Chitosan Coating Applications in Probiotic Microencapsulation

Recent advances in fucoidan-based improved delivery systems: Structure, carrier types and biomedical applications

Consumer demand for nutritional supplements has fueled the rapid growth of the functional food market. However, ensuring the stability of functional factors in harsh environments remains a major challenge. The development of encapsulation systems is regarded as an effective method for enhancing the stability of functional factors, encapsulation carriers can offer protection for these functional factors. However, the selection of materials remains a significant constraint in the construction of delivery systems. Therefore, developing new encapsulation materials is crucial for advancing delivery systems, preserving the stability of functional factors, and ensuring public health. Fucoidan, a sulfated marine polysaccharide, has garnered significant attention in the field of encapsulation due to its notable advantages, including its remarkable bioactivity, biocompatibility, and targeted binding properties. Fucoidan-improved delivery systems provide new strategies for encapsulation of functional factors. This review first describes the structure of fucoidan, its modification and lists the applications of modified fucoidan, and assesses its feasibility for enhancing delivery systems. Second, it summarizes several common encapsulation technologies and methods, and outlines various carrier types based on fucoidan. Finally, it elucidates recent advances in the biomedical applications of fucoidan-improved delivery systems. Notably, it also presents the challenges and future prospects of this promising field.

Development of Chitosan-Polyacrylic Acid Complex Systems for Enhanced Oral Delivery of Lactobacillus Gasseri and Bifidobacterium Bifidum Probiotics

Introduction

The beneficial effects of probiotics are encountered by their low viability in gastrointestinal conditions and their insufficient stability during manufacturing, throughut the gastrointestinal transit, and storage. Therefore, novel systems are highly required to improve probiotics delivery.

Methods

In this study, Lactobacillus gasseri (L), Bifidobacterium bifidum (B), and a combination of L+B were encapsulated in chitosan (CS)-polyacrylic acid (PAA) complex systems (CS-PAA). The CS-PAA systems were analysed on basis of morphology, size, and zeta potential. The loaded CS-PAA systems were evaluated for their morphology, particle size, zetapotential, vaiability in both simulated gastroic and intestinal fluids, and stability at 4°C storage temparature. Moreover, the antibiofilm activity of the probiotics-loaded systems were evaluated againt Campylobacter jejuni, Pseudomonas aeruginosa and Escherichia coli.

Results

Probiotic strains were successfully incorporated into the porous structures of the CS-PAA systems, either individually or in combination. The Loaded L, B, and L+B showed higher particle size than the unloaded particles and excellent viability in simulated gastric and intestinal fluids, where the free probiotic species were undetected. Additionally the loaded probiotic exhibited an anti-biofilm effect at 0.5 mg/mL concentration level.

Conclusion

The CS-PAA complexes demonstrate a promising mechanism for the effective delivery of incorporated probiotics. The probiotics exhibited high viability and maintain stability under physiological conditions, and showed a remarkable anti-biofilm activity. These characteristics suggest that CS-PAA could serve as an alternative system for probiotics, enhancing gut microbiota health and offering a robust protection against microbial pathogens.

Edible Alginate-Fungal Chitosan Coatings as Carriers for Lacticaseibacillus casei LC03 and Their Impact on Quality Parameters of Strawberries During Cold Storage

This study investigated the efficacy of an innovative edible coating, composed of fungal chitosan and alginate, functionalized with Lacticaseibacillus casei LC03, in both free and microencapsulated forms, to extend the shelf life and enhance the nutritional value of strawberries. L. casei LC03 cells were successfully encapsulated in alginate microparticles (MAL) and further coated with chitosan (MALC), resulting in enhanced protection (cell reduction below 1.4 CFU/mL), viability (8.02 log CFU/mL), and encapsulation efficiencies exceeding 90%. The edible coating with L. casei microencapsulated in alginate and coated with fungal chitosan (CACLM) significantly improved strawberry preservation by maintaining pH (3.16 ± 0.41), titratable acidity (0.94 ± 0.20), moisture (90.74 ± 0.27), and microbial quality, and delayed the decrease in total phenolic compounds (below 40%) during the storage time of strawberries. While coatings with free L. casei (CALF) slightly reduced color parameters (L* value 29.13 ± 2.05), those with chitosan (CACLM) demonstrated lower weight loss (below 6%). Overall, the alginate-chitosan coating, particularly when combined with microencapsulated L. casei, proved effective in maintaining the quality, safety, and nutritional value of strawberries during refrigerated storage, highlighting its potential for developing functional, eco-friendly packaging solutions. This research contributes to the development of sustainable food preservation strategies and functional foods.

Advances in bio-polymer coatings for probiotic microencapsulation: chitosan and beyond for enhanced stability and controlled release

This review paper analyzes recent advancements in bio-polymer coatings for probiotic microencapsulation, with a particular emphasis on chitosan and its synergistic combinations with other materials. Probiotic microencapsulation is essential for protecting probiotics from environmental stresses, enhancing their stability, and ensuring effective delivery to the gut. The review begins with an overview of probiotic microencapsulation, highlighting its significance in safeguarding probiotics through processing, storage, and gastrointestinal transit. Advances in chitosan-based encapsulation are explored, including the integration of chitosan with other bio-polymers such as alginate, gelatin, and pectin, as well as the application of nanotechnology and innovative encapsulation techniques like spray drying and layer-by-layer assembly. Detailed mechanistic insights are integrated, illustrating how chitosan influences gut microbiota by promoting beneficial bacteria and suppressing pathogens, thus enhancing its role as a prebiotic or synbiotic. Furthermore, the review delves into chitosan's immunomodulatory effects, particularly in the context of inflammatory bowel disease (IBD) and autoimmune diseases, describing the immune signaling pathways influenced by chitosan and linking gut microbiota changes to improvements in systemic immunity. Recent clinical trials and human studies assessing the efficacy of chitosan-coated probiotics are presented, alongside a discussion of practical applications and a comparison of in vitro and in vivo findings to highlight real-world relevance. The sustainability of chitosan sources and their environmental impact are addressed, along with the novel concept of chitosan's role in the gut-brain axis. Finally, the review emphasizes future research needs, including the development of personalized probiotic therapies and the exploration of novel bio-polymers and encapsulation techniques.

Gum Arabic/Chitosan Coacervates for Encapsulation and Protection of Lacticaseibacillus rhamnosus in Storage and Gastrointestinal Environments

Probiotics, such as Lacticaseibacillus rhamnosus, are essential to the food industry for their health benefits to the host. The Lcb. rhamnosus strain is susceptible to processing, gastrointestinal, and storage conditions. In this study, Lcb. rhamnosus strains were encapsulated by complex coacervation in a gum arabic/chitosan or gum arabic/trehalose/chitosan and cross-linked with sodium tripolyphosphate. The physicochemical properties (zeta potential, water activity, water content, and hygroscopicity), encapsulation efficiency, and probiotic survival under storage conditions and simulated gastrointestinal fluids were evaluated. The results showed that crosslinking improves the encapsulation efficiency after drying; however, this result was remarkable when trehalose was used as a cryoprotectant. Furthermore, the encapsulation matrix preserved the viability of probiotics during 12 weeks with probiotic counts between 8.7-9.5, 7.5-9.0, and 5.2-7.4 log10 CFU g-1 at -20, 4, and 20 °C, respectively. After 12 days of digestion in an ex vivo simulator, acetic, butyric, propionic, and lactic acid production changed significantly, compared to free probiotic samples. This work shows that encapsulation by complex coacervation can promote the stability of probiotic bacteria in storage conditions and improve the viability of Lcb. rhamnosus HN001 during consumption so that they can exert their beneficial action in the organism.

