Environmental Occurrence, Toxicity Concerns, and Degradation of Diazinon Using a Microbial System

Compound-Specific Isotope Analysis Provides Direct Evidence for Identifying the Source of Residual Pesticides Diazinon and Procymidone in the Soil-Plant System

Compound-specific isotope analysis stands as a promising tool for unveiling the behavior of pesticides in agricultural environments. Using the commercial formulations of persistent fungicide procymidone (PRO) and less persistent insecticide diazinon (DIA), respectively, we analyzed the concentration and carbon isotope composition (δ13C) of the residual pesticides through soil incubation experiments in a greenhouse (for 150 days) and lab conditions (for 50-70 days). Our results showed that the magnitude of δ13C variation depends on pesticide specificity, in which PRO in the soil exhibited little variation in δ13C values over the entire incubation times, while DIA demonstrated an increased δ13C value, with the extent of δ13C variability affected by different spiking concentrations, plant presence, and light conditions. Moreover, the pesticides extracted from soils were isotopically overlapped with those from crop lettuce. Ultimately, the isotope composition of pesticides could infer the degradation and translocation processes and might contribute to identifying the source(s) of pesticide formulation in agricultural fields.

24-Epibrassinolide alleviates diazinon oxidative damage by escalating activities of antioxidant defense systems in maize plants

Excessive use of pesticides against pests has contaminated agricultural crops and raised global concerns about food safety. This research investigates the alleviation effects of 24-epibrassinolide (EBL) seed priming on diazinon (DZ) pesticide toxicity. The experiment was conducted with eight groups including control, DZ, EBL (10 µM), EBL (0.1 µM), EBL (0.01 µM), EBL (10 µM) + DZ, EBL (0.1 µM) + DZ, and EBL (0.01 µM) + DZ. Plants grown with the lowest concentration of EBL (0.01 µM) exhibited an upward increase in the activity of SOD, CAT, POD, APX, GR, and GST enzymes under DZ toxicity stress. In contrast, higher concentrations of EBL showed some inhibitory effects on the activity of antioxidant enzymes. In addition, low concentrations of EBL elevated the free radical scavenging capacity (DPPH), iron-reducing antioxidant power (FRAP), photosynthesis rate (Pn), stomatal conductance (Gs) and proline, and protein contents. EBL also reduced lipid peroxidation (MDA levels) in the DZ-exposed plants, leading to membrane integrity. The favorable effects of EBL were more evident when plants were exposed to pesticides than normal growth conditions. The results indicated that EBL seed priming intensifies the antioxidant enzymes system activity, and helps maize plants against toxic effects of DZ under proper concentration.

Peroxymonosulfate assisted pesticide breakdown: Unveiling the potential of a novel S-scheme ZnO@CoFe2O4 photo-catalyst, anchored on activated carbon

A ternary hetero-junction was prepared by anchoring ZnO@CoFe2O4 (ZCF) on activated carbon (AC) and employed as a UV-assisted peroxymonosulfate (PMS) activator to boost the degradation of diazinon (DZN) pesticide. The structure, morphology, and optical properties of the ZCFAC hetero-junction were characterized through a series of techniques. The highest degradation efficiency of DZN (100% in 90 min) was achieved by the PMS-mediated ZCFAC/UV system, superior to other single or binary catalytic systems due to the strong synergistic effect between ZCFAC, PMS, and UV. The operating reaction conditions, synergistic effects, and the possible pathways of DZN degradation were investigated and discussed. Optical analysis showed that the band-gap energy of the ZCFAC hetero-junction not only enhanced the absorption of UV light but also reduced the recombination of photo-induced electron/hole pairs. Both radical and non-radical species (HO•, SO4•-, O2•-, 1O2, and h+) took part in the photo-degradation of DZN, assessed by scavenging tests. It was found that AC as a carrier not only improved the catalytic activity of CF and ZnO nanoparticles and conferred high stability for the catalyst but also played a crucial role in accelerating the catalytic PMS activation mechanism. Moreover, the PMS-mediated ZCFAC/UV system showed good reusability, universality, and practical applicability potential. Overall, this work explored an efficient strategy for the best use of hetero-structure photo-catalysts towards PMS activation to achieve high performance in decontaminating organic compounds.

