Microbial Life on the Surface of Microplastics in Natural Waters

Current scenario of emerging pollutants in farmlands and water reservoirs: Prospects and challenges

Globally, roughly more than 400 million metric tons of plastics are produced annually. Similarly, the pharmaceuticals business is rising exponentially yearly, 5.8 %. It is expected to increase from USD 714 billion to USD 1454 billion by 2029. Beyond their intended uses, these substances are released into the environment as contaminants due to improper usage and management practices. Therefore, pharmaceuticals and microplastics (MPs) are classified as emerging pollutants (EPs), and their existence in agricultural ecosystems adversely affects soil and environmental health, ultimately impacting both ecological and human well-being. Pharmaceuticals and MP-loaded organic amendments (especially manure) are a primary cause of emerging soil pollutants. The increasing application of treated wastewater or biosolids as irrigation water or soil conditioners, mainly when derived from untreated sewage sludge, can introduce pharmaceuticals and MPs into the farmlands, merging these pollutants within the soil medium. The co-occurrence of MPs and pharmaceuticals leads to prolonged environmental presence and gradual bioaccumulation in organisms over time, contributing to persistent contamination and long-lasting effects on ecosystems. Moreover, these EPs have the potential to alter the composition of soil biogeochemistry and disrupt overall soil health and productivity. Numerous methods have been developed to address this emerging issue, including electrochemical degradation, advanced oxidation processes, photocatalytic degradation, biosurfactants, micro- and nano-bubble systems, ultrasonic cavitation, nanotechnology, constructed wetlands, and many hybrid approaches. This review explores the extent of EPs, their interactions, and management strategies in EPs-contaminated environments.

Dissemination of antibiotic-resistant bacteria associated with microplastics collected from Monastir and Mahdia coasts (Tunisia)

The exponential use of plastics and their recalcitrant nature leads to their significant accumulation in the environment. The occurrence of plastic wastes is considered as a serious environmental problem. Additionally, plastic wastes can break down into smaller pieces called microplastics (MPs), leading to further interactions with the environment and living organisms. In this study, sixty-six strains were isolated from microplastic particles collected on different coastal areas of Monastir and Mahdia (Tunisia). The different bacterial isolates were identified according to some biochemical tests such as catalase, oxidase, and were subjected to molecular characterization. Amplification of the internal transcribed spacer (ITS) revealed the presence of 31 ITS haplotypes. The partial sequencing of the 16S ribosomal DNA of representative strains was analyzed. The majority of bacterial isolates (84.31 %) belonged to Gamma-proteobacteria (84.78 %), while the remaining isolates were affiliated to Firmicutes (15.21 %). The microplastic-associated bacterial isolates belonged to 10 genera, namely Acinetobacter, Pseudomonas, Bacillus, Staphylococcus, Shewanella, Aeromonas, Vibrio, Stutzerimonas, Exiguobacterium, Enterobacter. Among the well-represented Acinetobacter genus, the most common species identified was Acinetobacter johnsonii. Susceptibility patterns of these strains were studied against 21 antibiotics commonly used in Tunisia. A high level of antibiotic resistance was observed for Penicillin G (97.82 %) and Temocillin (86.95 %). S26 strain presented the highest multidrug resistance with a multiple antibiotic resistance (MAR) index of 0.71.

Effects of polystyrene microplastics on the growth and metabolism of highland barley seedlings based on LC-MS

