A Review of the Current Knowledge of Thermal Stability of Anthocyanins and Approaches to Their Stabilization to Heat

Valorization and protection of anthocyanins from strawberries (Fragaria×ananassa Duch.) by acidified natural deep eutectic solvent based on intermolecular interaction

This study introduces an innovative approach for the valorization and protection of anthocyanins from 'Benihoppe' strawberry (Fragaria × ananassa Duch.) based on acidified natural deep eutectic solvent (NADES). Choline chloride-citric acid (ChCl-CA, 1:1) was selected and acidified to enhance the valorization and protection of anthocyanins through hydrogen bond. The optimal conditions (ultrasonic power of 318 W, extraction temperature of 61 °C, liquid-to-solid ratio of 33 mL/g, ultrasonic time of 19 min), yielded the highest anthocyanins of 1428.34 μg CGE/g DW. UPLC-Triple-TOF/MS identified six anthocyanins in acidified ChCl-CA extract. Stability tests indicated that acidified ChCl-CA significantly increased storage stability of anthocyanins in high temperature and light treatments. Molecular dynamics results showed that acidified ChCl-CA system possessed a larger diffusion coefficient (0.05 m2/s), hydrogen bond number (145) and hydrogen bond lifetime (4.38 ps) with a reduced intermolecular interaction energy (-1329.74 kcal/mol), thereby efficiently valorizing and protecting anthocyanins from strawberries.

Green Method Comparison and Optimization of Anthocyanin Recovery from "Sangiovese" Grape Pomace: A Critical Evaluation of the Design of Experiments Approach

Grape pomace is the main by-product obtained from wine production that is still enriched in bioactive compounds. Within a framework of waste/by-product reuse through a sustainable approach, various green methods were utilized in this work to recover anthocyanins from the pomace resulting from "Sangiovese" grape vinification. Ultrasound- and Microwave-Assisted Extractions (UAE and MAE) were coupled with the use of green solvents, such as acidified water, an ethanol/water mixture, and Natural Deep Eutectic Solvents (NaDES), and their efficacy was compared with that of a conventional method based on a methanol/acidified water mixture. The Total Anthocyanin Index ranged from 36.9 to 75.2 mg/g DW for UAE, and from 54.4 to 99.6 mg/g DW for MAE, while resulting in 47.1 mg/g DW for conventional extraction. A Design of Experiments (DoE) approach was applied to MAE, the most efficient technique. Temperature, time, and the solid-to-liquid ratio were set as X variables, while malvidin-3-O-glucoside content and antioxidant activity were used as response variables, measured by High-Performance Liquid Chromatography with Diode Array Detection (HPLC-DAD) and 2,2-Diphenyl-1-picrylhydrazyl (DPPH) assay, respectively. The correlation between temperature and time and the antioxidant activity of the extract was positive, while it was found to be negative when considering malvidin-3-O-glucoside concentration as a response variable. Thus, the optimal conditions in temperature, time and solid-to-liquid ratio were different depending on the chosen variable. The results underline the importance of selecting an accurate response when using the response surface methodology approach.

Anthocyanins as Natural Food Colorings: The Chemistry Behind and Challenges Still Ahead

Anthocyanins are polyphenolic O-glycosides widely responsible for the bright red, purple, and blue colors in the plant kingdom, including a great variety of fruits and vegetables. Hence, they have attracted considerable scientific and industrial interest as potential natural food colorings. However, individual anthocyanins are intrinsically reactive molecules combining electrophilic, nucleophilic, and electron-donating properties. This reactivity may be not only a source of color diversity with, for instance, the formation of new pigments upon winemaking and storage but also a cause of great color instability involving a combination of reversible and irreversible mechanisms (e.g., water addition, autoxidation) leading to colorless products. Hence, using anthocyanin-rich plant extracts as food colorings requires a deep understanding of these color-damaging mechanisms and, no less importantly, of the color-stabilizing mechanisms developed by plants, including π-stacking interactions (self-association, copigmentation), metal binding, and a combination of both. The potential of anthocyanins from deeply colored vegetables, typically acylated by hydroxycinnamic acid residues, will be emphasized in that respect. Moreover, food-grade biopolymers (proteins, polysaccharides) may provide suitable matrices for ready-to-use formulations of anthocyanins as food colorings. In this short review, the mechanisms of color loss and color stabilization are discussed as a function of anthocyanin structure and environment, and some challenges still ahead are outlined.

Unveiling the impact of high-pressure processing on anthocyanin-protein/polysaccharide interactions: A comprehensive review

Anthocyanins, natural plant pigments responsible for the vibrant hues in fruits, vegetables, and flowers, boast antioxidant properties with potential human health benefits. However, their susceptibility to degradation under conditions such as heat, light, and pH fluctuations necessitates strategies to safeguard their stability. Recent investigations have focused on exploring the interactions between anthocyanins and biomacromolecules, specifically proteins and polysaccharides, with the aim of enhancing their resilience. Notably, proteins like soy protein isolate and whey protein, alongside polysaccharides such as pectin, starch, and chitosan, have exhibited promising affinities with anthocyanins, thereby enhancing their stability and functional attributes. High-pressure processing (HPP), emerging as a non-thermal technology, has garnered attention for its potential to modulate these interactions. The application of high pressure can impact the structural features and stability of anthocyanin-protein/polysaccharide complexes, thereby altering their functionalities. However, caution must be exercised, as excessively high pressures may yield adverse effects. Consequently, while HPP holds promise in upholding anthocyanin stability, further exploration is warranted to elucidate its efficacy across diverse anthocyanin variants, macromolecular partners, pressure regimes, and their effects within real food matrices.

