Microencapsulation of Pineapple Peel Extract by Spray Drying Using Maltodextrin, Inulin, and Arabic Gum as Wall Matrices

Sweet tea extract encapsulated by different wall material combinations with improved physicochemical properties and bioactivity stability

Aim: To prepare sweet tea extract microcapsules (STEMs) via a spray-drying by applying different wall material formulations with maltodextrin (MD), inulin (IN), and gum arabic (GA). Methods: The microcapsules were characterised by yield, encapsulation efficiency (EE), particle size, sensory evaluation, morphology, attenuated total reflectance-Fourier transform infra-red spectroscopy and in vitro digestion studies. Results: The encapsulation improved the physicochemical properties and bioactivity stability of sweet tea extract (STE). MD5IN5 had the highest yield (56.33 ± 0.06% w/w) and the best EE (e.g. 88.84 ± 0.36% w/w of total flavonoids). MD9GA1 obtained the smallest particle size (642.13 ± 4.12 nm). MD9GA1 exhibited the highest retention of bioactive components, inhibition of α-glucosidase (96.85 ± 0.55%), α-amylase (57.58 ± 0.99%), angiotensin-converting enzyme (56.88 ± 2.20%), and the best antioxidant activity during in vitro gastrointestinal digestion. Conclusion: The encapsulation of STE can be an appropriate way for the valorisation of STE with improved properties.

Stability of Buriti Oil Microencapsulated in Mixtures of Azuki and Lima Bean Flours with Maltodextrin

Buriti oil (Mauritia flexuosa L.) is rich in carotenoids, mainly β-carotene, and has great value for application as a food, pharmaceutical, or cosmetic ingredient, as well as a natural pigment. Microencapsulation is a promising technique to protect compounds sensitive to degradation such as β-carotene. Materials composed of carbohydrates and proteins, such as azuki bean (Vigna angularis L.) and lima bean (Phaseolus lunatus L.) flours, are alternative matrices for microencapsulation, which additionally provide good amounts of nutrients. In combination with maltodextrin, the flours represent a protective barrier in stabilizing lipophilic compounds such as buriti oil for subsequent spray drying. In this work, the performance of mixtures of maltodextrin with whole azuki and lima bean flours was evaluated in the microencapsulation of buriti oil. The microcapsules showed good results for solubility (>80%), hygroscopicity (~7%), encapsulation efficiency (43.52 to 51.94%), and carotenoid retention (64.13 to 77.49%.) After 77 days of storage, the microcapsules produced maintained 87.79% and 90.16% of carotenoids, indicating that the powders have high potential for application as encapsulants in the food and pharmaceutical industries.

Encapsulation of W/O/W Acerola Emulsion by Spray Drying: Optimization, Release Kinetics, and Storage Stability

Acerola (Malpighia emarginata DC.) is a sub-tropical and tropical fruit renowned for its high levels of vitamin C and phenolic compounds, which offer health benefits. This study aimed to optimize the spray drying process by determining the inlet and outlet temperatures using response surface methodology (RSM) with the central composite design. Additionally, it aimed to evaluate the release kinetics in the hydrophilic food simulation environment and the stability of the resulting powder under various storage temperatures. The RSM method determined the optimal inlet and outlet temperatures as 157 °C and 91 °C, respectively. High-accuracy prediction equations (R2 ≥ 0.88) were developed for moisture content (3.02%), process yield (91.15%), and the encapsulation yield of total polyphenol content (61.44%), total flavonoid content (37.42%), and vitamin C (27.19%), with a predicted monolayer moisture content below 4.01%, according to the BET equation. The powder exhibited good dissolution characteristics in the acidic hydrophilic food simulation environment and showed greater stability when stored at 10 °C for 30 days, compared to storage at 35 °C and 45 °C.

