A Brief Review of Anaerobic Digestion of Algae for Bioenergy

Enrichable consortia of microbial symbionts degrade macroalgal polysaccharides in Kyphosus fish

Coastal herbivorous fishes consume macroalgae, which is then degraded by microbes along their digestive tract. However, there is scarce genomic information about the microbiota that perform this degradation. This study explores the potential of Kyphosus gastrointestinal microbial symbionts to collaboratively degrade and ferment polysaccharides from red, green, and brown macroalgae through in silico study of carbohydrate-active enzyme and sulfatase sequences. Recovery of metagenome-assembled genomes (MAGs) from previously described Kyphosus gut metagenomes and newly sequenced bioreactor enrichments reveals differences in enzymatic capabilities between the major microbial taxa in Kyphosus guts. The most versatile of the recovered MAGs were from the Bacteroidota phylum, whose MAGs house enzyme collections able to decompose a variety of algal polysaccharides. Unique enzymes and predicted degradative capacities of genomes from the Bacillota (genus Vallitalea) and Verrucomicrobiota (order Kiritimatiellales) highlight the importance of metabolic contributions from multiple phyla to broaden polysaccharide degradation capabilities. Few genomes contain the required enzymes to fully degrade any complex sulfated algal polysaccharide alone. The distribution of suitable enzymes between MAGs originating from different taxa, along with the widespread detection of signal peptides in candidate enzymes, is consistent with cooperative extracellular degradation of these carbohydrates. This study leverages genomic evidence to reveal an untapped diversity at the enzyme and strain level among Kyphosus symbionts and their contributions to macroalgae decomposition. Bioreactor enrichments provide a genomic foundation for degradative and fermentative processes central to translating the knowledge gained from this system to the aquaculture and bioenergy sectors.IMPORTANCESeaweed has long been considered a promising source of sustainable biomass for bioenergy and aquaculture feed, but scalable industrial methods for decomposing terrestrial compounds can struggle to break down seaweed polysaccharides efficiently due to their unique sulfated structures. Fish of the genus Kyphosus feed on seaweed by leveraging gastrointestinal bacteria to degrade algal polysaccharides into simple sugars. This study reconstructs metagenome-assembled genomes for these gastrointestinal bacteria to enhance our understanding of herbivorous fish digestion and fermentation of algal sugars. Investigations at the gene level identify Kyphosus guts as an untapped source of seaweed-degrading enzymes ripe for further characterization. These discoveries set the stage for future work incorporating marine enzymes and microbial communities in the industrial degradation of algal polysaccharides.

Fermentation of micro- and macroalgae as a way to produce value-added products

Fermentation of both microalgae and macroalgae is one of the most efficient methods of obtaining valuable value-added products due to the minimal environmental pollution and the availability of economic benefits, as algae do not require arable land and drift algae and algal bloom biomass are considered waste and must be recycled and their fermentation waste utilized. The compounds found in algae can be effectively used in the fuel, food, cosmetic, and pharmaceutical industries, depending on the type of fermentation used. Products such as methane and hydrogen can be produced by anaerobic digestion and dark fermentation of algae, and lactic acid and its polymers can be produced by lactic acid fermentation of algae. Article aims to provide an overview of the different types potential of micro- and macroalgae fermentation, the advantages and disadvantages of each type considered, and the economic feasibility of algal fermentation for the production of various value-added products.

Enrichable consortia of microbial symbionts degrade macroalgal polysaccharides in Kyphosus fish

Coastal herbivorous fishes consume macroalgae, which is then degraded by microbes along their digestive tract. However, there is scarce foundational genomic work on the microbiota that perform this degradation. This study explores the potential of Kyphosus gastrointestinal microbial symbionts to collaboratively degrade and ferment polysaccharides from red, green, and brown macroalgae through in silico study of carbohydrate-active enzyme and sulfatase sequences. Recovery of metagenome-assembled genomes (MAGs) reveals differences in enzymatic capabilities between the major microbial taxa in Kyphosus guts. The most versatile of the recovered MAGs were from the Bacteroidota phylum, whose MAGs house enzymes able to decompose a variety of algal polysaccharides. Unique enzymes and predicted degradative capacities of genomes from the Bacillota (genus Vallitalea) and Verrucomicrobiota (order Kiritimatiellales) suggest the potential for microbial transfer between marine sediment and Kyphosus digestive tracts. Few genomes contain the required enzymes to fully degrade any complex sulfated algal polysaccharide alone. The distribution of suitable enzymes between MAGs originating from different taxa, along with the widespread detection of signal peptides in candidate enzymes, is consistent with cooperative extracellular degradation of these carbohydrates. This study leverages genomic evidence to reveal an untapped diversity at the enzyme and strain level among Kyphosus symbionts and their contributions to macroalgae decomposition. Bioreactor enrichments provide a genomic foundation for degradative and fermentative processes central to translating the knowledge gained from this system to the aquaculture and bioenergy sectors.

Energy-saving pretreatments affect pelagic Sargassum composition and DNA metabarcoding reveals the microbial community involved in methane yield

Sargassum spp. flood the Caribbean coastline, causing damage to the local economy and environment. Anaerobic digestion (AD) has been proposed as an attractive option for turning macroalgae into valuable resources. Sargassum spp. has a complex composition that affects the microbial composition involved in AD which generates a low methane yield. This study aimed to improve the methane yield of pelagic Sargassum, using different energy-saving pretreatments and identifying the microbial community associated with methane production. We applied different energy-saving pretreatments to algal biomass and assessed the methane yield using a biomethane potential (BMP) test. The microbial communities involved in the AD of the best- and worst-performing methanogenic systems were analyzed by high-throughput sequencing. The results showed that pretreatment modified the content of inorganic compounds, fibers, and the C:N ratio, which had a strong positive correlation with BMP. The water washing pretreatment resulted in the best methane yield, with an increase of 38%. DNA metabarcoding analysis revealed that the bacterial genera Marinilabiliaceae_uncultured, DMER64, Treponema, and Hydrogenispora, as well as the archaea genera Methanosarcina, RumEn_M2, Bathyarchaeia, and Methanomassiliicocus, dominated the microbial community with a high methane yield. This study is the first to demonstrate the microbial community structure involved in the AD of Sargassum spp. The pretreatments presented in this study can help overcome the limitations associated with methane yield.

Recovery of valuable metals from spent lithium-ion batteries using microbial agents for bioleaching: a review

Spent lithium-ion batteries (LIBs) are increasingly generated due to their widespread use for various energy-related applications. Spent LIBs contain several valuable metals including cobalt (Co) and lithium (Li) whose supply cannot be sustained in the long-term in view of their increased demand. To avoid environmental pollution and recover valuable metals, recycling of spent LIBs is widely explored using different methods. Bioleaching (biohydrometallurgy), an environmentally benign process, is receiving increased attention in recent years since it utilizes suitable microorganisms for selective leaching of Co and Li from spent LIBs and is cost-effective. A comprehensive and critical analysis of recent studies on the performance of various microbial agents for the extraction of Co and Li from the solid matrix of spent LIBs would help for development of novel and practical strategies for effective extraction of precious metals from spent LIBs. Specifically, this review focuses on the current advancements in the application of microbial agents namely bacteria (e.g., Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans) and fungi (e.g., Aspergillus niger) for the recovery of Co and Li from spent LIBs. Both bacterial and fungal leaching are effective for metal dissolution from spent LIBs. Among the two valuable metals, the dissolution rate of Li is higher than Co. The key metabolites which drive the bacterial leaching include sulfuric acid, while citric acid, gluconic acid and oxalic acid are the dominant metabolites in fungal leaching. The bioleaching performance depends on both biotic (microbial agents) and abiotic factors (pH, pulp density, dissolved oxygen level and temperature). The major biochemical mechanisms which contribute to metal dissolution include acidolysis, redoxolysis and complexolysis. In most cases, the shrinking core model is suitable to describe the bioleaching kinetics. Biological-based methods (e.g., bioprecipitation) can be applied for metal recovery from the bioleaching solution. There are several potential operational challenges and knowledge gaps which should be addressed in future studies to scale-up the bioleaching process. Overall, this review is of importance from the perspective of development of highly efficient and sustainable bioleaching processes for optimum resource recovery of Co and Li from spent LIBs, and conservation of natural resources to achieve circular economy.