Advances in Yeast Probiotic Production and Formulation for Preventative Health

The use of probiotics has been gaining popularity in terms of inclusion into human diets over recent years. Based on properties exerted by these organisms, several benefits have been elucidated and conferred to the host. Bacteria have been more commonly used in probiotic preparations compared to yeast candidates; however, yeast exhibit several beneficial properties, such as the prevention and treatment of diarrhea, the production of antimicrobial agents, the prevention of pathogen adherence to intestinal sites, the maintenance of microbial balance, the modulation of the immune system, antibiotic resistance, amongst others. Saccharomyces boulardii is by far the most studied strain; however, the potential for the use of other yeast candidates, such as Kluyveromyces lactis and Debaryomyces hansenii, amongst others, have also been evaluated in this review. Furthermore, a special focus has been made regarding the production considerations for yeast-based probiotics and their formulation into different delivery formats. When drafting this review, evidence suggests that the use of yeasts, both wild-type and genetically modified candidates, can extend beyond gut health to support skin, the respiratory system, and overall immune health. Hence, this review explores the potential of yeast probiotics as a safe, effective strategy for preventative health in humans, highlighting their mechanisms of action, clinical applications, and production considerations.

Encapsulation of Lactiplantibacillus plantarum probiotics through cross-linked chitosan and casein for improving their viability, antioxidant and detoxification

In the present study, encapsulation of Lactiplantibacillus plantarum (L.p) was performed using chitosan and casein through calcium phosphate intercrossing. Chitosan and casein both considered as non-toxic and biocompatible food derived components with intrinsic antioxidant properties. Layer by layer strategy was performed for deposition of modified cross-linked chitosan along with casein as the novel protective layers on the surface of probiotics. After confirmation of successful encapsulation, the viability and antioxidant activity of encapsulated L.p was evaluated. The results showed enhanced survival and antioxidant activity of encapsulated L.p compared to free bacteria in simulated digestive conditions. The survival of free and encapsulated L.p was respectively 1.38 ± 0.29 log cfu/ml and 6.99 ± 0.12 log cfu/ml in SGF and 8.54 ± 0.05 log cfu/ml and 7.25 ± 0.23 log cfu/ml in SIJ after 2 h of incubation. HPLC analysis was also used to investigate the detoxification activity of probiotics toward Aflatoxin M1 and obtained results showed encapsulated bacteria could significantly reduce aflatoxin M1 (68.44 ± 0.5 %) compared to free bacteria (43.76 ± 0.54 %). The results of this research suggest that the chitosan/casein mediated encapsulation of L.p with layer-by-layer technology is an effective method to improve the survival and antioxidant properties of probiotics with enhanced detoxification of AFM1.

Antifouling activity of PEGylated chitosan coatings: Impacts of the side chain length and encapsulated ZnO/Ag nanoparticles

PEGylation is regarded as a common antifouling strategy and the effect is normally linked with surface hydrophilicity of the coatings. Herein, the biopolymer chitosan (CS) was grafted by polyethylene glycol (PEG) of different chain lengths (molecular weight 200, 4 k and 100 k Da) to verify if the hydrophilicity of CS-PEG coatings is crucial in determining antifouling activities and if PEG chain length influences biofouling in marine environment. Properties of copolymers such as melting points and crystallinity are affected by grafting PEG. The water contact angle (WCA) of CS-PEG coatings increases with the chain length of grafted PEG, from 27° to 58°. Photocatalyst of zinc oxide-silver (ZnO/Ag) was also studied and its embedment (2 % to CS-PEG) renders the surface of CS-PEG coatings more hydrophobic with WCA increased from 52° to 86°. Antibacterial, anti-diatom, and anti-biofilm activities of the coatings were evaluated in natural sea water. The bacterial density on CS-PEG coatings was dramatically reduced to 4 × 104 compared to the control of 7 × 104 ind/mm2, and further to 2 × 104 for CS-PEG-ZnO/Ag coatings. CS-PEG coatings also strongly inhibit diatoms (120-200 ind/mm2), but the inclusion of ZnO/Ag did not obviously enhance such effect (50-150 ind/mm2). The findings provide useful insights for designing polymer-based antifouling coatings.

Recent advances in bacteria-based platforms for inflammatory bowel diseases treatment

Inflammatory bowel disease (IBD) is a recurring chronic inflammatory disease. Current treatment strategies are aimed at alleviating clinical symptoms and are associated with gastrointestinal or systemic adverse effects. New delivery strategies are needed for the treatment of IBD. Bacteria are promising biocarriers, which can produce drugs in situ and sense the gut in real time. Herein, we focus on recent studies of engineered bacteria used for IBD treatment and introduce the application of engineered bacteria in the diagnosis. On this basis, the current dilemmas and future developments of bacterial delivery systems are discussed.

A Current Trend in Efficient Biopolymer Coatings for Edible Fruits to Enhance Shelf Life

In recent years, biopolymer coatings have emerged as an effective approach for extending the shelf life of edible fruits. The invention of biopolymer coverings has emerged as an innovation for extending fruit shelf life. Natural polymers, like chitosan, alginate, and pectin, are used to create these surfaces, which have several uses, including creating a barrier that prevents water evaporation, the spread of living microbes, and respiratory movement. These biopolymer coatings' primary benefits are their environmental friendliness and lack of damage. This study highlights the advancements made in the creation and usage of biopolymer coatings, highlighting how well they preserve fruit quality, reduce post-harvest losses, and satisfy consumer demand for natural preservation methods. This study discusses the usefulness of the biopolymer coating in terms of preserving fruit quality, reducing waste, and extending the product's shelf life. Biopolymer coatings' potential as a sustainable solution for synthetic preservatives in the fruit sector is highlighted as are formulation process advances that combine natural ingredients and environmental implications. This essay focuses on the essential methods, such as new natural additives, as well as the environmental effect of biopolymer coatings, which are safe and healthy commercial alternatives.

Microencapsulation, Physicochemical Characterization, and Antioxidant, Antibacterial, and Antiplasmodial Activities of Holothuria atra Microcapsule

This study provides the design of a microencapsulation formula, physicochemical characterization, and antioxidant, antibacterial, and antiplasmodial activities of Holothuria atra microcapsules. The ethanolic extract of H. atra was microencapsulated with chitosan (CHI) and sodium tripolyphosphate (Na-TPP) with various stirring times: 60 minutes (CHI60), 90 minutes (CHI90), and 120 minutes (CHI120). The microcapsules were then observed for physicochemical properties using scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). The microcapsules were tested for antioxidant activity and antibacterial activity against Staphylococcus aureus and Escherichia coli using the DPPH (2,2-diphenyl-1-picrylhydrazyl) method. Antiplasmodial bioactivity was assessed through in silico molecular docking. The CHI60 and CHI120 microcapsules exhibited a smaller size and an irregular spherical shape, while the same FTIR profile was observed in CHI90 and CHI120. The bioactivity tests demonstrated that CHI90 exhibited high antibacterial activity against E. coli and S. aureus, while CHI120 exhibited high antioxidant performance. Calcigeroside B and Echinoside B exhibited antiplasmodial activity against the Plasmodium falciparum dihydroorotate dehydrogenase (PfDHODH) protein, along with an artemisinin inhibition mechanism. In conclusion, the microcapsules with the CHI90 formula demonstrated the best antibacterial activity, while the CHI120 formula exhibited high antioxidant activity. Two terpenoids, Calcigeroside B and Echinoside B, exhibited the best antiplasmodial activity.

