Resuspendable Powders of Lyophilized Chalcogen Particles with Activity against Microorganisms

To Cut the Mustard: Antimicrobial Activity of Selenocyanates on the Plate and in the Gas Phase

Organic selenocyanates (RSeCN) are among the most reactive and biologically active Se species, often exhibiting a pronounced cytotoxic activity against mammalian cells and microorganisms. Various aromatic selenocyanates have been synthesized and, similar to some of the most Reactive Sulfur Species (RSS), such as allicin, found to be active against a range of bacteria, including Escherichia coli, Pseudomonas syringae and Micrococcus luteus, and fungi, including Verticillium dahlia, Verticillium longisporum, Alternaria brassicicola, and Botrytis cinerea, even via the gas phase. The highest antimicrobial activity has been observed for benzyl selenocyanate, which inhibited the growth of all bacteria considerably, even at the lowest tested concentration of 50 µM. Notably, neither the analogues thiocyanate (BTC) nor isothiocyanate (BITC) show any of these activities, rendering this selenium motif rather special in activity and mode of action. Eventually, these findings advocate a range of potential applications of organic selenocyanates in medicine and agriculture.

Cucumber-Derived Exosome-like Vesicles and PlantCrystals for Improved Dermal Drug Delivery

(1) Background: Extracellular vesicles (EVs) are considered to be efficient nanocarriers for improved drug delivery and can be derived from mammalian or plant cells. Cucumber-derived EVs are not yet described in the literature. Therefore, the aim of this study was to produce and characterize cucumber-derived EVs and to investigate their suitability to improve the dermal penetration efficacy of a lipophilic active ingredient (AI) surrogate. (2) Methods: The EVs were obtained by classical EVs isolation methods and by high pressure homogenization (HPH). They were characterized regarding their physico-chemical and biopharmaceutical properties. (3) Results: Utilization of classical isolation and purification methods for EVs resulted in cucumber-derived EVs. Their dermal penetration efficacy for the AI surrogate was 2-fold higher when compared to a classical formulation and enabled a pronounced transdermal penetration into the viable dermis. HPH resulted in submicron sized particles composed of a mixture of disrupted plant cells. A successful isolation of pure EVs from this mixture was not possible with classical EVs isolation methods. The presence of EVs was, therefore, proven indirectly. For this, the lipophilic drug surrogate was admixed to the cucumber juice either prior to or after HPH. Admixing of the drug surrogate to the cucumber prior to the HPH resulted in a 1.5-fold increase in the dermal penetration efficacy, whereas the addition of the AI surrogate to the cucumber after HPH was not able to improve the penetration efficacy. (4) Conclusions: Results, therefore, indicate that HPH causes the formation of EVs in which AI can be incorporated. The formation of plant EVs by HPH was also indicated by zeta potential analysis.

Synthesis of Highly Near-Infrared Fluorescent Graphene Quantum Dots Using Biomass-Derived Materials for In Vitro Cell Imaging and Metal Ion Detection

Graphene quantum dots (GQDs) are a subset of fluorescent nanomaterials that have gained recent interest due to their photoluminescence properties and low toxicity and biocompatibility features for bioanalysis and bioimaging. However, it is still a challenge to prepare highly near-infrared (NIR) fluorescent GQDs using a facile pathway. In this study, NIR GQDs were synthesized from the biomass-derived organic molecule cis-cyclobutane-1,2-dicarboxylic acid via one-step pyrolysis. The resulting GQDs were then characterized by various analytical methods such as UV-Vis absorption spectroscopy, fluorescence spectroscopy, dynamic light scattering, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Moreover, the photostability and stability over a wide pH range were also investigated, which indicated the excellent stability of the prepared GQDs. Most importantly, two peaks were found in the fluorescence emission spectra of the GQDs, one of which was located in the NIR region of about 860 nm. Finally, the GQDs were applied for cell imaging with human breast cancer cell line, MCF-7, and cytotoxicity analysis with mouse macrophage cell line, RAW 246.7. The results showed that the GQDs entered the cells through endocytosis on the fluorescence images and were not toxic to the cells up to a concentration of 200 μg/mL. Thus, the developed GQDs could be a potential effective fluorescent bioimaging agent. Finally, the GQDs depicted fluorescence quenching when treated with mercury metal ions, indicating that the GQDs could be used for mercury detection in biological samples as well.

Production and Characterization of Sumac PlantCrystals: Influence of High-Pressure Homogenization on Antioxidant Activity of Sumac (Rhus coriaria L.)

