The Freeze-Drying of Foods-The Characteristic of the Process Course and the Effect of Its Parameters on the Physical Properties of Food Materials

Traditional weaning foods and processing methods with fortification for sustainable development of infants to combat zero hunger: a review

Weaning foods are soft digestible baby foods introduced along with breast milk for infants of 6 to 24 months. Early nutrition is a crucial one for proper growth and wellbeing. Researchers have developed weaning food from locally available ingredients with appropriate processing methods without losing actual nutrients value. Despite this, micronutrient malnutrition irrespective of the country status is a potential threat. This is overcome by fortifying micronutrients in the formulated weaning foods. Typically, formulated weaning foods are prepared from fruits and cereal grains that are abundant in micronutrients. Different processing methods are adopted to maintain the original natural characteristics of the ingredients. Traditional homemade weaning foods always have an upper hand over industrialized ones. Additionally, fortification enhances the micronutrients in weaning food and helps in uprooting the hidden hunger thereby helping in the sustainable development goals. This review focuses and delivers insights on the various processing methods and cereal-fruit weaning foods as traditional homemade ready-to-serve food supplement. It also highlights the impact of fortification of weaning foods against micronutrient malnutrition. On the whole this work emphasizes on the importance of sustainable weaning foods and how babies can be brought up into healthy grown-ups achieving zero hunger.

The impacts of freeze-drying-induced stresses on the quality of meat and aquatic products: Mechanisms and potential solutions to acquire high-quality products

Freeze-drying is a preservation method known for its effectiveness in dehydrating food products while minimizing their deterioration. However, protein denaturation and oxidation during freezing and drying can degrade the quality of meat and aquatic products. Therefore, finding the strategies to ensure the dried products' sensory, functional, and nutritional attributes is crucial. This study aimed to summarize protein denaturation mechanisms and overall quality changes in meat and aquatic products during freezing and drying, while also exploring methods for quality control. Different freeze-drying conditions result in varying levels of oxidation and functionality in meat and aquatic products, leading to changes in quality, such as altered fatty and amino acid compositions, protein digestibility, and sensory attributes. To obtain high-quality dried products by freeze-drying, several parameters should be considered, including sample type, freezing and drying temperatures, moisture content, pulverization effects, and storage conditions.

Metabolomics insights of conventional and organic tempe during in vitro digestion and their antioxidant properties and cytotoxicity in HCT-116 cells

Tempe, a fermented soybean food rich in polyphenols including isoflavones, is valued for its health benefits, notably its antioxidants. Concerns about glyphosate residues in crops have led to increased demand for organic soy products, including tempe. The study aimed to investigate the metabolomic profiles of tempe and its bioactive potentials prior to and following in vitro simulated gastrointestinal digestion. Conventional soybean (CS), conventional tempe (CT), conventional tempe digesta (CTD), organic soybean (OS), organic tempe (OT) and organic tempe digesta (OTD) were analysed for various assays. The study observed a significant decrease in the total phenolic and flavonoid levels for conventional and organic samples in tempe extracts (CT, OT) compared to tempe digesta (CTD, OTD). Organic tempe digesta has a higher total phenolic content (CTD = 22.55 µg GAE/g, OTD = 41.36 µg GAE/g) and flavonoid content (CTD = 4.64 µg QE/g, OTD = 10.06 µg QE/g) compared to conventional tempe digesta. However, there is a significant difference in the bioaccessibility of phenolic (CT = 74.77 %, OT = 59.20 %) and flavonoid (CT = 49.4 %, OT = 57.52 %) in both organic and conventional tempe. Tempe consistently surpasses soybean in antioxidant assays such as DPPH, ABTS, and FRAP. Organic tempe digesta exhibits the most elevated levels of antioxidants. Using GNPS and the SIRIUS database, 34 metabolites were annotated according to the criteria of having a VIP score > 1.5, a log2(FC) > 1, and a p-value < 0.05. From the list, 26 metabolites demonstrated a positive correlation with antioxidant activity, DPPH, and FRAP. Molecular networking enables the visualization of 12 prominent isoflavones, namely daidzein, daidzin, genistein, genistin, glycitein, glycitin, 6″-O-malonyldaidzin, 6″-O-acetylgenistin, 6″-O-acetyldaidzin, and 7,8,4'-trihydroxyisoflavone. Interestingly, aglycone isoflavones are abundant in organic tempe digesta while glycoside isoflavones are abundant in organic and conventional soybeans. Overall, the findings indicate that tempe digesta exhibits distinct metabolic patterns and bioactive potentials.

Changes in flavor profile of vegetable seasonings by innovative drying technologies: A review

Seasonings like garlic, ginger, and scallion provide spicy and masking flavor or aroma in vegetables. However, the method or technique used for drying these spices can affect the flavor profile. Therefore, this review focuses on vegetable seasonings like ginger, garlic, and scallion, the characteristic flavor of fresh and dehydrated vegetable seasoning, and how drying methods (freeze-drying [FD], convective hot air drying [HAD], infrared drying, microwave drying [MW]), and other recent dryers (swirling fluidized bed [SFB], pulsed-vacuum dryer, relative humidity-convective dryer, etc.) affect the flavor profile of the common vegetable seasonings. HAD increases α-zingiberene, reduces gingerol, and forms β-citral and citral in fresh ginger. FD increased sesquiterpenes, retained terpenoids, sulfides, and other volatiles in fresh ginger, and did not produce new volatile compounds (VOCs) in garlic. SFB drying better preserves 6-gingerol than FD and HAD. MW increases trisulfides and cyclic sulfur compounds in garlic. In general, drying, especially thermal drying reduces the VOCs in fresh garlic, ginger, and scallion and causes the formation of new VOCs.

Synergistic effect of drying methods and ultrasonication on natural deep eutectic solvent extraction of phytochemicals from African spinach (Amaranthus hybridus) stem

The study evaluated the combined effects of drying methods (air drying [AD], hot AD [HAD], microwave drying [MD], and freeze-drying [FD]) and ultrasonication parameters (sonication temperature [STemp]: 40, 50, and 60°C) and heating time (STime: 60 and 120 min) on natural deep eutectic solvent (NADES) extraction of phytochemicals from Amaranthus hybridus stem. Increasing the STemp increased the extraction yield (ECY) of the phytochemicals for all drying methods but increase in the heating time reduced the ECY slightly. MD combined with 60°C ST showed the highest ECY (53%), whereas HAD combined with 40°C ST had the lowest ECY (18%). At 60 min heating time, increasing the ST from 40 to 50°C increased the total phenolic content (TPC) in the extract for most drying methods except MD, and a sonication time of 120 min showed a slightly higher TPC, especially for MD samples. At 60 min sonication, total flavonoid content (TFC, 800 mgQE/g) was highest for AD plus 50°C ST and lowest for AD combined with 60°C (100 mgQE/g), whereas for 120 min sonication, MD and AD with 50°C showed the highest TFC (690 mgQE/g). FD retained better some of the vitamins (thiamine, riboflavin, niacin) but MD retained better vitamin C. The antioxidant capacity was not so much different among the drying methods except for FD, which showed lower values. These results provide a theoretical basis for the synergistic applications of drying and ultrasonication during NADES extraction of phytochemicals from Amaranthus hybridus.

