How Reliable Are Heat Pulse Velocity Methods for Estimating Tree Transpiration?

Comparing dual heat pulse methods with Péclet's number as universal switch to measure sap flow across a wide range

Accurate determination of sap flow over a wide measurement range is important for assessing tree transpiration. However, this is difficult to achieve by using a single heat pulse method. Recent attempts have been made to combine multiple heat pulse methods and have successfully increased the sap flow measurement range. However, relative performance of different dual methods has not yet been addressed, and selection of the numerical threshold used to switch between methods has not been verified among different dual methods. This paper evaluates three different dual methods with respect to measurement range, precision and sources of uncertainty: (method 1) the heat ratio (HR) and compensation heat pulse method; (method 2) the HR and T-max method; and (method 3) the HR and double ratio method. Field experiments showed that methods 1, 2 with three needles and 3 compare well with the benchmark Sapflow+ method, having root mean square deviations of 4.7 cm h-1, 3.0 cm h-1 and 2.4 cm h-1, respectively. The three dual methods are equivalent in accuracy (P > 0.05). Moreover, all dual methods can satisfactorily measure reverse, low and medium heat pulse velocities. However, for high velocities (>100 cm h-1), the HR + T-max (method 2) performed better than the other methods. Another advantage is that this method has a three- instead of four-needle probe configuration, making it less error prone to probe misalignment and plant wounding. All dual methods in this study use the HR method for calculating low to medium flow and a different method for calculating high flow. The optimal threshold for switching from HR to another method is HR's maximum flow, which can be accurately determined from the Péclet number. This study therefore provides guidance for an optimal selection of methods for quantification of sap flow over a wide measurement range.

Testing of a custom, portable drill press to minimize probe misalignment in sap flow sensors

The accurate estimation of plant transpiration is critical to the fields of hydrology, plant physiology and ecology. Among the various methods of measuring transpiration in the field, the sap flow methods based on head pulses offers a cost-effective and energy-efficient option to directly measure the plant-level movement of water through the hydraulically active tissue. While authors have identified several possible sources of error in these measurements, one of the most common sources is misalignment of the sap flow probes due to user error. Though the effects of probe misalignment are well documented, no device or technique has been universally adopted to ensure the proper installation of sap flow probes. In this paper we compare the magnitude of misalignment errors among a 5 mm thick drilling template (DT), a 10 mm thick DT, and a custom designed, field-portable drill press. The different techniques were evaluated in the laboratory using a 7.5 cm wood block and in the field, comparing differences in measured sap flow. Based on analysis of holes drilled in the wood block, we found that the portable drill press was most effective in assuring that drill holes remained parallel, even at 7.5 cm depth. In field installations, nearly 50% of holes drilled with a 5 mm template needed to be redrilled while none needed to be when drilled with the drill press. Widespread use of a portable drill press when implementing the heat pulse method would minimize alignment uncertainty and allow a clearer understanding of other sources of uncertainty due to variability in tree species, age, or external drivers or transpiration.

Assessing water stress in a high-density apple orchard using trunk circumference variation, sap flow index and stem water potential

Introduction

Automated plant-based measurements of water stress have the potential to advance precision irrigation in orchard crops. Previous studies have shown correlations between sap flow, line variable differential transform (LVDT) dendrometers and fruit tree drought response. Here we report season-long automated measurement of maximum daily change in trunk diameter using band dendrometers and heated needles to measure a simplified sap flow index (SFI).

Methods

Measurements were made on two apple cultivars that were stressed at 7 to 12 day intervals by withholding irrigation until the average stem water potential (ΨStem) dropped below -1.5 MPa, after which irrigation was restored and the drought cycle repeated.

Results

Dendrometer measurements of maximum daily trunk shrinkage (MDS) were highly correlated (r² = 0.85) with pressure chamber measurements of stem water potential. The SFI measurements were less correlated with stem water potential but were highly correlated with evaporative demand (r² = 0.82) as determined by the Penman-Monteith equation (ETr).

Discussion

The high correlation of SFI to ETr suggests that high-density orchards resemble a continuous surface, unlike orchards with widely spaced trees. The correlations of MDS and SFI to ΨStem were higher during the early season than the late season growth. Band dendrometers are less labor intensive to install than LVDT dendrometers and are non-invasive so are well suited to commercialization.

