Epoxide Syntheses and Ring-Opening Reactions in Drug Development

Stereoselective Shi-type epoxidation with 3-oxo-4,6-O-benzylidene pyranoside catalysts: unveiling the role of carbohydrate skeletons

Asymmetric epoxidation represents a hot topic in organic synthesis. In recent years, organocatalysts based on sugar skeletons have been exploited in asymmetric epoxidation to achieve enantiomeric pure epoxides. In this work, two different endocyclic ketones derived from glucose and galactose protected with a 4,6-O-benzylidene group have been prepared and exploited for Shi-type epoxidation. The two carbohydrates show an opposite preferential stereoselective epoxidation on various olefins, affording the epoxides in high conversions and modest enantioselectivities. DFT calculations disclosed the reasons behind the inversion of selectivity achieved by the two catalysts, showing that a delicate balance between the catalyst conformation, its protecting groups, and the secondary interactions with the substrate govern the final observed results.

Oxidovanadium(V) Schiff Base Complexes Derived from Chiral 3-amino-1,2-propanediol Enantiomers: Synthesis, Spectroscopic Studies, Catalytic and Biological Activity

Oxidovanadium(V) complexes, [(+)VOL1-5] and [(-)VOL1-5], with chiral tetradentate Schiff bases, which are products of monocondensation of S(‒)-3-amino-1,2-propanediol or R(+)-3-amino-1,2-propanediol with salicylaldehyde derivatives, have been synthesized. Different spectroscopic methods, viz. 1H and 51V NMR, IR, UV-Vis, and circular dichroism, as well as elemental analysis, have been used for their detailed characterization. Furthermore, the epoxidation of styrene, cyclohexene, and two monoterpenes, S(‒)-limonene and (‒)-α-pinene, using two oxidants, aqueous 30% H2O2 or tert-butyl hydroperoxide (TBHP) in decane, has been studied with catalytic amounts of all complexes. Finally, biological cytotoxicity studies have also been performed with these oxidovanadium(V) compounds for comparison with cis-dioxidomolybdenum(VI) Schiff base complexes with the same chiral ligands, as well as to determine the cytoprotection against the oxidative damage caused by 30% H2O2 in the HT-22 hippocampal neuronal cells in the range of their 10-100 μM concentration.

Electroreductive Access to 1,2-Aminoalcohols via Cross Aza-Pinacol Coupling of N-Acyl Diarylketimines and Aldehydes

We present highly efficient and operationally simple synthetic methods for 1,2-aminoalcohols via electroreductive cross aza-pinacol coupling between N-acyl diarylketimines and aldehydes. Preliminary mechanistic studies including cyclic voltammetry and density functional theory (DFT) calculations suggest that the reaction is instigated by selective electrochemical single electron transfer (SET) of N-acylketimines. The developed electrochemical protocol is compatible to biorelevant functional groups, enabling late-stage functionalization of pharmacophores.

Asymmetric Synthesis of Triazole Antifungal Agents Enabled by an Upgraded Strategy for the Key Epoxide Intermediate

A streamlined and efficient approach to the key epoxide intermediate for the asymmetric synthesis of triazole antifungal agents is presented. This synthesis highlights a P(NMe2)3-mediated nonylidic olefination of α-keto ester, ensuring the exclusive formation of the requisite (Z)-alkene, followed by a highly enantioselective Jacobsen epoxidation to establish the two vicinal stereocenters in a single step. The versatility of this strategy is exemplified through the efficient synthesis of efinaconazole and ravuconazole.

From Conventional to Sustainable Catalytic Approaches for Heterocycles Synthesis

Synthesis of heterocyclic compounds is fundamental for all the research area in chemistry, from drug synthesis to material science. In this framework, catalysed synthetic methods are of great interest to effective reach such important building blocks. In this review, we will report on some selected examples from the last five years, of the major improvement in the field, focusing on the most important conventional catalytic systems, such as transition metals, organocatalysts, to more sustainable ones such as photocatalysts, iodine-catalysed reaction, electrochemical reactions and green innovative methods.

