Rapid detection of multiple resistance genes to last-resort antibiotics in Enterobacteriaceae pathogens by recombinase polymerase amplification combined with lateral flow dipstick

Portable microfluidic devices for monitoring antibiotic resistance genes in wastewater

Antibiotic resistance genes (ARGs) pose serious threats to environmental and public health, and monitoring ARGs in wastewater is a growing need because wastewater is an important source. Microfluidic devices can integrate basic functional units involved in sample assays on a small chip, through the precise control and manipulation of micro/nanofluids in micro/nanoscale spaces, demonstrating the great potential of ARGs detection in wastewater. Here, we (1) summarize the state of the art in microfluidics for recognizing ARGs, (2) determine the strengths and weaknesses of portable microfluidic chips, and (3) assess the potential of portable microfluidic chips to detect ARGs in wastewater. Isothermal nucleic acid amplification and CRISPR/Cas are two commonly used identification elements for the microfluidic detection of ARGs. The former has better sensitivity due to amplification, but false positives due to inappropriate primer design and contamination; the latter has better specificity. The combination of the two can achieve complementarity to a certain extent. Compared with traditional microfluidic chips, low-cost and biocompatible paper-based microfluidics is a very attractive test for ARGs, whose fluid flow in paper does not require external force, but it is weaker in terms of repeatability and high-throughput detection. Due to that only a handful of portable microfluidics detect ARGs in wastewater, fabricating high-throughput microfluidic chips, developing and optimizing recognition techniques for the highly selective and sensitive identification and quantification of a wide range of ARGs in complex wastewater matrices are needed.

Application of recombinase polymerase amplification with lateral flow assay to pathogen point-of-care diagnosis

Since the outbreak of the new coronavirus, point-of-care diagnostics based on nucleic acid testing have become a requirement for the development of pathogen diagnostics, which require the ability to accurately, rapidly, and conveniently detect pathogens. Conventional nucleic acid amplification techniques no longer meet the requirements for pathogen detection in low-resource, low-skill environments because they require specialist equipment, complex operations, and long detection times. Therefore, recombinant polymerase amplification (RPA) is becoming an increasingly important method in today's nucleic acid detection technology because it can amplify nucleic acids in 20-30 minutes at a constant temperature, greatly reducing the dependence on specialist equipment and technicians. RPA products are primarily detected through methods such as real-time fluorescence, gel electrophoresis, lateral flow assays (LFAs), and other techniques. Among these, LFAs allow for the rapid detection of amplification products within minutes through the visualization of results, offering convenient operation and low cost. Therefore, the combination of RPA with LFA technology has significant advantages and holds broad application prospects in point-of-care (POC) diagnostics, particularly in low-resource settings. Here, we focus on the principles of RPA combined with LFAs, their application to pathogen diagnosis, their main advantages and limitations, and some improvements in the methods.

Validation of Recombinase Polymerase Amplification with In-House Lateral Flow Assay for mcr-1 Gene Detection of Colistin Resistant Escherichia coli Isolates

BACKGROUND/OBJECTIVES

The emergence of the mobilized colistin resistance 1 (mcr-1) gene, which causes colistin resistance, is a serious concern in animal husbandry, particularly in pigs. Although antibiotic regulations in many countries have prohibited the use of colistin in livestock, the persistence and dissemination of this plasmid-mediated gene require effective and rapid monitoring. Therefore, a rapid, sensitive, and specific method combining recombinase polymerase amplification (RPA) with an in-house lateral flow assay (LFA) for the mcr-1 gene detection was developed.

METHODS

The colistin agar test and broth microdilution were employed to screen 152 E. coli isolates from pig fecal samples of five antibiotic-used farms. The established RPA-in-house LFA was validated with PCR for mcr-1 gene detection.

RESULTS

The RPA-in-house LFA was completed within 35 min (20 min of amplification and 5-15 min on LFA detection) at 37 °C. The sensitivity, specificity, and accuracy were entirely 100% in concordance with PCR results. No cross-reactivity was detected with seven common pathogenic bacteria or other mcr gene variants.

CONCLUSIONS

Therefore, the in-house RPA-LFA serves as a point-of-care testing tool that is rapid, simple, and portable, facilitating effective surveillance of colistin resistance in both veterinary and clinical settings, thereby enhancing health outcomes.

Phenotypic and genotypic perspectives on detection methods for bacterial antimicrobial resistance in a One Health context: research progress and prospects

The widespread spread of bacterial antimicrobial resistance (AMR) and multidrug-resistant bacteria poses a significant threat to global public health. Traditional methods for detecting bacterial AMR are simple, reproducible, and intuitive, requiring long time incubation and high labor intensity. To quickly identify and detect bacterial AMR is urgent for clinical treatment to reduce mortality rate, and many new methods and technologies were required to be developed. This review summarizes the current phenotypic and genotypic detection methods for bacterial AMR. Phenotypic detection methods mainly include antimicrobial susceptibility tests, while genotypic detection methods have higher sensitivity and specificity and can detect known or even unknown drug resistance genes. However, most of the current tests are either genotypic or phenotypic and rarely combined. Combining the advantages of phenotypic and genotypic methods, combined with the joint application of multiple rapid detection methods may be the trend for future AMR testing. Driven by rapid diagnostic technology, big data analysis, and artificial intelligence, detection methods of bacterial AMR are expected to constantly develop and innovate. Adopting rational detection methods and scientific data analysis can better address the challenges of bacterial AMR and ensure human health and social well-being.

