Lipid Self-Assemblies and Nanostructured Emulsions for Cosmetic Formulations

A Versatile Approach to Stabilize Liquid-Liquid Interfaces using Surfactant Self-Assembly

Stabilizing liquid-liquid interfaces, whether between miscible or immiscible liquids, is crucial for a wide range of applications, including energy storage, microreactors, and biomimetic structures. In this study, a versatile approach for stabilizing the water-oil interface is presented using the morphological transitions that occur during the self-assembly of anionic, cationic, and nonionic surfactants mixed with fatty acid oils. The morphological transitions underlying this approach are characterized and extensively studied through small-angle X-ray scattering (SAXS), rheometry, and microscopy techniques. Dissipative particle dynamics (DPD) as a simulation tool is adopted to investigate these morphological transitions both in the equilibrium ternary system as well as in the dynamic condition of the water-oil interface. Such a versatile strategy holds promise for enhancing applications such as liquid-in-liquid 3D printing. Moreover, it has the potential to revolutionize a wide range of fields where stabilizing liquid-liquid interfaces not only offers unprecedented opportunities for fine-tuning nanostructural morphologies but also imparts interesting practical features to the resulting liquid shapes. These features include perfusion capabilities, self-healing, and porosity, which could have significant implications for various industries.

Liposomes to Cubosomes: The Evolution of Lipidic Nanocarriers and Their Cutting-Edge Biomedical Applications

Lipidic nanoparticles have undergone extensive research toward the exploration of their diverse therapeutic applications. Although several liposomal formulations are in the clinic (e.g., DOXIL) for cancer therapy, there are many challenges associated with traditional liposomes. To address these issues, modifications in liposomal structure and further functionalization are desirable, leading to the emergence of solid lipid nanoparticles and the more recent liquid lipid nanoparticles. In this context, "cubosomes", third-generation lipidic nanocarriers, have attracted significant attention due to their numerous advantages, including their porous structure, structural adaptability, high encapsulation efficiency resulting from their extensive internal surface area, enhanced stability, and biocompatibility. Cubosomes offer the potential for both enhanced cellular uptake and controlled release of encapsulated payloads. Beyond cancer therapy, cubosomes have demonstrated effectiveness in wound healing, antibacterial treatments, and various dermatological applications. In this review, the authors provide an overview of the evolution of lipidic nanocarriers, spanning from conventional liposomes to solid lipid nanoparticles, with a special emphasis on the development and application of cubosomes. Additionally, it delves into recent applications and preclinical trials associated with cubosome formulations, which could be of significant interest to readers from backgrounds in nanomedicine and clinicians.

Optimization of water/oil emulsion preparation: Impact of time, speed, and homogenizer type on droplet size and dehydration efficiency

Due to their distinctive physical and chemical properties, emulsions are widely used in various industries such as pharmaceuticals, cosmetics, food, energy, and oil. Emulsion preparation differs from one application to another due to the effect of multiple parameters that can control droplet size and stability. However, there is a lack of fundamental understanding of the effect of emulsion preparation on its stability and performance. The emulsion preparation protocols can directly affect dehydration efficiency and stability. Herein, we report the influence of preparation conditions on the properties of the formed emulsions; we investigated the effect of mixing time, speed, and mixer type on the synthetic crude oil emulsion's droplet size and dehydration efficiency.

Lipid-based liquid crystalline materials in electrochemical sensing and nanocarrier technology

Some biologically active substances are unstable and poorly soluble in aqueous media, at the same time exhibiting low bioavailability. The incorporation of these biologically active compounds into the structure of a lipid-based lyotropic liquid crystalline phase or nanoparticles can increase or improve their stability and transport properties, subsequent bioavailability, and applicability in general. The aim of this short overview is (1) to clarify the principle of self-assembly of lipidic amphiphilic molecules in an aqueous environment and (2) to present lipidic bicontinuous cubic and hexagonal phases and their current biosensing (with a focus on electrochemical protocols) and biomedical applications.