A Chemiluminescence Enzyme Immunoassay Based on Biotinylated Nanobody and Streptavidin Amplification for Diazinon Sensitive Quantification

The advantages of genetic modification and preferable physicochemical qualities make nanobody (Nb) easy to develop a sensitive and stable immunosensor platform. Herein, an indirect competitive chemiluminescence enzyme immunoassay (ic-CLEIA) based on biotinylated Nb was established for the quantification of diazinon (DAZ). The anti-DAZ Nb, named Nb-EQ1, with good sensitivity and specificity, was obtained from an immunized library via a phage display technique, where the molecular docking results indicated that the hydrogen bond and hydrophobic interactions between DAZ and complementarity-determining region 3 and framework region 2 in Nb-EQ1 played a critical role in the Nb-DAZ affinity processes. Subsequently, the Nb-EQ1 was further biotinylated to generate a bi-functional Nb-biotin, and then an ic-CLEIA was developed for DAZ determination via signal amplification of the biotin-streptavidin platform. The results showed that the proposed method based on Nb-biotin had a high specificity and sensitivity to DAZ, with a relative broader linear range of 0.12-25.96 ng/mL. After being 2-folds dilution of the vegetable samples matrix, the average recoveries were 85.7-113.9% with a coefficient of variation of 4.2-19.2%. Moreover, the results for the analysis of real samples by the developed ic-CLEIA correlated well with that obtained by reference method GC-MS (R² ≥ 0.97). In summary, the ic-CLEIA based on biotinylated Nb-EQ1 and streptavidin recognition demonstrated itself to be a convenient tool for the quantification of DAZ in vegetables.

Rapid Biodegradation of the Organophosphorus Insecticide Acephate by a Novel Strain Burkholderia sp. A11 and Its Impact on the Structure of the Indigenous Microbial Community

The acephate-degrading microbes that are currently available are not optimal. In this study, Burkholderia sp. A11, an efficient degrader of acephate, presented an acephate-removal efficiency of 83.36% within 56 h (100 mg·L^-1). The A11 strain has a broad substrate tolerance and presents a good removal effect in the concentration range 10-1600 mg·L^-1. Six metabolites from the degradation of acephate were identified, among which the main products were methamidophos, acetamide, acetic acid, methanethiol, and dimethyl disulfide. The main degradation pathways involved include amide bond breaking and phosphate bond hydrolysis. Moreover, strain A11 successfully colonized and substantially accelerated acephate degradation in different soils, degrading over 90% of acephate (50-200 mg·kg^-1) within 120 h. 16S rDNA sequencing results further confirmed that the strain A11 gradually occupied a dominant position in the soil microbial communities, causing slight changes in the diversity and composition of the indigenous soil microbial community structure.

Uptake of Soil-Residual Diazinon by Rotational Lettuce under Greenhouse Conditions

Pesticide residue is an increasing concern in rotational crop practices. The pesticide used for the primary crop may re-enter the secondary crop, thus exceeding pesticide levels set by the positive list system (PLS). As such, evaluation of pesticide residue translocated into rotational crops is required for ensuring pesticide safety. In this study, we investigated the residue pattern of diazinon translocated into lettuce as a typical rotational crop in Korea. Diazinon was used to treat greenhouse soil at the maximum annual application rate before crop planting. Diazinon residues in soil and lettuce were investigated using liquid chromatography/tandem mass spectroscopy and a modified quick, easy, cheap, effective, rugged, safe (QuEChERS) method. The limit of quantitation (LOQ) of diazinon was found as 0.005 mg/kg for the plant and soil samples. The recovery of diazinon at the LOQ and 10× the LOQ ranged from 100.2% to 108.7%. The matrix calibration curve showed linearity, with R2 values > 0.998. Diazinon residue in soil dissipated over time after the initial treatment, generating first-order kinetics (R2 = 0.9534) and having a half-life of about 22 days. The uptake ratio (UTR) of diazinon from the soil to the plant ranged from 0.002 to 0.026 over the harvest period. Considering the UTRs, diazinon residue in the edible leaf could exceed the PLS level (0.01 mg/kg) if lettuce is rotated in soil containing >0.357 mg/kg of diazinon. Based on our findings, to comply with the PLS, a 3-month plant-back interval is required following diazinon treatment and/or setting the maximum residue limit of diazinon for lettuce.

