Arming Technology in Yeast-Novel Strategy for Whole-cell Biocatalyst and Protein Engineering

Surface Engineering of Escherichia coli to Display Its Phytase (AppA) and Functional Analysis of Enzyme Activities

Escherichia coli phytase (AppA) is widely used as an exogenous enzyme in monogastric animal feed mainly because of its ability to degrade phytic acid or its salt (phytate), a natural source of phosphorus. Currently, successful recombinant production of soluble AppA has been achieved by gene overexpression using both bacterial and yeast systems. However, some methods for the biomembrane immobilization of phytases (including AppA), such as surface display on yeast cells and bacterial spores, have been investigated to avoid expensive enzyme purification processes. This study explored a homologous protein production approach for displaying AppA on the cell surface of E. coli by engineering its outer membrane (OM) for extracellular expression. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of total bacterial lysates and immunofluorescence microscopy of non-permeabilized cells revealed protein expression, whereas activity assays using whole cells or OM fractions indicated functional enzyme display, as evidenced by consistent hydrolytic rates on typical substrates (i.e., p-nitrophenyl phosphate and phytic acid). Furthermore, the in vitro results obtained using a simple method to simulate the gastrointestinal tract of poultry suggest that the whole-cell biocatalyst has potential as a feed additive. Overall, our findings support the notion that biomembrane-immobilized enzymes are reliable for the hydrolysis of poorly digestible substrates relevant to animal nutrition.

Recent advances in metabolic engineering of microorganisms for advancing lignocellulose-derived biofuels

Combating climate change and ensuring energy supply to a rapidly growing global population has highlighted the need to replace petroleum fuels with clean, and sustainable renewable fuels. Biofuels offer a solution to safeguard energy security with reduced ecological footprint and process economics. Over the past years, lignocellulosic biomass has become the most preferred raw material for the production of biofuels, such as fuel, alcohol, biodiesel, and biohydrogen. However, the cost-effective conversion of lignocellulose into biofuels remains an unsolved challenge at the industrial scale. Recently, intensive efforts have been made in lignocellulose feedstock and microbial engineering to address this problem. By improving the biological pathways leading to the polysaccharide, lignin, and lipid biosynthesis, limited success has been achieved, and still needs to improve sustainable biofuel production. Impressive success is being achieved by the retouring metabolic pathways of different microbial hosts. Several robust phenotypes, mostly from bacteria and yeast domains, have been successfully constructed with improved substrate spectrum, product yield and sturdiness against hydrolysate toxins. Cyanobacteria is also being explored for metabolic advancement in recent years, however, it also remained underdeveloped to generate commercialized biofuels. The bacterium Escherichia coli and yeast Saccharomyces cerevisiae strains are also being engineered to have cell surfaces displaying hydrolytic enzymes, which holds much promise for near-term scale-up and biorefinery use. Looking forward, future advances to achieve economically feasible production of lignocellulosic-based biofuels with special focus on designing more efficient metabolic pathways coupled with screening, and engineering of novel enzymes.

Simultaneous Display of Multiple Kinds of Enzymes on the Yeast Cell Surface for Multistep Reactions

The yeast surface display system is a valuable platform for constructing cells with novel functions for various applications and high-throughput screening of protein or peptide libraries containing random mutations. Among the host microorganisms used for surface display, yeast is the most suitable microorganism for surface engineering owing to its eukaryotic features. In yeast, proper folding and glycosylation of expressed eukaryotic proteins can be performed. Furthermore, in this system, multiple kinds of proteins can be simultaneously displayed on the cell surface. This allows for a synergistic effect between the displayed enzymes, leading to an efficient multistep reaction. Alternatively, the ratio of the enzymes to be displayed can be controlled by the co-culture of surface-engineered yeasts displaying a single kind of enzyme. Therefore, yeast surface display systems have been applied to the construction of various whole-cell biocatalysts. Here, we describe methods for the simultaneous display of multiple kinds of proteins on the yeast cell surface.

Expression cassette and plasmid construction for Yeast Surface Display in Saccharomyces cerevisiae

OBJECTIVES

Develop a Cell Surface Display system in Saccharomyces cerevisiae, based on the construction of an expression cassette for pYES2 plasmid.