Microalgae-Sustainable Source for Alternative Proteins and Functional Ingredients Promoting Gut and Liver Health

Dietary proteins derived from animal sources, although containing well-balanced profiles of essential amino acids, have considerable environmental and adverse health effects associated with the intake of some animal protein-based products. Consuming foods based on animal proteins carries a higher risk of developing non-communicable diseases such as cancer, heart disease, non-alcoholic fatty liver disease (NAFLD), and inflammatory bowel disease (IBD). Moreover, dietary protein consumption is increasing due to population growth, posing a supply challenge. There is, therefore, growing interest in discovering novel alternative protein sources. In this context, microalgae have been recognized as strategic crops that can provide a sustainable source of protein. Compared to conventional high-protein crops, using microalgal biomass for protein production presents several advantages in food and feed in terms of productivity, sustainability, and nutritional value. Moreover, microalgae positively impact the environment by not exploiting land or causing water pollution. Many studies have revealed the potential of microalgae as an alternative protein source with the added value of positive effects on human health due to their anti-inflammatory, antioxidant, and anti-cancer properties. The main emphasis of this review is on the potential health-promoting applications of microalgae-based proteins, peptides, and bioactive substances for IBD and NAFLD.

Influence of Fe2O3 Nanoparticles on the Anaerobic Digestion of Macroalgae Sargassum spp

The anaerobic digestion (AD) of biomass is a green technology with known environmental benefits for biogas generation. The biogas yield from existing substrates and the biodegradability of biomasses can be improved by conventional or novel enhancement techniques, such as the addition of iron-based nanoparticles (NPs). In this study, the effect of different concentrations of Fe2O3-based NPs on the AD of brown macroalga Sargassum spp. has been investigated by 30 days trials. The effect of NPs was evaluated at different concentrations. The control sample yielded a value of 80.25 ± 3.21 NmLCH4/gVS. When 5 mg/g substrate and 10 mg/g substrate of Fe2O3 NPs were added to the control sample, the yield increased by 24.07% and 26.97%, respectively. Instead, when 50 mg/g substrate of Fe2O3 NPs was added to the control sample, a negative effect was observed, and the biomethane yield decreased by 38.97%. Therefore, low concentrations of Fe2O3 NPs favor the AD process, whereas high concentrations have an inhibitory effect. Direct interspecies electron transfer (DIET) via Fe2O3 NPs and their insolubility play an important role in facilitating the methanogenesis process during AD.

Integration of third generation biofuels with bio-electrochemical systems: Current status and future perspective

Biofuels hold particular promise as these can replace fossil fuels. Algae, in particular, are envisioned as a sustainable source of third-generation biofuels. Algae also produce several low volume high-value products, which enhance their prospects of use in a biorefinery. Bio-electrochemical systems such as microbial fuel cell (MFC) can be used for algae cultivation and bioelectricity production. MFCs find applications in wastewater treatment, CO₂ sequestration, heavy metal removal and bio-remediation. Oxidation of electron donor by microbial catalysts in the anodic chamber gives electrons (reducing the anode), CO_2, and electrical energy. The electron acceptor at the cathode can be oxygen/NO₃ ^-/NO₂ ^-/metal ions. However, the need for a continuous supply of terminal electron acceptor in the cathode can be eliminated by growing algae in the cathodic chamber, as they produce enough oxygen through photosynthesis. On the other hand, conventional algae cultivation systems require periodic oxygen quenching, which involves further energy consumption and adds cost to the process. Therefore, the integration of algae cultivation and MFC technology can eliminate the need of oxygen quenching and external aeration in the MFC system and thus make the overall process sustainable and a net energy producer. In addition to this, the CO₂ gas produced in the anodic chamber can promote the algal growth in the cathodic chamber. Hence, the energy and cost invested for CO₂ transportation in an open pond system can be saved. In this context, the present review outlines the bottlenecks of first- and second-generation biofuels along with the conventional algae cultivation systems such as open ponds and photobioreactors. Furthermore, it discusses about the process sustainability and efficiency of integrating algae cultivation with MFC technology in detail.

Sustainable production of biofuels and bioderivatives from aquaculture and marine waste

The annual global fish production reached a record 178 million tonnes in 2020, which continues to increase. Today, 49% of the total fish is harvested from aquaculture, which is forecasted to reach 60% of the total fish produced by 2030. Considering that the wastes of fishing industries represent up to 75% of the whole organisms, the fish industry is generating a large amount of waste which is being neglected in most parts of the world. This negligence can be traced to the ridicule of the value of this resource as well as the many difficulties related to its valorisation. In addition, the massive expansion of the aquaculture industry is generating significant environmental consequences, including chemical and biological pollution, disease outbreaks that increase the fish mortality rate, unsustainable feeds, competition for coastal space, and an increase in the macroalgal blooms due to anthropogenic stressors, leading to a negative socio-economic and environmental impact. The establishment of integrated multi-trophic aquaculture (IMTA) has received increasing attention due to the environmental benefits of using waste products and transforming them into valuable products. There is a need to integrate and implement new technologies able to valorise the waste generated from the fish and aquaculture industry making the aquaculture sector and the fish industry more sustainable through the development of a circular economy scheme. This review wants to provide an overview of several approaches to valorise marine waste (e.g., dead fish, algae waste from marine and aquaculture, fish waste), by their transformation into biofuels (biomethane, biohydrogen, biodiesel, green diesel, bioethanol, or biomethanol) and recovering biomolecules such as proteins (collagen, fish hydrolysate protein), polysaccharides (chitosan, chitin, carrageenan, ulvan, alginate, fucoidan, and laminarin) and biosurfactants.

Seaweed for climate mitigation, wastewater treatment, bioenergy, bioplastic, biochar, food, pharmaceuticals, and cosmetics: a review

The development and recycling of biomass production can partly solve issues of energy, climate change, population growth, food and feed shortages, and environmental pollution. For instance, the use of seaweeds as feedstocks can reduce our reliance on fossil fuel resources, ensure the synthesis of cost-effective and eco-friendly products and biofuels, and develop sustainable biorefinery processes. Nonetheless, seaweeds use in several biorefineries is still in the infancy stage compared to terrestrial plants-based lignocellulosic biomass. Therefore, here we review seaweed biorefineries with focus on seaweed production, economical benefits, and seaweed use as feedstock for anaerobic digestion, biochar, bioplastics, crop health, food, livestock feed, pharmaceuticals and cosmetics. Globally, seaweeds could sequester between 61 and 268 megatonnes of carbon per year, with an average of 173 megatonnes. Nearly 90% of carbon is sequestered by exporting biomass to deep water, while the remaining 10% is buried in coastal sediments. 500 gigatonnes of seaweeds could replace nearly 40% of the current soy protein production. Seaweeds contain valuable bioactive molecules that could be applied as antimicrobial, antioxidant, antiviral, antifungal, anticancer, contraceptive, anti-inflammatory, anti-coagulants, and in other cosmetics and skincare products.

