A New Strategy for Heavy Metal Polluted Environments: A Review of Microbial Biosorbents

Mechanism and application of bacterial exopolysaccharides: An advanced approach for sustainable heavy metal abolition from soil

The escalation of heavy metal pollutants in soils and effluents, driven by industrialization and human activities, poses significant environmental and health risks. Conventional remediation methods are often costly and ineffective, prompting a shift towards sustainable alternatives such as biological treatments. Natural biosorbents, including microbial cells and their byproducts, have emerged as promising solutions. One such approach involves leveraging exopolysaccharides (EPS), complex high-molecular-weight biopolymers synthesized by microbes under environmental stress conditions. EPS are intricate organic macromolecules comprising proteins, polysaccharides, uronic acids, humic compounds, and lipids, either located within microbial cells or secreted into their surroundings. Their anionic functional groups enable efficient electrostatic binding of cationic heavy metals, making EPS effective biosorbents for soil remediation. This review thoroughly explores the pivotal role of bacterial EPS in the removal of heavy metals, focusing on EPS biosynthesis mechanisms, the dynamics of interaction with heavy metals, and case studies that illustrate their effectiveness in practical remediation strategies. By highlighting these aspects, the review underscores the innovation and practical implications of EPS-based bioremediation technologies, demonstrating their potential to address critical environmental challenges effectively while paving the way for sustainable environmental management practices. Key findings reveal that EPS exhibit robust metal-binding capacities, facilitated by their anionic functional groups, thereby offering a promising solution for mitigating metal pollution in diverse environmental matrices.

Isolation and characterization of chromium-resistant bacteria and their effects on germination, growth, and Cr accumulation in Capsicum annum (L.) under Cr stress

Chromium (Cr) is a well-known environmental pollutant while less information is available on the role of Cr-resistant bacteria in the alleviation of Cr-stress in chili (Capsicum annum L.) plants. Effect of Cr-resistant bacterial strains on growth and Cr uptake by chili plants was investigated. The results revealed that Cr-stress showed a negative effect on germination, photosynthesis, and relative water content but the inoculation ameliorated the plant stress. Chromium-resistant bacterial strains enhanced the shoot and root growth (33% SL, 19.7% RL), shoot and root dry weight (35%, 32.9%), relative water content (32.25%), membrane stability index (46.52%) SPAD value (50.76%), Cr concentration in shoots and roots (19.87 and 18.52 mg kg-1), bioaccumulation and translocation factor (0.396 mgkg-1), and seedling vigor index (40.8%) of plants. Chromium-resistant bacterial strains enhanced the NPK uptake while reduced Cr uptake by plants. The morphological and biochemical examination of rhizobacterial strains (and NM28) resistant to Cr-stress revealed smooth, off-white colonies of bacteria composed of rod-shaped cells which are Gram positive in reaction while negative in catalase activity. High quantities of malic acid were produced by bacterial strains under study i.e. NM8 (926.12 μgmL-2) and NM28 (992.25 μgmL-2). These strains were identified as Bacillus cereus strain NM8 and Bacillus subtilis strain NM28 through 16S rRNA sequencing. Results showed that B. cereus strain NM28 is more effective than B. cereus strain NM8 in promoting the growth of Cr-stressed Chili that might be suitable to develop biofertilizer for sustainable production of vegetables under metal stress.

Microalgae: A Biological Tool for Removal and Recovery of Potentially Toxic Elements in Wastewater Treatment Photobioreactors

Potentially toxic elements (PTE) pollution in water bodies is an emerging problem in recent decades due to uncontrolled discharges from human activities. Copper, zinc, arsenic, cadmium, lead, mercury, and uranium are considered potentially toxic and carcinogenic elements that threaten human health. Microalgae-based technologies for the wastewater treatment have gained importance in recent years due to their biomass high growth rates and effectiveness. Also, these microalgae-bacteria systems are cost-effective and environmentally friendly, utilize sunlight and CO2, and simultaneously address multiple environmental challenges, such as carbon mitigation, bioremediation, and generation of valuable biomass useful for biofuel production. Additionally, microalgae possess a diverse array of extracellular and intracellular mechanisms that enable them to remove and mitigate the toxicity of PTE present in wastewater. Therefore, photobioreactors are promising candidates for practical applications in bioremediation of wastewater containing toxic elements. Despite the increasing amount of research in this field in recent years, most studies are conducted in laboratory scale and there is a scarcity of large-scale studies under real and variable environmental conditions. Besides, the limited understanding of the multiple mechanisms controlling PTE biosorption in wastewater containing high organic matter loads and potentially toxic elements requires further studies. This chapter provides a schematic representation of the mechanisms and factors involved in the remediation of potentially toxic elements by microalgae, as well as the main results obtained in recent years.

Plant growth promoting bacteria (PGPB)-induced plant adaptations to stresses: an updated review

Plants and bacteria are co-evolving and interact with one another in a continuous process. This interaction enables the plant to assimilate the nutrients and acquire protection with the help of beneficial bacteria known as plant growth-promoting bacteria (PGPB). These beneficial bacteria naturally produce bioactive compounds that can assist plants' stress tolerance. Moreover, they employ various direct and indirect processes to induce plant growth and protect plants against pathogens. The direct mechanisms involve phytohormone production, phosphate solubilization, zinc solubilization, potassium solubilization, ammonia production, and nitrogen fixation while, the production of siderophores, lytic enzymes, hydrogen cyanide, and antibiotics are included under indirect mechanisms. This property can be exploited to prepare bioformulants for biofertilizers, biopesticides, and biofungicides, which are convenient alternatives for chemical-based products to achieve sustainable agricultural practices. However, the application and importance of PGPB in sustainable agriculture are still debatable despite its immense diversity and plant growth-supporting activities. Moreover, the performance of PGPB varies greatly and is dictated by the environmental factors affecting plant growth and development. This review emphasizes the role of PGPB in plant growth-promoting activities (stress tolerance, production of bioactive compounds and phytohormones) and summarises new formulations and opportunities.

Insights into trehalose mediated physiological and biochemical mechanisms in Zea mays L. under chromium stress

BACKGROUND

Chromium (Cr) toxicity significantly threatens agricultural ecosystems worldwide, adversely affecting plant growth and development and reducing crop productivity. Trehalose, a non-reducing sugar has been identified as a mitigator of toxic effects induced by abiotic stressors such as drought, salinity, and heavy metals. The primary objective of this study was to investigate the influence of exogenously applied trehalose on maize plants exposed to Cr stress.

RESULTS

Two maize varieties, FH-1046 and FH-1453, were subjected to two different Cr concentrations (0.3 mM, and 0.5 mM). The results revealed significant variations in growth and biochemical parameters for both maize varieties under Cr-induced stress conditions as compared to the control group. Foliar application of trehalose at a concentration of 30 mM was administered to both maize varieties, leading to a noteworthy reduction in the detrimental effects of Cr stress. Notably, the Cr (0.5 mM) stress more adversely affected the shoot length more than 0.3mM of Cr stress. Cr stress (0.5 mM) significantly reduced the shoot length by 12.4% in FH-1046 and 24.5% in FH-1453 while Trehalose increased shoot length by 30.19% and 4.75% in FH-1046 and FH-1453 respectively. Cr stress significantly constrained growth and biochemical processes, whereas trehalose notably improved plant growth by reducing Cr uptake and minimizing oxidative stress caused by Cr. This reduction in oxidative stress was evidenced by decreased production of proline, SOD, POD, MDA, H2O2, catalase, and APX. Trehalose also enhanced photosynthetic activities under Cr stress, as indicated by increased values of chlorophyll a, b, and carotenoids. Furthermore, the ameliorative potential of trehalose was demonstrated by increased contents of proteins and carbohydrates and a decrease in Cr uptake.

CONCLUSIONS

The study demonstrates that trehalose application substantially improved growth and enhanced photosynthetic activities in both maize varieties. Trehalose (30 mM) significantly increased the plant biomass, reduced ROS production and enhanced resilience to Cr stress even at 0.5 mM.

Biomedical engineering utilizing living photosynthetic cyanobacteria and microalgae: Current status and future prospects

Cyanobacteria are the only prokaryotes capable of performing oxygenic photosynthesis on Earth. Besides their traditional roles serving as primary producers, cyanobacteria also synthesize abundant secondary metabolites including carotenoids, alkaloids, peptides, which have been reported to possess medicinal potentials. More importantly, the advancement of synthetic biology technology has further expanded their potential biomedical applications especially using living/engineered cyanobacteria, providing promising and attractive strategies for future disease treatments. To improve the understanding and to facilitate future applications, this review aims to discuss the current status and future prospects of cyanobacterial-based biomedical engineering. Firstly, specific properties of cyanobacteria related with biomedical applications like their natural products of bioactive compounds and heavy metal adsorption were concluded. Subsequently, based on these properties of cyanobacteria, we discussed the progress of their applications in various disease models like hypoxia microenvironment alleviation, wound healing, drug delivery, and so on. Finally, the future prospects including further exploration of cyanobacteria secondary metabolites, the integration of bioactive compounds synthesized by cyanobacteria in situ with medical diagnosis and treatment, and the optimization of in vivo application were critically presented. The review will promote the studies related with cyanobacteria-based biomedical engineering and its practical application in clinical trials in the future.

Microbial mediated remediation of heavy metals toxicity: mechanisms and future prospects

Heavy metal pollution has become a serious concern across the globe due to their persistent nature, higher toxicity, and recalcitrance. These toxic metals threaten the stability of the environment and the health of all living beings. Heavy metals also enter the human food chain by eating contaminated foods and cause toxic effects on human health. Thus, remediation of HMs polluted soils is mandatory and it needs to be addressed at higher priority. The use of microbes is considered as a promising approach to combat the adverse impacts of HMs. Microbes aided in the restoration of deteriorated environments to their natural condition, with long-term environmental effects. Microbial remediation prevents the leaching and mobilization of HMs and they also make the extraction of HMs simple. Therefore, in this context recent technological advancement allowed to use of bioremediation as an imperative approach to remediate polluted soils. Microbes use different mechanisms including bio-sorption, bioaccumulation, bioleaching, bio-transformation, bio-volatilization and bio-mineralization to mitigate toxic the effects of HMs. Thus, keeping in the view toxic HMs here in this review explores the role of bacteria, fungi and algae in bioremediation of polluted soils. This review also discusses the various approaches that can be used to improve the efficiency of microbes to remediate HMs polluted soils. It also highlights different research gaps that must be solved in future study programs to improve bioremediation efficency.