RESULTS

The construction of an expression cassette containing the α-factor signal peptide and the C-terminal portion of the α-agglutinin protein was made and its sequence inserted into a plasmid named pYES2/gDαAgglutinin. The construction allows surface display of bovine herpesvirus type 5 (BoHV-5) glycoprotein D (gD) on S. cerevisiae BY4741 strain. Recombinant protein expression was confirmed by dot blot, and indirect immunofluorescence using monoclonal anti-histidine antibodies and polyclonal antibodies from mice experimentally vaccinated with a recombinant gD.

CONCLUSIONS

These results demonstrate that the approach and plasmid used represent not only an effective system for immobilizing proteins on the yeast cell surface, as well as a platform for immunobiologicals development.

Engineering bioscaffolds for enzyme assembly

With the demand for green, safe, and continuous biocatalysis, bioscaffolds, compared with synthetic scaffolds, have become a desirable candidate for constructing enzyme assemblages because of their biocompatibility and regenerability. Biocompatibility makes bioscaffolds more suitable for safe and green production, especially in food processing, production of bioactive agents, and diagnosis. The regenerability can enable the engineered biocatalysts regenerate through simple self-proliferation without complex re-modification, which is attractive for continuous biocatalytic processes. In view of the unique biocompatibility and regenerability of bioscaffolds, they can be classified into non-living (polysaccharide, nucleic acid, and protein) and living (virus, bacteria, fungi, spore, and biofilm) bioscaffolds, which can fully satisfy these two unique properties, respectively. Enzymes assembled onto non-living bioscaffolds are based on single or complex components, while enzymes assembled onto living bioscaffolds are based on living bodies. In terms of their unique biocompatibility and regenerability, this review mainly covers the current advances in the research and application of non-living and living bioscaffolds with focus on engineering strategies for enzyme assembly. Finally, the future development of bioscaffolds for enzyme assembly is also discussed. Hopefully, this review will attract the interest of researchers in various fields and empower the development of biocatalysis, biomedicine, environmental remediation, therapy, and diagnosis.

Surface Display Technology for Biosensor Applications: A Review

Surface display is a recombinant technology that expresses target proteins on cell membranes and can be applied to almost all types of biological entities from viruses to mammalian cells. This technique has been used for various biotechnical and biomedical applications such as drug screening, biocatalysts, library screening, quantitative assays, and biosensors. In this review, the use of surface display technology in biosensor applications is discussed. In detail, phage display, bacterial surface display of Gram-negative and Gram-positive bacteria, and eukaryotic yeast cell surface display systems are presented. The review describes the advantages of surface display systems for biosensor applications and summarizes the applications of surface displays to biosensors.

Construction of engineered yeast producing ammonia from glutamine and soybean residues (okara)

Ammonia is an essential substance for agriculture and the chemical industry. The intracellular production of ammonia in yeast (Saccharomyces cerevisiae) by metabolic engineering is difficult because yeast strongly assimilates ammonia, and the knockout of genes enabling this assimilation is lethal. Therefore, we attempted to produce ammonia outside the yeast cells by displaying a glutaminase (YbaS) from Escherichia coli on the yeast cell surface. YbaS-displaying yeast successfully produced 3.34 g/L ammonia from 32.6 g/L glutamine (83.2% conversion rate), providing it at a higher yield than in previous studies. Next, using YbaS-displaying yeast, we also succeeded in producing ammonia from glutamine in soybean residues (okara) produced as food waste from tofu production. Therefore, ammonia production outside cells by displaying ammonia-lyase on the cell surface is a promising strategy for producing ammonia from food waste as a novel energy resource, thereby preventing food loss.

Yeast Surface Display System for Facilitated Production and Application of Phage Endolysin

Bacteriophage endolysin is one of the potential alternatives of conventional antibiotics, but the intrinsic limitations of the bacterial expression system may undermine the comprehensive application of this therapeutic protein. To circumvent such limitations, we adopted a yeast surface display system as a novel expression platform for endolysin. Endolysin LysSA11 from staphylococcal phage SA11 was expressed and surface-displayed in Saccharomyces cerevisiae to exhibit sufficient antimicrobial activity against Staphylococcus aureus. Without any protein isolation or purification procedures, we showed that direct treatment of LysSA11-displaying yeast cells could accomplish a 5-log reduction of viable Staphylococcus aureus within 3 h. Furthermore, the surface-displayed LysSA11 exhibited superior stability over the soluble form of purified LysSA11 during 14 days of storage in a refrigerated environment. We suggest that the yeast surface display system is an efficient, stable, and straightforward platform for the production and antibacterial applications of endolysin.