Drying of Red Chili Pepper (Capsicum annuum L.): Process Kinetics, Color Changes, Carotenoid Content and Phenolic Profile

Studies were conducted focusing on the drying of chili pepper fruits (Capsicum annuum L.), cultivar Cyklon, using convective (AD), convective-microwave (AMD), vacuum (VD), and freeze-drying (FD) methods. The influence of the drying method and temperature on the kinetics of the process and selected quality attributes of the dried product were evaluated. It was demonstrated that the Midilli model best described the drying kinetics for all methods across the entire measurement range. FD and VD produced dried products with the highest brightness and the greatest value of the a* color parameter. The lowest b* color parameter was observed for the product dried using FD at 40 °C, while the highest b* value was noted for samples dried using AMD (100 W) at 60 °C. The highest carotenoid retention was achieved with the FD method at 40 °C, while the lowest carotenoid content was found in the product obtained using the AMD method (100 W) at 60 °C. The smallest losses of capsaicinoids were observed after FD drying at 40 °C, while the largest were found for AMD (100 W) at 60 °C. The analysis of chili pepper fruit extracts revealed the quantitative composition of 12 main phenolic compounds using the UHPLC-UV method. The highest polyphenol content was obtained with FD, while the lowest total polyphenol content was recorded after AD. Regardless of temperature, the total flavonoid content was highest in extracts from FD products, and the lowest flavonoid content was found after AMD at 100 W. For all drying methods analyzed, the total flavonoid content in the pepper extracts decreased with increasing temperature.

Exploration of the impact of different drying methods on the quality of Gastrodia elata: A study based on drying kinetics and multidimensional quality evaluation

In this study, the drying kinetics and multidimensional quality of Gastrodia elata (GE) obtained through five different drying methods were analyzed. The Page model provided the best fit. Though widely used, hot-air drying (HA-D) showed mediocre performance. Due to strong heat penetration, microwave drying (MV-D) and infrared drying (IR-D) effectively reduced drying time and energy consumption. However, they experienced Maillard and caramelization reactions, resulting in notable cell structure shrinkage, severe browning, pronounced caramel taste, and poor retention of active ingredients. Conversely, freeze-drying (F-D) and vacuum drying (V-D), due to the involvement of low-temperature or vacuum environments, demonstrated optimal performance in preserving microstructure, antioxidant activity, active ingredients, and flavor. However, F-D was time-consuming (1320 min) and had an energy consumption of 2.69 times that of HA-D, limiting its large-scale application. V-D struck the best balance between energy consumption and product quality, making it a highly promising drying method for GE.

Multitarget Phytocomplex: Focus on Antibacterial Profiles of Grape Pomace and Sambucus ebulus L. Lyophilisates Against Extensively Drug-Resistant (XDR) Bacteria and In Vitro Antioxidative Power

Objectives: This study was conceived with the aim of translating the experience and knowledge of the research group into the design and creation of multi-active phytocomplex cocktails from lyophilised winery by-products (Grape Pomace-GP) and weeds (Sambucus ebulus L., Dwarf Elder-DE). Methods: Quantification of bioactive molecules was performed by high-performance liquid chromatography (HPLC) method. Results: In the extract obtained from lyophilised GP, the most dominant component that was quantified was petunidin-3-glucoside. Prominent compounds that were quantified in DE extract were cyanidin derivatives. The total number of microorganisms in lyophilisates is low, but some of them still survive lyophilisation. Antibacterial activity was determined by microdilution, the minimum inhibitory concentration (MIC) of the tested bacteria ranged from 0.78 mg/mL to 25.00 mg/mL. Antibacterial susceptibility testing (AST) revealed that Klebsiella spp. and Acinetobacter baumannii complex are extensively drug-resistant (XDR). Conclusions: The GP + DE cocktail showed very strong AB power against both tested XDR bacteria. The total phenolic content and antioxidative effect (determined spectrophotometrically) indicate their linear correlation.

Lyophilization as an alternative for conservation of equine plasma as a source of immunoglobulin G for neonatal foals

Providing plasma with immunoglobulins is essential for the health of foals with failure of passive transfer of immunity. The use of lyophilized plasma (LP) offers a simple and affordable option in terms of transportation and storage. This study aimed to measure the concentrations of immunoglobulin G (IgG), total protein (TP), and total solids (TS) in fresh equine plasma before and after lyophilization. Plasma was collected from six healthy male horses. The samples underwent freeze-drying and were reconstituted in deionized water to their original volume. The concentrations of IgG in both fresh and reconstituted LP were determined by simple radial immunodiffusion and TS and TP concentrations measured using refractometry. Results indicated that the IgG concentration in fresh plasma (8.9 ± 3.2 g/L) was not different from LP (7.1 ± 2.2 g/L; P > 0.05). The TP concentration in fresh plasma was 6.6 ± 0.5 g/dL, which decreased to 5.7 ± 0.2 g/dL after lyophilization (P < 0.05). The TS of fresh plasma were 7.5 ± 0.8 %, and also lower in LP 6.3 ± 0.5 % (P < 0.05). The findings revealed that the lyophilization process preserves IgG concentration with small losses in TS and TP upon reconstitution. The research supports the potential of lyophilized equine plasma as a promising treatment option, with future efforts focused on optimizing the product, validating its efficacy and stability through clinical trials, and developing practical packaging solutions for use in the equine industry.

Effect of microwave vacuum drying time on the quality profiles, microstructures and in vitro digestibility of pork chip snacks

In present study, the quality profiles, microstructures and in vitro digestibility of pork chip snacks (PCS) prepared by microwave vacuum drying (MVD) under different drying times (20, 21, 22, 23, and 24 min) were investigated. The results revealed significant decreases in the moisture content and L*-value of PCS, while the protein/ash contents, a*-value, and b*-value of PCS markedly increased with prolonged MVD time (P < 0.05). Additionally, as MVD time extended from 20 to 24 min, the textural characteristics of PCS, particularly brittleness and crunchiness, initially increased and then gradually decreased (P < 0.05). Scanning electron microscopy (SEM) images showed that a moderate MVD time (22 min) resulted in the formation of larger pores in PCS, enhancing brittleness and crunchiness. However, excessive MVD time (24 min) led to the melting of these pores, subsequently reducing the brittleness and crunchiness of PCS. Furthermore, in vitro protein digestibility of PCS gradually decreased with increasing MVD time, primarily attributed to increased protein aggregation, as indicated by changes in sulfhydryl contents. In summary, our findings highlight that PCS subjected to 22 min of MVD exhibited the highest overall acceptability. This study provides a novel strategy for the application of MVD in the processing of meat snacks.

Encapsulation of Saccharomyces spp. for Use as Probiotic in Food and Feed: Systematic Review and Meta-analysis

Probiotics, particularly yeasts from the genus Saccharomyces, are valuable for their health benefits and potential as antibiotic alternatives. To be effective, these microorganisms must withstand harsh environmental conditions, necessitating advanced protective technologies such as encapsulation to maintain probiotic viability during processing, storage, and passage through the digestive system. This review and meta-analysis aims to describe and compare methods and agents used for encapsulating Saccharomyces spp., examining operating conditions, yeast origins, and species. It provides an overview of the literature on the health benefits of nutritional yeast consumption. A bibliographic survey was conducted following the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines. The meta-analysis compared encapsulation methods regarding their viability after encapsulation and exposure to the gastrointestinal tract. Nineteen studies were selected after applying inclusion/exclusion criteria. Freeze drying was found to be the most efficient for cell survival, while ionic gelation was best for maintaining viability after exposure to the gastrointestinal tract. Consequently, the combination of freeze drying and ionic gelation proved most effective in maintaining high cell viability during encapsulation, storage, and consumption. Research on probiotics for human food and animal feed indicates that combining freeze drying and ionic gelation effectively protects Saccharomyces spp.; however, industrial scalability must be considered. Reports on yeast encapsulation using agro-industrial residues as encapsulants offer promising strategies for preserving potential probiotic yeasts, contributing to the environmental sustainability of industrial processes.

