Delivery of Inoculum of Rhizophagus irregularis via Seed Coating in Combination with Pseudomonas libanensis for Cowpea Production

Physiological and transcriptomic analysis reveals the coating of microcapsules embedded with bacteria can enhance wheat salt tolerance

Salt stress is one of the most important abiotic stress factors limiting crop production. Therefore, improving the stress resistance of seeds is very important for crop growth. Our previous studies have shown that using microcapsules encapsulating bacteria (Pontibacter actiniarum DSM 19842) as seed coating for wheat can alleviate salt stress. In this study, the genes and pathways involved in the response of wheat to salt stress were researched further. The results showed that compared with the control, the coating can improve osmotic stress and decrease oxidative damage by increasing the content of proline (29.1%), the activity of superoxide dismutase (SOD) (94.2%), peroxidase (POD) (45.7%) and catalase (CAT) (3.3%), reducing the content of hydrogen peroxide (H2O2) (39.8%) and malondialdehyde (MDA) (45.9%). In addition, ribonucleic acid (RNA) sequencing data showed that 7628 differentially expressed genes (DEGs) were identified, and 4426 DEGs up-regulated, 3202 down-regulated in the coated treatment. Many DEGs related to antioxidant enzymes were up-regulated, indicating that coating can promote the expression of antioxidant enzyme-related genes and alleviate oxidative damage under salt stress. The differential gene expression analysis demonstrated up-regulation of 27 genes and down-regulation of 20 genes. Transcription factor families, mostly belonging to bHLH, MYB, B3, NAC, and WRKY. Overall, this seed coating can promote the development of sustainable agriculture in saline soil.

Application of antifungal metabolites from Streptomyces philanthi RL-1-178 for maize grain coating formulations and their efficacy as biofungicide during storage

The major safety risk of maize grain is contamination with mycotoxins. In this study, a maize-coating formulation containing freeze-dried culture filtrate of Streptomyces philanthi RL-1-178 (DCF RL-1-178) was developed and evaluated to prevent the growth of mycotoxins during maize grain storage. In vitro studies using confrontation tests on PDA plates indicated that S. philanthi RL-1-178 inhibited the growth of Aspergillus parasiticus TISTR 3276 (89.0%) and A. flavus PSRDC-4 (95.0%). The maize grain coating formulations containing the DCF RL-1-178 (0, 5, 10, and 15% (v/v)) and the polymer polyvinylpyrrolidone (PVP-K90, 4.0% (w/v)) were tested for their efficacy in In vitro and during 5 months storage. In In vitro assay, maize coating formular containing the optimum concentration (15.0%, v/v) of the DCF RL-1-178 exhibited 54.80% and 54.17% inhibition on the growth of A. parasiticus TISTR 3276 and A. flavus PSRDC-4 respectively. The inhibition was also illustrated by the microstructures of interactions between the coated maize grains with or without the DCF RL-1-178 and the fungal pathogens observed under microscope and SEM. Incorporating the DCF RL-1-178 or fungicidal Metalaxyl® into the polymer PVP-K90 maize grains coating resulted in the complete inhibition of the production of aflatoxin B₁ (analysed by HPLC) by the two aflatoxigenic pathogens after 5 months storage at room temperature. However, the shelf-life was shortened to only 3 months during storage at room temperature with 90% relative humidity. Overall, the application of the 10-15% DCF RL-1-178 into the maize grain coating formular provides a new alternative measure to control the mycotoxins during storage for at least 5 months. The In vitro cell cytotoxicity study showed that a concentration of 15% (v/v) or 1000 μg/mL of the DCF RL-1-178 had a strong cytotoxic effect on Vero cells. These findings indicate that DCF RL-1-178 is a potential biofungicide for controlling mycotoxins contamination in maize seed storage for planting, but not maize grain storage for animal feed.