Oxidative stress diseases are usually treated or prevented by using antioxidants from natural or artificial sources. However, as a sustainable source of phytochemicals, plants got a renewed interest in obtaining their active agents using green extraction technologies, i.e., sustainable extraction techniques that reduce energy consumption, use renewable sources and result in less post-extraction wastes. The high-pressure homogenization (HPH) technique was introduced into the food industry since it was invented in 1900 to homogenize milk and later to produce fruit juices with a longer shelf-life without preservatives. Recently, HPH was introduced as an eco-friendly method to nanomill plants for improved extraction efficacy without using organic solvents. In this study, sumac was used as an antioxidants-rich spice model to investigate the effects of HPH on its antioxidant capacity (AOC). Sumac was rendered into PlantCrystals by using HPH. Particle size characterization proved the presence of submicron-sized particles (about 750 nm). Thus, HPH was able to produce sumac PlantCrystals and increased the AOC of bulk sumac by more than 650% according to the ORAC (oxygen radical absorbance capacity) assay. The polyphenol and flavonoid contents showed higher values after HPH. Interestingly, the DPPH (1,1-diphenyl-2-picrylhydrazyl) assay also showed a well improved AOC (similar to ascorbic acid) after HPH. In fact, in this study, the PlantCrystal-technology was demonstrated to cause an efficient cell rupture of the sumac plant cells. This caused an efficient release of antioxidants and resulted in sumac PlantCrystals with a 6.5-fold higher antioxidant capacity when compared to non-processed sumac bulk material.

Unleashing the Biological Potential of Fomes fomentarius via Dry and Wet Milling

Fomes fomentarius, usually referred to as tinder conk, is a common wood-based fungus rich in many interesting phytochemicals and with an unique porous structure. Dry or wet ball milling of this sponge on a planetary mill results in small particles with sizes in the range of 10 µm or below. Suspended in water and without preservatives or other stabilizers, the resulting micro-suspensions are sterile for around six days, probably due to the increased temperatures of around 80 °C especially during the wet milling process. The suspensions also exhibit excellent antioxidant activities as determined in the DPPH, ferric reducing antioxidant potential (FRAP) and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) assays. In the DPPH assay, IC₅₀ values of 0.02–0.04% w/v and 0.04% w/v were observed for dry and wet milled samples, respectively. In the FRAP assay, IC₅₀ values of <0.02% w/v and 0.04% w/v were observed for dry and wet milled samples, respectively. In contrast, the ABTS assay provided IC₅₀ values of 0.04% w/v and 0.005% w/v, respectively. Notably, this activity is mostly—albeit not exclusively—associated with the highly porous particles and their large surfaces, although some active ingredients also diffuse into the surrounding aqueous medium. Such suspensions of natural particles carrying otherwise insoluble antioxidants on their surfaces provide an interesting avenue to unleash the antioxidant potential of materials such as sponges and barks. As dry milling also enables longer storage and transport, applications in the fields of medicine, nutrition, agriculture, materials and cosmetics are feasible.

Effect of Fe3O4 and CuO Nanoparticles on Morphology, Genotoxicity, and miRNA Expression on Different Barley (Hordeum vulgare L.) Genotypes

Metal nanoparticles (NPs) have an influence on plant growth and development. They can alter plant shoot and root length, fresh biomass production, and even influence the genome. Nanoparticles are also able to affect expression levels of plant microRNAs. MicroRNAs are able to protect plants from biotic stress, including pathogens which cause powdery mildew. In this study, Hordeum vulgare L. varieties "Marthe" and "KWS Olof" were grown in hydroponics with magnetic iron oxide (Fe3O4) and copper oxide (CuO) NPs added at 17, 35, and 70 mg/L. Plant morphology, genotoxicity, and expression of miR156a were investigated. The Fe3O4 and CuO NPs demonstrated different effects on the barley varieties, namely, Fe3O4 nanoparticles increased plant shoot and root lengths and fresh biomass, while CuO nanoparticles decreased them. CuO NPs presence caused larger changes on barley genome compared to Fe3O4 NPs. Thus, Fe3O4 NPs reduced genome stability to 72% in the "Marthe" variety and to 76.34% in the "KWS Olof" variety, while CuO NPs reduced genome stability to 53.33% in "Marthe" variety and in the "KWS Olof" variety to 68.81%. The miR156a expression levels after Fe3O4 NPs treatment did not change in the "Marthe" variety, but increased in the "KWS Olof" variety, while CuO NPs treatment increased miRNA expression levels in the "Marthe" variety but decrease them in the "KWS Olof" variety. As NPs are able to influence miRNA expression and miRNAs can affect the plant resistance, obtained results suggest that tested NPs may alter plant resistance response to pathogens.