Adsorption of Cd2+ by Lactobacillus plantarum Immobilized on Distiller's Grains Biochar: Mechanism and Action

Immobilized microbial technology has recently emerged as a prominent research focus for the remediation of heavy metal pollution because of its superior treatment efficiency, ease of operation, environmental friendliness, and cost-effectiveness. This study investigated the adsorption characteristics and mechanisms of Cd2+ solutions by Lactobacillus plantarum adsorbed immobilized on distiller's grains biochar (XIM) and Lactobacillus plantarum-encapsulated immobilized on distiller's grains biochar (BIM). The findings reveal that the maximum adsorption capacity and efficiency were achieved at a pH solution of 6.0. Specifically, at an adsorption equilibrium concentration of cadmium at 60 mg/L, XIM and BIM had adsorption capacities of 8.40 ± 0.30 mg/g and 12.23 ± 0.05 mg/g, respectively. BIM demonstrated noticeably greater adsorption capacities than XIM at various cadmium solution concentrations. A combination of isothermal adsorption modeling, kinetic modeling, scanning electron microscopy-energy dispersive X-ray spectroscopy, X-ray diffractometer (XRD), and Fourier-transform infrared spectroscopy (FTIR) analyses showed that cadmium adsorption by XIM primarily involved physical adsorption and pore retention. In contrast, the adsorption mechanism of BIM was mainly attributed to the formation of Cd(CN)2 crystals.

Toward a more realistic estimate of exposure to chromium and nickel in soils of geogenic and/or anthropogenic origin: importance of oral bioaccessibility

To enhance risk assessment for contaminated sites, incorporating bioavailability through bioaccessibility as a corrective factor to total concentration is essential to provide a more realistic estimate of exposure. While the main in vitro tests have been validated for As, Cd, and/or Pb, their potential for assessing the bioaccessibility of additional elements remains underexplored. In this study, the physicochemical parameters, pseudototal Cr and Ni concentrations, soil phase distribution, and oral bioaccessibility of twenty-seven soil samples were analysed using both the ISO 17924 standard and a simplified test based on hydrochloric acid. The results showed wide variability in terms of the concentrations (from 31 to 21,079 mg kg-1 for Cr, and from 26 to 11,663 mg kg-1 for Ni) and generally low bioaccessibility for Cr and Ni, with levels below 20% and 30%, respectively. Bioaccessibility variability was greater for anthropogenic soils, while geogenic enriched soils exhibited low bioaccessibility. The soil parameters had an influence on bioaccessibility, but the effects depended on the soils of interest. Sequential extractions provided the most comprehensive explanation for bioaccessibility. Cr and Ni were mostly associated with the residual fraction, indicating limited bioaccessibility. Ni was distributed in all phases, whereas Cr was absent from the most mobile phase, which may explain the lower bioaccessibility of Cr compared to that of Ni. The study showed promising results for the use of the simplified test to predict Cr and Ni bioaccessibility, and its importance for more accurate human exposure evaluation and effective soil management practices.

The role and mechanism of Bacillus megaterium strain A14 in inhibiting the cadmium uptake by peanut plants in acidic red soil

AIMS

This study explores the potential of cadmium (Cd)-resistant bacteria, specifically Bacillus megaterium A14, to decrease Cd accumulation in peanuts, a crop susceptible to metal uptake from contaminated soils, by understanding the bacterium's impact on plant Cd absorption mechanisms.

METHODS AND RESULTS

Through pot experiments, we observed that A14 inoculation significantly increased peanut biomass under Cd stress conditions, primarily by immobilizing the metal and reducing its bioavailability. The bacterium effectively changed the distribution of Cd, with a notable 46.53% reduction in the exchangeable fraction, which in turn limited the expression of genes related to Cd transport in peanuts. Additionally, A14 enhanced the plant's antioxidant response, improving its tolerance to stress. Microbial analysis through 16S sequencing demonstrated that A14 inoculation altered the peanut rhizosphere, particularly by increasing populations of Firmicutes and Proteobacteria, which play crucial roles in soil remediation from heavy metals.

CONCLUSION

The A14 strain effectively counters Cd toxicity in peanuts, promoting growth through soil Cd sequestration, root barrier biofilm formation, antioxidant system enhancement, suppression of Cd transport genes, and facilitation of Cd-remediating microorganisms.

Bioaccumulation and transferreing for impacts on Cd and Pb by aphid consumption of the broad bean, Vicia faba L, in soil heavy metal pollution

Heavy metal pollution threatens human and ecological health. Heavy metals can exist in the soil for a long time and migrate to organisms along the food chain. However, only a few studies have investigated the effects of a single stress on broad beans. Here, we aimed to characterize Cd and Pb bioaccumulation, at varying concentrations, in the broad bean, Vicia faba L. We also determined how the bioaccumulated metals are impacted by aphids that consume the plant. No significant difference was noted in the germination rates of broad beans at the early stage of planting (after 8 days), but eventually, the germination rates of broad beans at all time points first decreased and then increased, and the highest inhibition efficiency was observed in the T3 group (12.5 mg/L Cd2+ + 50 mg/L Pb2+). Fourteen days after planting, there was no significant difference in seedling height between the T5 (50 mg/L Cd2+ + 200 mg/L Pb2+) and control groups; however, that in the other groups decreased significantly and there was no dependence between stress concentration and inhibition efficiency. In addition, both Cd and Pb in the soil could be transferred to broad beans, and the concentration of Pb in the roots of broad beans was greater than that of Cd, whereas the opposite was observed in the stems and leaves. Notably, under mixed stress, aphids could significantly reduce the content of Cd in broad beans; similarly, the Pb content in the roots and stems of broad beans decreased significantly after being infested with aphids but increased significantly in the leaves. Further, the aphid infestation decreased the Pb content in the soil and the soil Cd content in the highest concentration group (T5 group) (50 mg/L Cd2+ + 200 mg/L Pb2+). These results highlight the necessity of focusing on the effect of insects on heavy metal remediation in plants and provide a new perspective for reducing plant Cd toxicity.

Evaluation of resistance patterns and bioremoval efficiency of hydrocarbons and heavy metals by the mycobiome of petroleum refining wastewater in Jazan with assessment of molecular typing and cytotoxicity of Scedosporium apiospermum JAZ-20

Jazan Industrial Economic City (JIEC) is located on the Red Sea coast in the province of Jazan, southwest of Saudi Arabia anchors diverse heavy and secondary industries in the energy, water desalination, petroleum, aluminum, copper, refineries, pharmaceuticals and food manufacturing fields. These various industries generate a large quantity of industrial wastewaters containing various toxicants. The present work represents ecologically beneficial alternatives for the advancement of environmental biotechnology, which could help mitigate the adverse impacts of environmental pollution resulting from petroleum refining effluents. The mycobiome (32 fungal strains) isolated from the industrial wastewater of the refinery sector in Jazan were belonged to five fungal genera including Fusarium, Verticillium, Purpureocillium, Clavispora and Scedosporium with a distribution percentage of 31.25, 21.88, 15.63, 12.50 and 18.75 %, respectively. These isolates showed multimetals tolerance and bioremoval efficiency against a large number of heavy metals (Fe2+, Ni2+, Cr6+, Zn2+, As3+, Cu2+, Cd2+, Pb2+, Ag+ and Hg2+) along with potent bioremediation activity toward crude oil and the polycyclic aromatic hydrocarbons. Interestingly, the mycobiome resistance patterns obtained against different classes of fungal antibiotics including azole (fluconazole, itraconazole, voriconazole, posaconazole, isavuconazole and ketoconazole), echinocandin (anidulafungin, caspofungin and micafungin) and polyene (amphotericin B) drugs proved the prevalence of antibiotic resistance among the mycobiome of refinery industry in Saudi Arabia is relatively low. The fungal isolate under isolation code JAZ-20 showed the highest bioremoval efficiency against heavy metals (90.8-100.0 %), crude oil (89.50 %), naphthalene (96.7 %), phenanthrene (92.52 %), fluoranthene (100.0 %), anthracene (90.34 %), pyrene (85.60 %) and chrysene (83.4 %). It showed the highest bioremoval capacity ranging from 85.72 % to 100.0 % against numerous pollutants found in a wide array of industrial effluents, including diclofenac, ibuprofen, carbamazepine, acetaminophen, sulfamethoxazole, bisphenol, bleomycin, vincristine, dicofol, methyl parathion, atrazine, diuron, dieldrin, chlorpyrifos, profenofos and phenanthrene. The isolate JAZ-20 was chosen for molecular typing, cytotoxicity assessment, analysis of volatile compounds and optimization investigations. Based on phenotypic, biochemical and phylogenetic analysis, strain JAZ-20 identified as Scedosporium apiospermum JAZ-20. This strain is newly discovered in industrial effluents in Saudi Arabia. Fungal strain JAZ-20 consistently produced various types of saturated and unsaturated fatty acids. the main fatty acids were C14:0 (1.95 %), iso-C14:0 (2.98 %), anteiso-C14:0 (2.13 %), iso-C15:0 (9.16 %), anteiso-C15:0 (11.75 %), C15:0 (7.42 %), C15:1 (2.37 %), anteiso-C16:0 (3.4 %), C16:0 (10.3 %), iso-C16:0 (9.5 %), C17:1 (1.36 %), anteiso-C17:1 (8.64 %), iso-C18:0 (11.0 %), C18:0 (3.63 %), anteiso-C19:0 (3.78 %), anteiso-C20:0 (2.0 %), iso-C21:0 (2.44 %), C23:0 (1.15 %), and C24:0 (2.17 %). These fatty acids serve as natural and eco-friendly antifungal agents, promoting fungal resistance and inhibiting the production of mycotoxins in the environment. Despite being an environmental isolate, its cytotoxicity was assessed against both normal and cancerous human cell lines. The IC50 values of JAZ-20 extract were 8.92, 10.41, 20.0, 16.5, and 40.0 μg/mL against WI38, MRC5, MCF10A, HEK293 and HDFs normal cells and 43.26, 33.75, and 40.0 μg/mL against liver (HepG2), breast (A549) and cervix (HeLa) cancers, respectively. Based on gas chromatography-mass spectrometry (GC-MS), analysis the extract of S. apiospermum JAZ-20 showed 47 known volatile compounds (VOCs) for varied and significant biological activities. Enhancing the bioremoval efficiency of heavy metals from actual refining wastewater involves optimizing process parameters. The parameters optimized were the contact time, the fungal biomass dosage, pH, temperature and agitation rate.

