Genome Based Meta-QTL Analysis of Grain Weight in Tetraploid Wheat Identifies Rare Alleles of GRF4 Associated with Larger Grains

Potential of tetraploid wheats in plant breeding: A review

Domestication syndrome, selection pressure, and modern plant breeding programs have reduced the genetic diversity of the wheat germplasm. For the genetic gains of breeding programs to be sustainable, plant breeders require a diverse gene pool to select genes for resistance to biotic stress factors, tolerance to abiotic stress factors, and improved quality and yield components. Thus, old landraces, subspecies and wild ancestors are rich sources of genetic diversity that have not yet been fully exploited, and it is possible to utilize this diversity. Compared with durum wheat, tetraploid wheat subspecies have retained much greater genetic diversity despite genetic drift and various environmental influences, and the identification and utilization of this diversity can make a greater contribution to the genetic enrichment of wheat. In addition, using the pre-breeding method, the valuable left-behind alleles in the wheat gene pool can be re-introduced through hybridization and introgressive gene flow to create a sustainable opportunity for the genetic gain of wheat. This review provides some insights about the potential of tetraploid wheats in plant breeding and the genetic gains made by them in plant breeding across past decades, and gathers the known functional information on genes/QTLs, metabolites, traits and their direct involvement in wheat resistance/tolerance to biotic/abiotic stresses.

GeCKO: user-friendly workflows for genotyping complex genomes using target enrichment capture. A use case on the large tetraploid durum wheat genome

BACKGROUND

Genotyping of individuals plays a pivotal role in various biological analyses, with technology choice influenced by multiple factors including genomic constraints, number of targeted loci and individuals, cost considerations, and the ease of sample preparation and data processing. Target enrichment capture of specific polymorphic regions has emerged as a flexible and cost-effective genomic reduction method for genotyping, especially adapted to the case of very large genomes. However, this approach necessitates complex bioinformatics treatment to extract genotyping data from raw reads. Existing workflows predominantly cater to phylogenetic inference, leaving a gap in user-friendly tools for genotyping analysis based on capture methods. In response to these challenges, we have developed GeCKO (Genotyping Complexity Knocked-Out). To assess the effectiveness of combining target enrichment capture with GeCKO, we conducted a case study on durum wheat domestication history, involving sequencing, processing, and analyzing variants in four relevant durum wheat groups.

RESULTS

GeCKO encompasses four distinct workflows, each designed for specific steps of genomic data processing: (i) read demultiplexing and trimming for data cleaning, (ii) read mapping to align sequences to a reference genome, (iii) variant calling to identify genetic variants, and (iv) variant filtering. Each workflow in GeCKO can be easily configured and is executable across diverse computational environments. The workflows generate comprehensive HTML reports including key summary statistics and illustrative graphs, ensuring traceable, reproducible results and facilitating straightforward quality assessment. A specific innovation within GeCKO is its 'targeted remapping' feature, specifically designed for efficient treatment of targeted enrichment capture data. This process consists of extracting reads mapped to the targeted regions, constructing a smaller sub-reference genome, and remapping the reads to this sub-reference, thereby enhancing the efficiency of subsequent steps.

CONCLUSIONS

The case study results showed the expected intra-group diversity and inter-group differentiation levels, confirming the method's effectiveness for genotyping and analyzing genetic diversity in species with complex genomes. GeCKO streamlined the data processing, significantly improving computational performance and efficiency. The targeted remapping enabled straightforward SNP calling in durum wheat, a task otherwise complicated by the species' large genome size. This illustrates its potential applications in various biological research contexts.

Genomic regions involved in the control of 1,000-kernel weight in wild relative-derived populations of durum wheat

Terminal drought is one of the most common and devastating climatic stress factors affecting durum wheat (Triticum durum Desf.) production worldwide. The wild relatives of this crop are deemed a vast potential source of useful alleles to adapt to this stress. A nested association mapping (NAM) panel was generated using as a recurrent parent the Moroccan variety 'Nachit' derived from Triticum dicoccoides and known for its large grain size. This was recombined to three top-performing lines derived from T. dicoccoides, T. araraticum, and Aegilops speltoides, for a total of 426 inbred progenies. This NAM was evaluated across eight environments (Syria, Lebanon, and Morocco) experiencing different degrees of terminal moisture stress over two crop seasons. Our results showed that drought stress caused on average 41% loss in yield and that 1,000-kernel weight (TKW) was the most important trait for adaptation to it. Genotyping with the 25K TraitGenetics array resulted in a consensus map of 1,678 polymorphic SNPs, spanning 1,723 cM aligned to the reference 'Svevo' genome assembly. Kinship distinguished the progenies in three clades matching the parent of origin. A total of 18 stable quantitative trait loci (QTLs) were identified as controlling various traits but independent from flowering time. The most significant genomic regions were named Q.ICD.NAM-04, Q.ICD.NAM-14, and Q.ICD.NAM-16. Allelic investigation in a second germplasm panel confirmed that carrying the positive allele at all three loci produced an average TKW advantage of 25.6% when field-tested under drought conditions. The underlying SNPs were converted to Kompetitive Allele-Specific PCR (KASP) markers and successfully validated in a third germplasm set, where they explained up to 19% of phenotypic variation for TKW under moisture stress. These findings confirm the identification of critical loci for drought adaptation derived from wild relatives that can now be readily exploited via molecular breeding.