Fungal Endophytes Enhance Wheat and Tomato Drought Tolerance in Terms of Plant Growth and Biochemical Parameters

Drought is a major threat to plant growth in many parts of the world. During periods of drought, multiple aspects of plant physiology are negatively affected. For instance, water shortages induce osmotic imbalance, inhibit photosynthesis, decrease nutrient uptake, and increases the production of reactive oxygen species (ROS). In this context, it is necessary to develop sustainable strategies for crops that would help mitigate these conditions. In previous studies, endophytic Zopfiella erostrata strains were found to extensively colonize plant roots, forming a profuse melanized mycelium in the rhizosphere, which could be involved in improving water uptake and nutrient mineralization in plants. The aim of this study is to evaluate the effect of different strains of Z. erostrata on stress mitigation in wheat and tomato plants grown under water deficit conditions. General plant growth variables, as well as physiological and biochemical parameters, related to oxidative status were determined. Our data demonstrate that inoculation with both Zopfiella strains had a very significant effect on plant growth, even under water deficit conditions. However, we observed an even more pronounced impact, depending on the plant and strain involved, suggesting a certain degree of plant/strain compatibility. The biochemical aspects, the accumulation of proline, the oxidative damage to lipids, and the activity of antioxidant enzymes varied considerably depending on the endophyte and the plant evaluated.

Microbial seed coating: An attractive tool for sustainable agriculture

Seed coating is considered one of the best methods to promote sustainable agriculture where the physical and physiological properties of seeds can be improved to facilitate planting, increase growth indices and alleviate abiotic and biotic stresses. Several methods of seed coating are used to attain good application uniformity and adherence in the seed coating process. Seed coating has been tested in seeds of various plant species with different dimensions, forms, textures, and germination types. Plant beneficial microorganisms (PBM), such as rhizobia, bacteria, and fungi inoculated via seed inoculation can increase seed germination, plant performance and tolerance across biotic (e.g., pathogens and pests) and abiotic stress (e.g., salt, drought, and heavy metals) while reducing the use of agrochemical inputs. In this review, the microbial seed coating process and their ability to increase seed performance and protect plants from biotic and abiotic stresses are well discussed and highlighted in sustainable agricultural systems.

Characterizing Effects of Microbial Biostimulants and Whole-Soil Inoculums for Native Plant Revegetation

Soil microbes play important roles in plant health and ecosystem functioning, however, they can often be disturbed or depleted in degraded lands. During seed-based revegetation of such sites there is often very low germination and seedling establishment success, with recruitment of beneficial microbes to the rhizosphere one potential contributor to this problem. Here we investigated whether Australian native plant species may benefit from planting seed encapsulated within extruded seed pellets amended with one of two microbe-rich products: a commercial vermicast extract biostimulant or a whole-soil inoculum from a healthy reference site of native vegetation. Two manipulative glasshouse trials assessing the performance of two Australian native plant species (Acacia parramattensis and Indigofera australis) were carried out in both unmodified field-collected soil (trial 1) and in the same soil reduced in nutrients and microbes (trial 2). Seedling emergence and growth were compared between pelleted and bare-seeded controls and analyzed alongside soil nutrient concentrations and culturable microbial community assessments. The addition of microbial amendments maintained, but did not improve upon, high levels of emergence in both plant species relative to unamended pellets. In trial 1, mean time to emergence of Acacia parramattensis seedlings was slightly shorter in both amended pellet types relative to the standard pellets, and in trial 2, whole-soil inoculum pellets showed significantly improved growth metrics. This work shows that there is potential for microbial amendments to positively affect native plant emergence and growth, however exact effects are dependent on the type of amendment, the plant species, and the characteristics of the planting site soil.

Dual Inoculation of Plant Growth-Promoting Bacillus endophyticus and Funneliformis mosseae Improves Plant Growth and Soil Properties in Ginger

Co-inoculation with beneficial microbes has been suggested as a useful practice for the enhancement of plant growth, nutrient uptake, and soil nutrients. For the first time in Uzbekistan the role of plant-growth-promoting Bacillus endophyticus IGPEB 33 and arbuscular mycorrhizal fungi (AMF) on plant growth, the physiological properties of ginger (Zingiber officinale), and soil enzymatic activities was studied. Moreover, the coinoculation of B. endophyticus IGPEB 33 and AMF treatment significantly increased the plant height by 81%, leaf number by 70%, leaf length by 82%, and leaf width by 40% compared to the control. B. endophyticus IGPEB 33 individually increased plant height significantly by 51%, leaf number by 56%, leaf length by 67%, and leaf width by 27% as compared to the control treatment. Compared to the control, B. endophyticus IGPEB 33 and AMF individually significantly increased chlorophyll a by 81-58%, chlorophyll b by 68-37%, total chlorophyll by 74-53%, and carotenoid content by 67-55%. However, combination of B. endophyticus IGPEB 33 and AMF significantly increased chlorophyll a by 86%, chlorophyll b by 72%, total chlorophyll by 82%, and carotenoid content by 83% compared to the control. Additionally, plant-growth-promoting B. endophyticus IGPEB 33 and AMF inoculation improved soil nutrients and soil enzyme activities compared to the all treatments. Co-inoculation with plant-growth-promoting B. endophyticus and AMF could be an alternative for the production of ginger that is more beneficial to soil nutrient deficiencies. We suggest that a combination of plant-growth-promoting B. endophyticus and AMF inoculation could be a more sustainable and eco-friendly approach in a nutrient-deficient soil.