Influence of Liquid Nitrogen Pre-Freezing and Drying Methods on the Collagen Content, Physical Properties, and Flavor of Fish Swim Bladder

Fish swim bladder (FSB) is a type of traditional nutraceutical, but the lack of high-quality drying methods limits its premium market development. In order to obtain optimal-quality dried FSBs from Chinese longsnout catfish, the effects of liquid nitrogen pre-freezing (LNF) and drying on the physical properties and flavor of FSB were evaluated. Four methods were used for FSB drying, including natural air-drying (ND), hot-air-drying (HD), LNF combined with freeze-drying (LN-FD), and LNF combined with HD (LN-HD). Color, collagen content, rehydration ratio, textural properties, and flavor characteristics (by GC-IMS, E-nose, and E-tongue) were measured to clarify the differences among four dried FSBs. The results showed that ND cannot effectively remove moisture from FSB as the final product showed a stronger sourness in taste. HD led to a decrease in the collagen content and the collapse of the fiber structure in FSB. Compared to HD, LN-HD showed a higher collagen content (0.56 g/g) and a different flavor fingerprint. FSB treated by LN-FD had better physical qualities in terms of an attractive color, a high collagen content (0.79 g/g), low shrinkage, a higher rehydration ratio (2.85), and a soft texture, while also possessing richer characteristic flavors. The application of LN-FD may help the optimization of the nutrition level, rehydration ability, mouthfeel, and flavor of dried FSB.

Effects of High-Speed Shearing Treatment on the Physical Properties of Carbohydrate-Binder Mixture during Gelatinization for Preparing Freeze-Dried Soup Products

Modernization has led to a large convenience food market, and the demand for freeze-dried (FD) soup products is increasing in the Republic of Korea. FD soup products are easy to eat without cooking and can be stored for long periods. However, it is often difficult to ensure sensory satisfaction after rehydration of FD soup products; in particular, the ingredients are not evenly dispersed. Therefore, a stable dispersion or reconstitution of the FD soup products is required after rehydration. Here, the effects of high-speed shearing homogenization on the physical properties of a carbohydrate-binder mixture comprising maltodextrin, potato starch, and rice flour were investigated during hydrothermal gelatinization. To find a suitable treatment condition, different homogenization eras, speeds, and concentrations of the binder mixture were considered; in particular, the homogenization eras were set by considering the hydrothermal property of the binder mixture profiled using differential scanning calorimetry. The viscosity of the binder mixture and the compression strength and microstructure of the FD binder block, including the dispersion stability after rehydration, were evaluated. The quality of the FD binder block was improved by homogenization above 5000 rpm when the core temperature of the binder mixture reached approximately To at 14.5-21.8% concentrations. The improved FD binder block exhibited a fine surface and tiny porous microstructure compared with the control (with continuous agitation at 250 rpm). The control block was divided into two phases, whereas the improved block maintained the initial dispersion stability at 50 °C for 1 h. These results are expected to be referenced for the purpose of improving the quality of the FD soup products.

Supercritical Technology as an Efficient Alternative to Cold Pressing for Avocado Oil: A Comparative Approach

Avocado oil is rich in nutrients beneficial to human health, such as monounsaturated fatty acids, phenolic compounds, tocopherol, and carotenoids, with numerous possibilities for application in industry. This review explores, through a comparative approach, the effectiveness of the supercritical oil extraction process as an alternative to the conventional cold-pressing method, evaluating the differences in the extraction process steps through the effect of temperature and operating pressure on bioactive quality and oil yield. The results reveal that supercritical avocado oil has a yield like that of mechanical cold pressing and superior functional and bioactive quality, especially in relation to α-tocopherol and carotenoids. For better use and efficiency of the supercritical technology, the maturation stage, moisture content, fruit variety, and collection period stand out as essential factors to be observed during pre-treatment, as they directly impact oil yield and nutrient concentration. In addition, the use of supercritical technology enables the full use of the fruit, significantly reducing waste, and adds value to the agro-industrial residues of the process. It produces an edible oil free of impurities, microorganisms, and organic solvents. It is a green, environmentally friendly technology with long-term environmental and economic advantages and an interesting alternative in the avocado market.

Upcycling fruit waste into microalgae biotechnology: Perspective views and way forward

Fruit and vegetable wastes are linked to the depletion of natural resources and can pose serious health and environmental risks (e.g. eutrophication, water and soil pollution, and GHG emissions) if improperly managed. Current waste management practices often fail to recover high-value compounds from fruit wastes. Among emerging valorization methods, the utilization of fruit wastes as a feedstock for microalgal biorefineries is a promising approach for achieving net zero waste and sustainable development goals. This is due to the ability of microalgae to efficiently sequester carbon dioxide through photosynthesis, utilize nutrients in wastewater, grow in facilities located on non-arable land, and produce several commercially valuable compounds with applications in food, biofuels, bioplastics, cosmetics, nutraceuticals, pharmaceutics, and various other industries. However, the application of microalgal biotechnology towards upcycling fruit wastes has yet to be implemented on the industrial scale due to several economic, technical, operational, and regulatory challenges. Here, we identify sources of fruit waste along the food supply chain, evaluate current and emerging fruit waste management practices, describe value-added compounds in fruit wastes, and review current methods of microalgal cultivation using fruit wastes as a fermentation medium. We also propose some novel strategies for the practical implementation of industrial microalgal biorefineries for upcycling fruit waste in the future.

Three-dimensional genome architecture persists in a 52,000-year-old woolly mammoth skin sample

Analyses of ancient DNA typically involve sequencing the surviving short oligonucleotides and aligning to genome assemblies from related, modern species. Here, we report that skin from a female woolly mammoth (†Mammuthus primigenius) that died 52,000 years ago retained its ancient genome architecture. We use PaleoHi-C to map chromatin contacts and assemble its genome, yielding 28 chromosome-length scaffolds. Chromosome territories, compartments, loops, Barr bodies, and inactive X chromosome (Xi) superdomains persist. The active and inactive genome compartments in mammoth skin more closely resemble Asian elephant skin than other elephant tissues. Our analyses uncover new biology. Differences in compartmentalization reveal genes whose transcription was potentially altered in mammoths vs. elephants. Mammoth Xi has a tetradic architecture, not bipartite like human and mouse. We hypothesize that, shortly after this mammoth's death, the sample spontaneously freeze-dried in the Siberian cold, leading to a glass transition that preserved subfossils of ancient chromosomes at nanometer scale.

Fatty acids and chlorogenic acid content in Plectranthus edulis root tubers

This study quantified the fatty acid profile and total chlorogenic acid content of various Ethiopian cultivars of the Plectranthus edulis tuber, traditionally known as 'Agew Dinich'. Lipid extraction utilized the Folch method and the acid-catalyzed derivatization method to derivatize the fatty acids into fatty acid methyl ester (FAME) were used. Whereas maceration was used to extract chlorogenic acid from the fresh and freeze- dried tuber samples. Analysis revealed a total of thirteen fatty acids in all P. edulis samples, with nine classified as saturated and four as unsaturated. Palmitic acid was the most abundant fatty acid in P. edulis and accounted for 40.57%-50.21% of the total fatty acid content. The second and third most abundant fatty acids in the P. edulis sample were stearic and linoleic acids, which accounted for 8.38%-12.92% and 8.12%-11.28%, respectively. We reported chlorogenic acid for the first time in this potato species and found it to contain a concentration of 211± 4.2-300±24.7 mg/100g of dry weight basis when the determination was made using fresh samples. On the other hand, these samples yielded a chlorogenic acid concentration ranging from 115 ±8.6 mg/100g-175±3.9 mg/100g of freeze-dried powder samples. These findings suggest that P. edulis tubers could represent a significant dietary source of both chlorogenic acid and fatty acids.