Microplastics are widely present in the environment and can adversely affect plants. In this paper, the effects of different concentrations of microplastics on physiological indices and metabolites of highland barley were investigated for the first time using a metabolomics approach, and revealed the response mechanism of barley seedlings to polystyrene microplastics (PS-MPs) was revealed. The results showed that the aboveground biomass of highland barley exposed to low (10 mg/L) and medium (50 mg/L) concentrations of PS-MPs increased by 32.2% and 48.2%, respectively. The root length also increased by 16.4% and 21.6%, respectively. However, the aboveground biomass of highland barley exposed to high (100 mg/L) concentrations of PS-MPs decreased by 34.8%, leaf length by 20.7%, and root length by 25.9%. Microplastic exposure increased the levels of antioxidant activity, suggesting that highland barley responds to microplastic stress through oxidative stress. Metabolome analysis revealed that the contents of 4 metabolites increased significantly with increasing PS-MPs concentration in positive ionmode, while the contents of 8 metabolites increased significantly with increasing PS-MPs concentration in negative ionmode (P < 0.05), including prunin, dactylorhin E, and schisantherin B. Additionally, PS-MPs significantly interfered with highland barley flavonoid biosynthesis, pyrimidine metabolism, purine metabolism, fatty acid biosynthesis, and phenylpropanoid biosynthesis metabolic pathways. This study provides a new theoretical basis for a deeper understanding of the effects of different concentrations of PS-MPs on highland barley.

Carbon-Based Adsorbents for Microplastic Removal from Wastewater

Plastics are widely used across various industries due to their flexibility, cost-effectiveness, and durability. This extensive use has resulted in significant plastic pollution, with microplastics (MPs) becoming pervasive contaminants in water bodies worldwide, adversely affecting aquatic ecosystems and human health. This review explores the surface characteristics of carbon-based adsorbents, including biochar, activated carbon, carbon nanotubes (CNTs), and graphene, and their influence on MP removal efficiency. Key surface characteristics such as the carbon content, surface area, pore size, and particle size of adsorbents influenced adsorption efficiency. Additionally, hydrophobic interaction, van der Waals forces, π-π interactions and electrostatic interaction were found to be mechanisms by which microplastics are trapped onto adsorbents. Modified biochar and activated carbon demonstrated high adsorption efficiencies, while CNTs and graphene, with their high carbon contents and well-defined mesopores, showed outstanding performance in MP removal. Although a high surface area was generally associated with better adsorption performance, modifications significantly enhanced efficiency regardless of the initial surface area. This review emphasizes the importance of understanding the relationship between surface characteristics and adsorption efficiency to develop optimized adsorbents for MP removal from wastewater. However, challenges such as the lack of standardized testing methods, variability in biochar performance, and the high cost of regenerating carbon adsorbents remain. Future research should focus on developing cost-effective production methods, optimizing biochar production, and exploring advanced modifications to broaden the application of carbon adsorbents. Integrating advanced adsorbents into existing water treatment systems could further enhance MP removal efficiency. Addressing these challenges can improve the effectiveness and scalability of carbon-based adsorbents, significantly contributing to the mitigation of microplastic pollution in wastewater.

Profusion of microplastics in dental healthcare units; morphological, polymer, and seasonal trends with hazardous consequences for humans

Given the convenience of using plastics, addressing the growing concerns about their hazardous health effects is imperative. Consequently, a comprehensive risk assessment is necessary to gauge the potential harm microplastics pose. With its urgent call to action, this study aimed to investigate the indoor source and abundance of microplastics in private dental units during routine professional activities. The current analyzed microplastic quantity variations based on morphological characteristics, seasonal fluctuations and polymer-types. The polymer hazard index (PHI) was calculated to evaluate the significant human health risks posed to dental professionals by inhalation of microplastics. Dust samples were collected using a clean brush and steel pan from various flat and horizontal surfaces within each dental unit. The study found that clinical dental units had fewer microplastics (587 ± 184.9 MPs/g/day) than teaching hospitals (1083.80 ± 133.7MPs/g/day), with comparatively more abundance in winter (31 %). ATR-FTIR analysis determined polyethylene terephthalate to be a more abundant polymer (39 %). This study also found an average inhalation microplastic intake risk of 20.23 MP/g/day and 5259.85 MP/g/year for clinical and 29.45 MP/g/day and 765.12 MP/g/year for teaching hospital dental units. Female dental professionals have 1.1 times more microplastic inhalation risks than male dental professionals. According to PHI findings, overall minor to medium polymer risk was determined. In conclusion, this evidence-based research underscores the urgent need for a shift towards more sustainable practices in the dental healthcare sector. Dental professionals should prioritize using non-plastic material protective equipment and a proper ventilation system to reduce exposure to these particles.