Cell surface display of proteins on filamentous fungi

Protein display approaches have been useful to endow the cell surface of yeasts with new catalytic activities so that they can act as enhanced whole-cell biocatalysts. Despite their biotechnological potential, protein display technologies remain poorly developed for filamentous fungi. The lignocellulolytic character of some of them coupled to the cell surface biosynthesis of valuable molecules by a single or a cascade of several displayed enzymes is an appealing prospect. Cell surface protein display consists in the co-translational fusion of a functional protein (passenger) to an anchor one, usually a cell-wall-resident protein. The abundance, spacing, and local environment of the displayed enzymes-determined by the relationship of the anchor protein with the structure and dynamics of the engineered cell wall-are factors that influence the performance of display-based biocatalysts. The development of protein display strategies in filamentous fungi could be based on the field advances in yeasts; however, the unique composition, structure, and biology of filamentous fungi cell walls require the customization of the approach to those microorganisms. In this prospective review, the cellular bases, the design principles, and the available tools to foster the development of cell surface protein display technologies in filamentous fungi are discussed.

Enhanced Biosorption of Nickel Ions on Immobilized Surface-Engineered Yeast Using Nickel-Binding Peptides

Three nickel-binding peptides were screened from a phage peptide library and displayed separately or in combination with surface-engineered Saccharomyces cerevisiae EBY100. The sorption of nickel ions on the surface of yeast cells increased with the increasing number of nickel Ni(II)-binding peptides displayed. The combined expression of the three peptides by EBY100/pYD1-N123 demonstrated the highest sorption of Ni(II) (2.603 ± 0.004 g g^-1, dry weight) and an enhanced sorption capacity of 60.15%, compared to S. cerevisiae EBY100. An orthogonal test for yeast immobilization was designed. A maximum sorption capability of 68.62% was observed for a treatment at 25°C with 2.0% calcium chloride and 3.0% sodium alginate.

Constitutive expression and cell-surface display of a bacterial β-mannanase in Lactobacillus plantarum

BACKGROUND

Lactic acid bacteria (LAB) are important microorganisms in the food and beverage industry. Due to their food-grade status and probiotic characteristics, several LAB are considered as safe and effective cell-factories for food-application purposes. In this present study, we aimed at constitutive expression of a mannanase from Bacillus licheniformis DSM13, which was subsequently displayed on the cell surface of Lactobacillus plantarum WCFS1, for use as whole-cell biocatalyst in oligosaccharide production.

RESULTS

Two strong constitutive promoters, Pgm and SlpA, from L. acidophilus NCFM and L. acidophilus ATCC4356, respectively, were used to replace the inducible promoter in the lactobacillal pSIP expression system for the construction of constitutive pSIP vectors. The mannanase-encoding gene (manB) was fused to the N-terminal lipoprotein anchor (Lp_1261) from L. plantarum and the resulting fusion protein was cloned into constitutive pSIP vectors and expressed in L. plantarum WCFS1. The localization of the protein on the bacterial cell surface was confirmed by flow cytometry and immunofluorescence microscopy. The mannanase activity and the reusability of the constructed L. plantarum displaying cells were evaluated. The highest mannanase activities on the surface of L. plantarum cells obtained under the control of the Pgm and SlpA promoters were 1200 and 3500 U/g dry cell weight, respectively, which were 2.6- and 7.8-fold higher compared to the activity obtained from inducible pSIP anchoring vectors. Surface-displayed mannanase was shown to be able to degrade galactomannan into manno-oligosaccharides (MOS).