Algal biomass to biohydrogen: Pretreatment, influencing factors, and conversion strategies

Hydrogen has gained attention as an alternative source of energy because of its non-polluting nature as on combustion it produces only water. Biological methods are eco-friendly and have benefits in waste management and hydrogen production simultaneously. The use of algal biomass as feedstock in dark fermentation is advantageous because of its low lignin content, high growth rate, and carbon-fixation ability. The major bottlenecks in biohydrogen production are its low productivity and high production costs. To overcome these issues, many advances in the area of biomass pretreatment to increase sugar release, understanding of algal biomass composition, and development of fermentation strategies for the complete recovery of nutrients are ongoing. Recently, mixed substrate fermentation, multistep fermentation, and the use of nanocatalysts to improve hydrogen production have increased. This review article evaluates the current progress in algal biomass pretreatment, key factors, and possible solutions for increasing hydrogen production.

Robust Control Based on Modeling Error Compensation of Microalgae Anaerobic Digestion

Microalgae are used to produce renewable biofuels (biodiesel, bioethanol, biogas, and biohydrogen) and high-value-added products, as well as in bioremediation and CO2 sequestration tasks. In the case of anaerobic digestion of microalgae, biogas can be produced from mainly proteins and carbohydrates. Anaerobic digestion is a complex process that involves several stages and is susceptible to operational instability due to various factors. Robust controllers with simple structure and design are necessary for practical implementation purposes and to achieve a proper process operation despite process variabilities, uncertainties, and complex interactions. This paper presents the application of a control design based on the modeling error compensation technique for the anaerobic digestion of microalgae. The control design departs from a low-order input–output model by enhancement with uncertainty estimation. The results show that achieving desired organic pollution levels and methanogenic biomass concentrations as well as minimizing the effect of external perturbations on a benchmark case study of the anaerobic digestion of microalgae is possible with the proposed control design.

Methane Production of Sargassum spp. Biomass from the Mexican Caribbean: Solid-Liquid Separation and Component Distribution

In the last decade, Sargassum spp. seaweed species have caused massive flooding on the Caribbean Sea coasts. These seaweed species have a high content of recalcitrant compounds, such as insoluble fibers and polyphenols, which generate low methane yields in anaerobic digestion (AD). This study investigated the effect of solid-liquid separation of Sargassum biomass on biodegradability and methane yield. A biochemical methane potential (BMP) test was conducted with both fractions and raw biomass (RB). A mass balance was developed to assess the distribution of the components. The obtained liquid fraction (LF) showed high biodegradability and a high methane production rate, and it generated a methane yield of 159.7 ± 7.1 N L kg VS-1, a value that corresponds to approximately twice that achieved with RB and the solid fraction (SF). The component distribution analysis showed that about 90% of total solids (TS), volatile solids (VS), ash, carbon, and cellulose were retained in the SF. In conclusion, the LF had high biodegradability and methane yield. This suggests the potential for LFs of Sargassum biomass to be treated in large-scale high-load reactors; however, studies applied to SFs are needed because they retain a large amount of organic matter with low biodegradability.

Methane Biogas Production in Malaysia: Challenge and Future Plan

Biomethane is a sustainable energy that is produced from an organic and renewable resource. As the second-largest oil palm producer in the world, palm oil mill effluent (POME) is the primary source of biomethane generation in Malaysia. POME is the by-product of palm oil extraction and is extensively employed as a feedstock for the production of biomethane. Malaysia has an equatorial environment with humid and hot weather; this climate is conducive to the cultivation of numerous agricultural crops. A considerable number of agricultural wastes and residues are produced by agricultural crops, however, only 27% of them are used as fuel or to create useable products. Several publications have been published on the production of biomethane from POME; nevertheless, additional research is required on the use of other bioresources and technologies for biomethane production in Malaysia. In addition, there is a lack of comprehensive information on the future development of biomethane production in Malaysia; thus, to fill this gap, this review paper focuses on the challenges and future of Malaysia, which puts an emphasis on POME and also includes other alternative options of bioresources that can be the future feedstock for biomethane production in Malaysia. To the best of our knowledge, this is the first paper to provide a comprehensive overview of the biogas trend in Malaysia in terms of challenges and current biomethane development, as well as detailed information on a number of leading companies that are currently active in Malaysia biogas industry.

Microalgae-based wastewater treatment for developing economic and environmental sustainability: Current status and future prospects

Over the last several decades, concerns about climate change and pollution due to human activity has gained widespread attention. Microalgae have been proposed as a suitable biological platform to reduce carbon dioxide, a major greenhouse gas, while also creating commercial sources of high-value compounds such as medicines, cosmetics, food, feed, and biofuel. Industrialization of microalgae culture and valorization is still limited by significant challenges in scaling up the production processes due to economic constraints and productivity capacities. Therefore, a boost in resource usage efficiency is required. This enhancement not only lowers manufacturing costs but also enhancing the long-term viability of microalgae-based products. Using wastewater as a nutrient source is a great way to reduce manufacturing costs. Furthermore, water scarcity is one of the most important global challenges. In recent decades, industrialization, globalization, and population growth have all impacted freshwater resources. Moreover, high amounts of organic and inorganic toxins in the water due to the disposal of waste into rivers can have severe impacts on human and animal health. Microalgae cultures are a sustainable solution to tertiary and quaternary treatments since they have the ability to digest complex contaminants. This review presents biorefineries based on microalgae from all angles, including the potential for environmental pollution remediation as well as applications for bioenergy and value-added biomolecule production. An overview of current information about microalgae-based technology and a discussion of the associated hazards and opportunities for the bioeconomy are highlighted.

Integrated role of algae in the closed-loop circular economy of anaerobic digestion

Following the surging demand for sustainable biofuels, biogas production via anaerobic digestion (AD) presented itself as a solution for energy security, waste management, and greenhouse gas mitigation. Algal-based biorefinery platform serves an important role in the AD-based closed-loop circular economy. Other than using whole biomass of micro- and macroalgae as feedstock for biogas production, the integration of AD with other bio- or thermochemical conversion techniques can achieve complete valorization of biomass residue after processing or valuable compounds extraction. On the other hand, anaerobic digestate, the byproduct of AD processes can be used for microalgal cultivation for lipid and pigments accumulation, closing the loop of resource flow. Furthermore, algae and its consortium with bacteria or fungi can be employed for combined biogas upgrading and wastewater treatment. Innovative strategies have been developed to enhance biogas upgrading and pollutant removal performance as well as minimize O₂ and N₂ content in the upgraded biomethane.

Methane production from peroxymonosulfate pretreated algae biomass: Insights into microbial mechanisms, microcystin detoxification and heavy metal partitioning behavior

This study investigated the methane production potential of algal biomass by anerobic digestion with the addition of peroxymonosulfate (PMS), the removal of microcystin were analyzed and discussed. The microcystin concentration in the collected algal sludge was 1.20 μg/L in the liquid phase and 1393 μg/g in the algal sludge before anaerobic fermentation. The microcystin concentration decreased to 0.20-0.35 μg/L in the liquid phase and 4.16-11.51 μg/g in the sludge phase after 60 days of digestion. The initial PMS dose and residue microcystin concentration could be simulated with a logarithmic decay model (R² > 0.87). Anaerobic digestion could recover energy from algal source in the form of methane gas, which was not affected in the presence of microcystin, and the microcystin removal rate was >99%. Digestion decreased the total contents of Cd and Zn in the liquid phase and increased the total contents of Cr and Pb in the liquid phase. The microbial community and function prediction results indicated that the PMS0.1 system had the highest methane production, which was attributed to the high abundance of Mechanosaeta (40.52%). This study provides insights into microbial mechanisms, microcystin detoxification and the heavy metal partitioning behavior of the algal biomass during methane production.