Efficacy of biological agents and fillers seed coating in improving drought stress in anise

Many plants, including anise, have tiny, non-uniform seeds with low and light nutrient reserves. The seeds also show a weak establishment, especially under stressful conditions where their accurate planting in the soil and optimal yield are tough. This study sought to improve anise seeds' physical and physiological characteristics under drought stress. To this end, two factorial experiments under laboratory and greenhouse conditions were performed in a completely randomized design with 4 and 3 replications, respectively. Five levels of seed inoculation (inoculation with T36 and T43 of Trichoderma harzianum, and CHA0 and B52 of Pseudomonas fluorescent, and non-inoculation which means that control seeds were not treated with microbial inoculant), three levels of coating (K10P20, K10P10V5, and non-coating), and three levels of drought stress (0, -3, and -6 bars) were considered as the factorial experiment [vermiculite (V), kaolin (K), and perlite (P) numbers refer to the amount of material used in grams]. The laboratory experiment revealed that the combined treatments of bio-agents with coating increased the physical and germination characteristics of anise seeds compared to the control treatment. The greenhouse experiment showed that drought stress reduced the initial growth indices. Still, the combination treatments of biological agents and coating (fillers) could alleviate the destructive effects of drought stress to some extent and improve these indices. The best treatment was provided by T36 and K10P20 in both experiments, which significantly increased morphological indices.

Trichoderma atroviride seed dressing influenced the fungal community and pathogenic fungi in the wheat rhizosphere

Fusarium crown rot and wheat sharp eyespot are major soil-borne diseases of wheat, causing serious losses to wheat yield in China. We applied high-throughput sequencing combined with qPCR to determine the effect of winter wheat seed dressing, with either Trichoderma atroviride HB20111 spore suspension or a chemical fungicide consisting of 6% tebuconazole, on the fungal community composition and absolute content of pathogens Fusarium pseudograminearum and Rhizoctonia cerealis in the rhizosphere at 180 days after planting. The results showed that the Trichoderma and chemical fungicide significantly reduced the amount of F. pseudograminearum in the rhizosphere soil (p < 0.05), and also changed the composition and structure of the fungal community. In addition, field disease investigation and yield measurement showed that T. atroviride HB20111 treatment reduced the whiteheads with an average control effect of 60.1%, 14.9% higher than the chemical treatment; T. atroviride HB20111 increased yield by 7.7%, which was slightly more than the chemical treatment. Therefore, T. atroviride HB20111 was found to have the potential to replace chemical fungicides to control an extended range of soil-borne diseases of wheat and to improve wheat yield.

Roles of Arbuscular Mycorrhizal Fungi on Soil Fertility: Contribution in the Improvement of Physical, Chemical, and Biological Properties of the Soil

Many of the world's soils are experiencing degradation at an alarming rate. Climate change and some agricultural management practices, such as tillage and excessive use of chemicals, have all contributed to the degradation of soil fertility. Arbuscular Mycorrhizal Fungi (AMFs) contribute to the improvement of soil fertility. Here, a short review focusing on the role of AMF in improving soil fertility is presented. The aim of this review was to explore the role of AMF in improving the chemical, physical, and biological properties of the soil. We highlight some beneficial effects of AMF on soil carbon sequestration, nutrient contents, microbial activities, and soil structure. AMF has a positive impact on the soil by producing organic acids and glomalin, which protect from soil erosion, chelate heavy metals, improve carbon sequestration, and stabilize soil macro-aggregation. AMF also recruits bacteria that produce alkaline phosphatase, a mineralization soil enzyme associated with organic phosphorus availability. Moreover, AMFs influence the composition, diversity, and activity of microbial communities in the soil through mechanisms of antagonism or cooperation. All of these AMF activities contribute to improve soil fertility. Knowledge gaps are identified and discussed in the context of future research in this review. This will help us better understand AMF, stimulate further research, and help in sustaining the soil fertility.

