communities can overcome the new challenge of finding eco-friendly solutions. Further, a foundation of information encompassing various sterilization procedures and highlighting their limits to choose the most appropriate method to stop disease-causing viruses in the new context has been presented. The findings of this crucial investigation contribute to gaining insight into the comprehensive sterilization approaches against the coronavirus for human health protection and sustainable environmental development.

Ultraviolet-C light at 222 nm has a high disinfecting spectrum in environments contaminated by infectious pathogens, including SARS-CoV-2

Ultraviolet light (UV) acts as a powerful disinfectant and can prevent contamination of personal hygiene from various contaminated environments. The 222-nm wavelength of UV-C has a highly effective sterilization activity and is safer than 275-nm UV-C. We investigated the irradiation efficacy of 222-nm UV-C against contaminating bacteria and viruses in liquid and fabric environments. We conducted colony-forming unit assays to determine the number of viable cells and a 50% tissue culture infectious dose assay to evaluate the virus titration. A minimum dose of 27 mJ/cm2 of 222-nm UV-C was required for >95% germicidal activity for gram-negative and -positive bacteria. A 25.1 mJ/cm2 dose could ensure >95% virucidal activity against low-pathogenic avian influenza virus and severe acute respiratory syndrome coronavirus (SARS-CoV-2). In addition, this energy dose of 222-nm UV-C effectively inactivated SARS-CoV-2 variants, Delta and Omicron. These results provide valuable information on the disinfection efficiency of 222-nm UV-C in bacterial and virus-contaminated environments and can also develop into a powerful tool for individual hygiene.

Solar desalination/purification (solar stills, humidification-dehumidification, solar disinfection) in high altitude during COVID19: Insights of gastrointestinal manifestations and systems' mechanism

From the starting of the pandemic different transmission routes of the pathogen was brought into the spotlight by researchers from different disciplines. This matter in high-altitudes was more boosted as the main parameters were not exactly realized. In this review we are about to highlight the possibility of consuming contaminated water generated form solar water desalination/disinfection systems in highlands. Three systems including solar still, solar disinfection (which experimented by the authors in 2019 in high altitude) and humidification-dehumidification were consider in this context. Ascribe to the risks of pathogens transmission in solar desalination/disinfection systems where the water resources are heavily polluted in every corner of the world, highlighting the risk of consuming water in high-altitude where there are many other parameters associated with spread of pathogen is of great importance. As it was reported, reliability of solar desalination and solar water disinfections systems against contaminated water by the novel coronavirus remained on the question because the virus can be transmitted by vapor in solar stills due to tiny particle size (60-140 nm) and would not be killed by solar disinfections due to low-temperature of operation <40 °C while for HDH contamination of both water and air by sars-cov-2 could be a concern. Although the SARS-CoV-2 is not a waterborne pathogen, its capability to replicate in stomach and infection of gastrointestinal glandular suggested the potential of transmission via fecal-oral. Eventually, it was concluded that using solar-based water treatment as drinking water in high altitude regions should be cautiously consider and recommendations and considerations are presented. Importantly, this critical review not only about the ongoing pandemic, but it aims is to highlight the importance of produced drinking water by systems for future epidemic/pandemic to prevent spread and entering a pathogen particularly in high-altitude regions via a new routes.

Evaluation of the effectiveness of UV-C dose for photoinactivation of SARS-CoV-2 in contaminated N95 respirator, surgical and cotton fabric masks

As part of efforts to combat the Covid-19 pandemic and decrease the high transmissibility of the new coronavirus, SARS-CoV-2, effective inactivation strategies, such as UV-C decontamination technologies, can be reliably disseminated and well-studied. The present study investigated the susceptibility of a high viral load of SARS-CoV-2 in filtering facepiece respirators (FFR) N95, surgical mask, cotton fabric mask and N95 straps under three different doses of UV-C, applying both real-time PCR (qPCR) and plaque formation assays to quantify viral load reduction and virus infectivity, respectively. The results show that more than 95% of the amount of SARS-CoV-2 RNA could be reduced after 10 min of UV-C exposure (0.93 J cm^-2 per side) in FFR N95 and surgical masks and, after 5 min of UV-C treatment (0.46 J cm^-2 per side) in fabric masks. Furthermore, the analysis of viable coronaviruses after these different UV-C treatments demonstrated that the lowest applied dose is sufficient to decontaminate all masks ([Formula: see text] 3-log₁₀ reduction of the infective viral load, > 99.9% reduction). However, for the elastic strap of N95 respirators, a UV-C dose three times greater than that used in masks (1.4 J cm^-2 per side) is required. The findings suggest that the complete decontamination of masks can be performed effectively and safely in well-planned protocols for pandemic crises or as strategies to reduce the high consumption and safe disposal of these materials in the environment.