Development and physicochemical characteristics of multicomponent freeze-dried snacks obtained with blackcurrant pomace powder and calcium ions as structuring agents

Consumers seek healthy and sustainable products, whereas the food industry faces the challenge of processing by-products management. The application of fruit pomace as an additive could be a solution addressing the needs of both consumers and producers. The research objective has been to assess the effect of dried blackcurrant pomace powder (BP) and calcium ions in varied concentration on the physicochemical properties of multicomponent freeze-dried snacks as compared to the influence of low-methoxyl pectin (LMP). The snacks were prepared using varied content of BP (1, 3, 5%) and calcium lactate (0, 0.01, 0.05%). Water content and activity, hygroscopic properties, structure, texture, colour, polyphenols content (TPC), and antioxidant activity were analysed. The addition of BP resulted in lowering water activity and porosity. The microstructure of the snacks consisted of a large number of small and unevenly distributed pores. Consequently, the reduction of hygroscopic properties with the growing amount of BP was observed. Applied additives strengthened the structure and caused changes in compression curves indicating enhanced hardness and crispiness. The effect given by 5% of BP was comparable to that obtained with 0.5% of LMP. Additionally, blackcurrant pomace infusion increased TPC and enhanced antioxidant activity but it also caused significant changes in the colour of the snacks. Overall, obtained results have shown that dried blackcurrant pomace powder (BP) can be successfully applied as a food additive supporting stability, texture, and bioactive compounds content, thus fortifying the physicochemical properties of freeze-dried fruit and vegetable snacks.

Optimizing lyophilization primary drying: A vaccine case study with experimental and modeling techniques

In this study, we present the lyophilization process development efforts for a vaccine formulation aimed at optimizing the primary drying time (hence, the total cycle length) through comprehensive evaluation of its thermal characteristics, temperature profile, and critical quality attributes (CQAs). Differential scanning calorimetry (DSC) and freeze-drying microscopy (FDM) were used to experimentally determine the product-critical temperatures, viz., the glass transition temperature (Tg') and the collapse temperature (Tc). Initial lyophilization studies indicated that the conventional approach of targeting product temperature (Tp) below the Tc (determined from FDM) resulted in long and sub-optimal drying times. Interestingly, aggressive drying conditions where the product temperature reached the total collapse temperature did not result in macroscopic collapse but, instead, reduced the drying time by ∼ 45 % while maintaining product quality requirements. This observation suggests the need for a more reliable measurement of the macroscopic collapse temperature for product in vials. The temperature profiles from different lyophilization runs showed a drop in product temperature following the primary drying ramp, of which the magnitude was correlated to the degree of macroscopic collapse. The batch-average product resistance, Rp, determined using the manometric temperature measurement (MTM), decreased with increasing dried layer thickness for aggressive primary drying conditions. A quantitative analysis of the product temperature and resistance profiles combined with qualitative assessment of cake appearance attributes was used to determine a more representative macro-collapse temperature, Tcm, for this vaccine product. A primary drying design space was generated using first principles modeling of heat and mass transfer to enable selection of optimum process parameters and reduce the number of exploratory lyophilization runs. Overall, the study highlights the importance of accurate determination of macroscopic collapse in vials, pursuing aggressive drying based on individual product characteristics, and leveraging experimental and modeling techniques for process optimization.

The Non-Denatured Processing of Brasenia schreberi Mucilage-Characteristics of Hydrodynamic Properties and the Effect on In Vivo Functions

Food non-denatured processes, such as freeze-drying and grinding, are commonly applied to raw materials with good bioactive functions. Although the functional components are maintained, whether structural and physical changes impact the in vivo function is often ignored in practical situations. Brasenia schreberi mucilage (BSM) has a significant alleviation effect on DSS-induced colitis. This work focused on the influence of non-denatured manufacture on the colonic benefits of BSM-based products. First, three forms of products including fresh mucilage (FM), freeze-dried products (FS), and freeze-dried powder (FP) were prepared. Then, their in vitro physiochemical properties were compared, analyzing their influence on the gut inflammation degree, microbial composition, and SCFA production in mice. The results suggested that the water retention rate of FS and FP was decreased to 34.59 ± 3.85%, and 9.93 ± 1.76%. The viscosity of FM, FS, and FP was 20.14 Pa∙s, 4.92 Pa∙s, and 0.41 Pa∙s, respectively. The freeze-drying and grinding process also damaged the lamellar microstructure of BSM. Then, animal tests showed that colitis mice intervened with FM, FS, and FP had disease activity scores of 2.03, 3.95, and 4.62. Meanwhile, FM notably changed the gut microbial composition and significantly increased propionate and butyrate levels. It seemed that the distinct colitis alleviation efficacy of BSM-based products is attributed to different hydrodynamic properties in the gut. FM had relatively higher viscosity and correspondingly high nutritional density in the gut lumen, which stimulates Firmicutes growth and promotes butyrate production, and thereby exhibited the best efficiency on protecting from colitis.

Application of CO2-Laser Micro-Perforation Technology to Freeze-Drying Whole Strawberry (Fragaria ananassa Duch.): Effect on Primary Drying Time and Fruit Quality

Freeze-drying (FD) processing preserves foods by combining the most effective traditional technologies. FD conserves the structure, shape, freshness, nutritional/bioactive value, color, and aroma at levels similar to or better than those of refrigerated and frozen foods while delivering the shelf-stable convenience of canned/hot-air-dehydrated foods. The mass transfer rate is the essential factor that can slow down the FD process, resulting in an excessive primary drying time and high energy consumption. The objective of this study was to reduce the FD processing time using CO2 laser technology to improve product competitiveness in the preservation of whole strawberries. The research process consisted of the selection and characterization of fresh strawberries, followed by preparation, pre-treatment, freeze-drying, a primary drying time assessment, and a quality comparison. Experiments were carried out using strawberries without micro-perforation and with five and eight micro-perforations. Quality parameters were determined for fresh, frozen/thawed, and freeze-dried/rehydrated strawberries. It was found that the primary drying time can be significantly reduced by 20% (95% CI) from 26.7 h for non-perforated fruits to 22.3 h when five micro-perforations are made on each strawberry. The quality parameters used to evaluate the strawberries did not show significant differences when comparing frozen/thawed fruits with freeze-dried/rehydrated fruits. The experiments conducted in this study showed that freeze-drying may efficiently compete with freezing technology when processing whole strawberries.

Freeze-drying revolution: unleashing the potential of lyophilization in advancing drug delivery systems

Lyophilization also known as freeze-drying is a technique that has been employed to enhance the long-term durability of nanoparticles (NPs) that are utilized for drug delivery applications. This method is used to prevent their instability in suspension. However, this dehydration process can cause stress to the NPs, which can be alleviated by the incorporation of excipients like cryoprotectants and lyoprotectants. Nevertheless, the freeze-drying of NPs is often based on empirical principles without considering the physical-chemical properties of the formulations and the engineering principles of freeze-drying. For this reason, it is crucial to optimize the formulations and the freeze-drying cycle to obtain a good lyophilizate and ensure the preservation of NPs stability. Moreover, proper characterization of the lyophilizate and NPs is of utmost importance in achieving these goals. This review aims to update the recent advancements, including innovative formulations and novel approaches, contributing to the progress in this field, to obtain the maximum stability of formulations. Additionally, we critically analyze the limitations of lyophilization and discuss potential future directions. It addresses the challenges faced by researchers and suggests avenues for further research to overcome these limitations. In conclusion, this review is a valuable contribution to the understanding of the parameters involved in the freeze-drying of NPs. It will definitely aid future studies in obtaining lyophilized NPs with good quality and enhanced drug delivery and therapeutic benefits.