Encapsulation of Active Substances in Natural Polymer Coatings

Already used in the food, pharmaceutical, cosmetic, and agrochemical industries, encapsulation is a strategy used to protect active ingredients from external degradation factors and to control their release kinetics. Various encapsulation techniques have been studied, both to optimise the level of protection with respect to the nature of the aggressor and to favour a release mechanism between diffusion of the active compounds and degradation of the barrier material. Biopolymers are of particular interest as wall materials because of their biocompatibility, biodegradability, and non-toxicity. By forming a stable hydrogel around the drug, they provide a 'smart' barrier whose behaviour can change in response to environmental conditions. After a comprehensive description of the concept of encapsulation and the main technologies used to achieve encapsulation, including micro- and nano-gels, the mechanisms of controlled release of active compounds are presented. A panorama of natural polymers as wall materials is then presented, highlighting the main results associated with each polymer and attempting to identify the most cost-effective and suitable methods in terms of the encapsulated drug.

Application of biomacromolecules encapsulation systems for the long-term storage of Lactobacillus plantarum F1 and Lactobacillus reuteri 182

The aim of this study was to improve the viability of lactic acid bacteria (LAB) during extended storage of 1 year and mechanical characteristics of the calcium alginate beads with co-encapsulation of prebiotics and chitosan coating and subsequent freeze drying. The results revealed that the addition of trehalose to alginate matrix effectively protects the LAB cells during freeze drying, i.e., the survival rate has increased up to more than 92.5 %. Chitosan coating reinforced Ca-alginate beads, therefore the sphericity and mechanical strength of the beads improved. The findings also showed that bacteria encapsulation with the prebiotics resulted in more cells stability during the prolonged storage of 1 year and were 4.82 ± 0.06 log CFU g-1 in the lyophilized alginate-trehalose beads for Lactobacillus plantarum and 5.64 ± 0.08 log CFU g-1 in the lyophilized alginate-trehalose-inulin beads for Lactobacillus reuteri. No survival, however, was noted for the LAB cells in wet capsules after the same period. This study demonstrated that prebiotics had a significant impact on the viability of cells during freeze drying and storage. What is more, physical properties of the alginate beads were enhanced by coating beads with the chitosan.

Advances in polysaccharides for probiotic delivery: Properties, methods, and applications

Probiotics are essential to improve the health of the host, whereas maintaining the viability of probiotics in harsh environments remains a challenge. Polysaccharides have non-toxicity, excellent biocompatibility, and outstanding biodegradability, which can protect probiotics by forming a physical barrier and show a promising prospect for probiotic delivery. In this review, we summarize polysaccharides commonly used for probiotic microencapsulation and introduce the microencapsulation technologies, including extrusion, emulsion, spray drying, freeze drying, and electrohydrodynamics. We discuss strategies for better protection of probiotics and introduce the applications of polysaccharides-encapsulated probiotics in functional food, oral formulation, and animal feed. Finally, we propose the challenges of polysaccharides-based delivery systems in industrial production and application. This review will help provide insight into the advances and challenges of polysaccharides in probiotic delivery.

Nuciferine-loaded chitosan hydrogel-integrated 3D-printed polylactic acid scaffolds for bone tissue engineering: A combinatorial approach

Critical-sized bone defects resulting from severe trauma and open fractures cannot spontaneously heal and require surgical intervention. Limitations of traditional bone grafting include immune rejection and demand-over-supply issues leading to the development of novel tissue-engineered scaffolds. Nuciferine (NF), a plant-derived alkaloid, has excellent therapeutic properties, but its osteogenic potential is yet to be reported. Furthermore, the bioavailability of NF is obstructed due to its hydrophobicity, requiring an efficient drug delivery system, such as chitosan (CS) hydrogel. We designed and fabricated polylactic acid (PLA) scaffolds via 3D printing and integrated them with NF-containing CS hydrogel to obtain the porous biocomposite scaffolds (PLA/CS-NF). The fabricated scaffolds were subjected to in vitro physicochemical characterization, cytotoxicity assays, and osteogenic evaluation studies. Scanning electron microscopic studies revealed uniform pore size distribution on PLA/CS-NF scaffolds. An in vitro drug release study showed a sustained and prolonged release of NF. The cyto-friendly nature of NF in PLA/CS-NF scaffolds towards mouse mesenchymal stem cells (mMSCs) was observed. Also, cellular and molecular level studies signified the osteogenic potential of NF in PLA/CS-NF scaffolds on mMSCs. These results indicate that the PLA/CS-NF scaffolds could promote new bone formation and have potential applications in bone tissue engineering.

Edible Gels with Cranberry Extract: Evaluation of Anthocyanin Release Kinetics

The bioactive compounds found in cranberry fruit are natural antioxidants, and their consumption reduces the risk of diabetes, cardiovascular disease, cancers, and urinary tract infections. Oral gels with cranberry fruit extract are a promising product that can ensure accurate dosage and release of the active compounds and are suitable for people with dysphagia. The aim of this study was to determine the effect of polymeric materials on the dissolution kinetics of cranberry fruit anthocyanins from gel formulations. Gel formulations were prepared using freeze-dried cranberry fruit extract with different gelling excipients: chitosan (G1-G3), sodium carboxymethylcellulose (G4-G6), and sodium carboxymethylcellulose combined with carbomers (G7-G9). The dissolution test showed that the release of anthocyanins from gel formulations G1-G6 and G9 was most intense within the first 10 min, with little change in the anthocyanin content of the acceptor medium afterwards. For the formulations based on carboxymethyl cellulose and carbomers G7 and G8, the amount of anthocyanins released into the acceptor medium gradually increased, which prolonged the release time of the active compounds. The test for the release of anthocyanins from the semi-solid systems through a hydrophilic membrane revealed that within the first hour, the total amount of anthocyanins released from the modeled gel formulations (G1-G9) was within the range of 6.02%-13.50%. The 1% chitosan (G1) gel formulation released the fastest and highest amount of anthocyanins (70% within 6 h). The other formulations showed a slower release of anthocyanins, and after 6 h, the amount of anthocyanins released from formulations G2-G9 was <57%.

