Molecular Structures and Second-Order Nonlinear Optical Properties of Ionic Organic Crystal Materials

Room-Temperature Phase Transition Material with Switchable Second-Order Nonlinear Optical Properties

Phase transition materials with switchable second-order nonlinear optical (NLO) properties have attracted extensive attention because of their great application potential in photoelectric switches, sensors, and modulators, while metal-free organics with NLO switchability near room temperature remain scarce. Herein, we report a hydrogen-bonded metal-free organic crystal, 2-methylpropan-2-aminium 2,2-dimethylpropanoate (1), exhibiting a room-temperature phase transition and favorable NLO switchability. Through investigations on its thermal anomalies, dielectric properties, and crystal structures, we uncover that 1 holds a near-room-temperature phase transition at 303 K from noncentrosymmetric point group C2v to centrosymmetric one D2h, which is attributed to the order-disorder transformations of both tert-butylamine cations and dimethylpropionic acid anions. Accompanied by symmetry change during the phase transition, 1 exhibits reversible and repeatable NLO "on-off" switchability with a desirable switching contrast ratio of ca. 19 between high and low NLO states. This discovery demonstrates a metal-free organic crystal with NLO switching behavior near room temperature, serving as a promising candidate in smart and ecofriendly photoelectric functional materials and devices.

Flexible molecular crystals for optoelectronic applications

The cornerstones of the advancement of flexible optoelectronics are the design, preparation, and utilization of novel materials with favorable mechanical and advanced optoelectronic properties. Molecular crystalline materials have emerged as a class of underexplored yet promising materials due to the reduced grain boundaries and defects anticipated to provide enhanced photoelectric characteristics. An inherent drawback that has precluded wider implementation of molecular crystals thus far, however, has been their brittleness, which renders them incapable of ensuring mechanical compliance required for even simple elastic or plastic deformation of the device. It is perplexing that despite a plethora of reports that have in the meantime become available underpinning the flexibility of molecular crystals, the "discovery" of elastically or plastically deformable crystals remains limited to cases of serendipitous and laborious trial-and-error approaches, a situation that calls for a systematic and thorough assessment of these properties and their correlation with the structure. This review provides a comprehensive and concise overview of the current understanding of the origins of crystal flexibility, the working mechanisms of deformations such as plastic and elastic bending behaviors, and insights into the examples of flexible molecular crystals, specifically concerning photoelectronic changes that occur in deformed crystals. We hope this summary will provide a reference for future experimental and computational efforts with flexible molecular crystals aimed towards improving their mechanical behavior and optoelectronic properties, ultimately intending to advance the flexible optoelectronic technology.

Investigation of photophysical and electronic properties of aurone derivatives: Insights from spectroscopic techniques and density functional theory calculations

This paper reports on a study of the photophysical properties, density functional theory (DFT) calculations, infrared (IR), ultraviolet (UV) and nuclear magnetic resonance (NMR) spectroscopic techniques of a series of aurone compounds. The photophysical properties were investigated using UV absorption and fluorescence spectroscopy in a dimethyl sulfoxide (DMSO) solution. Furthermore, the fluorescence quantum yields of the target compounds (1-24) were also investigated. Remarkably, these compounds revealed high quantum yields (Φ = 0.001-0.729) as compared to the already existing aurones in literature. The DFT calculations were performed to elucidate the electronic structure, energy levels and draw a comparison between experimental and theoretical findings. The simulated properties such as molecular frontier orbitals, the density of states, reactivity descriptors (GCRD), electrostatic potential distribution, transition density matrix, electron localization function (ELF) and localized orbital locator (LOL) have been calculated using DFT. The DFT calculations provided insight into the electronic structure and energy levels of the aurone compounds, while the IR and UV spectroscopy results shed light on their functional groups and electronic transitions, respectively. The results of this study contribute to a better understanding of the photophysical properties of aurone compounds and suggest their potential use in technological applications.

Color properties and non-covalent interactions in hydrated (Z)-4-(1-cyano-2-(2,4,5-trimethoxyphenyl)-vinyl)pyridin-1-ium chloride salt: Insights from experimental and theoretical studies

The optical charge-transfer (CT) property and the crystal structure of (Z)-4-(1-cyano-2-(2,4,5-trimethoxyphenyl)vinyl)pyridin-1-ium chloride monohydrate salt (I), which belongs to an acrylonitrile family, was studied. The title salt, I, was characterized using different spectroscopy techniques and a single-crystal X-ray diffraction study combined with quantum chemical computations. The results showed that the color properties of I are determined by the CT, changes in bandgap, optical absorption, and various non-covalent interactions. The HOMO-LUMO energy gaps are 5.41 eV and 5.23 eV for the precursor and salt, respectively. It was demonstrated that π-π stacking interactions lead to the formation of intercalated dimers and donor-acceptor interactions assisted by hydrogen bonds; the dimers and interactions are different between the precursor and the salt. The cation moiety is mainly stabilized by N(1)+-H···Cl, and the anion is predominantly stabilized by strong O(1W)- H⋯ Cl- bonds as well as the hydrogen bonds with the MeO group O(2W)-H⋯O(1) and O(2W)-H⋯O(1W). The charge transfer between cation and anion moieties in the structure is established through NBO analysis.

