Development of Optimized Ultrasound-Assisted Extraction Methods for the Recovery of Total Phenolic Compounds and Anthocyanins from Onion Bulbs

Quantification of Minerals in Edible Mushrooms via Optimized Microwave-Assisted Digestion: Nutritional Contributions of Fe, Mg, Na, K, and Ca

The intake of mushrooms provides numerous beneficial properties for the correct functioning of the human body due to their rich content in carbohydrates, proteins, fibers, vitamins, and minerals. However, most of the reports are focused on the determination of bioactive compounds and only a few regarding the essential mineral content and the evaluation of the RDI. Thus, the aim of this study was to determine the mineral composition of different cultivated (A. bisporus and P. ostreatus) and wild edible mushrooms (A. crocodilinus, A. arvensis, A. silvicola, A. impudicus, M. mastoidea, M. rhacodes, and P. ostreatus) collected in the south of Spain and north of Morocco. First, the optimization of a microwave-assisted digestion method was carried out using a Box-Behnken design with a response surface methodology to quantify the total content of five metals: Fe, Mg, Na, K, and Ca in mushrooms. The samples were analyzed by FAAS and ICP-OES. The percentage of the RDI of each mineral covered by the intake of mushrooms was calculated. It was observed that a high percentage of RDI levels are covered and just exceeded for Fe. Thence, due to their beneficial properties and high content of essential minerals, mushrooms would be proposed as a valuable source of nutrients to manufacture some food supplements.

Quercetin-loaded sodium alginate/collagen/h-boron nitride potential wound dressings prepared using the Box-Behnken experimental design

BACKGROUND/AIMS

Natural and synthetic biocompatible polymers have received significant attention in the pharmaceutical industry due to their rapid and effective healing properties in the wound healing process. The aim of this study was to optimize the extraction of onions, the preparation of sodium alginate/collagen/hydrogen boron nitride (NaAlg/Col/h-BN) membranes using the Box-Behnken experimental design, and determine the optimal conditions for quercetin release. The study also aimed to investigate the antimicrobial and antioxidant activities of the prepared membranes and their therapeutic properties.

METHODS AND RESULTS

The prepared membranes were characterized by scanning electron microscopy (SEM), fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Antimicrobial activities were tested against Gram-negative (Gr-) Escherichia coli ATCC 25922, Klebsiella pneumonia, Enterobacter aerogenes, Gram-positive (Gr+) Staphylococcus aureus ATCC 25923, and Candida albicans ATCC 10231 pathogens. In vitro release studies were conducted to examine the therapeutic properties of the prepared membranes. The optimum conditions for the extraction of onions and the preparation of NaAlg/Col/h-BN membranes were found to be EtOH = 75 mL, t = 2 h, T = 45°C, and NaAlg = 1.0 g, Col = 2.0 g, and h-BN = 6% wt, respectively. The prepared membranes exhibited serious antimicrobial properties against S. aureus and C. albicans. The membranes also promoted the controlled release of quercetin for 24 h in vitro, indicating their potential as a new approach in wound treatment.

CONCLUSION

The study concludes that quercetin-filled NaAlg/Col/h-BN membranes have promising therapeutic properties for wound healing. The membranes exhibited significant antimicrobial and antioxidant properties, and their controlled release of quercetin suggests their potential for use in wound healing applications.

On the Valorization of Arbutus unedo L. Pomace: Polyphenol Extraction and Development of Novel Functional Cookies

The fruits of Arbutus unedo L. have a crimson colour and are enriched with remarkable concentrations of bioactive compounds such as anthocyanins and polyphenols. These fruits are commonly used in the production of a Portuguese Protected Geographical Indication distillate called "Aguardente de Medronho". During this process, a solid pomace is generated and presently discarded without valuable applications. In this work, two strategies have been developed for the valorisation of A. unedo pomace. The first approach considers the extraction of polyphenols from this by-product through the optimization of an ultrasound-assisted method using a Box-Behnken design coupled with response surface methodology. The results indicate that the temperature and the percentage of methanol, along with their interaction, significantly influence the total concentration of polyphenols and the antioxidant activity of the extracts obtained. The optimal conditions identified consider the extraction of 0.5 g of sample with 20 mL of a solvent containing 74% MeOH (aq), at a pH of 4.8, maintained at 70 °C for 15 min. On the other hand, the second valorisation strategy considered the use of A. unedo pomace in the development of functional cookies. The incorporation of 15-20% pomace in the cookie formulation was well-received by consumers. This incorporation results in an intake of ca. 6.55 mg of polyphenols per gram of cookie consumed, accompanied by an antioxidant activity of 4.54 mg Trolox equivalents per gram of cookie consumed. Overall, these results encourage the employment of A. unedo pomace either as a reliable source of extracts enriched in polyphenols or as a nutraceutical active ingredient in functional cookies, thereby positively impacting human health.