Applying innovative technological interventions in the preservation and packaging of fresh seafood products to minimize spoilage - A systematic review and meta-analysis

Seafood, being highly perishable, faces rapid deterioration in freshness, posing spoilage risks and potential health concerns without proper preservation. To combat this, various innovative preservation and packaging technologies have emerged. This review delves into these cutting-edge interventions designed to minimize spoilage and effectively prolong the shelf life of fresh seafood products. Techniques like High-Pressure Processing (HPP), Modified Atmosphere Packaging (MAP), bio-preservation, and active and vacuum packaging have demonstrated the capability to extend the shelf life of seafood products by up to 50%. However, the efficacy of these technologies relies on factors such as the specific type of seafood product and the storage temperature. Hence, careful consideration of these factors is essential in choosing an appropriate preservation and packaging technology.

The Effects of Different Drying Methods on the In Vitro Bioaccessibility of Phenolics, Antioxidant Capacity, and Morphology of European Plums (Prunes domestica L.)

Four different drying methods, hot-air-drying (HAD), vacuum-drying (VD), ultrasound-assisted vacuum-drying (US-VD), and freeze-drying (FD), were used to obtain dried plums (Prunes domesticaL.). These prunes were evaluated for their physical properties (such as color, rehydration ratio, and microstructural properties), phenolic compounds, and antioxidant activities before and after being subjected to in vitro digestion. TPC (total phenolic content) of plums ranged from 196.84 to 919.58 mg of GAE (gallic acid equivalent)/100 g of dw, and neochlorogenic acid was the most abundant phenolic compound. FD prunes had the highest levels of phenolics, whereas US-VD caused the most significant loss. During in vitro digestion, the phenolics were present at higher levels at the gastric medium but failed to maintain their stability at the small intestinal stage. Among the samples, FD along with HAD prunes exhibited a higher bioaccessibility index for most of the phenolic compounds. The ratios of TPC, TFC (total flavonoid content), and individual phenolics determined in the digested residues to the initial values of the undigested samples ranged from 0.23 to 31.03%. It could be concluded that the majority of the phenolics were extracted during digestion. Our findings showed that the different drying methods would alter the microstructure, which would affect the extractability and release of phenolics in the simulated digestion model.

Tailoring microstructure and mechanical properties of pectin cryogels by modulate intensity of ionic interconnection

Porous morphology and mechanical properties determine the applications of cryogels. To understand the influence of the ionic network on the microstructure and mechanical properties of pectin cryogels, we prepared low-methoxyl pectin (LMP) cryogels with different Ca2+ concentrations (measured as R-value, ranging from 0 to 2) through freeze-drying (FD). Results showed that the R-values appeared to be crucial parameters that impact the pore morphology and mechanical characteristics of cryogels. It is achieved by altering the network stability and water state properties of the cryogel precursor. Cryogel precursors with a saturated R-value (R = 1) produced a low pore diameter (0.12 mm) microstructure, obtaining the highest crispness (15.00 ± 1.85) and hardness (maximum positive force and area measuring 2.36 ± 0.31 N and 12.30 ± 1.57 N·s respectively). Hardness showed a negative correlation with Ca2+ concentration when R ≤ 1 (-0.89), and a similar correlation with the porosity of the gel network when R ≥ 1 (-0.80). Given the impacts of crosslinking on the pore structure, it is confirmed that the pore diameter can be designed between 56.24 and 153.58 μm by controlling R-value in the range of 0-2.

Lyoprotectant Constituents Suited for Lyophilization and Reconstitution of Stem-Cell-Derived Extracellular Vesicles

Stem-cell-derived extracellular vesicles (EVs) are emerging as an alternative approach to stem cell therapy. Successful lyophilization of EVs could enable convenient storage and distribution of EV medicinal products at room temperature for long periods, thus considerably increasing the accessibility of EV therapeutics to patients. In this study, we aimed to identify an appropriate lyoprotectant composition for the lyophilization and reconstitution of stem-cell-derived EVs. MSC-derived EVs were lyophilized using different lyoprotectants, such as dimethyl sulfoxide, mannitol, trehalose, and sucrose, at varying concentrations. Our results revealed that a mixture of trehalose and sucrose at high concentrations could support the formation of amorphous ice by enriching the amorphous phase of the solution, which successfully inhibited the acceleration of buffer component crystallization during lyophilization. Lyophilized and reconstituted EVs were thoroughly evaluated for concentration and size, morphology, and protein and RNA content. The therapeutic effects of the reconstituted EVs were examined using a tube formation assay with human umbilical vein endothelial cells. After rehydration of the lyophilized EVs, most of their generic characteristics were well-maintained, and their therapeutic capacity recovered to levels similar to those of freshly collected EVs. The concentrations and morphologies of the lyophilized EVs were similar to the initial features of the fresh EV group until day 30 at room temperature, although their therapeutic capacity appeared to decrease after 7 days. Our study suggests an appropriate composition of lyoprotectants, particularly for EV lyophilization, which could encourage the applications of stem-cell-derived EV therapeutics in the health industry.

Effects of cell morphology on the textural attributes of fruit cubes in freeze-drying: Apples, strawberries, and mangoes as examples

The influence of cell morphology on the textural characteristic of freeze-dried apple, strawberry, and mango cubes was evaluated. Corresponding restructured cube samples without intact cell morphology were prepared as controls. Results indicated that the presence of cell morphology strengthened the shrinkage and collapse of samples during freeze-drying, especially in mangoes due to the high content of sugar. Intact cell morphology was found in natural fruit cubes after freeze-drying by scanning electron microscopy (SEM) observation, making them exhibit a more regular microporous structure, further resulting in higher hardness than the restructured cubes. However, the intact cell morphology negatively affected the crispness of freeze-dried cubes since it enhanced structural collapse. The freeze-dried samples without cell morphology would destroy the cellulose structure and form a continuous open-pore structure under the concentration effect of ice crystals during freezing, which accelerates the escape of water molecules, increases the drying rate, and avoid collapse. Sensory experiments found that restructured cubes without intact cell morphology exhibited greater comprehensive acceptance, suggesting the potential application of cell morphology disruption in the future freeze-drying industry.

Recent Developments in the Hybridization of the Freeze-Drying Technique in Food Dehydration: A Review on Chemical and Sensory Qualities

Freeze-drying is an excellent method for dehydration due to its benefits, including increased shelf-life, unique texture, and, in particular, good nutritive quality. However, the applicability of traditional freeze-drying systems in the food industry is still challenging owing to their prolonged drying duration, extraordinary energy usage, and high process cost. Therefore, the need to upgrade or develop conventional freeze-dryers for common or sophisticated food structures is ever-increasing. Enhancements to the freeze-drying process can significantly speed up drying and reduce energy consumption while maintaining phytochemicals, physical quality, and sensory attributes in final products. To overcome the downsides of conventional freeze-drying, hybrid freeze-drying methods were introduced with a great potential to provide food products at shorter drying durations, lower costs, and environmental friendliness while resulting in the same nutritive and sensory qualities as that of conventional freeze-drying in special circumstances. An overview of the most current improvements, adaptations, and applications of hybrid freeze-drying in food dehydration is given here. In this review, comparative studies are offered to characterize the drying process from the standpoint of chemical quality and sensory attributes. All the reviewed studies confirmed that the nutritional and sensory qualities of the end product can be retained using hybrid freeze-drying almost to the same extent as using single freeze-drying. It was also inferred that hybrid freeze-drying can surpass conventional freeze-drying and allow for obtaining dried products with characteristics typical of raw material if operating parameters are optimized based on product quality and energy usage.