Simultaneous Improvement in the Thermostability and Catalytic Activity of Epoxidase Lsd18 for the Synthesis of Lasalocid A

Enzymes used in the synthesis of natural products are potent catalysts, capable of efficient and stereoselective chemical transformations. Lsd18 catalyzes two sequential epoxidations during the biosynthesis of lasalocid A, a polyether polyketide natural product. We performed protein engineering on Lsd18 to improve its thermostability and catalytic activity. Utilizing structure-guided methods of FoldX and Rosetta-ddG, we designed 15 mutants of Lsd18. Screening of these mutants using thermal shift assay identified stabilized variants Lsd18-T189M, Lsd18-S195M, and the double mutant Lsd18-T189M-S195M. Trypsin digestion, molecular dynamic simulation, circular dichroism (CD) spectroscopy, and X-ray crystallography provided insights into the molecular basis for the improved enzyme properties. Notably, enhanced hydrophobic interaction within the enzyme core and interaction of the protein with the FAD cofactor appear to be responsible for its better thermostability.

Synthesis, Spectroscopic Characterization, Catalytic and Biological Activity of Oxidovanadium(V) Complexes with Chiral Tetradentate Schiff Bases

New oxidovanadium(V) complexes, VOL1-VOL10, with chiral tetradentate Schiff bases obtained by monocondensation reaction of salicylaldehyde derivatives with 1S,2S-(+)-2-amino-1-(4-nitrophenyl)-1,3-propanediol. All complexes have been characterized using different spectroscopic methods, viz. IR, UV-Vis, circular dichroism, one- (1H, 51V) and two-dimensional (COSY, NOESY) NMR spectroscopy, and elemental analysis. Furthermore, the catalytic ability of all compounds in the epoxidation of styrene, cyclohexene, and its naturally occurring monoterpene derivatives, i.e., S(-)-limonene and (-)-α-pinene has also been studied, using two different oxidants, i.e., aqueous 30% H2O2 or tert-butyl hydroperoxide (TBHP). In addition, the biological properties of these chiral oxidovanadium(V) compounds, but also cis-dioxidomolybdenum(VI) complexes with the same chiral Schiff bases, were studied. Their cytotoxic and cytoprotective activity studies with the HT-22 hippocampal neuronal cells revealed a concentration-dependent effect in the range of 10-100 μM. Moreover, vanadium(V) complexes, in contrast to cis-dioxidomolybdenum(VI) compounds, demonstrated higher cytotoxicity and lack of cytoprotective ability against H2O2-induced cytotoxicity.

Enantioselective Transformations in the Synthesis of Therapeutic Agents

The proportion of approved chiral drugs and drug candidates under medical studies has surged dramatically over the past two decades. As a consequence, the efficient synthesis of enantiopure pharmaceuticals or their synthetic intermediates poses a profound challenge to medicinal and process chemists. The significant advancement in asymmetric catalysis has provided an effective and reliable solution to this challenge. The successful application of transition metal catalysis, organocatalysis, and biocatalysis to the medicinal and pharmaceutical industries has promoted drug discovery by efficient and precise preparation of enantio-enriched therapeutic agents, and facilitated the industrial production of active pharmaceutical ingredient in an economic and environmentally friendly fashion. The present review summarizes the most recent applications (2008-2022) of asymmetric catalysis in the pharmaceutical industry ranging from process scales to pilot and industrial levels. It also showcases the latest achievements and trends in the asymmetric synthesis of therapeutic agents with state of the art technologies of asymmetric catalysis.

Synthesis, antiproliferative evaluation and in silico studies of a novel steroidal spiro morpholinone

Estrogens play a pivotal role in the development of estrogen-dependent breast cancer and other hormone-dependent disorders. A common strategy to overcome the pathological effects of estrogens is the use of aromatase inhibitors (AIs), which bind to the enzyme and prevent the union with the natural substrate, decreasing the amount of estrogens produced. Several AIs have been developed, including inhibitors with a steroidal backbone and a nitrogen heterocycle in their structure. Encouraged by the notable results presented by current and clinical steroidal drugs, herein we present the synthesis of a steroidal spiro morpholinone derivative as a plausible aromatase inhibitor. The morpholinone derivative was synthesized over a six-step methodology starting from estrone. The title compound and its hydroxychloroacetamide derivative precursor were evaluated for their antiproliferative profile against estrogen-dependent and independent solid tumor cell lines: A549, HBL-100, HeLa, SW1573, T-47D and WiDr. Both compounds exhibited a potent antiproliferative activity in the micromolar range against the six cancer cell lines, with the hydroxychloroacetamide derivative precursor being a more potent inhibitor (GI₅₀ = 0.25-2.4 µM) than the morpholinone derivative (GI₅₀ = 2.0-11 µM). Furthermore, both compounds showed, in almost all cases, better GI₅₀ values than the steroidal anticancer drugs abiraterone and galeterone. Docking simulations of the derivatives were performed in order to explain the experimental biological activity. The results showed interactions with the iron heme (derivative 3) and important residues of the steroidal binding-site (Met374) for the inhibition of human aromatase. A correlation was found between in vitro assays and the score obtained from the molecular docking study.