Genetic Basis of Grain Size and Weight in Rice, Wheat, and Barley

Grain size is a key component of grain yield in cereals. It is a complex quantitative trait controlled by multiple genes. Grain size is determined via several factors in different plant development stages, beginning with early tillering, spikelet formation, and assimilates accumulation during the pre-anthesis phase, up to grain filling and maturation. Understanding the genetic and molecular mechanisms that control grain size is a prerequisite for improving grain yield potential. The last decade has brought significant progress in genomic studies of grain size control. Several genes underlying grain size and weight were identified and characterized in rice, which is a model plant for cereal crops. A molecular function analysis revealed most genes are involved in different cell signaling pathways, including phytohormone signaling, transcriptional regulation, ubiquitin-proteasome pathway, and other physiological processes. Compared to rice, the genetic background of grain size in other important cereal crops, such as wheat and barley, remains largely unexplored. However, the high level of conservation of genomic structure and sequences between closely related cereal crops should facilitate the identification of functional orthologs in other species. This review provides a comprehensive overview of the genetic and molecular bases of grain size and weight in wheat, barley, and rice, focusing on the latest discoveries in the field. We also present possibly the most updated list of experimentally validated genes that have a strong effect on grain size and discuss their molecular function.

Simultaneous improvement of grain yield and grain protein concentration in durum wheat by using association tests and weighted GBLUP

KEY MESSAGE

Simultaneous improvement for GY and GPC by using GWAS and GBLUP suggested a significant application in durum wheat breeding. Despite the importance of grain protein concentration (GPC) in determining wheat quality, its negative correlation with grain yield (GY) is still one of the major challenges for breeders. Here, a durum wheat panel of 200 genotypes was evaluated for GY, GPC, and their derived indices (GPD and GYD), under eight different agronomic conditions. The plant material was genotyped with the Illumina 25 k iSelect array, and a genome-wide association study was performed. Two statistical models revealed dozens of marker-trait associations (MTAs), each explaining up to 30%. phenotypic variance. Two markers on chromosomes 2A and 6B were consistently identified by both models and were found to be significantly associated with GY and GPC. MTAs identified for phenological traits co-mapped to well-known genes (i.e., Ppd-1, Vrn-1). The significance values (p-values) that measure the strength of the association of each single nucleotide polymorphism marker with the target traits were used to perform genomic prediction by using a weighted genomic best linear unbiased prediction model. The trained models were ultimately used to predict the agronomic performances of an independent durum wheat panel, confirming the utility of genomic prediction, although environmental conditions and genetic backgrounds may still be a challenge to overcome. The results generated through our study confirmed the utility of GPD and GYD to mitigate the inverse GY and GPC relationship in wheat, provided novel markers for marker-assisted selection and opened new ways to develop cultivars through genomic prediction approaches.

QTL mapping for kernel-related traits in a durum wheat x T. dicoccum segregating population

Durum wheat breeding relies on grain yield improvement to meet its upcoming demand while coping with climate change. Kernel size and shape are the determinants of thousand kernel weight (TKW), which is a key component of grain yield, and the understanding of the genetic control behind these traits supports the progress in yield potential. The present study aimed to dissect the genetic network responsible for kernel size components (length, width, perimeter, and area) and kernel shape traits (width-to-length ratio and formcoefficient) as well as their relationships with kernel weight, plant height, and heading date in durum wheat. Quantitative Trait Locus (QTL) mapping was performed on a segregating population of 110 recombinant inbred lines, derived from a cross between the domesticated emmer wheat accession MG5323 and the durum wheat cv. Latino, evaluated in four different environments. A total of 24 QTLs stable across environments were found and further grouped in nine clusters on chromosomes 2A, 2B, 3A, 3B, 4B, 6B, and 7A. Among them, a QTL cluster on chromosome 4B was associated with kernel size traits and TKW, where the parental MG5323 contributed the favorable alleles, highlighting its potential to improve durum wheat germplasm. The physical positions of the clusters, defined by the projection on the T. durum reference genome, overlapped with already known genes (i.e., BIG GRAIN PROTEIN 1 on chromosome 4B). These results might provide genome-based guidance for the efficient exploitation of emmer wheat diversity in wheat breeding, possibly through yield-related molecular markers.

Association mapping reveals novel genes and genomic regions controlling grain size architecture in mini core accessions of Indian National Genebank wheat germplasm collection