Ionic Organic Solid 1,3-Bis(sulfomethyl)imidazoliumate as an Effective Metal-Free Catalyst for Sustainable Organic Syntheses

The 1,3-bis(sulfomethyl)imidazole (bsmim) was effectively prepared by a multicomponent reaction, employing aminomethanesulfonic acid, glyoxal, and formaldehyde. The catalytic activity of bsmim was tested in the synthesis of quinoline derivatives, by means of the Friedländer reaction, and in the allylic substitution of alcohols with nitrogen-containing heterocycles. The performance of sulfo-imidazole derivative (bsmim) resulted in higher comparison with the carboxyimidazole analogs (bcmim and bcmimCl), under the same reaction conditions. This type of ionic organic solid allows the promotion of reactions in the absence of solvent and mild reaction conditions, which improves the sustainability of organic synthetic processes.

Organic Kainate Single Crystals for Second-Harmonic and Broadband THz Generation

Organic crystals with unique nonlinear optical properties have been attracting attention owing to their capability to outperform their conventional nonorganic counterparts. Since nonlinear material responses are linked to a crystal's internal microscopic structure, molecular engineering of maximally unharmonic quantum potentials can boost macromolecular susceptibilities. Here, large-scale kainic acid (kainate) single crystals were synthesized, and their linear and nonlinear optical properties were studied in a broad spectral range, spanning the visible to THz spectral regions. The non-centrosymmetric zwitterionic crystallization, molecular structure, and intermolecular arrangement were found to act as additive donor-acceptor domains, enhancing the efficiency of the intrinsic second-order optical nonlinearity of this pure enantiomeric crystal. Molecular simulations and experimental analysis were performed to retrieve the crystals' properties. The crystals were predicted and found to have good transparency in a broad spectral range from the UV to the infrared (0.2-20 μm). Second-harmonic generation was measured for ultrashort pumping wavelengths between 800 and 2400 nm, showing an enhanced response around 600 nm. Broadband THz generation was demonstrated with a detection limited bandwidth of >8 THz along with emission efficiencies comparable to and prevailing those of commercial ZnTe crystals. The broadband nonlinear response and high transparency make kainate crystals extremely attractive for realizing a range of nonlinear optical devices.

Polar and non-polar stacking of perfectly aligned parallel beloamphiphile monolayers (PBAMs) of (PhO, F)-azine. The interplay of non-covalent interlayer interactions and unit cell polarity

The differences are discussed of the antiferroelectric and ferroelectric stacking of the PBAMs of the polymorphs of (PhO, F)-azine. We will show how non-covalent interlayer H⋯F and F⋯F interactions between the PBAM surfaces affect their stacking.

Engineering hydrogen bonding to align molecular dipoles in organic solids for efficient second harmonic generation

Considering nearly infinite design possibilities, organic second harmonic generation (SHG) molecules are believed to have long-term promise. However, because of the tendency to form dipole-antiparallel crystals that lead to zero macroscopic polarization, it is difficult to design a nonlinear optical (NLO) material based on organic molecules. In this manuscript, we report a new molecule motif that can form asymmetric organic solids by controlling the degree of hydrogen bonding through protonation. A conjugated polar organic molecule was prepared with a triple bond connecting an electron-withdrawing pyridine ring and an electron-donating thiophene ring. By controlling the degree of hydrogen bonding through protonation, two different crystal packing motifs are achieved. One crystallizes into the common dipole-antiparallel nonpolar P1̄ space group. The second crystallizes into the uncommon dipole-parallel polar P1 space group, in which the molecular dipoles are aligned along a single axis and thus exhibit a high macroscopic polarization in its solid-state form. Due to the P1 polar packing, the sample can generate second harmonic light efficiently, about three times the intensity of the benchmark potassium dihydrogen phosphate. Our findings show that crystal engineering by hydrogen bonding in a single molecular backbone can be used for controlling the macroscopic NLO properties.

Halogen regulation triggers structural transformation from centrosymmetric to noncentrosymmetric switches in tin phosphate halides Sn2PO4X (X = F, Cl)

A tin phosphate halide, centrosymmetric Sn2PO4F, was successfully transformed into noncentrosymmetric Sn2PO4Cl with excellent comprehensive performance by the substitution of F− with Cl−.