Plastisphere in a low-pollution mountain river: Influence of microplastics on survival of pathogenic bacteria

Microplastics (MPs) are found even in remote and low-pollution freshwater ecosystems. However, the microbial communities associated with MPs in these environments remain poorly understood. We characterized the plastisphere in a low-pollution riverine ecosystem and evaluated the influence of different MPs in the persistence of pathogens in such environments. A mixture of MPs (MPs Mix) composed of polyethylene (PE), polypropylene (PP) and polyethylene terephthalate (PET), was submerged at three locations (L1, L2 and L3) in the river. For comparison purposes, water and sand communities were also analyzed. Our results revealed distinct bacterial communities on MPs compared to those in water or on the natural substrate (sand). However, the resemblance between the plastisphere and communities on natural particles was higher than what has been reported for polluted ecosystems. Although pathogens were predominantly enriched in the water, a few genera (e.g. Acinetobacter, Legionella and Mycobacterium) were enriched in the plastisphere. The abundance of antibiotic resistance genes did not differ significantly between water, sand, and MPs. The influence of different MPs (PE, PP, PET) on the persistence of antibiotic-resistant pathogens (i.e. cefotaxime-resistant Escherichia coli and meropenem-resistant Enterobacter kobei) in unpolluted water was assessed in microcosms. Significant differences were observed between the microcosms with MPs and those with natural particles (sand), after a 36-day exposure. A significantly higher persistence of the pathogens was registered in microcosms with PE and PET. Our results provide new insights into the plastisphere in non-pollution environments and demonstrate that even in these settings, MPs can facilitate the survival and dissemination of pathogens.

Selective colonization of microplastics, wood and glass by antimicrobial-resistant and pathogenic bacteria

The Plastisphere is a novel niche whereby microbial communities attach to plastic debris, including microplastics. These communities can be distinct from those found in the surrounding environment or those attached to natural substrates and may serve as a reservoir of both pathogenic and antimicrobial-resistant (AMR) bacteria. Owing to the frequent omission of appropriate comparator particles (e.g. natural substrates) in previous studies, there is a lack of empirical evidence supporting the unique risks posed by microplastics in terms of enrichment and spread of AMR pathogens. This study investigated selective colonization by a sewage community on environmentally sampled microplastics with three different polymers, sources and morphologies, alongside natural substrate (wood), inert substrate (glass) and free-living/planktonic community controls. Culture and molecular methods (quantitative polymerase chain reaction (qPCR)) were used to ascertain phenotypic and genotypic AMR prevalence, respectively, and multiplex colony PCR was used to identify extra-intestinal pathogenic Escherichia coli (ExPECs). From this, polystyrene and wood particles were found to significantly enrich AMR bacteria, whereas sewage-sourced bio-beads significantly enriched ExPECs. Polystyrene and wood were the least smooth particles, and so the importance of particle roughness on AMR prevalence was then directly investigated by comparing the colonization of virgin vs artificially weathered polyethylene particles. Surface weathering did not have a significant effect on the AMR prevalence of colonized particles. Our results suggest that the colonization of plastic and non-plastic particles by AMR and pathogenic bacteria may be enhanced by substrate-specific traits.