Wheat (Triticum aestivum L.) is a staple food crop for the global human population, and thus wheat breeders are consistently working to enhance its yield worldwide. In this study, we utilized a sub-set of Indian wheat mini core germplasm to underpin the genetic architecture for seed shape-associated traits. The wheat mini core subset (125 accessions) was genotyped using 35K SNP array and evaluated for grain shape traits such as grain length (GL), grain width (GW), grain length, width ratio (GLWR), and thousand grain weight (TGW) across the seven different environments (E₁, E₂, E₃, E₄, E₅, E₅, E₆, and E₇). Marker-trait associations were determined using a multi-locus random-SNP-effect Mixed Linear Model (mrMLM) program. A total of 160 non-redundant quantitative trait nucleotides (QTNs) were identified for four grain shape traits using two or more GWAS models. Among these 160 QTNs, 27, 36, 38, and 35 QTNs were associated for GL, GW, GLWR, and TGW respectively while 24 QTNs were associated with more than one trait. Of these 160 QTNs, 73 were detected in two or more environments and were considered reliable QTLs for the respective traits. A total of 135 associated QTNs were annotated and located within the genes, including ABC transporter, Cytochrome450, Thioredoxin_M-type, and hypothetical proteins. Furthermore, the expression pattern of annotated QTNs demonstrated that only 122 were differentially expressed, suggesting these could potentially be related to seed development. The genomic regions/candidate genes for grain size traits identified in the present study represent valuable genomic resources that can potentially be utilized in the markers-assisted breeding programs to develop high-yielding varieties.

Mapping and validation of major and stable QTL for flag leaf size from tetraploid wheat

The flag leaf is an important photosynthetic organ of wheat (Triticum aestivum L.). Appropriate flag leaf size can effectively increase grain yield. In this study, a tetraploid wheat population of recombinant inbred lines (RILs) and a genetic map constructed based on a wheat 55K single-nucleotide polymorphism (SNP) array were used to identify quantitative trait loci (QTL) for flag leaf length (FLL), flag leaf width (FLW), flag leaf area (FLA), and the flag leaf length/width ratio (FLR). A novel and major interval flanked by markers AX-111633224 and AX-109317229 was identified. This interval includes QTL for FLL (QFll.sau-AM-4B.2), for FLW (QFlw.sau-AM-4B.4), for FLA (QFla.sau-AM-4B), and for FLR (QFlr.sau-AM-4B). Based on the genotypes of the closely linked KASP (Kompetitive allele-specific polymerase chain reaction [PCR]) marker (KASP-AX-108756198), QFlw.sau-AM-4B.4 and QFla.sau-AM-4B were successfully verified in two F₃ populations with different genetic backgrounds. Genetic associations between flag leaf-related traits and other agronomic traits were detected and analyzed. Four genes in this interval were likely involved in the growth and development of the flag leaf size. In conclusion, this study provides clues for excavating genes related to flag leaf size and breeding variety with ideal plant structure.

Identification of stable QTL controlling multiple yield components in a durum × cultivated emmer wheat population under field and greenhouse conditions

Crop yield gains are needed to keep pace with a growing global population and decreasing resources to produce food. Cultivated emmer wheat is a progenitor of durum wheat and a useful source of genetic variation for trait improvement in durum. Here, we evaluated a recombinant inbred line population derived from a cross between the North Dakota durum wheat variety Divide and the cultivated emmer wheat accession PI 272527 consisting of 219 lines. The population was evaluated in 3 field environments and 2 greenhouse experiments to identify quantitative trait locus associated with 11 yield-related traits that were expressed in a consistent manner over multiple environments. We identified 27 quantitative trait locus expressed in at least 2 field environments, 17 of which were also expressed under greenhouse conditions. Seven quantitative trait locus regions on chromosomes 1B, 2A, 2B, 3A, 3B, 6A, and 7B had pleiotropic effects on multiple yield-related traits. The previously cloned genes Q and FT-B1, which are known to be associated with development and morphology, were found to consistently be associated with multiple traits across environments. PI 272527 contributed beneficial alleles for quantitative trait locus associated with multiple traits, especially for seed morphology quantitative trait locus on chromosomes 1B, 2B, and 6A. Three recombinant inbred lines with increased grain size and weight compared to Divide were identified and demonstrated the potential for improvement of durum wheat through deployment of beneficial alleles from the cultivated emmer parent. The findings from this study provide knowledge regarding stable and robust quantitative trait locus that breeders can use for improving yield in durum wheat.

A comprehensive meta-QTL analysis for yield-related traits of durum wheat (Triticum turgidum L. var. durum) grown under different water regimes

Abiotic stress strongly affects yield-related traits in durum wheat, in particular drought is one of the main environmental factors that have effect on grain yield and plant architecture. In order to obtain new genotypes well adapted to stress conditions, the highest number of desirable traits needs to be combined in the same genotype. In this context, hundreds of quantitative trait loci (QTL) have been identified for yield-related traits in different genetic backgrounds and environments. Meta-QTL (MQTL) analysis is a useful approach to combine data sets and for creating consensus positions for the QTL detected in independent studies for the reliability of their location and effects. MQTL analysis is a useful method to dissect the genetic architecture of complex traits, which provide an extensive allelic coverage, a higher mapping resolution and allow the identification of putative molecular markers useful for marker-assisted selection (MAS). In the present study, a complete and comprehensive MQTL analysis was carried out to identify genomic regions associated with grain-yield related traits in durum wheat under different water regimes. A total of 724 QTL on all 14 chromosomes (genomes A and B) were collected for the 19 yield-related traits selected, of which 468 were reported under rainfed conditions, and 256 under irrigated conditions. Out of the 590 QTL projected on the consensus map, 421 were grouped into 76 MQTL associated with yield components under both irrigated and rainfed conditions, 12 genomic regions containing stable MQTL on all chromosomes except 1A, 4A, 5A, and 6B. Candidate genes associated to MQTL were identified and an in-silico expression analysis was carried out for 15 genes selected among those that were differentially expressed under drought. These results can be used to increase durum wheat grain yields under different water regimes and to obtain new genotypes adapted to climate change.