Covalent Tethers for Precise Amino Alcohol Syntheses: Ring Opening of Epoxides by Pendant Sulfamates and Sulfamides

We describe the development of the first ring opening of epoxides using pendant sulfamates and sulfamides. These reactions are promoted by a base and proceed under mild conditions to afford oxathiazinanes and cyclic sulfamides with excellent diastereoselectivity and regiocontrol. The reactions scale well, and the products serve as synthons for ring-opening reactions.

Preparation and Functionalization of Mono- and Polyfluoroepoxides via Fluoroalkylation of Carbonyl Electrophiles

We outline a new synthetic method to prepare mono- and polyfluoroepoxides from a diverse pool of electrophiles (ketones, acyl chlorides, esters) and fluoroalkyl anion equivalents. The initially formed α-fluoro alkoxides undergo subsequent intramolecular ring closure when heated. We demonstrated the versatility of the method through the isolation of 16 mono- and polyfluoroepoxide products. These compounds provide unique entry points for further diversification via either fluoride migration coupled with ring opening, or defluorinative functionalization reactions, the latter of which can be used as a late-stage method to install select bioactive moieties. The reaction sequences described herein provide a pathway to functionalize the commonly observed products formed from 1,2-addition into carbonyl electrophiles.

Merging Two Strained Carbocycles: Lewis Acid Catalyzed Remote Site-Selective Friedel-Crafts Alkylation of in Situ Generated β-Naphthol

Lewis acid catalyzed tandem activation of the two smallest carbocycles, 3-ethoxy cyclobutanones, and donor-acceptor cyclopropanes has been demonstrated. The diphenyl-substituted 3-ethoxy cyclobutanone rearranges itself by intramolecular cyclization for the in situ generation of 1-phenyl 2-naphthol, which further undergoes remote site-selective Friedel-Crafts alkylation with donor-acceptor cyclopropane to synthesize a series of γ-naphthyl butyric acid derivatives. Further control experiments for mechanistic investigations and synthetic applications have also been carried out.

Continuous Flow Epoxidation of Alkenes Using a Homogeneous Manganese Catalyst with Peracetic Acid

Epoxidation of alkenes is a valuable transformation in the synthesis of fine chemicals. Described herein are the design and development of a continuous flow process for carrying out the epoxidation of alkenes with a homogeneous manganese catalyst at metal loadings as low as 0.05 mol%. In this process, peracetic acid is generated in situ and telescoped directly into the epoxidation reaction, thus reducing the risks associated with its handling and storage, which often limit its use at scale. This flow process lessens the safety hazards associated with both the exothermicity of this epoxidation reaction and the use of the highly reactive peracetic acid. Controlling the speciation of manganese/2-picolinic acid mixtures by varying the ligand:manganese ratio was key to the success of the reaction. This continuous flow process offers an inexpensive, sustainable, and scalable route to epoxides.

Controlling the Hydrophilicity of the Electrochemical Interface to Modulate the Oxygen-Atom Transfer in Electrocatalytic Epoxidation Reactions

The electrocatalytic epoxidation of alkenes at heterogeneous catalysts using water as the sole oxygen source is a promising safe route toward the sustainable synthesis of epoxides, which are essential building blocks in organic chemistry. However, the physicochemical parameters governing the oxygen-atom transfer to the alkene and the impact of the electrolyte structure on the epoxidation reaction are yet to be understood. Here, we study the electrocatalytic epoxidation of cyclooctene at the surface of gold in hybrid organic/aqueous mixtures using acetonitrile (ACN) solvent. Gold was selected, as in ACN/water electrolytes gold oxide is formed by reactivity with water at potentials less anodic than the oxygen evolution reaction (OER). This unique property allows us to demonstrate that a sacrificial mechanism is responsible for cyclooctene epoxidation at metallic gold surfaces, proceeding through cyclooctene activation, while epoxidation at gold oxide shares similar reaction intermediates with the OER and proceeds via the activation of water. More importantly, we show that the hydrophilicity of the electrode/electrolyte interface can be tuned by changing the nature of the supporting salt cation, hence affecting the reaction selectivity. At low overpotential, hydrophilic interfaces formed using strong Lewis acid cations are found to favor gold passivation. Instead, hydrophobic interfaces created by the use of large organic cations favor the oxidation of cyclooctene and the formation of epoxide. Our study directly demonstrates how tuning the hydrophilicity of electrochemical interfaces can improve both the yield and selectivity of anodic reactions at the surface of heterogeneous catalysts.