Dietary Sources, Stabilization, Health Benefits, and Industrial Application of Anthocyanins-A Review

Natural phytochemicals are well known to protect against numerous metabolic disorders. Anthocyanins are vacuolar pigments belonging to the parent class of flavonoids. They are well known for their potent antioxidant and gut microbiome-modulating properties, primarily responsible for minimizing the risk of cardiovascular diseases, diabetes, obesity, neurodegenerative diseases, cancer, and several other diseases associated with metabolic syndromes. Berries are the primary source of anthocyanin in the diet. The color and stability of anthocyanins are substantially influenced by external environmental conditions, constraining their applications in foods. Furthermore, the significantly low bioavailability of anthocyanins greatly diminishes the extent of the actual health benefits linked to these bioactive compounds. Multiple strategies have been successfully developed and utilized to enhance the stability and bioavailability of anthocyanins. This review provides a comprehensive view of the recent advancements in chemistry, biosynthesis, dietary sources, stabilization, bioavailability, industrial applications, and health benefits of anthocyanins. Finally, we summarize the prospects and challenges of applications of anthocyanin in foods.

The Antioxidant and Anti-Inflammatory Properties of Wild Bilberry Fruit Extracts Embedded in Mesoporous Silica-Type Supports: A Stability Study

Polyphenolic extracts from wild bilberries (Vaccinium myrtillus L.) have shown antioxidant and anti-inflammatory effects, but they are prone to degradation when exposed to environmental factors, limiting their use in biomedical applications. To overcome this issue, this study proposed the embedding of wild bilberry fruit ethanolic extracts in pristine mesoporous silica functionalized with organic groups (mercaptopropyl and propionic acid), as well as coated with fucoidan, a biopolymer. Herein, we report a stability study of free and incorporated extracts in mesoporous silica-type supports in high-humidity atmospheres at 40 °C up to 28 days, using HPLC analysis, thermal analysis, and radical scavenging activity determination. Better chemical and thermal stability over time was observed when the extracts were incorporated in mesoporous silica-type supports. After 12 months of storage, higher values of antioxidant activity were determined for the extract embedded in the supports, silica modified with mercaptopropyl groups (MCM-SH), and fucoidan-coated silica (MCM-SH-Fuc) than that of the free extract due to a synergistic activity between the support and extract. All encapsulated extracts demonstrated remarkable effects in reducing NO production in LPS-stimulated RAW 264.7 cells. The treatment with extract embedded in MCM-SH-Fuc in a dose of 10 μg/mL surpassed the effect of free extract in the same concentration. For the extract encapsulated in an MCM-SH support, a lower IC50 value (0.69 μg/mL) towards COX-2 was obtained, comparable with that of Indomethacin (0.6 μg/mL). Also, this sample showed a higher selectivity index (2.71) for COX-2 than the reference anti-inflammatory drug (0.98). The developed formulations with antioxidant and anti-inflammatory properties could be further used in nutraceuticals.

Extraction and Separation of Natural Products from Microalgae and Other Natural Sources Using Liquefied Dimethyl Ether, a Green Solvent: A Review

Microalgae are a sustainable source for the production of biofuels and bioactive compounds. This review discusses significant research on innovative extraction techniques using dimethyl ether (DME) as a green subcritical fluid. DME, which is characterized by its low boiling point and safety as an organic solvent, exhibits remarkable properties that enable high extraction rates of various active compounds, including lipids and bioactive compounds, from high-water-content microalgae without the need for drying. In this review, the superiority of liquefied DME extraction technology for microalgae over conventional methods is discussed in detail. In addition, we elucidate the extraction mechanism of this technology and address its safety for human health and the environment. This review also covers aspects related to extraction equipment, various applications of different extraction processes, and the estimation and trend analysis of the Hansen solubility parameters. In addition, we anticipate a promising trajectory for the expansion of this technology for the extraction of various resources.

Grape Pomace Rich-Phenolics and Anthocyanins Extract: Production by Pressurized Liquid Extraction in Intermittent Process and Encapsulation by Spray-Drying

A considerable number of grape pomaces are generated annually. It represents a rich source of bioactive compounds, such as phenolic compounds and anthocyanins. Pressurized liquid extraction (PLE) has emerged as a green technology for recovering bioactive compounds from vegetal matrixes. In our study, PLE parameters (temperature, number of cycles, and rinse volume) have been studied to produce grape pomace extracts with high bioactive content using an experimental design. The experimental data obtained were adjusted to linear and quadratic models. The first-order model was better in predicting anthocyanins contents (TA, R2 = 0.94), whereas the second-order model was predictive for total phenolic compounds (TPC, R2 = 0.96). The main process parameter for the recovery of bioactive compounds was temperature, and the results showed opposing behaviors concerning TPC and TA, as it is difficult to optimize conditions for both. The extract containing the higher concentration of TPC (97.4 ± 1.1 mg GAE/g, d.b.) was encapsulated by spray-drying using maltodextrin as wall material. Particles presented with a spherical shape (~7.73 ± 0.95 μm) with a recovery yield of 79%. The results demonstrated that extraction followed by encapsulation of grape pomace extract is a good strategy to simplify future applications, whether for food, cosmetics or pharmaceutical fields.