Fed-batch anaerobic digestion of raw and pretreated hazelnut skin over long-term operation

This study provided important insights on the anaerobic digestion (AD) of hazelnut skin (HS) by operating a fed-batch AD reactor over 240 days and focusing on several factors impacting the process in the long term. An efficient reactor configuration was proposed to increase the substrate load while reducing the solid retention time during the fed-batch AD of HS. Raw HS produced maximally 19.29 mL CH₄/g VS_add/d. Polyphenols accumulated in the reactor and the use of NaOH to adjust the pH likely inhibited AD. Maceration and methanol-organosolv pretreatments were, thus, used to remove polyphenols from HS (i.e. 82 and 97%, respectively) and improve HS biodegradation. Additionally, organosolv pretreatment removed 9% of the lignin. The organosolv-pretreated HS showed an increment in methane potential of 21%, while macerated HS produced less methane than the raw substrate, probably due to the loss of non-structural sugars during maceration.

Synergetic approach for energy recovery from coastal wastes based on combination of biological and thermal treatment

Marine biomass is a promising renewable energy source, especially as this waste contains a large amount of cellulose and hemicellulose, which can contribute to convert it into energy products using anaerobic digestion (AD) and pyrolysis processes. This work was focused on a synergetic view of marine coastal waste treatment (seaweed) using two different technologies, anaerobic microbiological co-digestion, and pyrolysis. The experiments were performed with two merged technologies to assess the captured energy from the digestate in case it is contaminated. Anaerobic co-digestion was conducted using a periodic load laboratory bench with a vertical biogas digester. An evaluation of possible product yields and composition during pyrolysis at a laboratory-scale bench has been performed. The products obtained after the thermal treatment analyzed using an online gas measurement system and gas chromatographs Agilent 7890A with TCD detector (for gases) and Agilent 7890A with MS detector (for liquids).The results demonstrated that biogas yield was 174.1 l/kg (DM). Seaweed washed by seawater yields a higher amount of biogas (202.5 l/kg). Meanwhile, seaweed, sewage sludge, and digestate samples subjected to thermal treatment produced 17%, 30%, and 15% of liquids products, respectively. The economic performance assessment showed that the application of the developed merged approach on an industrial scale could provide an economic return of up to 8.3 $/100 kg of waste. Based on that, merged AD and pyrolysis technologies could be adapted as a promising technology to valorize seaweed wastes and utilize them as a new sustainable source for renewable energy.

Valorisation of algal biomass to value-added metabolites: emerging trends and opportunities

Algal biomass is a promising feedstock for sustainable production of a range of value-added compounds and products including food, feed, fuel. To further augment the commercial value of algal metabolites, efficient valorization methods and biorefining channels are essential. Algal extracts are ideal sources of biotechnologically viable compounds loaded with anti-microbial, anti-oxidative, anti-inflammatory, anti-cancerous and several therapeutic and restorative properties. Emerging technologies in biomass valorisation tend to reduce the significant cost burden in large scale operations precisely associated with the pre-treatment, downstream processing and waste management processes. In order to enhance the economic feasibility of algal products in the global market, comprehensive extraction of multi-algal product biorefinery is envisaged as an assuring strategy. Algal biorefinery has inspired the technologists with novel prospectives especially in waste recovery, carbon concentration/sequestration and complete utilisation of the value-added products in a sustainable closed-loop methodology. This review critically examines the latest trends in the algal biomass valorisation and the expansive feedstock potentials in a biorefinery perspective. The recent scope dynamics of algal biomass utilisation such as bio-surfactants, oleochemicals, bio-stimulants and carbon mitigation have also been discussed. The existing challenges in algal biomass valorisation, current knowledge gaps and bottlenecks towards commercialisation of algal technologies are discussed. This review is a comprehensive presentation of the road map of algal biomass valorisation techniques towards biorefinery technology. The global market view of the algal products, future research directions and emerging opportunities are reviewed.

The potential impact of an implementation of microalgae-based wastewater treatment on the energy balance of a municipal wastewater treatment plant in Central europe

Integration of a photobioreactor for WWT by microalgae is calculated as a future alternative for cost-efficient and environmentally-friendly nutrient removal for municipal WWTPs. High growth rates and higher biogas yields (compared to conventional sewage sludge) of algal biomass can significantly improve WWTP energy balances. This study focuses on temperate climate zones with changing seasons and discusses energy potential of microalgae-enhanced wastewater treatment for an existing WWTP (32,000 PE) in Central Germany. For WWTP-dimensioning and determination of energy-rich biomasses for anaerobic digestion and CHP, actual influent load data was used and calculation was carried out according to valid regulations. Algae growth figures are based on pilot-scale test series from Germany and correspond to the relevant climatic and local process conditions. Computed results show a shift in the energy balance from a current energy demand of 662,173kWh a^-1 to an energy production of approx. 1,9MWh_el. a^-1 and 1 MWh_th. a^-1.

Biosensor-informed engineering of Cupriavidus necator H16 for autotrophic D-mannitol production

Cupriavidus necator H16 is one of the most researched carbon dioxide (CO₂)-fixing bacteria. It can store carbon in form of the polymer polyhydroxybutyrate and generate energy by aerobic hydrogen oxidation under lithoautotrophic conditions, making C. necator an ideal chassis for the biological production of value-added compounds from waste gases. Despite its immense potential, however, the experimental evidence of C. necator utilisation for autotrophic biosynthesis of chemicals is limited. Here, we genetically engineered C. necator for the high-level de novo biosynthesis of the industrially relevant sugar alcohol mannitol directly from Calvin-Benson-Bassham (CBB) cycle intermediates. To identify optimal mannitol production conditions in C. necator, a mannitol-responsive biosensor was applied for screening of mono- and bifunctional mannitol 1-phosphate dehydrogenases (MtlDs) and mannitol 1-phosphate phosphatases (M1Ps). We found that MtlD/M1P from brown alga Ectocarpus siliculosus performed overall the best under heterotrophic growth conditions and was selected to be chromosomally integrated. Consequently, autotrophic fermentation of recombinant C. necator yielded up to 3.9 g/L mannitol, representing a substantial improvement over mannitol biosynthesis using recombinant cyanobacteria. Importantly, we demonstrate that at the onset of stationary growth phase nearly 100% of carbon can be directed from the CBB cycle into mannitol through the glyceraldehyde 3-phosphate and fructose 6-phosphate intermediates. This study highlights for the first time the potential of C. necator to generate sugar alcohols from CO₂ utilising precursors derived from the CBB cycle.

Shining a Light on Wastewater Treatment with Microalgae

Microalgae can produce biofuels, nutriceuticals, pigments and many other products, but commercialization has been limited by the cost of growing, harvesting and processing algal biomass. Nutrients, chiefly nitrogen and phosphorus, are a key cost for growing microalgae, but these nutrients are present in abundance in municipal wastewater where they pose environmental problems if not removed. This is not a traditional review article; rather, it is a fact-based set of suggestions that will have to be investigated by scientists and engineers. It is suggested that if microalgae were grown as biofilms rather than as planktonic cells, and if internal illumination rather than external illumination were employed, then the use of microalgae may provide useful improvements to the wastewater treatment process. The use of microalgae to remove nutrients from wastewater has been demonstrated, but has not yet been widely implemented due to cost, and because microalgae derived from wastewater treatment has not yet been demonstrated as a commercial source for value-added products. Future facilities are likely to be called Municipal Resource Recovery Facilities as wastewater will increasingly be viewed as a resource for water, biofuels, fertilizer, monitoring public health and value-added products. Advances in photonics will accelerate this transition.