Functionalized Chromans from ortho-Quinone Methides and Arylallenes

ortho-Quinone methides (o-QMs) underwent formal [4 + 2]-cycloaddition reactions with arylallenes regioselectively at the styrenyl olefin to furnish the corresponding 3-methylene-2-arylchromans in moderate to good yields (up to 88%). When R ≠ H, the reactions also proceeded with moderate stereoselectivity (up to 5:1) which was governed by the nature of the R group. The 3-methylene-2-arylchromans could serve as common intermediates for further functionalization including epoxidation, oxidative cleavage/Baeyer-Villiger oxidation, Riley oxidation, acid-catalyzed rearrangement, and Pd-catalyzed cross-coupling reactions to furnish the corresponding derivatives in moderate to good yields.

Bis(oxiranes) Containing Cyclooctane Core: Synthesis and Reactivity towards NaN3

Reactions of oxirane ring opening provide a powerful tool for regio- and stereoselective synthesis of polyfunctional and heterocyclic compounds, widely used in organic chemistry and drug design. Cyclooctane, alongside other medium-sized rings, is of interest as a novel molecular platform for the construction of target-oriented leads. Additionally, cyclooctane derivatives are well known to be prone to transannular reactions, which makes them a promising object in the search for novel approaches to polycyclic structures. In the present work, a series of cyclooctanediones was studied in Corey-Chaykovsky reactions, and novel spirocyclic bis(oxiranes) containing cyclooctane core, namely, 1,5-dioxadispiro[2.0.2.6]dodecane and 1,8-dioxadispiro[2.3.2.3]dodecane, were synthesized. Ring opening of the obtained bis(oxiranes) upon treatment with sodium azide was investigated, and it was found that the reaction path is determined by the reciprocal orientation of oxygen atoms in the oxirane moieties. Diastereomers of the bis(oxiranes) with cis-orientation underwent independent ring opening, supplying corresponding diazidodiols, while in the case of stereoisomers with trans-orientation, domino-like reactions occurred, including intramolecular nucleophilic attack and the formation of a novel three- or six-membered O-containing ring. Summarily, a straightforward approach to polyfunctional compounds containing cyclooctane or oxabicyclo[3.3.1]nonane cores, employing bis(oxiranes), was elaborated.

Epoxides: Small Rings to Play with under Asymmetric Organocatalysis

Optically pure epoxides are recognized as highly valuable products and key intermediates, useful in different areas from pharmaceutical and agrochemical industries to natural product synthesis and materials science. The predictable fate of the ring-opening process, in terms of stereoselectivity and often of regioselectivity, enables useful functional groups to be installed at vicinal carbon atoms in a desired manner. In this way, products of widespread utility either for synthetic applications or as final products can be obtained. The advent of asymmetric organocatalysis provided a new convenient tool, not only for their preparation but also for the elaboration of this class of heterocycles. In this review, we focus on recent developments of stereoselective organocatalytic ring-opening reactions of meso-epoxides, kinetic resolution of racemic epoxides, and Meinwald-type rearrangement. Examples of asymmetric organocatalytic processes toward specific synthetic targets, which include ring opening of an epoxide intermediate, are also illustrated.