Murine Hepatitis Virus, a Biosafety Level 2 Model for SARS-CoV-2, Can Remain Viable on Meat and Meat Packaging Materials for at Least 48 Hours

In 2020 and 2021, many meat processing plants faced temporary closures due to outbreaks of COVID-19 cases among the workers. There are several factors that could potentially contribute to the increased numbers of COVID-19 cases in meat processing plants: the survival of viable SARS-CoV-2 on meat and meat packaging materials, difficulties in maintaining workplace physical distancing, personal hygiene, and crowded living and transportation conditions. In this study, we used murine hepatitis virus (MHV) as a biosafety level 2 (BSL2) surrogate for SARS-CoV-2 to determine viral survival on the surface of meat, namely, stew-cut beef and ground beef, and commonly used meat packaging materials, such as plastic wrap, meat-absorbent material, and Styrofoam. From our studies, we observed the infectivity of MHV inoculated on ground beef and stew-cut beef for 48 h and saw no significant loss in infectivity for MHV from 0 to 6 h postinoculation (hpi) (unpaired t test). However, beginning at 9 hpi, viral infectivity steadily decreased, resulting in a 1.12-log reduction for ground beef and a 0.46-log reduction for stew-cut beef by 48 hpi. We also observed a significant persistence of MHV on meat packaging materials, with Styrofoam supporting the highest viability (3.25 × 103 ± 9.57 × 102 PFU/mL, a 0.91-log reduction after 48 hpi), followed by meat-absorbent material (75 ± 50 PFU/mL, a 1.10-log reduction after 48 hpi), and lastly, plastic wrap (no detectable PFU after 3 hpi, a 3.12-log reduction). Despite a notable reduction in infectivity, the virus was able to survive and remain infectious for up to 48 h at 7°C on four of the five test surfaces. Our results provide evidence that coronaviruses, such as SARS-CoV-2, could potentially survive on meat, meat-absorbent materials. and Styrofoam for up to 2 days, and potentially longer. IMPORTANCE The meat industry has been faced with astronomical challenges with the rampant spread of COVID-19 among meat processing plant workers. This has resulted in meat processing and packaging plant closures, creating bottlenecks everywhere in the chain, from farms to consumers, subsequently leading to much smaller production outputs and higher prices for all parties involved. This study tested the viability of meat and meat packaging materials as potential reservoirs for SARS-CoV-2, allowing the virus to survive and potentially spread among the workers. We used murine hepatitis virus (MHV) as a biosafety level 2 (BSL2) surrogate for SARS-CoV-2. Our results suggest that ground beef, stew-cut beef, meat-absorbent material, and Styrofoam can harbor coronavirus particles, which can remain viable for at least 48 h. Furthermore, our study provides evidence that the environmental and physical conditions within meat processing facilities can facilitate the survival of viable virus.

UV222 disinfection of SARS-CoV-2 in solution

There is an urgent need for evidence-based engineering controls to reduce transmission of SARS-CoV-2, which causes COVID-19. Although ultraviolet (UV) light is known to inactivate coronaviruses, conventional UV lamps contain toxic mercury and emit wavelengths (254 nm) that are more hazardous to humans than krypton chlorine excimer lamps emitting 222 nm (UV222). Here we used culture and molecular assays to provide the first dose response for SARS-CoV-2 solution exposed to UV222. Culture assays (plaque infectivity to Vero host) demonstrated more than 99.99% disinfection of SARS-CoV-2 after a UV222 dose of 8 mJ/cm2 (pseudo-first order rate constant = 0.64 cm2/mJ). Immediately after UV222 treatment, RT-qPCR assays targeting the nucleocapsid (N) gene demonstrated ~ 10% contribution of N gene damage to disinfection kinetics, and an ELISA assay targeting the N protein demonstrated no contribution of N protein damage to disinfection kinetics. Molecular results suggest other gene and protein damage contributed more to disinfection. After 3 days incubation with host cells, RT-qPCR and ELISA kinetics of UV222 treated SARS-CoV-2 were similar to culture kinetics, suggesting validity of using molecular assays to measure UV disinfection without culture. These data provide quantitative disinfection kinetics which can inform implementation of UV222 for preventing transmission of COVID-19.