Water resource recovery coupling microalgae wastewater treatment and sludge co-digestion for bio-wastes valorisation at industrial pilot-scale

This case study is part of a circular bioeconomy project for a winery company aiming to integrate a microalgae-based system within the existing facilities of the winery WWTP, promoting nutrient recovery and transformation into valuable products and bioenergy. Microalgae were used for wastewater treatment, removing N-NH₄⁺ (97%) and P-PO₄^-3 (93%). A pilot anaerobic reactor was used for batch anaerobic mono-digestion of secondary sludge (WAS) and for co-digestion of WAS and algal biomass. The methane yield using WAS from two different wine production seasons was 155.4 and 132.9 NL CH₄ kg VS^-1. Co-digestion led to the highest methane yield (225.8 NL CH₄ kg VS^-1). The application of the bio-wastes for fertilization was assessed through plant growth bioassays: mono- and co-digestion digestates and dry algal biomass enhanced plant biomass accumulation (growth indexes of 163%, 155% and 121% relative to those of the control - commercial amendment, respectively), demonstrating a lack of phytotoxicity.

Wastewater-based microalgal biorefineries for the production of astaxanthin and co-products: Current status, challenges and future perspectives

The freshwater microalgae Haematococcus pluvialis and Chlorella zofingiensis are attractive biorefinery feedstocks in view of their ability to simultaneously synthesize astaxanthin and other valuable metabolites. Nonetheless, there are concerns regarding the sustainability of such biorefineries due to the high freshwater footprint of microalgae cultivation. The integration of wastewater as an alternative growth media is a promising approach to reduce freshwater demand. Wastewater-based cultivation enables the recovery of essential nutrients required for microalgae growth and consequently results in phycoremediation of wastewater, thus promoting the concept of a circular economy and further enhancing the sustainability of the process. In this review, recent developments in wastewater-integrated cultivation of H. pluvialis and C. zofingiensis for astaxanthin production are discussed. Furthermore, prospective strategies for overcoming the inherent challenges of wastewater-based cultivation are reviewed. Moreover, the biorefinery potential of wastewater-grown H. pluvialis and C. zofingiensis is delineated and future perspectives of wastewater-based biorefineries are outlined.

Improving methane production from algal sludge anaerobic fermentation by peroxydisulfate (PDS) pretreatment

This study investigated the potential of improving methane production from algal sludge anaerobic digestion by peroxydisulfate (PDS) pretreatment. The results show that with PDS dosage at 0.02 g PDS/g algal sludge TSS, PDS added system has highest accumulative methane production after 60 days fermentation. The accumulative methane production was 1.08, 1.15, 1.14, 1.13, 1.08, 0.76, and 0.15 times as compared with control, at 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, and 1 g PDS/g algal sludge TSS added, respectively. The SCOD in the system was keep increasing with the increment of PDS dosage after 120 min pretreatment. The algal sludge dewatering rate was increased with adding of PDS as pretreatment. The addition of PDS has inhibited the activities of microbes involved in digestion, while the short chain fatty acids production was improved after 3 days digestion. One-substrate model can be used to simulate the methane yield. The hydrolysis rate was decreased after dosing with PDS, while highest actual and predicted accumulative methane yield was occurred at 0.02 g PDS/g algal sludge TSS. Proteobacteria has higher percentage when the PDS was not higher than 0.1 g PDS/g algal sludge TSS, Acetothermia has higher percentage at 0.01 g PDS/g algal sludge TSS. The microcystin-LR (MC-LR) in algal sludge was largely removed after digestion, including the intracellular MC-LR. The higher PDS dosage could cause heavy metal release from algae cell to the digestate during fermentation. The addition of PDS to algal sludge can improve the accumulative methane production and mitigate microcystin concentration.

Nature-Based Units as Building Blocks for Resource Recovery Systems in Cities

Cities are producers of high quantities of secondary liquid and solid streams that are still poorly utilized within urban systems. In order to tackle this issue, there has been an ever-growing push for more efficient resource management and waste prevention in urban areas, following the concept of a circular economy. This review paper provides a characterization of urban solid and liquid resource flows (including water, nutrients, metals, potential energy, and organics), which pass through selected nature-based solutions (NBS) and supporting units (SU), expanding on that characterization through the study of existing cases. In particular, this paper presents the currently implemented NBS units for resource recovery, the applicable solid and liquid urban waste streams and the SU dedicated to increasing the quality and minimizing hazards of specific streams at the source level (e.g., concentrated fertilizers, disinfected recovered products). The recovery efficiency of systems, where NBS and SU are combined, operated at a micro- or meso-scale and applied at technology readiness levels higher than 5, is reviewed. The importance of collection and transport infrastructure, treatment and recovery technology, and (urban) agricultural or urban green reuse on the quantity and quality of input and output materials are discussed, also regarding the current main circularity and application challenges.

Integrating the Carboxylate Platform into a Red Seaweed Biorefinery

Macroalgae are an important source of food, fertilizer, hydrocolloids, and healthful bioactive components. Macroalgae are also being considered sources of biofuels, which require minimal demands for arable land, fresh water, or fertilizers. In this study, we explored the possibility of developing a red seaweed biorefinery process to extract carrageenan while producing chemical or biofuel co-products derived from the carrageenan extraction wastes. A common approach to processing organic wastes is to generate biogas; however, in this study, we targeted a potentially higher value option by applying acidogenic digestion to convert extraction wastes to carboxylic acids and derived compounds. Using an open culture of microorganisms, wastes from a carrageenan extraction plant were converted to mixed carboxylic acids, which were then neutralized and thermally decomposed to a variety of ketones. Batch digestions of the wastes were carried out at temperatures of 35 °C and 55 °C. Either calcium carbonate or ammonium bicarbonate was used as buffer. A solid-liquid counter-current percolation fermentation was operated in four stages at 35 °C. Digestion produced carboxylic acids ranging in chain length from one to seven carbons. The mesophilic temperature gave higher carboxylic acid yield and longer chain acids, with the highest acid titer reaching 18 g L^-1. Thermal decomposition of carboxylate salts produced a mixture of ketones which contained acetone, 3-pentanone, 2-hexanone, 2-heptanone, 3-heptanone, and 4-octanone as major products. These ketones could be sold as chemicals or hydrogenated to form corresponding chain length secondary alcohols which deliver higher energy density than ethanol.

Key Targets for Improving Algal Biofuel Production

A number of technological challenges need to be overcome if algae are to be utilized for commercial fuel production. Current economic assessment is largely based on laboratory scale up or commercial systems geared to the production of high value products, since no industrial scale plant exits that are dedicated to algal biofuel. For macroalgae (‘seaweeds’), the most promising processes are anaerobic digestion for biomethane production and fermentation for bioethanol, the latter with levels exceeding those from sugar cane. Currently, both processes could be enhanced by increasing the rate of degradation of the complex polysaccharide cell walls to generate fermentable sugars using specifically tailored hydrolytic enzymes. For microalgal biofuel production, open raceway ponds are more cost-effective than photobioreactors, with CO2 and harvesting/dewatering costs estimated to be ~50% and up to 15% of total costs, respectively. These costs need to be reduced by an order of magnitude if algal biodiesel is to compete with petroleum. Improved economics could be achieved by using a low-cost water supply supplemented with high glucose and nutrients from food grade industrial wastewater and using more efficient flocculation methods and CO2 from power plants. Solar radiation of not <3000 h·yr−1 favours production sites 30° north or south of the equator and should use marginal land with flat topography near oceans. Possible geographical sites are discussed. In terms of biomass conversion, advances in wet technologies such as hydrothermal liquefaction, anaerobic digestion, and transesterification for algal biodiesel are presented and how these can be integrated into a biorefinery are discussed.

