Transcriptomic Effects of the Cell Cycle Regulator LGO in Arabidopsis Sepals

Robust organ size in Arabidopsis is primarily governed by cell growth rather than cell division patterns

Organ sizes and shapes are highly reproducible, or robust, within a species and individuals. Arabidopsis thaliana sepals, which are the leaf-like organs that enclose flower buds, have consistent size and shape, indicating robust development. Cell growth is locally heterogeneous due to intrinsic and extrinsic noise. To achieve robust organ shape, fluctuations in cell growth must average to an even growth rate, which requires that fluctuations are uncorrelated or anti-correlated in time and space. Here, we live image and quantify the development of sepals with an increased or decreased number of cell divisions (lgo mutant and LGO overexpression, respectively), a mutant with altered cell growth variability (ftsh4), and double mutants combining these. Changes in the number of cell divisions do not change the overall growth pattern. By contrast, in ftsh4 mutants, cell growth accumulates in patches of over- and undergrowth owing to correlations that impair averaging, resulting in increased organ shape variability. Thus, we demonstrate in vivo that the number of cell divisions does not affect averaging of cell growth, preserving robust organ morphogenesis, whereas correlated growth fluctuations impair averaging.

ATML1 Regulates the Differentiation of ER Body-Containing Large Pavement Cells in Rosette Leaves of Brassicaceae Plants

Endoplasmic reticulum (ER)-derived organelles, ER bodies, participate in the defense against herbivores in Brassicaceae plants. ER bodies accumulate β-glucosidases, which hydrolyze specialized thioglucosides known as glucosinolates to generate bioactive substances. In Arabidopsis thaliana, the leaf ER (LER) bodies are formed in large pavement cells, which are found in the petioles, margins and blades of rosette leaves. However, the regulatory mechanisms involved in establishing large pavement cells are unknown. Here, we show that the ARABIDOPSIS THALIANA MERISTEM L1 LAYER (ATML1) transcription factor regulates the formation of LER bodies in large pavement cells of rosette leaves. Overexpression of ATML1 enhanced the expression of LER body-related genes and the number of LER body-containing large pavement cells, whereas its knock-out resulted in opposite effects. ATML1 enhances endoreduplication and cell size through LOSS OF GIANT CELLS FROM ORGANS (LGO). Although the overexpression and knock-out of LGO affected the appearance of large pavement cells in Arabidopsis, the effect on LER body-related gene expression and LER body formation was weak. LER body-containing large pavement cells were also found in Eutrema salsugineum, another Brassicaceae species. Our results demonstrate that ATML1 establishes large pavement cells to induce LER body formation in Brassicaceae plants and thereby possibly contribute to the defense against herbivores.

Sepal shape variability is robust to cell size heterogeneity in Arabidopsis

How organisms produce organs with robust shapes and sizes is still an open question. In recent years, the Arabidopsis sepal has been used as a model system to study this question because of its highly reproducible shape and size. One interesting aspect of the sepal is that its epidermis contains cells of very different sizes. Previous reports have qualitatively shown that sepals with more or less giant cells exhibit comparable final size and shape. Here, we investigate this question using quantitative approaches. We find that a mixed population of cell size modestly contribute to the normal width of the sepal but is not essential for its shape robustness. Furthermore, in a mutant with increased cell and organ growth variability, the change in final sepal shape caused by giant cells is exaggerated but the shape robustness is not affected. This formally demonstrates that sepal shape variability is robust to cell size heterogeneity.

Dormant cancer cells and polyploid giant cancer cells: The roots of cancer recurrence and metastasis

Tumour cell dormancy is critical for metastasis and resistance to chemoradiotherapy. Polyploid giant cancer cells (PGCCs) with giant or multiple nuclei and high DNA content have the properties of cancer stem cell and single PGCCs can individually generate tumours in immunodeficient mice. PGCCs represent a dormant form of cancer cells that survive harsh tumour conditions and contribute to tumour recurrence. Hypoxic mimics, chemotherapeutics, radiation and cytotoxic traditional Chinese medicines can induce PGCCs formation through endoreduplication and/or cell fusion. After incubation, dormant PGCCs can recover from the treatment and produce daughter cells with strong proliferative, migratory and invasive abilities via asymmetric cell division. Additionally, PGCCs can resist hypoxia or chemical stress and have a distinct protein signature that involves chromatin remodelling and cell cycle regulation. Dormant PGCCs form the cellular basis for therapeutic resistance, metastatic cascade and disease recurrence. This review summarises regulatory mechanisms governing dormant cancer cells entry and exit of dormancy, which may be used by PGCCs, and potential therapeutic strategies for targeting PGCCs.

