Airborne Aerosols and Human Health: Leapfrogging from Mass Concentration to Oxidative Potential

Development and performance evaluation of online monitors for near real-time measurement of total and water-soluble organic carbon in fine and coarse ambient PM

In this study, we developed two online monitors for total organic carbon (TOC) and water-soluble organic carbon (WSOC) measurements in fine (dp < 2.5μm) and coarse (2.5μm < dp < 10μm) particulate matter (PM), respectively. Their performance has been evaluated in laboratory and field tests to demonstrate the feasibility of using these monitors to measure near real-time concentrations, with consideration of their potential for being employed in long-term measurements. The fine PM collection setup was equipped with a versatile aerosol concentration enrichment system (VACES) connected to an aerosol-into-liquid-sampler (AILS), whereas two virtual impactors (VIs) in tandem with a modified BioSampler were used to collect coarse PM. These particle collection setups were in tandem with a Sievers M9 TOC analyzer to read TOC and WSOC concentrations in aqueous samples hourly. The average hourly TOC concentration measured by our developed monitors in fine and coarse PM were 5.17 ± 2.41 and 0.92 ± 0.29 μg/m3, respectively. In addition, our TOC readings showed good agreement and were comparable with those quantified using Sunset Lab EC/OC analyzer operating in parallel as a reference. Furthermore, we conducted field tests to produce diurnal profiles of fine PM-bound WSOC, which can show the effects of ambient temperature on maximum values in the nighttime chemistry of the winter, as well as on increased photochemical activities in afternoon peaks during the summer. According to our experimental campaign, WSOC mean values during the study period (3.07 μg/m3 for the winter and 2.7 μg/m3 for the summer) were in a comparable range with those of earlier studies in Los Angeles. Overall, our results corroborate the performance of our developed monitors in near real-time measurements of TOC and WSOC, which can be employed for future source apportionment studies in Los Angeles and other areas, aiding in understanding the health impacts of different pollution sources.

In-vivo exposure of a plant model organism for the assessment of the ability of PM samples to induce oxidative stress

This study aims to propose an innovative, simple, rapid, and cost-effective method to study oxidative stress induced by PM through in-vivo exposure of the plant model organism Arabidopsis thaliana. A. thaliana seedlings were exposed to urban dust certified for its elemental content and to PM2.5 samples collected in an urban-industrial area of Northern Italy. An innovative technique for the detachment and suspension in water of the whole intact dust from membrane filters was applied to expose the model organism to both the soluble and insoluble fractions of PM2.5, which were analyzed for 34 elements by ICP-MS. Oxidative stress induced by PM on A. thaliana was assessed by light microscopic localization and UV-Vis spectrophotometric determination of superoxide anion (O2-) content on the exposed seedlings by using the nitro blue tetrazole (NBT) assay. The results showed a good efficiency and sensitivity of the method for PM mass concentrations >20 μg m-3 and an increase in O2- content in all exposed seedlings, which mainly depends on the concentration, chemical composition, and sources of the PM administered to the model organism. Particles released by biomass burning appeared to contribute more to the overall toxicity of PM. This method was found to be cost-effective and easy to apply to PM collected on membrane filters in intensive monitoring campaigns in order to obtain valuable information on the ability of PM to generate oxidative stress in living organisms.

Exposure to urban nanoparticles at low PM[Formula: see text] concentrations as a source of oxidative stress and inflammation

