Kinematical, Structural and Mechanical Adaptations to Desiccation in Poikilohydric Ramonda myconi (Gesneriaceae)

Functional PDMS Elastomers: Bulk Composites, Surface Engineering, and Precision Fabrication

Polydimethylsiloxane (PDMS)-the simplest and most common silicone compound-exemplifies the central characteristics of its class and has attracted tremendous research attention. The development of PDMS-based materials is a vivid reflection of the modern industry. In recent years, PDMS has stood out as the material of choice for various emerging technologies. The rapid improvement in bulk modification strategies and multifunctional surfaces has enabled a whole new generation of PDMS-based materials and devices, facilitating, and even transforming enormous applications, including flexible electronics, superwetting surfaces, soft actuators, wearable and implantable sensors, biomedicals, and autonomous robotics. This paper reviews the latest advances in the field of PDMS-based functional materials, with a focus on the added functionality and their use as programmable materials for smart devices. Recent breakthroughs regarding instant crosslinking and additive manufacturing are featured, and exciting opportunities for future research are highlighted. This review provides a quick entrance to this rapidly evolving field and will help guide the rational design of next-generation soft materials and devices.

Demystifying the convergent ecological specialization of desiccation-tolerant vascular plants for water deficit

BACKGROUND AND AIMS

Desiccation-tolerant vascular plants (DT plants) are able to tolerate the desiccation of their vegetative tissues; as a result, two untested paradigms can be found in the literature, despite contradictions to theoretical premises and empirical findings. First, it is widely accepted that DT plants form a convergent group of specialist plants to water deficit conditions. A derived paradigm is that DT plants are placed at the extreme end of stress tolerance. Here, we tested the hypotheses that DT plants (1) are in fact convergent specialists for water deficit conditions and (2) exhibit ecological strategies related to stress tolerance, conservative resource-use and survival.

METHODS

We used biogeographical and functional-traits approaches to address the mentioned paradigms and assess the species' ecological strategies. For this, 27 DT plants were used and compared to 27 phylogenetically related desiccation-sensitive vascular plants (DS plants).

KEY RESULTS

We could not confirm either of the two hypotheses. We found that despite converging in desiccation tolerance, DT plants differ in relation to the conditions in which they occur and the ecological strategies they use to deal with water deficit. We found that some DT plants exhibit advantageous responses for higher growth and resource acquisition, which are suitable responses to cope with more productive conditions or with higher disturbance. We discuss that the ability to tolerate desiccation could compensate for a drought vulnerability promoted by higher investment in growth and bring advantages to deal with quick and pronounced variation of water, rather than to drought solely.

CONCLUSIONS

DT plants are not only selected by drought as an environmental constraint. The alternative functional designs could promote the diversity of ecological strategies, which preclude their convergence to the same resources and conditions. Thus, DT plants are a heterogeneous group of plants in how they deal with drought, despite their desiccation tolerance ability.

Gesneriads, a Source of Resurrection and Double-Tolerant Species: Proposal of New Desiccation- and Freezing-Tolerant Plants and Their Physiological Adaptations

Gesneriaceae is a pantropical family of plants that, thanks to their lithophytic and epiphytic growth forms, have developed different strategies for overcoming water scarcity. Desiccation tolerance or "resurrection" ability is one of them: a rare phenomenon among angiosperms that involves surviving with very little relative water content in their tissues until water is again available. Physiological responses of desiccation tolerance are also activated during freezing temperatures, a stress that many of the resurrection gesneriads suffer due to their mountainous habitat. Therefore, research on desiccation- and freezing-tolerant gesneriads is a great opportunity for crop improvement, and some of them have become reference resurrection angiosperms (Dorcoceras hygrometrica, Haberlea rhodopensis and Ramonda myconi). However, their difficult indoor cultivation and outdoor accessibility are major obstacles for their study. Therefore, this review aims to identify phylogenetic, geoclimatic, habitat, and morphological features in order to propose new tentative resurrection gesneriads as a way of making them more reachable to the scientific community. Additionally, shared and species-specific physiological responses to desiccation and freezing stress have been gathered as a stress response metabolic basis of the family.

Allelopathic potential and allelochemical composition in different soil layers of Rhododendron delavayi forest, southwest China

Forests habituated by Rhododendron delavayi often lack understory vegetation, which could possibly be a consequence of allelopathy. It is a phenomenon by virtue of which certain plant species produce allelochemicals that affect the growth and behavior of surrounding plants. To elucidate the allelopathic potential and allelochemicals present in the different layers of a R. delavayi forest, extracts obtained from three layers of the forest were used for seed germination bioassays and gas chromatography-mass spectrometry (GC–MS) analysis. Aqueous extracts of the litter and humus layers significantly inhibited the seed germination of R. delavayi, Festuca arundinacea, and Lolium perenne, with the litter layer causing the strongest inhibitory effect. A total of 26 allelochemicals were identified in the litter, humus, and soil layers by GC–MS analysis. The primary allelochemicals in the soil and humus layer were organic acids, while the main allelochemicals in the litter layer were phenolic acids. The redundancy analysis revealed the significance of total nitrogen (TN) and relative water content (RWC) in explaining the distribution of the allelochemicals. The results indicated that the litter layer exerted the maximum allelopathic effect due to presence of maximum amount of allelochemical especially the phenolic acids.

