The Impact of Russia-Ukraine geopolitical conflict on the air quality and toxicological properties of ambient PM2.5 in Milan, Italy

The geopolitical conflict between Russia and Ukraine has disrupted Europe's natural gas supplies, driving up gas prices and leading to a shift towards biomass for residential heating during colder months. This study assessed the consequent air quality and toxicological impacts in Milan, Italy, focusing on fine particulate matter (PM2.5, dp < 2.5 μm) emissions. PM2.5 samples were analyzed for their chemical composition and assessed for their oxidative potential using the dithiothreitol (DTT) assay across three periods reflecting residential heating deployment (RHD): pre-RHD, intra-RHD, and post-RHD periods. During the intra-RHD period, PM2.5 levels were significantly higher than those in other periods, with concentrations reaching 57.94 ± 7.57 μg/m3, indicating a deterioration in air quality. Moreover, levoglucosan was 9.2 times higher during the intra-RHD period compared to the pre-RHD period, correlating with elevated levels of elemental carbon (EC) and polycyclic aromatic hydrocarbons (PAHs). These findings were compared with previous local studies before the conflict, underscoring a significant rise in biomass-related emissions. DTT assay levels during the intra-RHD were 2.1 times higher than those observed during the same period in 2022, strongly correlating with biomass burning emissions. Our findings highlight the necessity for policies to mitigate the indirect health effects of increased biomass burning emissions due to the energy crisis triggered by the geopolitical conflict.

Development and performance evaluation of online monitors for near real-time measurement of total and water-soluble organic carbon in fine and coarse ambient PM

In this study, we developed two online monitors for total organic carbon (TOC) and water-soluble organic carbon (WSOC) measurements in fine (dp < 2.5μm) and coarse (2.5μm < dp < 10μm) particulate matter (PM), respectively. Their performance has been evaluated in laboratory and field tests to demonstrate the feasibility of using these monitors to measure near real-time concentrations, with consideration of their potential for being employed in long-term measurements. The fine PM collection setup was equipped with a versatile aerosol concentration enrichment system (VACES) connected to an aerosol-into-liquid-sampler (AILS), whereas two virtual impactors (VIs) in tandem with a modified BioSampler were used to collect coarse PM. These particle collection setups were in tandem with a Sievers M9 TOC analyzer to read TOC and WSOC concentrations in aqueous samples hourly. The average hourly TOC concentration measured by our developed monitors in fine and coarse PM were 5.17 ± 2.41 and 0.92 ± 0.29 μg/m3, respectively. In addition, our TOC readings showed good agreement and were comparable with those quantified using Sunset Lab EC/OC analyzer operating in parallel as a reference. Furthermore, we conducted field tests to produce diurnal profiles of fine PM-bound WSOC, which can show the effects of ambient temperature on maximum values in the nighttime chemistry of the winter, as well as on increased photochemical activities in afternoon peaks during the summer. According to our experimental campaign, WSOC mean values during the study period (3.07 μg/m3 for the winter and 2.7 μg/m3 for the summer) were in a comparable range with those of earlier studies in Los Angeles. Overall, our results corroborate the performance of our developed monitors in near real-time measurements of TOC and WSOC, which can be employed for future source apportionment studies in Los Angeles and other areas, aiding in understanding the health impacts of different pollution sources.

Identifying urban emission sources and their contribution to the oxidative potential of fine particulate matter (PM2.5) in Kuwait

In this study, we investigated the seasonal variations, chemical composition, sources, and oxidative potential of ambient PM2.5 (particles with a diameter of less than 2.5 μm) in Kuwait City. The sampling campaign was conducted within the premises of Kuwait Institute for Scientific Research from June 2022 to May 2023, covering different seasons throughout the year. The personal cascade impactor sampler (PCIS) operated at flow rate of 9 L/min was employed to collect weekly PM2.5 samples on PTFE and quarts filters. These collected samples were analyzed for carbonaceous species (i.e., elemental and organic carbon), metals and transition elements, inorganic ions, and DTT (dithiothreitol) redox activity. Furthermore, principal component analysis (PCA) and multi-linear regression (MLR) were used to identify the predominant emission sources and their percentage contribution to the redox activity of PM2.5 in Kuwait. The results of this study highlighted that the annual-averaged ambient PM2.5 mass concentrations in Kuwait (59.9 μg/m3) substantially exceeded the World Health Organization (WHO) guideline of 10 μg/m3. Additionally, the summer season displayed the highest PM2.5 mass concentration (75.2 μg/m3) compared to other seasons, primarily due to frequent dust events exacerbated by high-speed winds. The PCA identified four primary PM2.5 sources: mineral dust, fossil fuel combustion, road traffic, and secondary aerosols. The mineral dust was found to be the predominant source, contributing 36.1% to the PM2.5 mass, followed by fossil fuel combustion and traffic emissions with contributions of 23.7% and 20.3%, respectively. The findings of MLR revealed that road traffic was the most significant contributor to PM2.5 oxidative potential, accounting for 47% of the total DTT activity. In conclusion, this comprehensive investigation provides essential insights into the sources and health implications of PM2.5 in Kuwait, underscoring the critical need for effective air quality management strategies to mitigate the impacts of particulate pollution in the region.

