Biohydrogen Production from Lignocellulosic Biomass: Technology and Sustainability

Harnessing recalcitrant lignocellulosic biomass for enhanced biohydrogen production: Recent advances, challenges, and future perspective

Biohydrogen (Bio-H2) is widely recognized as a sustainable and environmentally friendly energy source, devoid of any detrimental impact on the environment. Lignocellulosic biomass (LB) is a readily accessible and plentiful source material that can be effectively employed as a cost-effective and sustainable substrate for Bio-H2 production. Despite the numerous challenges, the ongoing progress in LB pretreatment technology, microbial fermentation, and the integration of molecular biology techniques have the potential to enhance Bio-H2 productivity and yield. Consequently, this technology exhibits efficiency and the capacity to meet the future energy demands associated with the valorization of recalcitrant biomass. To date, several pretreatment approaches have been investigated in order to improve the digestibility of feedstock. Nevertheless, there has been a lack of comprehensive systematic studies examining the effectiveness of pretreatment methods in enhancing Bio-H2 production through dark fermentation. Additionally, there is a dearth of economic feasibility evaluations pertaining to this area of research. Thus, this review has conducted comparative studies on the technological and economic viability of current pretreatment methods. It has also examined the potential of these pretreatments in terms of carbon neutrality and circular economy principles. This review paves the way for a new opportunity to enhance Bio-H2 production with technological approaches.

Sustainable hydrogen production via microalgae: Technological advancements, economic indicators, environmental aspects, challenges, and policy implications

Hydrogen has emerged as an alternative energy source to meet the increasing global energy demand, depleting fossil fuels and environmental issues resulting from fossil fuel consumption. Microalgae-based biomass is gaining attention as a potential source of hydrogen production due to its green energy carrier properties, high energy content, and carbon-free combustion. This review examines the hydrogen production process from microalgae, including the microalgae cultivation technological process for biomass production, and the three main routes of biomass-to-hydrogen production: thermochemical conversion, photo biological conversion, and electrochemical conversion. The current progress of technological options in the three main routes is presented, with the various strains of microalgae and operating conditions of the processes. Furthermore, the economic and environmental perspectives of biomass-to-hydrogen from microalgae are evaluated, and critical operational parameters are used to assess the feasibility of scaling up biohydrogen production for commercial industrial-scale applications. The key finding is the thermochemical conversion process is the most feasible process for biohydrogen production, compared to the pyrolysis process. In the photobiological and electrochemical process, pure hydrogen can be achieved, but further process development is required to enhance the production yield. In addition, the high production cost is the main challenge in biohydrogen production. The cost of biohydrogen production for direct bio photolysis it cost around $7.24 kg-1; for indirect bio photolysis it costs around $7.54 kg-1 and for fermentation, it costs around $7.61 kg-1. Therefore, comprehensive studies and efforts are required to make biohydrogen production from microalgae applications more economical in the future.

Carbon Fibers for Bioelectrochemical: Precursors, Bioelectrochemical System, and Biosensors

Abstract

Carbon fibers (CFs) demonstrate a range of excellent properties including (but not limited to) microscale diameter, high hardness, high strength, light weight, high chemical resistance, and high temperature resistance. Therefore, it is necessary to summarize the application market of CFs. CFs with good physical and chemical properties stand out among many materials. It is believed that highly fibrotic CFs will play a crucial role. This review first introduces the precursors of CFs, such as polyacrylonitrile, bitumen, and lignin. Then this review introduces CFs used in BESs, such as electrode materials and modification strategies of MFC, MEC, MDC, and other cells in a large space. Then, CFs in biosensors including enzyme sensor, DNA sensor, immune sensor and implantable sensor are summarized. Finally, we discuss briefly the challenges and research directions of CFs application in BESs, biosensors and more fields.

Highlights

CF is a new-generation reinforced fiber with high hardness and strength.Summary precursors from different sources of CFs and their preparation processes.Introduction of the application and modification methods of CFs in BESs and biosensor.Suggest the challenges in the application of CFs in the field of bio-electrochemistry.Propose the prospective research directions for CFs.