Genome-wide identification and expression profile of GhGRF gene family in Gossypium hirsutum L

Background

Cotton is the primary source of renewable natural fiber in the textile industry and an important biodiesel crop. Growth regulating factors (GRFs) are involved in regulating plant growth and development.

Methods

Using genome-wide analysis, we identified 35 GRF genes in Gossypium hirsutum.

Results

Chromosomal location information revealed an uneven distribution of GhGRF genes, with maximum genes on chromosomes A02, A05, and A12 from the At sub-genome and their corresponding D05 and D12 from the Dt sub-genome. In the phylogenetic tree, 35 GRF genes were divided into five groups, including G1, G2, G3, G4, and G5. The majority of GhGRF genes have two to three introns and three to four exons, and their deduced proteins contained conserved QLQ and WRC domains in the N-terminal end of GRFs in Arabidopsis and rice. Sequence logos revealed that GRF genes were highly conserved during the long-term evolutionary process. The CDS of the GhGRF gene can complement MiRNA396a. Moreover, most GhGRF genes transcripts developed high levels of ovules and fibers. Analyses of promoter cis-elements and expression patterns indicated that GhGRF genes play an essential role in regulating plant growth and development by coordinating the internal and external environment and multiple hormone signaling pathways. Our analysis indicated that GhGRFs are ideal target genes with significant potential for improving the molecular structure of cotton.

Unravelling consensus genomic regions associated with quality traits in wheat using meta-analysis of quantitative trait loci

Meta-analysis in wheat for three major quality traits identified 110 meta-QTL (MQTL) with reduced confidence interval (CI). Five GWAS validated MQTL (viz., 1A.1, 1B.2, 3B.4, 5B.2, and 6B.2), each involving more than 20 initial QTL and reduced CI (95%) (< 2 cM), were selected for quality breeding programmes. Functional characterization including candidate gene mining and expression analysis discovered 44 high confidence candidate genes associated with quality traits. A meta-analysis of quantitative trait loci (QTL) associated with dough rheology properties, nutritional traits, and processing quality traits was conducted in wheat. For this purpose, as many as 2458 QTL were collected from 50 interval mapping studies published during 2013-2020. Of the total QTL, 1126 QTL were projected onto the consensus map saturated with 249,603 markers which led to the identification of 110 meta-QTL (MQTL). These MQTL exhibited an 18.84-fold reduction in the average CI compared to the average CI of the initial QTL (ranging from 14.87 to 95.55 cM with an average of 40.35 cM). Of the 110, 108 MQTL were physically anchored to the wheat reference genome, including 51 MQTL verified with marker-trait associations (MTAs) reported from earlier genome-wide association studies. Candidate gene (CG) mining allowed the identification of 2533 unique gene models from the MQTL regions. In-silico expression analysis discovered 439 differentially expressed gene models with > 2 transcripts per million expressions in grains and related tissues, which also included 44 high-confidence CGs involved in the various cellular and biochemical processes related to quality traits. Nine functionally characterized wheat genes associated with grain protein content, high-molecular-weight glutenin, and starch synthase enzymes were also found to be co-localized with some of the MQTL. Synteny analysis between wheat and rice MQTL regions identified 23 wheat MQTL syntenic to 16 rice MQTL associated with quality traits. Furthermore, 64 wheat orthologues of 30 known rice genes were detected in 44 MQTL regions. Markers flanking the MQTL identified in the present study can be used for marker-assisted breeding and as fixed effects in the genomic selection models for improving the prediction accuracy during quality breeding. Wheat orthologues of rice genes and other CGs available from MQTLs can be promising targets for further functional validation and to better understand the molecular mechanism underlying the quality traits in wheat.

Meta-QTLs, ortho-meta-QTLs and candidate genes for grain yield and associated traits in wheat (Triticum aestivum L.)

In wheat, 2852 major QTLs of 8998 QTLs available for yield and related traits were used for meta-analysis; 141 meta-QTLs were identified, which included 13 breeder's MQTLs and 24 ortho-MQTLs; 1202 candidate genes and 50 homologues of genes for yield from other cereals were also identified. Meta-QTL analysis was conducted using 2852 of the 8998 known QTLs, retrieved from 230 reports published during 1999-2020 (including 19 studies on tetraploid wheat) for grain yield (GY) and the following ten component traits: (i) grain weight (GWei), (ii) grain morphology-related traits (GMRTs), (iii) grain number (GN), (iv) spikes-related traits (SRTs), (v) plant height (PH), (vi) tiller number (TN), (vii) harvest index (HI), (viii) biomass yield (BY), (ix) days to heading/flowering and maturity (DTH/F/M), and (x) grain filling duration (GFD). The study resulted in the identification of 141 meta-QTLs (MQTLs), with an average confidence interval (CI) of 1.4 cM as against a CI of > 12.1 cM (8.8 fold reduction) in the QTLs that were used. The corresponding physical length of CI ranged from 0.01 Mb to 661.9 Mb (mean, 31.5 Mb). Seventy-seven (77) of these 141 MQTLs overlapped marker-trait associations (MTAs) reported in genome-wide association studies. Also, 63 MQTLs (each based on at least 10 QTLs) were considered stable and robust, with 13 MQTLs described as breeder's MQTLs (selected based on small CI, large LOD, and high level of phenotypic variation explained). Thirty-five yield-related genes from rice, barley, and maize were also utilized to identify 50 wheat homologues in MQTLs. Further, the use of synteny and collinearity allowed the identification of 24 ortho-MQTLs which were common among the wheat, barley, rice, and maize. The results of the present study should prove useful for wheat breeding and future basic research in cereals including wheat, barley, rice, and maize.