CONCLUSION

This work demonstrated successful displaying of ManB on the cell surface of L. plantarum WCFS1 using constitutive promoter-based anchoring vectors for use in the production of manno-oligosaccharides, which are potentially prebiotic compounds with health-promoting effects. Our approach, where the enzyme of interest is displayed on the cell surface of a food-grade organism with the use of strong constitutive promoters, which continuously drive synthesis of the recombinant protein without the need to add an inducer or change the growth conditions of the host strain, should result in the availability of safe, stable food-grade biocatalysts.

Identification and evaluation of novel anchoring proteins for cell surface display on Saccharomyces cerevisiae

The development of arming yeast strains as whole-cell biocatalysts involves a selection of effective anchoring proteins to display enzymes and proteins on yeast cell surface. To screen for novel anchoring proteins with improved efficiency, a bioinformatics pipeline for the identification of glycosylphosphatidylinositol-anchored cell wall proteins (GPI-CWPs) suitable for attaching passenger proteins to the cell surface of Saccharomyces cerevisiae has been developed. Here, the C-terminal sequences (CTSs) of putative GPI-CWPs were selected based on the criteria that the sequence must contain a serine/threonine-rich (S/T) region of at least 30% S/T content, a total threonine content of at least 10%, a continuous S/T stretch of at least 130 amino acids in length, and a continuous T-rich region of at least 10 amino acids in length. Of the predicted 790 proteins, 37 putative GPI-CWPs were selected from different yeast and fungal species to be evaluated for their performance in displaying yeast-enhanced green fluorescent protein and β-glucosidase enzyme. This led to the identification of five novel anchoring proteins with higher performance compared to α-agglutinin used as benchmark. In particular, the CTS of uncharacterized protein in Kluyveromyces lactis, namely 6_Kl, is the most efficient anchoring protein of the group. The CTS of 6_Kl protein provided a β-glucosidase activity of up to 23.5 U/g cell dry weight, which is 2.8 times higher than that of the CTS of α-agglutinin. These identified CTSs could be potential novel anchoring protein candidates for construction of efficient arming yeasts for biotechnology applications in the future.

The Role of Yeast-Surface-Display Techniques in Creating Biocatalysts for Consolidated BioProcessing

Climate change is directly linked to the rapid depletion of our non-renewable fossil resources and has posed concerns on sustainability. Thus, imploring the need for us to shift from our fossil based economy to a sustainable bioeconomy centered on biomass utilization. The efficient bioconversion of lignocellulosic biomass (an ideal feedstock) to a platform chemical, such as bioethanol, can be achieved via the consolidated bioprocessing technology, termed yeast surface engineering, to produce yeasts that are capable of this feat. This approach has various strategies that involve the display of enzymes on the surface of yeast to degrade the lignocellulosic biomass, then metabolically convert the degraded sugars directly into ethanol, thus elevating the status of yeast from an immobilization material to a whole-cell biocatalyst. The performance of the engineered strains developed from these strategies are presented, visualized, and compared in this article to highlight the role of this technology in moving forward to our quest against climate change. Furthermore, the qualitative assessment synthesized in this work can serve as a reference material on addressing the areas of improvement of the field and on assessing the capability and potential of the different yeast surface display strategies on the efficient degradation, utilization, and ethanol production from lignocellulosic biomass.

Yeast arming systems: pros and cons of different protein anchors and other elements required for display

Yeast display is a powerful strategy that consists in exposing peptides or proteins of interest on the cell surface of this microorganism. Ever since initial experiments with this methodology were carried out, its scope has extended and many applications have been successfully developed in different science and technology fields. Several yeast display systems have been designed, which all involve introducting into yeast cells the gene fusions that contain the coding regions of a signal peptide, an anchor protein, to properly attach the target to the cell surface, and the protein of interest to be exposed, all of which are controlled by a strong promoter. In this work, we report the description of such elements for the alternative systems introduced by focusing particularly on anchor proteins. The comparisons made between them are included whenever possible, and the main advantages and inconveniences of each one are discussed. Despite the huge number of publications on yeast surface display and the revisions published to date, this topic has not yet been widely considered. Finally, given the growing interest in developing systems for non-Saccharomyces yeasts, the main strategies reported for some are also summarized.