Anti-Obesity Effects of Chitosan and Its Derivatives

The number of obese people in the world is rising, leading to an increase in the prevalence of type 2 diabetes and other metabolic disorders. The search for medications including natural compounds for the prevention of obesity is an urgent task. Chitosan polysaccharide obtained through the deacetylation of chitin, and its derivatives, including short-chain oligosaccharides (COS), have hypolipidemic, anti-inflammatory, anti-diabetic, and antioxidant properties. Chemical modifications of chitosan can produce derivatives with increased solubility under neutral conditions, making them potential therapeutic substances for use in the treatment of metabolic disorders. Multiple studies both in animals and clinical trials have demonstrated that chitosan improves the gut microbiota, restores intestinal barrier dysfunction, and regulates thermogenesis and lipid metabolism. However, the effect of chitosan is rather mild, especially if used for a short periods, and is mostly independent of chitosan's physical characteristics. We hypothesized that the major mechanism of chitosan's anti-obesity effect is its flocculant properties, enabling it to collect the chyme in the gastrointestinal tract and facilitating the removal of extra food. This review summarizes the results of the use of COS, chitosan, and its derivatives in obesity control in terms of pathways of action and structural activity.

Carbohydrate polymer-based carriers for colon targeted delivery of probiotics

Probiotics (PRO) have been recognized for their significant role in promoting human health, particularly in relation to colon-related diseases. The effective delivery of PRO to the colon is a fascinating area of research. Among various delivery materials, carbohydrates have shown great potential as colon-targeted delivery (CTD) carriers for PRO. This review explores the connection between probiotics and colonic diseases, delving into their underlying mechanisms of action. Furthermore, it discusses current strategies for the targeted delivery of active substances to the colon. Unlike other reviews, this work specifically focuses on the utilization of carbohydrates, such as alginate, chitosan, pectin, and other carbohydrates, for probiotic colon-targeted delivery applications. Carbohydrates can undergo hydrolysis at the colonic site, allowing their oligosaccharides to function as prebiotics or as direct functional polysaccharides with beneficial effects. Furthermore, the development of multilayer self-assembled coatings using different carbohydrates enables the creation of enhanced delivery systems. Additionally, chemical modifications of carbohydrates, such as for adhesion and sensitivity, can be implemented to achieve more customized delivery of PRO.

Survivability of freeze- and spray-dried probiotics and their effects on the growth and health performance of broilers

Background and Aim

Many strains of probiotics have been exploited and used as animal dietary supplements for broiler production. The efficacy and survival of probiotics during production may reflect better activities of the probiotics in the host. This study investigated the effects of freeze- and spray-drying on the survivability and properties of probiotics and their ability to improve the growth and health performance of broilers.

Materials and Methods

Probiotic powders of four strains of lactic acid bacteria, Enterococcus faecium CA4, Enterococcus durans CH33, Ligilactobacillus salivarius CH24, Pediococcus acidilactici SH8, and Bacillus subtilis KKU213, were prepared using rice bran/chitosan/carboxy methyl cellulose as the carrier. The survival of each probiotic strain was investigated under stress conditions, including freeze-drying, spray-drying, and simulated gastrointestinal conditions. The body weight gain (BWG) and intestinal histomorphology were determined to assess broiler growth performance.

Results

All dried probiotics yielded a high survival rate during freeze-drying (95.8-98.6%) and spray-drying (94.4-98.2%). In addition, an analysis of the main effect revealed that the effectiveness of freeze-drying was higher than that of spray-drying in minimizing the loss of cell viability. The antimicrobial activity of all immobilized dried probiotic strains against Salmonella was maintained. The immobilized probiotics tolerated a low pH value of 2.0 and 0.5% (w/v) bile salt. Probiotic administration of a mixture of the five dried probiotics to 1-day-old hatched male broilers at early and late ages resulted in potential colonization in the broiler intestine, and enhancements in the BWG, lipid metabolism, and gut health (villus height and cryptal depth) were observed in the probiotic-treated groups.

Conclusion

The administration of three doses of the spray-dried probiotic mixture at days 15, 17, and 19 after hatching was sufficient to achieve long-term growth and health benefits in broilers. This finding might provide a cost-effective alternative to the administration of commonly used antibiotics in broiler production.

Potential Application of Yeast Cell Wall Biopolymers as Probiotic Encapsulants

Biopolymers of yeast cell walls, such as β-glucan, mannoprotein, and chitin, may serve as viable encapsulants for probiotics. Due to its thermal stability, β-glucan is a suitable cryoprotectant for probiotic microorganisms during freeze-drying. Mannoprotein has been shown to increase the adhesion of probiotic microorganisms to intestinal epithelial cells. Typically, chitin is utilized in the form of its derivatives, particularly chitosan, which is derived via deacetylation. Brewery waste has shown potential as a source of β-glucan that can be optimally extracted through thermolysis and sonication to yield up to 14% β-glucan, which can then be processed with protease and spray drying to achieve utmost purity. While laminarinase and sodium deodecyle sulfate were used to isolate and extract mannoproteins and glucanase was used to purify them, hexadecyltrimethylammonium bromide precipitation was used to improve the amount of purified mannoproteins to 7.25 percent. The maximum chitin yield of 2.4% was attained by continuing the acid-alkali reaction procedure, which was then followed by dialysis and lyophilization. Separation and purification of yeast cell wall biopolymers via diethylaminoethyl (DEAE) anion exchange chromatography can be used to increase the purity of β-glucan, whose purity in turn can also be increased using concanavalin-A chromatography based on the glucan/mannan ratio. In the meantime, mannoproteins can be purified via affinity chromatography that can be combined with zymolase treatment. Then, dialysis can be continued to obtain chitin with high purity. β-glucans, mannoproteins, and chitosan-derived yeast cell walls have been shown to promote the survival of probiotic microorganisms in the digestive tract. In addition, the prebiotic activity of β-glucans and mannoproteins can combine with microorganisms to form synbiotics.

Long-Term Application of a Synbiotic Chitosan and Acinetobacter KU011TH Mixture on the Growth Performance, Health Status, and Disease Resistance of Hybrid Catfish (Clarias gariepinus × C. macrocephalus) during Winter

The effects of potential synbiotic chitosan and Acinetobacter KU011TH mixture on growth performance, immune response, and A. hydrophila resistance were investigated for the first time. The control group was fed a basal diet (A), and group B was given the formula B diet that was supplemented with chitosan at 20 mL/kg diet via top dressing. The other synbiotic groups, C, D, and E, were top-dressed with the target probiotics at 1 × 10⁸, 1 × 10⁹, and 1 × 10¹⁰ CFU/kg diet, respectively, and coated with the same concentration of chitosan. Fish were continuously fed the five different feeds for 16 weeks during winter. At the end of the trial, the growth parameters of the test groups did not significantly differ from those of the control (p > 0.05). All the symbiotic-chitosan treatments significantly increased various hematological and serum immune parameters. Moreover, the expression levels of immune-related genes were strongly elevated in the head kidney and spleen, whereas upregulated expression was observed in the liver and whole blood (p < 0.05). Survival analysis indicated that fish in groups B and C showed significantly higher survival (84.33 ± 2.21 and 79.50 ± 6.34%) than those in groups A, D and E (55.33 ± 8.82%-74.00 ± 6.50) (p < 0.05) after injection with A. hydrophila for 14 days.