Optimization of microwave-assisted extraction of antioxidant compounds from spring onion leaves using Box-Behnken design

Many studies have explored the extraction of bioactive compounds from different onion solid wastes, such as bulb, skin, and peel. However, onion leaves have received limited attention despite their potential as a valuable source of nutraceutical compounds. This study aimed to valorise, for the first time, the agricultural waste in the form of spring onion leaves (CN, Cipollotto Nocerino) to obtain antioxidant-rich polyphenolic extracts. A Box-Behnken design (BBD) was used to assess the impact of microwave-assisted extraction (MAE) variables (temperature, time, extraction volume, and ethanol concentration) on total polyphenol content (TPC) measured by Folin-Ciocalteu method and the antioxidant power determined by FRAP assay. Response surface methodology (RSM) was applied, and regression equations, analysis of variance, and 3D response curves were developed. Our results highlighted that the TPC values range from 0.76 to 1.43 mg GAE g-1 dw, while the FRAP values range from 8.25 to 14.80 mmol Fe(II)E g-1 dw. The optimal extraction conditions predicted by the model were 60 °C, 22 min, ethanol concentration 51% (v/v), and solvent volume 11 mL. These conditions resulted in TPC and FRAP values of 1.35 mg GAE g-1 dw and 14.02 mmol Fe(II)E g-1 dw, respectively. Furthermore, the extract obtained under optimized conditions was characterized by UHPLC-ESI-Orbitrap-MS analysis. LC/MS-MS platform allowed us to tentatively identify various compounds belonging to the class of flavonoids, saponins, fatty acids, and lipids. Finally, the ability of CN optimal extract to inhibit the intracellular reactive oxygen species (ROS) release in a hepatocarcinoma cell line using an H2O2-induced oxidative stress model, was evaluated. The results highlighted the potential of CN extract as a valuable source of polyphenols with significant antioxidant properties, suitable for various applications in the food and pharmaceutical industries.

Comparison between Ultrasound- and Microwave-Assisted Extraction Methods to Determine Phenolic Compounds in Barley (Hordeum vulgare L.)

Barley (Hordeum vulgare L.) is one of the major cereal crops worldwide. It is grown not only to be used as fodder but also for human consumption. Barley grains are a great source of phenolic compounds, which are particularly interesting for their health-promoting antioxidant properties, among other benefits. Two extraction methods, namely ultrasound-assisted extraction (UAE) and microwave-assisted extraction (MAE), have been optimized and compared by using Box-Behnken design (BBD) to determine both the antioxidant power and the phenolic compound levels of the extracts. Three variables have been assessed based on these designs: solvent composition (% MeOH in water), temperature (°C), and sample-to-solvent ratio (mg sample mL^-1 solvent). The solvent composition used and the interaction between the solvent and the temperature were the most significant variables in terms of recovery of phenolic compounds and antioxidant capacity of the extracts. Short extraction times, a high precision level, and good recoveries have been confirmed for both methods. Moreover, they were successfully applied to several samples. Significant differences regarding the level of phenolic compounds and antioxidant power were revealed when analyzing three different barley varieties. Specifically, the amounts of phenolic compounds ranged from 1.08 to 1.81 mg gallic acid equivalent g^-1 barley, while their antioxidant capacity ranged from 1.35 to 2.06 mg Trolox equivalent g^-1 barley, depending on the barley variety. Finally, MAE was found to be slightly more efficient than UAE, presenting higher levels of phenolic compounds in the extracts.