Porous Starch-inulin Loaded Quercetin Microcapsules: Characterization, Antioxidant Activity, in-vitro Release, and Storage Stability

Quercetin (Q) has many potential health benefits, but its low stability limits its use in functional foods and pharmaceuticals. The low stability of quercetin is a challenge that needs to be addressed to fully realize its therapeutic potential. The purpose of this study was therefore to design a proper carrier based on porous starch (PS) and inulin (IN) in order to improve the stability of Q. The scanning electron microscopy (SEM) images denoted that the Q molecules were adsorbed in the PS pores and partially adhered to the surface of the granules. Both types of the wall material could remarkably enhance the protection of Q against thermal and light degradation. The retention index of Q under different environmental conditions was higher for the PS:IN-Q than PS-Q. The results of Fourier transform infrared spectroscopy (FT-IR) revealed that Q interacted with the wall materials through non-covalent bonds. X-ray diffraction (XRD) also confirmed the encapsulation of Q in the wall materials. The bonding between Q and the hydrogen groups of starch compacted the crystalline regions and increased the relative crystallinity in PS-Q and PS:IN-Q. The DPPH and ABTS scavenging activities of the microcapsules containing the PS and IN were higher than those of free Q. Examination of the in-vitro release profile indicated that the Q release rate was lower from the PS:IN-Q microcapsules (21.6%) than from the PS-Q ones (33.7%). Our findings highlight the significant potential of this novel biopolymer mixture (PS/IN) as a promising wall material for the protection and delivery of bioactive compounds.

Application of inulin for the formulation and delivery of bioactive molecules and live cells

Inulin is a fructan biosynthesized mainly in plants of the Asteraceae family. It is also found in edible vegetables and fruits such as onion, garlic, leek, and banana. For the industrial production of inulin, chicory and Jerusalem artichoke are the main raw material. Inulin is used in the food, pharmaceutical, cosmetic as well biotechnological industries. It has a GRAS status and exhibits prebiotic properties. Inulin can be used as a wall material in the encapsulation process of drugs and other bioactive compounds and the development of their delivery systems. In the review, the use of inulin for the encapsulation of probiotics, essential and fatty oils, antioxidant compounds, natural colorant and other bioactive compounds is presented. The encapsulation techniques, materials and the properties of final products suitable for the delivery into food are discussed. Research limitations are also highlighted.

Alginate-Based Carriers Loaded with Mulberry (Morus alba L.) Leaf Extract: A Promising Strategy for Prolonging 1-Deoxynojirimicyn (DNJ) Systemic Activity for the Nutraceutical Management of Hyperglycemic Conditions

The iminosugar 1-deoxynojirimicyn (DNJ) contained in mulberry leaves has displayed systemic beneficial effects against disorders of carbohydrate metabolism. Nevertheless, its effect is impaired by the short half-life. Alginate-based carriers were developed to encapsulate a DNJ-rich mulberry extract: Ca-alginate beads, obtained by external gelation, and spray-dried alginate microparticles (SDMs). Mean size and distribution, morphology, drug loading, encapsulation efficiency, experimental yield, and release characteristics were determined for the two formulations. Ca-alginate beads and SDMs exhibited an encapsulation efficiency of about 54% and 98%, respectively, and a DNJ loading in the range of 0.43-0.63 μg/mg. The in vitro release study demonstrated the carriers' capability in controlling the DNJ release in acid and basic conditions (<50% in 5 h), due to electrostatic interactions, which were demonstrated by 1H-NMR relaxometry studies. Thus, alginate-based particles proved to be promising strategies for producing food supplements containing mulberry leaf extracts for the management of hyperglycemic state.

A Novel Approach to Serving Plant-Based Confectionery-The Employment of Spray Drying in the Production of Carboxymethyl Cellulose-Based Delivery Systems Enriched with Teucrium montanum L. Extract

In this study, spray drying was used as a technological solution for the valorization of Teucrium montanum extract into carboxymethyl cellulose-based delivery systems (CMC), individually or in combination with collagen, guar gum, gum arabic, and kappa-carrageenan. The results showed that the process yield and morphological properties were positively influenced by the introduction of CMC binary blends. The employment of CMC resulted in a high encapsulation efficiency (77-96%) for all phenylethanoid glycosides (PGs) analyzed. Due to the low wettability of the microparticles, a relatively gradual in vitro release of the PGs was achieved. Infusion of the filling with hydrophilic T. montanum extract encapsulated in microparticles with high hydrophobic surface area proved to be a practical route for significant confectionery fortification (5-9 mg PGs per dw serving), ensuring prolonged interaction between the food matrix used and the extract under simulated gastrointestinal conditions. Based on sensory evaluation, the introduction of kudzu starch into the jelly matrix has shown a texture-modifying potential.