Characteristics of Chitosan Films with the Bioactive Substances-Caffeine and Propolis

Chitosan is a natural and biodegradable polymer with promising potential for biomedical applications. This study concerns the production of chitosan-based materials for future use in the medical industry. Bioactive substances-caffeine and ethanolic propolis extract (EEP)-were incorporated into a chitosan matrix to increase the bioactivity of the obtained films and improve their mechanical properties. Acetic and citric acids were used as solvents in the production of the chitosan-based films. The obtained materials were characterized in terms of their antibacterial and antifungal activities, as well as their mechanical properties, including tensile strength and elongation at break. Moreover, the chemical structures and surface morphologies of the films were assessed. The results showed that the solution consisting of chitosan, citric acid, caffeine, and EEP exhibited an excellent antiradical effect. The activity of this solution (99.13%) was comparable to that of the standard antioxidant Trolox (92.82%). In addition, the film obtained from this solution showed good antibacterial activity, mainly against Escherichia coli and Enterococcus faecalis. The results also revealed that the films produced with citric acid exhibited higher activity levels against pathogenic bacteria than the films obtained with acetic acid. The antimicrobial effect of the chitosan-based films could be further enhanced by adding bioactive additives such as caffeine and propolis extract. The mechanical tests showed that the solvents and additives used affected the mechanical properties of the films obtained. The film produced from chitosan and acetic acid was characterized by the highest tensile strength value (46.95 MPa) while the chitosan-based film with citric acid showed the lowest value (2.28 MPa). The addition of caffeine and propolis to the film based on chitosan with acetic acid decreased its tensile strength while in the case of the chitosan-based film with citric acid, an increase in strength was observed. The obtained results suggested that chitosan films with natural bioactive substances can be a promising alternative to the traditional materials used in the medical industry, for example, as including biodegradable wound dressings or probiotic encapsulation materials.

Use of whey protein as a natural polymer for the encapsulation of plant biocontrol bacteria: A review

Climate changes, drought, the salinity of water and soil, the emergence of new breeds of pests and pathogens, the industrialization of countries, and environmental contamination are among the factors limiting the production of agricultural products. The use of chemicals (in the form of fertilizers, pesticides and fungicides) to enhance products against biotic and abiotic stresses has limitations. To eliminate the effects of agricultural chemicals, synthetic agrochemicals should be replaced with natural substances and useful microorganisms. To be more effective and efficient, plant biocontrol bacteria need a coating layer around themselves to protect them from adverse conditions. Whey protein, a valuable by-product of the cheese industry, is one of the important natural polymers. Due to its high protein content, safety, and biodegradability, whey can have many applications in agriculture and encapsulation of bacteria to resist pests and plant diseases. This compound is a rich source of amino acids that can activate plant defense systems and defense enzymes. Considering the amazing potentialities of formulation whey protein, this review attends to the efficiency of whey protein as coating layers on fruit and vegetables and in the packaging system to increase the shelf life of agricultural products against phytopathogens.

Microencapsulation of Probiotic Streptococcus salivarius LAB813

Probiotics are living microorganisms that confer a health benefit on the host when administered in adequate amounts. Streptococcus salivarius, a commensal bacterium found in the oral cavity, has been shown to secrete antimicrobial peptides and can be used as probiotics. This study aimed to develop a delivery system for the probiotic LAB813, a novel S. salivarius strain first identified in the laboratory. Probiotics can be delivered and protected through the encapsulation of biomaterials such as polysaccharides. Their biocompatibility, biodegradability, user-friendliness, and ease of access make polysaccharides useful for encapsulating probiotics. Alginate (Alg) and chitosan (Ch) are naturally obtained polysaccharides and, hence, tested for LAB813 encapsulation. An extrusion method of encapsulation was performed to form Alg microcapsules (Alg-LAB813), some of which were coated with Ch (Alg-LAB813-Ch) to provide dual-layered protection. Inhibitory assays of the Alg-LAB813 and Alg-LAB813-Ch microcapsules were assayed against an indicator strain. Alg-LAB813-Ch microcapsules showed superior antibacterial properties compared to Alg-LAB813 microcapsules over 24 h and when subject to temperatures ranging from 4 to 68 °C. In addition, Alg-LAB813-Ch microcapsules retained antibacterial activity for up to 28 days of storage at 4 °C. The strong and sustained inhibitory activities of Ch-coated Alg encapsulated LAB813 signify the potential for their use to improve oral health.

Formulation and Biopharmaceutical Evaluation of Capsules Containing Freeze-Dried Cranberry Fruit Powder

Cranberry fruits are an important source of anthocyanins and anthocyanidins. The aim of the present study was to investigate the effect of excipients on the solubility of cranberry anthocyanins and their dissolution kinetics as well as on the disintegration time of the capsules. Selected excipients (sodium carboxymethyl cellulose, beta-cyclodextrin and chitosan) were found to affect the solubility and release kinetics of anthocyanins in freeze-dried cranberry powder. Capsule formulations N1-N9 had a disintegration time of less than 10 min, and capsule formulation N10 containing 0.200 g of freeze-dried cranberry powder, 0.100 g of Prosolv (combination of microcrystalline cellulose and colloidal silicon dioxide), and 0.100 g of chitosan had a capsule disintegration time of over 30 min. The total amount of anthocyanins released into the acceptor medium ranged from 1.26 ± 0.06 mg to 1.56 ± 0.03 mg. Capsule dissolution test data showed that the time to release into the acceptor medium was statistically significantly longer for the chitosan-containing capsule formulations compared to the control capsules (p < 0.05). Freeze-dried cranberry fruit powder is a potential source of anthocyanin-rich dietary supplements, and the choice of excipient chitosan could be a suitable solution in capsule formulations providing greater anthocyanin stability and modified release in the gastrointestinal tract.

Development of engineered probiotics with tailored functional properties and their application in food science

The potential health benefits of probiotics may not be cognized because of the substantial curtailment in their viability during food storage and passage through the gastrointestinal system. Intestinal flora composition, and resistance against pathogens are among the health benefits associated with probiotic consumption. In the gastric environment, pH 2.0, probiotics dramatically lose their viability during the transit through the gastrointestinal system. The challenge remains to maintain cell viability until it reaches the large intestine. In extreme conditions, such as a decrease in pH or an increase in temperature, encapsulation technology can enhance the viability of probiotics. Probiotic bacterial strains can be encapsulated in a variety of ways. The methods are broadly systematized into two categories, liquid and solid delivery systems. This review emphasizes the technology used in the research and commercial sectors to encapsulate probiotic cells while keeping them alive and the food matrix used to deliver these cells to consumers.

Graphical abstract

Role of wound microbiome, strategies of microbiota delivery system and clinical management

Delayed wound healing is one of the most global public health threats affecting nearly 100 million people each year, particularly the chronic wounds. Many confounding factors such as aging, diabetic disease, medication, peripheral neuropathy, immunocompromises or arterial and venous insufficiency hyperglycaemia are considered to inhibit wound healing. Therapeutic approaches for slow wound healing include anti-infection, debridement and the use of various wound dressings. However, the current clinical outcomes are still unsatisfied. In this review, we discuss the role of skin and wound commensal microbiota in the different healing stages, including inflammation, cell proliferation, re-epithelialization and remodelling phase, followed by multiple immune cell responses to commensal microbiota. Current clinical management in treating surgical wounds and chronic wounds was also reviewed together with potential controlled delivery systems which may be utilized in the future for the topical administration of probiotics and microbiomes. This review aims to introduce advances, novel strategies, and pioneer ideas in regulating the wound microbiome and the design of controlled delivery systems.