Polymeric Nanosystems Applied for Metal-Based Drugs and Photosensitizers Delivery: The State of the Art and Recent Advancements

Nanotechnology-based approaches for targeting the delivery and controlled release of metal-based therapeutic agents have revealed significant potential as tools for enhancing the therapeutic effect of metal-based agents and minimizing their systemic toxicities. In this context, a series of polymer-based nanosized systems designed to physically load or covalently conjugate metal-based therapeutic agents have been remarkably improving their bioavailability and anticancer efficacy. Initially, the polymeric nanocarriers were applied for platinum-based chemotherapeutic agents resulting in some nanoformulations currently in clinical tests and even in medical applications. At present, these nanoassemblies have been slowly expanding for nonplatinum-containing metal-based chemotherapeutic agents. Interestingly, for metal-based photosensitizers (PS) applied in photodynamic therapy (PDT), especially for cancer treatment, strategies employing polymeric nanocarriers have been investigated for almost 30 years. In this review, we address the polymeric nanocarrier-assisted metal-based therapeutics agent delivery systems with a specific focus on non-platinum systems; we explore some biological and physicochemical aspects of the polymer–metallodrug assembly. Finally, we summarize some recent advances in polymeric nanosystems coupled with metal-based compounds that present potential for successful clinical applications as chemotherapeutic or photosensitizing agents. We hope this review can provide a fertile ground for the innovative design of polymeric nanosystems for targeting the delivery and controlled release of metal-containing therapeutic agents.

Lyotropic Liquid Crystalline Nanostructures as Drug Delivery Systems and Vaccine Platforms

Lyotropic liquid crystals result from the self-assembly process of amphiphilic molecules, such as lipids, into water, being organized in different mesophases. The non-lamellar formed mesophases, such as bicontinuous cubic (cubosomes) and inverse hexagonal (hexosomes), attract great scientific interest in the field of pharmaceutical nanotechnology. In the present review, an overview of the engineering and characterization of non-lamellar lyotropic liquid crystalline nanosystems (LLCN) is provided, focusing on their advantages as drug delivery nanocarriers and innovative vaccine platforms. It is described that non-lamellar LLCN can be utilized as drug delivery nanosystems, as well as for protein, peptide, and nucleic acid delivery. They exhibit major advantages, including stimuli-responsive properties for the “on demand” drug release delivery and the ability for controlled release by manipulating their internal conformation properties and their administration by different routes. Moreover, non-lamellar LLCN exhibit unique adjuvant properties to activate the immune system, being ideal for the development of novel vaccines. This review outlines the recent advances in lipid-based liquid crystalline technology and highlights the unique features of such systems, with a hopeful scope to contribute to the rational design of future nanosystems.

Bringing hydrogel-based craniofacial therapies to the clinic

This review explores the evolution of the use of hydrogels for craniofacial soft tissue engineering, ranging in complexity from acellular injectable fillers to fabricated, cell-laden constructs with complex compositions and architectures. Addressing both in situ and ex vivo approaches, tissue restoration secondary to trauma or tumor resection is discussed. Beginning with relatively simple epithelia of oral mucosa and gingiva, then moving to more functional units like vocal cords or soft tissues with multilayer branched structures, such as salivary glands, various approaches are presented toward the design of function-driven architectures, inspired by native tissue organization. Multiple tissue replacement paradigms are presented here, including the application of hydrogels as structural materials and as delivery platforms for cells and/or therapeutics. A practical hierarchy is proposed for hydrogel systems in craniofacial applications, based on their material and cellular complexity, spatial order, and biological cargo(s). This hierarchy reflects the regulatory complexity dictated by the Food and Drug Administration (FDA) in the United States prior to commercialization of these systems for use in humans. The wide array of available biofabrication methods, ranging from simple syringe extrusion of a biomaterial to light-based spatial patterning for complex architectures, is considered within the history of FDA-approved commercial therapies. Lastly, the review assesses the impact of these regulatory pathways on the translational potential of promising pre-clinical technologies for craniofacial applications. STATEMENT OF SIGNIFICANCE: While many commercially available hydrogel-based products are in use for the craniofacial region, most are simple formulations that either are applied topically or injected into tissue for aesthetic purposes. The academic literature previews many exciting applications that harness the versatility of hydrogels for craniofacial soft tissue engineering. One of the most exciting developments in the field is the emergence of advanced biofabrication methods to design complex hydrogel systems that can promote the functional or structural repair of tissues. To date, no clinically available hydrogel-based therapy takes full advantage of current pre-clinical advances. This review surveys the increasing complexity of the current landscape of available clinical therapies and presents a framework for future expanded use of hydrogels with an eye toward translatability and U.S. regulatory approval for craniofacial applications.