Heat Flux Analysis and Assessment of Drying Kinetics during Lyophilization of Fruits in a Pilot-Scale Freeze Dryer

Vacuum freeze-drying as a process for achieving high product quality has attracted increasing attention in the last decade. Particularly in the pharmaceutical field and food processing industries, lyophilization can produce high-quality products compared to samples dried by conventional methods. Despite its benefits, lyophilization is a time-consuming and costly process that requires optimization of a number of process parameters, including shelf temperature, chamber pressure, freezing rate, and process time. This paper reports on the implementation of heat flux measurements that allow noninvasive real-time determination of the endpoint of the primary drying stage as an essential parameter for the effective optimization of the overall drying time. Quantitative analysis of the drying kinetics of five fruits (kiwifruit, avocado, Asian pear, persimmon, and passion fruit) was assessed by comparing the heat flux and temperature profiles of samples during the lyophilization process. For a 24 h lyophilization cycle, average heat fluxes in the primary drying phase ranged from 250 to 570 W/m2. A significant correlation was found between the temperature and heat flux distributions at the estimated endpoint of the sublimation process and the corresponding transition into the secondary drying stage. Furthermore, good agreement was also found for the freezing phase. The use of real-time heat flux measurements proved to be a cost-effective experimental method to better understand the process variables in order to reduce the lyophilization cycle time and overall energy consumption.

Freeze-Drying Process for the Fabrication of Collagen-Based Sponges as Medical Devices in Biomedical Engineering

This paper presents a systematic review of a key sector of the much promising and rapidly evolving field of biomedical engineering, specifically on the fabrication of three-dimensional open, porous collagen-based medical devices, using the prominent freeze-drying process. Collagen and its derivatives are the most popular biopolymers in this field, as they constitute the main components of the extracellular matrix, and therefore exhibit desirable properties, such as biocompatibility and biodegradability, for in vivo applications. For this reason, freeze-dried collagen-based sponges with a wide variety of attributes can be produced and have already led to a wide range of successful commercial medical devices, chiefly for dental, orthopedic, hemostatic, and neuronal applications. However, collagen sponges display some vulnerabilities in other key properties, such as low mechanical strength and poor control of their internal architecture, and therefore many studies focus on the settlement of these defects, either by tampering with the steps of the freeze-drying process or by combining collagen with other additives. Furthermore, freeze drying is still considered a high-cost and time-consuming process that is often used in a non-optimized manner. By applying an interdisciplinary approach and combining advances in other technological fields, such as in statistical analysis, implementing the Design of Experiments, and Artificial Intelligence, the opportunity arises to further evolve this process in a sustainable and strategic manner, and optimize the resulting products as well as create new opportunities in this field.

Foaming and Other Functional Properties of Freeze-Dried Mare's Milk

The aim of this study was to evaluate the effect of the freeze-drying process on the preservation of mare's milk. This was achieved through the characterization of the functional properties of reconstituted freeze-dried mare's milk. The chemical composition, bulk density, foam capacity, and ability to form emulsions of the atherogenic, thrombogenic, and hypercholesterolemic fatty acid index were investigated. The freeze-drying process did not change the proportion of the milk components in the dry matter. The moisture content of the freeze-dried mare's milk was 10.3 g/kg and the bulk was below 0.1 g/mL. The foaming capacity was 111.3%; hence, the foaming capacity of the milk was very poor. The oil binding capacity was 2.19 g/g of protein. The freeze-drying process improves the binding degree and retention of oil by milk proteins, but produced foam was unstable, short-lived, and lacked the ability to retain air fractions. The atherogenic index and thrombogenic index values calculated for reconstituted milk were 1.02 and 0.53, respectively. The hypercholesterolemia fatty acid index was 25.01.

Application of Physical-Chemical Approaches for Encapsulation of Active Substances in Pharmaceutical and Food Industries

BACKGROUND

Encapsulation is a valuable method used to protect active substances and enhance their physico-chemical properties. It can also be used as protection from unpleasant scents and flavors or adverse environmental conditions.

METHODS

In this comprehensive review, we highlight the methods commonly utilized in the food and pharmaceutical industries, along with recent applications of these methods.

RESULTS

Through an analysis of numerous articles published in the last decade, we summarize the key methods and physico-chemical properties that are frequently considered with encapsulation techniques.

CONCLUSION

Encapsulation has demonstrated effectiveness and versatility in multiple industries, such as food, nutraceutical, and pharmaceuticals. Moreover, the selection of appropriate encapsulation methods is critical for the effective encapsulation of specific active compounds. Therefore, constant efforts are being made to develop novel encapsulation methods and coating materials for better encapsulation efficiency and to improve properties for specific use.

Joseph C, Ismail FN. Influence of Carrier Agents Concentrations and Inlet Temperature on the Physical Quality of Tomato Powder Produced by Spray Drying

The study aims to obtain spray-dried tomato powders with a high and effective product yield and enhanced powder quality. The experiment for this investigation entailed the use of several carrier agents, which were maltodextrin (MD) of 4-7 dextrose equivalents (DE), MD of 10-12 DE, and gum Arabic (GA), each in varied concentrations of 5% and 10% with spray drying inlet temperatures of 140°C, 150°C, and 160°C. Powder yield, bulk density, hygroscopicity, moisture content, water solubility, water absorption, color properties, particle size, and powder morphology were all evaluated in spray-dried tomato powders. The results revealed that the stability of the tomato powder is considerably better at high temperatures and concentrations (at 10%, 160oC), with MD 4-7 DE being the best carrier agent among the three tested carrier agents. According to the powder analysis, the product has a moisture content of 3.17 ± 0.29%, the highest yield percentage of 32.1%, a low bulk density of 0.2943 ± 0.01 g/cm3, the lowest hygroscopicity at 5.67± 0.58 %, a high water solubility index (WSI) at 89.98 ± 1.25%, a low water absorption index (WAI) at 6.22 ± 0.22%, an intermediate particle size of 24.73 µm, and color L*, a*,b* values at 31.59 ± 0.03, 11.62 ± 0.08 and 13.32 ± 0.12. The result showed that at higher temperatures and higher concentrations, the powder characteristics are more likely to have a higher yield, WSI, and larger particle size, as well as lower bulk density, hygroscopicity, moisture content, WAI, and color index.

Skin drug delivery using lipid vesicles: A starting guideline for their development

Lipid vesicles can provide a cost-effective enhancement of skin drug absorption when vesicle production process is optimised. It is an important challenge to design the ideal vesicle, since their properties and features are related, as changes in one affect the others. Here, we review the main components, preparation and characterization methods commonly used, and the key properties that lead to highly efficient vesicles for transdermal drug delivery purposes. We stand by size, deformability degree and drug loading, as the most important vesicle features that determine the further transdermal drug absorption. The interest in this technology is increasing, as demonstrated by the exponential growth of publications on the topic. Although long-term preservation and scalability issues have limited the commercialization of lipid vesicle products, freeze-drying and modern escalation methods overcome these difficulties, thus predicting a higher use of these technologies in the market and clinical practice.

Effects of Freezing Time on Degradation of Durian (Durio Zibethinus Murr.) Fruit's Attributes During the Frozen Storage

Freeze-process has been applied in preserving many fresh horticultural commodities addressed to the medium-distancing distribution. In this study, effect of freezing process and storage time on durian's attributes degradation was observed. 100 durian fruits were treated with two-level combinations of freezing process. The first level involves the freezing of the said fruit at -15°C for two different freezing times, that is 10 min (treatment A) and 20 min (treatment B). Followed by frozen-storage for -10°C for 0, 10, 20 and 30 days. At different interval time, the frozen samples were thawed at 4°C for 24h. Then, physical, chemical, and sensory parameters were periodically assessed. The result showed that treatment B provide a significantly better output than treatment A. This is proven through a lower weight loss, brighter and lighter yellow of the pulp, softer pulp, lower value of moisture content on the pulp, and a remained stable of succinate acid's profile. Furthermore, based on the preference evaluation test, the fruits were accepted by respondents.