Major Genomic Regions for Wheat Grain Weight as Revealed by QTL Linkage Mapping and Meta-Analysis

Grain weight is a key determinant for grain yield potential in wheat, which is highly governed by a type of quantitative genetic basis. The identification of major quantitative trait locus (QTL) and functional genes are urgently required for molecular improvements in wheat grain yield. In this study, major genomic regions and putative candidate genes for thousand grain weight (TGW) were revealed by integrative approaches with QTL linkage mapping, meta-analysis and transcriptome evaluation. Forty-five TGW QTLs were detected using a set of recombinant inbred lines, explaining 1.76-12.87% of the phenotypic variation. Of these, ten stable QTLs were identified across more than four environments. Meta-QTL (MQTL) analysis were performed on 394 initial TGW QTLs available from previous studies and the present study, where 274 loci were finally refined into 67 MQTLs. The average confidence interval of these MQTLs was 3.73-fold less than that of initial QTLs. A total of 134 putative candidate genes were mined within MQTL regions by combined analysis of transcriptomic and omics data. Some key putative candidate genes similar to those reported early for grain development and grain weight formation were further discussed. This finding will provide a better understanding of the genetic determinants of TGW and will be useful for marker-assisted selection of high yield in wheat breeding.

Alleles of the GRF3-2A Gene in Wheat and Their Agronomic Value

The Growth-regulating factors (GRF) are a family of plant-specific transcription factors that have roles in plant growth, development and stress response. In this study the diversity of the TaGRF3-2A (TraesCS2A02G435100) gene was investigated in Russian bread wheat germplasm by means of next generation sequencing and molecular markers, and the results compared with those from multiple wheat genome and exome sequencing projects. The results showed that an allele possessing c.495G>T polymorphism found in Bezostaya 1 and designated as TaGRF3-2Ab, is connected with earlier heading and better grain filling under conditions of the Krasnodar Krai. TaGRF3-2Ab is more frequent among Russian winter wheat cultivars than in other germplasms found in the world, implying that it is adaptive for the Chernozem region. A new rare mutation of the TaGRF3-2A was found in the spring wheat cultivar Novosibirskaya 67. The molecular markers developed will facilitate utilization of TaGRF3-2A mutations in future agronomic studies and wheat improvement. Albeit GRF3-2Ab may be good at maintaining high milling quality of the grain, it should be used with caution in breeding of winter wheat cultivars in the perspective of climate change.

Comparative Genomic Analysis of Quantitative Trait Loci Associated With Micronutrient Contents, Grain Quality, and Agronomic Traits in Wheat (Triticum aestivum L.)

Comparative genomics and meta-quantitative trait loci (MQTLs) analysis are important tools for the identification of reliable and stable QTLs and functional genes controlling quantitative traits. We conducted a meta-analysis to identify the most stable QTLs for grain yield (GY), grain quality traits, and micronutrient contents in wheat. A total of 735 QTLs retrieved from 27 independent mapping populations reported in the last 13 years were used for the meta-analysis. The results showed that 449 QTLs were successfully projected onto the genetic consensus map which condensed to 100 MQTLs distributed on wheat chromosomes. This consolidation of MQTLs resulted in a three-fold reduction in the confidence interval (CI) compared with the CI for the initial QTLs. Projection of QTLs revealed that the majority of QTLs and MQTLs were in the non-telomeric regions of chromosomes. The majority of micronutrient MQTLs were located on the A and D genomes. The QTLs of thousand kernel weight (TKW) were frequently associated with QTLs for GY and grain protein content (GPC) with co-localization occurring at 55 and 63%, respectively. The co- localization of QTLs for GY and grain Fe was found to be 52% and for QTLs of grain Fe and Zn, it was found to be 66%. The genomic collinearity within Poaceae allowed us to identify 16 orthologous MQTLs (OrMQTLs) in wheat, rice, and maize. Annotation of promising candidate genes (CGs) located in the genomic intervals of the stable MQTLs indicated that several CGs (e.g., TraesCS2A02G141400, TraesCS3B02G040900, TraesCS4D02G323700, TraesCS3B02G077100, and TraesCS4D02G290900) had effects on micronutrients contents, yield, and yield-related traits. The mapping refinements leading to the identification of these CGs provide an opportunity to understand the genetic mechanisms driving quantitative variation for these traits and apply this information for crop improvement programs.