High abscisic acid and low root hydraulic conductivity may explain low leaf hydration in 'Mandarin' lime exposed to aluminum

The first symptom of aluminum (Al) toxicity is the inhibition of root growth, which has been associated with low leaf hydration, with negative consequences for leaf gas exchange including stomatal conductance (gs) observed in many plant species. Here we asked whether low leaf hydration occurs before or after the inhibition of root growth of Citrus × limonia Osbeck ('Mandarin' lime) cultivated for 60 days in nutrient solution with 0 and 1480 μM Al. The length, diameter, surface area and biomass of roots of plants exposed to Al were lower than control plants only at 30 days after treatments (DAT). Until the end of the study, estimated gs (measured by sap flow techniques) was lower than in control plants from 3 DAT, total plant transpiration (Eplant) and root hydraulic conductivity (Lpr) at 7 DAT, and midday leaf water potential (Ψmd) and relative leaf water content at 15 DAT. Abscisic acid (ABA) in leaves was twofold higher in Al-exposed plants 1 DAT, and in roots a twofold higher peak was observed at 15 DAT. As ABA in leaves approached values of control plants after 15 DAT, we propose that low gs of plants exposed to Al is primarily caused by ABA, and the maintenance of low gs could be ascribed to the low Lpr from 7 DAT until the end of the study. Therefore, the low leaf hydration in 'Mandarin' lime exposed to Al does not seem to be caused by root growth inhibition or by a simple consequence of low water uptake due to a stunted root system.

Sap flow velocities of Acer saccharum and Quercus velutina during drought: Insights and implications from a throughfall exclusion experiment in West Virginia, USA

Forest species composition mediates evapotranspiration and the amount of water available to human-use downstream. In the last century, the heavily forested Appalachian region has been undergoing forest mesophication which is the progressive replacement of xeric species (e.g. black oak (Quercus velutina)) by mesic species (e.g. sugar maple (Acer saccharum)). Given differences between xeric and mesic species in water use efficiency and rainfall interception losses, investigating the consequences of these species shifts on water cycles is critical to improving predictions of ecosystem responses to climate change. To meet this need, we quantified the degree to which the sap velocities of two dominant broadleaved species (sugar maple and black oak) in West Virginia, responded to ambient and experimentally altered soil moisture conditions using a throughfall exclusion experiment. We then used these data to explore how predictions of future climate under two emissions scenarios could affect forest evapotranspiration rates. Overall, we found that the maples had higher sap velocity rates than the oaks. Sap velocity in maples showed a stronger sensitivity to vapor pressure deficit (VPD), particularly at high levels of VPD, than sap velocity in oaks. Experimentally induced reductions in shallow soil moisture did not have a relevant impact on sap velocity. In response to future climate scenarios of increased vapor pressure deficits in the Central Appalachian Mountains, our results highlight the different degrees to which two important tree species will increase transpiration, and potentially reduce the water available to the heavily populated areas downstream.

Challenges and advances in measuring sap flow in agriculture and agroforestry: A review with focus on nuclear magnetic resonance

Sap flow measurement is one of the most effective methods for quantifying plant water use.A better understanding of sap flow dynamics can aid in more efficient water and crop management, particularly under unpredictable rainfall patterns and water scarcity resulting from climate change. In addition to detecting infected plants, sap flow measurement helps select plant species that could better cope with hotter and drier conditions. There exist multiple methods to measure sap flow including heat balance, dyes and radiolabeled tracers. Heat sensor-based techniques are the most popular and commercially available to study plant hydraulics, even though most of them are invasive and associated with multiple kinds of errors. Heat-based methods are prone to errors due to misalignment of probes and wounding, despite all the advances in this technology. Among existing methods for measuring sap flow, nuclear magnetic resonance (NMR) is an appropriate non-invasive approach. However, there are challenges associated with applications of NMR to measure sap flow in trees or field crops, such as producing homogeneous magnetic field, bulkiness and poor portable nature of the instruments, and operational complexity. Nonetheless, various advances have been recently made that allow the manufacture of portable NMR tools for measuring sap flow in plants. The basic concept of the portal NMR tool is based on an external magnetic field to measure the sap flow and hence advances in magnet types and magnet arrangements (e.g., C-type, U-type, and Halbach magnets) are critical components of NMR-based sap flow measuring tools. Developing a non-invasive, portable and inexpensive NMR tool that can be easily used under field conditions would significantly improve our ability to monitor vegetation responses to environmental change.