Biotechnological advancements towards water, food and medical healthcare: A review

The global health status is highly affected by the growing pace of urbanization, new lifestyles, climate changes, and resource exploitation. Modern technologies pave a promising way to deal with severe concerns toward sustainable development. Herein, we provided a comprehensive review of some popular biotechnological advancements regarding the progress achieved in water, food, and medicine, as the most substantial fields related to public health. The emergence of novel organic/inorganic materials has brought about significant improvement in conventional water treatment techniques, anti-fouling approaches, anti-microbial agents, food processing, biosensors, drug delivery systems, and implants. Particularly, a growing interest has been devoted to nanomaterials and their application for developing novel structures or improving the characteristics of standard components. Also, bioinspired materials have been widely used to improve the performance, efficiency, accuracy, stability, safety, and cost-effectiveness of traditional systems. On the other side, the fabrication of innovative devices for precisely monitoring and managing various ecosystem and human health issues is of great importance. Above all, exceptional advancements in designing ion-selective electrodes (ISEs), microelectromechanical systems (MEMs), and implantable medical devices have altered the future landscape of environmental and biomedical research. This review paper aimed to shed light on the wide-ranging materials and devices that have been developed for health applications and mainly focused on the impact of nanotechnology in this field.

Precise oral delivery systems for probiotics: A review

Probiotics have several health benefits to the host. However, low pH in the stomach, various digestive enzymes and bile salts in the intestine threaten their viability and function. Thus, probiotics need to be protected during gastric transit to address challenges associated with low viability and impaired function. At present, probiotic delivery systems with different trigger mechanisms have been constructed to successfully introduce numerous high-viability probiotics to the intestine. On this basis, the application of non-targeted/targeted probiotic delivery systems in different gut microenvironment and the adjuvant therapeutic effect of probiotic delivery systems on other disease were discussed in detail. It is important to also note that most of the current studies in this area focused on non-targeted probiotic delivery systems. Moreover, changes in intestinal microenvironment under disease state and discontinuous distribution of disease site limit their development. Thus, emphasis were made on the optimization of non-targeted probiotic delivery systems and the necessity of designing more precisely targeted ones.

Efficacy of Microencapsulated Probiotic as Adjunct Therapy on Resolution of Diarrhea, Copper-Zinc Homeostasis, Immunoglobulins, and Inflammatory Markers in Serum of Spontaneous Rotavirus-Infected Diarrhoetic Calves

The objective of this study was to assess the efficacy of a microencapsulated probiotic as an adjunct therapy in rotavirus-positive diarrhea of neonatal calves that received supportive treatment or supportive along with microencapsulated probiotic treatment, for 5 days. We examined whether microencapsulated Lactobacillus acidophilus NCDC15 probiotic treatment in rotavirus-infected diarrhoetic calves led to faster resolution of diarrhea, amelioration of zinc-copper imbalance, improved the immunoglobulin A and immunoglobulin G, and decreased the inflammatory markers in serum. Calves with rotavirus-positive diarrhea < 4-week age and fecal scores ≥ 2 were randomly assigned into two groups. The supportive along with microencapsulated probiotic treatment significantly (p < 0.05) increased zinc and immunoglobulin A concentrations and decreased copper, tumor necrosis factor-α, and nitric oxide level in serum on days 3 and 5 from pretreatment values; the immunoglobulin G concentration was elevated (p < 0.05) on day 5. The mean resolution time of abnormal fecal score was 5.3 and 3.3 days in supportive treatment and supportive along with microencapsulated probiotic groups, respectively, in log-rank Mantel-Cox test. The calves in the supportive along with microencapsulated probiotic treatment group had faster resolution of diarrhea than supportive treatment group in Dunn's multiple comparisons test. This study demonstrates that supportive treatment along with microencapsulated probiotic administered to naturally rotavirus-infected diarrhoetic calves at onset of diarrhea led to faster resolution of diarrhea, improved zinc and immunoglobulin levels, and decreased the inflammatory parameters in serum of rotavirus-infected diarrhoetic calves.

Evaluation of Two Active System Encapsulant Matrices with Quercetin and Bacillus clausii for Functional Foods

Currently, demand for functional foods is increasing in the public interest in order to improve life expectations and general health. Food matrices containing probiotic microorganisms and active compounds encapsulated into carrier agents are essential in this context. Encapsulation via the lyophilisation method is widely used because oxidation reactions that affect physicochemical and nutritional food properties are usually avoided. Encapsulated functional ingredients, such as quercetin and Bacillus clausii, using two carrier agents' matrices-I [inulin (IN), lactose (L) and maltodextrin (MX)] and II [arabic (A), guar (G), and xanthan (X) gums)]-are presented in this work. A D-optimal procedure involving 59 experiments was designed to evaluate each matrix's yield, viability, and antioxidant activity (AA). Matrix I (33.3 IN:33.3 L:33.3 MX) and matrix II (33.3 A:33.3 G:33.3 X) exhibited the best yield; viability of 9.7 log10 CFU/g and 9.73 log10 CFU/g was found in matrix I (using a ratio of 33.3 IN:33.3 L:33.3 MX) and matrix II (50 G:50 X), respectively. Results for the antioxidant capacity of matrix I (100 IN:0 L:0M X) and matrix II (0 A:50 G:50 X) were 58.75 and 55.54 (DPPH* scavenging activity (10 µg/mL)), respectively. Synergy between matrices I and II with use of 100IN:0L:OMX and 0A:50G:50X resulted in 55.4 log10 CFU/g viability values; the antioxidant capacity was 9. 52 (DPPH* scavenging activity (10 µg/mL). The present work proposes use of a carrier agent mixture to produce a functional ingredient with antioxidant and probiotic properties that exceed the minimum viability, 6.0 log10 CFU/g, recommended by the FAO/WHO (2002) to be probiotic, and that contributes to the recommended daily quercetin intake of 10-16 mg/day or inulin intake of 10-20 g/day and dietary fibre intake of 25-38 g per day.

Gut Dysbiosis and Diabetic Foot Ulcer: Role of Probiotics

Diabetic foot ulcer (DFU) is a multifactorial disease and one of the complications of diabetes. The global burden of DFU in the health sector is increasing at a tremendous rate due to its cost management related to hospitalization, medical costs and foot amputation. Hence, to manage DFU/DWs, various attempts have been made, including treating wounds systematically/topically using synthetic drugs, herbal drugs, or tissue engineering based surgical dressings. However, less attention has been paid to the intrinsic factors that are also the leading cause of diabetes mellitus (DM) and its complications. One such factor is gut dysbiosis, which is one of the major causes of enhancing the counts of Gram-negative bacteria. These bacteria produce lipopolysaccharides, which are a major contributing factor toward insulin resistance and inflammation due to the generation of oxidative stress and immunopathy. These all lead to DM and DFU. Probiotics are the commercial form of beneficial gut microbes that are taken as nutraceuticals by people of all ages to improve gut immunity and prevent gut dysbiosis. However, the role of probiotics has been less explored in the management of DFU. Hence, the therapeutic potential of probiotics in managing DFU is fully described in the current review. This report covers the linkage between gut dysbiosis and DFU, sources of probiotics, the mechanisms of probiotics in DW healing, and the impact of probiotic supplementation in treating DFU. In addition, techniques for the stabilization of probiotics, market status, and patents related to probiotics have been also covered. The relevant data were gathered from PubMed, Scopus, Taylor and Francis, Science Direct, and Google Scholar. Our systematic review discusses the utilization of probiotic supplementation as a nutraceutical for the management of DFU.