Impact of oxidative stress induced by heavy metals on ovarian function

As a crucial organ of the female reproductive system, the ovary has both reproductive and endocrine functions. Oxidative stress refers to an increase in intracellular reactive oxygen species (ROS), which play a role in the normal physiological activity of the ovary. However, excessive ROS can cause damage to the ovary. With the advancement of human industrial activities, heavy metal pollution has become increasingly severe. Heavy metals cause oxidative stress through both direct and indirect mechanisms, leading to changes in signal transduction pathways that damage the ovaries. This review aims to outline the adverse effects of oxidative stress on the ovaries triggered by heavy metals such as copper, arsenic, cadmium, mercury, and lead. The detrimental effects of heavy metals on ovaries include follicular atresia and decreased estrogen production in experimental animals, and they also cause premature ovarian insufficiency in women. Additionally, this review discusses the role of antioxidants, provides some treatment methods, summarizes the limitations of current research, and offers perspectives for future research directions.

Exploring the Potential of Endophytic Microorganisms and Nanoparticles for Enhanced Water Remediation

Endophytic microorganisms contribute significantly to water bioremediation by enhancing pollutant degradation and supporting aquatic plant health and resilience by releasing bioactive compounds and enzymes. These microorganisms inhabit plant tissues without causing disease or any noticeable symptoms. Endophytes effectively aid in eliminating contaminants from water systems. Nanoparticles serve as potent enhancers in bioremediation processes, augmenting the efficiency of pollutant degradation by increasing surface area and bioavailability, thereby improving the efficacy and rate of remediation. Their controlled nutrient release and ability to stabilize endophytic colonization further contribute to the enhanced and sustainable elimination of contaminated environments. The synergistic effect of endophytes and nanoparticles in water remediation has been widely explored in recent studies, revealing compelling outcomes. Water pollution poses significant threats to human health, ecosystems, and economies; hence, the sixth global goal of the Sustainable Development Agenda 2030 of the United Nations aims to ensure the availability and sustainable management of water resources, recognizing their crucial importance for current and future generations. Conventional methods for addressing water pollution exhibit several limitations, including high costs, energy-intensive processes, the production of hazardous by-products, and insufficient effectiveness in mitigating emerging pollutants such as pharmaceuticals and microplastics. Noticeably, there is an inability to effectively remove various types of pollutants, thus resulting in incomplete purification cycles. Nanoparticle-enhanced water bioremediation offers an innovative, eco-friendly alternative for degrading contaminants. A growing body of research has shown that integrating endophytic microorganisms with nanoparticles for water bioremediation is a potent and viable alternative. This review examines the potential of using endophytic microorganisms and nanoparticles to enhance water remediation, exploring their combined effects and applications in water purification. The paper also provides an overview of synthetic methods for producing endophyte-nanoparticle composites to optimize their remediation capabilities in aqueous environments. The final section of the review highlights the constraints related to integrating endophytes with nanoparticles.

Recent advances in environmental and agricultural applications of hydrochars: A review

Hydrochar is a carbonaceous material that is generated through the process of hydrothermal carbonization (HTC) from biomass, which has garnered considerable attention in recent years owing to its potential applications in a diverse range of fields, such as environmental remediation and agriculture. Hydrochar is produced from a diverse range of biomass waste materials and retains exceptional properties, including high carbon content, stability, and surface area, making it an optimal candidate for various enviro-agricultural applications. Moreover, it delves into the production process of hydrochar, with explicit emphasis on the optimization of certain properties during the production of hydrochar from bio-waste. Furthermore, the potential of hydrochar as an adsorbent and catalyst support for heavy metals and dyes was extensively explored, along with a soil remediation potential that can improve the physical, chemical and biological properties of soil. This comprehensive review aims to provide a thorough overview of hydrochar with a particular focus on its production, properties, and prospective applications. The significance of hydrochar is accentuated and the growing need for alternative sources of energy and materials that are environmentally sustainable is highlighted in this paper. Besides, the consequence of hydrochar on soil properties such as water-holding capacity, nutrient retention, and total soil porosity, as well as its influence on soil chemical properties such as cation exchange capacity, electrical conductivity, and surface functionality is scrutinized.

Phytoremediation mechanism and role of plant growth promoting rhizobacteria in weed plants for eco-restoration of hazardous industrial waste polluted site: a review

Plants have numerous strategies for phytoremediation depending upon the characteristic of pollutants. Plant growth promoting rhizobacteria (PGPR) are essential to the process of phytoremediation and play a key part in it. The mechanism of PGPR for phytoremediation is mediated by two methods; under the direct method there is phytohormone production, nitrogen fixation, nutrient mineral solubilization, and siderophore production while the indirect method includes quorum quenching, antibiosis, production of lytic enzyme, biofilm formation, and hydrogen cyanide production. Due to their economic and environmental viability, most researchers have recently concentrated on the potential of weed plants for phytoremediation. Although weed plants are considered unwanted and noxious, they have a high growth rate and adaptability which opens a high scope for its role in phytoremediation of contaminated site. The interaction of plant with rhizobacteria starts from root exudates containing various organic acids and peptides which act as nutrients essential for colonization and siderophore production by the rhizospheric bacteria. The rhizobacteria, while colonizing, tend to promote plant growth and health either directly by providing phytohormones and minerals or indirectly by suppressing growth of possible phytopathogens. Recently, several weed plants have been reported for phytoextraction of heavy metals (Ni, Pb, Zn, Hg, Cd, Cu, As, Fe, and Cr) contaminants from various agro-based industries. These potential native weed plants have high prospect of eco-restoration of polluted site with complex organo-metallic waste for sustainable development.

Beyond methane, new frontiers in anaerobic microbial hydrocarbon utilizing pathways

Alkanes, single carbon methane to long-chain hydrocarbons (e.g. hexadecane and tetradecane), are important carbon sources to anaerobic microbial communities. In anoxic environments, archaea are known to utilize and produce methane via the methyl-coenzyme M reductase enzyme (MCR). Recent explorations of new environments, like deep sea sediments, that have coupled metagenomics and cultivation experiments revealed divergent MCRs, also referred to as alkyl-coenzyme M reductases (ACRs) in archaea, with similar mechanisms as the C1 utilizing canonical MCR mechanism. These ACR enzymes have been shown to activate other alkanes such as ethane, propane and butane for subsequent degradation. The reversibility of canonical MCRs suggests that these non-methane-activating homologues (ACRs) might have similar reversibility, perhaps mediated by undiscovered lineages that produce alkanes under certain conditions. The discovery of these alternative alkane utilization pathways holds significant promise for a breadth of potential biotechnological applications in bioremediation, energy production and climate change mitigation.

Bio-stimulating effect of endophytic Aspergillus flavus AUMC 16068 and its respective ex-polysaccharides in lead stress tolerance of Triticum aestivum plant

Heavy metal accumulation is one of the major agronomic challenges that has seriously threatened food safety. As a result, metal-induced phytotoxicity concerns require quick and urgent action to retain and maintain the physiological activities of microorganisms, the nitrogen pool of soils, and the continuous yields of wheat in a constantly worsening environment. The current study was conducted to evaluate the plant growth-promoting endophytic Aspergillus flavus AUMC 16,068 and its EPS for improvement of plant growth, phytoremediation capacity, and physiological consequences on wheat plants (Triticum aestivum) under lead stress. After 60 days of planting, the heading stage of wheat plants, data on growth metrics, physiological properties, minerals content, and lead content in wheat root, shoot, and grains were recorded. Results evoked that lead pollution reduced wheat plants' physiological traits as well as growth at all lead stress concentrations; however, inoculation with lead tolerant endophytic A. flavus AUMC 16,068 and its respective EPS alleviated the detrimental impact of lead on the plants and promoted the growth and physiological characteristics of wheat in lead-contaminated conditions and also lowering oxidative stress through decreasing (CAT, POD, and MDA), in contrast to plants growing in the un-inoculated lead polluted dealings. In conclusion, endophytic A. flavus AUMC 16,068 spores and its EPS are regarded as eco-friendly, safe, and powerful inducers of wheat plants versus contamination with heavy metals, with a view of protecting plant, soil, and human health.

Omics technology draws a comprehensive heavy metal resistance strategy in bacteria

The rapid industrial revolution significantly increased heavy metal pollution, becoming a major global environmental concern. This pollution is considered as one of the most harmful and toxic threats to all environmental components (air, soil, water, animals, and plants until reaching to human). Therefore, scientists try to find a promising and eco-friendly technique to solve this problem i.e., bacterial bioremediation. Various heavy metal resistance mechanisms were reported. Omics technologies can significantly improve our understanding of heavy metal resistant bacteria and their communities. They are a potent tool for investigating the adaptation processes of microbes in severe conditions. These omics methods provide unique benefits for investigating metabolic alterations, microbial diversity, and mechanisms of resistance of individual strains or communities to harsh conditions. Starting with genome sequencing which provides us with complete and comprehensive insight into the resistance mechanism of heavy metal resistant bacteria. Moreover, genome sequencing facilitates the opportunities to identify specific metal resistance genes, operons, and regulatory elements in the genomes of individual bacteria, understand the genetic mechanisms and variations responsible for heavy metal resistance within and between bacterial species in addition to the transcriptome, proteome that obtain the real expressed genes. Moreover, at the community level, metagenome, meta transcriptome and meta proteome participate in understanding the microbial interactive network potentially novel metabolic pathways, enzymes and gene species can all be found using these methods. This review presents the state of the art and anticipated developments in the use of omics technologies in the investigation of microbes used for heavy metal bioremediation.