Mechanistic Details of the Sharpless Epoxidation of Allylic Alcohols—A Combined URVA and Local Mode Study

In this work, we investigated the catalytic effects of a Sharpless dimeric titanium (IV)–tartrate–diester catalyst on the epoxidation of allylalcohol with methyl–hydroperoxide considering four different orientations of the reacting species coordinated at the titanium atom (reactions R1–R4) as well as a model for the non-catalyzed reaction (reaction R0). As major analysis tools, we applied the URVA (Unified Reaction Valley Approach) and LMA (Local Mode Analysis), both being based on vibrational spectroscopy and complemented by a QTAIM analysis of the electron density calculated at the DFT level of theory. The energetics of each reaction were recalculated at the DLPNO-CCSD(T) level of theory. The URVA curvature profiles identified the important chemical events of all five reactions as peroxide OO bond cleavage taking place before the TS (i.e., accounting for the energy barrier) and epoxide CO bond formation together with rehybridization of the carbon atoms of the targeted CC double bond after the TS. The energy decomposition into reaction phase contribution phases showed that the major effect of the catalyst is the weakening of the OO bond to be broken and replacement of OH bond breakage in the non-catalyzed reaction by an energetically more favorable TiO bond breakage. LMA performed at all stationary points rounded up the investigation (i) quantifying OO bond weakening of the oxidizing peroxide upon coordination at the metal atom, (ii) showing that a more synchronous formation of the new CO epoxide bonds correlates with smaller bond strength differences between these bonds, and (iii) elucidating the different roles of the three TiO bonds formed between catalyst and reactants and their interplay as orchestrated by the Sharpless catalyst. We hope that this article will inspire the computational community to use URVA complemented with LMA in the future as an efficient mechanistic tool for the optimization and fine-tuning of current Sharpless catalysts and for the design new of catalysts for epoxidation reactions.

Construction of a chiral zinc-camphorate framework for enantioselective separation

A chiral metal-organic framework (CMOF) with open chiral channels and multiple recognition sites is constructed from camphoric acid and a dipyridyl ligand. It can act as an efficient chiral solid adsorbent, capable of separating a variety of racemic alcohols and epoxides with excellent enantioselectivities.

Synthesis of pyrimidine-containing alkaloids

This review deals with the synthesis of naturally occurring alkaloids containing partially or completely saturated pyrimidine nuclei. The interest in these compounds is associated with their structural diversity, high biological activity and toxicity. The review is divided into four parts, each of which describes a number of synthetic methodologies toward structurally different naturally occurring alkaloids containing saturated cyclic six-membered amidine, guanidine, aminal and urea (thiourea) moieties, respectively. The development of various synthetic strategies for the preparation of these compounds has remarkably increased during the past few decades. This is primarily due to the fact that some of these compounds are isolated only in limited quantities, which makes it practically impossible to study their full structural characteristics and biological activity.

Ring Opening of Epoxides by Pendant Silanols

We present a new ring-opening reaction of epoxides by pendant silanols, catalyzed by either Ph₃C⁺BF₄^- or BINOL-phosphoric acid. Silanol epoxides derived from trans-allylic alcohols, cis-allylic alcohols, trans-homoallylic alcohols, and cis-homoallylic alcohols were all compatible and gave products from either endo- or exo-ring opening. With silanol epoxides derived from 4-alkenyl silanols, an unusual rearrangement to tetrahydrofuran products was observed. The utility of this methodology was demonstrated in a short preparation of protected d-arabitol.

Bio-click chemistry: a bridge between biocatalysis and click chemistry

The fields of click chemistry and biocatalysis have rapidly grown over the last two decades. The development of robust and active biocatalysts and the widespread use of straightforward click reactions led to significant interactions between these two fields. Therefore the name bio-click chemistry seems to be an accurate definition of chemoenzymatic reactions cooperating with click transformations. Bio-click chemistry can be understood as the approach towards molecules of high-value using a green and sustainable approach by exploiting the potential of biocatalytic enzyme activity combined with the reliable nature of click reactions. This review summarizes the principal bio-click chemistry reactions reported over the last two decades, with a special emphasis on small molecules. Contributions to the field of bio-click chemistry are manifold, but the synthesis of chiral molecules with applications in medicinal chemistry and sustainable syntheses will be especially highlighted.

Stereoselective synthesis of trisubstituted epoxides via cobalt catalysis

Catalytic epoxide synthesis by transition-metal catalysis offers an atom- and step-economical route from readily available aldehydes and diazocarbonyl compounds.

A potent candidate against Zika virus infection: Synthesis, bioactivity, radiolabeling and biodistribution studies

Compound VI exhibits potent activity against Zika virus infection combined with favorable cellular uptake and biodistribution without apparent cytotoxicity in a mouse model.