Exposures to fine particulate matter (PM[Formula: see text]) have been associated with health impacts, but the understanding of the PM[Formula: see text] concentration-response (PM[Formula: see text]-CR) relationships, especially at low PM[Formula: see text], remains incomplete. Here, we present novel data using a methodology to mimic lung exposure to ambient air (2[Formula: see text] 60 [Formula: see text]g m[Formula: see text]), with minimized sampling artifacts for nanoparticles. A reference model (Air Liquid Interface cultures of human bronchial epithelial cells, BEAS-2B) was used for aerosol exposure. Non-linearities observed in PM[Formula: see text]-CR curves are interpreted as a result of the interplay between the aerosol total oxidative potential (OP[Formula: see text]) and its distribution across particle size (d[Formula: see text]). A d[Formula: see text]-dependent condensation sink (CS) is assessed together with the distribution with d[Formula: see text] of reactive species . Urban ambient aerosol high in OP[Formula: see text], as indicated by the DTT assay, with (possibly copper-containing) nanoparticles, shows higher pro-inflammatory and oxidative responses, this occurring at lower PM[Formula: see text] concentrations (< 5 [Formula: see text]g m[Formula: see text]). Among the implications of this work, there are recommendations for global efforts to go toward the refinement of actual air quality standards with metrics considering the distribution of OP[Formula: see text] with d[Formula: see text] also at relatively low PM[Formula: see text].

Sensitivity of PM10 oxidative potential to aerosol chemical composition at a Mediterranean urban site: ascorbic acid versus dithiothreitol measurements

The oxidative potential (OP) of PM10 daily samples collected at a traffic site in southeastern Spain during summer and winter was assessed by two acellular assays: the ascorbic acid (AA) and dithiothreitol (DTT) methods. Although PM10 levels were similar during both periods, OP values (expressed in nmol min-1 m-3) showed a defined seasonal trend. The AA activity was higher in summer than in winter, whereas the DTT reactivity exhibited an opposite seasonal pattern. Both assays were sensitive to different PM10 components, as shown by the results of the linear correlation analysis. Moreover, the relationship between OP values and PM10 chemical species was not the same during summer and winter, indicating that particle toxicity is associated with different sources during the warm and cold seasons. When OP values were expressed on a mass basis (nmol min-1 µg-1), lower correlation coefficients with PM10 chemical species were generally obtained compared to volume-normalized activities. These outcomes suggest that only some specific components have a significant intrinsic oxidative potential.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11869-023-01332-1.

The oxidative potential of airborne particulate matter in two urban areas of Chile: More than meets the eye

Oxidative potential (OP) has gained attention as a parameter that can reveal the ability of different properties of particulate matter (PM) to generate reactive oxygen species (ROS) as one single value. Moreover, OP is also believed to be a predictor of toxicity and hence the health effects of PM. This study evaluated the OP of PM₁₀, PM_2.5,and PM_1.0samples using dithiothreitol assays in two cities of Chile (Santiago and Chillán). The results showed that the OP was different between cities, PM size fractions, and seasons. Additionally, OP was strongly correlated with certain metals and meteorological variables. Higher mass-normalized OP was observed during cold periods in Chillán and warm periods in Santiago and was associated with PM_2.5 and PM₁. On the other hand, volume-normalized OP was higher during winter in both cities and for PM₁₀. Additionally, we compared the OP values to the Air Quality Index (AQI) scale and found cases of days that were classified as having "good" air quality (supposed to be less harmful to health) showing extremely high OP values that were similar to those on days that were classified as "unhealthy". Based on these results,we suggest using the OP as a complementary measure to the PM mass concentration because it includes important new information related to PM properties and compositions that could help improvecurrent air quality management tools.

Seasonal and Spatial Variations of the Oxidative Properties of Ambient PM2.5 in the Po Valley, Italy, before and during COVID-19 Lockdown Restrictions

This study describes the chemical and toxicological characteristics of fine particulate matter (PM_2.5) in the Po Valley, one of the largest and most polluted areas in Europe. The investigated samples were collected in the metropolitan area of Milan during the epidemic lockdown and their toxicity was evaluated by the oxidative potential (OP), measured using ascorbic acid (OP^AA) and dithiothreitol (OP^DTT) acellular assays. The study was also extended to PM_2.5 samples collected at different sites in the Po Valley in 2019, to represent the baseline conditions in the area. Univariate correlations were applied to the whole dataset to link the OP responses with the concentrations of the major chemical markers of vehicular and biomass burning emissions. Of the two assays, OP^AA was found mainly sensitive towards transition metals released from vehicular traffic, while OP^DTT towards the PM carbonaceous components. The impact of the controlling lockdown restrictions on PM_2.5 oxidative properties was estimated by comparing the OP values in corresponding time spans in 2020 and 2019. We found that during the full lockdown the OP^AA values decreased to 80-86% with respect to the OP data in other urban sites in the area, while the OP^DTT values remained nearly constant.