Enhancer activation via TCP and HD-ZIP and repression by Dof transcription factors mediate giant cell-specific expression

Proper cell-type identity relies on highly coordinated regulation of gene expression. Regulatory elements such as enhancers can produce cell type-specific expression patterns, but the mechanisms underlying specificity are not well understood. We previously identified an enhancer region capable of driving specific expression in giant cells, which are large, highly endoreduplicated cells in the Arabidopsis thaliana sepal epidermis. In this study, we use the giant cell enhancer as a model to understand the regulatory logic that promotes cell type-specific expression. Our dissection of the enhancer revealed that giant cell specificity is mediated primarily through the combination of two activators and one repressor. HD-ZIP and TCP transcription factors are involved in the activation of expression throughout the epidermis. High expression of HD-ZIP transcription factor genes in giant cells promoted higher expression driven by the enhancer in giant cells. Dof transcription factors repressed the activity of the enhancer such that only giant cells maintained enhancer activity. Thus, our data are consistent with a conceptual model whereby cell type-specific expression emerges from the combined activities of three transcription factor families activating and repressing expression in epidermal cells.

Cell type-specific dynamics underlie cellular growth variability in plants

Coordination of growth, patterning and differentiation is required for shaping organs in multicellular organisms. In plants, cell growth is controlled by positional information, yet the behavior of individual cells is often highly heterogeneous. The origin of this variability is still unclear. Using time-lapse imaging, we determined the source and relevance of cellular growth variability in developing organs of Arabidopsis thaliana. We show that growth is more heterogeneous in the leaf blade than in the midrib and petiole, correlating with higher local differences in growth rates between neighboring cells in the blade. This local growth variability coincides with developing stomata. Stomatal lineages follow a specific, time-dependent growth program that is different from that of their surroundings. Quantification of cellular dynamics in the leaves of a mutant lacking stomata, as well as analysis of floral organs, supports the idea that growth variability is mainly driven by stomata differentiation. Thus, the cell-autonomous behavior of specialized cells is the main source of local growth variability in otherwise homogeneously growing tissue. Those growth differences are buffered by the immediate neighbors of stomata and trichomes to achieve robust organ shapes.

Deceleration of the cell cycle underpins a switch from proliferative to terminal divisions in plant stomatal lineage

Differentiation of specialized cell types requires precise cell-cycle control. Plant stomata are generated through asymmetric divisions of a stem-cell-like precursor followed by a single symmetric division that creates paired guard cells surrounding a pore. The stomatal-lineage-specific transcription factor MUTE terminates the asymmetric divisions and commits to differentiation. However, the role of cell-cycle machineries in this transition remains unknown. We discover that the symmetric division is slower than the asymmetric division in Arabidopsis. We identify a plant-specific cyclin-dependent kinase inhibitor, SIAMESE-RELATED4 (SMR4), as a MUTE-induced molecular brake that decelerates the cell cycle. SMR4 physically and functionally associates with CYCD3;1 and extends the G1 phase of asymmetric divisions. By contrast, SMR4 fails to interact with CYCD5;1, a MUTE-induced G1 cyclin, and permits the symmetric division. Our work unravels a molecular framework of the proliferation-to-differentiation switch within the stomatal lineage and suggests that a timely proliferative cell cycle is critical for stomatal-lineage identity.