Recent advances in alginate-based composite gel spheres for removal of heavy metals

The discharge of heavy metal ions from industrial wastewater into natural water bodies is a consequence of global industrialisation. Due to their high toxicity and resistance to degradation, these heavy metal ions pose a substantial threat to human health as they accumulate and amplify. Alginate-based composite gels exhibit good adsorption and mechanical properties, excellent biodegradability, and non-toxicity, making them environmentally friendly heavy metal ion adsorbents for water with promising development prospects. This paper introduces the basic properties, cross-linking methods, synthetic approaches, modification methods, and manufacturing techniques of alginate-based composite gels. The adsorption properties and mechanical strength of these gels can be enhanced through surface modification, multi-component mixing, and embedding. The main production processes involved are sol-gel and cross-linking methods. Additionally, this paper reviews various applications of alginate composite gels for common heavy metals, rare earth elements, and radionuclides and elucidates the adsorption mechanism of alginate composite gels. This study aimed to provide a reference for synthesising new, efficient, and environmentally friendly alginate-based adsorbents and to contribute new ideas and directions for addressing the issue of heavy metal pollution.

Effects of Streptomyces sp. HU2014 inoculation on wheat growth and rhizosphere microbial diversity under hexavalent chromium stress

Wheat (Triticum aestivum L.) is a major foodstuff for over 40% of the world's population. However, hexavalent chromium [Cr(VI)] in contaminated soil significantly affects wheat production and its ecological environment. Streptomyces sp. HU2014 was first used to investigate the effects of Cr (VI) stress on wheat growth. We analyzed the Cr(VI) concentration, physicochemical properties of wheat and soil, total Cr content, and microbial community structures during their interactions. HU2014 reduced the toxicity of Cr(VI) and promoted wheat growth by increasing total nitrogen, nitrate nitrogen, total phosphorus, and Olsen-phosphorus in Cr(VI)-contaminated soil. These four soil variables had strong positive effects on two bacterial taxa, Proteobacteria and Bacteroidota, in the HU2014 treatments. In addition, the level of the dominant Proteobacteria positively correlated with the total Cr content in the soil. Among the fungal communities, which had weaker correlations with soil variables compared with bacterial communities, Ascomycota was the most abundant. Our findings suggest that HU2014 can promote the phytoremediation of Cr(VI)-contaminated soil.

A critical review on the ecotoxicity of heavy metal on multispecies in global context: A bibliometric analysis

Heavy metals (HMs) have become a significant concern in the current era, with deleterious effects on diverse living organisms when exposed beyond threshold concentrations. Both nature and human beings have been constantly casting out HMs into environmental matrices through various activities. Innumerable cases of threatened diseases such as cancer, respiratory ailments, reproductive defects, skin diseases, and several others have been a cause of significant concern for humans as the number of instances has been increasing with each decade. HMs migrates via several pathways to infiltrate biological organisms and amass within them. Even though numerous treatment approaches are available for remediating HM pollution, however, they are expensive, along with other setbacks. Due to such constraints, combating HM contamination requires environmentally conscious strategies like bioremediation, which employs an array of biological systems to remove HMs from the environment. Nonetheless, to address the current global HM pollution situation, it is critical to comprehend not only how these hazardous HMs cause toxicity in various living organisms but also the knowledge gaps that currently exist concerning the subject of HM ecotoxicity. In the present investigation, data was extracted from Google Scholar using software program called Harzing's Publish or Perish. The collected information has been subsequently displayed as a network file using the VOSViewer software tool. Thus, the current review presents a significant insight with the inclusion of a readily accessible bibliometric analysis to comprehend the present status of HMs research, global research trends, existing knowledge discrepancies, and research challenges. Further, it also provides an in-depth review of HMs ecotoxicity, with a focus on arsenic (As), cadmium (Cd), and lead (Pb). Thus, as indicated by the bibliometric study, the present review will assist future investigators studying HMs ecotoxicity by providing baseline data concerning a wide range of living organisms and by addressing research gaps.

Introducing bio-indicator fish of the Persian Gulf based on health risk assessment of 27 commercial species

BACKGROUND

The increasing consumption of seafood may bring health risks. It will be especially important for the people living along the coasts who are highly dependent on seafood for food and income.

METHODS

In this research, a comprehensive health risk assessment was performed on 27 species of high-consumption commercial fish sampled from stations located in Hormozgan province within the Northeast Persian Gulf. Concentrations of trace metals and their health risk were investigated.

RESULTS

Spatial distribution of trace metals in commercial fish showed central stations including Kong and Greater Tonb have higher concentrations of all trace metals except Pb. Some metals showed a significant correlation between concentrations. Our finding indicated the average concentration of all trace metals except Ni in all species was below the concentrations proposed by WHO/FAO/USEPA. EDI for all metals in all species in both adult and child age groups was lower than its RfD (oral reference dose of trace metal) showing the daily consumption of these fish does not pose any health risk and implicates seafood consumption guidelines or policies. Values of THQ for each metal and HI for all metals were lower than 1 in all commercial fish indicating the lack of non-cancerous health risk through the long-term consumption of these fish. The research found potential health risks associated with the consumption of these fish, specifically related to the metals Cr, Ni, and Cd.

CONCLUSION

In total, health risk indices proposed eight fish as bio-indicator species of the Persian Gulf. The findings emphasize the risk management of commercial fish consumption, especially bio-indicator species, in Hormozgan province, the Northeast Persian Gulf.

Unlocking the potential of biochar: an iron-phosphorus-based composite modified adsorbent for adsorption of Pb(II) and Cd(II) in aqueous environments and response surface optimization of adsorption conditions

In this work, iron-phosphorus based composite biochar (FPBC) was prepared by modification with potassium phosphate and iron oxides for the removal of heavy metal ions from single and mixed heavy metal (Pb and Cd) solutions. FTIR and XPS characterization experiments showed that the novel modified biochar had a greater number of surface functional groups compared to the pristine biochar. The maximum adsorption capacities of FPBC for Pb(II) and Cd(II) were 211.66 mg·g-1 and 94.08 mg·g-1 at 293 K. The adsorption of Pb(II) and Cd(II) by FPBC followed the proposed two-step adsorption kinetic model and the Freundlich isothermal adsorption model, suggesting that the mechanism of adsorption of Pb(II) and Cd(II) by FPBC involved chemical adsorption of multiple layers. Mechanistic studies showed that the introduction of -PO4 and -PO3 chemisorbed with Pb(II) and Cd(II), and the introduction of -Fe-O increased the ion exchange with Pb(II) and Cd(II) during the adsorption process and produced precipitates such as Pb3Fe(PO4)3 and Cd5Fe2(P2O7)4. Additionally, the abundant -OH and -COOH groups also participated in the removal of Pb(II) and Cd(II). In addition, FPBC demonstrated strong selective adsorption of Pb(II) in mixed heavy metal solutions. The Response Surface Methodology(RSM) analysis determined the optimal adsorption conditions for FPBC as pH 5.31, temperature 26.01 °C, and Pb(II) concentration 306.30 mg·L-1 for Pb(II). Similarly, the optimal adsorption conditions for Cd(II) were found to be pH 5.66, temperature 39.34 °C, and Cd(II) concentration 267.68 mg·L-1. Therefore, FPBC has the potential for application as a composite-modified adsorbent for the adsorption of multiple heavy metal ions.

Effect of Ba2+ on the biomineralization of Ca2+ and Mg2+ ions induced by Bacillus licheniformis

The effect of barium ions on the biomineralization of calcium and magnesium ions is often overlooked when utilizing microbial-induced carbonate precipitation technology for removing barium, calcium, and magnesium ions from oilfield wastewater. In this study, Bacillus licheniformis was used to bio-precipitate calcium, magnesium, and barium ions. The effects of barium ions on the physiological and biochemical characteristics of bacteria, as well as the components of extracellular polymers and mineral characteristics, were also studied in systems containing coexisting barium, calcium, and magnesium ions. The results show that the increasing concentrations of barium ions decreased pH, carbonic anhydrase activity, and concentrations of bicarbonate and carbonate ions, while it increased the contents of humic acids, proteins, polysaccharides, and DNA in extracellular polymers in the systems containing all three types of ions. With increasing concentrations of barium ions, the content of magnesium within magnesium-rich calcite and the size of minerals precipitated decreased, while the full width at half maximum of magnesium-rich calcite, the content of O-C=O and N-C=O, and the diversity of protein secondary structures in the minerals increased in systems containing all three coexisting ions. Barium ions does inhibit the precipitation of calcium and magnesium ions, but the immobilized bacteria can mitigate the inhibitory effect. The precipitation ratios of calcium, magnesium, and barium ions reached 81-94%, 68-82%, and 90-97%. This research provides insights into the formation of barium-enriched carbonate minerals and offers improvements for treating oilfield wastewater.