Genetic identification and characterization of chromosomal regions for kernel length and width increase from tetraploid wheat

BACKGROUND

Improvement of wheat gercTriticum aestivum L.) yield could relieve global food shortages. Kernel size, as an important component of 1000-kernel weight (TKW), is always a significant consideration to improve yield for wheat breeders. Wheat related species possesses numerous elite genes that can be introduced into wheat breeding. It is thus vital to explore, identify, and introduce new genetic resources for kernel size from wheat wild relatives to increase wheat yield.

RESULTS

In the present study, quantitative trait loci (QTL) for kernel length (KL) and width (KW) were detected in a recombinant inbred line (RIL) population derived from a cross between a wild emmer accession 'LM001' and a Sichuan endemic tetraploid wheat 'Ailanmai' using the Wheat 55 K single nucleotide polymorphism (SNP) array-based constructed linkage map and phenotype from six different environments. We identified eleven QTL for KL and KW including two major ones QKL.sicau-AM-3B and QKW.sicau-AM-4B, the positive alleles of which were from LM001 and Ailanmai, respectively. They explained 17.57 to 44.28% and 13.91 to 39.01% of the phenotypic variance, respectively. For these two major QTL, Kompetitive allele-specific PCR (KASP) markers were developed and used to successfully validate their effects in three F3 populations and two natural populations containing a panel of 272 Chinese wheat landraces and that of 300 Chinese wheat cultivars, respectively. QKL.sicau-AM-3B was located at 675.6-695.4 Mb on chromosome arm 3BL. QKW.sicau-AM-4B was located at 444.2-474.0 Mb on chromosome arm 4BL. Comparison with previous studies suggested that these two major QTL were likely new loci. Further analysis indicated that the positive alleles of QKL.sicau-AM-3B and QKW.sicau-AM-4B had a great additive effect increasing TKW by 6.01%. Correlation analysis between KL and other agronomic traits showed that KL was significantly correlated to spike length, length of uppermost internode, TKW, and flag leaf length. KW was also significantly correlated with TKW. Four genes, TRIDC3BG062390, TRIDC3BG062400, TRIDC4BG037810, and TRIDC4BG037830, associated with kernel development were predicted in physical intervals harboring these two major QTL on wild emmer and Chinese Spring reference genomes.

CONCLUSIONS

Two stable and major QTL for KL and KW across six environments were detected and verified in three biparental populations and two natural populations. Significant relationships between kernel size and yield-related traits were identified. KASP markers tightly linked the two major QTL could contribute greatly to subsequent fine mapping. These results suggested the application potential of wheat related species in wheat genetic improvement.

Genomic analysis of ionome-related QTLs in Arabidopsis thaliana

Ionome contributes to maintain cell integrity and acts as cofactors for catalyzing regulatory pathways. Identifying ionome contributing genomic regions provides a practical framework to dissect the genetic architecture of ionomic traits for use in biofortification. Meta-QTL (MQTL) analysis is a robust method to discover stable genomic regions for traits regardless of the genetic background. This study used information of 483 QTLs for ionomic traits identified from 12 populations for MQTL analysis in Arabidopsis thaliana. The selected QTLs were projected onto the newly constructed genetic consensus map and 33 MQTLs distributed on A. thaliana chromosomes were identified. The average confidence interval (CI) of the drafted MQTLs was 1.30 cM, reduced eight folds from a mean CI of 10.88 cM for the original QTLs. Four MQTLs were considered as stable MQTLs over different genetic backgrounds and environments. In parallel to the gene density over the A. thaliana genome, the genomic distribution of MQTLs over the genetic and physical maps indicated the highest density at non- and sub-telomeric chromosomal regions, respectively. Several candidate genes identified in the MQTLs intervals were associated with ion transportation, tolerance, and homeostasis. The genomic context of the identified MQTLs suggested nine chromosomal regions for Zn, Mn, and Fe control. The QTLs for potassium (K) and phosphorus (P) were the most frequently co-located with Zn (78.3%), Mn (76.2%), and Fe (88.2% and 70.6%) QTLs. The current MQTL analysis demonstrates that meta-QTL analysis is cheaper than, and as informative as genome-wide association study (GWAS) in refining the known QTLs.

Meta-QTL analysis and identification of candidate genes for quality, abiotic and biotic stress in durum wheat

The genetic improvement of durum wheat and enhancement of plant performance often depend on the identification of stable quantitative trait loci (QTL) and closely linked molecular markers. This is essential for better understanding the genetic basis of important agronomic traits and identifying an effective method for improving selection efficiency in breeding programmes. Meta-QTL analysis is a useful approach for dissecting the genetic basis of complex traits, providing broader allelic coverage and higher mapping resolution for the identification of putative molecular markers to be used in marker-assisted selection. In the present study, extensive QTL meta-analysis was conducted on 45 traits of durum wheat, including quality and biotic and abiotic stress-related traits. A total of 368 QTL distributed on all 14 chromosomes of genomes A and B were projected: 171 corresponded to quality-related traits, 127 to abiotic stress and 71 to biotic stress, of which 318 were grouped in 85 meta-QTL (MQTL), 24 remained as single QTL and 26 were not assigned to any MQTL. The number of MQTL per chromosome ranged from 4 in chromosomes 1A and 6A to 9 in chromosome 7B; chromosomes 3A and 7A showed the highest number of individual QTL (4), and chromosome 7B the highest number of undefined QTL (4). The recently published genome sequence of durum wheat was used to search for candidate genes within the MQTL peaks. This work will facilitate cloning and pyramiding of QTL to develop new cultivars with specific quantitative traits and speed up breeding programs.