•

During stomatal differentiation, asymmetric divisions are faster than terminal divisions

•

Upon commitment to differentiation, MUTE induces the cell-cycle inhibitor SMR4

•

SMR4 decelerates the asymmetric cell division cycle via selective binding to cyclin D

•

Regulating duration of the G1 phase is critical for epidermal cell fate specification

Arabidopsis sepals: A model system for the emergent process of morphogenesis

During development, Arabidopsis thaliana sepal primordium cells grow, divide and interact with their neighbours, giving rise to a sepal with the correct size, shape and form. Arabidopsis sepals have proven to be a good system for elucidating the emergent processes driving morphogenesis due to their simplicity, their accessibility for imaging and manipulation, and their reproducible development. Sepals undergo a basipetal gradient of growth, with cessation of cell division, slow growth and maturation starting at the tip of the sepal and progressing to the base. In this review, I discuss five recent examples of processes during sepal morphogenesis that yield emergent properties: robust size, tapered tip shape, laminar shape, scattered giant cells and complex gene expression patterns. In each case, experiments examining the dynamics of sepal development led to the hypotheses of local rules. In each example, a computational model was used to demonstrate that these local rules are sufficient to give rise to the emergent properties of morphogenesis.

Endoreplication as a potential driver of cell wall modifications

Endoreplication represents a variant of the mitotic cell cycle during which cells replicate their DNA without mitosis and/or cytokinesis, resulting in an increase in the cells' ploidy level. This process is especially prominent in higher plants, where it has been correlated with cell differentiation, metabolic output and rapid cell growth. However, different reports argue against a ploidy-dependent contribution to cell growth. Here, we review accumulating data suggesting that endocycle onset might exert an effect on cell growth through transcriptional control of cell wall-modifying genes to drive cell wall changes required to accommodate turgor-driven rapid cell expansion, consistent with the idea that vacuolar expansion rather than a ploidy-driven increase in cellular volume represents the major force driving cell growth.

Growth and biomechanics of shoot organs

Plant organs arise through complex interactions between biological and physical factors that control morphogenesis. While there has been tremendous progress in the understanding of the genetics behind development, we know much less about how mechanical forces control growth in plants. In recent years, new multidisciplinary research combining genetics, live-imaging, physics, and computational modeling has begun to fill this gap by revealing the crucial role of biomechanics in the establishment of plant organs. In this review, we provide an overview of our current understanding of growth during initiation, patterning, and expansion of shoot lateral organs. We discuss how growth is controlled by physical forces, and how mechanical stresses generated during growth can control morphogenesis at the level of both cells and tissues. Understanding the mechanical basis of growth and morphogenesis in plants is in its early days, and many puzzling facts are yet to be deciphered.

Cellular basis of growth in plants: geometry matters

The growth of individual cells underlies the development of biological forms. In plants, cells are interconnected by rigid walls, fixing their position with respect to one another and generating mechanical feedbacks between cells. Current research is shedding new light on how plant growth is controlled by physical inputs at the level of individual cells and growing tissues. In this review, we discuss recent progress in our understanding of the cellular basis of growth from a biomechanical perspective. We describe the role of the cell wall and turgor pressure in growth and highlight the often-overlooked role of cell geometry in this process. It is becoming apparent that a combination of experimental and theoretical approaches is required to answer new emerging questions in the biomechanics of plant morphogenesis. We summarise how this multidisciplinary approach brings us closer to a unified understanding of the generation of biological forms in plants.

Ploidy and Size at Multiple Scales in the Arabidopsis Sepal

Ploidy and size phenomena are observed to be correlated across several biological scales, from subcellular to organismal. Two kinds of ploidy change can affect plants. Whole-genome multiplication increases ploidy in whole plants and is broadly associated with increases in cell and organism size. Endoreduplication increases ploidy in individual cells. Ploidy increase is strongly correlated with increased cell size and nuclear volume. Here, we investigate scaling relationships between ploidy and size by simultaneously quantifying nuclear size, cell size, and organ size in sepals from an isogenic series of diploid, tetraploid, and octoploid Arabidopsis thaliana plants, each of which contains an internal endopolyploidy series. We find that pavement cell size and transcriptome size increase linearly with whole-organism ploidy, but organ area increases more modestly due to a compensatory decrease in cell number. We observe that cell size and nuclear size are maintained at a constant ratio; the value of this constant is similar in diploid and tetraploid plants and slightly lower in octoploid plants. However, cell size is maintained in a mutant with reduced nuclear size, indicating that cell size is scaled to cell ploidy rather than to nuclear size. These results shed light on how size is regulated in plants and how cells and organisms of differing sizes are generated by ploidy change.