The Diversity and Community Composition of Three Plants' Rhizosphere Fungi in Kaolin Mining Areas

Mining activities in the kaolin mining area have led to the disruption of the ecological health of the mining area and nearby soils, but the effects on the fungal communities in the rhizosphere soils of the plants are not clear. Three common plants (Conyza bonariensis, Artemisia annua, and Dodonaea viscosa) in kaolin mining areas were selected and analyzed their rhizosphere soil fungal communities using ITS sequencing. The alpha diversity indices (Chao1, Shannon, Simpson, observed-species, pielou-e) of the fungal communities decreased to different extents in different plants compared to the non-kauri mining area. The β-diversity (PCoA, NMDS) analysis showed that the rhizosphere soil fungal communities of the three plants in the kaolin mine area were significantly differentiated from those of the control plants grown in the non-kaolin mine area, and the extent of this differentiation varied among the plants. The analysis of fungal community composition showed that the dominant fungi in the rhizosphere fungi of C. bonariensis and A. annua changed, with an increase in the proportion of Mycosphaerella (genus) by about 20% in C. bonariensis and A. annua. An increase in the proportion of Didymella (genus) by 40% in D. viscosa was observed. At the same time, three plant rhizosphere soils were affected by kaolin mining activities with the appearance of new fungal genera Ochrocladosporium and Plenodomus. Predictive functional potential analysis of the samples revealed that a significant decrease in the potential of functions such as biosynthesis and glycolysis occurred in the rhizosphere fungal communities of kaolin-mined plants compared to non-kaolin-mined areas. The results show that heavy metals and plant species are the key factors influencing these changes, which suggests that selecting plants that can bring more abundant fungi can adapt to heavy metal contamination to restore soil ecology in the kaolin mining area.

Promoting sustainable agriculture by exploiting plant growth-promoting rhizobacteria (PGPR) to improve maize and cowpea crops

Maize and cowpea are among the staple foods most consumed by most of the African population, and are of significant importance in food security, crop diversification, biodiversity preservation, and livelihoods. In order to satisfy the growing demand for agricultural products, fertilizers and pesticides have been extensively used to increase yields and protect plants against pathogens. However, the excessive use of these chemicals has harmful consequences on the environment and also on public health. These include soil acidification, loss of biodiversity, groundwater pollution, reduced soil fertility, contamination of crops by heavy metals, etc. Therefore, essential to find alternatives to promote sustainable agriculture and ensure the food and well-being of the people. Among these alternatives, agricultural techniques that offer sustainable, environmentally friendly solutions that reduce or eliminate the excessive use of agricultural inputs are increasingly attracting the attention of researchers. One such alternative is the use of beneficial soil microorganisms such as plant growth-promoting rhizobacteria (PGPR). PGPR provides a variety of ecological services and can play an essential role as crop yield enhancers and biological control agents. They can promote root development in plants, increasing their capacity to absorb water and nutrients from the soil, increase stress tolerance, reduce disease and promote root development. Previous research has highlighted the benefits of using PGPRs to increase agricultural productivity. A thorough understanding of the mechanisms of action of PGPRs and their exploitation as biofertilizers would present a promising prospect for increasing agricultural production, particularly in maize and cowpea, and for ensuring sustainable and prosperous agriculture, while contributing to food security and reducing the impact of chemical fertilizers and pesticides on the environment. Looking ahead, PGPR research should continue to deepen our understanding of these microorganisms and their impact on crops, with a view to constantly improving sustainable agricultural practices. On the other hand, farmers and agricultural industry players need to be made aware of the benefits of PGPRs and encouraged to adopt them to promote sustainable agricultural practices.

Molecular identification of Proteus mirabilis, Vibrio species leading to CRISPR-Cas9 modification of tcpA and UreC genes causing cholera and UTI

Heavy metal accumulation increases rapidly in the environment due to anthropogenic activities and industrialization. The leather and surgical industry produces many contaminants containing heavy metals. Cadmium, a prominent contaminant, is linked to severe health risks, notably kidney and liver damage, especially among individuals exposed to contaminated wastewater. This study aims to leverage the natural cadmium resistance mechanisms in bacteria for bioaccumulation purposes. The industrial wastewater samples, characterized by an alarming cadmium concentration of 29.6 ppm, 52 ppm, and 76.4 ppm-far exceeding the recommended limit of 0.003 ppm-were subjected to screening for cadmium-resistant bacteria using cadmium-supplemented media with CdCl2. 16S rRNA characterization identified Vibrio cholerae and Proteus mirabilis as cadmium-resistant bacteria in the collected samples. Subsequently, the cadmium resistance-associated cadA gene was successfully amplified in Vibrio species and Proteus mirabilis, revealing a product size of 623 bp. Further analysis of the identified bacteria included the examination of virulent genes, specifically the tcpA gene (472 bp) associated with cholera and the UreC gene (317 bp) linked to urinary tract infections. To enhance the bioaccumulation of cadmium, the study proposes the potential suppression of virulent gene expression through in-silico gene-editing tools such as CRISPR-Cas9. A total of 27 gRNAs were generated for UreC, with five selected for expression. Similarly, 42 gRNA sequences were generated for tcpA, with eight chosen for expression analysis. The selected gRNAs were integrated into the lentiCRISPR v2 expression vector. This strategic approach aims to facilitate precise gene editing of disease-causing genes (tcpA and UreC) within the bacterial genome. In conclusion, this study underscores the potential utility of Vibrio species and Proteus mirabilis as effective candidates for the removal of cadmium from industrial wastewater, offering insights for future environmental remediation strategies.

Preparation and characterization of P-type zeolite for adsorption of Cr3+, Ni2+, and Co2

Acid-washed coal fly ash (AW-CFA) was subjected to wet grinding activation followed by hydrothermal crystallization to synthesize P zeolite (FAZ-P). The FAZ-P obtained at 120 °C for 24 h exhibited a maximum relative crystallinity of 93.15% and was employed for the adsorption of Cr3+, Ni2+, and Co2+ from aqueous solutions. The zeolitization of coal fly ash (CFA) leads to an increase in specific surface area to 44.00 m2/g, resulting in the formation of nano-sized P zeolite crystals with uniformly narrow fissures and sizes within the range of 10-30 nm. Adsorption experimental results indicate that FAZ-P exhibits maximum adsorption capacities of 49.03 mg/g for Cr3+, 22.20 mg/g for Ni2+, and 27.25 mg/g for Co2+. The adsorption equilibrium data for both mixed and single-metal ion solutions conform to the Langmuir model, with the affinity sequence for heavy metal ions being Cr3+  > Co2+  > Ni2+. The pseudo-first-order and pseudo-second-order kinetic models effectively described the adsorption behavior of Cr3+, Ni2+, and Co2+. Increasing the initial pH value of the solution significantly enhanced the adsorption capacity of the adsorbent for heavy metal ions. The removal mechanism of metal ions involves both adsorption and ion exchange processes. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic.

Mitigation strategies for heavy metal toxicity and its negative effects on soil and plants

Heavy metal pollution threatens food security by accumulating in crops and soils, posing a significant challenge to modern agriculture due to its high toxicity. Urgent action is needed to restore affected agricultural fields. An efficient way to remove toxins is by bioremediation, which uses microorganisms. With the purpose of restoring soil in agriculture, this research attempts to assemble a consortium of microorganisms isolated from techno-genic soil. A number of promising strains, including Pseudomonas putida, Pantoea sp., Pseudomonas aeruginosa, Klebsiella oxytoca, and Agrobacterium tumefaciens were chosen based on their capacity to eliminate heavy metals from tests. Heavy metal removal (Cd, Hg, As, Pb, and Ni) and phytohormone production have been shown to be effective using consortiums (Pseudomonas aeruginosa, Klebsiella oxytoca, and Agrobacterium tumefaciens in a 1:1:2). In instances with mixed heavy-metal contamination, aeruginosa demonstrated efficacy because of its notable ability to absorb substantial quantities of heavy metals. The capacity of the cooperation to improve phytoremediation was investigated, with an emphasis on soil cleanup in agricultural areas. When combined with Sorghum bicolor L., it was able to remove roughly 16% As, 14% Hg, 32% Ni, 26% Cd, and 33% Pb from the soil.

Toxic metal contamination effects mediated by hotspot intensity of soil enzymes and microbial community structure

Metal contamination from mine waste is a widespread threat to soil health. Understanding of the effects of toxic metals from mine waste on the spatial patterning of rhizosphere enzymes and the rhizosphere microbiome remains elusive. Using zymography and high-throughput sequencing, we conducted a mesocosm experiment with mine-contaminated soil, to compare the effects of different concentrations of toxic metals on exoenzyme kinetics, microbial communities, and maize growth. The negative effects of toxic metals exerted their effects largely on enzymatic hotspots in the rhizosphere zone, affecting both resistance and the area of hotspots. This study thus revealed the key importance of such hotspots in overall changes in soil enzymatic activity under metal toxicity. Statistical and functional guild analysis suggested that these enzymatic changes and associated microbial community changes were involved in the inhibition of maize growth. Keystone species of bacteria displayed negative correlations with toxic metals and positive correlations with the activity of enzymatic hotspots, suggesting a potential role. This study contributes to an emerging paradigm, that changes both in the activity of soil enzymes and soil biota - whether due to substrate addition or in this case toxicity - are largely confined to enzymatic hotspot areas.

Biosorption of nickel and cadmium using Pachira aquatica Aubl. peel biochar

This study aimed to assess the value of Pachira aquatica Aubl. fruit peels by exploring their applicability in the biosorption process for the removal of Ni(II) and Cd(II) metal ions. The Pachira aquatica Aubl. fruit peel biochar (PAB) was extensively characterized through various techniques, including proximate analysis, helium pycnometer, XRD, SEM, point of zero charge determination, zeta potential measurement, and Boehm titration. Subsequently, kinetic, isotherm, and thermodynamic batch biosorption studies were conducted, followed by column biosorption tests. The characteristics of PAB, including low moisture content, a neutral point of zero charge, porosity, an irregular and heterogeneous structure, a negatively charged surface, and the presence of functional groups, indicate its remarkable capacity for efficiently binding with heavy metals. Biosorption equilibrium time was achieved at 300 min for both ions, fitting well with a pseudo second-order kinetic model and Langmuir isotherm model. These data suggest that the biosorption process occurred chemically in monolayer. The column C presented an exhaust volume of 1200 mL for Ni(II) and 1080 for Cd(II) and removal of 98% and 99% of removal for Ni(II) and Cd(II), respectively. In summary, PAB demonstrates substantial potential as a biosorbent for effectively removing heavy metals, making a valuable contribution to the valorization of this co-product and the mitigation of environmental pollution.