Graphical abstract

Photobiological effects of converting biomass into hydrogen - Challenges and prospects

In comparison to other methods of producing hydrogen, the production of biohydrogen is significantly less harmful to the surrounding ecosystem when it was produced from the biological origin such as microalgae. It could take the place of conventional fossil fuels while avoiding the emission of greenhouse gases. The substrates such as food, agricultural waste, and industrial waste can be readily utilized after the necessary pretreatment, led to an increase in the yield of hydrogen. Improving the production of biofuels at each stage can have a significant impact on the final results, making this method a potentially useful instrument. As a consequence of this, numerous approaches to pretreat the algal biomass, numerous types of enzymes and catalyst that play a crucial role for hydrogen production, the variables that influence the production of hydrogen, and the potential applications of genetic engineering have all been comprehensively covered in this study.

Wastewater-derived biohydrogen: Critical analysis of related enzymatic processes at the research and large scales

Organic-rich wastewater is a feasible feedstock for biohydrogen production. Numerous review on the performance of microorganisms and the diversity of their communities during a biohydrogen process were published. However, there is still no in-depth overview of enzymes for biohydrogen production from wastewater and their scale-up applications. This review aims at providing an insightful exploration of critical discussion in terms of: (i) the roles and applications of enzymes in wastewater-based biohydrogen fermentation; (ii) systematical introduction to the enzymatic processes of photo fermentation and dark fermentation; (iii) parameters that affect enzymatic performances and measures for enzyme activity/ability enhancement; (iv) biohydrogen production bioreactors; as well as (v) enzymatic biohydrogen production systems and their larger scales application. Furthermore, to assess the best applications of enzymes in biohydrogen production from wastewater, existing problems and feasible future studies on the development of low-cost enzyme production methods and immobilized enzymes, the construction of multiple enzyme cooperation systems, the study of biohydrogen production mechanisms, more effective bioreactor exploration, larger scales enzymatic biohydrogen production, and the enhancement of enzyme activity or ability are also addressed.

Valorization of agricultural wastes for biofuel applications

Continuous environmental degradation, volatility in the oil market, and unimpressive functioning of fossil-based (FB) fuels in compression ignition engines have expanded the tempo of the search for alternative fuels. Due to the astronomical rise in global population, improved agricultural, commercial, and manufacturing activities, enhanced farming and other food production and utilization ventures, agricultural waste generation, renewable fuel consumption, and emission of toxic gases. The need for cost-effective, readily available, and environmentally benign agricultural waste to biofuels has never been more crucial. Biofuels are renewable, biodegradable, low-cost, and eco-friendly fuels that are produced by microorganisms from waste lignocellulosic biomass. Conversion of agricultural wastes to biofuel does not exacerbate food security, contributes to waste management, prevents environmental degradation, and ensures energy security. This study reviews the conversion of agricultural wastes into biofuels with special emphasis on bioethanol, biohydrogen, biobutanol, biomethane, biomethanol, and biodiesel for various applications. It is safe to conclude that wastes generated from agricultural activities and processes are useful and can be harnessed to meet the affordable and accessible global renewable energy target. The result of this investigation will improve the body of knowledge and provide novel strategies and pathways for the utilization of agricultural wastes. Going forward, more collaborative and interdisciplinary studies are required to evolve state-of-the-art, ecofriendly, and cost-effective conversion pathways for agricultural wastes to promote the utilization of the generated renewable fuels. More human, financial, and infrastructural investments are desirable to motivate the conversion of agricultural waste into biofuels to ensure environmental sanitation and sustainability, promote renewable fuel utilization, and avert the raging implosion of our planet.

Rhodopseudomonas palustris: A biotechnology chassis

Rhodopseudomonas palustris is an attractive option for biotechnical applications and industrial engineering due to its metabolic versatility and its ability to catabolize a wide variety of feedstocks and convert them to several high-value products. Given its adaptable metabolism, R. palustris has been studied and applied in an extensive variety of applications such as examining metabolic tradeoffs for environmental perturbations, biodegradation of aromatic compounds, environmental remediation, biofuel production, agricultural biostimulation, and bioelectricity production. This review provides a holistic summary of the commercial applications for R. palustris as a biotechnology chassis and suggests future perspectives for research and engineering.