Functional Analysis of Short Linear Motifs in the Plant Cyclin-Dependent Kinase Inhibitor SIAMESE

Endoreplication, a modified cell cycle in which DNA is replicated without subsequent cell division, plays an important but poorly understood role in plant growth and in plant responses to biotic and abiotic stress. The Arabidopsis (Arabidopsis thaliana) SIAMESE (SIM) gene encodes the first identified member of the SIAMESE-RELATED (SMR) family of cyclin-dependent kinase inhibitors. SIM controls endoreplication during trichome development, and sim mutant trichomes divide several times instead of endoreplicating their DNA. The SMR family is defined by several short linear amino acid sequence motifs of largely unknown function, and family members have little sequence similarity to any known protein functional domains. Here, we investigated the roles of the conserved motifs in SIM site-directed Arabidopsis mutants using several functional assays. We identified a potential cyclin-dependent kinase (CDK)-binding site, which bears no resemblance to other known CDK interaction motifs. We also identified a potential site of phosphorylation and two redundant nuclear localization sequences. Surprisingly, the only motif with similarity to the other family of plant CDK inhibitors, the INHIBITOR/INTERACTOR OF CDC2 KINASE/KIP-RELATED PROTEIN proteins, is not required for SIM function in vivo. Because even highly divergent members of the SMR family are able to replace SIM function in Arabidopsis trichomes, it is likely that the results obtained here for SIM will apply to other members of this plant-specific family of CDK inhibitors.

Downregulating aspen xylan biosynthetic GT43 genes in developing wood stimulates growth via reprograming of the transcriptome

Xylan is one of the main compounds determining wood properties in hardwood species. The xylan backbone is thought to be synthesized by a synthase complex comprising two members of the GT43 family. We downregulated all GT43 genes in hybrid aspen (Populus tremula × tremuloides) to understand their involvement in xylan biosynthesis. All three clades of the GT43 family were targeted for downregulation using RNA interference individually or in different combinations, either constitutively or specifically in developing wood. Simultaneous downregulation in developing wood of the B (IRX9) and C (IRX14) clades resulted in reduced xylan Xyl content relative to reducing end sequence, supporting their role in xylan backbone biosynthesis. This was accompanied by a higher lignocellulose saccharification efficiency. Unexpectedly, GT43 suppression in developing wood led to an overall growth stimulation, xylem cell wall thinning and a shift in cellulose orientation. Transcriptome profiling of these transgenic lines indicated that cell cycling was stimulated and secondary wall biosynthesis was repressed. We suggest that the reduced xylan elongation is sensed by the cell wall integrity surveying mechanism in developing wood. Our results show that wood-specific suppression of xylan-biosynthetic GT43 genes activates signaling responses, leading to increased growth and improved lignocellulose saccharification.

Why do plants need so many cyclin-dependent kinase inhibitors?

Cell cycle regulation is fundamental to growth and development, and Cyclin-Dependent Kinase Inhibitors (CKIs) are major negative regulators of the cell cycle. Plant genomes encode substantially more CKIs than metazoan or fungal genomes. Plant CKIs fall into 2 distinct families, KIP-RELATED PROTEINS (KRPs) and SIAMESE-RELATED proteins (SMRs). SMRs can inhibit both S-phase and M-phase CDK complexes in vitro and are transcribed throughout the cell cycle, yet SMRs do not inhibit DNA replication in vivo. This suggests that SMRs must be activated post transcriptionally after the start of S-phase, but the mechanism of this hypothesized activation is unknown. Recent work indicates that even distantly related SMRs have the same biochemical function, and that differential transcriptional regulation likely maintains their distinct roles in integrating various environmental and developmental signals with the cell cycle.