Fast and green universal method to analyze and quantify anthocyanins in natural products by UPLC-PDA

This work developed a universal UPLC-PDA method based on safe reagents to analyze anthocyanins from different foods. Nine foods were studied by the developed chromatographic method, which was constructed using a solid core C18 column and a binary mobile phase composed of (A) water (0.25 mol_{citric acid}.L_solvent^-1), and (B) ethanol. A total running time of 6 min was obtained, the faster comprehensive method for anthocyanins analysis. Mass spectrometry analysis was employed to identify a comprehensive set of 53 anthocyanins comprising glycosylated and acylated cyanidin, pelargonidin, malvidin, peonidin, petunidin, and delphinidin derivatives. Cyanidin-3-O-glucoside (m/z⁺ 449) and cyanidin-3-O-rutinoside (m/z⁺ 595) were used as standards to validate the accuracy of the developed method. The analytical parameters were evaluated, including intra-day and inter-day precision, robustness, repeatability, retention factor (k), resolution, and peak symmetry factor. The current method demonstrated excellent chromatographic resolution, making it a powerful tool for analyzing anthocyanins pigments.

Assessment of Antioxidant Stability of Meat Pâté with Allium cepa Husk Extract

Antioxidants play a very important role in the food industry. Recently, both science and industry have shown substantial preference for natural antioxidants, including searching for antioxidant substances from natural sources without undesirable side effects. The purpose of this study was to evaluate the effect of adding Allium cepa husk extract at a volume of 68 or 34 μL/g of unsalted blanched materials to replace 34% and 17% of the beef broth, respectively, which corresponded to a total antioxidant capacity (TAC) of 44.4 or 22.2 μmol-equiv. Q/100 g meat pté (i.e., 13.42 or 6.71 mg of quercetin/100 g meat pté), on the quality and safety indicators of the developed meat pté. The TAC according to a ferric reducing antioxidant power assay, thiobarbituric acid reactive substances, and physicochemical and microbiological characteristics were determined during the storage of the meat pté. Proximal and UPLC-ESI-Q-TOF-MS analyses were also performed. The addition of yellow onion husk ethanolic extract to the meat pté at both volumes allowed the maintenance of an increased content of antioxidants, which contributed to a decrease in the generation of secondary products of lipid peroxidation for 14 days of storage at 4 ∘C. The results of the microbiological analyses showed that the developed meat ptés were safe according to all indicators of microbial spoilage within 10 days of production. The results supported the use of yellow onion husk extract in the food industry to contribute to improving the functionality of meat products, developing products for a healthy lifestyle, and providing clean-label foods without or with a minimal content of synthetic additives.

Evaluation of carbon dioxide elevation on phenolic compounds and antioxidant activity of red onion (Allium cepa L.) during postharvest storage

Carbon dioxide (CO₂) is considered one of the eco-related key factors that negatively affect global climatic change. Also, CO₂ can play an important role in the postharvest quality of the agri-products. In this study, the impact of CO₂ on the quality of postharvest onions that were stored at 23 °C for 8 weeks was investigated. The weight loss, phenolic, flavonoid, flavanol, anthocyanin, antioxidant activity, and soluble sugar were analyzed during the study period. The results showed that 20% CO₂ treatment was significantly (P > 0.05) more effective than 15% CO₂ and control in inhibiting weight loss. Additionally, 20% CO₂ treatment significantly retained higher antioxidant enzyme activities such as CAT, APX, and SOD than 15% CO₂ and control. During storage, 20% CO₂ treatment significantly (P < 0.05) improved glucose, fructose, and sucrose levels by more than 15% CO₂ exposure and control groups. Besides the chlorogenic acid, kaempferol and quercetin were significantly (P < 0.05) higher in the 20% CO₂ than in the 15% CO₂ after 2 weeks of storage. In conclusion, this study's novelty comes from the broad prospects of using CO₂ for maximizing the stored onion phytochemical functionality that is usually affected by the room temperature long storage. This will help in the onion shelf-life extension by considering the quality-related attributes.