Multidimensional approaches of biogas production and up-gradation: Opportunities and challenges

The expanding interest towards biogas generation from biowaste via complex anaerobic digestion (AD) opened new avenues in the improvement of biogas production processes and their up-gradation. The adsorption/removal of impurities particularly hydrogen sulfide (H₂S) and carbon dioxide (CO₂) from the biogas stream will significantly improve the efficiency of biogas for its further use as a renewable energy fuel. The production and up-gradation of biogas rely upon the types of feedstocks, AD condition, microbial diversity, purification methods along with the application of various additives. In that context, this review aims to emphasize the current state of the art in the field of biogas production via AD using diverse bio-waste. Further, this review will critically explore the biogas up-gradation technologies adopted so far and their pros and cons. Finally, techno-economic and environmental impact assessment of the biogas production process will be underlined to make the process cost-effective and environmentally sustainable.

Wet organic waste treatment via hydrothermal processing: A critical review

There are several recent reviews published in the literature on hydrothermal carbonization, liquefaction and supercritical water gasification of lignocellulosic biomass and algae. The potential of hydrochar, bio-oil or synthesis gas production and applications have also been reviewed individually. The comprehensive review on the hydrothermal treatment of wet wastes (such as municipal solid waste, food waste, sewage sludge, algae) covering carbonization, liquefaction and supercritical water gasification, however, is missing in the literature which formed the basis of the current review paper. The current paper critically reviews the literature around the full spectrum of hydrothermal treatment for wet wastes and establishes a good comparison of the different hydrothermal treatment options for managing wet waste streams. Also, the role of catalysts as well as synthesis of catalysts using hydrothermal treatment of biomass has been critically reviewed. For the first time, efforts have also been made to summarize findings on modelling works as well as techno-economic assessments in the area of hydrothermal treatments of wet wastes. The study concludes with key findings, knowledge gaps and future recommendations to improve the productivity of hydrothermal treatment of wet wastes, helping improve the commercial viability and environmental sustainability.

Bio-products from algae-based biorefinery on wastewater: A review

Increasing resource demand, predicted fossil resources shortage in the near future, and environmental concerns due to the production of greenhouse gas carbon dioxide have motivated the search for alternative 'circular' pathways. Among many options, microalgae have been recently 'revised' as one of the most promising due to their high growth rate (with low land use and without competing with food crops), high tolerance to nutrients and salts stresses and their variability in biochemical composition, in so allowing the supply of a plethora of possible bio-based products such as animal feeds, chemicals and biofuels. The recent raising popularity of Circular Bio-Economy (CBE) further prompted investment in microalgae, especially in combination with wastewater treatment, under the twofold aim of allowing the production of a wide range of bio-based products while bioremediating wastewater. With the aim of discussing the potential bio-products that may be gained from microalgae grown on urban wastewater, this paper presents an overview on microalgae production with particular emphasis on the main microalgae species suitable for growth on wastewater and the obtainable bio-based products from them. By selecting and reviewing 76 articles published in Scopus between 1992 and 2020, a number of interesting aspects, including the selection of algal species suitable for growing on urban wastewater, wastewater pretreatment and algal-bacterial cooperation, were carefully reviewed and discussed in this work. In this review, particular emphasis is placed on understanding of the main mechanisms driving formation of microalgal products (such as biofuels, biogas, etc.) and how they are affected by different environmental factors in selected species. Lastly, the quantitative information gathered from the articles were used to estimate the potential benefits gained from microalgae grown on urban wastewater in Campania Region, a region sometimes criticized for poor wastewater management.

Anaerobic digestion and agronomic applications of microalgae for its sustainable valorization

Microalgae are considered potential candidates in biorefinery processes, and due to their biochemical properties, they can be used in the production of biofuels such as biogas, as well as for bioremediation of liquid effluents. The objective of this review is to study the current status of microalgae anaerobic digestion and agricultural uses (as bio-stimulants and biofertilizers), starting from microalgae cultivation. Indeed, the efficiency of these processes necessarily depends on the evaluation of different biotic and abiotic factors that affect the growth of microalgae. However, the adaptation and the optimization of process parameters on a large scale is also limited by energy and economic constraints. Moreover, the integration of biogas production processes with microalgae cultivation allows a nutrients and CO2 virtuous loop, thus promoting the sustainability of the process. Finally, this paper provides a general overview of biogas and biofertilizers production combination, as well as the related challenges and recommended future research perspectives to complement the gap in the literature.

Phycoremediation and biomass production from high strong swine wastewater for biogas generation improvement: An integrated bioprocess

This study investigated the phycoremediation process from swine digestate integrated with photosynthetic biomass and biogas production in the context of circular economy. Effects of total ammonia nitrogen (TAN) and pH on biomass productivity and nutrients removal, using a central rotational composite design, were evaluated. pH showed a significant effect on biomass productivity and phosphate removal. The strain Chlorella sorokiniana (LBA#39) was able to tolerate up to 1300 mg TAN L^-1 at neutral pH, with maximum biomass productivity of 198 mg DW L^-1 d^-1 and removal of 90 and 70 (%) of phosphate and nitrogen, respectively. The biomass harvested after phycoremediation from digestate showed high content of volatile solids (95.4%) and proteins (59.5%). Biochemical methane potential (BMP) from microalgae monodigestion was 292 ± 10 mL_NCH4 g_VSadd^-1. The use microalgae biomass addition in the biodigestion process increased up to 32.1% in biogas production. It is an attractive approach to integrating raw materials into existing agro-industrial facilities and improving biogas production, adopting the concept of circular economy and mitigating greenhouse gas emissions.

Recent Advances in Carbon Dioxide Conversion: A Circular Bioeconomy Perspective

Managing the concentration of atmospheric CO2 requires a multifaceted engineering strategy, which remains a highly challenging task. Reducing atmospheric CO2 (CO2R) by converting it to value-added chemicals in a carbon neutral footprint manner must be the ultimate goal. The latest progress in CO2R through either abiotic (artificial catalysts) or biotic (natural enzymes) processes is reviewed herein. Abiotic CO2R can be conducted in the aqueous phase that usually leads to the formation of a mixture of CO, formic acid, and hydrogen. By contrast, a wide spectrum of hydrocarbon species is often observed by abiotic CO2R in the gaseous phase. On the other hand, biotic CO2R is often conducted in the aqueous phase and a wide spectrum of value-added chemicals are obtained. Key to the success of the abiotic process is understanding the surface chemistry of catalysts, which significantly governs the reactivity and selectivity of CO2R. However, in biotic CO2R, operation conditions and reactor design are crucial to reaching a neutral carbon footprint. Future research needs to look toward neutral or even negative carbon footprint CO2R processes. Having a deep insight into the scientific and technological aspect of both abiotic and biotic CO2R would advance in designing efficient catalysts and microalgae farming systems. Integrating the abiotic and biotic CO2R such as microbial fuel cells further diversifies the spectrum of CO2R.

Potential applications of algae in biochemical and bioenergy sector

Algae have gained substantial importance as the most promising potential green fuel source across the globe and is on growing demand due to their antioxidant, anticancer, antiviral, antihypertensive, cholesterol reducing and thickening properties. Therefore, it has vast range of application in medicines, pharmaceutical, cosmetics, paper and nutraceutical industries. In this work, the remarkable ability of algae to convert CO₂ and other toxic compounds in atmosphere to potential biofuels, foods, feeds and high-value bioactive compounds is reviewed. Algae produce approximately 50% of the earth's oxygen using its photosynthetic activity, thus acting as a potent tool to mitigate the effects of air pollution. Further, the applicability of algae as a desirable energy source has also been discussed, as they have the potential to serve as an effective alternative to intermittent renewable energy; and also, to combustion-based fossil fuel energy, making them effective for advanced biofuel conversions. This work also evaluates the current applications of algae and the implications of it as a potential substrate for bioplastic, natural alternative to inks and for making paper besides high-value products. In addition, the scope for integrated biorefinery approach is also briefly explored in terms of economic aspects at the industrial scale, as such energy conversion mechanisms are directly linked with sustainability, thus providing a positive overall energy outlook.