Application of low-, and medium-molecular weight chitosan for preparation of spray-dried microparticles loaded with Ferulago angulata essential oil: Physicochemical, antioxidant, antibacterial and in-vitro release properties

The present work aimed at spray-drying encapsulation of Chavir (Ferulago angulata) essential oil (EO) using low-, and medium-molecular weight chitosan. The obtained EO was observed to be mainly composed of β-ocimene, α-pinene, and bornyl acetate with antioxidant, and antimicrobial activity. The results indicated that stable emulsions with uniform particle size distribution and encapsulation efficiencies higher than 93 % could be prepared using chitosan as feed for spray-drying. In addition, spray-drying resulted in fabricating stable microspheres with yields higher than 50 %, uniform particle size, and encapsulation efficiency exceeding 70 %. The microspheres were fairly soluble and hygroscopic, and exhibited antioxidant and bacteriostatic activities with a biphasic release pattern. FTIR characterisation confirmed successful encapsulation of EO and thermal properties of microspheres indicated enhanced stability of EO after microencapsulation. Overall, it was revealed that molecular weight of chitosan and EO:chitosan ratio affects some physicochemical properties of obtained chitosan microspheres.

Microencapsulation by spray-drying and freeze-drying of extract of phenolic compounds obtained from ciriguela peel

Microcapsules of ciriguela peel extracts obtained by ultrasound-assisted extraction were prepared by spray drying, whose results were compared with those of freeze-drying as a control. The effects of spray-drying air temperature, feed flow rate and ratio of encapsulating agents (maltodextrin and arabic gum) were studied. Encapsulation efficiency, moisture content, total phenolic compounds (TPC), water activity, hygroscopicity, solubility, colorimetric parameters, phenolic profile by HPLC/DAD, simulated gastrointestinal digestion and morphology of spray-dried and freeze-dried microcapsules were evaluated, as well as their stability of TPC during 90 days storage at 7 and 25 °C. Spray-dried extract showed higher encapsulation efficiency (98.83%) and TPC (476.82 mg GAE g-1) than freeze-dried extract. The most abundant compounds in the liquid extract of ciriguela peel flour were rutin, epicatechin gallate, chlorogenic acid and quercetin. Rutin and myricetin were the major flavonoids in the spray-dried extract, while quercetin and kaempferol were in the freeze-dried one. The simulated gastrointestinal digestion test of microencapsulated extracts revealed the highest TPC contents after the gastric phase and the lowest one after the intestinal one. Rutin was the most abundant compound after the digestion of both spray-dried (68.74 µg g-1) and freeze-dried (93.98 µg g-1) extracts. Spray-dried microcapsules were of spherical shape, freeze-dried products of irregular structures. Spray-dried microcapsules had higher phenolic compounds contents after 90 days of storage at 7 °C compared to those stored at 25 °C, while the lyophilized ones showed no significant difference between the two storage temperatures. The ciriguela agro-industrial residue can be considered an interesting alternative source of phenolic compounds that could be used, in the form of bioactive compounds-rich powders, as an ingredient in pharmaceutical, cosmetic and food industries.

Inulin as prebiotic encapsulating agent for the production of spray-dried Hibiscus sabdariffa L. tea microcapsules

Due to the high content of phenolics and anthocyanins of Hibiscus sabdariffa L. tea and the sensibility of these bioactive compounds, this work aimed to optimize the obtention of microcapsules by spray-drying, using inulin as a carrier agent. Using a Box-Behnken Design, the effects of inlet temperature (130, 150, and 170 °C), feed flow rate (5, 10, and 15 mL min-1), and inulin concentration (5, 10, and 15 g L-1) were evaluated. It was possible to obtain pale-rose, slightly sweet instant powders with good total polyphenol content (1.12 mgGAE g-1) and anthocyanins encapsulation efficiency (32.3-60.6%), besides moisture (4.61-17.79%) and water activity (0.221-0.501), indicating physico-chemical and microbiological stability of the microcapsules. A simultaneous optimization with the desirability function was performed to maximize all the response variables analyzed, and the optimum conditions of 5 g L-1 of inulin, inlet temperature of 170 °C, and feed flow rate of 83 mL min-1 were found.

