Determination of Carbohydrate Composition in Mealworm (Tenebrio molitor L.) Larvae and Characterization of Mealworm Chitin and Chitosan

The Nutritional Quality of Commercially Bred Yellow Mealworm (Tenebrio molitor) Compared to European Union Nutrition Claims

Due to its potential as a sustainable protein source, the industrial relevance of Tenebrio molitor, known as yellow mealworm, is set to increase substantially. Given the novelty of its application in the food industry, knowledge is lacking regarding the nutritional quality of commercially farmed mealworms. This study investigated the nutritional composition of larvae from four different rearing facilities in Belgium and specifically investigated whether their nutritional profiles adhered to defined European nutrition claims (Regulation (EC) No. 1924/2006). In particular, the European nutrition claims "high in protein", "high unsaturated fat", "high in fibre" and "rich in P, Mg, K, Zn and Mn" were applicable for all mealworm samples on a dry matter basis. On a fresh matter basis, yellow mealworms were found to be "high in protein", "high unsaturated fat" and "low in sugar".

Low protein digestibility-corrected amino acid score and net nitrogen-to-protein conversion factor value of edible insects

The amount of chitin, a nitrogen-containing dietary fiber, in edible insects can mislead the exact nitrogen-to-protein conversion factor (NPF) and true protein content. We determined the amino acid score (AAS), protein digestibility-corrected AAS (PDCAAS), chitin content, and net NPF of five edible insects. Additionally, the effect of the amino acid composition of migratory locust on rat growth were investigated. The AAS of the insects were ranged from 63 to 94. The chitin contents were ranged from 1.6 g/100 g to 10.7 g/100 g. The PDCAAS, calculated by AAS and gut-intestinal digestibility, ranged from 44 to 81, which was lower than casein (97). The net NPF ranged from 4.93 to 5.76, which were lower than the conventional value. Dietary migratory locust, whose PDCAAS was the lowest, decreased growth and altered lipid metabolism. Therefore, a lower PDCAAS and overestimation of net NPF of insects can affect the true protein calculations and growth.

Effects of Organic Xenobiotics on Tenebrio molitor Larvae and Their Parasite Gregarina polymorpha

Environmental contamination with xenobiotics affects organisms and the symbiotic relations between them. A convenient object to study relationships between parasites and their hosts is the host-parasite system "Tenebrio molitor Linnaeus, 1758 (Coleoptera, Tenebrionidae)-Gregarina polymorpha (Hammerschmidt, 1838) Stein, 1848 (Eugregarinorida, Gregarinidae)". For this experiment, we took 390 T. molitor larvae and 24 organic compounds. Groups of mealworms, 15 in each, were subjected to those compounds for 10 days. Then, we recorded the vitality of both the larvae of T. molitor and G. polymorpha. To assess how G. polymorpha had affected the hosts' wellbeing, we looked for changes in the larvae's body mass and compared them to the number of gregarines in their intestines. The vitality of the larvae was inhibited by cyclopentanol and 2-naphthol. The intensity of gregarine invasion was reduced by diphenyl ether, benzyl alcohol, catechol, and 3-aminobenzoic acid. No effect on the number of gregarines was produced by 3,4,5-trihydroxybenzoic acid, cyclohexanemethanol, phenol, benzalkonium chloride, maleic anhydride, cyclohexanol, resorcin, benzoic acid, 2-methylfuran, terpinen-4-ol, 1-phenylethylamine, dibutyl phthalate, 3-furancarboxylic acid, 5-methyl furfural, 6-aminohexanoic acid, succinic anhydride, o-xylene, and benzaldehyde. In the infected T. molitor individuals, the mean number of G. polymorpha equaled 45 specimens per host. The groups of smaller mealworms had fewer gregarines. Positive correlation was seen between growth rates of T. molitor larvae and the intensity of invasion by gregarines.