Lipid-based emulsion drug delivery systems - a comprehensive review

Lipid-based emulsion system - a subcategory of emulsion technology, has emerged as an enticing option to improve the solubility of the steadily rising water-insoluble candidates. Along with enhancing solubility, additional advantages such as improvement in permeability, protection against pre-systemic metabolism, ease of manufacturing, and easy to scale-up have made lipid-based emulsion technology very popular among academicians and manufacturers. The present article provides a comprehensive review regarding various critical properties of lipid-based emulsion systems, such as microemulsion, nanoemulsion, SMEDDS (self microemulsifying drug delivery system), and SNEDDS (self nanoemulsifying drug delivery system). The present article also explains in detail the similarities and differences between them, the stabilization mechanism, methods of preparation, excipients used to prepare them, and evaluation techniques. Subtle differences between nearly related terminologies such as microemulsion and nanoemulsion, SMEDDS, and SNEDDS are also explained in detail to clarify the basic differences. The present article also gives in-depth information regarding the chemical structure of various lipidic excipients, various possible chemical modifications to modify their inherent properties, and their regulatory status for rational selection.

Heparin: A simplistic repurposing to prevent SARS-CoV-2 transmission in light of its in-vitro nanomolar efficacy

The world is currently facing a novel coronavirus (SARS-CoV-2) pandemic. The greatest threat that is disrupting the normal functioning of society is the exceptionally high species independent transmission. Drug repurposing is understood to be the best strategy to immediately deploy well-characterized agents against new pathogens. Several repurposable drugs are already in evaluation for determining suitability to treat COVID-19. One such promising compound includes heparin, which is widely used in reducing thrombotic events associated with COVID-19 induced pathology. As part of identifying target-specific antiviral compounds among FDA and world-approved libraries using high-throughput virtual screening (HTVS), we previously evaluated top hits for anti-SARS-CoV-2 activity. Here, we report results of highly efficacious viral entry blocking properties of heparin (IC50 = 12.3 nM) in the complete virus assay, and further, propose ways to use it as a potential transmission blocker. Exploring further, our in-silico analysis indicated that the heparin interacts with post-translational glycoconjugates present on spike proteins. The patterns of accessible spike-glycoconjugates in open and closed states are completely contrasted by one another. Heparin-binding to the open conformation of spike structurally supports the state and may aid ACE2 binding as reported with cell surface-bound heparan sulfate. We also studied spike protein mutant variants' heparin interactions for possible resistance. Based on available data and optimal absorption properties by the skin, heparin could potentially be used to block SARS-CoV-2 transmission. Studies should be designed to exploit its nanomolar antiviral activity to formulate heparin as topical or inhalation-based formulations, particularly on exposed areas and sites of primary viremia e.g. ACE2 rich epithelia of the eye (conjunctiva/lids), nasal cavity, and mouth.

Bending elastic modulus of a polymer-doped lyotropic lamellar phase

The effect of inserting a neutral water-soluble adsorbing polymer on the flexibility of amphiphilic bilayers in a lamellar phase is investigated. The L_α system is a stack of charged undulating bilayers composed of sodium dodecyl sulfate (SDS) and octanol separated by aqueous solutions of polyethylene glycol (PEG). The mean bending elastic modulus κ is determined from the quadrupole splittings in the solid state NMR spectra of the perdeuterated octanol chains embedded in the membranes that undergo collective fluctuations. Parameters for describing the membrane behavior (bilayer thickness, elastic compressibility modulus, order parameter) are obtained by supplementing the NMR data with complementary experiments (x-ray scattering), NMR spectral simulations, and theoretical considerations. A fairly complete picture of the membrane rigidity emerges for any location in the lamellar phase thanks to a broad sweep of the lamellar domain by systematically varying the membrane fraction along dilution lines as well as the polymer composition. The most remarkable result is the difference between dilute and semi-dilute regimes. In the dilute PEG solution, no (or slight positive shift) polymer contribution to the rigidity curvature of the layered system is noted within the experimental resolution (≤0.3 k_BT) and κ remains around 2.7 k_BT. In contrast, the membrane rigidity increases steadily upon polymer addition once the crossover concentration c_p* is exceeded, amounting to a 60% increase in κ at polymer concentration 2.5 c_p* in the aqueous interlayers. These results are discussed with regard to the theoretical expectation of membrane rigidification upon irreversible polymer adsorption.