A review of remediation technologies for uranium-contaminated water

Uranium is a naturally existing radioactive element present in the Earth's crust. It exhibits lithophilic characteristics, indicating its tendency to be located near the surface of the Earth and tightly bound to oxygen. It is ecotoxic, hence the need for its removal from the aqueous environment. This paper focuses on the variety of water treatment processes for the removal of uranium from water and this includes physical (membrane separation, adsorption and electrocoagulation), chemical (ion exchange, photocatalysis and persulfate reduction), and biological (bio-reduction and biosorption) approaches. It was observed that membrane filtration and ion exchange are the most popular and promising processes for this application. Membrane processes have high throughput but with the challenge of high power requirements and fouling. Besides high pH sensitivity, ion exchange does not have any major challenges related to its application. Several other unique observations were derived from this review. Chitosan/Chlorella pyrenoidosa composite adsorbent bearing phosphate ligand, hydroxyapatite aerogel and MXene/graphene oxide composite has shown super-adsorbent performance (>1000 mg/g uptake capacity) for uranium. Ultrafiltration (UF) membranes, reverse osmosis (RO) membranes and electrocoagulation have been observed not to go below 97% uranium removal/conversion efficiency for most cases reported in the literature. Heat persulfate reduction has been explored quite recently and shown to achieve as high as 86% uranium reduction efficiency. We anticipate that future studies would explore hybrid processes (which are any combinations of multiple conventional techniques) to solve various aspects of the process design and performance challenges.

Competition of Cd(II) and Pb(II) on the bacterial cells: a new insight from bioaccumulation based on NanoSIMS imaging

Polymetallic exposure causes complex toxicity to microorganisms. In this study, we investigated the responses of Escherichia coli under co-existence of cadmium (Cd) and lead (Pb), primarily based on biochemical analysis and RNA sequencing. Cd completely inhibited bacterial growth at a concentration of 2.41 mmol/L, with its removal rate as low as <10%. In contrast, the Pb removal rate was >95% under equimolar sole Pb stress. In addition, the Raman analysis confirmed the loss of proteins for the bacterial cells. Under the co-existence of Cd and Pb, the Cd toxicity to E. coli was alleviated. Meanwhile, the biosorption of Pb cations was more intense during the competitive sorption with Cd. Transmission electron microscopy images showed that a few cells were elongated during incubation, i.e., the average cellular length increased from 1.535 ± 0.407 to 1.845 ± 0.620 µm. Moreover, NanoSIMS imaging showed that the intracellular distribution of Cd and Pb was coupled with sulfur. Genes regulating sulfate transporter were also upregulated to promote sulfate assimilation. Then, the subsequent production of biogenic sulfide and sulfur-containing amino acids was enhanced. Although this strategy based on S enrichment could resist the polymetallic stress, not all related genes were induced to upregulate under sole Cd stress. Therefore, the S metabolism might remodel the microbial resistance to variable occurrence of heavy metals. Furthermore, the competitive sorption (in contrast to sole Cd stress) could prevent microbial cells from strong Cd toxicity.IMPORTANCEMicrobial tolerance and resistance to heavy metals have been widely studied under stress of single metals. However, the polymetallic exposure seems to prevail in the environment. Though microbial resistance can alleviate the effects of exogenous stress, the taxonomic or functional response to polymetallic exposure is still not fully understood. We determined the strong cytotoxicity of cadmium (Cd) on growth, and cell elongation would be driven by Cd stress. The addition of appropriate lead (Pb) showed a stimulating effect on microbial bioactivity. Meanwhile, the biosorption of Pb was more intense during co-existence of Pb and Cd. Our work also revealed the spatial coupling of intracellular S and Cd/Pb. In particular, the S assimilation was promoted by Pb stress. This work elucidated the microbial responses to polymetallic exposure and may provide new insights into the antagonistic function during metal stresses.

Screening of cadmium-chromium-tolerant strains and synergistic remediation of heavy metal-contaminated soil using king grass combined with highly efficient microbial strains

The present study involved the isolation of two cadmium (Cd) and chromium (Cr) resistant strains, identified as Staphylococcus cohnii L1-N1 and Bacillus cereus CKN12, from heavy metal contaminated soils. S. cohnii L1-N1 exhibited a reduction of 24.4 % in Cr6+ and an adsorption rate of 6.43 % for Cd over a period of 5 days. These results were achieved under optimal conditions of pH (7.0), temperature (35 °C), shaking speed (200 rpm), and inoculum volume (8 %). B. cereus strain CKN12 exhibited complete reduction of Cr6+ within a span of 48 h, while it demonstrated a 57.3 % adsorption capacity for Cd over a period of 120 h. These results were achieved under conditions of optimal pH (8.0), temperature (40 °C), shaking speed (150 rpm), and inoculum volume (2-3 %). Additionally, microcharacterization and ICP-MS analysis revealed that Cr and Cd were accumulated on the cell surface, whereas Cr6+ was mainly reduced extracellularly. Subsequently, a series of pot experiments were conducted to provide evidence that the inclusion of S. cohnii L1-N1 or B. cereus CKN12 into the system resulted in a notable enhancement in both the plant height and biomass of king grass. In particular, it was observed that the presence of S. cohnii L1-N1 or B. cereus CKN12 in king grass led to a significant reduction in the levels of Cd and Cr in the soils (36.0 % and 27.8 %, or 72.9 % and 47.4 %, respectively). Thus, the results of this study indicate that the combined use of two bacterial strains can effectively aid in the remediation of tropical soils contaminated with moderate to light levels of Cd and Cr.

Biological roles of soil microbial consortium on promoting safe crop production in heavy metal(loid) contaminated soil: A systematic review

Heavy metal(loid) (HM) pollution of agricultural soils is a growing global environmental concern that affects planetary health. Numerous studies have shown that soil microbial consortia can inhibit the accumulation of HMs in crops. However, our current understanding of the effects and mechanisms of inhibition is fragmented. In this review, we summarise extant studies and knowledge to provide a comprehensive view of HM toxicity on crop growth and development at the biological, cellular and the molecular levels. In a meta-analysis, we find that microbial consortia can improve crop resistance and reduce HM uptake, which in turn promotes healthy crop growth, demonstrating that microbial consortia are more effective than single microorganisms. We then review three main mechanisms by which microbial consortia reduce the toxicity of HMs to crops and inhibit HMs accumulation in crops: 1) reducing the bioavailability of HMs in soil (e.g. biosorption, bioaccumulation and biotransformation); 2) improving crop resistance to HMs (e.g. facilitating the absorption of nutrients); and 3) synergistic effects between microorganisms. Finally, we discuss the prospects of microbial consortium applications in simultaneous crop safety production and soil remediation, indicating that they play a key role in sustainable agricultural development, and conclude by identifying research challenges and future directions for the microbial consortium to promote safe crop production.

Combined Proteomic and Metabolomic Analyses Reveal the Comprehensive Regulation of Stropharia rugosoannulata Mycelia Exposed to Cadmium Stress

The potential of Stropharia rugosoannulata as a microbial remediation material for cadmium (Cd)-contaminated soil lies in its capacity to absorb and accumulate Cd in its mycelia. This study utilized the TMT and LC-MS techniques to conduct integrated proteomic and metabolomic analyses with the aim of investigating the mycelial response mechanisms of S. rugosoannulata under low- and high-Cd stresses. The results revealed that mycelia employed a proactive defense mechanism to maintain their physiological functions, leading to reduced sensitivity to low-Cd stress. The ability of mycelia to withstand high levels of Cd stress was influenced primarily by the comprehensive regulation of six metabolic pathways, which led to a harmonious balance between nitrogen and carbohydrate metabolism and to reductions in oxidative stress and growth inhibition caused by Cd. The results provide valuable insights into the molecular mechanisms involved in the response of S. rugosoannulata mycelia to Cd stress.

Seed-Borne Bacterial Diversity of Fescue (Festuca ovina L.) and Properties Study

Rich endophytic bacterial communities exist in fescue (Festuca ovina L.) and play an important role in fescue growth, cold tolerance, drought tolerance and antibiotic tolerance. To screen for probiotics carried by fescue seeds, seven varieties were collected from three different regions of China for isolation by the milled seed method and analyzed for diversity and motility, biofilm and antibiotic resistance. A total of 91 bacterial isolates were obtained, and based on morphological characteristics, 36 representative dominant strains were selected for 16S rDNA sequencing analysis. The results showed that the 36 bacterial strains belonged to four phyla and nine genera. The Firmicutes was the dominant phylum, and Bacillus, Paenibacillus and Pseudomonas were the dominant genera. Most of the strains had motility (80%) and were biofilm-forming (91.7%). In this study, 15 strains were capable of Indole-3-acetic acid (IAA) production, 24 strains were capable of nitrogen fixation, and some strains possessed amylase and protease activities, suggesting their potential for growth promotion. Determination of the minimum inhibitory concentration (MIC) against the bacteria showed that the strains were not resistant to tetracycline and oxytetracycline. Pantoea (QY6, LH4, MS2) and Curtobacterium (YY4) showed resistance to five antibiotics (ampicillin, kanamycin, erythromycin, sulfadiazine and rifampicin). Using Pearson correlation analysis, a significant correlation was found between motility and biofilm, and between biofilm and sulfadiazine. In this study, we screened two strains of Pantoea (QY6, LH4) with excellent growth-promoting ability as well as broad-spectrum antibiotic resistance. which provided new perspectives for subsequent studies on the strong ecological adaptations of fescue, and mycorrhizal resources for endophytic bacteria and plant interactions.

