Characterization of Polysaccharidic Associations for Cosmetic Use: Rheology and Texture Analysis

Underwater Adhesives from Redox-Responsive Polyplexes of Thiolated Polyamide Polyelectrolytes

We report the fabrication of optically clear underwater adhesives using polyplexes of oppositely charged partially-thiolated polyamide polyelectrolytes (TPEs). The thiol content of the constituent PEs was varied to assess its influence on the adhesive properties of the resulting glues. These catechol-free, redox-responsive TPE-adhesives were formulated in aquo and exhibited high optical transparency and strong adhesion even on submerged or moist surfaces of diverse polar substrates such as glass, aluminium, wood, and bone pieces. The adhesives could be cured under water through oxidative disulphide crosslinking of the constituent TPEs. The polyamide backbone provided multi-site H-bonding interactions with the substrates while the disulphide crosslinking provided the cohesive strength to the glue. Strong adhesion of mammalian bones (load bearing capacity upto 7 kg/cm2 ) was achieved using the adhesive containing 30 mol % thiol residues. Higher pH and use of oxidants such as povidone-iodine solution enhanced the curing rate of the adhesives, and so did the use of Tris buffer instead of Phosphate buffer. The porous architecture of the adhesive and its progressive degradation in aqueous medium over the course of three weeks bode well for diverse biomedical applications where temporary adhesion of tissues is required.

Development of Emulsions Containing L-Ascorbic Acid and α-Tocopherol Based on the Polysaccharide FucoPol: Stability Evaluation and Rheological and Texture Assessment

The main function of vitamin C, as an antioxidant, is to combat free radicals and prevent premature aging, smoothing wrinkles and expression lines. In addition, it acts directly on depigmentation and prevention of blemishes on the skin. In this study, natural oils (30 wt.%) and α-tocopherol (2.5 wt.%) containing oil-in-water (O/W) emulsions stabilized with the bacterial fucose-rich polysaccharide FucoPol were formulated, adding L-ascorbic acid as an antioxidant. The optimized formulations were obtained with 8.0 wt.% L-ascorbic acid for the Olea europaea oil formulation (C1) with a ƞ value of 2.71 Pa.s (measured at shear rate of 2.3 s−1) and E24 = 96% and with 15 wt.% L-ascorbic acid for the Prunus amygdalus dulcis formulation (C2) with a ƞ value of 5.15 Pa.s (at a shear rate of 2.3 s−1) and E24 = 99%. The stability of the FucoPol-based formulations was investigated over 45 days at 4 °C, 20 °C, and 30 °C. The results showed that all formulations maintained the organoleptic characteristics, with pH variations (5.7–6.8 for C1, and 5.5–6.03 for C2) within the regulations for cosmetic products (4 ≤ pH ≤ 7). The accelerated stability tests proved the formulations’ stability at 4 °C with EI = 95% for C1 and EI = 100% for C2. The rheological assessment demonstrated that the formulation presents a shear-thinning and liquid-like behavior. Regarding textural parameters, formulations C1 and C2 displayed an increase in firmness and consistency with similar spreadability during the shelf life. These findings further demonstrate FucoPol’s functional properties, acting as an emulsifier and stabilizer polysaccharide in cosmetic formulations containing L-ascorbic acid.

Cosmetic emulsion based on the fucose-rich polysaccharide FucoPol: Bioactive properties and sensorial evaluation

In this study, the physicochemical characteristics, bioactive properties, and sensorial evaluation of a O/W cosmetic formulation containing FucoPol, a fucose-containing bacterial polysaccharide, were assessed. The stability of the FucoPol-based cream, named F-cream, was demonstrated over a period of 2 months at different temperatures (4, 20 and 30 °C), during which it maintained the organoleptic characteristics and pH (5.88-6.19), with minimal variations on the apparent viscosity. Furthermore, no breaking mechanisms occurred upon centrifuging the samples (accelerated stability test) kept at 4 °C and at 30 °C for 60 days. The F-cream presented a shear-thinning and solid-liquid behavior consistent with its envisaged use for topical applications, proving to be a suitable candidate for an anti-aging application due to its antioxidant capacity and effective photoprotection, maintaining cellular preservation. Moreover, the formulation was proven non-cytotoxic for HaCaT cells at concentrations between 0.78 and 12.5 mg/mL, promoting HFFF2 cell migration (46-70 % of wound closure) at a concentration of 2.5 mg/mL, and HaCaT cell migration at a concentration of 10 mg/mL (95-98 % of wound closure). Upon application over the skin, the F-cream provided a hydration and softness with desired spreadability with no residues after application. These findings show that FucoPol has good potential to be used as a functional and/or active ingredient in cosmetic formulations, forming an emulsified cream with appealing sensorial properties that can act as a moisturizer with photoprotection, antioxidant, and regeneration properties.