Construction of bioengineered yeast platform for direct bioethanol production from alginate and mannitol

Brown macroalgae are a sustainable and promising source for bioethanol production because they are abundant in ocean ecosystems and contain negligible quantities of lignin. Brown macroalgae contain cellulose, hemicellulose, mannitol, laminarin, and alginate as major carbohydrates. Among these carbohydrates, brown macroalgae are characterized by high levels of alginate and mannitol. The direct bioconversion of alginate and mannitol into ethanol requires extensive bioengineering of assimilation processes in the standard industrial microbe Saccharomyces cerevisiae. Here, we constructed an alginate-assimilating S. cerevisiae recombinant strain by genome integration and overexpression of the genes encoding endo- and exo-type alginate lyases, DEH (4-deoxy-L-erythro-5-hexoseulose uronic acid) transporter, and components of the DEH metabolic pathway. Furthermore, the mannitol-metabolizing capacity of S. cerevisiae was enhanced by prolonged culture in a medium containing mannitol as the sole carbon source. When the constructed strain AM1 was anaerobically cultivated in a fermentation medium containing 6% (w/v) total sugars (approximately 1:2 ratio of alginate/mannitol), it directly produced ethanol from alginate and mannitol, giving 8.8 g/L ethanol and yields of up to 32% of the maximum theoretical yield from consumed sugars. These results indicate that all major carbohydrates of brown macroalgae can be directly converted into bioethanol by S. cerevisiae. This strain and system could provide a platform for the complete utilization of brown macroalgae.

Accurate analysis of fusion expression of Pichia pastoris glycosylphosphatidylinositol-modified cell wall proteins

Glycosylphosphatidylinositol (GPI)-anchored glycoproteins have diverse intrinsic functions in yeasts, and they also have different uses in vitro. The GPI-modified cell wall proteins GCW21, GCW51, and GCW61 of Pichia pastoris were chosen as anchoring proteins to construct co-expression strains in P. pastoris GS115. The hydrolytic activity and the amount of Candida antarctica lipase B (CALB) displayed on cell surface increased significantly following optimization of the fusion gene dosage and combination of the homogeneous or heterogeneous cell wall proteins. Maximum CALB hydrolytic activity was achieved at 4920 U/g dry cell weight in strain GS115/CALB-GCW (51 + 51 + 61 + 61) after 120 h of methanol induction. Changes in structural morphology and the properties of the cell surfaces caused by co-expression of fusion proteins were observed by transmission electron microscopy (TEM) and on plates containing cell-wall-destabilizing reagent. Our results suggested that both the outer and inner cell layers were significantly altered by overexpression of GPI-modified cell wall proteins. Interestingly, quantitative analysis of the inner layer components showed an increase in β-1,3-glucan, but no obvious changes in chitin in the strains overexpressing GPI-modified cell wall proteins.

Upgrading Laccase Production and Biochemical Properties: Strategies and Challenges

Improving laccases continues to be crucial in novel biotechnological developments and industrial applications, where they are concerned. This review breaks down and explores the potential of the strategies (conventional and modern) that can be used for laccase enhancement (increased production and upgraded biochemical properties such as stability and catalytic efficiency). The challenges faced with these approaches are briefly discussed. We also shed light on how these strategies merge and give rise to new options and advances in this field of work. Additionally, this article seeks to serve as a guide for students and academic researchers interested in laccases. This document not only gives basic information on laccases, but also provides updated information on the state of the art of various technologies that are used in this line of investigation. It also gives the readers an idea of the areas extensively studied and the areas where there is still much left to be done. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1015-1034, 2017.

Dual display of proteins on the yeast cell surface simplifies quantification of binding interactions and enzymatic bioconjugation reactions

Yeast surface display, a well-established technology for protein analysis and engineering, involves expressing a protein of interest as a genetic fusion to either the N- or C-terminus of the yeast Aga2p mating protein. Historically, yeast-displayed protein variants are flanked by peptide epitope tags that enable flow cytometric measurement of construct expression using fluorescent primary or secondary antibodies. Here, we built upon this technology to develop a new yeast display strategy that comprises fusion of two different proteins to Aga2p, one to the N-terminus and one to the C-terminus. This approach allows an antibody fragment, ligand, or receptor to be directly coupled to expression of a fluorescent protein readout, eliminating the need for antibody-staining of epitope tags to quantify yeast protein expression levels. We show that this system simplifies quantification of protein-protein binding interactions measured on the yeast cell surface. Moreover, we show that this system facilitates co-expression of a bioconjugation enzyme and its corresponding peptide substrate on the same Aga2p construct, enabling enzyme expression and catalytic activity to be measured on the surface of yeast.