Salicylic acid affects mycorrhizal features, antioxidant enzyme activities and seed yield of linseed under water-deficit stress in open-field conditions

The research aims were to study salicylic acid (SA) effects on mycorrhiza [hyphal width (HW), vesicle diameter (VD) and mycorrhizal colonization (MC)] and interaction between them on greenness index (GI), drought tolerance index (DTI), antioxidant enzymes activities, and seed yield of linseed under drought. A factorial experiment was conducted in an open-field place with mycorrhiza [non-inoculation, Funneliformis mosseae (FM), and Rhizoglomus intraradices (RI)], SA (250 μM and non-SA), and irrigation levels [100%, 70%, and 40% field capacity (FC)] as treatments. Severe drought increased VD, MC, superoxide dismutase (SOD), ascorbate peroxidase (APX), and peroxidase activities while decreased GI, DTI, and yield. The RI-linseed had higher MC, GI, SOD, and glutathione reductase (GR) activities, but FM-linseed had greater VD and yield under drought. Inoculated linseed with both mycorrhiza showed a reduction in DTI and yield under SA than non-SA. In RI-linseed, SA increased GI, MC, HW, VD, catalase and GR, but decreased in FM-plants. Mycorrhiza (particularly RI) alleviated drought (40% FC)-caused negative effects on linseed via the improvement of SOD, APX, and GI. Regardless of other treatments, SA had negative effects on HW and VD, but SA effects varied depending on mycorrhizal species so that SA increased HW, VD, and MC in RI. Due to the positive correlation between MC and HW, SA reduces FM colonization by reducing the HW of FM. Totally, SA along with RI species can mitigate the harmful effects of drought and improve tolerance via increasing MC, HW, VD, catalase, peroxidase, and GR activities.

Biopriming with Seaweed Extract and Microbial-Based Commercial Biostimulants Influences Seed Germination of Five Abelmoschus esculentus Genotypes

Seed germination is a crucial step in plant propagation, as it controls seedling production, stand establishment and ultimately crop yield. Approaches that can promote seed germination of valuable crops remain of great interest globally. The current study evaluated the effect of biostimulant (Kelpak^® and plant-growth-promoting rhizobacteria—PGPR) biopriming on the seed germination of five (VI037996, VI046567, VI055421, VI050956, and VI033796) Abelmoschus esculentus genotypes. The germination responses of the bio-primed seeds were measured using six parameters, including final germination percentage (FGP), mean germination time (MGT), germination index (GI), coefficient of velocity of germination (CVG), germination rate index (GRI), and time spread of germination (TSG). Biostimulant application significantly affected MGT (1.1–2.2 days), CVG (1.4–5.9), and TSG (1.2–3.0 days). Genotype also significantly influenced the TSG (1–3 days). Significant interaction effect of biostimulant treatment and genotype was evident on the FGP, GI, and GRI of the germinated seeds. The most noteworthy effect was demonstrated by Kelpak^® (1:100) applied to genotype VI037996, with significantly improved FGP (82%), GI (238), and GRI (77%/day) when compared to the control. Overall, the current findings suggest the potential stimulatory effect of biostimulants (especially Kelpak^®) on the germination of Abelmoschus esculentus seeds. However, this influence was strongly dependent on the type of genotype.

Encapsulation of Pseudomonas libanensis in alginate beads to sustain bacterial viability and inoculation of Vigna unguiculata under drought stress

Conventional agricultural practices based on the application of synthetic fertilizers are increasingly considered as unsustainable. Under a forecasted scenario of drought for the next decades, there is a global demand for innovative and sustainable approaches to ameliorate plant performance. Here, encapsulating beneficial microbes (BMs) to promote plant growth is gaining attention. This study evaluates bacterial encapsulation using polymeric beads of alginate, testing the survival of Pseudomonas libanensis TR1 stored up to 90 days. Produced beads were subjected to different treatments (fresh, air-dried and pulverized), which resulted in a variable size range (1200-860 µm). After storage, bacterial viability was maintained, and air-dried beads displayed a higher number of colony-forming units (2 × 107). Then, a glasshouse experiment investigated the drought resistance (plant growth, biomass, and photosynthetic responses) of Vigna unguiculata plants inoculated with these alginate beads. After 10 days of complete water restriction, turgidity and relative water content of V. unguiculata were still high under drought stress (> 80%). Leaf and root growth and biomass did not evidence significant changes after water restriction even after P. libanensis inoculation. Plant photosynthetic parameters (stomatal conductance, net photosynthetic rate, leaf CO2 concentration, or F v'/F m') were slightly affected due to inoculation but the level of stress-induced minimal plant responses. In our experiment, water restriction might have been insufficient to downregulate photosynthetic efficiency and reduce plant growth, limiting our understanding of the role of P. libanensis inoculation in alleviating drought stress in V. unguiculata, but highlighting the important relationship between the stress level and agricultural benefits of using encapsulated BMs.