UV 254 nm is more efficient than UV 222 nm in inactivating SARS-CoV-2 present in human saliva

Ultraviolet (UV) light can inactivate SARS-CoV-2. However, the practicality of UV light is limited by the carcinogenic potential of mercury vapor-based UV lamps. Recent advances in the development of krypton chlorine (KrCl) excimer lamps hold promise, as these emit a shorter peak wavelength (222 nm), which is highly absorbed by the skin's stratum corneum and can filter out higher wavelengths. In this sense, UV 222 nm irradiation for the inactivation of virus particles in the air and surfaces is a potentially safer option as a germicidal technology. However, these same physical properties make it harder to reach microbes present in complex solutions, such as saliva, a critical source of SARS-CoV-2 transmission. We provide the first evaluation for using a commercial filtered KrCl excimer light source to inactivate SARS-CoV-2 in saliva spread on a surface. A conventional germicidal lamp (UV 254 nm) was also evaluated under the same condition. Using plaque-forming units (PFU) and Median Tissue Culture Infectious Dose (TCID₅₀) per milliliter we found that 99.99% viral clearance (LD_99.99) was obtained with 106.3 mJ/cm² of UV 222 nm for virus in DMEM and 2417 mJ/cm² for virus in saliva. Additionally, our results showed that the UV 254 nm had a greater capacity to inactivate the virus in both vehicles. Effective (after discounting light absorption) LD_99.99 of UV 222 nm on the virus in saliva was ∼30 times higher than the value obtained with virus in saline solution (PBS), we speculated that saliva might be protecting the virus from surface irradiation in ways other than just by intensity attenuation of UV 222 nm. Due to differences between UV 222/254 nm capacities to interact and be absorbed by molecules in complex solutions, a higher dose of 222 nm will be necessary to reduce viral load in surfaces with contaminated saliva.

Tuning riboflavin derivatives for photodynamic inactivation of pathogens

The development of effective pathogen reduction strategies is required due to the rise in antibiotic-resistant bacteria and zoonotic viral pandemics. Photodynamic inactivation (PDI) of bacteria and viruses is a potent reduction strategy that bypasses typical resistance mechanisms. Naturally occurring riboflavin has been widely used in PDI applications due to efficient light-induced reactive oxygen species (ROS) release. By rational design of its core structure to alter (photo)physical properties, we obtained derivatives capable of outperforming riboflavin's visible light-induced PDI against E. coli and a SARS-CoV-2 surrogate, revealing functional group dependency for each pathogen. Bacterial PDI was influenced mainly by guanidino substitution, whereas viral PDI increased through bromination of the flavin. These observations were related to enhanced uptake and ROS-specific nucleic acid cleavage mechanisms. Trends in the derivatives' toxicity towards human fibroblast cells were also investigated to assess viable therapeutic derivatives and help guide further design of PDI agents to combat pathogenic organisms.

Investigation of mouse hepatitis virus strain A59 inactivation under both ambient and cold environments reveals the mechanisms of infectivity reduction following UVC exposure