Effect of Biofouling on the Sorption of Organic Contaminants by Microplastics

Microplastics in the aquatic environment are susceptible to colonization by surrounding microorganisms, which form biofilms over the microplastic's surface. These biofilm-laden microplastics can then interact with a diverse array of contaminants. In the present study, biofilms were grown on microplastics in a laboratory setting using Pseudomonas aeruginosa as a model biofilm-forming bacterium for periods of 5 to 15 days. The sorption of three organic compounds representing different levels of hydrophobicity, namely methylene blue (MB), phenanthrol, and phenanthrene, was used to evaluate the effect of biofilm biomass on the adsorption of organic contaminants to microplastics. The sorption of MB and phenanthrol was found to increase with biofouling time, indicating affinity between these contaminants and the biofilm biomass on the particle. However, the presence of a biofilm did not influence the sorption of phenanthrene on the microplastics. These results suggest that the hydrophobicity of organic contaminants plays a major role in how biofouling of microplastics will influence contaminant sorption by microplastics. For some contaminants, biofilm can enhance the role of microplastics as contaminant vectors. These findings emphasize the need to understand the biomass load on environmental microplastics and the contaminants that associate with it for an accurate representation of the risk associated with microplastics in the environment. Environ Toxicol Chem 2024;43:1973-1981. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Biofilm of petroleum-based and bio-based microplastics in seawater in response to Zn(II): Biofilm formation, community structure, and microbial function

Microplastic biofilms are novel vectors for the transport and spread of pathogenic and drug-resistant bacteria. With the increasing use of bio-based plastics, there is an urgent need to investigate the microbial colonization characteristics of these materials in seawater, particularly in comparison with conventional petroleum-based plastics. Furthermore, the effect of co-occurring contaminants, such as heavy metals, on the formation of microplastic biofilms and bacterial communities remains unclear. In this study, we compared the biofilm bacterial community structure of petroleum-based polyethylene (PE) and bio-based polylactic acid (PLA) in seawater under the influence of zinc ions (Zn2+). Our findings indicate that the biofilm on PLA microplastics in the late stage was impeded by the formation of a mildly acidic microenvironment resulting from the hydrolysis of the ester group on PLA. The PE surface had higher bacterial abundance and diversity, with a more intricate symbiotic pattern. The bacterial structures on the two types of microplastics were different; PE was more conducive to the colonization of anaerobic bacteria, whereas PLA was more favorable for the colonization of aerobic and acid-tolerant species. Furthermore, Zn increased the proportion of the dominant genera that could utilize microplastics as a carbon source, such as Alcanivorax and Nitratireductor. PLA had a greater propensity to harbor and disseminate pathogenic and drug-resistant bacteria, and Zn promoted the enrichment and spread of harmful bacteria such as, Pseudomonas and Clostridioides. Therefore, further research is essential to fully understand the potential environmental effects of bio-based microplastics and the role of heavy metals in the dynamics of bacterial colonization.

Toxicity Risk Assessment Due to Particulate Matter Pollution from Regional Health Data: Case Study from Central Romania

Air pollution poses one of the greatest dangers to public well-being. This article outlines a study conducted in the Central Romania Region regarding the health risks associated with particulate matter (PM) of two sizes, viz., PM10 and PM2.5. The methodology used consists of the following: (i) an analysis of the effects of PM pollutants, (ii) an analysis of total mortality and cardiovascular-related mortality, and (iii) a general health risk assessment. The Central Region of Romania is situated in the Carpathian Mountains' inner arch (consisting of six counties). The total population of the region under investigation is about 2.6 million inhabitants. Health risk assessment is calculated based on the relative risk (RR) formula. During the study period, our simulations show that reducing these pollutants' concentrations below the new WHO guidelines (2021) will prevent over 172 total fatalities in Brasov alone, as an example. Furthermore, the potential benefit of reducing annual PM2.5 levels on total cardiovascular mortality is around 188 persons in Brasov. Although health benefits may also depend upon other physiological parameters, all general health indicators point towards a significant improvement in overall health by a general reduction in particulate matter, as is shown by the toxicity assessment of the particulate matter in the region of interest. The modality can be applied to other locations for similar studies.