A multiplexed, allele-specific recombinase polymerase amplification assay with lateral flow readout for sickle cell disease detection

Isothermal nucleic acid amplification tests have the potential to improve disease diagnosis at the point of care, but it remains challenging to develop multiplexed tests that can detect ≥3 targets or to detect point mutations that may cause disease. These capabilities are critical to enabling informed clinical decision-making for many applications, such as sickle cell disease (SCD). To address this, we describe the development of a multiplexed allele-specific recombinase polymerase amplification (RPA) assay with lateral flow readout. We first characterize the specificity of RPA using primer design strategies employed in PCR to achieve point mutation detection, and demonstrate the utility of these strategies in achieving selective isothermal amplification and detection of genomic DNA encoding for the healthy βA globin allele, or genomic DNA containing point mutations encoding for pathologic βS and βC globin alleles, which are responsible for most sickle cell disorders. We then optimize reaction conditions to achieve multiplexed amplification and identification of the three alleles in a single reaction. Finally, we perform a small pilot study with 20 extracted genomic DNA samples from SCD patients and healthy volunteers - of the 13 samples with valid results, the assay demonstrated 100% sensitivity and 100% specificity for detecting pathologic alleles, and an overall accuracy of 92.3% for genotype prediction. This multiplexed assay is rapid, minimally instrumented, and when combined with point-of-care sample preparation, could enable DNA-based diagnosis of SCD in low-resource settings. The strategies reported here could be applied to other challenges, such as detection of mutations that confer drug resistance.

Genomic landscape of NDM-1 producing multidrug-resistant Providencia stuartii causing burn wound infections in Bangladesh

The increasing antimicrobial resistance in Providencia stuartii (P. stuartii) worldwide, particularly concerning for immunocompromised and burn patients, has raised concern in Bangladesh, where the significance of this infectious opportunistic pathogen had been previously overlooked, prompting a need for investigation. The two strains of P. stuartii (P. stuartii SHNIBPS63 and P. stuartii SHNIBPS71) isolated from wound swab of two critically injured burn patients were found to be multidrug-resistant and P. stuartii SHNIBPS63 showed resistance to all the 22 antibiotics tested as well as revealed the co-existence of blaVEB-6 (Class A), blaNDM-1 (Class B), blaOXA-10 (Class D) beta lactamase genes. Complete resistance to carbapenems through the production of NDM-1, is indicative of an alarming situation as carbapenems are considered to be the last line antibiotic to combat this pathogen. Both isolates displayed strong biofilm-forming abilities and exhibited resistance to copper, zinc, and iron, in addition to carrying multiple genes associated with metal resistance and the formation of biofilms. The study also encompassed a pangenome analysis utilizing a dataset of eighty-six publicly available P. stuartii genomes (n = 86), revealing evidence of an open or expanding pangenome for P. stuartii. Also, an extensive genome-wide analysis of all the P. stuartii genomes revealed a concerning global prevalence of diverse antimicrobial resistance genes, with a particular alarm raised over the abundance of carbapenem resistance gene blaNDM-1. Additionally, this study highlighted the notable genetic diversity within P. stuartii, significant informations about phylogenomic relationships and ancestry, as well as potential for cross-species transmission, raising important implications for public health and microbial adaptation across different environments.

Antimicrobial resistance and biotechnological potential of plastic-associated bacteria isolated from an urban estuary

Plastics have quickly become one of the major pollutants in aquatic environments worldwide and solving the plastic pollution crisis is considered a central goal of modern society. In this study, 10 different plastic samples, including high- and low-density polyethylene and polypropylene, were collected from a deeply polluted urban estuary in Brazil. By employing different isolation and analysis approaches to investigate plastic-associated bacteria, a predominance of potentially pathogenic bacteria such as Acinetobacter, Aeromonas, and Vibrio was observed throughout all plastic samples. Bacteria typically found in the aquatic environment harboured clinically relevant genes encoding resistance to carbapenems (blaKPC ) and colistin (such as mcr-3 and mcr-4), along with genetic determinants associated with potentially active gene mobilization. Whole genome sequencing and annotation of three plastic-associated Vibrio strains further demonstrated the carriage of mobile genetic elements and antimicrobial resistance and virulence genes. On the other hand, bacteria isolated from the same samples were also able to produce esterases, lipases, and bioemulsifiers, thus highlighting that the plastisphere could also be of special interest from a biotechnological perspective.

Multiplexed CRISPR-Based Nucleic Acid Detection Using a Single Cas Protein

Thanks to its ease, speed, and sensitivity, CRISPR-based nucleic acid detection has been increasingly explored for molecular diagnostics. However, one of its major limitations is lack of multiplexing capability because the detection relies on the trans-cleavage activity of the Cas protein, which necessitates the use of multiple orthogonal Cas proteins for multiplex detection. Here we report the development of a multiplexed CRISPR-based nucleic acid detection system with single-nucleotide resolution using a single Cas protein (Cas12a). This method, termed as CRISPR-TMSD, integrates the toehold-mediated strand displacement (TMSD) reaction, and the cis-cleavage activity of the Cas protein and multiplexed detection are achieved using a single Cas protein owing to the use of target-specific reporters. A set of computational simulation toolkits was used to design the TMSD reporter, allowing for highly sensitive and specific identification of target sequences. In combination with the recombinase polymerase amplification (RPA), the detection limit can reach as low as 1 copy/μL. As proof of concept, CRISPR-TMSD was subsequently used to detect an oncogenic gene and SARS-CoV-2 RNA with a single-nucleotide resolution. This work represents a conceptually new strategy for designing a CRISPR-based diagnostic system and has great potential to expand the application of CRISPR-based diagnostics.