Probiotic Properties of Lactobacillus fermentum InaCC B1295 Encapsulated by Cellulose Microfiber from Oil Palm Empty Fruit Bunches

This study aims at an in vitro characterization of the acid and bile tolerance of Lactobacillus fermentum InaCC B1295 (LFB1295) encapsulated with hydrogel cellulose microfibers (CMF) from oil palm empty fruit bunches (OPEFBs). The viability at different storage temperatures was assessed. The experimental design used in this research was an in vitro trial. The microencapsulated probiotic was stored at 25 °C and 4 °C for 28 days. LFB1295 encapsulated with cellulose microfiber hydrogel from OPEFB showed a stable viability of probiotic bacteria at pH 2 and 0.5% (m/v) oxgall. In addition, the microencapsulation maintained the viability at 25 °C and 4 °C at 0, 14, and 28 days. The characterization of the encapsulant CMF-OPEFB showed that the thickness of CMF was in the range of 5–15 μm, and XRD patterns showed that CMF was of the cellulose I type with a crystallinity index of 77.08%. Based on its resistance to hydrogen peroxide, ability to scavenge DPPH radicals, and activity in scavenging hydroxyl radicals, LFB1295 encapsulated with CMF hydrogel of OPEFB exhibits antioxidant properties as good as the scavenging ability of DPPH radicals with IC50 of 36.880, 188.530, and 195.358 µg/mL, respectively, during storage for 0, 14, and 28 days at room and refrigerated temperature. Furthermore, hydroxyl radicals (HR)-scavenging activity showed an increased inhibition along with the increasing concentration of the Fenton reaction and decreasing concentration of cell-free supernatant (CFS) during storage time. In vitro safety tests, including hemolytic activity, biogenic amines, cytolysin, and gelatinase production, showed that the encapsulated LFB1295 was safe to use as a probiotic. The results of the inhibitory activity against hydrogen peroxide LFB1295 show that the higher the concentration of H2O2, the lower the inhibition value during 28 days of storage. Based on the storage temperature, the inhibition of LAB against H2O2 based on different storage temperatures showed a better level of the inhibition at cold temperatures compared to at room temperature.

Enhanced survival of Lacticaseibacillus rhamnosus in simulated gastrointestinal conditions using layer-by-layer encapsulation

OBJECTIVE

The release behavior of Lacticaseibacillus rhamnosus from single bilayer microcapsules of alginate-chitosan (AC) and its double bilayer (ACAC) was investigated in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). Methods Multilayer polyelectrolyte AC microcapsules were fabricated using the layer-by-layer (LbL) self-assembly technique through electrostatic interactions. Results AC and ACAC microcapsules kept their integrity and mechanical stability in simulated gastric conditions. Bacterial cells remained inside microcapsules in SGF and dissolution of microcapsules was observed in SIF. To improve the bacterial survivability, L. rhamnosus was co-encapsulated in a double bilayer of AC hydrogels with calcium carbonate as an antacid agent. Conclusions The LbL self-assembly technology provides stable and target release for ACAC microcapsules. Therefore, the double bilayer polyelectrolyte microcapsules have a remarkable potential for successful application in the targeted and controlled delivery of different probiotics and drugs.

Coating bacteria for anti-tumor therapy

Therapeutic bacteria have shown great potential on anti-tumor therapy. Compared with traditional therapeutic strategy, living bacteria present unique advantages. Bacteria show high targeting and great colonization ability in tumor microenvironment with hypoxic and nutritious conditions. Bacterial-medicated antitumor therapy has been successfully applied on mouse models, but the low therapeutic effect and biosafe limit its application on clinical treatment. With the development of material science, coating living bacteria with suitable materials has received widespread attention to achieve synergetic therapy on tumor. In this review, we summarize various materials for coating living bacteria in cancer therapy and envision the opportunities and challenges of bacteria-medicated antitumor therapy.

Preparation and Characteristics of Alginate Microparticles for Food, Pharmaceutical and Cosmetic Applications

Alginates are the most widely used natural polymers in the pharmaceutical, food and cosmetic industries. Usually, they are applied as a thickening, gel-forming and stabilizing agent. Moreover, the alginate-based formulations such as matrices, membranes, nanospheres or microcapsules are often used as delivery systems. Alginate microparticles (AMP) are biocompatible, biodegradable and nontoxic carriers, applied to encapsulate hydrophilic active substances, including probiotics. Here, we report the methods most frequently used for AMP production and encapsulation of different actives. The technological parameters important in the process of AMP preparation, such as alginate concentration, the type and concentration of other reagents (cross-linking agents, oils, emulsifiers and pH regulators), agitation speed or cross-linking time, are reviewed. Furthermore, the advantages and disadvantages of alginate microparticles as delivery systems are discussed, and an overview of the active ingredients enclosed in the alginate carriers are presented.

Polysaccharide-Based Edible Gels as Functional Ingredients: Characterization, Applicability, and Human Health Benefits

Nowadays, edible materials such as polysaccharides have gained attention due to their valuable attributes, especially gelling property. Polysaccharide-based edible gels (PEGs) can be classified as (i) hydrogels, (ii) oleogels and bigels, (iii) and aerogels, cryogels and xerogels, respectively. PEGs have different characteristics and benefits depending on the functional groups of polysaccharide chains (e.g., carboxylic, sulphonic, amino, methoxyl) and on the preparation method. However, PEGs are found in the incipient phase of research and most studies are related to their preparation, characterization, sustainable raw materials, and applicability. Furthermore, all these aspects are treated separately for each class of PEG, without offering an overview of those already obtained PEGs. The novelty of this manuscript is to offer an overview of the classification, definition, formulation, and characterization of PEGs. Furthermore, the applicability of PEGs in the food sector (e.g., food packaging, improving food profile agent, delivery systems) and in the medical/pharmaceutical sector is also critically discussed. Ultimately, the correlation between PEG consumption and polysaccharides properties for human health (e.g., intestinal microecology, "bridge effect" in obesity, gut microbiota) are critically discussed for the first time. Bigels may be valuable for use as ink for 3D food printing in personalized diets for human health treatment. PEGs have a significant role in developing smart materials as both ingredients and coatings and methods, and techniques for exploring PEGs are essential. PEGs as carriers of bioactive compounds have a demonstrated effect on obesity. All the physical, chemical, and biological interactions among PEGs and other organic and inorganic structures should be investigated.