Saddle-curvature instability of lipid bilayer induced by amphipathic peptides: a molecular model

Amphipathic peptides that partition into lipid bilayers affect the curvature elastic properties of their host. Some of these peptides are able to shift the Gaussian modulus to positive values, thus triggering an instability with respect to the formation of saddle curvatures. To characterize the generic aspects of the underlying mechanism, we employ a molecular lipid model that accounts for the interfacial tension between the polar and apolar regions of the membrane, for interactions between the lipid headgroups, and for the energy to stretch or compress the hydrocarbon chains. Peptides are modeled as cylinders that partition into the host membrane in a parallel orientation where they diminish the space available to the lipid headgroups and chains. The penetration depth into the membrane is determined by the angular size of the peptide's hydrophilic region. We demonstrate that only peptides with a small angular size of their hydrophilic region have an intrinsic tendency to render the Gaussian modulus more positive, and we identify conditions at which the Gaussian modulus adopts a positive sign upon increasing the peptide concentration. Our model allows us to also incorporate electrostatic interactions between cationic peptides and anionic lipids on the level of the linear Debye-Hückel model. We show that electrostatic interactions tend to shift the Gaussian modulus toward more positive values. Steric and electrostatic lipid-peptide interactions jointly decrease the effective interaction strength in the headgroup region of the host membrane thus suggesting a generic mechanisms of how certain amphipathic peptides are able to induce the formation of saddle curvatures.

Self-assembly of Organic Nanomaterials and Biomaterials: The Bottom-Up Approach for Functional Nanostructures Formation and Advanced Applications

In this paper, we survey recent advances in the self-assembly processes of novel functional platforms for nanomaterials and biomaterials applications. We provide an organized overview, by analyzing the main factors that influence the formation of organic nanostructured systems, while putting into evidence the main challenges, limitations and emerging approaches in the various fields of nanotechology and biotechnology. We outline how the building blocks properties, the mutual and cooperative interactions, as well as the initial spatial configuration (and environment conditions) play a fundamental role in the construction of efficient nanostructured materials with desired functional properties. The insertion of functional endgroups (such as polymers, peptides or DNA) within the nanostructured units has enormously increased the complexity of morphologies and functions that can be designed in the fabrication of bio-inspired materials capable of mimicking biological activity. However, unwanted or uncontrollable effects originating from unexpected thermodynamic perturbations or complex cooperative interactions interfere at the molecular level with the designed assembly process. Correction and harmonization of unwanted processes is one of the major challenges of the next decades and requires a deeper knowledge and understanding of the key factors that drive the formation of nanomaterials. Self-assembly of nanomaterials still remains a central topic of current research located at the interface between material science and engineering, biotechnology and nanomedicine, and it will continue to stimulate the renewed interest of biologist, physicists and materials engineers by combining the principles of molecular self-assembly with the concept of supramolecular chemistry.

Nanoliposomes and Tocosomes as Multifunctional Nanocarriers for the Encapsulation of Nutraceutical and Dietary Molecules

Nanoscale lipid bilayers, or nanoliposomes, are generally spherical vesicles formed by the dispersion of phospholipid molecules in a water-based medium by energy input. The other nanoscale object discussed in this entry, i.e., tocosome, is a recently introduced bioactive carrier made mainly from tocopheryl phosphates. Due to their bi-compartmental structure, which consists of lipidic and aqueous compartments, these nanocarriers are capable of carrying hydrophilic and hydrophobic material separately or simultaneously. Nanoliposomes and tocosomes are able to provide protection and release of sensitive food-grade bioactive materials in a sustained manner. They are being utilized for the encapsulation of different types of bioactive materials (such as drugs, vaccines, antimicrobials, antioxidants, minerals and preservatives), for the enrichment and fortification of different food and nutraceutical formulations and manufacturing of functional products. However, a number of issues unique to the nutraceutical and food industry must first be resolved before these applications can completely become a reality. Considering the potentials and promises of these colloidal carrier systems, the present article reviews various aspects of nanoliposomes, in comparison with tocosomes, including the ingredients used in their manufacture, formation mechanisms and issues pertaining to their application in the formulation of health promoting dietary supplements and functional food products.

Cetyltrimethylammonium Bromide (CTAB) Bloated Micelles and Merged CTAB/Bolaamphiphiles Self-Assembled Vesicles toward the Generation of Highly Porous Alumina as Efficacious Inorganic Adsorbents