Encapsulation of Pineapple Peel Extracts by Ionotropic Gelation Using Corn Starch, Weissella confusa Exopolysaccharide, and Sodium Alginate as Wall Materials

Phenolic compounds that are present in pineapple by-products offer many health benefits to the consumer; however, they are unstable to many environmental factors. For this reason, encapsulation is ideal for preserving their beneficial effects. In this work, extracts were obtained by the combined method of solid-state fermentation with Rhizopus oryzae and ultrasound. After this process, the encapsulation process was performed by ionotropic gelation using corn starch, sodium alginate, and Weissella confusa exopolysaccharide as wall material. The encapsulates produced presented a moisture content between 7.10 and 10.45% (w.b), a solubility of 53.06 ± 0.54%, and a wettability of 31.46 ± 2.02 s. The total phenolic content (TPC), antioxidant capacity of DPPH, and ABTS of the encapsulates were also determined, finding 232.55 ± 2.07 mg GAE/g d.m for TPC, 45.64 ± 0.9 µm Trolox/mg GAE for DPPH, and 51.69 ± 1.08 µm Trolox/mg GAE for ABTS. Additionally, ultrahigh performance liquid chromatography (UHPLC) analysis allowed us to identify and quantify six bioactive compounds: rosmarinic acid, caffeic acid, p-coumaric acid, ferulic acid, gallic acid, and quercetin. According to the above, using ionotropic gelation, it was possible to obtain microencapsulates containing bioactive compounds from pineapple peel extracts, which may have applications in the development of functional foods.

Inulin-whey protein as efficient vehicle carrier system for chlorophyll: Optimization, characterization, and functional food application

Natural chlorophylls mostly found in vegetables such as spinach (Spinacia oleracea) could be employed as a possible substitute for synthetic colorants because of their intense green properties. However, the stability of natural chlorophyll is a major challenge to its utilization in the food industry. In this study, spray drying as an encapsulation technique was used to improve the stability of natural chlorophyll. Box-Behnken design was utilized to optimize the spray drying conditions for chlorophyll. Optimum conditions were given as inlet temperature, 132°C; inulin-to-whey protein isolate ratio, 61%:39%; pump rate, 25%, resulting in 92.3% encapsulation efficiency, 69.4% solubility, and -13.5 mV zeta potential at a desirability level of 0.901. The particle size, Carr index, bulk and tapped density, polydispersity index, and color showed satisfactory results. Crystallinity, endothermic peak melting temperature, and the enthalpy of chlorophyll-loaded microcapsules increased when compared to the blank microcapsules suggesting decreased hygroscopicity and enhanced thermal stability. In addition, the suitability of fabricated microcapsules using yogurt as a food model was assessed. Yogurt incorporated with chlorophyll-loaded microcapsules showed no significant pH modification with better apparent viscosity than control and sodium copper chlorophyllin (SCC) yogurt after 9 days of refrigerated storage. Based on the studied responses, the spray drying process could be optimized to achieve optimal output and product quality. PRACTICAL APPLICATION: Spray drying is a cheap and convenient approach for microencapsulating bioactive compounds such as chlorophyll. However, the physico-chemical and functional properties of the spray-dried microcapsules are influenced by operating conditions, such as inlet temperature, type and concentration of wall materials, and feed flow rate. Therefore, to maximize and obtain a superior quality of the final product, there is a need to optimize the spray drying process. The Box-Behnken design employed in this study could be utilized as an appropriate technique to design, enhance, and develop process parameters for the fabrication and better retention of the physico-chemical properties of spray-dried chlorophyll microcapsules.