Recent advances incombined Avant-garde technologies (thermal-thermal, non-thermal-non-thermal, and thermal-non-thermal matrix) to extract polyphenols from agro byproducts

Because food byproducts (waste) are rich in phytoconstituents, valorizing them is crucial for global food security. However, conventional extraction (CE), including decoction, maceration, Soxhlet, etc., for agro byproducts' polyphenol extraction are time-consuming and rely significantly on vast volumes of potentially aggressive solvents. Hence, Avantgarde extraction technologies, including non-thermal (high hydrostatic pressure (HHPE), pulsed-electric field (PEF), high voltage electrical discharges (HVED), etc.) and thermal extraction (supercritical fluid (SCF), subcritical water extraction (SWE), microwave-assisted extraction (MAE), etc.), as well as their thermal combinations (SCF-PLE, SCCO2-SWE, SCCO2-MAE, etc.), non-thermal combinations (HHPE + UAE, PEF + UAE, HVED + UAE, etc.) and combined thermalnon-thermal (MAE-UAE, etc.) are increasingly replacing CE. However, a review of combined Avant-garde extraction escalation technologies (non-thermal/thermal extraction matrix) for extracting polyphenols from agro-byproducts is limited. Hence, this manuscript reviewed Avant-garde extraction technologies (non-thermal/thermal extraction matrix) for extracting phenolics from agro-byproducts in the last 5 years. The key factors affecting polyphenols' extraction from the byproduct, the recent applications of Avant-garde technologies, and their principle were reviewed using databases from Web of Science and Lens.org. The results demonstrated that combined Avant-garde extraction escalation technologies increase extractability, resulting in polyphenols with higher extraction rates, fewer contaminants, and preservation of thermosensitive components. Therefore, combined Avant-garde extraction technologies should be explored over the next five years. Implementing an integrated process and the strategic sequencing of diverse Avant-garde extraction technologies are important. Thus, further investigation is required to explore the sequencing process and its potential impact on the extraction of phenolics from agro-byproducts.

Green Synthesis of Low-Glycemic Amylose-Lipid Nanocomposites by High-Speed Homogenization and Formulation into Hydrogel

In this research, we focused on the production of amylose-lipid nanocomposite material (ALN) through a green synthesis technique utilizing high-speed homogenization. Our aim was to investigate this novel material's distinctive physicochemical features and its potential applications as a low-glycemic gelling and functional food ingredient. The study begins with the formulation of the amylose-lipid nanomaterial from starch and fatty acid complexes, including stearic, palmitic, and lauric acids. Structural analysis reveals the presence of ester carbonyl functionalities, solid matrix structures, partial crystallinities, and remarkable thermal stability within the ALN. Notably, the ALN exhibits a significantly low glycemic index (GI, 40%) and elevated resistance starch (RS) values. The research extends to the formulation of ALN into nanocomposite hydrogels, enabling the evaluation of its anthocyanin absorption capacity. This analysis provides valuable insights into the rheological properties and viscoelastic behavior of the resulting hydrogels. Furthermore, the study investigates anthocyanin encapsulation and retention by ALN-based hydrogels, with a particular focus on the influence of pH and physical cross-link networks on the uptake capacity presenting stearic-acid (SA) hydrogel with the best absorption capacity. In conclusion, the green-synthesized (ALN) shows remarkable functional and structural properties. The produced ALN-based hydrogels are promising materials for a variety of applications, such as medicine administration, food packaging, and other industrial purposes.

Protein and Peptide-Based Nanotechnology for Enhancing Stability, Bioactivity, and Delivery of Anthocyanins

Anthocyanin, a unique natural polyphenol, is abundant in plants and widely utilized in biomedicine, cosmetics, and the food industry due to its excellent antioxidant, anticancer, antiaging, antimicrobial, and anti-inflammatory properties. However, the degradation of anthocyanin in an extreme environment, such as alkali pH, high temperatures, and metal ions, limits its physiochemical stabilities and bioavailabilities. Encapsulation and combining anthocyanin with biomaterials could efficiently stabilize anthocyanin for protection. Promisingly, natural or artificially designed proteins and peptides with favorable stabilities, excellent biocapacity, and wide sources are potential candidates to stabilize anthocyanin. This review focuses on recent progress, strategies, and perspectives on protein and peptide for anthocyanin functionalization and delivery, i.e., formulation technologies, physicochemical stability enhancement, cellular uptake, bioavailabilities, and biological activities development. Interestingly, due to the simplicity and diversity of peptide structure, the interaction mechanisms between peptide and anthocyanin could be illustrated. This work sheds light on the mechanism of protein/peptide-anthocyanin nanoparticle construction and expands on potential applications of anthocyanin in nutrition and biomedicine.