Microplastics in the insular marine environment of the Southwest Indian Ocean carry a microbiome including antimicrobial resistant (AMR) bacteria: A case study from Reunion Island

The increasing threats to ecosystems and humans from marine plastic pollution require a comprehensive assessment. We present a plastisphere case study from Reunion Island, a remote oceanic island located in the Southwest Indian Ocean, polluted by plastics. We characterized the plastic pollution on the island's coastal waters, described the associated microbiome, explored viable bacterial flora and the presence of antimicrobial resistant (AMR) bacteria. Reunion Island faces plastic pollution with up to 10,000 items/km2 in coastal water. These plastics host microbiomes dominated by Proteobacteria (80 %), including dominant genera such as Psychrobacter, Photobacterium, Pseudoalteromonas and Vibrio. Culturable microbiomes reach 107 CFU/g of microplastics, with dominance of Exiguobacterium and Pseudomonas. Plastics also carry AMR bacteria including β-lactam resistance. Thus, Southwest Indian Ocean islands are facing serious plastic pollution. This pollution requires vigilant monitoring as it harbors a plastisphere including AMR, that threatens pristine ecosystems and potentially human health through the marine food chain.

Characteristics and removal efficiency of microplastics at secondary wastewater treatment plant in Lithuania

Wastewater treatment plants (WWTPs) are the most significant barrier between anthropogenic microplastics and environmental ecosystems. The distribution and characteristics of microplastics in WWTPs remain uncertain and incompletely understood, particularly in northeastern Europe (Baltic States), where there is a lack of data on microplastic pollution and distribution. This study presents the removal efficiency and variation in characteristics of microplastics in different stages of the secondary WWTP during a 3-month sampling campaign in Lithuania. The abundance, size, shape, color, and chemical composition of microplastics in the wastewater at different treatment stages were thoroughly examined, in a size range from 20 to 1000 μm. On average, 2962 ± 25 particles/L of microplastic enter the studied WWTP. The obtained microplastic removal efficiency was 55.4% ± 3.9%, highlighting the necessity to enhance wastewater treatment strategies focusing on microplastic removal. Fragment-type microplastics smaller than 100 μm were removed from wastewater samples with the highest removal efficiency. Furthermore, our study includes recommendations to improve microplastic removal efficiency and contribute to mitigating microplastic pollution. PRACTITIONER POINTS: A large number of MPs in the size range of 20-1000 μm enter Lithuanian WWTP. Small-sized MPs within a range of 20-50 μm and 50-100 μm were removed with the highest efficiency of 54.07 ± 1.68% and 56.4 ± 2.43%, respectively. The shape and size of MPs have a major impact on the efficiency of their removal. Future research should prioritize the development of economical and energy-efficient systems, specifically designed for the removal of MPs in WWTPs.

The bioaccessibility of adsorped heavy metals on biofilm-coated microplastics and their implication for the progression of neurodegenerative diseases

Microplastic (MP) tiny fragments (< 5 mm) of conventional and specialized industrial polymers are persistent and ubiquitous in both aquatic and terrestrial ecosystem. Breathing, ingestion, consumption of food stuffs, potable water, and skin are possible routes of MP exposure that pose potential human health risk. Various microorganisms including bacteria, cyanobacteria, and microalgae rapidly colonized on MP surfaces which initiate biofilm formation. It gradually changed the MP surface chemistry and polymer properties that attract environmental metals. Physicochemical and environmental parameters like polymer type, dissolved organic matter (DOM), pH, salinity, ion concentrations, and microbial community compositions regulate metal adsorption on MP biofilm surface. A set of highly conserved proteins tightly regulates metal uptake, subcellular distribution, storage, and transport to maintain cellular homeostasis. Exposure of metal-MP biofilm can disrupt that cellular homeostasis to induce toxicities. Imbalances in metal concentrations therefore led to neuronal network dysfunction, ROS, mitochondrial damage in diseases like Alzheimer's disease (AD), Parkinson's disease (PD), and Prion disorder. This review focuses on the biofilm development on MP surfaces, factors controlling the growth of MP biofilm which triggered metal accumulation to induce neurotoxicological consequences in human body and stategies to reestablish the homeostasis. Thus, the present study gives a new approach on the health risks of heavy metals associated with MP biofilm in which biofilms trigger metal accumulation and MPs serve as a vector for those accumulated metals causing metal dysbiosis in human body.