From Understanding Mechanical Behavior to Curvature Prediction of Humidity-Triggered Bilayer Actuators

Nature will always be an endless source of bioinspiration for man-made smart materials and multifunctional devices. Impressively, even cutoff leaves from resurrection plants can autonomously and reproducibly change their shape upon humidity changes, which goes along with total recovery of their mechanical properties after being completely dried. In this work, simple bilayers are presented as autonomously moving, humidity-triggered bending actuators. The bilayers-showing reproducible bending behavior with reversible kinematics and multiway behavior-are studied in terms of their mechanical behavior upon humidity changes. The active layer consists of a highly conducting polymer film based on poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) with poly(dimethylsiloxane) (PDMS) as passive layer. The response to humidity is explored with dynamic mechanical thermal analysis and quartz crystal microbalance measurements. Introduction of a composite beam model allows to predict the curvature of the actuators with input from the rheological measurements. It is clearly demonstrated that volumetric strain and Young's modulus, both heavily influenced by the water uptake, dominate the bending behavior and therefore the curvature of the actuators. This loop of rheological characterization coupled with an analytical model allows to predict curvatures of in principle any complex geometry and material combination for moving parts in soft robotics.

Self-Repair in Cacti Branches: Comparative Analyses of Their Morphology, Anatomy, and Biomechanics

Damage-repair is particularly important for the maintenance of the water-storing abilities of succulent plants such as cacti. Comparative morphological, anatomical, and biomechanical analyses of self-repair were performed on artificially wounded branches of Opuntiaficus-indica and Cylindropuntia bigelovii. Macroscopic observations, contrast staining, and lignin-proof staining were used to investigate morphological and anatomical responses after wounding at various time intervals. Two-point bending tests were repeatedly performed on the same branches under unwounded, freshly wounded, and healed conditions by using customized 3D-printed clamping jaws. Morphologically, both species showed a rolling-in of the wound edges, but no mucilage discharge. Anatomically, ligno-suberized peridermal layers developed that covered the wound region, and new parenchyma cells formed, especially in O. ficus-indica. In all samples, the wounding effect directly after damage caused a decrease between 18% and 37% in all the tested mechanical parameters, whereas a positive healing effect after 21 days was only found for C. bigelovii. Based on our data, we hypothesize a high selection pressure on the restoration of structural integrity in the wound area, with a focus on the development of efficient water-retaining mechanisms, whereas the concept of “sufficient is good enough” seems to apply for the restoration of the mechanical properties.

Born to revive: molecular and physiological mechanisms of double tolerance in a paleotropical and resurrection plant

Resurrection plants recover physiological functions after complete desiccation. Almost all of them are native to tropical warm environments. However, the Gesneriaceae include four genera, remnant of the past palaeotropical flora, which inhabit temperate mountains. One of these species is additionally freezing-tolerant: Ramonda myconi. We hypothesise that this species has been able to persist in a colder climate thanks to some resurrection-linked traits. To disentangle the physiological mechanisms underpinning multistress tolerance to desiccation and freezing, we conducted an exhaustive seasonal assessment of photosynthesis (gas exchange, limitations to partitioning, photochemistry and galactolipids) and primary metabolism (through metabolomics) in two natural populations at different elevations. R. myconi displayed low rates of photosynthesis, largely due to mesophyll limitation. However, plants were photosynthetically active throughout the year, excluding a reversible desiccation period. Common responses to desiccation and low temperature involved chloroplast protection: enhanced thermal energy dissipation, higher carotenoid to Chl ratio and de-epoxidation of the xanthophyll cycle. As specific responses, antioxidants and secondary metabolic routes rose upon desiccation, while putrescine, proline and a variety of sugars rose in winter. The data suggest conserved mechanisms to cope with photo-oxidation during desiccation and cold events, while additional metabolic mechanisms may have evolved as specific adaptations to cold during recent glaciations.

Drooping of Gerbera flower heads: mechanical and structural studies of a well-known phenomenon

Gerbera, one of the most loved cut flowers, is (in)famous for the drooping of its flower heads under dehydration. This effect has been quantified by analysing both fully turgescent and wilting peduncles of Gerbera jamesonii 'Nuance'. Wilting peduncles display pronounced bending in the region directly below the inflorescence after 24 h of dehydration, while the rest of the peduncle remains upright. Using anatomical measurements and three-point bending tests, we have analysed whether this phenomenon is caused by mechanical and/or geometrical alterations. We have found that both the flexural rigidity and the axial second moment of area are significantly decreased in the apical part of wilting peduncles, whereas the bending elastic modulus shows no significant change. Moreover, cross-sections of wilting peduncles ovalize significantly more than those of turgescent peduncles and exhibit considerable shrinkage of the parenchyma, taking up the majority of the cross-sectional area. Generally, the drooping of wilting Gerbera flowers can be regarded as a temporary instability of a rod-shaped cellular solid caused by anatomical differences (tissue arrangement, existence or the absence of a pith cavity) and geometrical changes (the decrease of axial second moment of area, cross-sectional ovalization, shrinkage of tissues) between the apical and basal regions of their peduncles.