Application of Direct Thermal Desorption-Gas Chromatography-Mass Spectrometry for Determination of Volatile and Semi-Volatile Organosulfur Compounds in Onions: A Novel Analytical Approach

The population is now more aware of their diets due to the connection between food and general health. Onions (Allium cepa L.), common vegetables that are minimally processed and grown locally, are known for their health-promoting properties. The organosulfur compounds present in onions have powerful antioxidant properties and may decrease the likelihood of developing certain disorders. It is vital to employ an optimum approach with the best qualities for studying the target compounds to undertake a thorough analysis of these compounds. In this study, the use of a direct thermal desorption-gas chromatography-mass spectrometry method with a Box-Behnken design and multi-response optimization is proposed. Direct thermal desorption is an environmentally friendly technique that eliminates the use of solvents and requires no prior preparation of the sample. To the author's knowledge, this methodology has not been previously used to study the organosulfur compounds in onions. Likewise, the optimal conditions for pre-extraction and post-analysis of organosulfur compounds were as follows: 46 mg of onion in the tube, a desorption heat of 205 °C for 960 s, and a trap heat of 267 °C for 180 s. The repeatability and intermediate precision of the method were evaluated by conducting 27 tests over three consecutive days. The results obtained for all compounds studied revealed CV values ranging from 1.8% to 9.9%. The major compound reported in onions was 2,4-dimethyl-thiophene, representing 19.4% of the total area of sulfur compounds. The propanethial S-oxide, the principal compound responsible for the tear factor, accounted for 4.5% of the total area.

In Situ Adsorption of Red Onion (Allium cepa) Natural Dye on Cellulose Model Films and Fabrics Exploiting Chitosan as a Natural Mordant

Synthetic dyes and chemicals create an enormous impact on environmental pollution both in textile manufacturing and after the product's lifetime. Biobased plant-derived colorants and mordants have great potential for the development of more sustainable textile dyeing processes. Colorants isolated from biomass residues are renewable, biodegradable, and usually less harmful than their synthetic counterparts. Interestingly, they may also bring additional functions to the materials. However, the extraction and purification of the biocolorants from biomass as well as their dyeing efficiency and color fastness properties require a more thorough examination. Here, we extracted red onion (Allium cepa) skins to obtain polyphenolic flavonoids and anthocyanins as biocolorants, characterized the chemical composition of the mixture, and used a quartz crystal microbalance and thin films of cellulose nanofibrils to study the adsorption kinetics of dyes onto cellulose substrates in situ. The effect of different mordants on the adsorption behavior was also investigated. Comparison of these results with conventional dyeing experiments of textiles enabled us to determine the interaction mechanism of the dyes with substrates and mordants. Chitosan showed high potential as a biobased mordant based both on its ability to facilitate fast adsorption of polyphenols to cellulose and its ability to retain the purple color of the red onion dye (ROD) in comparison to the metal mordants FeSO₄ and alum. The ROD also showed excellent UV-shielding efficiency at low concentrations, suggesting that biocolorants, due to their more complex composition compared to synthetic ones, can have multiple actions in addition to providing aesthetics.

Barbero G, Palma M, Carrera C. Optimization of a Microwave Assisted Extraction Method for Maximum Flavonols and Antioxidant Activity of Onion Extracts

Nowadays, consumers demand bioactive foods that have the potential to limit the risk of suffering from several medical conditions. Onions present these desirable capabilities owing to its high content in antioxidant bioactive compounds. This work has used a Box-Behnken design with a response surface methodology to determine the best conditions in which to extract the polyphenols that are found in onions. Two extraction methods-one for the extraction of total flavonols and another one intended to obtain extracts with the highest possible antioxidant activity-have been developed and optimized. The following factors have been studied: temperature, %methanol in water, solvent pH, and sample-solvent volumetric ratio. The optimal conditions for the extraction of flavonols were 93.8% methanol in water, pH 2, 50 °C extraction temperature and 0.2:17.9 g:mL sample-solvent ratio. The best antioxidant activity levels were registered when using 74.2% methanol in water, pH 2, 99.9 °C extraction temperature and 0.2:18.2 g:mL sample-solvent ratio. Both optimized methods used short extraction times, and presented good precision levels and successful results when used with an assortment of onion varieties. According to total flavonols and antioxidant activity data, with 7.557 ± 0.3261 and 12.08 ± 0.0379 mg g^-1, respectively, the developed methods achieved comparable or even superior results to those obtained by other authors.