Enhancement of euryhaline Asterarcys quadricellulare biomass production for improving biogas generation through anaerobic co-digestion with carbon rich substrate

The microalga was isolated from Muktsar, the southwestern zone of Indian Punjab and identified as Asterarcys quadricellulare BGLR5 (MF661929) by 18S rRNA sequence analysis. The optimization of various cultural factors by the Plackett-Burman and central composite (CCD) designs helped in discerning the significant cultural factors for the increased production of biomass and other functional components (chlorophyll, carbohydrate, lipid and protein). The optimal cultural conditions as per the model were pH 9.9, 81 μmol m^-2 s^-1 light intensity, 22 °C temperature, growth period of 25 days, NaNO₃ 12 mM, 15 mM NH₄Cl, and 7 mM K₂HPO₄. In comparison to the basal condition biomass (0.886 g L^-1), a 0.42-fold increase in biomass yield was attained. Further, the highest yield of biogas (P: 361.81 mL g^-1 VS) with enhanced biogas production rate (R _m: 8.19 mL g^-1 day^-1) was achieved in co-digesting paddy straw with Asterarcys quadricellulare biomass in 1:1 ratio compared to their digestion individually. Further, the co-digestion resulted in the positive synergistic effect which increased the observed biogas yield compared to the estimated yield by 11-58% depending upon the amount of algal biomass and paddy straw used. Hence, the present study signifies that the biomass of Asterarcys quadricellulare BGLR5 can be utilized as a co-substrate with paddy straw to enhance the biogas yield.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02792-x.

Hydroponic Farm Wastewater Treatment Using an Indigenous Consortium

Hydroponic farms produce wastewater that need to be treated before being released into the environment. A three-step screening process (microplate, batch, and semi-continuous flasks experiments) initially designed to select an efficient microalgae strain allowed the isolation of a consortium that naturally developed in the hydroponic farm wastewater. During the non-optimized semi-continuous experiments, the best performing microalgae strain, Scenedesmus obliquus UTEX393 and the wastewater-born consortium cultures achieved good average linear growth rate (0.186 and 0.198/d, respectively) and high average nitrogen removal rates (23.5 mgN/L/d and 21.9 mgN/L/d, respectively). Phosphorus removal was very high probably due to precipitation. An integrated process was designed to treat the hydroponic farm wastewater using the wastewater-born consortium. Despite relatively low coagulation efficiencies in the preliminary tests, when integrated in a continuous process, chitosan was efficient to harvest the naturally wastewater-born consortium. The process was also efficient for removing nitrate and phosphate in less than seven days (average removal of 98.2 and 87.1% for nitrate and phosphate, respectively). These very promising results will help to define a pre-industrial pilot process.

Screening of two freshwater green microalgae in pulp and paper mill wastewater effluents in Nova Scotia, Canada

In recent years, the use of microalgae as feedstock for many marketable products, such as animal/aqua feeds, bioplastics and fertilizers, has gained renewed interest due to their fast growth potential coupled with relatively high lipid, carbohydrate and nutrient content. An algal biorefinery at an industrial site has the potential to sustainably and profitably convert carbon dioxide emissions into microalgal biomass and concomitantly reduce nitrogen and phosphorus from wastewaters. Industrial wastewaters are a potential alternative to traditional media used for large-scale microalgal cultivation. Pulp and paper mills are major consumers of water resources and discharge a huge amount of water to nearby lakes or rivers. This study investigated whether pulp and paper mill waste water is suitable for microalgal cultivation with the aim of achieving significant biomass production. Six different process waters from one Canadian pulp and paper mill were tested with two freshwater green microalgae. All of these waters were unable to support growth of microalgae due to inadequate nutrient concentrations, colour, turbidity and possible toxicity issues.

Influence of Nitrogen and Phosphorus on Microalgal Growth, Biomass, Lipid, and Fatty Acid Production: An Overview

Microalgae can be used as a source of alternative food, animal feed, biofuel, fertilizer, cosmetics, nutraceuticals and for pharmaceutical purposes. The extraction of organic constituents from microalgae cultivated in the different nutrient compositions is influenced by microalgal growth rates, biomass yield and nutritional content in terms of lipid and fatty acid production. In this context, nutrient composition plays an important role in microalgae cultivation, and depletion and excessive sources of this nutrient might affect the quality of biomass. Investigation on the role of nitrogen and phosphorus, which are crucial for the growth of algae, has been addressed. However, there are challenges for enhancing nutrient utilization efficiently for large scale microalgae cultivation. Hence, this study aims to highlight the level of nitrogen and phosphorus required for microalgae cultivation and focuses on the benefits of nitrogen and phosphorus for increasing biomass productivity of microalgae for improved lipid and fatty acid quantities. Furthermore, the suitable extraction methods that can be used to utilize lipid and fatty acids from microalgae for biofuel have also been reviewed.

Isolation of Industrial Important Bioactive Compounds from Microalgae

Microalgae are known as a rich source of bioactive compounds which exhibit different biological activities. Increased demand for sustainable biomass for production of important bioactive components with various potential especially therapeutic applications has resulted in noticeable interest in algae. Utilisation of microalgae in multiple scopes has been growing in various industries ranging from harnessing renewable energy to exploitation of high-value products. The focuses of this review are on production and the use of value-added components obtained from microalgae with current and potential application in the pharmaceutical, nutraceutical, cosmeceutical, energy and agri-food industries, as well as for bioremediation. Moreover, this work discusses the advantage, potential new beneficial strains, applications, limitations, research gaps and future prospect of microalgae in industry.

Biocrude Oil from Algal Bloom Microalgae: A Novel Integration of Biological and Thermochemical Techniques

Algal bloom microalgae are abundant in polluted water systems, but their biocrude oil production potential via hydrothermal liquefaction (HTL) is limited. This study proposed a novel process that combined biological (dark fermentation) and thermochemical (HTL) techniques aimed at changing the feedstock characteristics to be more suitable for thermochemical conversion, herein named integrated dark fermentation-hydrothermal liquefaction (DF-HTL). DF-HTL conversion of algae significantly enhanced the biocrude oil yield (wt %), carbon content (mol), energy content (MJ), and energy conversion ratios by 9.8, 29.7, 40.0, and 61.0%, respectively, in comparison to the control. Furthermore, DF-HTL processing significantly decreased the aqueous byproduct yield (wt %), carbon content (mol), nitrogen content (mol), and ammonia content (mol) by 19.0, 38.4, 25.0, and 13.2%, respectively, in comparison to the control. Therefore, DF-HTL reduced the environmental impact associated with disposing of the wastewater byproduct. However, DF-HTL also augmented the nitrogen content (mol) of the biocrude oil by 42.2% in comparison to the control. The benefits of DF-HTL were attributed to the increased acid content, the incorporation of H₂ as a processing gas, and the enhancement of the Maillard reaction, which shifted the distribution of reaction products from the aqueous phase to the biocrude oil phase. This article provides insights into the efficacy of a novel integrated biological-thermochemical processing method with distinct environmental and energetic advantages over conventional HTL that heightens the biocrude oil yield for feedstocks with a high carbohydrate and a high protein content.