Polycyclic aromatic hydrocarbons and their oxygenated derivatives in urban aerosol: levels, chemical profiles, and contribution to PM2.5 oxidative potential

The concentrations of polycyclic aromatic hydrocarbons (PAHs) and quinones, a subgroup of oxygenated PAHs (oxy-PAHs), were measured in PM_2.5 samples collected during warm (May-June 2019) and cold (February-March 2020) seasons in the city of Bologna, Italy. Total PAHs concentration was nearly double in winter (6.58 ± 1.03 ng m^-3) compared with spring (3.16 ± 0.53 ng m^-3), following the trend of the PM_2.5 mass concentration. Molecular diagnostic ratios suggested that, together with traffic, biomass burning was the dominant emission source contributing to the peaks of concentration of PM_2.5 registered in the cold season. Quinone level was constant in both seasons, being 1.44 ± 0.24 ng m^-3, that may be related to the increased secondary formation during warm season, as confirmed by the higher Σoxy-PAHs/ΣPAHs ratio in spring than in winter. The oxidative potential (OP) of the PM_2.5 samples was assessed using acellular dithiothreitol (DTT) and ascorbic acid (AA) assays. The obtained responses showed a strong seasonality, with higher volume-normalized (OP_V) values in winter than in spring, i.e., OP_V^DTT: 0.32 ± 0.15 nmol min^-1 m^-3 vs. 0.08 ± 0.03 nmol min^-1 m^-3 and OP_V^AA: 0.72 ± 0.36 nmol min^-1 m^-3 vs. 0.28 ± 0.21 nmol min^-1 m^-3. Both OP_V^DTT and OP_V^AA responses were significantly associated with total PAHs, as a general descriptor of redox-active PAH derivatives, associated with co-emission from burning sources or secondary atmospheric oxidation of parent PAHs. Otherwise, only winter OP_V^DTT responses showed a significant correlation with total Ʃoxy-PAHs concentration.

Seasonal and Spatial Variations of PM10 and PM2.5 Oxidative Potential in Five Urban and Rural Sites across Lombardia Region, Italy

Oxidative potential (OP) of particulate matter (PM) is gaining strong interest as a promising health exposure metric. This study investigated OP of a large set of PM₁₀ and PM_2.5 samples collected at five urban and background sites near Milan (Italy), one of the largest and most polluted urban areas in Europe, afflicted with high particle levels. OP responses from two acellular assays, based on ascorbic acid (AA) and dithiothreitol (DTT), were combined with atmospheric detailed composition to examine any possible feature in OP with PM size fraction, spatial and seasonal variations. A general association of volume-normalized OP with PM mass was found; this association may be related to the clear seasonality observed, whereby there was higher OP activity in wintertime at all investigated sites. Univariate correlations were used to link OP with the concentrations of the major chemical markers of vehicular and biomass burning emissions. Of the two assays, AA was particularly sensitive towards transition metals in coarse particles released from vehicular traffic. The results obtained confirm that the responses from the two assays and their relationship with atmospheric pollutants are assay- and location-dependent, and that their combination is therefore helpful to singling out the PM redox-active compounds driving its oxidative properties.