Linkage disequilibrium patterns, population structure and diversity analysis in a worldwide durum wheat collection including Argentinian genotypes

Background

Durum wheat (Triticum turgidum L. ssp. durum Desf. Husn) is the main staple crop used to make pasta products worldwide. Under the current climate change scenarios, genetic variability within a crop plays a crucial role in the successful release of new varieties with high yields and wide crop adaptation. In this study we evaluated a durum wheat collection consisting of 197 genotypes that mainly comprised a historical set of Argentinian germplasm but also included worldwide accessions.

Results

We assessed the genetic diversity, population structure and linkage disequilibrium (LD) patterns in this collection using a 35 K SNP array. The level of polymorphism was considered, taking account of the frequent and rare allelic variants. A total of 1547 polymorphic SNPs was located within annotated genes. Genetic diversity in the germplasm collection increased slightly from 1915 to 2010. However, a reduction in genetic diversity using SNPs with rare allelic variants was observed after 1979. However, larger numbers of rare private alleles were observed in the 2000–2009 period, indicating that a high reservoir of rare alleles is still present among the recent germplasm in a very low frequency. The percentage of pairwise loci in LD in the durum genome was low (13.4%) in our collection. Overall LD and the high (r² > 0.7) or complete (r² = 1) LD presented different patterns in the chromosomes. The LD increased over three main breeding periods (1915–1979, 1980–1999 and 2000–2020).

Conclusions

Our results suggest that breeding and selection have impacted differently on the A and B genomes, particularly on chromosome 6A and 2A. The collection was structured in five sub-populations and modern Argentinian accessions (cluster Q4) which were clearly differentiated. Our study contributes to the understanding of the complexity of Argentinian durum wheat germplasm and to derive future breeding strategies enhancing the use of genetic diversity in a more efficient and targeted way.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-021-07519-z.

A haplotype-led approach to increase the precision of wheat breeding

Crop productivity must increase at unprecedented rates to meet the needs of the growing worldwide population. Exploiting natural variation for the genetic improvement of crops plays a central role in increasing productivity. Although current genomic technologies can be used for high-throughput identification of genetic variation, methods for efficiently exploiting this genetic potential in a targeted, systematic manner are lacking. Here, we developed a haplotype-based approach to identify genetic diversity for crop improvement using genome assemblies from 15 bread wheat (Triticum aestivum) cultivars. We used stringent criteria to identify identical-by-state haplotypes and distinguish these from near-identical sequences (~99.95% identity). We showed that each cultivar shares ~59 % of its genome with other sequenced cultivars and we detected the presence of extended haplotype blocks containing hundreds to thousands of genes across all wheat chromosomes. We found that genic sequence alone was insufficient to fully differentiate between haplotypes, as were commonly used array-based genotyping chips due to their gene centric design. We successfully used this approach for focused discovery of novel haplotypes from a landrace collection and documented their potential for trait improvement in modern bread wheat. This study provides a framework for defining and exploiting haplotypes to increase the efficiency and precision of wheat breeding towards optimising the agronomic performance of this crucial crop.

Brinton, Uauy and colleagues utilize genomic data from the 10+ Wheat Genome Project to develop a useful tool for studying and generating new wheat cultivars. This framework uses advanced exploitation of wheat haplotypes to bring newfound precision and efficiency to wheat breeding.

Molecular Mapping and Genomics of Grain Yield in Durum Wheat: A Review

Durum wheat is the most relevant cereal for the whole of Mediterranean agriculture, due to its intrinsic adaptation to dryland and semi-arid environments and to its strong historical cultivation tradition. It is not only relevant for the primary production sector, but also for the food industry chains associated with it. In Mediterranean environments, wheat is mostly grown under rainfed conditions and the crop is frequently exposed to environmental stresses, with high temperatures and water scarcity especially during the grain filling period. For these reasons, and due to recurrent disease epidemics, Mediterranean wheat productivity often remains under potential levels. Many studies, using both linkage analysis (LA) and a genome-wide association study (GWAS), have identified the genomic regions controlling the grain yield and the associated markers that can be used for marker-assisted selection (MAS) programs. Here, we have summarized all the current studies identifying quantitative trait loci (QTLs) and/or candidate genes involved in the main traits linked to grain yield: kernel weight, number of kernels per spike and number of spikes per unit area.

The combined impacts of wheat spatial position and phenology on cereal aphid abundance

Background

Wheat is a staple crop that suffers from massive yield losses caused by cereal aphids. Many factors can determine the abundance of cereal aphids and the damage they cause to plants; among them are the plant’s genetic background, as well as environmental conditions such as spatial position within the plot, the composition and the distance from neighboring vegetation. Although the effects of these factors have been under scrutiny for many years, the combined effect of both factors on aphid populations is not fully understood. The goal of this study was to examine the collective impact of genotype and environment on wheat phenology (developmental stages), chemical diversity (metabolites), and insect susceptibility, as manifested by cereal aphid abundance.