A critical review of environmental factors influencing the transport dynamics of microplastics in riverine systems: implications for ecological studies

Microplastics (MPs) in rivers present an ecological risk. In this paper, we review hydro-geomorphological, biological, and allochthonous factors that may influence the distribution and transport of MPs in riverine systems. We also review MPs characteristics that may impact their distribution and transport. At the reach scale, hydraulic biotopes and their key features such as flow velocity, bed roughness, depth, and channel morphology are important features that shape the distribution and transport of MPs in riverine systems and should be considered in the design of MPs studies. Microbial-MPs interaction may impact MPs density, aggregation and thus transport dynamics. Instream vegetation may act as a physical trap of MPs, which may impact their horizontal transport and aggregation. Lateral transport of MPs is impacted mostly by precipitation, run-off, point and non-point discharges. The polymer density, size and shapes of MPs are critical factors that influence their transport dynamics in riverine systems. Microplastic sampling protocols should be designed to reflect hydro-geomorphological considerations. The unique interaction of MPs physical characteristics and hydraulic biotopes creates differential exposure of riverine organisms to MPs and should be used to unravel potential impacts. Biomonitoring studies should integrate the complex MPs-hydraulic interaction for ecologically meaningful investigation into organismal exposure to MPs in their preferred biotopes. Overall, our review indicates the influences of hydro-geomorphological features on the transport dynamics of MPs and their ecological significance for the study of MPs in rivers.

Microbiological safety and quality of ceviche, poke, and sushi dishes sold at retail outlets in Orange County, CA

Raw, ready-to-eat (RTE) seafood products, such as ceviche, poke, and sushi, have experienced growing demand globally; however, these products have the potential to be contaminated with foodborne pathogens. The objective of this study was to determine the prevalence of Escherichiacoli/coliforms, Salmonella, and Listeria in ceviche, poke, and sushi dishes sold at the retail level in Orange County, CA, USA. Additional organisms detected during testing were also considered in the results. A total of 105 raw, RTE samples of ceviche, poke, and sushi were collected from restaurants and grocery stores in Orange County, CA. Samples were tested for Salmonella and Listeria utilizing methods from the Food and Drug Administration (FDA) Bacteriological Analytical Manual (BAM). E. coli and total coliforms were enumerated utilizing 3 M Petrifilm plates. Overall, two samples (1.9%) were positive for generic E. coli, with a range of 5-35 CFU/g. Coliforms were detected in 85 samples (81%), with a range of 5-1710 CFU/g. The average coliform levels in ceviche samples (259 CFU/g) were significantly higher than the levels in sushi samples (95 CFU/g), according to a Kruskal-Wallis H test followed by the Dunn test (p < 0.05). The coliform levels in poke samples (196 CFU/g) were not significantly different from those in ceviche or sushi. All levels of E. coli and coliforms were considered acceptable or satisfactory/borderline according to standards for RTE seafood. None of the samples tested positive for Salmonella or Listeria monocytogenes; however, other microorganisms were detected in 17 samples, including Listeria spp., Proteus mirabilis, Providencia rettgeri, and Morganella morganii. The results of this study are novel in that they present data on the microbiological safety and quality of ceviche, poke, and sushi dishes sold at retail in the United States, as well as provide a comparison across the three categories of raw, RTE seafood.