Enhanced direct ethanol production by cofactor optimization of cell surface-displayed xylose isomerase in yeast

Xylose isomerase (XylC) from Clostridium cellulovorans can simultaneously perform isomerization and fermentation of d-xylose, the main component of lignocellulosic biomass, and is an attractive candidate enzyme. In this study, we optimized a specified metal cation in a previously established Saccharomyces cerevisiae strain displaying XylC. We investigated the effect of each metal cation on the catalytic function of the XylC-displaying S. cerevisiae. Results showed that the divalent cobalt cations (Co²⁺ ) especially enhanced the activity by 46-fold. Co²⁺ also contributed to d-xylose fermentation, which resulted in improving ethanol yields and xylose consumption rates by 6.0- and 2.7-fold, respectively. Utility of the extracellular xylose isomerization system was exhibited in the presence of mixed sugar. XylC-displaying yeast showed the faster d-xylose uptake than the yeast producing XI intracellularly. Furthermore, direct xylan saccharification and fermentation was performed by unique yeast co-culture system. A xylan-degrading yeast strain was established by displaying two kinds of xylanases; endo-1,4-β-xylanase (Xyn11B) from Saccharophagus degradans, and β-xylosidase (XlnD) from Aspergillus niger. The yeast co-culture system enabled fine-tuning of the initial ratios of the displayed enzymes (Xyn11B:XlnD:XylC) by adjusting the inoculation ratios of Xylanases (Xyn11B and XlnD)-displaying yeast and XylC-displaying yeast. When the enzymes were inoculated at the ratio of 1:1:2 (1.39 × 10¹³ : 1.39 × 10¹³ : 2.78 × 10¹³ molecules), 6.0 g/L ethanol was produced from xylan. Thus, the cofactor optimization and the yeast co-culture system developed in this study could expand the prospect of biofuels production from lignocellulosic biomass. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1068-1076, 2017.

Preliminary study of an oral vaccine against infectious hematopoietic necrosis virus using improved yeast surface display technology

Infectious hematopoietic necrosis virus (IHNV) is a common pathogen that causes severe disease in the salmonid aquaculture industry. Because oral vaccines induce more efficient mucosal immunity than parenteral immunization, an oral vaccine was developed with an improved yeast cell surface display technology to induce an immune response to IHNV. The oral yeast vaccine, designated EBY100/pYD1-bi-G, was delivered orally to rainbow trout (Oncorhynchus mykiss) on days 1 and 32, and the nonspecific and specific immune responses were measured 50days after the first vaccination. In the hindgut, spleen, and head kidney, the expression of IFN-1 and Mx-1 was significantly upregulated after oral vaccination with EBY100/pYD1-bi-G, and the highest expression of IFN-1 and Mx-1 was observed in the spleen (7.5-fold higher than the control group) and head kidney (3.9-fold higher than the control group), respectively. Several markers of the adaptive immune response (IgM, IgT, CD4, and CD8) were also significantly upregulated, and the highest expression of these markers was observed in the hindgut, suggesting that the mucosal immune response was successfully induced by oral vaccination with EBY100/pYD1-bi-G. Sera from the orally vaccinated rainbow trout showed higher anti-IHNV neutralizing antibody titers (antibody titer 81±4) than the control sera (antibody titer 7±3), and the relative percentage survival after IHNV challenge was 45.8% compared with 2% in the control group. Although the protection afforded by this orally delivered vaccine was lower than that of a DNA vaccine (83%-98%), it is a promising candidate vaccine with which to protect larval fish against IHNV, which are most susceptible to the virus and difficult to inject with a DNA vaccine.

An efficient and simple method to increase the level of displayed protein on the yeast cell surface

BACKGROUND

The development of oral vaccines using yeast surface display technology is an area of intensive study in vaccine development, but the protein level displayed on yeast surfaces is not currently high enough to obtain a robust immune response.