Methods

To determine the influence of plant genotype on the metrics mentioned above, we measured the phenology, chemical profile, and aphid abundance of four wheat genotypes, including the tetraploid wild emmer (Triticum turgidum ssp. dicoccoides cv. Zavitan), tetraploid durum (Triticum turgidum ssp. durum cv. Svevo), and two hexaploid spring bread (Triticum aestivum), ‘Rotem’ and ‘Chinese Spring’. These genotypes are referred to as “focal” plants. To evaluate the impact of the environment, we scored the distance of each focal plant (spatial position) from two neighboring vegetation types: (i) natural resource and (ii) monoculture wheat resource.

Results

The results demonstrated that the wild emmer wheat was the most aphid-resistant, while the bread wheat Rotem was most aphid-susceptible. Aphids were more abundant in plants that matured early. The spatial position analysis demonstrated that aphids were more abundant in focal plants located closer to the margin monoculture wheat resource rather than to the natural resource, suggesting a resource concentration effect. The analysis of metabolic diversity showed that the levels of three specialized metabolites from the flavonoid class, differed between the wheat genotypes and some minor changes in central metabolites were shown as well. Altogether, these results demonstrate a combined effect of genetic background and spatial position on wheat phenology and aphid abundance on plants. This exposes the potential role of the marginal vegetation environment in shaping the insect population of desirable crops. These findings highlight the importance of maintaining plant intra-specific variation in the agriculture system because of its potential applications in reducing pest density.

Genetics of yield, abiotic stress tolerance and biofortification in wheat (Triticum aestivum L.)

A review of the available literature on genetics of yield and its component traits, tolerance to abiotic stresses and biofortification should prove useful for future research in wheat in the genomics era. The work reviewed in this article mainly covers the available information on genetics of some important quantitative traits including yield and its components, tolerance to abiotic stresses (heat, drought, salinity and pre-harvest sprouting = PHS) and biofortification (Fe/Zn and phytate contents with HarvestPlus Program) in wheat. Major emphasis is laid on the recent literature on QTL interval mapping and genome-wide association studies, giving lists of known QTL and marker-trait associations. Candidate genes for different traits and the cloned and characterized genes for yield traits along with the molecular mechanism are also described. For each trait, an account of the present status of marker-assisted selection has also been included. The details of available results have largely been presented in the form of tables; some of these tables are included as supplementary files.

Allele mining of TaGRF-2D gene 5'-UTR in Triticum aestivum and Aegilops tauschii genotypes

The low diversity of the D-subgenome of bread wheat requires the involvement of new alleles for breeding. In grasses, the allelic state of Growth Regulating Factor (GRF) gene is correlated with nitrogen uptake. In this study, we characterized the sequence of TaGRF-2D and assessed its diversity in bread wheat and goatgrass Aegilops tauschii (genome DD). In silico analysis was performed for reference sequence searching, primer pairs design and sequence assembly. The gene sequence was obtained using Illumina and Sanger sequencing. The complete sequences of TaGRF-2D were obtained for 18 varieties of wheat. The polymorphism in the presence/absence of two GCAGCC repeats in 5' UTR was revealed and the GRF-2D-SSR marker was developed. Our results showed that the alleles 5' UTR-250 and 5' UTR-238 were present in wheat varieties, 5' UTR-250 was presented in the majority of wheat varieties. In Ae. tauschii ssp. strangulata (likely donor of the D-subgenome of polyploid wheat), most accessions carried the 5' UTR-250 allele, whilst most Ae. tauschii ssp. tauschii have 5' UTR-244. The developed GRF-2D-SSR marker can be used to study the genetic diversity of wheat and Ae. tauschii.

GNI-A1 mediates trade-off between grain number and grain weight in tetraploid wheat

Wild emmer allele of GNI-A1 ease competition among developing grains through the suppression of floret fertility and increase grain weight in tetraploid wheat. Grain yield is a highly polygenic trait determined by the number of grains per unit area, as well as by grain weight. In wheat, grain number and grain weight are usually negatively correlated. Yet, the genetic basis underlying trade-off between the two is mostly unknown. Here, we fine-mapped a grain weight QTL using wild emmer introgressions in a durum wheat background and showed that grain weight is associated with the GNI-A1 gene, a regulator of floret fertility. In-depth characterization of grain number and grain weight indicated that suppression of distal florets by the wild emmer GNI-A1 allele increases weight of proximal grains in basal and central spikelets due to alteration in assimilate distribution. Re-sequencing of GNI-A1 in tetraploid wheat demonstrated the rich allelic repertoire of the wild emmer gene pool, including a rare allele which was present in two gene copies and contained a nonsynonymous mutation in the C-terminus of the protein. Using an F₂ population generated from a cross between wild emmer accessions Zavitan, which carries the rare allele, and TTD140, we demonstrated that this unique polymorphism is associated with grain weight, independent of grain number. Moreover, we showed, for the first time, that GNI-A1 proteins are transcriptional activators and that selection targeted compromised activity of the protein. Our findings expand the knowledge of the genetic basis underlying trade-off between key yield components and may contribute to breeding efforts for enhanced grain yield.