Stimuli-Activable Metal-Bearing Nanomaterials and Precise On-Demand Antibacterial Strategies

Bacterial infections remain the leading cause of death worldwide today. The emergence of antibiotic resistance has urged the development of alternative antibacterial technologies to complement or replace traditional antibiotic treatments. In this regard, metal nanomaterials have attracted great attention for their controllable antibacterial functions that are less prone to resistance. This review discusses a particular family of stimuli-activable metal-bearing nanomaterials (denoted as SAMNs) and the associated on-demand antibacterial strategies. The various SAMN-enabled antibacterial strategies stem from basic light and magnet activation, with the addition of bacterial microenvironment responsiveness and/or bacteria-targeting selectivity and therefore offer higher spatiotemporal controllability. The discussion focuses on nanomaterial design principles, antibacterial mechanisms, and antibacterial performance, as well as emerging applications that desire on-demand and selective activation (i.e., medical antibacterial treatments, surface anti-biofilm, water disinfection, and wearable antibacterial materials). The review concludes with the authors' perspectives on the challenges and future directions for developing industrial translatable next-generation antibacterial strategies.

Microbial community shifts induced by plastic and zinc as substitutes of tire abrasion

Aquatic environments serve as a sink for anthropogenic discharges. A significant part of the discharge is tire wear, which is increasingly being released into the environment, causing environmental disasters due to their longevity and the large number of pollutants they contain. Main components of tires are plastic and zinc, which therefore can be used as substitutes for tire abrasion to study the effect on microbial life. We investigate environmentally realistic concentrations of plastic and zinc on a freshwater microeukaryotic community using high-throughput sequencing of the 18S V9 region over a 14-day exposure period. Apart from a generally unchanged diversity upon exposure to zinc and nanoplastics, a change in community structure due to zinc is evident, but not due to nanoplastics. Evidently, nanoplastic particles hardly affect the community, but zinc exposure results in drastic functional abundance shifts concerning the trophic mode. Phototrophic microorganisms were almost completely diminished initially, but photosynthesis recovered. However, the dominant taxa performing photosynthesis changed from bacillariophytes to chlorophytes. While phototrophic organisms are decreasing in the presence of zinc, the mixotrophic fraction initially benefitted and the heterotrophic fraction were benefitting throughout the exposure period. In contrast to lasting changes in taxon composition, the functional community composition is initially strongly imbalanced after application of zinc but returns to the original state.

Bacterial biofilms on medical masks disposed in the marine environment: a hotspot of biological and functional diversity

The present paper was aimed at investigating the role of disposable medical masks as a substrate for microbial biofilm growth and for the selection of specific microbial traits in highly impacted marine environments. In this view, we have immerged masks in a coastal area affected by a continuous input of artisanal fishery wastes and hydrocarbons pollution caused by intense maritime traffic. Masks maintained one month in the field were colonized by a bacterial community significantly different from that detected in the natural matrices from the same areas (seawater and sediments). The masks served as a viable substrate for the growth and enrichment of phototrophic microorganisms (Oxyphotobacteria), as well as Ruminococcaceae, Gracilibacteria, and Holophageae. In a follow-up investigation, masks previously colonized in the field were transferred in lab-scale microcosms which were supplemented with hydrocarbons and which contained also a piece of a virgin mask. After one month, a shift in the community composition, likely triggered by hydrocarbons addition, was observed in the previously colonized mask, with signatures characteristic of hydrocarbon-degrading microbial groups. Such hydrocarbon-degrading bacteria were also found to colonize the virgin mask. Remarkably, SEM micrographs provided indications of the occurrence of morphological modifications of the surface components of the virgin masks colonized by hydrocarbonoclastic bacteria. Overall, for the first time, we have demonstrated the potential risk for human and animal health determined by the uncorrected disposal of masks which are suitable substrates for pathogens colonization, permanence and spreading. Moreover, we have herein strengthened the knowledge on the role of hydrocarbon-degrading bacteria in the colonization and modification of fossil-based plastics in marine environment.