Fabrication, performance, and potential environmental impacts of polysaccharide-based food packaging materials incorporated with phytochemicals: A review

Although food packaging preserves food's quality, it unfortunately contributes to global climate change since the considerable carbon emissions associated with its entire life cycle. Polysaccharide-based packaging materials (PPMs) are promising options to preserve foods, potentially helping the food industry reduce its carbon footprint. PPMs incorporated with phytochemicals hold promise to address this critical issue, keep food fresh and prolong the shelf life. However, phytochemicals' health benefits are impacted by their distinct chemical structures thus the phytochemicals-incorporated PPMs generally exhibit differential performances. PPMs must be thoughtfully formulated to possess adequate physicochemical properties to meet commercial standards. Given this, this review first-time provides a comprehensive review of recent advances in the fabrication of phytochemicals incorporated PPMs. The application performances of phytochemicals-incorporated PPMs for preserving foods, as well as the intelligent monitoring of food quality, are thoroughly introduced. The possible associated environmental impacts and scalability challenges for the commercial application of these PPMs are also methodically assessed. This review seeks to provide comprehensive insights into exploring new avenues to achieve a greener and safer food industry via innovative food packaging materials. This is paramount to preserve not only food shelf life but also the environment, facilitating the eco-friendly development of the food industry.

Microwave Hydrodiffusion and Gravity Extraction of Vitamin C and Antioxidant Compounds from Rosehips (Rosa canina L.)

Rosehips, Rosa canina L. (Rosaceae family), have been used for a long time for their beneficial effects on health, and they are largely exploited in the food and nutraceutical supplement sectors. The aim of this work was to apply and optimize for the first time the microwave hydrodiffusion and gravity (MHG) extraction of rosehips, as a novel application of solvent-free microwave extraction, previously conducted in a similar way only on mulberry, strawberry, and onion. The optimization was performed through a central composite design (CCD) by evaluating the effect of the experimental parameters on the yield; total polyphenol, flavonoid, and anthocyanin contents; radical scavenging activity; and content of vitamin C in the obtained extracts. As a result, the water moistening pretreatment was clearly revealed to possess a pivotal role in the quality of the rosehip extracts. Among the evaluated responses, the yield, the anthocyanin content, and the antioxidant activity were well described by the statistical model. Notably, the optimized MHG extract was compared with the ones obtained by conventional solvent extraction showing higher amounts of vitamin C, polyphenols, flavonoids, and anthocyanins, while the traditional extracts performed better in terms of yield. In conclusion, MHG represents a promising alternative to standard extraction methods for obtaining rosehip extracts rich in vitamin C and antioxidant compounds. In this respect, the results of our research support the employment of MHG on an industrial level for the production of rosehip-based food supplements enriched in vitamin C.

A Review of the Chemistry and Biological Activities of Natural Colorants, Dyes, and Pigments: Challenges, and Opportunities for Food, Cosmetics, and Pharmaceutical Application

Natural pigments are important sources for the screening of bioactive lead compounds. This article reviewed the chemistry and therapeutic potentials of over 570 colored molecules from plants, fungi, bacteria, insects, algae, and marine sources. Moreover, related biological activities, advanced extraction, and identification approaches were reviewed. A variety of biological activities, including cytotoxicity against cancer cells, antioxidant, anti-inflammatory, wound healing, anti-microbial, antiviral, and anti-protozoal activities, have been reported for different pigments. Considering their structural backbone, they were classified as naphthoquinones, carotenoids, flavonoids, xanthones, anthocyanins, benzotropolones, alkaloids, terpenoids, isoprenoids, and non-isoprenoids. Alkaloid pigments were mostly isolated from bacteria and marine sources, while flavonoids were mostly found in plants and mushrooms. Colored quinones and xanthones were mostly extracted from plants and fungi, while colored polyketides and terpenoids are often found in marine sources and fungi. Carotenoids are mostly distributed among bacteria, followed by fungi and plants. The pigments isolated from insects have different structures, but among them, carotenoids and quinone/xanthone are the most important. Considering good manufacturing practices, the current permitted natural colorants are: Carotenoids (canthaxanthin, β-carotene, β-apo-8'-carotenal, annatto, astaxanthin) and their sources, lycopene, anthocyanins, betanin, chlorophyllins, spirulina extract, carmine and cochineal extract, henna, riboflavin, pyrogallol, logwood extract, guaiazulene, turmeric, and soy leghemoglobin.

Stabilization of anthocyanins by simultaneous encapsulation-copigmentation via protein-polysaccharide polyelectrolyte complexes

This study prepared a series of polyelectrolyte complexes (PECs) composed of heated whey protein isolate (HWPI) and different polysaccharides for simultaneous encapsulation and copigmentation of anthocyanins (ATC) and their ultimate stabilization. Four polysaccharides including chondroitin sulfate, dextran sulfate, gum arabic, and pectin were chosen due to their abilities to simultaneously complex with HWPI and copigment ATC. At pH 4.0, these PECs were formed with an average particle size of 120-360 nm, the ATC encapsulation efficiency of 62-80%, and the production yield of 47-68%, depending on the type of polysaccharides. The PECs effectively inhibited the degradation of ATC during storage and when exposed to neutral pH, ascorbic acid, and heat. Pectin had the best protection, followed by gum arabic, chondroitin sulfate, and dextran sulfate. The stabilizing effects were associated with the hydrogen bonding, hydrophobic and electrostatic interactions between HWPI and polysaccharides, conferring dense internal network and hydrophobic microenvironment in the complexes.