Research on the electrocatalytic reduction of CO2 by microorganisms with a nano-titanium carburizing electrode

The reduction of CO₂ to organics using microbial electrosynthesis (MES) is currently a popular research direction in the environmental field. In this study, we evaluated the effect of the electrode material on the production of organics from CO₂ in microbial electrosynthesis with a mixed-culture biocathode. The electrode material is an important factor influencing electron transfer, since it directly affects the efficiency of CO₂ reduction. In this study, we compared the performance of a graphite electrode and a metal-based carbon hybrid material electrode for the electro-reduction of CO_2. The cathode potential was set to -0.8 V (vs Ag/AgCl). When the cathode material was changed from a graphite electrode to a nano-titanium carburizing electrode, the current density of MES increased from 1.66 ± 0.2 A·m^-2 to 2.75 ± 0.2 A·m^-2, acetate accumulation increased from 127 mg/L to 234 mg/L, butyrate accumulation increased from 46 mg/L to 86.5 mg/L, and the total electron recovery of MES increased to nearly 70%. The results show that improving electrode performance can effectively improve the efficiency of MES for reducing CO₂. Metal-based carbon hybrid materials have good biological affinity and stability and also have good electrochemical performance.

Validation of GreenH2armony® as a Tool for the Computation of Harmonised Life-Cycle Indicators of Hydrogen

The Life Cycle Assessment (LCA) methodology is often used to check the environmental suitability of hydrogen energy systems, usually involving comparative studies. However, these comparative studies are typically affected by inconsistent methodological choices between the case studies under comparison. In this regard, protocols for the harmonisation of methodological choices in LCA of hydrogen are available. The step-by-step application of these protocols to a large number of case studies has already resulted in libraries of harmonised carbon, energy, and acidification footprints of hydrogen. In order to foster the applicability of these harmonisation protocols, a web-based software for the calculation of harmonised life-cycle indicators of hydrogen has recently been developed. This work addresses—for the first time—the validation of such a tool by checking the deviation between the available libraries of harmonised carbon, energy, and acidification footprints of hydrogen and the corresponding tool-based harmonised results. A high correlation (R2 > 0.999) was found between the library- and tool-based harmonised life-cycle indicators of hydrogen, thereby successfully validating the software. Hence, this tool has the potential to effectively promote the use of harmonised life-cycle indicators for robust comparative LCA studies of hydrogen energy systems, significantly mitigating misinterpretation.

Fermentative Conversion of Two-Step Pre-Treated Lignocellulosic Biomass to Hydrogen

Fermentative hydrogen production via dark fermentation with the application of lignocellulosic biomass requires a multistep pre-treatment procedure, due to the complexed structure of the raw material. Hence, the comparison of the hydrogen productivity potential of different lignocellulosic materials (LCMs) in relation to the lignocellulosic biomass composition is often considered as an interesting field of research. In this study, several types of biomass, representing woods, cereals and grass were processed by means of mechanical pre-treatment and alkaline and enzymatic hydrolysis. Hydrolysates were used in fermentative hydrogen production via dark fermentation process with Enterobacter aerogenes (model organism). The differences in the hydrogen productivity regarding different materials hydrolysates were analyzed using chemometric methods with respect to a wide dataset collected throughout this study. Hydrogen formation, as expected, was positively correlated with glucose concentration and total reducing sugars amount (YTRS) in enzymatic hydrolysates of LCMs, and negatively correlated with concentrations of enzymatic inhibitors i.e., HMF, furfural and total phenolic compounds in alkaline-hydrolysates LCMs, respectively. Interestingly, high hydrogen productivity was positively correlated with lignin content in raw LCMs and smaller mass loss of LCM after pre-treatment step. Besides results of chemometric analysis, the presented data analysis seems to confirm that the structure and chemical composition of lignin and hemicellulose present in the lignocellulosic material is more important to design the process of its bioconversion than the proportion between the cellulose, hemicellulose and lignin content in this material. For analyzed LCMs we found remarkable higher potential of hydrogen production via bioconversion process of woods i.e., beech (24.01 mL H2/g biomass), energetic poplar (23.41 mL H2/g biomass) or energetic willow (25.44 mL H2/g biomass) than for cereals i.e., triticale (17.82 mL H2/g biomass) and corn (14.37 mL H2/g biomass) or for meadow grass (7.22 mL H2/g biomass).

A perspective on galactose-based fermentative hydrogen production from macroalgal biomass: Trends and opportunities

This review analyses the relevant studies which focused on hydrogen synthesis by dark fermentation of galactose from macroalgal biomass by discussing the inoculum-related pretreatments, batch fermentation and inhibition, continuous fermentation systems, bioreactor designs for continuous operation and ionic liquid-assisted catalysis. The potential for process development is also revisited and the challenges towards suppressing glucose dominance over a galactose-based hydrogen production system are presented. The key challenges in the pretreatment process aiming to achieve a maximum recovery of upgradable (fermentable) sugars from the hydrolysates and promoting the concomitant detoxification of the hydrolysates have also been highlighted. The research avenues for bioprocess intensification connected to enhance selective sugar recovery and effective detoxification constitute the critical steps to develop future red macroalgae-derived galactose-based robust biohydrogen production system.