Plant extracts and essential oils in the dairy industry: A review

Plants have been used as food additives worldwide to enhance the sensory qualities of foods and extend their shelf life by reducing or eliminating foodborne pathogens. They also serve as therapeutic agents due to their beneficial effects on human health through their anti-cancerous, anti-inflammatory, antioxidant, and immune-modulatory properties. Plants can be added to food as a dry powder, grated material, paste, juice, or as an extract that can be produced by a variety of methods. Plant extracts and essential oils are concentrated sources of bioactive phytochemicals that can be added to food in small amounts in a variety of forms. These forms include liquid, semi-solid, or dry powder for easy and uniform diffusion. Encapsulation can protect bioactive compounds from temperature, moisture, oxidation, and light, as well as allow for controlling the release of the encapsulated ingredients. Nanoemulsions can enhance the bioactivity of active components. This review explains how plant extracts and essential oils are used in the dairy industry as antimicrobial materials, analyzing their impact on starter bacteria; as natural antioxidants to prevent the development of off-flavors and increase shelf life; and as technological auxiliaries, like milk-clotting enzymes, stabilizers, and flavoring agents. Therefore, plant extracts and essential oils are a better choice for the dairy industry than plants or their parts due to a wide range of applications, homogeneous dispersion, and ability to control the concentration of the bioactive ingredients and enhance their efficiency.

Wall Materials for Encapsulating Bioactive Compounds via Spray-Drying: A Review

Spray-drying is a continuous encapsulation method that effectively preserves, stabilizes, and retards the degradation of bioactive compounds by encapsulating them within a wall material. The resulting capsules exhibit diverse characteristics influenced by factors such as operating conditions (e.g., air temperature and feed rate) and the interactions between the bioactive compounds and the wall material. This review aims to compile recent research (within the past 5 years) on spray-drying for bioactive compound encapsulation, emphasizing the significance of wall materials in spray-drying and their impact on encapsulation yield, efficiency, and capsule morphology.

Influence of Encapsulation Parameters on the Retention of Polyphenols in Blackthorn Flower Extract

In order to utilize the benefits of blackthorn flower polyphenols and provide their stabilization during processing and storage, and to facilitate their application in functional food products, this study aimed to evaluate the encapsulation parameters during the spray-drying process of blackthorn flower extract. The effect of the type of wall material (maltodextrin (MD) and its mixtures with gum arabic (GA) and inulin (IN)), its ratio to extract dry matter (0.5, 1, and 2) and drying temperature (120, 150, and 180 °C) on the concentration of different polyphenolic groups was studied. While the lowest applied amount of wall material at the lowest drying temperature enabled efficient encapsulation of all polyphenolic groups, the type of wall material applied caused significant differences in retention. The highest concentrations of both phenolic acids and flavonoids were achieved with the addition of 25% of GA in MD. Unlike the addition of GA, mixtures of MD with IN did not show a positive effect on the retention of polyphenols. Selected encapsulation parameters ensured the high retention of total phenolics, namely 87.87% of the content determined in the liquid extract prior to spray drying, thereby providing a polyphenol-rich product with great potential for application in functional food and the nutraceutical industry.

Oxidative stability and sensory evaluation of sodium caseinate-based yak butter powder

Yak butter's high unsaturated fatty acid level predisposes it to oxidation, hence must be converted into more stable forms like powder. This study aimed to spray dry yak butter using 10% yak butter and four sodium caseinate (NaCas) formulations: sample A: 100% NaCas; sample B: 50% NaCas, 50% lactose; sample C: 75% NaCas, 25% lactose; and sample D: 25% NaCas, 75% maltodextrin. The powders were vacuum and hermetically sealed, and evaluated for oxidative stability, physical and sensory properties during storage at 65 ℃ for 30 days. The results showed that samples B and D had similar and most favorable physical properties (such as, moisture, water activity, particle size, bulk density re-dispersion time, and encapsulation efficiency); though sample B, together with sample C, browned the most during storage. The majority of the sensory panelists preferred samples B and D; observed high caking in samples C and B; and the least whiteness loss and caking in samples D and A but high off-flavors in samples A and C. After storage, peroxide and thiobarbituric acid values of powder samples ranged from 34.98 to 69.54 meqO2/kg and 1.85-9.43 mg MD/kg, respectively, in the decreasing order of A, C, B, and D. Sample D, followed by B, showed the highest radical scavenging activity. Therefore, for optimum yak butter powder physical properties and oxidative stability, 50%:50%, NaCas: lactose, and 25%:75%, NaCas: maltodextrin formulations should be used. This study provides essential knowledge for butter powder processors.