Chitosan extraction from Amanita phalloides: yield, crystallinity, degree of deacetylation, azo dye removal and antibacterial properties

Chitosan, a biopolymer obtained from chitin, is known for its remarkable adsorption abilities for dyes, drugs, and fats, and its diverse array of antibacterial characteristics. This study explores the extraction and characterization of chitosan from the mycelium of Amanita phalloides. The moisture content, ash content, water binding capacity, fat binding capacity, and degree of deacetylation of the extracted chitosan were determined. The chitosan exhibited a high yield of 70%, crystallinity of 49.07%, a degree of deacetylation of 86%, and potent antimicrobial properties against both Gram-negative and Gram-positive bacteria. The study also examined the adsorption capabilities of chitosan to remove methylene blue (MB) dye by analysing specific factors like pH, reaction time, and MB concentration using the response surface model. The highest degree of MB dye removal was 91.6% at a pH of 6, a reaction time of around 60 min and an initial dye concentration of 16 ppm. This experimental design can be applied for chitosan adsorption of other organic compounds such as dyes, proteins, drugs, and fats.

Environmental Sustainability and Physicochemical Property Screening of Chitin and Chitin-Glucan from 22 Fungal Species

Thanks to its biobased character with embedded biogenic carbon, chitin can aid in the transition to a sustainable circular economy by replacing fossil carbon from the geosphere. However, meeting current demands for material availability and environmental sustainability requires alternative methods limiting conventional chemical and energy-consuming chitin extraction from crustaceans. To assist future chitinous bioproduct development, this work analyzes the physicochemical properties and potential environmental sustainability of fungal chitin-glucan complexes. A conventional isolation procedure using sodium hydroxide, a weak acid, and short reaction times are applied to the fruiting body of 22 fungal species. Besides, the valorization of underutilized waste streams including Agaricus bisporus and Agaricus brunnescens stipes is investigated. The carbohydrate analysis renders chitin fractions in the range of 9.5-63.5 wt %, while yields vary from 4.2 to 29.9%, and the N-acetylation degree in found in between 53.0 and 98.7%. The sustainability of the process is analyzed using life cycle assessment (LCA), providing impact quantification for global warming potential, terrestrial acidification, freshwater eutrophication, and water use. With 87.5-589.3 kg·CO2-equiv per kilo, potentially lower global warming potential values in comparison to crustacean chitin are achieved. The crystallinity degree ranged from 28 to 78%, while the apparent chitin crystalline size (L020) is between 2.3 and 5.4 nm. Ten of the species yield α-chitin coexisting with semicrystalline glucans. Zwitterionic properties are observed in aqueous solutions, shifting from cationic to anionic at pH 4.5. With its renewable carbon content, fungal chitin is an environmentally sustainable alternative for high-value applications due to its balance of minimal treatment, low carbon footprint, material renewability, ease of isolation, thermal stability, zwitterionic behavior, biodegradability, and noncytotoxicity.

Update on Chitin and Chitosan from Insects: Sources, Production, Characterization, and Biomedical Applications

Insects, renowned for their abundant and renewable biomass, stand at the forefront of biomimicry-inspired research and offer promising alternatives for chitin and chitosan production considering mounting environmental concerns and the inherent limitations of conventional sources. This comprehensive review provides a meticulous exploration of the current state of insect-derived chitin and chitosan, focusing on their sources, production methods, characterization, physical and chemical properties, and emerging biomedical applications. Abundant insect sources of chitin and chitosan, from the Lepidoptera, Coleoptera, Orthoptera, Hymenoptera, Diptera, Hemiptera, Dictyoptera, Odonata, and Ephemeroptera orders, were comprehensively summarized. A variety of characterization techniques, including spectroscopy, chromatography, and microscopy, were used to reveal their physical and chemical properties like molecular weight, degree of deacetylation, and crystallinity, laying a solid foundation for their wide application, especially for the biomimetic design process. The examination of insect-derived chitin and chitosan extends into a wide realm of biomedical applications, highlighting their unique advantages in wound healing, tissue engineering, drug delivery, and antimicrobial therapies. Their intrinsic biocompatibility and antimicrobial properties position them as promising candidates for innovative solutions in diverse medical interventions.