Impact of Air-Drying Temperature on Antioxidant Properties and ACE-Inhibiting Activity of Fungal Fermented Lentil Flour

Solid-state fermentation (SSF) with Pleurotus ostreatus enhances the nutritional value of legumes. However, drying can cause significant changes in physical and nutritional properties of the final products. Thus, this work studies the impact of air-drying temperature (50, 60, and 70 °C) on relevant properties (antioxidant properties, ACE-inhibitory capacity, phytic acid, colour, and particle size) of two fermented lentils flour (Pardina and Castellana) using freeze-drying as a reference method. Castellana variety is a better substrate for Pleurotus, generating four times more biomass. In addition, an almost total reduction of phytic acid from 7.3 to 0.9 mg/g db is achieved in this variety. Air-drying significantly decreased the particle size and the final colour with ΔE > 20; nonetheless, the temperature does not play a crucial role. SSF decreased the total phenolic content and the antioxidant capacity regardless of the variety, however, drying at 70 °C increased total phenolic content (186%) in fermented Castellana flour. Comparing drying methods, freeze-drying implied a higher decrease in those parameters, reducing the TPC from 2.4 to 1.6 and from 7.7 to 3.4 mg gallic acid/g db in Pardina and Castellana dried flours. Finally, the flours inhibit the angiotensin I-converting-enzyme, and fermentation and drying increased their potential cardiovascular benefits.

Industrial Biotechnology Conservation Processes: Similarities with Natural Long-Term Preservation of Biological Organisms

Cryopreservation and lyophilization processes are widely used for conservation purposes in the pharmaceutical, biotechnological, and food industries or in medical transplantation. Such processes deal with extremely low temperatures (e.g., -196 °C) and multiple physical states of water, a universal and essential molecule for many biological lifeforms. This study firstly considers the controlled laboratory/industrial artificial conditions used to favor specific water phase transitions during cellular material cryopreservation and lyophilization under the Swiss progenitor cell transplantation program. Both biotechnological tools are successfully used for the long-term storage of biological samples and products, with reversible quasi-arrest of metabolic activities (e.g., cryogenic storage in liquid nitrogen). Secondly, similarities are outlined between such artificial localized environment modifications and some natural ecological niches known to favor metabolic rate modifications (e.g., cryptobiosis) in biological organisms. Specifically, examples of survival to extreme physical parameters by small multi-cellular animals (e.g., tardigrades) are discussed, opening further considerations about the possibility to reversibly slow or temporarily arrest the metabolic activity rates of defined complex organisms in controlled conditions. Key examples of biological organism adaptation capabilities to extreme environmental parameters finally enabled a discussion about the emergence of early primordial biological lifeforms, from natural biotechnology and evolutionary points of view. Overall, the provided examples/similarities confirm the interest in further transposing natural processes and phenomena to controlled laboratory settings with the ultimate goal of gaining better control and modulation capacities over the metabolic activities of complex biological organisms.

Standardized amino acid digestibility and nitrogen-corrected true metabolizable energy of frozen and freeze-dried raw dog foods using precision-fed cecectomized and conventional rooster assays

Commercial raw or minimally-processed diets, often referred to holistically as raw meat-based diets (RMBD) represent a small portion of the pet food market, but the growth of this sector has been significant in recent years. While traditionally, high-moisture, frozen options were the standard format of commercially available raw diets, freeze-dried raw diets have become more prevalent as of late. Despite the increasing popularity of these commercial raw diet formats, there is a dearth of literature describing their nutritional properties, particularly regarding freeze-dried diets. Therefore, the objective of this experiment was to determine and compare the standardized amino acid (AA) digestibilities and nitrogen-corrected true metabolizable energy (TMEn) of raw frozen and freeze-dried dog foods using precision-fed cecectomized and conventional rooster assays. Three formats of frozen or freeze-dried raw diets provided by Primal Pet Foods (Fairfield, CA, USA) were tested: traditional freeze-dried nuggets (T-FDN), hybrid freeze-dried nuggets (H-FDN), and frozen nuggets (FZN). Diets were fed to cecectomized roosters (4 roosters/diet) to determine AA digestibilities, while conventional roosters (4 roosters/diet) were used to determine TMEn. In both cases, after 26 h of feed withdrawal, roosters were tube-fed 12 to 13 g of test diets and 12 to 13 g of corn. Following crop intubation, excreta were collected for 48 h. Endogenous corrections for AA were made using five additional cecectomized roosters. All data were analyzed using the Mixed Models procedure of SAS version 9.4. There were no significant differences in standardized AA digestibilities among diets, with digestibilities being high for all diets tested. For most of the indispensable AA, digestibilities were greater than or equal to 90% for all diets. Histidine and lysine were the exceptions, with digestibilities ranging from 82% to 87% and 87% to 92%, respectively. Moreover, the reactive lysine:total lysine ratio, a measure of heat damage, ranged from 0.91 to 0.95. TMEn values were higher (P = 0.0127) in T-FDN (6.1 kcal/g) and FZN (5.9 kcal/g) than H-FDN (5.3 kcal/g) and were most similar to those estimated by Atwater factors. In general, all diets tested had high AA digestibilities and had TMEn values that were most similar to Atwater factors.

An investigation of correlation between structural and functional properties of Nigella sativa protein isolate

The physicochemical characteristics, amino acid composition, and functional properties of Nigella sativa (NS) seedcake protein extracts were evaluated to establish their potential in nutraceuticals and functional foods. The highest yield (20.2%) of protein isolate (NSPI) from NS seedcake was achieved at an alkali concentration of 0.16 M, a buffer to sample ratio of 1/25 (w/v), extraction time, 15 min, and extraction temperature, 25°C. Amino acid analysis showed that the isolated protein is a good source of amino acids with a significant essential to total amino acid (E/TN) ratio. Further, the protein isolate exhibited maximum solubility at pH 11. The results of the physicochemical analysis clearly indicated that the protein isolate had good water and oil holding capacity, emulsification property, foaming capacity, and foaming stability. The secondary structure of NSPI contained α-helix, β-sheet, and β-turns. In addition, NSPI showed excellent antioxidant, anti-diabetic, and protein digestibility activities. From the experimental data, it could be concluded that NSPI could be an excellent source of proteins for the development of foods with promising functional properties. PRACTICAL APPLICATIONS: Nigella sativa seeds are frequently used as a natural food additive and have been a part of naturopathy for centuries due to their anti-inflammatory, antibacterial, anticancer, antidiabetic, immunomodulatory, and cardioprotective properties. Nigella sativa seedcakes obtained as by-products of the oil extraction process are rich in protein content and can be used as a sustainable source of dietary proteins to cater to a wide range of consumers. Being plant-based, they inherently possess several medicinal properties. Analyzing the physicochemical and functional properties of protein isolated from seedcakes allows us to optimize the protein extraction process while providing a better perspective on its potential in the nutraceuticals and food industries. It can be used as an energy supplement in animal feed as a source of protein to replace soybeans and barley. The antioxidant proteins when added to meat-based products have been known to protect the meat from oxidative stress as well as pathogenic organisms, thus, improving its shelf-life. Nigella sativa protein isolates have several applications in the pharmaceutical industry as well.

Dehydrated Food Waste for Composting: An Overview

Food waste disposal has recently received much attention worldwide due to its major impact on environmental pollution and economic costs. Using high moisture content of food waste has the highest negative environmental impact due to increased greenhouse gas emissions, odor, and leachate. Drying technologies play an important role in reducing the moisture content of food waste, which is necessary for environmental sustainability and safety. The first part of this review highlights that sun-drying is the most cost-effective drying method. However, it has not been widely recommended for food waste management due to several limitations, including the inability to control sunray temperature and the inability to control end-product quality. Thermal drying eliminates moisture from food waste quickly, preventing hydrolysis and biodegradation. Thermal dryers, such as the GAIA GC-300 dryer, and cabinet dryer fitted with a standard tray, are the best alternative to sun drying. The second part of this review highlights that dehydrated food waste products are slightly acidic (4.7–5.1), have a high electrical conductivity (EC) value (4.83–7.64 mS cm-1), with high nutrient content, due to low pH levels, dehydrated food waste is not suitable for direct use as a fertilizer for the plants. So, the dried food waste should be composted before application to the plants because the composting process will dominate the limitation of phytotoxins, anoxia, salinity, and water repellence. Trench compost can be a good choice for decomposing dried organic waste because trench compost relies solely on soil decomposing microorganisms and insects.