Natural Polymers and Cosmeceuticals for a Healthy and Circular Life: The Examples of Chitin, Chitosan, and Lignin

The present review considers the design and introduction of new cosmeceuticals in the market, based on natural polymers and active molecules extracted from biomass, in a biomimetic strategy, starting with a consideration of the biochemical mechanisms, followed by natural precision biopolymer production. After introducing the contest of nanobiotechnology in relationship with its applicability for skin contact products and classifying the currently available sustainable polymers, some widely selected abundant biopolymers (chitin, chitosan, and lignin), showing specific functionalities (anti-microbial, anti-oxidant, anti-inflammatory, etc.), are described, especially considering the possibility to combine them in nanostructured tissues, powders, and coatings for producing new cosmeceuticals, but with potentialities in other sectors, such as biomedical, personal care, and packaging sectors. After observing the general increase in market wellness and beauty forecasts over the next few years, parallelisms between nano and macro scales have suggested that nanobiotechnology application expresses the necessity to follow a better way of producing, selecting, and consuming goods that will help to transform the actual linear economy in a circular economy, based on redesigning, reducing, recycling, and reusing.

Formulation of the Polysaccharide FucoPol into Novel Emulsified Creams with Improved Physicochemical Properties

Driven by the customers' growing awareness of environmental issues, the production of topical formulations based on sustainable ingredients is receiving widespread attention from researchers and the industry. Although numerous sustainable ingredients (natural, organic, or green chemistry-derived compounds) have been investigated, there is a lack of comparative studies between conventional ingredients and sustainable alternatives. In this study, olive oil (30 wt.%) and α-tocopherol (2.5 wt.%) containing oil-in-water (O/W) emulsions stabilized with the bacterial fucose-rich polysaccharide FucoPol were formulated envisaging their validation as cosmetic creams. After formula composition design by Response Surface Methodology (RSM), the optimized FucoPol-based emulsion was prepared with 1.5 wt.% FucoPol, 1.5 wt.% cetyl alcohol, and 3.0 wt.% glycerin. The resulting emulsions had an apparent viscosity of 8.72 Pa.s (measured at a shear rate 2.3 s^-1) and droplet size and zeta potential values of 6.12 µm and -97.9 mV, respectively, which are within the values reported for cosmetic emulsified formulations. The optimized formulation displayed the desired criterium of a thin emulsion system, possessing the physicochemical properties and the stability comparable to those of commercially available products used in cosmeceutical applications.

Formulation and Physical Characterization of a Polysaccharidic Gel for the Vehiculation of an Insoluble Phytoextract for Mucosal Application

Maintaining insoluble plant-based ingredients in suspension and ensuring long-term physical stability is particularly challenging for formulators of green cosmetics. This study aimed to evaluate the structure and applicative properties of gel and gel-cream topical formulations suitable for delivering an insoluble phytocomplex on the vaginal mucosa and maintaining its integrity. For this purpose, we studied the compatibility of Perilla frutescens (L.) Britton phytocomplex (PFP), derived from in vitro plant cell cultures and presented as a powder finely dispersed in glycerin, with different classes of natural rheological modifiers (such as xanthan gum, sclerotium gum, succinoglycan, xyloglucan, diutan gum, hydroxypropyl guar gum derivative) in gel and gel-cream formulations, to meet the needs of the cosmetic market for naturalness and biodegradability. Through rheological and texture analyses, we studied the physico–mechanical properties of the samples, comparing the performances of the chosen polysaccharides to those of acrylic polymeric rheological modifiers, evaluating their contribution in terms of stability and applicative properties. Since a weak-gel rheological pattern proved to be the optimal one to keep the actives in suspension, the associations of tamarind seed polysaccharides with succinoglycan or scleroglucan were the most suitable for the formulation of mucoadhesive gels.