CFD Optimization Process of a Lateral Inlet/Outlet Diffusion Part of a Pumped Hydroelectric Storage Based on Optimal Surrogate Models

The lateral inlet/outlet plays a critical role in the connecting tunnels of a water delivery system in a pumped hydroelectric storage (PHES). Therefore, the shape of the inlet/outlet was improved through computational fluid dynamics (CFD) optimization based on optimal surrogate models. The CFD method applied in this paper was validated by a physical experiment that was carefully designed to meet bidirectional flow requirements. To determine a good compromise between the generation and pump mode, reasonable weights were defined to better evaluate the overall performance. In order to find suitable surrogate models to improve the optimization process, the best suited surrogate models were identified by an optimal model selection method. The optimal configurations of the surrogate model for the head loss and the velocity distribution coefficient were the Kriging model with a Gaussian kernel and the Kriging model with an Exponential kernel, respectively. Finally, a multi-objective surrogate-based optimization method was used to determine the optimum design. The overall head loss coefficient and velocity distribution coefficients were 0.248 and 1.416. Compared with the original shape, the coefficients decrease by 6.42% and 40.28%, respectively. The methods and findings of this work may provide practical guidelines for designers and researchers.

Mo2C-induced hydrogen production enhances microbial electrosynthesis of acetate from CO2 reduction

BACKGROUND

Microbial electrosynthesis (MES) is a biocathode-driven process, in which electroautotrophic microorganisms can directly uptake electrons or indirectly via H₂ from the cathode as energy sources and CO₂ as only carbon source to produce chemicals.

RESULTS

This study demonstrates that a hydrogen evolution reaction (HER) catalyst can enhance MES performance. An active HER electrocatalyst molybdenum carbide (Mo₂C)-modified electrode was constructed for MES. The volumetric acetate production rate of MES with 12 mg cm^-2 Mo₂C was 0.19 ± 0.02 g L^-1 day^-1, which was 2.1 times higher than that of the control. The final acetate concentration reached 5.72 ± 0.6 g L^-1 within 30 days, and coulombic efficiencies of 64 ± 0.7% were yielded. Furthermore, electrochemical study, scanning electron microscopy, and microbial community analyses suggested that Mo₂C can accelerate the release of hydrogen, promote the formation of biofilms and regulate the mixed microbial flora.

CONCLUSION

Coupling a HER catalyst to a cathode of MES system is a promising strategy for improving MES efficiency.

Single pot bioconversion of prairie cordgrass into biohydrogen by thermophiles

The aim of the present work was to use a thermophilic consortium for H₂ production using lignocellulosic biomass in a single pot. The thermophilic consortium, growing at 60 °C utilized both glucose and xylose, making it an ideal source of microbes capable of utilizing and fermenting both hexose and pentose sugars. The optimization of pH, temperature, and substrate concentration increased the H₂ production from 1.07 mmol H₂/g of prairie cordgrass (PCG) to 2.2 mmol H₂/g PCG by using the thermophilic consortium. A sequential cultivation of a thermostable lignocellulolytic enzyme producing strain Geobacillus sp. strain WSUCF1 (aerobic) with the thermophilic consortium (anaerobic) further increased H₂ production with PCG 3-fold (3.74 mmol H₂/g PCG). A single pot sequential culturing of aerobic and anaerobic microbes can be sustainable and advantageous for industrial scale production of biofuels.