Modern Seed Technology: Seed Coating Delivery Systems for Enhancing Seed and Crop Performance

The objective of modern seed-coating technology is to uniformly apply a wide range of active components (ingredients) onto crop seeds at desired dosages so as to facilitate sowing and enhance crop performance. There are three major types of seed treating/coating equipment: dry powder applicator, rotary pan, and pelleting pan with the provisions to apply dry powders, liquids, or a combination of both. Additional terms for coatings produced from these types of equipment include dry coating, seed dressing, film coating, encrustments, and seed pelleting. The seed weight increases for these different coating methods ranges from <0.05% to >5000% (>100,000-fold range). Modern coating technology provides a delivery system for many other materials including biostimulants, nutrients, and plant protectants. This review summarizes seed coating technologies and their potential benefits to enhance seed performance, improve crop establishment, and provide early season pest management for sustainable agricultural systems.

Using microbial seed coating for improving cowpea productivity under a low-input agricultural system

BACKGROUND

Plant-growth-promoting rhizobacteria (PGPR) and arbuscular mycorrhizal (AM) fungi have the ability to enhance the growth, fitness, and quality of various agricultural crops, including cowpea. However, field trials confirming the benefits of microbes in large-scale applications using economically viable and efficient inoculation methods are still scarce. Microbial seed coating has a great potential for large-scale agriculture through the application of reduced amounts of PGPR and AM fungi inocula. Thus, in this study, the impact of seed coating with PGPR, Pseudomonas libanensis TR1 and AM fungus, Rhizophagus irregularis (single or multiple isolates) on grain yield and nutrient content of cowpea under low-input field conditions was evaluated.

RESULTS

Seed coating with P. libanensis + multiple isolates of R. irregularis (coatPMR) resulted in significant increases in shoot dry weight (76%), and in the number of pods and seeds per plant (52% and 56%, respectively) and grain yield (56%), when compared with non-inoculated control plants. However, seed coating with P. libanensis + R. irregularis single-isolate (coatPR) did not influence cowpea grain yield. Grain lipid content was significantly higher (25%) in coatPMR plants in comparison with control. Higher soil organic matter and lower pH were observed in the coatPMR treatment.

CONCLUSIONS

Our findings indicate that cowpea field productivity can be improved by seed coating with PGPR and multiple AM fungal isolates under low-input agricultural systems. © 2019 Society of Chemical Industry.

A Seed Coating Delivery System for Bio-Based Biostimulants to Enhance Plant Growth

A novel delivery method for the application of bio-based biostimulants as seed coatings was developed using different sources of liquid and powder forms of vermicompost and soy flour. Micronized vermicompost (MVC) and soy flour (SF) were mixed in different combinations as dry seed coating blends and applied using rotary pan seed coating equipment. The physical properties of coated seeds were measured, and as binder concentration increased, coating strength increased. The rates and percentages of germination of the newly developed coating formulations of SF+MVC did not decrease the germination parameters and were not significantly different than the control. However, the SF, SF with concentrated vermicompost extract, and SF + MVC from dairy manure increased the seedling vigor index by 24, 30, and 39 percent, respectively, compared to the control. Plant biometric parameters and nitrogen uptake per plant were also significantly higher for SF and SF+MVC coated seeds than the control, in a greenhouse environment. This is the first seed coating study to show an enhancement of plant growth with vermicompost, and vermicompost in combination with a plant-based protein that serves as a dry seed coating binder and biostimulant, respectively. Seed coatings developed in this study can serve as a model for development of the delivery systems of seeds for the application of bio-based biostimulants to enhance early plant growth.