Sourcing chitin from exoskeleton of Tenebrio molitor fed with polystyrene or plastic kitchen wrap

In this work we have characterized and compared chitin sourced from exoskeleton of Tenebrio molitor larvae fed with polystyrene or plastic kitchen wrap combined with bran in the ratio 1: 1 with chitin sourced from larvae exoskeleton fed only with bran. Analysis of the frass by ATR-FTIR showed very similar spectra and confirmed degradation of the plastic feed components, while ATR-FTIR analysis of the exoskeleton verified the absence of any plastic residue. Deproteinization followed by demineralization produced 6.78-5.29 % chitin, showing that plastic (polystyrene or plastic kitchen wrap) in the larvae diet resulted in heavier insect exoskeleton, but yielded slightly less chitin, with the lowest value obtained for plastic kitchen wrap in the insect diet. The deacetylation degree of 98.17-98.61 % was determined from measured ATR-FTIR spectra. XRD analysis confirmed the presence of α-chitin with a crystallinity index of 66.5-62 % and crystallite size 4-5 nm. Thermogravimetric analysis showed similar degradation curves for all chitin samples, with two degradation steps. These results show that chitin sourced from exoskeleton of T. molitor larvae fed with plastic (polystyrene or plastic kitchen wrap) and contributing to significant biodegradation of major polluting materials can be a feasible and alternative source of chitin, further promoting a bio-circular economy.

Quality and staling characteristics of white bread fortified with lysozyme-hydrolyzed mealworm powder (Tenebrio molitor L.)

Edible insects have a low environmental impact but are rich in nutrients and have been promoted as alternative protein sources. However, adding insect flour to bread negatively affects the overall quality, especially loaf volume and textural properties. Furthermore, relevant studies on chitin are limited. Therefore, this study examined chitin hydrolysis using lysozymes to enhance the quality characteristics in defatted mealworm (Tenebrio molitor L.) powder (DF-M)-supplemented bread. The chitin hydrolysis degree by lysozymes was evaluated using the 3,5-dinitrosalicylic acid assay and matrix-assisted laser desorption ionization-time-of-flight mass spectrometry. The amount of chitin oligomers increased with time, and no significant difference in the hydrolysis efficiency between water and 400 mM acetate buffer was observed. Enzymatic hydrolysis improved the DF-M water- and oil-binding and antioxidant capacities. In addition, chitin hydrolysis increased the volume and softened the texture of white bread. In particular, bread supplemented with DF-M hydrolyzed for 4 h at 10 % had the highest moisture content among the mealworm-added bread groups during storage for 5 days. Moreover, sensory evaluation showed a positive effect of chitin hydrolysis on acceptability. Our findings indicate that chitin hydrolysis can improve the quality of bread containing insect additives. In conclusion, this study provides novel insights into producing high-quality and functional bakery products from edible insects by the enzymatic hydrolysis of edible insect powders and could expand the applications of edible insects as food ingredients.

The Influence of Different Sustainable Substrates on the Nutritional Value of Tenebrio molitor Larvae

Every year, over 30% of food production is wasted. However, promoting a sustainable food supply not only fosters economic stability in agriculture and the food industry, but also safeguards precious natural resources and ensures universal food access and safety. Therefore, the aim of the study was to determine how specific growth conditions (utilizing by-products: sprouted potatoes (1), wheat bran (2), brewers' spent grain (3), and a control sample with agar-agar gels (4)) affect the larvae of yellow mealworms (Tenebrio molitor). This includes their nutritional and energy value, consumer sensory profiling, and technological parameters of processing. The results have indicated that larvae reared on the substrate with wheat bran had the highest energy value, at 708.26 kcal. In larvae, the difference in protein content was not significant when changing the rearing conditions, and ranged between 48.54 and 59.18%. The larvae contained a significant content of fibers, with the highest amount detected in samples with brewers' spent grain. The data indicate that glucose and arabinose were distinctive to larvae. Our study has also revealed a statistical difference in ash content between larvae and the substrate, with higher levels of nitrogen, copper, and zinc detected in the larvae compared to the substrate. We have found that the salt was naturally occurring in the substrates, with the brewers' spent grain sample having the highest amount, at 1.83%. However, the control sample yielded the highest ratings, achieving a score of 7.30 for general smell acceptability. These findings emphasize the potential of utilizing various industrial and farm by-products as substrates for mealworms, transforming them into a sustainable and nutrient-rich food source. This contribution adds to the broader discourse on nutritional value and resource efficiency.