Membrane technology for pesticide removal from aquatic environment: Status quo and way forward

The noxious side effects of pesticides on human health and environment have prompted the search of effective and reliable treatment techniques for pesticide removal. The removal of pesticides can be accomplished through physical, chemical and biologicals. Physical approaches such as filtration and adsorption are prevailing pesticide removal strategies on account of their effectiveness and ease of operation. Membrane-based filtration technology has been recognized as a promising water and wastewater treatment approach that can be used for a wide range of organic micropollutants including pesticides. Nanofiltration (NF), reverse osmosis (RO) and forward osmosis (FO) have been increasingly explored for pesticide removal from aquatic environment owing to their versatility and high treatment efficiencies. This review looks into the remedial strategies of pesticides from aqueous environment using membrane-based processes. The potentials and applications of three prevailing membrane processes, namely NF, RO and FO for the treatment of pesticide-containing wastewater are discussed in terms of the development of advanced membranes, separation mechanisms and system design. The challenges in regards to the practical implementation of membrane-based processes for pesticide remediation are identified. The corresponding research directions and way forward are highlighted. An in depth understanding of the pesticide nature, water chemistry and the pesticide-membrane interactions is the key to achieving high pesticide removal efficiency. The integration of membrane technology and conventional removal technologies represents a new dimension and the future direction for the treatment of wastewater containing recalcitrant pesticides.

Metolachlor adsorption using walnut shell biochar modified by soil minerals

The removal of pesticide residues in soil is a research hotspot. The metolachlor (MET) adsorption by walnut shell biochar (BC) modified with montmorillonite (MBC), illite (IBC), and kaolinite (KBC), as well as the original BC (OBC) was investigated. The characteristics of samples were studied by scanning electron microscopy and mapping analysis, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetry, and chemical stability analysis. The effects of the dosage, ionic strength, and pH, and determined the adsorption kinetics and isotherms for MET with the BCs were analyzed. In addition, response surface methodology regression model analysis was conducted and the adsorption mechanisms were investigated. The results showed that the thermal stability and chemical stability of MBC, IBC, and KBC were higher than those of OBC, and MBC had the greatest stability. The MET adsorption rates of OBC, MBC, IBC, and KBC were 62.15%, 92.47%, 87.97%, and 83.31%, respectively. The kinetic fitting results and adsorption mechanisms showed that the modification of BC with minerals enhanced the physical adsorption of MET. The maximum MET adsorption capacities by OBC, MBC, IBC, and KBC were 39.68 mg g^-1, 68.49 mg g^-1, 65.79 mg g^-1, and 65.36 mg g^-1, respectively. Hydrogen bonds, π-π bonds, coordination bonds, and hydrophobic interactions were the key adsorption mechanisms. Therefore, the mineral-modified BCs were characterized by high adsorption rates and stability. This approach can make BC more efficient, with higher performance as a low cost soil amendment.

Mycodegradation of diazinon pesticide utilizing fungal strains isolated from polluted soil

The current study aimed to isolate biodegradable soil fungi capable of metabolizing diazinon. The collected soil samples were investigated for diazinon pollution to detect the pesticide level in the polluted soil samples. Food poisoning techniques were utilized to preliminary investigate the biodegradation efficiency of the isolated fungal strains to diazinon pesticide using solid and liquid medium and also to detect their tolerance to different concentrations. GC-MS analysis of control and treated flasks were achieved to determine the diazinon residues for confirmation of the biodegradation efficiency. The total diazinon residues in the collected soil samples was found to be 0.106 mg/kg. Out of thirteen fungal strains isolated form diazinon polluted soils, six strains were potentially active in diazinon biodegradation. Food poisoning technique showed that A. niger, B. antennata, F. graminearum, P. digitatum, R. stolonifer and T. viride strains recorded fungal growth diameters of 65.2 ± 0.18, 57.5 ± 0.41, 47.2 ± 0.36, 56.5 ± 0.27, 85.0 ± 0.01, 85.0 ± 0.06 mm respectively in the treated group which were non significantly different compared to that of control (P > 0.05), indicating the high efficiency of these strains in diazinon degradation compared to the other isolated strains. GC-MS analysis revealed that B. antennata was the most efficient strain in diazinon degradation recording 32.24 ± 0.15 ppm concentration after 10 days incubation. Linear regression analysis confirmed that B. antennata was the most effective biodegradable strain recording the highest diazinon dissipation (83.88%) with the lowest T_1/2 value of 5.96 days while T. viride, A. niger, R. stolonifer and F. graminearum exhibited a high biodegradable activities reducing diazinon to 80.26%, 78.22%, 77.36% and 75.43% respectively after 10 days incubation. In conclusion, these tolerant fungi could be considered as promising, eco-friendly and biodegradable fungi for the efficient and potential removal of hazardous diazinon from polluted soil.