A low cost, low power sap flux device for distributed and intensive monitoring of tree transpiration

Accurate estimation of transpiration in individual trees is important for understanding plant responses to environmental drivers, closing the water balance in forest stands and catchments, and calibrating earth system models, among other applications. However, the cost and power consumption of commercial systems based on sap flow methods still limit their usage. We developed and tested a cost-effective (<$150), simple to construct, and energy efficient sap flux device based on the heat pulse method. Energy savings were achieved by reducing the voltage of heat pulses and using an internal clock to completely shut down the device between pulses. Device accuracy was confirmed by laboratory estimates of sap flow made on excised branches of Acer saccharum and Tsuga canadensis (adjusted R² = 0.96). In a 174-d field installation of 12 devices, batteries (eight rechargeable Ni-MH AA) needed to be replaced every 14 days. Sap flux measurements in the field tracked expected variations in vapor pressure deficit and tree phenology. The low cost, compact design, reliability, and power consumption of this device enable sap flux studies to operate with more replication and in more diverse ecological settings than has been practical in the past.

Influence of Environmental Factors on the Sap Flow Activity of the Golden Pear in the Growth Period of Karst Area in Southern China

Under extreme drought and climate change, golden pear trees have experienced problems such as yield reduction, dryness and death. This suggests that we know very little about the mechanisms regulating pear tree growth, assuming that meteorological factors positively influence plant sap flow. Based on this, we used the heat ratio method to monitor the sap flow of pear trees from June to December 2020, and recorded the changes in various environmental factors. The results showed that: (1) Sap flow velocity has obvious radial variability in tree sections; the sap flow velocity during the day was significantly higher than that at night (p < 0.05) and was higher in the growing season than in the non-growing season. (2) All environmental factors, except relative humidity and precipitation, were positively correlated with sap flow, vapor pressure deficit and photosynthetically active radiation, which are the key factors affecting daytime flow, and vapor pressure deficit and plant water potential are the key factors affecting nighttime flow. The linear regression results also showed that the daytime sap flow had a significant positive effect on the nighttime sap flow (p < 0.05). (3) The contribution of night flow to total daily flow varied from 17.3% to 50.7%, and most of the non-growing season values were above 40%. The results show that nighttime sap flow accounts for a significant portion of the pear tree’s water budget. Continuous irrigation during fruit enlargement and non-growing seasons will increase fruit yield and maintain plant sap flow activity to avoid death due to drought.

Tree Transpiration and Urban Temperatures: Current Understanding, Implications, and Future Research Directions

The expansion of an urban tree canopy is a commonly proposed nature-based solution to combat excess urban heat. The influence trees have on urban climates via shading is driven by the morphological characteristics of trees, whereas tree transpiration is predominantly a physiological process dependent on environmental conditions and the built environment. The heterogeneous nature of urban landscapes, unique tree species assemblages, and land management decisions make it difficult to predict the magnitude and direction of cooling by transpiration. In the present article, we synthesize the emerging literature on the mechanistic controls on urban tree transpiration. We present a case study that illustrates the relationship between transpiration (using sap flow data) and urban temperatures. We examine the potential feedbacks among urban canopy, the built environment, and climate with a focus on extreme heat events. Finally, we present modeled data demonstrating the influence of transpiration on temperatures with shifts in canopy extent and irrigation during a heat wave.