Inoculation of cadmium-tolerant bacteria to regulate microbial activity and key bacterial population in cadmium-contaminated soils during bioremediation

The perennial ryegrass Lolium perenne can be used in conjunction with cadmium (Cd)-tolerant bacteria such as Cdq4-2 (Enterococcus spp.) for bioremediation of Cd-contaminated soil. In this study, a theoretical basis was provided to increase the efficiency of L. perenne remediation of Cd-contaminated soil using microorganisms to maintain the stability of the soil microbiome. The experimental design involved three treatment groups: CK (soil without Cd addition) as the control, 20 mg·kg-1 Cd-contaminated soil, and 20 mg·kg-1 Cd-contaminated soil + Cdq4-2, all planted with L. perenne. The soil was collected on day 60 to determine the soil microbial activity and bacterial community structure and to analyze the correlation between soil variables, the bacterial community, available Cd content in the soil, Cd accumulation, and L. perenne growth. The soil microbial activity and bacterial community diversity decreased under Cd stress, and the soil microbial community composition was changed; while inoculation with Cdq4-2 significantly increased soil basal respiration and the activities of urease, invertase, and fluorescein diacetate (FDA) hydrolase by 83.65%, 79.72%, 19.88%, and 96.15% respectively; and the stability of the community structure was also enhanced. The Actinobacteriota biomass, the amount of available Cd, and the above- and belowground Cd content of L. perenne were significantly negatively correlated with the total phosphorus, total potassium, and pH. The activity of urease, invertase, and FDA hydrolase were significantly positively correlated with the biomasses of Acidobacteriota and L. perenne and significantly negatively correlated with the Chloroflexi biomass. Further, the available soil Cd content and the above- and belowground Cd levels of L. perenne were significantly positively correlated with the Actinobacteriota biomass and significantly negatively correlated with the Gemmatimonadetes biomass. Overall, inoculating Cd-tolerant bacteria improved the microbial activity, diversity, and abundance, and changed the microbial community composition, facilitating the remediation of Cd-contaminated soil by L. perenne.

Soil rare microorganisms mediated the plant cadmium uptake: The central role of protists

Plants and microorganisms symbiotically mediate and/or catalyse the turnover of elements in rhizosphere soils, thus directly influencing the effectiveness of phytoremediation in addressing heavy metal contamination. Soil rare microbial communities are diverse but not well understood in terms of their importance for phytoremediation. In this study, we simulated the loss of rare microorganisms through dilution-to-extinction approach, and investigated the effects on integrated rhizosphere microbiome with soil microcosm experiments, including bacteria, fungi, protists, and microfauna. Additionally, we explored the implications for ryegrass (Lolium multiflorum Lam.) growth and its uptake of Cd (cadmium). Compared with the undiluted group, ryegrass exhibited a significant decrease in Cd uptake ranging from 52.34 % to 73.71 % in the rare species-loss soils, indicating a lack of functional redundancy in rhizosphere soil microbial community following rare species loss. Interestingly, these soils displayed a remarkable 1.79-fold increase in plant biomass and a 41.02 % increase in plant height. By sequencing the 16S, 18S, and ITS rRNA gene amplicons of rhizosphere microbes, we found that soil rare species loss decreased the rhizosphere microbial α-diversity, changed the community structures, and shifted the functional potential. Protists were particularly affected. Through the analysis of species co-occurrence networks, along with the partial least squares path modeling, we found that the diversity of protists and bacteria and the co-occurring network connectivity of protists and fungi contributed most to plant Cd uptake and growth. These results highlighted the potential significance of rare microorganisms, particularly protists, in phytoextraction of Cd-contaminated soils, owing to their central role in the microbial food web.

Occurrence, distribution, source apportionment, ecological and health risk assessment of heavy metals in water, sediment, fish and prawn from Ojo River in Lagos, Nigeria

The study investigates the occurrence and bioaccumulation of heavy metals in water, sediment, fish, and prawn from the Ojo River with a view to identify the source of origin and the associated ecological and human health risks. The result shows that heavy metal concentrations in water [As = 0.010, Cd = 0.001, Cr = 0.041, Cu = 0.019, Co = 0.050, Fe = 0.099, Pb = 0.006, Ni = 0.003, and Zn = 0.452(mg/L)] were within the acceptable limits. The heavy metals in the sediment [As = 0.050, Cd = 0.287, Cr = 0.509, Cu = 0.207, Co = 0.086, Fe = 33.093, Pb = 0.548, Ni = 0.153 and Zn = 4.249 (mg/kg)] were within their respective background levels or earth's crust and the TEL and PEL standard limits. The bioaccumulation of heavy metals in fish and prawn tissues are in this hierarchical form: Fe > Zn > Cu > Cr > Ni > Co > Pb > Ar > Cd and Fe > Zn > Cu > Cr > Pb > Ar > Ni > Co > Cd, respectively. The bioaccumulation factors of heavy metals in fish ranged from 0.893 - 16.611 and 1.056 - 49.204 in prawn, which were higher than the biota-sedimentation factors (BSAF) values, inferring that the fish and prawns of this study ingested heavy metals highly from water column. The aggregated BSAF scores (fish = 5.584 and prawn = 9.137) showed that these organisms are good concentrators of heavy metals in sediments. The water quality index and other pollution indices (Single pollution index, Heavy metal assessment index, and Heavy metal pollution index) demonstrates slightly clean water, with a moderate level of contamination. The HI values of heavy metals in water, fish, and prawn were lower than 1, implying non-carcinogenic risk in children or adults. The ADD and EDI values of the metals were within their respective oral reference doses (RfD). The TCR values showed that exposure to water, either by ingestion or dermal absorption and the consumption of P. obscura and M. vollenhovenii from the Ojo River would not induce cancer risks in people, though As, Cr, Cd, and Pb showed carcinogenic potentials. The sediment contamination indices such as CF, mCd, EF, and Igeo showed a moderate level of pollution. The ecological risk values (NMPI, mCd = 0.068, PLI = 0.016, and R.I = 86.651) of heavy metals implies "no-moderate risk" except for Cd, which showed high risk. The ecotoxicological parameters,  m-PEL-Q (0.024) and m-ERM-Q (0.016) denotes low contamination and no probability of acute toxicity. The CV analysis showed high dispersions and variabilities in the distributions of the heavy metals in water. Other source analyses (Pearson's correlation matrix, PCA, and HCA) showed that both natural processes and anthropogenic activities are responsible for the occurrence of heavy metals in water and sediment from the Ojo River.

A review of heavy metal risks around e-waste sites and comparable municipal dumpsites in major African cities: Recommendations and future perspectives

In Africa, the effects of informal e-waste recycling on the environment are escalating. It is regularly transported from developed to developing nations, where it is disassembled informally in search of precious metals, thus increasing human exposure to harmful compounds. Africa has a serious problem with e-waste, as there are significant facilities in Ghana and Nigeria where imported e-waste is unsafely dismantled. however, because they are in high demand and less expensive than new ones, old electronic and electrical items are imported in large quantities, just like in many developing nations. After that, these objects are frequently scavenged to recover important metals through heating, burning, incubation in acids, and other techniques. Serious health hazards are associated with these activities for workers and individuals close to recycling plants. At e-waste sites in Africa, there have been documented instances of elevated concentrations of hazardous elements, persistent organic pollutants, and heavy metals in dust, soils, and vegetation, including plants consumed as food. Individuals who handle and dispose of e-waste are exposed to highly hazardous chemical substances. This paper examines heavy metal risks around e-waste sites and comparable municipal dumpsites in major African cities. Elevated concentrations of these heavy metals metal in downstream aquatic and marine habitats have resulted in additional environmental impacts. These effects have been associated with unfavourable outcomes in marine ecosystems, such as reduced fish stocks characterized by smaller sizes, increased susceptibility to illness, and decreased population densities. The evidence from the examined studies shows how much e-waste affects human health and the environment in Africa. Sub-Saharan African nations require a regulatory framework that includes specialized laws, facilities, and procedures for the safe recycling and disposal of e-waste.

Exploring the molecular and toxicological mechanism associated with interactions between heavy metals and the reproductive system of Mytilus galloprovincialis

A large number of heavy metals resulted toxic to the reproductive system, but invertebrate infertility has been poorly explored, and above all, there are limited molecular, cellular and toxicological studies. In the present work, we exposed Mytilus galloprovincialis to three individual metal chlorides (CuCl2 15 μM, CdCl2 1.5 μM, NiCl2 15 μM) and their mixture for 24 h, to evaluate the effects on the protamine-like proteins (PLs), sperm DNA and on their interaction in the formation of sperm chromatin. Under all exposure conditions, but particularly after exposure to the metals mix, relevant changes in the electrophoretic pattern, by AU-PAGE and SDS-PAGE, and in fluorescence spectroscopy measurements of PLs were shown. In addition, alterations in DNA binding of these proteins were observed by Electrophoretic Mobility Shift Assay (EMSA) and through their release from sperm nuclei. Moreover, there was evidence of increased accessibility of micrococcal nuclease to sperm chromatin, which was also confirmed by toluidine blue staining. Furthermore, morphological analyses indicated severe gonadal impairments which was also corroborated by increased PARP expression, by Western blotting, and sperm DNA fragmentation, by comet assay. Finally, we investigated the expression of stress genes, gst, hsp70 and mt10, in gonadal tissue. The latter investigations also showed that exposure to this metals mix was more harmful than exposure to the individual metals tested. The present results suggest that these metals and in particular their mixture could have a negative impact on the reproductive fitness of M. galloprovincialis. Based on these evidences, we propose a molecular mechanism.

Plummeting toxic contaminates from water through phycoremediation: Mechanism, influencing factors and future outlook to enhance the capacity of living and non-living algae

Freshwater habitats hold a unique role in the survival of all living organisms and supply water for drinking, irrigation, and life support activities. In recent decades, due to anthropogenic activities, deterioration in the water quality has been a long-lasting problem and challenge to the scientific fraternity. Although, these freshwater bodies have a bearable intrinsic capacity for pollution load however alarming increase in pollution limits the intrinsic capacities and requires additional technological interventions. The release of secondary pollutants from conventional interventions further needs revisiting the existing methodologies and asking for green interventions. Green interventions such as phycoremediation are natural, eco-friendly, economic, and energy-efficient alternatives and provide additional benefits such as nutrient recovery, biofuel production, and valuable secondary metabolites from polluted freshwater bodies. This systemic review in a nut-shell comprises the recent research insights on phycoremediation, technological implications, and influencing factors, and further discusses the associated mechanisms of metal ions biosorption by living and non-living algae, its advantages, and limitations. Besides, the article explores the possibility of future research prospects for applicability at a field scale that will help in the efficient utilization of resources, and improved ecological and health risks.