METHODS

To address this issue, we established an efficient and simple method of increasing the level of displayed protein on the yeast cell surface. We used the single chain variable fragment (scFv) of an antibody against the infectious hematopoietic necrosis virus isolate Sn1203 as a target display protein. The yeast-derived scFv was first displayed on the yeast surface by galactose induction, and then Escherichia coli-derived scFv was also displayed on the same yeast via an artificial anchoring condition to increase the total scFv level on the yeast surface.

RESULTS

The levels of yeast- and E. coli-derived scFv displayed on the yeast cell surface were analyzed by flow cytometry, western blotting, and fluorescent microscopy. The flow cytometry results indicated that when the cells were suspended in phosphate-buffered saline with 1mmol/L glutathione, 0.2mmol/L oxidized glutathione, and 5% dimethyl sulfoxide at 4°C for 6h, the E. coli-derived scFv protein was stably anchored to the yeast cell surface. The mean fluorescence intensity in these experiments, which is an indirect quantitative representation of the surface scFv expression, was three times higher in the treated cells than that in control cells. The western blotting results show two specific protein bands, the smaller of which was identified as the E. coli-derived scFv that was displayed on the yeast cell surface. Cell immunofluorescence is a more direct way to detect differentially produced proteins that are displayed on the yeast cell surface. The fluorescence microscopy results show that both fluorescence corresponding to the yeast-derived scFv and fluorescence corresponding to the E. coli-derived scFv can exist on the cell surface of same yeast cell. This confirms that the E. coli-derived scFv protein was successfully displayed on the yeast cell surface.

CONCLUSIONS

This method provides a rapid, simple, and high-efficiency strategy to increase the level of displayed protein on the yeast cell surface. Application of this technique may allow the yeast surface display system to be used to generate potential oral vaccines.

Display of a β-mannanase and a chitosanase on the cell surface of Lactobacillus plantarum towards the development of whole-cell biocatalysts

BACKGROUND

Lactobacillus plantarum is considered as a potential cell factory because of its GRAS (generally recognized as safe) status and long history of use in food applications. Its possible applications include in situ delivery of proteins to a host, based on its ability to persist at mucosal surfaces of the human intestine, and the production of food-related enzymes. By displaying different enzymes on the surface of L. plantarum cells these could be used as whole-cell biocatalysts for the production of oligosaccharides. In this present study, we aimed to express and display a mannanase and a chitosanase on the cell surface of L. plantarum.

RESULTS

ManB, a mannanase from Bacillus licheniformis DSM13, and CsnA, a chitosanase from Bacillus subtilis ATCC 23857 were fused to different anchoring motifs of L. plantarum for covalent attachment to the cell surface, either via an N-terminal lipoprotein anchor (Lp_1261) or a C-terminal cell wall anchor (Lp_2578), and the resulting fusion proteins were expressed in L. plantarum WCFS1. The localization of the recombinant proteins on the bacterial cell surface was confirmed by flow cytometry and immunofluorescence microscopy. The highest mannanase and chitosanase activities obtained for displaying L. plantarum cells were 890 U and 1360 U g dry cell weight, respectively. In reactions with chitosan and galactomannans, L. plantarum CsnA- and ManB-displaying cells produced chito- and manno-oligosaccharides, respectively, as analyzed by high performance anion exchange chromatography (HPAEC) and mass spectrometry (MS). Surface-displayed ManB is able to break down galactomannan (LBG) into smaller manno-oligosaccharides, which can support growth of L. plantarum.

CONCLUSION

This study shows that mannanolytic and chitinolytic enzymes can be anchored to the cell surface of L. plantarum in active forms. L. plantarum chitosanase- and mannanase-displaying cells should be of interest for the production of potentially 'prebiotic' oligosaccharides. This approach, with the enzyme of interest being displayed on the cell surface of a food-grade organism, may also be applied in production processes relevant for food industry.