A review of secondary organic aerosols formation focusing on organosulfates and organic nitrates

Secondary organic aerosols (SOA) are crucial constitution of fine particulate matter (PM), which are mainly derived from photochemical oxidation products of primary organic matter and volatile organic compounds (VOCs), and can induce terrible impacts to human health, air quality and climate change. As we know, organosulfates (OSs) and organic nitrates (ON) are important contributors for SOA formation, which could be possibly produced through various pathways, resulting in extremely complex formation mechanism of SOA. Although plenty of research has been focused on the origins, spatial distribution and formation mechanisms of SOA, a comprehensive and systematic understanding of SOA formation in the atmosphere remains to be detailed explored, especially the most important OSs and ON dedications. Thus, in this review, we systematically summarize the recent research about origins and formation mechanisms of OSs and ON, and especially focus on their contribution to SOA, so as to have a clearer understanding of the origin, spatial distribution and formation principle of SOA. Importantly, we interpret the complex interaction with coexistence effect of SO_x and NO_x on SOA formation, and emphasize the future insights for SOA research to expect a more comprehensive theory and practice to alleviate SOA burden.

On the Redox-Activity and Health-Effects of Atmospheric Primary and Secondary Aerosol: Phenomenology

The RHAPS (Redox-Activity And Health-Effects Of Atmospheric Primary And Secondary Aerosol) project was launched in 2019 with the major objective of identifying specific properties of the fine atmospheric aerosol from combustion sources that are responsible for toxicological effects and can be used as new metrics for health-related outdoor pollution studies. In this paper, we present the overall methodology of RHAPS and introduce the phenomenology and the first data observed. A comprehensive physico-chemical aerosol characterization has been achieved by means of high-time resolution measurements (e.g., number size distributions, refractory chemical components, elemental composition) and low-time resolution analyses (e.g., oxidative potential, toxicological assays, chemical composition). Preliminary results indicate that, at the real atmospheric conditions observed (i.e., daily PM1 from less than 4 to more than 50 μg m−3), high/low mass concentrations of PM1, as well as black carbon (BC) and water soluble Oxidative Potential (WSOP,) do not necessarily translate into high/low toxicity. Notably, these findings were observed during a variety of atmospheric conditions and aerosol properties and with different toxicological assessments. Findings suggest a higher complexity in the relations observed between atmospheric aerosol and toxicological endpoints that go beyond the currently used PM1 metrics. Finally, we provide an outlook to companion papers where data will be analyzed in more detail, with the focus on source apportionment of PM1 and the role of source emissions on aerosol toxicity, the OP as a predictive variable for PM1 toxicity, and the related role of SOA possessing redox-active capacity, exposure-response relationships for PM1, and air quality models to forecast PM1 toxicity.

Synergistic and Antagonistic Effects of Aerosol Components on Its Oxidative Potential as Predictor of Particle Toxicity

Quantifying the component-specific contribution to the oxidative potential (OP) of ambient particle matter (PM) is the key information to properly representing its acute health hazards. In this study, we investigated the interactions between the major contributors to OP, i.e., transition metals and quinones, to highlight the relative effects of these species to the total OP. Several synergistic and antagonistic interactions were found that significantly change the redox properties of their binary mixtures, increasing or decreasing the values computed by a simple additive model. Such results from the standard solutions were confirmed by extending the study to atmospheric PM_2.5 samples collected in winter in the Lombardia region, a hot spot for air pollution in northern Italy. This work highlights that a solid estimation of oxidative properties of ambient PM requires an interaction-based approach accounting for the interaction effects between metals and quinones.

Oxidative potential of solvent-extractable organic matter of ambient total suspended particulate in Bangkok, Thailand

Oxidative stress is a key mechanism by which ambient particulate matter induces adverse health effects. Most studies have focused on the oxidative potential (OP) of water-soluble constituents, while there has been limited work on the OP of solvent-extractable organic matter (EOM OP). In this study, the EOM OP of ambient total suspended particulate (TSP) from Bangkok, Thailand, was determined using the dithiothreitol (DTT) assay. Positive matrix factorization (PMF), combined with chemical analysis of molecular markers, was employed to apportion the contributions of various emission sources to EOM OP. The volume-normalized OP initially increased with organic carbon (OC) concentration and plateaued gradually, while the mass-normalized OP fitted well with OC concentration using a power function. Fossil fuel combustion (62%) and plastic waste burning (23%) were the major contributors to EOM OP, while biomass burning demonstrated only a limited contribution. EOM OP correlated well with each group of polycyclic aromatic hydrocarbons (PAHs), suggesting that secondary formation of quinones associated with fossil fuel combustion and plastic waste burning could be an important pathway of TSP toxicity. This study underscores the importance of considering different emission sources when evaluating potential health impacts and the implementation of air pollution regulations.