Microorganisms as New Sources of Energy

The use of fossil energy sources has a negative impact on the economic and socio-political stability of specific regions and countries, causing environmental changes due to the emission of greenhouse gases. Moreover, the stocks of mineral energy are limited, causing the demand for new types and forms of energy. Biomass is a renewable energy source and represents an alternative to fossil energy sources. Microorganisms produce energy from the substrate and biomass, i.e., from substances in the microenvironment, to maintain their metabolism and life. However, specialized microorganisms also produce specific metabolites under almost abiotic circumstances that often do not have the immediate task of sustaining their own lives. This paper presents the action of biogenic and biogenic–thermogenic microorganisms, which produce methane, alcohols, lipids, triglycerides, and hydrogen, thus often creating renewable energy from waste biomass. Furthermore, some microorganisms acquire new or improved properties through genetic interventions for producing significant amounts of energy. In this way, they clean the environment and can consume greenhouse gases. Particularly suitable are blue-green algae or cyanobacteria but also some otherwise pathogenic microorganisms (E. coli, Klebsiella, and others), as well as many other specialized microorganisms that show an incredible ability to adapt. Microorganisms can change the current paradigm, energy–environment, and open up countless opportunities for producing new energy sources, especially hydrogen, which is an ideal energy source for all systems (biological, physical, technological). Developing such energy production technologies can significantly change the already achieved critical level of greenhouse gases that significantly affect the climate.

Plastic Interactions with Pollutants and Consequences to Aquatic Ecosystems: What We Know and What We Do Not Know

Plastics are a group of synthetic materials made of organic polymers and some additives with special characteristics. Plastics have become part of our daily life due to their many applications and uses. However, inappropriately managed plastic waste has raised concern regarding their ecotoxicological and human health risks in the long term. Due to the non-biodegradable nature of plastics, their waste may take several thousands of years to partially degrade in natural environments. Plastic fragments/particles can be very minute in size and are mistaken easily for prey or food by aquatic organisms (e.g., invertebrates, fishes). The surface properties of plastic particles, including large surface area, functional groups, surface topography, point zero charge, influence the sorption of various contaminants, including heavy metals, oil spills, PAHs, PCBs and DDT. Despite the fact that the number of studies on the biological effects of plastic particles on biota and humans has been increasing in recent years, studies on mixtures of plastics and other chemical contaminants in the aquatic environment are still limited. This review aims to gather information about the main characteristics of plastic particles that allow different types of contaminants to adsorb on their surfaces, the consequences of this adsorption, and the interactions of plastic particles with aquatic biota. Additionally, some missing links and potential solutions are presented to boost more research on this topic and achieve a holistic view on the effects of micro- and nanoplastics to biological systems in aquatic environments. It is urgent to implement measures to deal with plastic pollution that include improving waste management, monitoring key plastic particles, their hotspots, and developing their assessment techniques, using alternative products, determining concentrations of micro- and nanoplastics and the contaminants in freshwater and marine food-species consumed by humans, applying clean-up and remediation strategies, and biodegradation strategies.

The role of microplastics biofilm in accumulation of trace metals in aquatic environments

Microplastics are one of the major contaminants of aquatic nature where they can interact with organic and inorganic pollutants, including trace metals, and adsorb them. At the same time, after the microplastics have entered the aquatic environments, they are quickly covered with a biofilm - microorganisms which are able to produce extracellular polymeric substances (EPS) that can facilitate sorption of trace metals from surrounding water. The microbial community of biofilm contains bacteria which synthesizes EPS with antimicrobial activity making them more competitive than other microbial inhabitants. The trace metal trapping by bacterial EPS can inhibit the development of certain microorganisms, therefore, a single microparticle participates in complex interactions of the diverse elements surrounding it. The presented review aims to consider the variety of interactions associated with the adsorption of trace metal ions on the surface of microplastics covered with biofilm, the fate of such microplastics and the ever-increasing risk to the environment caused by the combination of these large-scale pollutants - microplastics and trace metals. Since aquatic pollution problems affect the entire planet, strict regulation of the production, use, and disposal of plastic materials is needed to mitigate the effects of this emerging pollutant and its complexes could have on the environment and human health.