Herein, in a new approach, highly porous alumina materials (HiPAs) have been synthesized through cetyltrimethylammonium bromide (CTAB) bloated micelles or merged CTAB/dicarboxylic acid vesicular aggregates (di-acids with 8, 10, and 12 carbon atoms) as novel templates and characterized by N₂ sorption, low- and wide-angle XRD (X-ray diffraction), FE-SEM (field emission scanning electron microscopy), TEM (transmission electron microscopy), HR-TEM (high-resolution transmission electron microscopy), DLS (dynamic light scattering), and AFM (atomic force microscopy) analyses. In the absence of dicarboxylic acids, CTAB bloated micelles in ethanol-aqueous solutions were conductive to the formation of mesoporous γ-alumina hollow spheres (HiPA-CT) with high surface area (394 m² g^-1) and ultralarge pore volume (1.8 cm³ g^-1). Notably, merged giant vesicular assemblies formed between dicarboxylic acids and CTAB endowed the mesoporous alumina nanoparticle aggregates with tunable and unprecedented pore features (surface area of 415-735 m² g^-1 and ultrahigh pore volume of 1.37-2.57 cm³ g^-1), in which their pinnacle was obtained via CTAB/10 (HiPA-CT-10). Due to the tailored porosity, the HiPA-CT and HiPA-CT-10 were exploited for ciprofloxacin (CIP) adsorption experiments. The adsorption efficiency attained a climax at pH 6. At CIP concentrations below 1 ppm, 91 and 86% of CIP were removed by HiPA-CT and HiPA-CT-10, respectively. The maximum adsorption capacities of HiPA-CT and HiPA-CT-10 are 120 and 184 mg g^-1, respectively, in which the latter is surpassing those of inorganic antibiotic adsorbents reported so far. The kinetic results showed that the removal of CIP by HiPA-CT was faster due to the presence of macropores and more accessible active sites on mesoporous surfaces. The reusability test was acceptable after eight runs. The results signify that these novel materials have high potential for reducing our environmental concerns.

Non-Lamellar Lyotropic Liquid Crystalline Lipid Nanoparticles for the Next Generation of Nanomedicine

Nonlamellar lyotropic liquid crystalline (LLC) lipid nanomaterials have emerged as a promising class of advanced materials for the next generation of nanomedicine, comprising mainly of amphiphilic lipids and functional additives self-assembling into two- and three-dimensional, inverse hexagonal, and cubic nanostructures. In particular, the lyotropic liquid crystalline lipid nanoparticles (LCNPs) have received great interest as nanocarriers for a variety of hydrophobic and hydrophilic small molecule drugs, peptides, proteins, siRNAs, DNAs, and imaging agents. Within this space, there has been a tremendous amount of effort over the last two decades elucidating the self-assembly behavior and structure-function relationship of natural and synthetic lipid-based drug delivery vehicles in vitro, yet successful clinical translation remains sparse due to the lack of understanding of these materials in biological bodies. This review provides an overview of (1) the benefits and advantages of using LCNPs as drug delivery nanocarriers, (2) design principles for making LCNPs with desirable functionalities for drug delivery applications, (3) current understanding of the LLC material-biology interface illustrated by more than 50 in vivo, preclinical studies, and (4) current patenting and translation activities in a pharmaceutical context. Together with our perspectives and expert opinions, we anticipate that this review will guide future studies in developing LCNP-based drug delivery nanocarriers with the objective of translating them into a key player among nanoparticle platforms comprising the next generation of nanomedicine for disease therapy and diagnosis.

Bile Salts Caught in the Act: From Emulsification to Nanostructural Reorganization of Lipid Self-Assemblies

Bile salts (BSs) are important for the digestion and absorption of fats and fat-soluble vitamins in the small intestine. In this work, we scrutinized, with small-angle X-ray scattering (SAXS), the crucial functions of bile salts beyond their capacity for the interfacial stabilization of submicrometer-sized lipid particles. By studying a wide compositional range of BS-lipid dispersions using two widely applied lipids for drug-delivery systems (one a monoglyceride being stabilizer-sensitive and the other an aliphatic alcohol being relatively stabilizer-insensitive), we identified the necessary BS to lipid ratios to guarantee full emulsification. A novel ad hoc developed global small-angle-X-ray scattering analysis method revealed that the addition of BS hardly changes the bilayer thicknesses in bicontinuous phases, while significant membrane thinning is observed in the coexisting fluid lamellar phase. Furthermore, we show that a BS strongly decreases the average critical packing parameter. At increasing BS concentration, the order of phases formed is (i) the bicontinuous diamond cubic ( Pn3 m), (ii) the bicontinuous primitive cubic ( Im3 m), and (iii) the fluid lamellar phase ( L_α). These distinctive findings on BS-driven "emulsification" and "membrane curvature reduction" provide new molecular-scale insights for the understanding of the interfacial action of bile salts on lipid assemblies.

Formation of shelf stable Pickering high internal phase emulsions (HIPE) through the inclusion of whey protein microgels

High internal phase emulsions (HIPE) prepared using whey protein microgels (WPMs) as a surfactant were demonstrated to have substantially higher stability than HIPEs prepared using similar loadings of non-gelled whey protein isolate (WPI) or Tween 20.