Nutritional Value of Banded Cricket and Mealworm Larvae

Insect farming is more ecological than traditional animal farming, as it requires less water and contributes to lower greenhouse gas emissions. In our study, banded cricket (BC) and mealworm larvae (ML) were analyzed. The proximate composition was determined according to Association of Official Analytical Chemists. The mineral content was determined by colorimetry and mass spectrometry. Fatty acid methyl esters (FAMEs) were obtained from the samples and separated using a gas chromatography apparatus, coupled with a mass spectrometer. Our research confirmed that insects are a rich source of protein, with ML containing significantly more protein than BC (74.41 and 65.66 g/100 g dry matter (DM), respectively). In terms of the content of macrominerals, ML was significantly richer than BC, especially in terms of magnesium content (8.75 g/100 g DM). In terms of the content of saturated fatty acids, BC contained almost twice as much as ML (40.05 and 24.74% of the sum of fatty acids, respectively). EPA and DHA were only detected in the fat of BC. The presented results prove that both ML and BC can be good sources of protein both in human and companion animal diets. The component that is predominantly high in insects is fat, with a favorable fatty acid profile, especially in terms of polyunsaturated fatty acids. This study contributes new knowledge on the nutritional value of edible insects. In this research, we included three different nitrogen conversion factors for crude protein content. Our results partially confirm previous studies by other authors, although they provide new information on the content of fatty acids.

The current state of research and potential applications of insects for resource recovery and aquaculture feed

Concerns about fishmeal use and its ecological footprints must be addressed for the aquaculture industry to move on as a sustainable food production sector. Through recent research outcomes, the insect-based meals in fish diets have promise and harnessed promises for commercial applications. In this midst, the efficiency of the selected insects in valorizing biological waste, as well as the nutritional profile of the harvested insects for use in fish diets, will be the driving forces behind such an approach. More extensive research has been published on the suitability of the waste substrate, the nutritional profiling of the meals, the level of substitution, the effects on growth, the immune physiology, and the flesh quality of the animals. Previously, there are only a few reviews available in insect protein applications in aqua feed that focused particularly on the nutritional quality and substitution levels. Considering the dearth of available work, the goal of this review is to provide a more comprehensive account of the resource recovery potential of insects and its derivatives, with a special emphasis on quality as determined by substrate used and processing techniques. Suggestions and policy implications for a sustainable approach to achieving a circular bio-economy of insect farming and its application in aquaculture are discussed for progression and advancement of the existing state of the art.

Enhancing the Nutritional Profile of Tenebrio molitor Using the Leaves of Moringa oleifera

Nowadays, more and more research is being carried out on various feeds of Tenebrio molitor larvae, in order to increase their nutritional value and render them a valuable component of the human diet. In this study, Moringa oleifera leaves were used in different proportions (up to 50%) to substitute wheat bran (the usually employed feed), in order to evaluate their effect on the growth and development of the larvae, as well as on their composition in crude protein, fat and fatty acids, ash, vitamins, and antioxidants. It was found that the addition of M. oleifera leaves in the feed had no negative impact on the development and survival of the insects, while an increase in their nutritional value was recorded. More specifically, an increase in the crude protein of up to 22.61% and vitamin C and A contents of up to 40.74% and 491.63%, respectively, was recorded. Therefore, the use of M. oleifera leaves as a feed additive is highly recommended for rearing T. molitor larvae to enhance the nutritional value of the insects.

Impact of the Addition of Tenebrio molitor and Hermetia illucens on the Physicochemical and Sensory Quality of Cooked Meat Products

The use of proteins from insects, plants, microalgae, fungi or bacteria as an alternative to proteins of animal origin such as meat, fish, eggs or milk can meet the worldwide protein demand in the future. As the consumption of whole insects might be problematic or unacceptable for many consumers, especially in European countries, the use of homogenized insects or protein extracts from insects for the production of products might be a possibility to overcome general acceptability problems. However, the quality criteria of these products have to be comparable with consumers' expectations with regard to known products. Therefore, in the present study, we produced a meat product, replaced 10% and 20% of the pork with homogenized larvae of Tenebrio molitor and Hermetia illucens, and determined different physicochemical and sensory parameters at production and during modified atmosphere storage for 21 days. Additionally, the alteration of different bacteria species during this storage was analyzed in challenge tests. After production, the addition of insects resulted in higher cooking losses and pH values in the products with 20% insects, higher pH and yellowness, lower lightness, protein and hardness results in the Hermetia products, as well as higher yellowness and lower protein and hardness values in the cooked meat products with Tenebrio molitor. During modified atmosphere storage, the color differences principally remained, whereas the concentrations of inoculated Bacillus cereus, Listeria monocytogenes and Escherichia coli were not influenced by the addition of insects to the cooked meat products. The sensory results of the insect products, especially at higher concentrations and with Hermetia illucens, worsened during modified atmosphere storage. The addition of homogenized insect larvae, especially at higher concentrations and particularly of Hermetia illucens, influences different physicochemical and sensory parameters of the cooked meat products.