Bioprocessing of pineapple waste biomass for sustainable production of bioactive compounds with high antioxidant activity

The effect of temperature, moisture content and pH during solid-state fermentation (SSF) of MD2 pineapple peel with Rhizopus oryzae (MUCL 28168) was evaluated on the release of bioactive compounds with antioxidant capacity. Applying a central composite design, it was found that temperature had a significant effect (p < 0.05) on the total phenolic content and DPPH antioxidant activity while for the ABTS radical elimination activity, the factor that presented a significant effect was the pH (p < 0.05); as this factor increases, the antioxidant activity enhances. The optimal conditions for fermentation process were 80% of moisture content, pH 5.5, temperature 37.3 °C and 24 h of process to maximize phenolic content and antioxidant activity. Gallic acid, chlorogenic acid, caffeic acid and cinnamic acid were identified in the extracts by HPLC analysis. These results permit to conclude that SSF of pineapple peel is an effective bioprocess for the release of phenolic compounds with antioxidant activity.

Graphical abstract

Effect of Microencapsulation Techniques on the Stress Resistance and Biological Activity of Bovine Lactoferricin-Lactoferrampin-Encoding Lactobacillus reuteri

Bovine lactoferricin-lactoferrampin-encoding Lactobacillus reuteri (LR-LFCA) has been found to benefit its host by strengthening its intestinal barrier. However, several questions remain open concerning genetically engineered strains maintaining long-term biological activity at room temperature. In addition, probiotics are vulnerable to harsh conditions in the gut, such as acidity and alkalinity, and bile salts. Microencapsulation is a technique to entrap probiotic bacteria into gastro-resistant polymers to carry them directly to the intestine. We selected nine kinds of wall material combinations to encapsulate LR-LFCA by spray drying microencapsulation. The storage stability, microstructural morphology, biological activity, and simulated digestion in vivo or in vitro of the microencapsulated LR-LFCA were further evaluated. The results showed that LR-LFCA had the highest survival rate when microcapsules were prepared using a wall material mixture (skim milk, sodium glutamate, polyvinylpyrrolidone, maltodextrin, and gelatin). Microencapsulated LR-LFCA increased the stress resistance capacity and colonization abilities. In the present study, we have identified a suitable wall material formulation for spray-dried microencapsulation of genetically engineered probiotic products, which would facilitate their storage and transport.

Encapsulation of Rich-Carotenoids Extract from Guaraná (Paullinia cupana) Byproduct by a Combination of Spray Drying and Spray Chilling

Guaraná byproducts are rich in carotenoids, featuring strong antioxidant capacity and health-promoting benefits. However, these compounds are highly susceptible to oxidation and isomerization, which limits their applications in foods. This research aimed to encapsulate the carotenoid-rich extract from reddish guaraná peels by spray drying (SD), chilling (SC), and their combination (SDC) using gum arabic and vegetable fat as carriers. The carotenoid-rich extract was analyzed as a control, and the formulations were prepared with the following core–carrier ratios: SD20 (20:80), SD25 (25:75), SD33 (33:67), SC20 (20:80), SC30 (30:70), SC40 (40:60), SDC10 (10:90), and SDC20 (20:80). The physicochemical properties of the formed microparticles were characterized, and their storage stability was evaluated over 90 days. Water activity of microparticles formed during the SD process increased during storage, whereas those formed by SC and SDC processes showed no changes in water activity. The formed microparticles exhibited color variation and size increase over time. Carotenoid degradation of the microparticles was described by zero-order kinetics for most treatments. Considering the higher carotenoid content and its stability, the optimum formulation for each process was selected to further analysis. Scanning electron micrographs revealed the spherical shape and absence of cracks on the microparticle surface, as well as size heterogeneity. SD increased the stability to oxidation of the carotenoid-rich extract by at least 52-fold, SC by threefold, and SDC by 545-fold. Analysis of the thermophysical properties suggested that the carrier and the process of encapsulation influence the powder’s thermal resistance. Water sorption data of the SDC microparticles depended on the blend of the carrier agents used in the process. Carotenoid encapsulation via an innovative combination of spray drying and spray chilling processes offers technological benefits, which could be applied as a promising alternative to protect valuable bioactive compounds.