The stability of phenolic compounds and the colour of lingonberry juice with the addition of different sweeteners during thermal treatment and storage

Lingonberries (Vaccinium vitis-idaea L.) are rich in phenolic compounds associated with several health benefits. The berries are also astringent, sour, and bitter and the addition of a sweetener is necessary to increase the palatability of lingonberry products. The addition of a sweetener may, however, affect the stability of phenolic compounds in the product. The aim of this study was thus to determine the effects of the addition of sweeteners (sucrose, acesulfame K or sucralose) and temperature on the stability of anthocyanins, flavonols, flavan-3-ols, hydroxycinnamic acids and the colour of lingonberry juice during thermal treatment and storage. The addition of sweeteners did not affect the stability of phenolic compounds or the colour of lingonberry juice during thermal treatment or storage. The stability of the phenolic compounds was significantly affected by temperature. Anthocyanins were the least stable of the phenolic compounds. The half-lives of total anthocyanins were 3.8, 2.0 and 0.8 h at 75, 85 and 95 °C, respectively. The half-lives during storage were 12.8 and 2.7 weeks at 6 and 22 °C, respectively. Cyanidin-3-galactoside, the major anthocyanin in lingonberries, was extensively degraded during storage, probably due to galactoside side-activities of the enzyme preparation used in juice production. After thermal treatment, the juices were darker and bluer, with lower chromaticity, while after storage, the juices were lighter, more yellow, and had higher chromaticity.

Combining eutectic solvents and food-grade silica to recover and stabilize anthocyanins from grape pomace

Concentrated in the skins of red grapes are the anthocyanins, the primary colorants responsible for the fruits' reddish-purple color. These colorants are recognized for their significant antioxidant properties and potent nutraceutical and pharmaceutical ingredients. Nevertheless, their widespread use is compromised by the (i) need for more efficient yet sustainable downstream processes for their recovery and (ii) by the challenges imposed by their poor stability. In this work, these drawbacks were overcome by applying eutectic solvents and stabilizing agents. Besides, the anthocyanins were successfully loaded into a solid host material (approved in both food and pharmaceutical sectors) based on silicon dioxide (SiO₂, loading capacity: 1_extract:7_silica m/m). Summing up, with the process developed, the extraction yield (21 mg_anthocyanins.g_biomass^-1) and the stability (under 55, 75, and 95 °C) of the recovered anthocyanins were over three times better than with the conventional process. Finally, the raw materials and solvents were recycled, allowing an economical and environmentally friendly downstream process.

A double-layer smart film based on gellan gum/modified anthocyanin and sodium carboxymethyl cellulose/starch/Nisin for application in chicken breast

In order to overcome this challenge of poor stability of natural anthocyanins in intelligent packaging materials, roselle anthocyanin (RA) was first modified by acetic acid, and then a double-layer smart indication antimicrobial film was developed using modified roselle anthocyanin (MRA)-gellan gum (GG) as the inner layer and sodium carboxymethyl cellulose (CMC)-starch (ST)-Nisin as the outer layer. UV spectra revealed that acetic acid was successfully grafted onto RA, which dramatically improved their thermal stability, antioxidant capabilities, photostability, and pH stability. The bilayer films were successfully prepared, as revealed by scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction measurements. In comparison to GG-MRA and CMC-ST-Nisin films, the water content, water solubility, mechanical characteristics, water vapor barrier, oxygen barrier, and hydrophobicity of GG-MRA@CMC-ST-Nisin films were significantly enhanced. The presence of the outer layer films significantly enhanced the UV-vis light barrier, opacity, antioxidant and antibacterial properties of the inner layer films. When the films were applied to chicken breast, it was found that the indicator films not only monitored the freshness of the chicken in real-time but also that the GG-MRA film and the double-layer film were effective in extending the shelf life of the chicken by 1 and 2 days, respectively, compared to the control group.

New insights of the application of water or ethanol-water plant extract rich in active compounds in food

Plants are recognized as natural sources of antioxidants (e.g., polyphenols, flavonoids, vitamins, and other active compounds) that can be extracted by green solvents like water, ethanol, or their binary mixtures. Plant extracts are becoming more used as food additives in various food systems due to their antioxidant abilities. Their application in food increases the shelf life of products by preventing undesirable changes in nutritional and sensory properties, such as the formation off-flavors in lipid-rich food. This review summarizes the most recent literature about water or ethanol-water plant extracts used as flavors, colorings, and preservatives to fortify food and beverages. This study is performed with particular attention to describing the benefits of plant extract-fortified products such as meat, vegetable oils, biscuits, pastries, some beverages, yogurt, cheese, and other dairy products. Antioxidant-rich plant extracts can positively affect food safety by partially or fully replacing synthetic antioxidants, which have lately been linked to safety and health issues such as toxicological and carcinogenic consequences. On the other hand, the limitations and challenges of using the extract in food should be considered, like stability, level of purity, compatibility with matrix, price, sensory aspects like distinct taste, and others. In the future, continuous development and a tendency to use these natural extracts as food ingredients are expected, as indicated by the number of published works in this area, particularly in the past decade.

Protein-binding approaches for improving bioaccessibility and bioavailability of anthocyanins

Color is an important characteristic of food. Over the last 15 years, more attention has been paid to natural colorants because of the rising demand for clean-label food products. Anthocyanins, which are a group of phytochemicals responsible for the purple, blue or red hues of many plants, offer a market advantage. In addition, anthocyanin-rich foods are associated with protection against cardiovascular disease, thrombosis, diabetes, cancer, microbial-based disorders, neurological disorders, and vision ailments. However, the real health value of anthocyanins, whether as a natural colorant or a functional ingredient, is dependent on the ultimate bioaccessibility and bioavailability in the human body. Many animal and human clinical studies revealed that, after intake of anthocyanin-rich foods or anthocyanin extracts, only trace amounts (< 1% of ingested content) of anthocyanins or their predicted metabolites were detected in plasma after a standard blood draw, which was indicative of low bioavailability of anthocyanins. Protein binding to anthocyanins is a strategy that has recently been reported to enhance the ultimate bioactivity, bioaccessibility, and bioavailability of anthocyanins as compared to anthocyanins delivered without a protein carrier. Therefore, in this review, we address anthocyanin properties in food processing and digestion, anthocyanin-protein complexes used in food matrices, and changes in the bioaccessibility and bioavailability of anthocyanins when bound into anthocyanin-protein complexes in foods. Finally, we summarize the challenges and prospects of this delivery system for anthocyanin pigments.