Seed coating with beneficial microorganisms for precision agriculture

Seed coating is a technique of covering seeds with adhesive agents to improve seed performance and plant establishment while reducing production cost. To meet the needs of development of precision agriculture, seed coating has been widely used in agriculture as an effective means to alleviate biotic and abiotic stresses, thus enhancing crop growth, yield, and health. Plant growth promoting microorganisms (PGPM) are recognized as essential contributors to improving agricultural productivity via direct application to the rhizosphere and plant tissues, or seed inoculation. However, during conventional inoculation processes, several factors such as insufficient microbial survival, hindrance in the application of biocontrol inocula to the seeds and exposure to unsuitable temperature and light in subsequent seed storage, force us to explore efficient and reliable microbial application tools. Recently, biological seed coating with PGPM is proposed as an alternative to conventional seed treatment (such as fertilizer and protection products) due to its ecological safety and socio-economic aspects. In this review, microbial seed coating technology and its contribution to sustainable precision agriculture are well discussed and highlighted in the extensive table and elaborate schematic drawings.

ACC Deaminase Producing PGPR Bacillus amyloliquefaciens and Agrobacterium fabrum along with Biochar Improve Wheat Productivity under Drought Stress

Drought stress retards wheat plant’s vegetative growth and physiological processes and results in low productivity. A stressed plant synthesizes ethylene which inhibits root elongation; however, the enzyme 1-Aminocyclopropane-1-Carboxylate (ACC) deaminase catabolizes ethylene produced under water stress. Therefore, the ACC deaminase producing plant growth promoting rhizobacteria (PGPR) can be used to enhance crop productivity under drought stress. Biochar (BC) is an organically active and potentially nutrient-rich amendment that, when applied to the soil, can increase pore volume, cation exchange capacity and nutrient retention and bioavailability. We conducted a field experiment to study the effect of drought tolerant, ACC deaminase producing PGPR (with and without timber waste BC) on plant growth and yield parameters under drought stress. Two PGPR strains, Agrobacterium fabrum or Bacillus amyloliquefaciens were applied individually and in combination with 30 Mg ha−1 BC under three levels of irrigation, i.e., recommended four irrigations (4I), three irrigations (3I) and two irrigations (2I). Combined application of B. amyloliquefaciens and 30 Mg ha−1 BC under 3I, significantly increased growth and yield traits of wheat: grain yield (36%), straw yield (50%), biological yield (40%). The same soil application under 2I resulted in greater increases in several of the growth and yield traits: grain yield (77%), straw yield (75%), above- and below-ground biomasses (77%), as compared to control; however, no significant increases in chlorophyll a, b or total, and photosynthetic rate and stomatal conductance in response to individual inoculation of a PGPR strain (without BC) were observed. Therefore, we suggest that the combined soil application of B. amyloliquefaciens and BC more effectively mitigates drought stress and improves wheat productivity as compared to any of the individual soil applications tested in this study.

Seed Coating: A Tool for Delivering Beneficial Microbes to Agricultural Crops

Plant beneficial microbes (PBMs), such as plant growth-promoting bacteria, rhizobia, arbuscular mycorrhizal fungi, and Trichoderma, can reduce the use of agrochemicals and increase plant yield, nutrition, and tolerance to biotic-abiotic stresses. Yet, large-scale applications of PBM have been hampered by the high amounts of inoculum per plant or per cultivation area needed for successful colonization and consequently the economic feasibility. Seed coating, a process that consists in covering seeds with low amounts of exogenous materials, is gaining attention as an efficient delivery system for PBM. Microbial seed coating comprises the use of a binder, in some cases a filler, mixed with inocula, and can be done using simple mixing equipment (e.g., cement mixer) or more specialized/sophisticated apparatus (e.g., fluidized bed). Binders/fillers can be used to extend microbial survival. The most reported types of seed coating are seed dressing, film coating, and pelleting. Tested in more than 50 plant species with seeds of different dimensions, forms, textures, and germination types (e.g., cereals, vegetables, fruits, pulses, and other legumes), seed coating has been studied using various species of plant growth-promoting bacteria, rhizobia, Trichoderma, and to a lesser extent mycorrhizal fungi. Most of the studies regarding PBM applied via seed coating are aimed at promoting crop growth, yield, and crop protection against pathogens. Studies have shown that coating seeds with PBM can assist crops in improving seedling establishment and germination or achieving high yields and food quality, under reduced chemical fertilization. The right combination of biological control agents applied via seed coating can be a powerful tool against a wide number of diseases and pathogens. Less frequently, studies report seed coating being used for adaptation and protection of crops under abiotic stresses. Notwithstanding the promising results, there are still challenges mainly related with the scaling up from the laboratory to the field and proper formulation, including efficient microbial combinations and coating materials that can result in extended shelf-life of both seeds and coated PBM. These limitations need to be addressed and overcome in order to allow a wider use of seed coating as a cost-effective delivery method for PBM in sustainable agricultural systems.