Influence of Ultrasound Application in Fermented Pineapple Peel on Total Phenolic Content and Antioxidant Activity

Antioxidant phenolic compounds were extracted from fermented samples of Golden pineapple peels via an ultrasound method. The fermentation conditions to maximize the production of phenolic content and antioxidant activity were previously determined (pH: 5.5, T: 37.3 °C and 85% moisture content). A central composite design with 20 treatments was applied to evaluate the effect of the ethanol concentration, time, and temperature on the production of phenolic compounds and antioxidant activity of the extracts. The statistical analysis showed that the optimal conditions to produce extracts with high phenolic content and antioxidant activity were: 62 °C, 30 min and 58% ethanol. We obtained 866.26 mg gallic acid equivalents (GAE)/g d.m in total phenolic content and for antioxidant activity expressed as percentage inhibition, 80.06 ± 1.02% for ABTS and 63.53 ± 2.02% for DPPH, respectively. The bioactive compound profile in the extracts was identified and quantified using ultra-high performance liquid chromatography (UHPLC), this method showed the presence of rosmarinic acid, caffeic acid, vanillic acid, p-coumaric acid, ferulic acid, quercetin-3 glucoside, rutine, quercetin, kaempherol-3 glucoside and gallic acid, demonstrating the great potential of these by-products to obtain components that can benefit the consumer’s health.

Recent Advances in Water-Soluble Vitamins Delivery Systems Prepared by Mechanical Processes (Electrospinning and Spray-Drying Techniques) for Food and Nutraceuticals Applications-A Review

Water-soluble vitamins are essential micronutrients in diets and crucial to biochemical functions in human body physiology. These vitamins are essential for healthy diets and have a preventive role against diseases. However, their limitations associated with high sensitivity against external conditions (temperature, light, pH, moisture, oxygen) can lead to degradation during processing and storage. In this context, microencapsulation may overcome these conditions, protecting a biomolecule’s bioavailability, stability, and effectiveness of delivery. This technique has been used to produce delivery systems based on polymeric agents that surround the active compounds. The present review focuses on the most relevant topics of water-soluble vitamin encapsulation using promising methods to produce delivery vehicles—electrohydrodynamic (electrospinning and electrospraying) and spray-drying techniques. An overview of the suitable structures produced by these processes is provided. The review introduces the general principles of the methods, advantages, disadvantages, and involved parameters. A brief list of the used physicochemical techniques for the systems’ characterization is discussed in this review. Electrospinning and spray-drying techniques are the focus of this investigation in order to guarantee vitamins’ bioaccessibility and bioavailability. Recent studies and the main encapsulating agents used for these micronutrients in both processes applied to functional food and nutraceutical areas are highlighted in this review.

Supercritical Technology-Based Date Sugar Powder Production: Process Modeling and Simulation

Date palm fruits (Phoenix dactylifera) contain high levels of fructose and glucose sugars. These natural sugar forms are healthy, nutritional and easily assimilate into human metabolism. The successful production of soluble date sugar powder from nutritious date fruits would result in a new food product that could replace the commercial refined sugar. In this work, a novel process technology based on the supercritical extraction of sugar components from date pulp was modeled and simulated using Aspen Plus software. The process model consisted of three main steps that were individually simulated for their optimal working conditions as follows: (a) freeze-drying of the date pulp at −42 °C and 0.0001 bar; (b) supercritical extraction of the sugar components using a 6.77 wt.% water mixed CO2 solvent system at a pressure of 308 bar, temperature of 65 °C, and CO2 flow rate of 31,000 kg/h; and (c) spray-drying of the extract using 40 wt.% Gum Arabic as the carrier agent and air as drying medium at 150 °C. The overall production yield of the process showed an extraction efficiency of 99.1% for the recovery of total reducing sugars from the date fruit. The solubility of the as-produced date sugar powder was improved by the process selectivity, elimination of insoluble fiber contents, and the addition of Gum Arabic. The solubility of the final date sugar product was estimated as 0.89 g/g water.