Cell Surface Display Fungal Laccase as a Renewable Biocatalyst for Degradation of Persistent Micropollutants Bisphenol A and Sulfamethoxazole

Fungal laccases have high activity in degrading various persistent organic pollutants. However, using enzymes in solution for water treatment has limitations of nonreusability, short enzyme lifetimes, and high cost of single use. In this study, we developed a new type of biocatalyst by immobilizing fungal laccase on the surface of yeast cells using synthetic biology techniques. The biocatalyst, referred to as surface display laccase (SDL), had an enzyme activity of 104 ± 3 mU/g dry cell (with 2,2-azinobis-3-ethylbenzothiazoline-6-sulfonate (ABTS)). The SDL retained over 90% of the initial enzyme activity after 25 days storage at room temperature, while, in contrast, activity of free laccase declined to 60% of its initial activity. The SDL could be reused with high stability as it retained 74% of initial activity after eight repeated batch reactions. Proof-of-concept evaluations of the effectiveness of SDL in treating contaminants of emerging concern were performed with bisphenol A and sulfamethoxazole. Results from contaminant degradation kinetics and the effects of redox mediator amendment provided insights into the factors affecting the efficacy of the SDL system. This study reports, for the first time, the development of a surface display enzyme biocatalyst as an effective and renewable alternative for treating recalcitrant organic micropollutants.

Establishment of cell surface engineering and its development

Cell surface display of proteins/peptides has been established based on mechanisms of localizing proteins to the cell surface. In contrast to conventional intracellular and extracellular (secretion) expression systems, this method, generally called an arming technology, is particularly effective when using yeasts as a host, because the control of protein folding that is often required for the preparation of proteins can be natural. This technology can be employed for basic and applied research purposes. In this review, I describe various strategies for the construction of engineered yeasts and provide an outline of the diverse applications of this technology to industrial processes such as the production of biofuels and chemicals, as well as bioremediation and health-related processes. Furthermore, this technology is suitable for novel protein engineering and directed evolution through high-throughput screening, because proteins/peptides displayed on the cell surface can be directly analyzed using intact cells without concentration and purification. Functional proteins/peptides with improved or novel functions can be created using this beneficial, powerful, and promising technique.

Generation of a Functionally Distinct Rhizopus oryzae Lipase through Protein Folding Memory

Rhizopus oryzae lipase (ROL) has a propeptide at its N-terminus that functions as an intramolecular chaperone and facilitates the folding of mature ROL (mROL). In this study, we successfully generated a functionally distinct imprinted mROL (mROL^imp) through protein folding memory using a mutated propeptide. The mutated propeptide left its structural memory on mROL and produced mROL^imp that exhibited different substrate specificities compared with mROL^WT (prepared from the wild type propeptide), although the amino acid sequences of both mROLs were the same. mROL^imp showed a preference for substrates with medium chain-length acyl groups and, noticeably, recognized a peptidase-specific substrate. In addition, ROL^imp was more stable than mROL^WT. These results strongly suggest that proteins with identical amino acid sequences can fold into different conformations and that mutations in intramolecular chaperones can dynamically induce changes in enzymatic activity.

Development of new tolerant strains to hydrophilic and hydrophobic organic solvents by the yeast surface display methodology

Yeast surface display is a research methodology based on anchoring functional proteins and peptides onto the surface of the cells of this eukaryotic organism. Its development has resulted in the construction of a good number of new whole-cell biocatalysts with diverse applications in biotechnology, pharmacy, and medicine. In this work, we describe the design of new yeast strains in which several proteins and peptides have been introduced at the N-terminal position of protein agglutinin Aga2p. In all cases, proteins were correctly expressed and displayed on the cell surface according to the western blot, fluorescence microscopy, and fluorescence-activated cell sorting (FACS) analyses. The introduction of a glycosylable, Ser/Thr-rich protein (S1) resulted in improved resistance to ethanol, nonane, and dimethyl sulfoxide (DMSO) stress. The protein with a very high hydrophobic content (S2d) proved to confer tolerance to acetonitrile, ethanol, nonane, salt, and sodium dodecyl sulfate (SDS). The introduction of five leucine residues at the N-terminal position of S1 and S2 resulted in similar or increased resistance to the above-mentioned stress conditions. The adverse effects described in a previous work, when these residues were introduced into the N-terminus of Aga2p, with no other protein acting as a spacer, were not observed. Indeed, these strains grew better in the presence of hydrophilic solvents such as acetonitrile and ethanol. The new strains reported in this work have biotechnological potentiality given their behavior under adverse conditions of interest for biocatalytic and industrial processes.