Assessment of hydrothermal pretreatment of various lignocellulosic biomass with CO2 catalyst for enhanced methane and hydrogen production

Hydrothermal pretreatment of five lignocellulosic substrates (i.e. wheat straw, rice straw, biomass sorghum, corn stover and Douglas fir bark) were conducted in the presence of CO₂ as a catalyst. To maximize disintegration and conversion into bioenergy (methane and hydrogen), pretreatment temperatures and subsequent pressures varied with a range of 26-175 °C, and 25-102 bars, respectively. Among lignin, cellulose and hemicelluloses, hydrothermal pretreatment caused the highest reduction (23-42%) in hemicelluloses while delignification was limited to only 0-12%. These reductions in structural integrity resulted in 20-30% faster hydrolysis rates during anaerobic digestion for the pretreated substrates of straws, sorghum, and corn stover while Douglas fir bark yielded 172% faster hydrolysis/digestion due to its highly refractory nature in the control. Furans and phenolic compounds formed in the pretreated hydrolyzates were below the inhibitory levels for methane and hydrogen production which had a range of 98-340 ml CH₄/g volatile solids (VS) and 5-26 ml H₂/g VS, respectively. Results indicated that hydrothermal pretreatment is able to accelerate the rate of biodegradation without generating high levels of inhibitory compounds while showing no discernible effect on ultimate biodegradation.

Unravelling biocomplexity of electroactive biofilms for producing hydrogen from biomass

Leveraging nature's biocomplexity for solving human problems requires better understanding of the syntrophic relationships in engineered microbiomes developed in bioreactor systems. Understanding the interactions between microbial players within the community will be key to enhancing conversion and production rates from biomass streams. Here we investigate a bioelectrochemical system employing an enriched microbial consortium for conversion of a switchgrass-derived bio-oil aqueous phase (BOAP) into hydrogen via microbial electrolysis (MEC). MECs offer the potential to produce hydrogen in an integrated fashion in biorefinery platforms and as a means of energy storage through decentralized production to supply hydrogen to fuelling stations, as the world strives to move towards cleaner fuels and electricity-mediated transportation. A unique approach combining differential substrate and redox conditions revealed efficient but rate-limiting fermentation of the compounds within BOAP by the anode microbial community through a division of labour strategy combined with multiple levels of syntrophy. Despite the fermentation limitation, the adapted abilities of the microbial community resulted in a high hydrogen productivity of 9.35 L per L-day. Using pure acetic acid as the substrate instead of the biomass-derived stream resulted in a three-fold improvement in productivity. This high rate of exoelectrogenesis signifies the potential commercial feasibility of MEC technology for integration in biorefineries.

Hydrogen production by the hyperthermophilic bacterium Thermotoga maritima part I: effects of sulfured nutriments, with thiosulfate as model, on hydrogen production and growth

BACKGROUND

Thermotoga maritima and T. neapolitana are hyperthermophile bacteria chosen by many research teams to produce bio-hydrogen because of their potential to ferment a wide variety of sugars with the highest theoretical H₂/glucose yields. However, to develop economically sustainable bio-processes, the culture medium formulation remained to be optimized. The main aim of this study was to quantify accurately and specifically the effect of thiosulfate, used as sulfured nutriment model, on T. maritima growth, yields and productivities of hydrogen. The results were obtained from batch cultures, performed into a bioreactor, carefully controlled, and specifically designed to prevent the back-inhibition by hydrogen.

RESULTS

Among sulfured nutriments tested, thiosulfate, cysteine, and sulfide were found to be the most efficient to stimulate T. maritima growth and hydrogen production. In particular, under our experimental conditions (glucose 60 mmol L^-1 and yeast extract 1 g L^-1), the cellular growth was limited by thiosulfate concentrations lower than 0.06 mmol L^-1. Under these conditions, the cellular yield on thiosulfate (Y X/Thio) could be determined at 3617 mg mmol^-1. In addition, it has been shown that the limitations of T. maritima growth by thiosulfate lead to metabolic stress marked by a significant metabolic shift of glucose towards the production of extracellular polysaccharides (EPS). Finally, it has been estimated that the presence of thiosulfate in the T. maritima culture medium significantly increased the cellular and hydrogen productivities by a factor 6 without detectable sulfide production.

CONCLUSIONS

The stimulant effects of thiosulfate at very low concentrations on T. maritima growth have forced us to reconsider its role in this species and more probably also in all thiosulfato-reducer hyperthermophiles. Henceforth, thiosulfate should be considered in T. maritima as (1) an essential sulfur source for cellular materials when it is present at low concentrations (about 0.3 mmol g^-1 of cells), and (2) as both sulfur source and detoxifying agent for H₂ when thiosulfate is present at higher concentrations and, when, simultaneously, the pH₂ is high. Finally, to improve the hydrogen production in bio-processes using Thermotoga species, it should be recommended to incorporate thiosulfate in the culture medium.