The surface contamination of SARS-CoV-2 is becoming a potential source of virus transmission during the pandemic of COVID-19. Under the cold environment, the infection incidents would be more severe with the increase of virus survival time. Thus, the disinfection of contaminated surfaces in both ambient and cold environments is a critical measure to restrain the spread of the virus. In our study, it was demonstrated that the 254 nm ultraviolet-C (UVC) is an efficient method to inactivate a coronavirus, mouse hepatitis virus strain A59 (MHV-A59). The inactivation rate to MHV-A59 coronavirus was up to 99.99% when UVC doses were 2.90 and 14.0 mJ/cm² at room temperature (23 °C) and in cold environment (-20 °C), respectively. Further mechanistic study demonstrated that UVC could induce spike protein damage to partly impede virus attachment and genome penetration processes, which contributes to 12% loss of viral infectivity. Additionally, it can induce genome damage to significantly interrupt genome replication, protein synthesis, virus assembly and release processes, which takes up 88% contribution to viral inactivation. With these mechanistic understandings, it will greatly contribute to the prevention and control of the current SARS-CoV-2 transmissions in cold chains (low temperature-controlled product supply chains), public area such as airport, school, and warehouse.

A UV-LED module that is highly effective at inactivating human coronaviruses and HIV-1

Ultraviolet (UV) light has previously been established as useful method of disinfection, with demonstrated efficacy to inactivate a broad range of microorganisms. The advent of ultraviolet light-emitting diodes provides advantages in ease of disinfection, in that there can be delivery of germicidal UV with the same light unit that delivers standard white light to illuminate a room. Herein we demonstrate the efficacy and feasibility of ultraviolet light-emitting diodes as a means of decontamination by inactivating two distinct virus models, human coronavirus 229E and human immunodeficiency virus. Importantly, the same dose of ultraviolet light that inactivated human viruses also elicited complete inactivation of ultraviolet-resistant bacterial spores (Bacillus pumilus), a gold standard for demonstrating ultraviolet-mediated disinfection. This work demonstrates that seconds of ultraviolet light-emitting diodes (UV-LED) exposure can inactivate viruses and bacteria, highlighting that UV-LED could be a useful and practical tool for broad sanitization of public spaces.

UVC LED and Conducting Yarn-Based Heater for a Smart Germicidal Face Mask to Protect against Airborne Viruses

"Wear a mask. Save lives" is the slogan of WHO and all the government agencies over the world to the public. One of the most adopted prevention measures that can limit the spread of the airborne virus in the form of respiratory viral diseases, including the new strain of COVID-19, is wearing a proper mask. If the mask surface is heated to 65 to 70 °C, it could help potentially diminish any viruses or bacteria accumulated. The FAR-Ultraviolet -C (FAR-UV-C) dose for the influenza limit to 254 nm light is ~3 mJ/cm2/hour exposure is not harmful to the human skin and eyes. Here, we propose an intelligent mask served by FAR-UV-C and conducting a yarn-based heater that could potentially be activated in a controlled manner to kill the virus. The effective irradiation intensity for skin application would be under 0.1 µW/cm2. The exposure risk of UV-C is technically prevented by fabricating multi-layered fabrics with multiple functionalities. Along with experimental validation on bacterial filtration efficiency (BFE), tinker cad simulation for circuit design, and comsol multiphysics for temperature profile study, we probed Moisture Management Test (MMT) in addition with cytotoxicity risk by MTT Assay for survivability to ensure safer application potential. This novel proposed design with the germicidal combination of heating and FAR-UV-C models, described here, is promising in retaliating and combating any airborne viruses.

Modeling the efficiency of UV at 254 nm for disinfecting the different layers within N95 respirators

The study presented a Monte Carlo simulation of light transport in eight commonly used filtered facepiece respirators (FFRs) to assess the efficacy of UV at 254 nm for the inactivation of SARS-CoV-2. The results showed different fluence rates across the thickness of the eight different FFRs, implying that some FFR models may be more treatable than others, with the following order being (from most to least treatable): models 1512, 9105s, 1805, 9210, 1870+, 8210, 8110s and 1860, for single side illumination. The model predictions did not coincide well with some previously reported experimental data on virus inactivation when applied to FFR surfaces. The simulations predicted that FFRs should experience higher log reductions (>>6-log) than those observed experimentally (often limited to ~5-log). Possible explanations are virus shielding by aggregation or soiling, and a lack of the Monte Carlo simulations considering near-field scattering effects that can create small, localized regions of low UV photon probability on the surface of the fiber material. If the latter is the main cause in limiting practical UV viral decontamination, improvement might be achieved by exposing the FFR to UV isotropically from all directions, such as by varying the UV source to the FFR surface angle during treatment.