Los Angeles Basin's air quality transformation: a long-term investigation on the impacts of PM regulations on the trends of ultrafine particles and co-pollutants

This study investigates the long-term trends of ambient ultrafine particles (UFPs) and associated airborne pollutants in the Los Angeles Basin from 2007 to 2022, focusing on the indirect effects of regulations on UFP levels. The particle number concentration (PNC) of UFPs was compiled from previous studies in the area, and associated co-pollutant data, including nitrogen oxides (NOx), carbon monoxide (CO), elemental carbon (EC), organic carbon (OC), and ozone (O3), were obtained from the chemical speciation network (CSN) database. Over the study period, a general decrease was noted in the PNC of UFPs, NOx, EC, and OC, except for CO, the concentration trends of which did not exhibit a consistent pattern. UFPs, NOx, EC, and OC were positively correlated, while O3 had a negative correlation, especially with NOx. Our analysis discerned two distinct subperiods in pollutant trends: 2007-2015 and 2016-2022. For example, there was an overall decrease in the PNC of UFPs at an annual rate of -850.09 particles/cm3/year. This rate was more pronounced during the first sub-period (2007-2015) at -1814.9 particles/cm3/year and then slowed to -227.21 particles/cm3/year in the second sub-period (2016-2023). The first sub-period (2007-2015) significantly influenced pollutant level changes, exhibiting more pronounced and statistically significant changes than the second sub-period (2016-2022). Since 2016, almost all primary pollutants have stabilized, indicating a reduced impact of current regulations, and emphasizing the need for stricter standards. In addition, the study included an analysis of Vehicle Miles Traveled (VMT) trends from 2007 to 2022 within the Los Angeles Basin. Despite the general increase in VMT, current regulations and cleaner technologies seem to have successfully mitigated the potential increase in increase in PNC. Overall, while a decline in UFPs and co-pollutant levels was observed, the apparent stabilization of these levels underscores the need for more stringent regulatory measures and advanced emission standards.

Size-segregated source identification of water-soluble and water-insoluble metals and trace elements of coarse and fine PM in central Los Angeles

In this study, the water-solubility and sources of metals and trace elements in both fine and coarse particulate matter (PM) were investigated in Central Los Angeles. Sampling was performed in the winter, spring, and summer of 2022 at the Particle Instrumentation Unit (PIU) of the University of Southern California located in the proximity of I-110 freeway. Both fine and coarse PM samples were collected using Personal Cascade Impactors (PCIS) and chemically analyzed to determine their water-soluble and water-insoluble metal content. Principal Component Analysis (PCA) and Multiple Linear Regression (MLR) were used to determine the sources of soluble and insoluble metals and obtain their contributions to total metal concentration. Our results indicate that the water-solubility of most of the metals is higher in the fine size fraction compared to the coarse fraction. Seasonal variations in the water solubility of selected metals for both coarse and fine fractions were observed, with higher water-soluble metal concentrations in summer for several species (e.g., Fe , S, Pb, Cu, La, Ni, and Al ), possibly due to higher photochemical processing, while in winter, almost all species exhibited higher insoluble fraction concentrations. The PCA and MLR analyses results showed that tire and brake wear was the most significant contributor to the total metals for both fine soluble and insoluble portions, accounting for 35% and 75% of the total metals, respectively. Combustion sources also contributed substantially to water-soluble metals for fine and coarse size ranges, representing 40% and 32% of the total metal mass, respectively. In addition, mineral dust and soil and re-suspended dust were identified as the highest contributors to coarse metals. The MLR analysis also revealed that secondary aerosols contributed 11% to the fine water-soluble metals. Our results suggest that non-tailpipe emissions significantly contribute to both coarse and fine PM metals in the Central Los Angeles region.