Biofilm-mediated bioremediation is a powerful tool for the removal of environmental pollutants

Biofilm-mediated bioremediation is an attractive approach for the elimination of environmental pollutants, because of its wide adaptability, biomass, and excellent capacity to absorb, immobilize, or degrade contaminants. Biofilms are assemblages of individual or mixed microbial cells adhering to a living or non-living surface in an aqueous environment. Biofilm-forming microorganisms have excellent survival under exposure to harsh environmental stressors, can compete for nutrients, exhibit greater tolerance to pollutants compared to free-floating planktonic cells, and provide a protective environment for cells. Biofilm communities are thus capable of sorption and metabolization of organic pollutants and heavy metals through a well-controlled expression pattern of genes governed by quorum sensing. The involvement of quorum sensing and chemotaxis in biofilms can enhance the bioremediation kinetics with the help of signaling molecules, the transfer of genetic material, and metabolites. This review provides in-depth knowledge of the process of biofilm formation in microorganisms, their regulatory mechanisms of interaction, and their importance and application as powerful bioremediation agents in the biodegradation of environmental pollutants, including hydrocarbons, pesticides, and heavy metals.

Nanobioremediation: A sustainable approach for the removal of toxic pollutants from the environment

In recent years, the proportion of organic and inorganic contaminants has increased rapidly due to growing human interference and represents a threat to ecosystems. The removal of these toxic pollutants from the environment is a difficult task. Physical, chemical and biological methods are implemented for the degradation of toxic pollutants from the environment. Among existing technologies, bioremediation in combination with nanotechnology is the most promising and cost-effective method for the removal of pollutants. Numerous studies have shown that exceptional characteristics of nanomaterials such as improved catalysis and adsorption properties as well as high reactivity have been subjects of great interest. There is an emerging trend of employing bacterial, fungal and algal cultures and their components, extracts or biomolecules as catalysts for the sustainable production of nanomaterials. They can serve as facilitators in the bioremediation of toxic compounds by immobilizing or inducing the synthesis of remediating microbial enzymes. Understanding the association between microorganisms, contaminants and nanoparticles (NPs) is of crucial importance. In this review, we focus on the removal of toxic pollutants using the cumulative effects of nanoparticles with microbial technology and their applications in different domains. Besides, we discuss how this novel nanobioremediation technique is significant and contributes towards sustainability.

Novel pathway of acephate degradation by the microbial consortium ZQ01 and its potential for environmental bioremediation

The microbial degradation of acephate in pure cultures has been thoroughly explored, but synergistic metabolism at the community level has rarely been investigated. Here, we report a novel microbial consortium, ZQ01, capable of effectively degrading acephate and its toxic product methamidophos, which can use acephate as a source of carbon, phosphorus and nitrogen. The degradation conditions with consortium ZQ01 were optimized using response surface methodology at a temperature of 34.1 °C, a pH of 8.9, and an inoculum size of 2.4 × 10⁸ CFU·mL^-1, with 89.5% of 200 mg L^-1 acephate degradation observed within 32 h. According to the main products methamidophos, acetamide and acetic acid, a novel degradation pathway for acephate was proposed to include hydrolysis and oxidation as the main pathways of acephate degradation. Moreover, the bioaugmentation of acephate-contaminated soils with consortium ZQ01 significantly enhanced the removal rate of acephate. The results of the present work demonstrate the potential of microbial consortium ZQ01 to degrade acephate in water and soil environments, with a different and complementary acephate degradation pathway.