Biosorption of lead ion by lactic acid bacteria and the application in wastewater

Through the study of biosorption of Pb2+ by lactic acid bacteria, two strains called CN-011 and CN-005 with high tolerance and great adsorption to lead were screened. The minimum bactericidal concentration of lead ions for both CN-011 and CN-005 was 1.45 mmol/L. The optimal culture conditions for the removal of 30 mg/L lead ions were achieved by culturing lactic acid bacteria at an initial pH of 7.0, 37 °C and 120 rpm for 48 h. The adsorption rate of CN-011 and CN-005 for Pb2+ were 85.95% and 86.78%, respectively. In simulated wastewater samples, the average adsorption rate of Pb2+ was 73.38% for CN-011 and 74.15% for CN-005. The mechanism of biosorption was characterized by Fourier Transform infrared spectroscopy, Scanning Electron Microscope-Energy Dispersive Spectrometer, X-ray Photoelectron Spectroscopy, which revealed that Pb2+ mainly reacted with hydroxyl ions in peptidoglycan or polysaccharide, and carboxylate radical in teichoic acid or protein on the surface of lactic acid bacteria cell wall. The deposits produced on the bacterial surface were identified as lead oxide and lead nitrate.

Metal-non-tolerant ecotypes of ectomycorrhizal fungi can protect plants from cadmium pollution

The application of mycorrhizal fungi as a bioaugmentation technology for phytoremediation of heavy metal (HM) contaminated soil has attracted widespread attention. In order to explore whether the adaptation of Pinus massoniana (P. massoniana) to metal polluted soil depends on the metal adaptation potential of their associated ectomycorrhizal fungi (ECMF), we evaluated the cadmium (Cd) tolerance of 10 ecotypes of Cenococcum geophilum (C. geophilum) through a membership function method, and P. massoniana seedlings were not (NM) or inoculated by Cd non-tolerant type (JaCg144), low-tolerant (JaCg32, JaCg151) and high-tolerant (JaCg205) isolates of C. geophilum were exposed to 0 and 100 mg·kg-1 for 3 months. The result showed that, each ecotype of C. geophilum significantly promoted the growth, photosynthesis and chlorophyll content, proline (Pro) content and the activity of peroxidase (POD) of P. massoniana seedlings, and decreased malonaldehyde (MDA) content and catalase (CAT) and superoxide dismutase (SOD) activity. The comprehensive evaluation D value of the tolerance to Cd stress showed that the order of the displaced Cd resistance of the four ecotypic mycorrhizal P. massoniana was: JaCg144 > JaCg151 > JaCg32 > JaCg205. Pearson correlation analysis showed that the Sig. value of the comprehensive evaluation (D) values of the strains and mycorrhizal seedlings was 0.077 > 0.05, indicating that the Cd tolerance of the the C. geophilum isolates did not affect its regulatory effect on the Cd tolerance of the host plant. JaCg144 and JaCg151 which are non-tolerant and low-tolerant ecotype significantly increased the Cd content in the shoots and roots by about 136.64-181.75% and 153.75-162.35%, indicating that JaCg144 and JaCg151 were able to effectively increase the enrichment of Cd from the soil to the root. Transcriptome results confirmed that C. geophilum increased the P. massoniana tolerance to Cd stress through promoting antioxidant enzyme activity, photosynthesis, and lipid and carbohydrate synthesis metabolism. The present study suggests that mental-non-tolerant ecotypes of ECMF can protect plants from Cd pollution, providing more feasible strategies for ectomycorrhizal-assisted phytoremediation.

Bioaugmentation and phytoremediation wastewater treatment process as a viable alternative for pesticides removal: case of pentachlorophenol

This study focused on the potential for pentachlorophenol removal by a biological process in secondary treated wastewater (STWW). The proposed process is a combined method of phytoremediation using a native plant, Polypogon maritimus and Lemna minor, and bioaugmentation using a fungus. The bioaugmentation process was performed by a fungal isolate capable of removing PCP, isolated from the compost. The identification of the fungus was performed by morphological, biochemical, and molecular methods. A biological treatment system by bioaugmentation and phytoremediation was set up to estimate the capacity of this process to eliminate a high concentration of PCP. physico-chemical parameters, such as pH, COD, and BOD were tested at experimentation times T0 (initial) and Tf (final). The concentration of PCP is controlled by the HPLC method. Thus, the growth of the fungus was determined by spectrophotometry and enumeration on the agar medium. The results obtained show that the isolated and selected fungus is identified by Penicillium Ilerdanum. The fungal strain used has a significant capacity for tolerance and elimination of PCP. The results of the physico-chemical parameters showed an improvement in the quality of wastewater after the treatment was carried out. The elimination of PCP came with a release of Common law- and an important decrease in the DOC value in the STWW. The results obtained show that the Polypogon treatment shows a significant elimination of PCP by a percentage of the order of 92.01% and 23.58 g. L- 1 chloride concentration. The macrophytes used showed a better ability to tolerate and eliminate PCP with an increase of chlorophyll and its longer sheets.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40201-023-00865-y.

Impact of soil treatment with Nitrilo Triacetic Acid (NTA) on Cd fractionation and microbial biomass in cultivated and uncultivated calcareous soil

Purpose

The aim of this study was to evaluate the effectiveness of nitrilotriacetic acid (NTA) on cadmium (Cd) fractions and microbial biomass in a calcareous soil spiked with Cd under cultivated (Zea mays L.) and uncultivated regime subject to soil leaching condition. Expanding investigations related to soil-plant interactions on metal-contaminated soils with insights on microbial activity and associated soil toxicity perspective provides novel perspectives on using metal-chelating agents for soil remediation.

Methods

The experimental factors were three levels of Cd contamination (0, 25, and 50 mg kg-1 soil) and three levels of NTA (0, 15, and 30 mmol L-1) in loamy soil under maize-cultured and non-cultured conditions. During the experiment, the adding NTA and leaching processes were performed three times.

Results

The results showed that the amount of leached Cd decreased in cultivated soil compared to uncultivated soil due to partial uptake of soluble Cd by plant roots and changes in Cd fractions in soil, so that Cd leached in Cd50NTA30 was 9.2 and 6.1 mg L-1, respectively, in uncultivated and cultivated soils. Also, Cd leached in Cd25NTA30 was 5.7 and 3.1 mg L-1 respectively, in uncultivated and cultivated soils. The best treatment in terms of chemical and microbial characteristics of the soil with the high percentage of Cd removed from the soil was Cd25NTA30 in cultivated soil. In Cd25NTA30 compared to Cd25NTA0 in cultivated soil, pH (0.25 unit), microbial biomass carbon (MBC, 65.0 mg kg-1), and soil respiration (27.5 mg C-CO2 kg-1 24 h-1) decreased, while metabolic quotient (qCO2, 0.05) and dissolved organic carbon (DOC, 20.0 mg L-1) increased. Moreover, the changes of Cd fractions in Cd25NTA30 in cultivated soil compared to uncultivated soil were as follows; the exchangeable Cd (F1, 0.27 mg kg-1) and Fe/Mn-oxide-bounded Cd (F4, 0.15 mg kg-1) fractions increased, in contrast, carbonate-Cd (F2, 2.67 mg kg-1) and, organically bounded Cd (F3, 0.06 mg kg-1) fractions decreased. NTA had no significant effect on the residual fraction (F5).

Conclusion

The use of NTA, especially in calcareous soils, where most of the Cd is bound to calcium carbonate, was able to successfully convert insoluble fractions of Cd into soluble forms and increase the removal efficiency of Cd in the phytoremediation method. NTA is a non-toxic chelating agent to improve the accumulation of Cd in maize.

Mycoremediation of lead and cadmium by lignocellulosic enzymes of Pleurotus eryngii

This study aimed to investigate the ability of Pleurotus eryngii fungus to absorb lead and cadmium from industrial wastewater. After culturing the fungus on a potato dextrose agar (PDA) medium containing 0 (control), 150 mg L-1, 250 mg L-1, and 350 mg L-1 concentrations of lead and cademium for 30 days, the mycelia were isolated from the culture medium and their extracts were used to measure protein content and the activity of antioxidant enzymes. Also, heavy metal contents were analyzed by atomic absorption spectrometry using flame photometry. Results showed that the growth of mycelia was significantly affected by different concentrations of the two heavy metals. High tolerance of heavy metal pollution in the culture media and the ability to accumulate lead and cademium confirmed that Pleurotus eryngii is a favorable option for mycoremediation. Also, molecular studies for fungal sequencing were investigated using the trench method, the sequence of the fungus was recorded in the gene bank, and finally the fungus was identified in the study.

Capillary and Electrodynamic Forces-Driven Separation Detection of Metal Ions Using a Disposable Microfluidic Sensor with a Composite Electrode

A disposable microfluidic channel sensor printed on a plastic platform was developed to analyze heavy metal ions (HMIs) as a model target species. Precise separation and detection of multiple targets were established by symmetrically applying a small AC potential on the carbon channel walls to induce an electrodynamic force. The separation device was constructed by covering it with a plastic lid to achieve capillary action in the channel. The sample flow rate was regulated by the hydrophilicity of the lid plastic and electrodynamic convection by the AC field, which was characterized by the contact angle measurement and the additional electrodynamic force. The flow variables and their relevance to the capillary phenomena were demonstrated, and the analytical parameters were optimized. The working electrode was modified with poly(diamino terthiophene) anchored with nanosized graphene oxide (pDATT/GO) to enhance the detection performance. The experimental variables for separating and detecting the target species were optimized according to the AC frequency and amplitude, sample flow rate, electrolytes, pH, temperature, and applied potential for detection. The linear dynamic ranges were between 0.1 and 200.0 ppb, with detection limits of 0.04 ± 0.023, 0.29 ± 0.05, 0.07 ± 0.011, and 0.14 ± 0.06 ppb for Cu2+ Cd2+, Hg2+, and Pb2+, respectively. Finally, the reliability of the proposed method was evaluated through analysis of HMIs in real water samples. The results were matched to those obtained through parallel analysis using ICP-MS at a 95% confidence level.