Experimental and Techno-Economic Study on the Use of Microalgae for Paper Industry Effluents Remediation

Humanity is facing some major global threats, namely lack of environmental sustainability, the energy crisis associated with the unsustainable reliance on fossil fuels, and water scarcity, which will be exacerbated with the rapid growth of urban areas. Researchers have drawn their attention to microalgae, photosynthetic microorganisms known for their environmental applications, such as wastewater remediation and lipids accumulation, to produce third-generation biofuels to solve some of these major issues. Considering this dual role, this study evaluated the potential of the microalga Chlorella vulgaris on nutrient removal from a paper industry effluent and bioenergy production. Firstly, experiments were performed to assess the potential of this microalga to: (i) successfully grow in different concentrations of a paper industry effluent (20% to 100%); and (ii) treat the industrial effluent, reducing phosphorus concentrations to values below the accepted legal limits. Then, a techno-economic assessment was performed to study the viability of a C. vulgaris biorefinery targeting the remediation of a paper industry effluent and bioenergy production. The results have shown that C. vulgaris was able to successfully grow and treat the paper industry effluent. Under these conditions, average biomass productivities determined for this microalga ranged between 15.5 ± 0.5 and 26 ± 1 mg dry weight (DW) L−1 d−1, with maximum biomass concentrations reaching values between 337 ± 9 and 495 ± 25 mg DW L−1 d−1. Moreover, final phosphorus concentrations ranged between 0.12 ± 0.01 and 0.5 ± 0.3 mg P L−1, values below the legal limits imposed by the Portuguese Environment Agency on the paper industry. Regarding the proposal of a microalgal biorefinery for the bioremediation of paper industry effluents with bioenergy production, the techno-economic study demonstrated that six of the seven studied scenarios resulted in an economically-viable infrastructure. The highest net present value (15.4 million euros) and lowest discounted payback period (13 years) were determined for Scenario 3, which assumed a photosynthetic efficiency of 3%, a lipids extraction efficiency of 75%, and an anaerobic digestion efficiency of 45%. Therefore, it was possible to conclude that besides being economically viable, the proposed biorefinery presents several environmental benefits: (i) the remediation of an industrial effluent; (ii) CO2 uptake for microalgal growth, which contributes to a reduction in greenhouse gases emissions; (iii) production of clean and renewable energy; (iv) soil regeneration; and (v) promotion of a circular economy.

Anaerobic digestion of microalgal biomass for bioenergy production, removal of nutrients and microcystin: current status

Using renewable microalgal biomass as active feedstocks for biofuels and bioproducts is explored to substitute petroleum-based fuels and chemicals. In the last few years, the importance of microalgae biomass has been realized as a renewable feedstock due to several positive attributes associated with it. Biorefinery via anaerobic digestion (AD) of microalgal biomass is a promising and sustainable method to produce value-added chemicals, edible products and biofuels. Microalgal biomass pretreatment is a significant process to enhance methane production by AD. Findings on the AD microbial community's variety and organization can give novel in turn on digester steadiness and presentation. This review presents a vital study of the existing facts on the AD microbial community and AD production. Co-digestion of microalgal biomass with different co-substrates was used in AD to enhance biogas production, and the process was economically viable with improved biodegradability. Microcystins, which are produced by toxic cyanobacterial blooms, create a severe hazard to environmental health. Anaerobic biodegradation is an effective method to degrade the microcystins and convert into nontoxic products. However, for the cost-effective conversion of biomass to energy and other beneficial byproducts, additional highly developed research is still required for large-scale AD of microalgal biomass.

The Effects of Halogenated Compounds on the Anaerobic Digestion of Macroalgae

The urgent need to replace fossil fuels has seen macroalgae advancing as a potential feedstock for anaerobic digestion. The natural methane productivity (dry weight per hectare) of seaweeds is greater than in many terrestrial plant systems. As part of their defence systems, seaweeds, unlike terrestrial plants, produce a range of halogenated secondary metabolites, especially chlorinated and brominated compounds. Some orders of brown seaweeds also accumulate iodine, up to 1.2% of their dry weight. Fluorine remains rather unusual within the chemical structure. Halogenated hydrocarbons have moderate to high toxicities. In addition, halogenated organic compounds constitute a large group of environmental chemicals due to their extensive use in industry and agriculture. In recent years, concerns over the environmental fate and release of these halogenated organic compounds have resulted in research into their biodegradation and the evidence emerging shows that many of these compounds are more easily degraded under strictly anaerobic conditions compared to aerobic biodegradation. Biosorption via seaweed has become an alternative to the existing technologies in removing these pollutants. Halogenated compounds are known inhibitors of methane production from ruminants and humanmade anaerobic digesters. The focus of this paper is reviewing the available information on the effects of halogenated organic compounds on anaerobic digestion.

A review of biochemical and thermochemical energy conversion routes of wastewater grown algal biomass

Microalgae are recognized as a potential source of biomass for obtaining bioenergy. However, the lack of studies towards economic viability and environmental sustainability of the entire production chain limits its large-scale application. The use of wastewaters economizes natural resources used for algal biomass cultivation. However, desirable biomass characteristics for a good fuel may be impaired when wastewaters are used, namely low lipid content and high ash and protein contents. Thus, the choice of wastewaters with more favorable characteristics may be one way of obtaining a more balanced macromolecular composition of the algal biomass and therefore, a more suitable feedstock for the desired energetic route. The exploration of biorefinery concept and the use of wastewaters as culture medium are considered as the main strategic tools in the search of this viability. Considering the economics of overall process, direct utilization of wet biomass using hydrothermal liquefaction or hydrothermal carbonization and anaerobic digestion is recommended. Among the explored routes, anaerobic digestion is the most studied process. However, some main challenges remain as little explored, such as a low energy pretreatment and suitable and large-scale reactors for algal biomass digestion. On the other hand, thermochemical conversion routes offer better valorization of the algal biomass but have higher costs. A biorefinery combining anaerobic digestion, hydrothermal carbonization and hydrothermal liquefaction processes would provide the maximum possible output from the biomass depending on its characteristics. Therefore, the choice must be made in an integrated way, aiming at optimizing the quality of the final product to be obtained. Life cycle assessment studies are critical for scaling up of any algal biomass valorization technique for sustainability. Although there are limitations, suitable integrations of these processes would enable to make an economically feasible process which require further study.

Natural Communities of Microalgae and Cyanobacteria from Eutrophicated Waters as Potential Co-substrates for Small-scale Biogas Production

The purpose of this study was to determine the biogas potential of biomass produced by microbiotic communities developed under natural conditions in freshwater systems such as ponds incorporated into agricultural landscapes. Natural communities of microalgae were collected from a small eutrophicated pond where dominant species were euglenoids (Lepocinclis species). Cyanobacterial communities dominated by Lyngbya species were taken from a domestic aquarium and cultivated under makeshift conditions. Experiments were done using dairy cow manure (DCM) for codigestion with natural communities of microalgae (MDM) and cyanobacteria (CDM) and conducted during 42 days in thermophilic regime. The total biogas yields were 421.40 and 383.34 mL/g volatile solids (VS), while the average methane contents were 63.97 and 64.06% for MDM and CDM, respectively. Our results indicate that the natural communities of microalgae and cyanobacteria used in this study possess the potential for biogas production, which is, in comparison with particular algal and cyanobacterial strains cultivated under strictly controlled cultivation conditions, more promising. Therefore, this study aims to motivate further investigations into the diverse natural communities of microalgae and cyanobacteria and pretreatments that are environmentally friendly and cost-effective and will eventually enhance small-scale biogas production on agricultural farms.