Mitigating Effects of Tenebrio molitor Larvae Powder Administration in Mice with Dextran Sodium Sulfate (DSS)- Induced Colitis

BACKGROUND

Ulcerative colitis (UC) is an inflammatory bowel disease that affects people worldwide. The causes of UC are diverse, and symptoms include diarrhea, weight loss, anemia, rectal bleeding, and bloody stools. Tenebrio molitor larvae have recently gained attention as edible insects with various physiological and medical effects. Research on the anti-inflammatory effects of ingesting Tenebrio molitor larvae powder (TMLP) is being actively conducted. In this study, TMLP was administered to mice with dextran sodium sulfate (DSS)-induced colitis to investigate its effects in reducing colitis symptoms.

METHODS

Mice were initially given 3% DSS in water to induce colitis and then feed containing 0%, 2%, or 4% TMLP. Pathologic changes in colon tissues were assessed by histology, and neutrophil levels were measured by myeloperoxidase (MPO) assay. Levels of IL-1β, IL-6, and TNF-α were measured using real-time PCR and ELISA assays, and IκB and NF-kB protein levels were measured by western blotting.

RESULT

Disease Activity Index (DAI) scores and MPO activity were reduced in TMLP-treated mice, and colon length increased as much as normal mice. Pathologic changes in the colon tissues of DSS-induced mice were attenuated, and the expression of inflammatory cytokine genes IL-1β, IL-6, and TNF-α decreased. Concomitant decreases in the protein expression of IL-1β and IL-6 were confirmed using ELISA. Western blotting revealed that levels of phosphorylated forms of IκB and NF-κB also decreased.

CONCLUSION

These results show that feeding TMLP to DSS-induced mice inhibited the typical inflammatory pathway of colitis. Therefore, TMLP shows potential as a food additive that can help treat colitis.
.

Insect biorefinery: A circular economy concept for biowaste conversion to value-added products

With rapid growing world population and increasing demand for natural resources, the production of sufficient food, feed for protein and fat sources and sustainable energy presents a food insecurity challenge globally. Insect biorefinery is a concept of using insect as a tool to convert biomass waste into energy and other beneficial products with concomitant remediation of the organic components. The exploitation of insects and its bioproducts have becoming more popular in recent years. This review article presents a summary of the current trend of insect-based industry and the potential organic wastes for insect bioconversion and biorefinery. Numerous biotechnological products obtained from insect biorefinery such as biofertilizer, animal feeds, edible foods, biopolymer, bioenzymes and biodiesel are discussed in the subsequent sections. Insect biorefinery serves as a promising sustainable approach for waste management while producing valuable bioproducts feasible to achieve circular bioeconomy.

The Review of Cooking, Drying, and Green Extraction Methods on General Nutritional Properties of Mealworms and Locusts

The processing of edible insects as an alternative source of nutrition may be a key driver in the development of a sustainable food and feed system. This review will study two industrial types of insects-mealworms and locusts-and summarize evidence related to the impact of processing on their micro- and macronutritional characteristics. The focus will be on their potential use as food for human consumption as opposed to animal feed. Literature has indicated that these two insects have the potential to provide protein and fat qualities comparable to or better than traditional mammalian sources. For example, mealworms-the larval form of the yellow mealworm beetlepossess a higher fat content, while adult locusts are rich in fibers, especially chitin. However, due to the different matrix and nutrient compositions, the processing of mealworms or locusts at a commercial scale needs to be tailored to minimize nutritional loss and maximize cost efficiency. The stages of preprocessing, cooking, drying, and extraction are the most critical control points for nutritional preservation. Thermal cooking applications such as microwave technology have demonstrated promising results, but the generation of heat may contribute to a certain nutritional loss. In an industrial context, drying using freeze dry is the preferred choice due to its uniformity, but it can be costly while increasing lipid peroxidation. During the extraction of nutrients, the use of green emerging technologies such as high hydrostatic pressure, pulsed electric field, and ultrasound may provide an alternative method to enhance nutrient preservation.