Onion anthocyanins: Extraction, stability, bioavailability, dietary effect, and health implications

Anthocyanins are high-value compounds, and their use as functional foods and their natural colorant have potential health benefits. Anthocyanins seem to possess antioxidant properties, which help prevent neuronal diseases and thereby exhibit anti-inflammatory, chemotherapeutic, cardioprotective, hepatoprotective, and neuroprotective activities. They also show different therapeutic effects against various chronic diseases. Anthocyanins are present in high concentrations in onion. In recent years, although both conventional and improved methods have been used for extraction of anthocyanins, nowadays, improved methods are of great importance because of their higher yield and stability of anthocyanins. In this review, we compile anthocyanins and their derivatives found in onion and the factors affecting their stability. We also analyze different extraction techniques of anthocyanins. From this point of view, it is very important to be precisely aware of the impact that each parameter has on the stability and subsequently potentiate its bioavailability or beneficial health effects. We present up-to-date information on bioavailability, dietary effects, and health implications of anthocyanins such as antioxidant, antidiabetic, anticancerous, antiobesity, cardioprotective, and hepatoprotective activities.

Improvement of the Ultrasound-Assisted Extraction of Polyphenols from Welsh Onion (Allium fistulosum) Leaves Using Response Surface Methodology

Welsh onion (Allium fistulosum) leaves contain several bioactive compounds that can be extracted and used to develop new value-added products (e.g., functional foods and dietary supplements). In the current work, optimal ultrasound-assisted extraction (UAE) conditions to obtain extracts with high polyphenols content and DPPH (1,1-diphenyl-2-picrylhydrazil) scavenging activity were identified using response surface methodology. A complete 3^k factorial design was used to evaluate the effect of different variables of the UAE (extraction temperature, time, and ethanol concentration) on the polyphenols content and the DPPH scavenging activity of the extracts. The best conditions for UAE to reach both the highest values of total polyphenols content (51.78 mg GAE/100 g) and DPPH scavenging activity (34.07 mg Trolox equivalents/100 g) were an extraction temperature of 60 °C, time of 10 min, and ethanol concentration of 70% v/v. The antioxidant activity of the extracts obtained at the optimal conditions was also evaluated by 2,2′-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) and ferric reducing antioxidant power (FRAP) assays obtaining values of 155.51 ± 2.80 μM Trolox/100 g and 1300.21 ± 65.55 μM Trolox/100 g, respectively. Moreover, these extracts were characterized by UHPLC-ESI+-Orbitrap-MS analysis finding that cyanidin (6.0 mg/kg) was the phenolic compound found in the highest amount followed by quercetin-3-glucoside (4.4 mg/kg).

A New Electrochemical Method to Determine Tryptophan in Fruit Juices: Development and Validation

Tryptophan (Trp) is an essential amino acid usually found in fruit juices. Its determination is necessary for food companies because of its relation to human health. In this work, a new electrochemical method based on sonogel–carbon electrodes (SNGCEs) was developed and validated using an ultra performance liquid chromatography (UPLC) method as a reference method for the determination of Trp in fruit juices. Cyclic voltammetry (CV), chronoamperometry, and differential pulse voltammetry (DPV) techniques were applied to investigate the oxidation of Trp on a previously polarized SNGCE surface in a Britton–Robinson (BR) buffer solution at pH 3.6. The operating conditions for electroanalysis were optimized using a Box–Behnken design (BBD), obtaining an oxidation peak for Trp at 0.749 V. The linear range for this method was from 0.1 to 5 mg/L. The intraday and interday precision, expressed as a relative standard deviation (RSD), were 3.1% and 2.7%, respectively. The average recovery was 99.01%, and the limit of detection and quantitation were 0.33 and 1.09 mg/L, respectively. Therefore, from the quality analytical parameters obtained, it can be concluded that the new electrochemical method can be successfully used for the routine analysis of Trp in fruit juices. As far as we are concerned, this is the first time that a methodology for Trp determination was performed in this kind of real food matrices.