Biohydrogen production from enzymatic hydrolysis of food waste in batch and continuous systems

In this study, the feasibility of biohydrogen production from enzymatic hydrolysis of food waste was investigated. Food waste (solid-to-liquid ratio of 10%, w/v) was first hydrolyzed by commercial glucoamylase to release glucose (24.35 g/L) in the food waste hydrolysate. Then, the obtained food waste hydrolysate was used as substrate for biohydrogen production in the batch and continuous (continuous stirred tank reactor, CSTR) systems. It was observed that the maximum cumulative hydrogen production of 5850 mL was achieved with a yield of 245.7 mL hydrogen/g glucose (1.97 mol hydrogen/mol glucose) in the batch system. In the continuous system, the effect of hydraulic retention time (HRT) on biohydrogen production from food waste hydrolysate was investigated. The optimal HRT obtained from this study was 6 h with the highest hydrogen production rate of 8.02 mmol/(h·L). Ethanol and acetate were the major soluble microbial products with low propionate production at all HRTs. Enzymatic hydrolysis of food waste could effectively accelerate hydrolysis speed, improve substrate utilization rate and increase hydrogen yield.

Effect of organic loading rate on dark fermentative hydrogen production in the continuous stirred tank reactor and continuous mixed immobilized sludge reactor from waste pastry hydrolysate

Waste pastry (6%, w/v) was hydrolyzed by the produced glucoamylase and protease to obtain the glucose (19.8g/L) and free amino nitrogen (179mg/L) solution. Then, the effect of organic loading rate (OLR) (8-40kgCOD/(m³d)) on dark fermentative hydrogen production in the continuous stirred tank reactor (CSTR) and continuous mixed immobilized sludge reactor (CMISR) from waste pastry hydrolysate was investigated and compared. The maximum hydrogen production rate of CSTR (277.76mL/(hL)) and CMISR (320.2mL/(hL)) were achieved at OLR of 24kgCOD/(m³d) and 32kgCOD/(m³d), respectively. Carbon recovery ranged from 75.2-84.1% in the CSTR and CMISR with the balance assumed to be converted to biomass. One gram waste pastry could produce 0.33g (1.83mmol) glucose which could be further converted to 79.24mL (3.54mmol) hydrogen in the CMISR or 91.66mL (4.09mmol) hydrogen in the CSTR. This is the first study which reports dark fermentative hydrogen production from waste pastry.

Metabolic engineering of Propionibacterium freudenreichii subsp. shermanii for xylose fermentation

Propionibacterium freudenreichii cannot use xylose, the second most abundant sugar in lignocellulosic biomass. Although Propionibacterium acidipropionici can use xylose as a carbon source, it is difficult to genetically modify, impeding further improvement through metabolic engineering. This study identified three xylose catabolic pathway genes encoding for xylose isomerase (xylA), xylose transporter (xylT), and xylulokinase (xylB) in P. acidipropionici and overexpressed them in P. freudenreichii subsp. shermanii via an expression plasmid pKHEM01, enabling the mutant to utilize xylose efficiently even in the presence of glucose without glucose-induced carbon catabolite repression. The mutant showed similar fermentation kinetics with glucose, xylose, and the mixture of glucose and xylose, respectively, as carbon source, and with or without the addition of antibiotic for selection pressure. The engineered P. shermanii thus can provide a novel cell factory for industrial production of propionic acid and other value-added products from lignocellulosic biomass.

Biohydrogen production in the suspended and attached microbial growth systems from waste pastry hydrolysate

Waste pastry was hydrolyzed by glucoamylase and protease which were obtained from solid state fermentation of Aspergillus awamori and Aspergillus oryzae to produce waste pastry hydrolysate. Then, the effects of hydraulic retention times (HRTs) (4-12h) on hydrogen production rate (HPR) in the suspended microbial growth system (continuous stirred tank reactor, CSTR) and attached microbial growth system (continuous mixed immobilized sludge reactor, CMISR) from waste pastry hydrolysate were investigated. The maximum HPRs of CSTR (201.8mL/(h·L)) and CMISR (255.3mL/(h·L)) were obtained at HRT of 6h and 4h, respectively. The first-order reaction could be used to describe the enzymatic hydrolysis of waste pastry. The carbon content of the waste pastry remained 22.8% in the undigested waste pastry and consumed 77.2% for carbon dioxide and soluble microbial products. To our knowledge, this is the first study which reports biohydrogen production from waste pastry.