Co-administration of Selenium Nanoparticles and Metformin Abrogate Testicular Oxidative Injury by Suppressing Redox Imbalance, Augmenting Sperm Quality and Nrf2 Protein Expression in Streptozotocin-Induced Diabetic Rats

Selenium nanoparticles (SeNPs) and metformin (Met) elicit individually protective effects against testicular oxidative injury in diabetic rats. However, the combined effects of both compounds have not been investigated. We investigated the effects of SeNPs and Met individual/co-treatment on testicular oxidative injury in diabetic rats. Diabetes was induced by a single intraperitoneal administration of streptozotocin (STZ-40 mg/kg bwt). The rats were equally divided into 6 groups: Group one-non-diabetic; group two-diabetic untreated; and group six-non-diabetic received citrate buffer (2 mL/kg bwt), while group three, four, and five received SeNPs (0.1 mg/kg bwt), Met (50 mg/kg bwt), and SeNPs/Met combined respectively, for 42 days. Results revealed that SeNPs, as well as Met treatment significantly (p < 0.001), lowered blood glucose levels and improved relative organ weights in treated rats than those of the untreated group. Moreover, a synergistic effect was observed in the co-administration group. Additionally, combined treatment elicited better effect, in augmenting the pituitary and testicular hormone (LH, FSH, prolactin, and testosterone) levels, marker enzymes/protein associated with steroidogenesis (3-βHSD, 17-βHSD, and StAR protein), and sperm functional parameters than those of individual treatment groups, when compared with control. Furthermore, the combinatorial effects of SeNPs and Met surpassed their influence in attenuating testicular oxidative stress/inflammation and upregulation of Nrf2 protein expression in diabetic rats when compared with control. Overall, normal rats, co-treated with SeNPs and Met, did not reveal any deleterious effect. Therefore, SeNPs and Met combined treatment may better improve testes function in diabetic conditions than an individual regimen.

PlantCrystals-Nanosized Plant Material for Improved Bioefficacy of Medical Plants

PlantCrystals are obtained by milling plant material to sizes < 10 µm. Due to the disruption of the plant cells, active compounds are easily released, rendering the PlantCrystal technology an effective and low-cost process for the production of environmentally friendly plant extracts. The extracts can be used to produce phytomedicines, nutritional supplements or cosmetic products. Previous studies could already demonstrate the use of PlantCrystals to improve the antimicrobial or antifungal activity of different plants. This study investigated whether PlantCrystal technology is suitable to produce plant derived formulations with high antioxidant capacity. The study also aimed to identify the most suitable production methods for this. Methods: Various plant materials and parts of plants, i.e., seeds, leaves and flowers, and different methods were employed for the production. PlantCrystals were characterized regarding size, physical stability and antioxidant capacity (AOC). Results: PlantCrystals with particles < 1 µm were produced from the different plant materials. Both production methods, i.e., high-pressure homogenization, bead milling or the combination of both were suitable to obtain PlantCrystals. Nano milling of the plant material greatly affected their AOC and resulted in formulations with distinctly higher AOC when compared to classical extracts. Conclusions: Rendering plant material into small sized particles is highly effective to obtain plant extracts with high biological efficacy.

Flush with a flash: natural three-component antimicrobial combinations based on S-nitrosothiols, controlled superoxide formation and "domino" reactions leading to peroxynitrite

S-Nitrosothiols are ˙NO releasing agents renowned for vasodilatory and antioxidant properties. O2˙- promotes their decomposition, forming highly aggressive peroxynitrite ions (ONOO-). Since the production of O2˙- can be controlled by enzymes or by visible light, such otherwise harmless components can be turned into effective antimicrobial and nematicidal combinations with numerous potential applications in medicine.

Small Molecule Catalysts with Therapeutic Potential

Catalysts are employed in many areas of research and development where they combine high efficiency with often astonishing selectivity for their respective substrates. In biology, biocatalysts are omnipresent. Enzymes facilitate highly controlled, sophisticated cellular processes, such as metabolic conversions, sensing and signalling, and are prominent targets in drug development. In contrast, the therapeutic use of catalysts per se is still rather limited. Recent research has shown that small molecule catalytic agents able to modulate the redox state of the target cell bear considerable promise, particularly in the context of inflammatory and infectious diseases, stroke, ageing and even cancer. Rather than being "active" on their own in a more traditional sense, such agents develop their activity by initiating, promoting, enhancing or redirecting reactions between biomolecules already present in the cell, and their activity therefore depends critically on the predisposition of the target cell itself. Redox catalysts, for instance, preferably target cells with a distinct sensitivity towards changes in an already disturbed redox balance and/or increased levels of reactive oxygen species. Indeed, certain transition metal, chalcogen and quinone agents may activate an antioxidant response in normal cells whilst at the same time triggering apoptosis in cancer cells with a different pre-existing "biochemical redox signature" and closer to the internal redox threshold. In pharmacy, catalysts therefore stand out as promising lead structures, as sensor/effector agents which are highly effective, fairly selective, active in catalytic, i.e., often nanomolar concentrations and also very flexible in their structural design.