Thermal and pH stability of Justicia spicigera (Mexican honeysuckle) pigments: Application of mathematical probabilistic models to predict pigments stability

Kinetic and probabilistic (Time-to-Failure, TTF) models were used to predict the color (L*, a*, b* total color differences (ΔE), Hue and Chroma) stability of Justicia spicigera leaves pigments subjected to different temperatures (40 - 80 °C) and pHs (2 - 12). The change in pH caused different hues (from 60° = orange red to 268° = deep-blue) due to the shift effect of anthocyanins in the extract. Temperatures higher than 60 °C increased the color degradation. High heat sensitivity was observed at pH 4 (Ea = 90.27) and 10 (Ea = 154.99 kJ/mol). The Time-to-Failure model for both ΔE and Hue describes the effect of pH and temperature in the J. spicigera extracts. High pHs and temperatures applied to the extracts increased the probability of showing ΔEs > 4 or Hue changes over 20 %. Nearby the neutral region of pH, pigments of J. spicigera were more stable. The TTF model might be a useful tool to describe and predict the behavior of pigments added to foods.

Effects of thermal treatments on the characterisation of microencapsulated chlorophyll extract of Caulerpa racemosa

Caulerpa racemosa is a macroalga that has a green pigment, that is, chlorophyll. Chlorophyll is highly sensitive to damage during heat processing. In the present work, C. racemosa chlorophyll extract was microencapsulated with fish gelatine and Arabic gum coatings, using a freeze-drying technique, to protect against heat damage. The microcapsules were subjected to high temperatures (120, 140, and 160°C) for 5 h. The protective effect of microcapsules on chlorophyll stability was assessed by measuring chlorophylls a and b degradation, total phenolic content, antioxidant activity, functional group analysis, colour, particle size, and morphology via scanning electron microscopy. Chlorophyll b significantly decreased by 87.78% in comparison with chlorophyll a (61.49%) during heating; the characteristic green colour of chlorophyll changed to brownish-green following heat exposure. However, chlorophyll was still present in the microcapsules as detected by the presence of the functional group C=O bond at 1600 nm wavelength. The heat treatment did not affect microcapsule particle size and morphology. Particle size distribution ranged from 91.58 to 112.51 µm, and the microcapsule was flake-shaped. The activation energy of chlorophyll a was 19336.96 kJ/mol·K; this was higher than that of chlorophyll b, which was 1780.53 kJ/mol·K. Based on the results, microcapsules produced using fish gelatine and Arabic gum as coating materials were able to protect chlorophyll in C. racemosa extract from heat damage.

Bio-Based pH Indicator Films for Intelligent Food Packaging Applications

The widespread concerns about the environmental problems caused by conventional plastic food packaging and food waste led to a growing effort to develop active and intelligent systems produced from renewable biodegradable polymers for food packaging applications. Among intelligent systems, the most widely used are pH indicators, which are generally based on a pH-sensitive dye incorporated into a solid support. The objective of this study was to develop new intelligent systems based on renewable biodegradable polymers and a new bio-inspired pH-sensitive dye. The structure of the dye was elucidated through FT-IR and 1D and 2D NMR spectroscopic analyses. UV-VIS measurements of the dye solutions at various pH values proved their halochromic properties. Their toxicity was evaluated through theoretical calculations, and no toxicity risks were found. The new anthocyanidin was used for the development of biodegradable intelligent systems based on chitosan blends. The obtained polymeric films were characterized through UV-VIS and FT-IR spectroscopy. Their thermal properties were assessed through a thermogravimetric analysis, which showed a better stability of chitosan–PVA–dye and chitosan–starch–dye films compared to those of chitosan–cellulose–dye films and the dye itself. The films’ sensitivity to pH variations was evaluated through immersion in buffer solutions with pH values ranging from 2 to 12, and visible color changes were observed.

Thermal stability enhancement of berry anthocyanins by co-pigmentation with extracts from natural sources

The suitability of mandarin (MP), orange (OP) and pomegranate peel powders (PP) for co-pigmentation of dewberry, viburnum, red hawthorn, black hawthorn, and barberry anthocyanins was investigated. Spectrophotometric measurements indicated co-pigmentation causing both a hyperchromic effect (ΔABSmax = 5–13) and bathochromic shift (Δλ vis-max up to 13 nm). The degradation kinetics of anthocyanins were estimated at temperatures ranging from 70 to 90 °C. First-order reactions with rate constants of 0.45–2.93 min−1 and 0.30–2.00 min−1 were observed for the reference and PP co-pigmented samples, respectively. The t 1/2 values were 3.90–25.7 h for the reference and 5.8–38.5 h for the co-pigmented samples. The activation energy (E a) values were higher in co-pigmented samples (49.16–77.77 kJ/mol) than in reference samples (41.82–68.75 kJ/mol), except for black hawthorn, which had a lower E a value in the co-pigmented sample. The thermodynamic parameters (enthalpy, free energy, and entropy) evaluated indicated a positive effect of co-pigmentation on the thermal treatment of anthocyanins.