SARS-CoV-2 Ultraviolet Radiation Dose-Response Behavior

Ultraviolet (UV) radiation in the wavelength range 200 nm ≤ λ ≤ 320 nm, which includes both the UV-C and UV-B portions of the spectrum, is known to be effective for inactivation of a wide range of microbial pathogens, including viruses. Previous research has indicated UV-C radiation to be effective for inactivation of severe acute respiratory syndrome coronavirus (SARS-CoV), the virus that caused an outbreak of SARS in 2003. Given the structural similarities of SARS-CoV and SARS-CoV-2, the cause of coronavirus disease 2019 (COVID-19), it is anticipated that UV radiation should be effective for inactivation of SARS-CoV-2 too. Recently published data support this assertion, but only for a narrow set of exposure and matrix conditions. Models based on genomic and other characteristics of viruses have been developed to provide predictions of viral inactivation responses to UV exposure at λ = 254 nm. The predictions of these models are consistent with reported measurements of viral inactivation, including for SARS-CoV-2. As such, current information indicates that UV-C irradiation should be effective for control of SARS-CoV-2, as well as for control of other coronaviruses; however, additional research is needed to quantify the effects of several important process variables, including the wavelength of radiation, the effects of relative humidity on airborne and surface-associated viruses, and the effects of the medium of exposure.

Macrophage biomimetic nanocarriers for anti-inflammation and targeted antiviral treatment in COVID-19

BACKGROUND

The worldwide pandemic of COVID-19 remains a serious public health menace as the lack of efficacious treatments. Cytokine storm syndrome (CSS) characterized with elevated inflammation and multi-organs failure is closely correlated with the bad outcome of COVID-19. Hence, inhibit the process of CSS by controlling excessive inflammation is considered one of the most promising ways for COVID-19 treatment.

RESULTS

Here, we developed a biomimetic nanocarrier based drug delivery system against COVID-19 via anti-inflammation and antiviral treatment simultaneously. Firstly, lopinavir (LPV) as model antiviral drug was loaded in the polymeric nanoparticles (PLGA-LPV NPs). Afterwards, macrophage membranes were coated on the PLGA-LPV NPs to constitute drugs loaded macrophage biomimetic nanocarriers (PLGA-LPV@M). In the study, PLGA-LPV@M could neutralize multiple proinflammatory cytokines and effectively suppress the activation of macrophages and neutrophils. Furthermore, the formation of NETs induced by COVID-19 patients serum could be reduced by PLGA-LPV@M as well. In a mouse model of coronavirus infection, PLGA-LPV@M exhibited significant targeted ability to inflammation sites, and superior therapeutic efficacy in inflammation alleviation and tissues viral loads reduction.

CONCLUSION

Collectively, such macrophage biomimetic nanocarriers based drug delivery system showed favorable anti-inflammation and targeted antiviral effects, which may possess a comprehensive therapeutic value in COVID-19 treatment.

Pulsed Broad-Spectrum UV Light Effectively Inactivates SARS-CoV-2 on Multiple Surfaces and N95 Material

The ongoing SARS-CoV-2 pandemic has resulted in an increased need for technologies capable of efficiently disinfecting public spaces as well as personal protective equipment. UV light disinfection is a well-established method for inactivating respiratory viruses. Here, we have determined that broad-spectrum, pulsed UV light is effective at inactivating SARS-CoV-2 on multiple surfaces in vitro. For hard, non-porous surfaces, we observed that SARS-CoV-2 was inactivated to undetectable levels on plastic and glass with a UV dose of 34.9 mJ/cm2 and stainless steel with a dose of 52.5 mJ/cm2. We also observed that broad-spectrum, pulsed UV light is effective at reducing SARS-CoV-2 on N95 respirator material to undetectable levels with a dose of 103 mJ/cm2. We included UV dosimeter cards that provide a colorimetric readout of UV dose and demonstrated their utility as a means to confirm desired levels of exposure were reached. Together, the results presented here demonstrate that broad-spectrum, pulsed UV light is an effective technology for the in vitro inactivation of SARS-CoV-2 on multiple surfaces.