A New Method for the Assessment of the Oxidative Potential of Both Water-Soluble and Insoluble PM

Water-soluble and insoluble fractions of airborne particulate matter (PM) exhibit different toxicological potentials and peculiar mechanisms of action in biological systems. However, most of the research on the oxidative potential (OP) of PM is focused exclusively on its water-soluble fraction, since experimental criticisms were encountered for detaching the whole PM (soluble and insoluble species) from field filters. However, to estimate the actual potential effects of PM on human health, it is essential to assess the OP of both its water-soluble and insoluble fractions. In this study, to estimate the total OP (TOP), an efficient method for the detachment of intact PM10 from field filters by using an electrical toothbrush was applied to 20 PM10 filters in order to obtain PM10 water suspensions to be used for the DCFH, AA and DTT oxidative potential assays (OPDCFH, OPAA and OPDTT). The contribution of the insoluble PM10 to the TOP was evaluated by comparing the TOP values to those obtained by applying the three OP assays to the water-soluble fraction of 20 equivalent PM10 filters. The OP of the insoluble fraction (IOP) was calculated as the difference between the TOP and the WSOP. Moreover, each PM10 sample was analyzed for the water-soluble and insoluble fractions of 10 elements (Al, Cr, Cs, Cu, Fe, Li, Ni, Rb, Sb, Sn) identified as primary elemental tracers of the main emission sources in the study area. A principal component analysis (PCA) was performed on the data obtained to identify the predominant sources for the determination of TOP, WSOP, and IOP. Results showed that water-soluble PM10 released by traffic, steel plant, and biomass burning is mainly responsible for the generation of the TOP as well as of the WSOP. This evidence gave strength to the reliability of the results from OP assays performed only on the water-soluble fraction of PM. Lastly, the IOPDCFH and IOPDTT were found to be principally determined by insoluble PM10 from mineral dust.

An Aerosol Extinction Coefficient Retrieval Method and Characteristics Analysis of Landscape Images

Images based on RGB pixel values were used to measure the extinction coefficient of aerosols suspended in an atmospheric state. The pixel values of the object-image depend on the target-object reflection ratio, reflection direction, object type, distances, illumination intensity, atmospheric particle extinction coefficient, and scattering angle between the sun and the optical axes of the camera, among others. Therefore, the imaged intensity cannot directly provide information on the aerosol concentration or aerosol extinction coefficient. This study proposes simple methods to solve this problem, which yield reasonable extinction coefficients at the three effective RGB wavelengths. Aerosol size information was analogized using the RGB Ångström exponent measured at the three wavelengths for clean, dusty, rainy, Asian dust storm, and foggy days. Additionally, long-term measurements over four months showed reasonable values compared with existing PM_2.5 measurements and the proposed method yields useful results.

On the Water-Soluble Organic Matter in Inhalable Air Particles: Why Should Outdoor Experience Motivate Indoor Studies?

The current understanding of water-soluble organic aerosol (OA) composition, sources, transformations, and effects is still limited to outdoor scenarios. However, the OA is also an important component of particulate matter indoors, whose complexity impairs a full structural and molecular identification. The current limited knowledge on indoor OA, and particularly on its water-soluble organic matter (WSOM) fraction is the basis of this feature paper. Inspired by studies on outdoor OA, this paper discusses and prioritizes issues related to indoor water-soluble OA and their effects on human health, providing a basis for future research in the field. The following three main topics are addressed: (1) what is known about the origin, mass contribution, and health effects of WSOM in outdoor air particles; (2) the current state-of-the-art on the WSOM in indoor air particles, the main challenges and opportunities for its chemical characterization and cytotoxicity evaluation; and (3) why the aerosol WSOM should be considered in future indoor air quality studies. While challenging, studies on the WSOM fraction in air particles are highly necessary to fully understand its origin, fate, toxicity, and long-term risks indoors.