Differences in Antioxidant Potential of Allium cepa Husk of Red, Yellow, and White Varieties

The effective management of agro-industry organic waste for developing high-commercial-value products is a promising facet of the circular economy. Annually, more than 550,000 tons of waste that is potentially rich in biologically active substances is generated worldwide while processing onions (Allium cepa L.). The antioxidant potential of red, yellow, and white onion husks was studied using FRAP, ORAC, chemiluminescence, and UPLC-ESI-Q-TOF-MS analysis methods. The extraction of phenolic compounds from onion husks was more effective when using an aqueous solution of 70% ethanol as compared with water. Ethanolic extract from red onion husks exhibited the highest TAC_ORAC and TAC_FRAP values, averaging 2017.34 µmol-equiv. Trolox/g raw material and 2050.23 µmol-equiv. DQ/g raw material, respectively, while the white onion exhibited much lower levels of antioxidants. According to the chemiluminescence results, it was determined that the red and yellow onion husks contained antioxidants of three types of power, while white onion husks only contained medium and weak types. The highest content of flavonoids was found in red onion husks, averaging 1915.90 ± 9.92 µg-eq. DQ/g of raw material and 321.42 ± 2.61 µg-eq. DQ/g of raw material for ethanol and water, respectively, while yellow onion husks exhibited 544.06 ± 2.73 µg-eq. DQ/g of raw material and 89.41 ± 2.08 for ethanol and water, respectively. Quercetin and its glycosides were the most representative flavonoids, and a number of substances with different pharmacological and biological properties were also identified.

Extraction of Antioxidant Compounds from Onion Bulb (Allium cepa L.) Using Individual and Simultaneous Microwave-Assisted Extraction Methods

Despite the excellent beneficial properties that anthocyanins and total phenolic compounds give to the red onion bulbs, few articles have investigated modern extraction techniques or experimental designs in this field. For this reason, the present study proposes the development and optimization of alternative methods for the extraction of these compounds based on microwave-assisted extraction and the Box-Behnken experiment design. The optimal values for the extraction of total anthocyanins have been established at 62% methanol composition as a solvent, pH 2, 56 °C temperature, and 0.2:13 g:mL sample-solvent ratio. Regarding the extraction of total phenolic compounds, the optimal conditions have been established at 100% pure methanol as a solvent with pH 2, 57 °C temperature, and 0.2:8.8 g:mL sample-solvent ratio. Short extraction times (min), good recoveries (mg of bioactive compound g⁻¹ of dry onion), and high repeatability and intermediate precision (coefficient of variation (%)) have been confirmed for both methods. Regarding total anthocyanins, the following results have been obtained: 2 min, 2.64 ± 0.093 mg of total anthocyanins g⁻¹ of dry onion, and 2.51% and 3.12% for precision. Regarding phenolic compounds, the following results have been obtained: 15 min, 7.95 ± 0.084 mg of total phenolic compound g⁻¹ of dry onion, and 3.62% and 4.56% for precision. Comparing these results with those of other authors and with those obtained in a previous study of ultrasound-assisted extraction, it can be confirmed that microwave-assisted extraction is a quantitative, repeatable, and very promising method for the extraction of phenolic compounds and anthocyanins, which offers similar and even superior results with little solvent expense, time, and costs.

Valorization of ‘Rossa di Tropea’ Onion Waste through Green Recovery Techniques of Antioxidant Compounds

The aim of this work was to maximize the recovery of the bioactive components from an important solid waste derivate from Tropea onion processing. To achieve this, three different extractive procedures (conventional for maceration, ultrasound, and microwave-assisted) were employed, using only food-grade extraction solvents such as water and ethanol:water (50:50). Solvent, temperature, microwave power, time, and their interaction were studied as the principal factors that might affect the extractability rates. The obtained data suggest that the hydroalcoholic mixture proved to be the best for each of the techniques developed and at each time and temperature considered. In particular, the best results were achieved by conventional extraction for 60 min at 40 °C (total flavonoids content: 25.64 ± 1.40 mg QE g−1 d.w.; total anthocyanins content: 0.78 ± 0.01 mg C-3-GLUC g−1 d.w.). The UHPLC analysis of the optimally obtained extract revealed that the principal phytochemicals recovered were quercetin (5322.61 ± 0.32 mg kg−1) and quercetin 3-4′-diglucoside (1023.80 ± 0.34 mg kg−1) after conventional and ultrasound-assisted extraction, respectively. In this perspective, the implementation of sustainable, food-grade extraction processes to recover value-added substances from solid onion waste could play a crucial role both in reducing the waste load and in formulating natural food additives with functional properties, with a potential direct industrial impact.