Design, optimization, and evaluation of a wet electrostatic precipitator (ESP) for aerosol collection

In this study, we developed, optimized, and evaluated in lab and field experiments a wet electrostatic precipitator (ESP) for the collection of ambient PM_2.5 (particulate matter with aerodynamic diameter < 2.5 μm) into ultrapure water by applying an electrostatic charge to the particles. We operated the wet ESP at different flow rates and voltages to identify the optimal operating conditions. According to our experimental measurements, a flow rate of 125 lpm and an applied positive voltage of 11 kV resulted in a lower ozone generation of 133 ppb and a particle collection efficiency exceeding 80-90% in all size ranges. For the field tests, the wet ESP was compared with the versatile aerosol concentration enrichment system (VACES) connected to a BioSampler, a PTFE filter sampler, and an OC/EC analyzer (Sunset Laboratory Inc., USA) as a reference. The chemical analysis results indicated the wet ESP concentrations of metal and trace elements were in very good agreement with those measured by the VACES/BioSampler and PTFE filter sampler. Moreover, our results showed comparable total organic carbon (TOC) concentrations measured by the wet ESP, BioSampler, and OC/EC analyzer, while somewhat lower TOC concentrations were measured by the PTFE filter sampler, possibly due to the limitations of extracting water-insoluble organic carbon (WIOC) from a dry substrate in the latter sampler. The comparable TOC content in the wet ESP and BioSampler samples differs from previous findings that showed higher TOC content in BioSampler samples compared to those collected by dry ESP. The results of the Dithiothreitol (DTT) assay showed comparable DTT activity in the VACES/BioSampler and wet ESP PM samples while slightly lower in the PTFE filter samples. Overall, our results suggest that the wet ESP could be a promising alternative to other conventional sampling methods.

Development and performance evaluation of a two-stage cascade impactor equipped with gelatin filter substrates for the collection of multi-sized particulate matter

This study presents the development and evaluation of a high flow rate gelatin cascade impactor (GCI) to collect different PM particle sizes on water-soluble gelatin substrates. The GCI operates at a flow rate of 100 lpm, and consists of two impaction stages, followed by a filter holder to separate particles in the following diameter ranges: >2.5 μm, 0.2-2.5 μm, and <0.2 μm. Laboratory characterization of the GCI performance was conducted using monodisperse polystyrene latex (PSL) particles as well as polydisperse ammonium sulfate, sodium chloride, and ammonium nitrate aerosols to obtain the particle collection efficiency curves for both impaction stages. In addition to the laboratory characterization, we performed concurrent field experiments to collect PM2.5 employing both GCI equipped with gelatin filter and personal cascade impactor sampler (PCIS) equipped with PTFE filter for further toxicological analysis using macrophage-based reactive oxygen species (ROS) and dithiothreitol consumption (DTT) assays. Our results showed that the experimentally determined cut-point diameters for the first and second impaction stages were 2.4 μm and 0.21 μm, respectively, which agreed with the theoretical predictions. Although the GCI has been developed primarily to collect particles on gelatin filters, the use of a different type of substrate (i.e., quartz) led to similar particle separation characteristics. The findings of the field tests demonstrated the advantage of using the GCI in toxicological studies due to its ability to collect considerable PM-toxic constituents, as corroborated by the DTT and ROS values for the GCI-collected particles which were 26.44 nmoles/min/mg PM and 8813.2 μg Zymosan Units/mg PM, respectively. These redox activity values were more than twice those of particles collected concurrently on PTFE filter using the PCIS. This high-flow-rate impactor can collect considerable amounts of size-fractionated PM on water-soluble filters (i.e., gelatin), which can completely dissolve in water allowing for the extraction of soluble and insoluble PM species for further toxicological analysis.