Red Wine Inspired Chromophores as Photodynamic Therapy Sensitizers

Hydroxypyranoflavylium (HPF) cations are synthetic analogs possessing the same basic chromophore as the pyranoanthocyanins that form during the maturation of red wine. HPF cations absorb strongly in the visible spectral region, and most are fluorescent, triplet-sensitize singlet oxygen formation in solution and are strong photooxidants, properties that are desirable in a sensitizer for photodynamic therapy (PDT). The results of this study demonstrate that several simple HPF dyes can indeed function as PDT sensitizers. Of the eight HPF cations investigated in this work, four were phototoxic to a human cervical adenocarcinoma cell line (HeLa) at the 1-10 μmol dm^-3 level, while only one of the eight compounds showed noticeable cytotoxicity in the dark. Neither a Type I nor a Type II mechanism can adequately rationalize the differences in phototoxicity of the compounds. Colocalization experiments with the most phototoxic compound demonstrated the affinity of the dye for both the mitochondria and lysosomes of HeLa cells. The fact that relatively modest structural differences, e.g., the exchange of an electron-donating substituent for an electron-withdrawing substituent, can cause profound differences in the phototoxicity, together with the relatively facile synthesis of substituted HPF cations, makes them interesting candidates for further evaluation as PDT sensitizers.

Probiotics in anthocyanin-rich fruit beverages: research and development for novel synbiotic products

Anthocyanin-rich fruit beverages are of special interest as functional products due to their antioxidant activity, antimicrobial properties against pathogens, and, more recently, evidence of prebiotic potential. The stability and bioactivity of anthocyanins, probiotics, prebiotics, and synbiotics have been extensively documented in beverage models and reviewed separately. This review summarizes the most recent works and methodologies used for the development of probiotic and synbiotic beverages based on anthocyanin-rich fruits with a synergistic perspective. Emphasis is made on key optimization factors and strategies that have allowed probiotic cultures to reach the minimum recommended doses to obtain health benefits at the end of the shelf life. The development of these beverages is limited by the high acidity and high content of phenolic compounds in anthocyanin-rich fruits. However, a proper selection of probiotic strains and strategies for their media adaptation may improve their viability in the beverages. Fermentation increases the viability of the probiotic cultures, improves the safety and stability of the product, and may increase its antioxidant capacity. Moreover, fermentation metabolites may synergistically enhance probiotic health benefits. On the other hand, the inoculation of probiotics without fermentation allows for synbiotic beverages with milder changes in terms of physicochemical and sensory attributes.

Nanoencapsulated anthocyanin as a functional ingredient: Technological application and future perspectives

Anthocyanins are an important group of phenolic compounds responsible for pigmentation in several plants, and regular consumption is associated with a reduced risk of several diseases. However, the application of anthocyanins in foods represents a challenge due to molecular instability. The encapsulation of anthocyanins in nanostructures is a viable way to protect from the factors responsible for degradation and enable the industrial application of these compounds. Nanoencapsulation is a set of techniques in which the bioactive molecules are covered by resistant biomaterials that protect them from chemical and biological factors during processing and storage. This review comprehensively summarizes the existing knowledge about the structure of anthocyanins and molecular stability, with a critical analysis of anthocyanins' nanoencapsulation, the main encapsulating materials (polysaccharides, proteins, and lipids), and techniques used in the formation of nanocarriers to protect anthocyanins. Some studies point to the effectiveness of nanostructures in maintaining anthocyanin stability and antioxidant activity. The main advantages of the application of nanoencapsulated anthocyanins in foods are the increase in the nutritional value of the food, the addition of color, the increase in food storage, and the possible increase in bioavailability after oral ingestion. Nanoencapsulation improves stability for anthocyanin, thus demonstrating the potential to be included in foods or used as dietary supplements, and current limitations, challenges, and future directions of anthocyanins' have also been discussed.

Complexation of Anthocyanin-Bound Blackcurrant Pectin and Whey Protein: Effect of pH and Heat Treatment

A complexation study between blackcurrant pectin (BCP) and whey protein (WP) was carried out to investigate the impact of bound anthocyanins on pectin−protein interactions. The effects of pH (3.5 and 4.5), heating (85 °C, 15 min), and heating sequence (mixed-heated or heated-mixed) were studied. The pH influenced the color, turbidity, particle size, and zeta-potential of the mixtures, but its impact was mainly significant when heating was introduced. Heating increased the amount of BCP in the complexes—especially at pH 3.5, where 88% w/w of the initial pectin was found in the sedimented (insoluble) fraction. Based on phase-separation measurements, the mixed-heated system at pH 4.5 displayed greater stability than at pH 3.5. Heating sequence was essential in preventing destabilization of the systems; mixing of components before heating produced a more stable system with small complexes (<300 nm) and relatively low polydispersity. However, heating WP before mixing with BCP prompted protein aggregation—producing large complexes (>400 nm) and worsening the destabilization. Peak shifts and emergence (800−1200 cm−1) in infrared spectra confirmed that BCP and WP functional groups were altered after mixing and heating via electrostatic, hydrophobic, and hydrogen bonding interactions. This study demonstrated that appropriate processing conditions can positively impact anthocyanin-bound pectin−protein interactions.