Graphical Abstract

Waste Orange Peels as a Feed Additive for the Enhancement of the Nutritional Value of Tenebrio molitor

Lately, additional attention is being placed on edible insects, since they constitute an excellent, cost-efficient source of proteins with a low ecological footprint. Tenebrio molitor was the first insect that was considered edible by EFSA in 2021. This species can replace conventional protein sources and thus, it has the potential to be used in many different food products. In the present study, a food by-product that is commonly produced (i.e., albedo orange peel waste) was used as a feed additive for T. molitor larvae, in an effort to further improve the circular economy and enhance the nutritional value of the insects. To this end, bran, which is commonly used as feed for T. molitor larvae, was fortified with the albedo orange peel waste (up to 25% w/w). Larval performance, in terms of larval survival and growth, as well as the larval nutritional value, i.e., the content of protein, fat, carbohydrates, ash, carotenoids, vitamins A and C, and polyphenols, was evaluated. Based on the results, the increase in the percentage of orange peel albedos in T. molitor feed resulted in a subsequent increase in the content of larvae in carotenoids and vitamin A up to 198%, in vitamin C up to 46%, and an increase in the protein and ash content up to 32% and 26.5%, respectively. Therefore, the use of albedo orange peel waste for feeding of T. molitor larvae is highly recommended, since it results in larvae with enhanced nutritional value and at the same time, the utilization of this feeding substrate further lowers the cost of insect farming.

Tenebrio molitor as a Clean Label Ingredient to Produce Nutritionally Enriched Food Emulsions

Tenebrio molitor flour, a sustainable source of protein and bioactive compounds, was used as a clean label ingredient in order to reformulate a commercial hummus sauce, replacing egg yolk and modified starch, improving its nutritional quality. For this purpose, the impact of different concentrations of insect flour on the sauce was studied. Rheology properties, texture profile analysis, and the microstructure of the sauces were analyzed. Nutritional profile analysis was carried out, as well as bioactivity, namely the total phenolic content and the antioxidant capacity. Sensory analysis was conducted to determine the consumer's acceptance. At low concentrations (up to 7.5% of T. molitor flour) the sauce structure remained practically unchanged. However, for higher additions of T. molitor (10% and 15%), a loss of firmness, adhesiveness and viscosity was observed. Structure parameters such as elastic modulus (G') at 1 Hz of the sauces with 10% and 15% were significantly lower than the commercial sauce, indicating a loss of structure caused by Tenebrio flour incorporation. Although the formulation with 7.5% T. molitor flour was not the best rated in the sensory analysis, it showed a higher antioxidant capacity compared to the commercial standard. In addition, this formulation also presented the highest concentration in total phenolic compounds (16.25 mg GAE/g) and significantly increased the content of proteins (from 4.25% to 7.97%) and some minerals, compared to the standard.

Effects of Polystyrene Diet on the Growth and Development of Tenebrio molitor

In recent years, the role of Tenebrio molitor in degrading polystyrene foam through its gut microbes has become the focus of research. However, little literature has reported the effect of feeding on polystyrene foam on the growth and development of Tenebrio molitor. In this study, we investigated the impacts of different polystyrene by evaluating the vital signs of Tenebrio molitor fed in the intestines and excrement fluids using RNA-Seq t.echnology and then verifying the transcriptome sequencing findings using qRT-PCR technology. The average weight of Tenebrio molitor larvae in the wheat bran group increased significantly. Tenebrio molitor larvae in the PS group, on the other hand, didn't grow as much and had a much lower average weight than those in the wheat bran group. Compared to the bran group, the excrement of Tenebrio molitor fed only on polystyrene foam was flaky and coarse, increased nitrogen and phosphorus atomic concentration ratios by about 50%, decreased potassium atomic concentration ratios by 63%, with the enterocytes and circular muscle of Tenebrio molitor falling as well. Kyoto Encyclopedia of Genes and Genomes enrichment indicated that the differential genes were mainly related to metabolic pathways. There was an agreement between qRT-PCR and RNA-Seq analyses for the growth and development genes chitinase, heat shock protein 70, and cytochrome P450. Only feeding polystyrene foam shall lead to the growth and development retardation of Tenebrio molitor.