Investigation of organic carbon profiles and sources of coarse PM in Los Angeles

Source apportionment analyses are essential tools to determine sources of ambient coarse particles (2.5 <d_p < 10 μm) and to disentangle their association and contribution from other pollutants, particularly PM_2.5 (<2.5 μm). A semi-continuous sampling campaign was conducted using two virtual impactors/concentrators to enhance coarse particulate matter concentrations coupled with an online thermal-optical EC/OC monitor to quantify coarse PM-bound organic carbon volatility fractions (OC₁-OC₄) in central Los Angeles during the winter, spring, and summer of 2021. The total OC and its volatility fraction concentrations, meteorological parameters (i.e., wind speeds and relative humidity), vehicle miles traveled (VMT), and gaseous source tracers (i.e., O₃ and NO₂) were used as inputs to positive matrix factorization (PMF) model. A 3-factor solution identified vehicular emissions (accounting for 46% in the cold phase and 26% in the warm phase of total coarse OC concentrations), secondary organic carbon (27% and 37%), and re-suspended dust (27% and 37%) as the primary organic carbon sources of coarse PM. The re-suspended dust factor showed a higher contribution of more volatile organic carbons (i.e., OC₁ up to 77%) due to their re-distribution on dust particles, whereas the SOA factor was the dominant contributor to less volatile organic aerosols (i.e., OC₄ up to 54%), which are the product of reactions at high relative humidity (RH). Our findings revealed that the total OC concentrations in the coarse size range were comparable with those of previous studies in the area, underscoring the challenges in curtailing coarse PM-bound OC sources and the necessity of developing effective emission control regulations on coarse PM. The results from the current study provide insights into the seasonal and temporal variation of total OC and its volatility fractions in Los Angeles.

The Role of Portable Air Purifiers and Effective Ventilation in Improving Indoor Air Quality in University Classrooms

In this study we investigated the effectiveness of air purifiers and in-line filters in ventilation systems working simultaneously inside various classrooms at the University of Southern California (USC) main campus. We conducted real-time measurements of particle mass (PM), particle number (PN), and carbon dioxide (CO₂) concentrations in nine classrooms from September 2021 to January 2022. The measurement campaign was carried out with different configurations of the purifier (i.e., different flow rates) while the ventilation system was continuously working. Our results showed that the ventilation systems in the classrooms were adequate in providing sufficient outdoor air to dilute indoor CO₂ concentrations due to the high air exchange rates (2.63-8.63 h^-1). The particle penetration coefficients (P) of the investigated classrooms were very low for PM (<0.2) and PN (<0.1), with the exception of one classroom, corroborating the effectiveness of in-line filters in the ventilation systems. Additionally, the results showed that the efficiency of the air purifier exceeded 95% in capturing ultrafine and coarse particles and ranged between 82-88% for particles in the accumulation range (0.3-2 µm). The findings of this study underline the effectiveness of air purifiers and ventilation systems equipped with efficient in-line filters in substantially reducing indoor air pollution.

Real-time measurements of mineral dust concentration in coarse particulate matter (PM10-2.5) by employing a novel optical-based technique in Los Angeles

As a primary component of coarse particulate matter (PM), ambient mineral dust has been linked to adverse health effects. Los Angeles, the largest metropolitan urban area of the United States, is impacted by both windblown and localized sources of mineral dust, often internally mixed with black carbon. The estimation of mineral dust concentrations with a high time resolution becomes critical in improving our understanding of its sources and temporal trends. Using Aethalometers combined with a high-volume virtual impactor (VI) to enrich coarse (2.5 <dp < 10 μm) particles, the light absorption and mass concentration of mineral dust were estimated in real-time during summer, fall, and winter over 2020-2021. The concentration-enriched coarse PM was collected on Teflon filters, and its chemical composition in terms of trace elements and metals was chemically quantified. The high time-resolution measurements enabled us to calculate the absorption coefficient of enriched dust particles by subtracting the light absorption of the post-VI coarse PM from that of the PM_2.5 aerosol fraction to reduce the impact of stronger light absorbers in ambient PM. Mineral dust was more prevalent during the fall and winter campaigns (i.e., 19.3 and 11.4 μg/m³, respectively), lower concentrations were observed during the summer campaign (i.e., 8.50 μg/m³). The calculated absorption Ångström exponent (AAE) was 2.18, highlighting the presence of dust particles during the sampling period. The dust mass absorption coefficient was estimated to be 2.7 ± 1.6 Mm^-1 at 370 nm and 0.41 ± 0.16 Mm^-1 at 880 nm wavelengths, respectively. The validation of the proposed approach was investigated by comparing the evaluated mineral dust mass concentrations in this study with the reported coarse PM concentrations by the California Air Resources Board (CARB). The results reported by the optical-based approach with high temporal resolution can provide crucial information on identifying sources of mineral dust in urban areas.