Association of Sulfur, Transition Metals, and the Oxidative Potential of Outdoor PM2.5 with Acute Cardiovascular Events: A Case-Crossover Study of Canadian Adults

BACKGROUND

We do not currently understand how spatiotemporal variations in the composition of fine particulate air pollution [fine particulate matter with aerodynamic diameter ≤2.5μm (PM2.5)] affects population health risks. However, recent evidence suggests that joint concentrations of transition metals and sulfate may influence the oxidative potential (OP) of PM2.5 and associated health impacts.

OBJECTIVES

The purpose of the study was to evaluate how combinations of transition metals/OP and sulfur content in outdoor PM2.5 influence associations with acute cardiovascular events.

METHODS

We conducted a national case-crossover study of outdoor PM2.5 and acute cardiovascular events in Canada between 2016 and 2017 (93,344 adult cases). Monthly mean transition metal and sulfur (S) concentrations in PM2.5 were determined prospectively along with estimates of OP using acellular assays for glutathione (OPGSH), ascorbate (OPAA), and dithiothreitol depletion (OPDTT). Conditional logistic regression models were used to estimate odds ratios (OR) [95% confidence intervals (CI)] for PM2.5 across strata of transition metals/OP and sulfur.

RESULTS

Among men, the magnitudes of observed associations were strongest when both transition metal and sulfur content were elevated. For example, an OR of 1.078 (95% CI: 1.049, 1.108) (per 10μg/m3) was observed for cardiovascular events in men when both copper and S were above the median, whereas a weaker association was observed when both elements were below median values (OR=1.019, 95% CI: 1.007, 1.031). A similar pattern was observed for OP metrics. PM2.5 was not associated with acute cardiovascular events in women.

DISCUSSION

The combined transition metal and sulfur content of outdoor PM2.5 influences the strength of association with acute cardiovascular events in men. Regions with elevated concentrations of both sulfur and transition metals in PM2.5 should be examined as priority areas for regulatory interventions. https://doi.org/10.1289/EHP9449.

Particulate PAH Transport Associated with Adult Chronic Cough Occurrence Closely Connected with Meteorological Conditions: A Modelling Study

Exposure to polycyclic aromatic hydrocarbons (PAHs) are a cause of chronic cough occurrence in adult patients. In order to clear the relationship between transboundary transport of PAH and health effects, this study investigates the relationship between atmospheric particulate PAHs (p-PAHs), cough occurrence by epidemiological research, and meteorological conditions using a chemical transport model. Source receptor relationship (SRR) analysis revealed that a higher cough occurrence was caused by exposure to high p-PAH levels in air masses transported from central China (CCHN, 30–40° N) under westerly conditions. The p-PAHs transported from northern China (NCHN, >40° N) and the eastern part of Russia (ERUS) under north-westerly conditions also contributed to cough occurrence. The low equivalent potential temperature (ePT) and geopotential height anomaly suggested that the p-PAHs emitted near the surface were suppressed to upward transport under the colder air mass but were instead transported horizontally near the surface in the boundary layer, resulting in high p-PAH concentrations arriving in Kanazawa. Our study’s findings suggest that the air mass transport pattern associated with meteorology strongly influences the high p-PAH concentrations causing adult chronic cough occurrence.

The Role of Fossil Fuel Combustion Metals in PM2.5 Air Pollution Health Associations

In this review, we elucidate the central role played by fossil fuel combustion in the health-related effects that have been associated with inhalation of ambient fine particulate matter (PM2.5). We especially focus on individual properties and concentrations of metals commonly found in PM air pollution, as well as their sources and their adverse health effects, based on both epidemiologic and toxicological evidence. It is known that transition metals, such as Ni, V, Fe, and Cu, are highly capable of participating in redox reactions that produce oxidative stress. Therefore, particles that are enriched, per unit mass, in these metals, such as those from fossil fuel combustion, can have greater potential to produce health effects than other ambient particulate matter. Moreover, fossil fuel combustion particles also contain varying amounts of sulfur, and the acidic nature of the resulting sulfur compounds in particulate matter (e.g., as ammonium sulfate, ammonium bisulfate, or sulfuric acid) makes transition metals in particles more bioavailable, greatly enhancing the potential of fossil fuel combustion PM2.5 to cause oxidative stress and systemic health effects in the human body. In general, there is a need to further recognize particulate matter air pollution mass as a complex source-driven mixture, in order to more effectively quantify and regulate particle air pollution exposure health risks.