Optimized Clarification Technology of Bayberry Juice by Chitosan/Sodium Alginate and Changes in Quality Characteristics during Clarification

In this study, a novel method to clarify bayberry juice with composite clarifiers, chitosan and sodium alginate, has been designed. The optimal conditions were as follows: using chitosan 0.05 g/L first and then sodium alginate 0.05 g/L as composite clarifiers, standing for 2 h at 25 °C. The transmittance increased from 0.08 to 91.2% after treating by composite clarifiers, which was significantly higher than using chitosan (44.29%) and sodium alginate (38.46%) alone. It was also found that sedimentation time of juice treated by composite clarifiers was about 60% shorter than using single clarifiers. Meanwhile, the reduction of anthocyanin in juice was 9.16% for composite clarifiers treatment, being less than that for the single sodium alginate and previous related researches. In addition, the color and aroma of bayberry juice treated by composite clarifiers were improved. Juice treated by composite clarifiers had the highest L* value with 52.48 and looked more attractive. The present research revealed that content of beta-damascenone and dihydro-5-pentyl-2(3H)-furanone increased after treatment with composite clarifiers which contributed more to the pleasant aroma. Overall, the developed method improved the clarification effect and sensory quality, and reduced the sedimentation time, which may be promising in the production of clear bayberry juice.

Tenebrio molitor as a source of interesting natural compounds, their recovery processes, biological effects, and safety aspects

Nowadays, it is urgent to produce in larger quantities and more sustainably to reduce the gap between food supply and demand. In a circular bioeconomy vision, insects receive great attention as a sustainable alternative to satisfy food and nutritional needs. Among all insects, Tenebrio molitor (TM) is the first insect approved by the European Food Safety Authority as a novel food in specific conditions and uses, testifying its growing relevance and potential. This review holistically presents the possible role of TM in the sustainable and circular solution to the growing needs for food and nutrients. We analyze all high value-added products obtained from TM (powders and extracts, oils and fatty acids, proteins and peptides, and chitin and chitosan), their recovery processes (evaluating the best ones in technical and environmental terms), their nutritional and economical values, and their biological effects. Safety aspects are also mentioned. TM potential is undoubted, but some aspects still need to be discussed, including the health effects of substances and microorganisms in its body, the optimal production conditions (that affect product quality and safety), and TM capacity to convert by-products into new products. Environmental, economic, social, and market feasibility studies are also required to analyze the new value chains. Finally, to unlock the enormous potential of edible insects as a source of nutritious and sustainable food, it will be necessary to overcome the cultural, psychological, and regulatory barriers still present in Western countries.

Mealworm (Tenebrio molitor): Potential and Challenges to Promote Circular Economy

Simple Summary

The main objective of this review is to analyse the potential of insects from the perspective of circular economy, focusing our attention on mealworm larvae. After pointing out the key concepts of circular economy and describing the use of insects in bioconversion processes, we discuss the most relevant uses of the mealworm in different industries, which show the great contribution this insect can make within circular productive systems. This topic has attracted a lot of attention due to its implications from an economic and environmental point of view. Recently, mealworm larvae were positively assessed by European Food Safety Authority (EFSA) as a safe novel food. As a matter of fact, the mealworm is the first edible insect to achieve this important milestone in the EU. Due to this new scientific opinion, considerable expectations arise on mealworms and their potential in different fields, which will surely lead to market developments in the following years.

Abstract

Over the last few years, the concept of Circular Economy (CE) has received a lot of attention due to its potential contribution to the Sustainable Development Goals (SDGs), especially by reconciling economic growth with the protection of the environment through its grow-make-use-restore approach. The use of insects in circular production systems has been a good example of this concept as insects can transform a wide range of organic waste and by-products into nutritious feedstuffs, which then go back into the production cycle. This paper explores the potential of mealworms (Tenebrio molitor) in circular production systems by reviewing their use and applicability in several industries such as pharmaceuticals, agriculture, food, etc. Despite the high versatility of this insect and its potential as a substitute source of nutrients and other valuable components, there are still many legislative and behavioural challenges that hinder its adoption and acceptance.