Potential synbiotic effects of a Bacillus mixture and chitosan on growth, immune responses and VP(AHPND) resistance in Pacific white shrimp (Litopenaeus vannamei, Boone, 1931)

The potential synbiotic effects of a Bacillus mixture and chitosan on growth, immune responses and disease resistance against Vibrio parahaemolyticus, the causative agent of acute hepatopancreatic necrosis disease (AHPND) in Pacific white shrimp, were intensively investigated. Three effective strains of Bacillus amyloliquefaciens (A), Bacillus pumilus (P) and Bacillus subtilis (S) were mixed in pairs at a ratio of 5 × 10⁸:5 × 10⁸ CFU/kg diet and coated with the prebiotic chitosan (C) at a concentration of 20 mL/kg diet. Five different feed treatments were used to feed experimental shrimp for 5 weeks: control (control, no synbiotics), chitosan (coat, C) and the synbiotic treatments PAC, PSC and ASC. At week 5, the final length, final weight gain, weight gain, length, average daily gain, specific growth rate and feed conversion ratio, measured as growth parameters, were significantly upregulated in the PSC and ASC groups compared with the control and coat groups (P < 0.05). This result was consistent with the expression analysis of two growth-related genes (Rap-2a and GF-II) in the hepatopancreas and intestines of treated shrimp, as determined using qRT-PCR. The prebiotic chitosan and synbiotics PAC, PSC and ASC strongly induced significant differences in the expression of the Rap-2a and GF-II genes in the target organs compared with the expression in the control group at various time points (P < 0.05). Additionally, application of the synbiotic treatments also significantly enhanced the hepatopancreas characteristics and epithelial and intestinal wall thicknesses of the shrimp compared with the control. Interestingly, all the synbiotic treatments elevated phagocytic activity significantly at weeks 3 and 5 compared with that in the other groups. qRT-PCR analysis of immune-related genes also indicated that the prebiotic group and all synbiotic groups showed strong expression of anti-lipopolysaccharide (ALF) and prophenoloxidase (proPO) genes in the intestine. Finally, the synbiotic groups PAC, PSC and ASC exhibited stronger VP_AHPND resistance at 120 h after exposure than the chitosan coat and control groups, with survival rates of 41.7 ± 11.55, 41.7 ± 0.00, 52.8 ± 5.77, 30.6 ± 15.28 and 22.2 ± 5.77%, respectively (P < 0.05). Based on the obtained information, all synbiotics were recommended for improved growth and immune responses, while ASC was the best for disease resistance against VP_AHPND in Pacific white shrimp.

Strategies to Combat Caries by Maintaining the Integrity of Biofilm and Homeostasis during the Rapid Phase of Supragingival Plaque Formation

Bacteria in the oral cavity, including commensals and opportunistic pathogens, are organized into highly specialized sessile communities, coexisting in homeostasis with the host under healthy conditions. A dysbiotic environment during biofilm evolution, however, allows opportunistic pathogens to become the dominant species at caries-affected sites at the expense of health-associated taxa. Combining tooth brushing with dentifrices or rinses combat the onset of caries by partially removes plaque, but resulting in the biofilm remaining in an immature state with undesirables’ consequences on homeostasis and oral ecosystem. This leads to the need for therapeutic pathways that focus on preserving balance in the oral microbiota and applying strategies to combat caries by maintaining biofilm integrity and homeostasis during the rapid phase of supragingival plaque formation. Adhesion, nutrition, and communication are fundamental in this phase in which the bacteria that have survived these adverse conditions rebuild and reorganize the biofilm, and are considered targets for designing preventive strategies to guide the biofilm towards a composition compatible with health. The present review summarizes the most important advances and future prospects for therapies based on the maintenance of biofilm integrity and homeostasis as a preventive measure of dysbiosis focused on these three key factors during the rapid phase of plaque formation.

Mathematical Modeling and Optimization of Lactobacillus Species Single and Co-Culture Fermentation Processes in Wheat and Soy Dough Mixtures

To improve food production via fermentation with co-cultures of microorganisms (e.g., multiple lactic acid bacteria-LAB strains), one must fully understand their metabolism and interaction patterns in various conditions. For example, LAB can bring added quality to bread by releasing several bioactive compounds when adding soy flour to wheat flour, thus revealing the great potential for functional food development. In the present work, the fermentation of three soy and wheat flour mixtures is studied using single cultures and co-cultures of Lactobacillus plantarum and Lactobacillus casei. Bio-chemical processes often require a significant amount of time to obtain the optimal amount of final product; creating a mathematical model can gain important information and aids in the optimization of the process. Consequently, mathematical modeling is used to optimize the fermentation process by following these LAB’s growth kinetics and viability. The present work uses both multiple regression and artificial neural networks (ANN) to obtain the necessary mathematical model, useful in both prediction and process optimization. The main objective is to find a model with optimal performances, evaluated using an ANOVA test. To validate each obtained model, the simulation results are compared with the experimental data.

Designing food for the elderly: the critical impact of food structure

Ageing is an unavoidable progressive process causing many changes of the individual life. However, if faced in an efficient way, living longer in a healthy status could be an opportunity for all. In this context, food consumption and dietary patterns are pivotal factors in promoting active and healthy ageing. The development of food products tailored for the specific needs of the elderly might favour the fulfilment of nutritionally balanced diets, while reducing the consequences of malnutrition. To this aim, the application of a food structure design approach could be particularly profitable, being food structure responsible to the final functionalities of food products. In this narrative review, the physiological changes associated to food consumption occurring during ageing were firstly discussed. Then, the focus shifted to the possible role of food structure in delivering target functionalities, considering food acceptability, digestion of the nutrients, bioactive molecules and probiotic bacteria.

Layer-by-Layer Coating of Single-Cell Lacticaseibacillus rhamnosus to Increase Viability Under Simulated Gastrointestinal Conditions and Use in Film Formation

Probiotics and prebiotics are widely used as functional food ingredients. Viability of probiotics in the food matrix and further in the digestive system is still a challenge for the food industry. Different approaches were used to enhance the viability of probiotics including microencapsulation and layer-by-layer cell coating. The of aim of this study was to evaluate the viability of coated Lacticaseibacillus rhamnosus using a layer-by-layer (LbL) technique with black seed protein (BSP) extracted from Nigella sativa defatted seeds cakes (NsDSC), as a coating material, with alginate, inulin, or glucomannan, separately, and the final number of coating layers was 3. The viable cell counts of the plain and coated L. rhamnosus were determined under sequential simulated gastric fluid (SGF) for 120 min and simulated intestinal fluid (SIF) for 180 min. Additionally, the viability after exposure to 37, 45, and 55°C for 30 min was also determined. Generally, the survivability of coated L. rhamnosus showed significant (p ≤ 0.05) improvement (<4, 3, and 1.5 logs reduction for glucomannan, alginate and inulin, respectively) compared with plain cells (∼6.7 log reduction) under sequential exposure to SGF and SIF. Moreover, the cells coated with BSP and inulin showed the best protection for L. rhamnosus under high temperatures. Edible films prepared with pectin with LbL-coated cells showed significantly higher values in their tensile strength (TS) of 50% and elongation at the break (EB) of 32.5% than pectin without LbL-coated cells. The LbL technique showed a significant protection of probiotic cells and potential use in food application.