Innovative Delivery Systems Loaded with Plant Bioactive Ingredients: Formulation Approaches and Applications

Plants constitute a rich source of diverse classes of valuable phytochemicals (e.g., phenolic acids, flavonoids, carotenoids, alkaloids) with proven biological activity (e.g., antioxidant, anti-inflammatory, antimicrobial, etc.). However, factors such as low stability, poor solubility and bioavailability limit their food, cosmetics and pharmaceutical applications. In this regard, a wide range of delivery systems have been developed to increase the stability of plant-derived bioactive compounds upon processing, storage or under gastrointestinal digestion conditions, to enhance their solubility, to mask undesirable flavors as well as to efficiently deliver them to the target tissues where they can exert their biological activity and promote human health. In the present review, the latest advances regarding the design of innovative delivery systems for pure plant bioactive compounds, extracts or essential oils, in order to overcome the above-mentioned challenges, are presented. Moreover, a broad spectrum of applications along with future trends are critically discussed.

Optimization of Natural Antioxidants Extraction from Pineapple Peel and Their Stabilization by Spray Drying

Pineapple peel still contains an important amount of phenolic compounds and vitamins with valuable antioxidant activity. In this way, the aim of this study was the recovery of the bioactive compounds from pineapple peel using environmentally friendly and low-cost techniques, envisaging their application in food products. From the solid-liquid extraction conditions tested, the one delivering an extract with higher total phenolic content and antioxidant capacity was a single extraction step with a solvent-pineapple peel ratio of 1:1 (w/w) for 25 min at ambient temperature, using ethanol-water (80-20%) as a solvent. The resulting extract revealed a total phenolic content value of 11.10 ± 0.01 mg gallic acid equivalent (GAE)/g dry extract, antioxidant activity of 91.79 ± 1.98 µmol Trolox/g dry extract by the DPPH method, and 174.50 ± 9.98 µmol Trolox/g dry extract by the FRAP method. The antioxidant rich extract was subjected to stabilization by the spray drying process at 150 °C of inlet air temperature using maltodextrin (5% w/w) as an encapsulating agent. The results showed that the antioxidant capacity of the encapsulated compounds was maintained after encapsulation. The loaded microparticles obtained, which consist of a bioactive powder, present a great potential to be incorporated in food products or to produce bioactive packaging systems.

Application of Edible Alginate Films with Pineapple Peel Active Compounds on Beef Meat Preservation

Alginate-based edible films containing natural antioxidants from pineapple peel were applied in the microbial spoilage control, color preservation, and barrier to lipid oxidation of beef steaks under storage at 4 °C for five days. Different stabilization methods of pineapple peel compounds were used before incorporation into alginate films, including extracted compounds with an hydroalcoholic solvent encapsulated in microparticles, microparticles produced by spray-drying pineapple peel juice, and particles obtained by milling freeze dried pineapple peel. Bioactive films exhibited higher antioxidant activity (between 0.15 µmol to 0.35 µmol FeSO4.7H2O/g dried film) than the alginate film without these compounds (0.02 µmol FeSO4.7H2O/g dried film). Results showed that control films without active compounds had no significant effect on decreasing the microbial load of aerobic mesophilic and Pseudomonas spp., while the films containing encapsulated hydroalcoholic extract showed a significant inhibitory effect on microbial growth of meat at two days of storage. Alginate films containing peel encapsulated extract were effective for maintaining the color hue and intensity of red beef meat samples. Pineapple peel antioxidants have the potential to retard lipid oxidation in meat samples, and the possibility of incorporation of a higher amount of pineapple peel bioactive compounds in the films should be investigated.