The importance of conduction versus convection in heat pulse sap flow methods

Heat pulse methods are a popular approach for estimating sap flow and transpiration. Yet, many methods are unable to resolve the entire heat velocity measurement range observable in plants. Specifically, the Heat Ratio (HRM) and Tmax heat pulse methods can only resolve slow and fast velocities, respectively. The Dual Method Approach (DMA) combines optimal data from HRM and Tmax to output the entire range of heat velocity. However, the transition between slow and fast methods in the DMA currently does not have a theoretical solution. A re-consideration of the conduction/convection equation demonstrated that the HRM equation is equivalent to the Péclet equation which is the ratio of conduction to convection. This study tested the hypothesis that the transition between slow and fast methods occurs when conduction/convection, or the Péclet number, equals one, and the DMA would be improved via the inclusion of this transition value. Sap flux density was estimated via the HRM, Tmax and DMA methods and compared with gravimetric sap flux density measured via a water pressure system on 113 stems from 15 woody angiosperm species. When the Péclet number ≤ 1, the HRM yielded accurate results and the Tmax was out of range. When the Péclet number > 1, the HRM reached a maximum heat velocity at approximately 15 cm hr -1 and was no longer accurate, whereas the Tmax yielded accurate results. The DMA was able to output accurate data for the entire measurement range observed in this study. The linear regression analysis with gravimetric sap flux showed an r2 of 0.541 for HRM, 0.879 for Tmax and 0.940 for DMA. With the inclusion of the Péclet equation, the DMA resolved the entire heat velocity measurement range observed across 15 taxonomically diverse woody species. Consequently, the HRM and Tmax are redundant sap flow methods and have been superseded by the DMA.

The Dual Method Approach (DMA) Resolves Measurement Range Limitations of Heat Pulse Velocity Sap Flow Sensors

Sap flow, the movement of fluid in the xylem of plants, is commonly measured with the heat pulse velocity (Vh) family of methods. The observable range of Vh in plants is ~−10 to ~+270 cm/h. However, most Vh methods only measure a limited portion of this range, which restricts their utility. Previous research attempted to extend the range of Vh methods, yet these approaches were analytically intensive or impractical to implement. The Dual Method Approach (DMA), which is derived from the optimal measurement ranges of two Vh methods, the Tmax and the heat ratio method (HRM), also known as the “slow rates of flow” method (SRFM), is proposed to measure the full range of sap flow observable in plants. The DMA adopts an algorithm to dynamically choose the optimal Vh measurement via the Tmax or HRM/SRFM. The DMA was tested by measuring sap flux density (Js) on Tecoma capensis (Thunb.) Lindl., stems and comparing the results against Js measured gravimetrically. The DMA successfully measured the entire range of Vh observed in the experiment from 0.020 to 168.578 cm/h, whereas the HRM/SRFM range was between 0.020 and 45.063 cm/h, and the Tmax range was between 2.049 cm/h and 168.578 cm/h. A linear regression of DMA Js against gravimetric Js found an R2 of 0.918 and error of 1.2%, whereas the HRM had an R2 of 0.458 and an error of 49.1%, and the Tmax had an R2 of 0.826 and an error of 0.5%. Different methods to calculate sapwood thermal diffusivity (k) were also compared with the kVand method showing better accuracy. This study demonstrates that the DMA can measure the entire range of Vh in plants and improve the accuracy of sap flow measurements.

Tree Water Dynamics in a Semi-Arid, Pinus brutia Forest

This study aims to examine interactions between tree characteristics, sap flow, and environmental variables in an open Pinus brutia (Ten.) forest with shallow soil. We examined radial and azimuthal variations of sap flux density (Jp), and also investigated the occurrence of hydraulic redistribution mechanisms, quantified nocturnal tree transpiration, and analyzed the total water use of P. brutia trees during a three-year period. Sap flow and soil moisture sensors were installed onto and around eight trees, situated in the foothills of the Troodos Mountains, Cyprus. Radial observations showed a linear decrease of sap flux densities with increasing sapwood depth. Azimuthal differences were found to be statistically insignificant. Reverse sap flow was observed during low vapor pressure deficit (VPD) and negative air temperatures. Nocturnal sap flow was about 18% of the total sap flow. Rainfall was 507 mm in 2015, 359 mm in 2016, and 220 mm in 2017. Transpiration was 53%, 30%, and 75%, respectively, of the rainfall in those years, and was affected by the distribution of the rainfall. The trees showed an immediate response to rainfall events, but also exploited the fractured bedrock. The transpiration and soil moisture levels over the three hydrologically contrasting years showed that P. brutia is well-adapted to semi-arid Mediterranean conditions.