Freeze Moisture Treatment and Ozonation of Adlay Starch (Coix lacryma-jobi): Effect on Functional, Pasting, and Physicochemical Properties

Adlay starch has great potential as a cereal starch, but it has several weaknesses, namely a low swelling volume, low solubility, and low stability. The purpose of this study was to improve the characteristics of adlay starch, such as porosity, functional properties, and pasting properties, through starch modification using freeze moisture treatment (FMT) and ozonation. This study consisted of several treatments, namely FMT, ozonation, and a combination of FMT + ozonation. The results show that the FMT and ozonation generally increased water absorption capacity, swelling volume, solubility, and number of pores of the starch granule. The pasting properties showed an increase in the viscosity of the hot paste and caused a decrease in the gelatinization temperature, breakdown, and setback viscosity. FMT 70% + ozonation produced modified adlay starch with a porous granular surface, swelling volume value of 21.10 mL/g, water absorption capacity of 1.54 g/g, a solubility of 9.20%, and an increase in the amorphous structure but did not cause the emergence of new functional groups. The combination of FMT + ozonation was effective in improving the functional, pasting, and physicochemical properties of adlay starch.

A comprehensive review of beetroot (Beta vulgaris L.) bioactive components in the food and pharmaceutical industries

Beetroot is rich in various bioactive phytochemicals, which are beneficial for human health and exert protective effects against several disease conditions like cancer, atherosclerosis, etc. Beetroot has various therapeutic applications, including antioxidant, antibacterial, antiviral, and analgesic functions. Besides the pharmacological effects, food industries are trying to preserve beetroots or their phytochemicals using various food preservation methods, including drying and freezing, to preserve their antioxidant capacity. Beetroot is a functional food due to valuable active components such as minerals, amino acids, phenolic acid, flavonoid, betaxanthin, and betacyanin. Due to its stability, nontoxic and non-carcinogenic and nonpoisonous capabilities, beetroot has been used as an additive or preservative in food processing. Beetroot and its bioactive compounds are well reported to possess antioxidant, anti-inflammatory, antiapoptotic, antimicrobial, antiviral, etc. In this review, we provided updated details on (i) food processing, preservation and colorant methods using beetroot and its phytochemicals, (ii) synthesis and development of several nanoparticles using beetroot and its bioactive compounds against various diseases, (iii) the role of beetroot and its phytochemicals under disease conditions with molecular mechanisms. We have also discussed the role of other phytochemicals in beetroot and their health benefits. Recent technologies in food processing are also updated. We also addressed on molecular docking-assisted biological activity and screening for bioactive chemicals. Additionally, the role of betalain from different sources and its therapeutic effects have been listed. To the best of our knowledge, little or no work has been carried out on the impact of beetroot and its nanoformulation strategies for phytocompounds on antimicrobial, antiviral effects, etc. Moreover, epigenetic alterations caused by phytocompounds of beetroot under several diseases were not reported much. Thus, extensive research must be carried out to understand the molecular effects of beetroot in the near future.

Micro-Encapsulation of Phytochemicals in Passion Fruit Peel Waste Generated on an Organic Farm: Effect of Carriers on the Quality of Encapsulated Powders and Potential for Value-Addition

The passion (Passiflora edulis Sims) fruit peel is rich in phenolics and other bioactive compounds and has great potential as a natural food preservative. The present study investigated the value-adding potential of passion fruit peel waste generated on an organic farm. The effect of carriers in encapsulating the peel extract to develop a polyphenolic-rich powder was investigated. The passion fruit peel extracts were prepared using 70% ethanol (1:10 w/v), and encapsulated using waxy starch (WS), gum arabic (GA), and maltodextrin (MT) before freeze-drying. The effects of carriers on the passion fruit peel powder (PFPP) production yield, physicochemical, rheological, phytochemical, and antioxidant properties were investigated. GA-and MT-encapsulated powders had better physical, phytochemical, and antioxidant properties, including yield, total soluble solids, solubility, bulk density, total phenolic content, and ferric reducing antioxidant powder. A total of 18 metabolites, including phenolic acids (10), flavonoids (6), and stilbenes (2), were tentatively identified in all the PFPP samples, with WS exhibiting a higher concentration of the compounds compared to GA and MT. Our results indicated that no single carrier was associated with all the quality attributes; therefore, better results could be produced by compositing these carriers. Nonetheless, our results highlight the potential of passion fruit peels as a source of polyphenols and functional ingredient in formulating natural food additives.

Effect of Pulsed Electric Field Pre-Treatment and the Freezing Methods on the Kinetics of the Freeze-Drying Process of Apple and Its Selected Physical Properties

The aim of this study was to investigate the effect of application of pulsed electric field (PEF) and different freezing methods (fast, slow and vacuum freezing) on the drying kinetics as well as selected physical properties of freeze-dried apple. The apples were subjected to PEF treatment with range of pulses from 0 to 160 and the intake energy from 0 to 1327 kJ·g⁻¹. Apples with and without PEF treatment were frozen with different rates and the freeze-dried. The water content, water activity and colour attributes of freeze-dried apples were investigated. Regression analysis and fitting procedures showed that among six different models, the Midilli et al. model the best described the drying curves of all dried samples. The highest value of the parameter L* = 71.54 was obtained for freeze-dried sample prepared without PEF pre-treatment and fast frozen. Application of PEF pre-treatment resulted in increase in browning index of freeze-dried apples (BI). The studies confirmed the positive effect of PEF on the freeze drying rate only in the case of the slow or fast freezing of the material after the application of low-energy PEF treatment. However, the increase in drying rate was also observed after application of slow and vacuum freezing of the material without PEF pre-treatment. These technologies can be recommended for optimization of the freeze drying process of apples. The statement that the freeze drying process with application of appropriately selected PEF processing parameters causing only partial destruction of cell membranes can be considered as an innovative contribution to the development of science about the possibilities of PEF application.

Freeze-Dried Tuna Pepsin Powder Stabilized by Some Cryoprotectants: In Vitro Simulated Gastric Digestion toward Different Proteins and Its Storage Stability

The impact of maltodextrin (10%) in combination with trehalose or glycerol at different levels (2.5% and 5%) and their mixture on the stability of freeze-dried pepsin from skipjack tuna stomach was studied. Addition of 5% trehalose and 10% maltodextrin yielded the powder (TPP-T5) with highest relative pepsin activity (p < 0.05). TPP-T5 had different shapes and sizes, with mean particle size of 65.42 ± 57.60 μm, poly-dispersity index of 0.474, and zeta potential of −19.95. It had bulk density of 0.53 kg m−3 and possessed fair flowability. The wetting time for TPP-T5 was 16.36 ± 0.73 min, and solubility was 93.58%. TPP-T5 stored at room temperature under different relative humidities could maintain proteolytic activity up to 4 weeks. Commercial porcine pepsin (CP) and crude tuna pepsinogen had molecular weights of 35.2 and 43.3 kDa, respectively, when analyzed using gel filtration (Sephadex G-50) and SDS-PAGE. Tuna pepsin had comparable hydrolysis toward threadfin bream muscle protein, whey protein isolate, and kidney bean protein isolate to commercial pepsin, especially at a higher level (15 units/g protein). Digested proteins contained peptides with varying molecular weights as determined by MALDI-TOF. Therefore, pepsin from skipjack tuna stomach could replace commercial porcine pepsin and was beneficial supplement for patients with maldigestion, particularly the elderly.