Investigation of a Minocycline-Loaded Nanoemulgel for the Treatment of Acne Rosacea

In the present investigation, a nanoemulgel of minocycline was formulated and optimized for an improved drug delivery and longer retention time in the targeted area. Combining eucalyptus oil, Tween 20, and Transcutol HP, different o/w nanoemulsions were formulated by the oil phase titration method and optimized by pseudo-ternary phase diagrams. The morphology, droplet size, viscosity, and refractive index of the thermodynamically stable nanoemulsion were determined. Furthermore, optimized nanoemulsion was suspended in 1.0% w/v of Carbopol 940 gel to formulate the nanoemulgel, and for this, pH, viscosity, and spreadability were determined and texture analysis was performed. To compare the extent of drug penetration between nanoemulsion and nanoemulgel, ex vivo skin permeation studies were conducted with Franz diffusion cell using rat skin as the permeation membrane, and the nanoemulgel exhibited sustained-release behavior. It can be concluded that the suggested minocycline-containing naoemulgel is expected to treat acne rosacea more effectively.

Development of Olive Oil and α-Tocopherol Containing Emulsions Stabilized by FucoPol: Rheological and Textural Analyses

Biobased raw materials like natural polysaccharides are increasingly sought by the cosmetic industry for their valuable properties. Such biodegradable and usually non-cytotoxic biopolymers are commonly used in skin-care products as rheological modifiers, bioemulsifiers and/or bioactive ingredients. FucoPol is a natural polysaccharide with reported biocompatibility, emulsion-forming and stabilizing capacity, shear-thinning behavior and bioactivity (e.g., antioxidant capacity, wound healing ability) that potentiate its utilization in skin-care products. In this study, olive oil and α-tocopherol containing emulsions were stabilized with FucoPol. Although the presence of α-tocopherol negatively impacted the emulsions’ stability, it increased their emulsification index (EI). Moreover, FucoPol outperformed the commercial emulsifier Sepigel^® 305, under the tested conditions, with higher EI and higher stability under storage for 30 days. The formulation of FucoPol-based emulsions with olive oil and α-tocopherol was studied by Response Surface Methodology (RSM) that allowed the definition of the ingredients’ content to attain high emulsification. The RSM model established that α-tocopherol concentration had no significant impact on the EI within the tested ranges, with optimal emulsification for FucoPol concentration in the range 0.7–1.2 wt.% and olive oil contents of 20–30 wt.%. Formulations with 25 wt.% olive oil and either 0.5 or 2.0 wt.% α-tocopherol were emulsified with 1.0 wt.% or 0.7 wt.% FucoPol, respectively, resulting in oil-in-water (O/W) emulsions. The emulsions had similar shear-thinning behavior, but the formulation with higher FucoPol content displayed higher apparent viscosity, higher consistency, as well as higher firmness, adhesiveness and cohesiveness, but lower spreadability. These findings show FucoPol’s high performance as an emulsifier for olive oil/α-tocopherol, which are supported by an effective impact on the physicochemical and structural characteristics of the emulsions. Hence, this natural polysaccharide is a potential alternative to other emulsifiers.

Applying Seaweed Compounds in Cosmetics, Cosmeceuticals and Nutricosmetics

The interest in seaweeds for cosmetic, cosmeceutics, and nutricosmetics is increasing based on the demand for natural ingredients. Seaweeds offer advantages in relation to their renewable character, wide distribution, and the richness and versatility of their valuable bioactive compounds, which can be used as ingredients, as additives, and as active agents in the formulation of skin care products. Bioactive compounds, such as polyphenols, polysaccharides, proteins, peptides, amino acids, lipids, vitamins, and minerals, are responsible for the biological properties associated with seaweeds. Seaweed fractions can also offer technical features, such as thickening, gelling, emulsifying, texturizing, or moistening to develop cohesive matrices. Furthermore, the possibility of valorizing industrial waste streams and algal blooms makes them an attractive, low cost, raw and renewable material. This review presents an updated summary of the activities of different seaweed compounds and fractions based on scientific and patent literature.