Synthesis of the new analogs of morpholine and their antiplasmodial evaluation against the human malaria parasite Plasmodium falciparum

A series of morpholine analogs functionalized with hydroxyethylamine (HEA) pharmacophore was synthesized and assayed for the initial screening against Plasmodium falciparum 3D7 in culture, which suggested that analog 6k is a hit molecule with an inhibitory concentration of 5.059 ± 0.2036 μM.

Antiviral evaluation of hydroxyethylamine analogs: Inhibitors of SARS-CoV-2 main protease (3CLpro), a virtual screening and simulation approach

The continued toll of COVID-19 has halted the smooth functioning of civilization on a global scale. With a limited understanding of all the essential components of viral machinery and the lack of structural information of this new virus, initial drug discovery efforts had limited success. The availability of high-resolution crystal structures of functionally essential SARS-CoV-2 proteins, including 3CLpro, supports the development of target-specific therapeutics. 3CLpro, the main protease responsible for the processing of viral polypeptide, plays a vital role in SARS-CoV-2 viral replication and translation and is an important target in other coronaviruses. Additionally, 3CLpro is the target of repurposed drugs, such as lopinavir and ritonavir. In this study, target proteins were retrieved from the protein data bank (PDB IDs: 6 M03, 6LU7, 2GZ7, 6 W63, 6SQS, 6YB7, and 6YVF) representing different open states of the main protease to accommodate macromolecular substrate. A hydroxyethylamine (HEA) library was constructed from harvested chemical structures from all the series being used in our laboratories for screening against malaria and Leishmania parasites. The database consisted of ∼1000 structure entries, of which 70% were new to ChemSpider at the time of screening. This in-house library was subjected to high throughput virtual screening (HTVS), followed by standard precision (SP) and then extra precision (XP) docking (Schrodinger LLC 2021). The ligand strain and complex energy of top hits were calculated by Molecular Mechanics Generalized Born Surface Area (MM/GBSA) method. Promising hit compounds (n = 40) specifically binding to 3CLpro with high energy and average MM/GBSA scores were then subjected to (100-ns) MD simulations. Using this sequential selection followed by an in-silico validation approach, we found a promising HEA-based compound (N,N'-((3S,3'S)-piperazine-1,4-diylbis(3-hydroxy-1-phenylbutane-4,2-diyl))bis(2-(5-methyl-1,3-dioxoisoindolin-2-yl)-3-phenylpropanamide)), which showed high in vitro antiviral activity against SARS-CoV-2. Further to reduce the size of the otherwise larger ligand, a pharmacophore-based predicted library of ∼42 derivatives was constructed, which were added to the previous compound library and rescreened virtually. Out of several hits from the predicted library, two compounds were synthesized, tested against SARS-CoV-2 culture, and found to have markedly improved antiviral activity.

Recent Advances in the Green Synthesis of Heterocycles: From Building Blocks to Biologically Active Compounds

Recent advances in the environmentally benign synthesis of common heterocycles are described. This account features three main parts; the preparation of non-aromatic heterocycles, one-ring aromatic heterocycles and their condensed analogs. Due to the great variety of and high interest in these compounds, this work focuses on providing representative examples of the preparation of the target compounds.

Asymmetric Catalytic Epoxidation of Terminal Enones for the Synthesis of Triazole Antifungal Agents

An enantioselective epoxidation of α-substituted vinyl ketones was realized to construct the key epoxide intermediates for the synthesis of various triazole antifungal agents. The reaction proceeded efficiently in high yields with good enantioselectivities by employing a chiral N,N'-dioxide/Sc^III complex as the chiral catalyst and 35% aq. H₂O₂ as the oxidant. It enabled the facile transformation for optically active isavuconazole, efinaconazole, and other potential antifungal agents.

A new and efficient methodology for olefin epoxidation catalyzed by supported cobalt nanoparticles

A new heterogeneous catalytic system consisting of cobalt nanoparticles (CoNPs) supported on MgO and tert-butyl hydroperoxide (TBHP) as oxidant is presented. This CoNPs@MgO/t-BuOOH catalytic combination allowed the epoxidation of a variety of olefins with good to excellent yield and high selectivity. The catalyst preparation is simple and straightforward from commercially available starting materials and it could be recovered and reused maintaining its unaltered high activity.

Rhodamine B oxidation promoted by P450-bioinspired Jacobsen catalysts/cellulose systems

P450-bioinspired Jacobsen/Cell(NEt2) catalysts have been applied in RhB dye oxidation, which is used illegally in food industries of some countries.