Chitin Nanofibril-Nanolignin Complexes as Carriers of Functional Molecules for Skin Contact Applications

Chitin nanofibrils (CN) and nanolignin (NL) were used to embed active molecules, such as vitamin E, sodium ascorbyl phosphate, lutein, nicotinamide and glycyrrhetinic acid (derived from licorice), in the design of antimicrobial, anti-inflammatory and antioxidant nanostructured chitin nanofibrils–nanolignin (CN-NL) complexes for skin contact products, thus forming CN-NL/M complexes, where M indicates the embedded functional molecule. Nano-silver was also embedded in CN-NL complexes or on chitin nanofibrils to exploit its well-known antimicrobial activity. A powdery product suitable for application was finally obtained by spray-drying the complexes co-formulated with poly(ethylene glycol). The structure and morphology of the complexes was studied using infrared spectroscopy and field emission scanning electron microscopy, while their thermal stability was investigated via thermo-gravimetry. The latter provided criteria for evaluating the suitability of the obtained complexes for subsequent demanding industrial processing, such as, for instance, incorporation into bio-based thermoplastic polymers through conventional melt extrusion. In vitro tests were carried out at different concentrations to assess skin compatibility. The obtained results provided a physical–chemical, morphological and cytocompatibility knowledge platform for the correct selection and further development of such nanomaterials, allowing them to be applied in different products. In particular, chitin nanofibrils and the CN-NL complex containing glycyrrhetinic acid can combine excellent thermal stability and skin compatibility to provide a nanostructured system potentially suitable for industrial applications.

Low-Molecular-Weight Synthetic Antioxidants: Classification, Pharmacological Profile, Effectiveness and Trends

Mounting research has been performed and published on natural antioxidants, more so than on synthetic ones, as key molecules that control oxidative damage and its pathway to disease. Since the discovery of vitamins, various fully synthetic or natural-identical compounds have been developed as stable small molecules translated into constantly active and completely controlled products which are widely exploited in the food and pharmaceutical industries. There is currently a debate within the literature about their mechanism of action, bioavailability, safety and real benefit for human health. Using a semiquantitative method and eligible criteria of selection, this review aimed to provide a very useful classification of antioxidants and a comprehensive cross-disciplinary description of 32 approved synthetic/natural-identical antioxidants, in terms of regulatory, antioxidant mechanism of action, safety issues, pharmacological properties, effectiveness in human health, timeline and future trends. Enriched interpretation of the data was obtained from summary bibliometrics, useful to portray the “good antioxidant” within the period 1966–2021 and, hopefully, to encourage further research.

Why Black Flowers? An Extreme Environment and Molecular Perspective of Black Color Accumulation in the Ornamental and Food Crops

Pollinators are attracted to vibrant flower colors. That is why flower color is the key agent to allow successful fruit set in food or ornamental crops. However, black flower color is the least attractive to pollinators, although a number of plant species produce black flowers. Cyanidin-based anthocyanins are thought to be the key agents to induce black color in the ornamental and fruit crops. R2R3-MYB transcription factors (TFs) play key roles for the tissue-specific accumulation of anthocyanin. MYB1 and MYB11 are the key TFs regulating the expression of anthocyanin biosynthesis genes for black color accumulation. Post-transcriptional silencing of flavone synthase II (FNS) gene is the technological method to stimulate the accumulation of cyanidin-based anthocyanins in black cultivars. Type 1 promoter of DvIVS takes the advantage of FNS silencing to produce large amounts of black anthocyanins. Exogenous ethylene application triggers anthocyanin accumulation in the fruit skin at ripening. Environment cues have been the pivotal regulators to allow differential accumulation of anthocyanins to regulate black color. Heat stress is one of the most important environmental stimulus that regulates concentration gradient of anthocyanins in various plant parts, thereby affecting the color pattern of flowers. Stability of black anthocyanins in the extreme environments can save the damage, especially in fruits, caused by abiotic stress. White flowers without anthocyanin face more damages from abiotic stress than dark color flowers. The intensity and pattern of flower color accumulation determine the overall fruit set, thereby controlling crop yield and human food needs. This review paper presents comprehensive knowledge of black flower regulation as affected by high temperature stress, and the molecular regulators of anthocyanin for black color in ornamental and food crops. It also discusses the black color-pollination interaction pattern affected by heat stress for food and ornamental crops.

Influence of the extraction method on the recovery of bioactive phenolic compounds from food industry by-products

Agro-foodindustries generate colossal amounts of non-edible waste and by-products, easily accessible as raw materials for up-cycling active phytochemicals. Phenolic compounds are particularly relevant in this field given their abundance in plant residues and the market interest of their functionalities (e.g. natural antioxidant activity) as part of nutraceutical, cosmetological and biomedical formulations. In "bench-to-bedside" achievements, sample extraction is essential because valorization benefits from matrix desorption and solubilization of targeted phytocompounds. Specifically, the composition and polarity of the extractant, the optimal sample particle size and sample:solvent ratio, as well as pH, pressure and temperature are strategic for the release and stability of mobilized species. On the other hand, current green chemistry environmental rules require extraction approaches that eliminate polluting consumables and reduce energy needs. Thus, the following pages provide an update on advanced technologies for the sustainable and efficient recovery of phenolics from plant matrices.