Simulation of the transition metal-based cumulative oxidative potential in East Asia and its emission sources in Japan

The aerosol oxidative potential (OP) is considered to better represent the acute health hazards of aerosols than the mass concentration of fine particulate matter (PM_2.5). The proposed major contributors to OP are water soluble transition metals and organic compounds, but the relative magnitudes of these compounds to the total OP are not yet fully understood. In this study, as the first step toward the numerical prediction of OP, the cumulative OP (OP_tm*) based on the top five key transition metals, namely, Cu, Mn, Fe, V, and Ni, was defined. The solubilities of metals were assumed constant over time and space based on measurements. Then, the feasibility of its prediction was verified by comparing OP_tm* values based on simulated metals to that based on observed metals in East Asia. PM_2.5 typically consists of primary and secondary species, while OP_tm* only represents primary species. This disparity caused differences in the domestic contributions of PM_2.5 and OP_tm*, especially in large cities in western Japan. The annual mean domestic contributions of PM_2.5 were 40%, while those of OP_tm* ranged from 50 to 55%. Sector contributions to the OP_tm* emissions in Japan were also assessed. The main important sectors were the road brake and iron-steel industry sectors, followed by power plants, road exhaust, and railways.

Seasonal Variations in the Chemical Composition of Indoor and Outdoor PM10 in University Classrooms

In the VIEPI project (Integrated evaluation of the exposure to indoor particulate matter) framework, we carried out a 1-year study of the concentration and chemical composition of particulate matter (PM) in a 5 story building in the Sapienza University of Rome (Italy). Each sampling had a duration of 1 month and was carried out indoors and outdoors in six classrooms. The chemical analyses were grouped to obtain information about the main PM sources. Micro-elements in their soluble and insoluble fractions were used to trace additional sources. Indoor PM composition was dominated by soil components and, to a lesser extent, by the organics, which substantially increased when people crowded the sites. The penetration of PM components was regulated by their chemical nature and by the dimensions of the particles in which they were contained. For the first time in crowded indoor environments, three different chemical assays aimed to determine PM redox properties complemented chemical composition measurements. These preliminary tests showed that substantially different redox properties characterised atmospheric particles in indoor and outdoor sites. The innovative characteristics of this study (time duration, number of considered environments) were essential to obtain relevant information about PM composition and sources in indoor academic environments and the occupants’ role.

Oxidative Potential Induced by Ambient Particulate Matters with Acellular Assays: A Review

Acellular assays of oxidative potential (OP) induced by ambient particulate matters (PMs) are of great significance in screening for toxicity in PMs. In this review, several typical OP measurement techniques, including the respiratory tract lining fluid assay (RTLF), ascorbate depletion assay (AA), dithiothreitol assay (DTT), chemiluminescent reductive acridinium triggering (CRAT), dichlorofluorescin assay (DCFH) and electron paramagnetic/spin resonance assay (EPR/ESR) are discussed and their sensitivity to different PMs species composition, PMs size distribution and seasonality is compared. By comparison, the DTT assay tends to be the preferred method providing a more comprehensive measurement with transition metals and quinones accumulated in the fine PMs fraction. Specific transition metals (i.e., Mn, Cu, Fe) and quinones are found to contribute OPDTT directly whereas the redox properties of PMs species may be changed by the interactions between themselves. The selection of the appropriate OP measurement methods and the accurate analysis of the relationship between the methods and PM components is conducive to epidemiological researches which are related with oxidative stress induced by PMs exposure.