Organic Broadband THz Generators Optimized for Efficient Near-Infrared Optical Pumping

New organic THz generators are designed herein by molecular engineering of the refractive index, phonon mode, and spatial asymmetry. These benzothiazolium crystals simultaneously satisfy the crucial requirements for efficient THz wave generation, including having nonlinear optical chromophores with parallel alignment that provide large optical nonlinearity; good phase matching for enhancing the THz generation efficiency in the near-infrared region; strong intermolecular interactions that provide restraining THz self-absorption; high solubility that promotes good crystal growth ability; and a plate-like crystal morphology with excellent optical quality. Consequently, the as-grown benzothiazolium crystals exhibit excellent characteristics for THz wave generation, particularly at near-infrared pump wavelengths around 1100 nm, which is very promising given the availability of femtosecond laser sources at this wavelength, where current conventional THz generators deliver relatively low optical-to-THz conversion efficiencies. Compared to a 1.0-mm-thick ZnTe crystal as an inorganic benchmark, the 0.28-mm-thick benzothiazolium crystal yields a 19 times higher peak-to-peak THz electric field with a broader spectral bandwidth (>6.5 THz) when pumped at 1140 nm. The present work provides a valuable approach toward realizing organic crystals that can be pumped by near-infrared sources for efficient THz wave generation.

Exploration of physicochemical properties of 4-methoxy acetanilide: A nonlinear optical crystal

The single crystal XRD analysis has been used to examine the structure of the centrosymmetric crystal 4-Methoxy acetanilide. The material delineated in orthorhombic system with the space group of Pbca. FTIR and Raman spectrum analysis have been executed to comprehend the molecular interactions and to study the vibrational nature of the functional groups presented in the title molecule. Characteristic studies like optical, dielectric and thermal stability have also been carried out. Detailed explorations have been conducted on the optical properties of the crystal using both quantum chemical calculations and experimental data.

Continuous Generation of Millimeter-Sized Glycine Crystals in Non-Seeded Millifluidic Slug Flow

Millimeter-sized α-glycine crystals were generated from continuous non-seeded cooling crystallization in slug flow. The crystallization process is composed of three steps in sequence: slug formation, crash-cooling nucleation, and growth. Stable uniform slugs of three different aspect ratios (slug length/tubing inner diameter) were formed, by adjusting the flow rates of both the solution and air streams. Besides supersaturation, the slug aspect ratio can also affect primary nucleation outcome. Stable slug flow can accommodate a relative supersaturation (C/C*) of up to 1.5 without secondary nucleation. Large glycine crystals can grow to millimeter size within 10 min, inside millimeter-sized slugs without reducing the slug quality.

Organic Crystals for THz Photonics

Organic crystals with second-order optical nonlinearity feature very high and ultra-fast optical nonlinearities and are therefore attractive for various photonics applications. During the last decade, they have been found particularly attractive for terahertz (THz) photonics. This is mainly due to the very intense and ultra-broadband THz-wave generation possible with these crystals. We review recent progress and challenges in the development of organic crystalline materials for THz-wave generation and detection applications. We discuss their structure, intrinsic properties, and advantages compared to inorganic alternatives. The characteristic properties of the most widely employed organic crystals at present, such as DAST, DSTMS, OH1, HMQ-TMS, and BNA are analyzed and compared. We summarize the most important principles for THz-wave generation and detection, as well as organic THz-system configurations based on either difference-frequency generation or optical rectification. In addition, we give state-of-the-art examples of very intense and ultra-broadband THz systems that rely on organic crystals. Finally, we present some recent breakthrough demonstrations in nonlinear THz photonics enabled by very intense organic crystalline THz sources, as well as examples of THz spectroscopy and THz imaging using organic crystals as THz sources for various scientific and technological applications.

First molecular electronic hyperpolarizability of series of π-conjugated oxazole dyes in solution: an experimental and theoretical study

In this work, we report for the first time, the experimental and theoretical first molecular electronic hyperpolarizability of eleven π-conjugated oxazoles compounds in toluene medium, by using the hyper-Rayleigh scattering (HRS) technique.

Synthesis, growth and characterization of a new acentric 4-[4-(4-dimethylamino-phenyl)buta-1,3-dienyl]-1-methyl pyridinium p-chlorobenzenesulfonate dihydrate crystal for nonlinear optical applications

A new organic crystal with a noncentrosymmetric structure is developed, and its structural, thermal, linear and nonlinear optical properties are reported.

Superlinear amplification of the first hyperpolarizability of linear aggregates of DANS molecules

A comprehensive study of optical properties of DANS in different environments explains the observed ∼30-fold enhancement of the hyper-Rayleigh signal of DANS@CNT vs. DANS in solution in terms of collective and cooperative phenomena occurring in aggregates of less than 10 aligned molecules.