Polycyclic Aromatic Hydrocarbons in Sediments/Soils of the Rapidly Urbanized Lower Reaches of the River Chaohu, China

Ecological and human health impact assessments based on long-term monitoring of soil PAHs near a coal-fired power plant

The combustion of coal in power plants releases significant amounts of polycyclic aromatic hydrocarbons (PAHs), which are highly toxic and carcinogenic. This study assesses the ecological and human health impacts of PAHs contamination from a coal-fired power plant over 8 years. The monitoring site selection considered the distance from the power plant and the prevailing wind direction in the investigated area. The results reveal that, during the monitoring period, PAH levels increased on average by 43%, 61%, and 37% in the zone of the prevailing wind direction, in the area proximate to the power plant, and the zone distant from it, respectively. The site, which has a radius of 4.5 km in the prevailing wind direction, exhibited the highest ecological and human health impacts. Additionally, a strong correlation was observed between environmental and human health impacts, depending on the distance from the power plant, particularly in areas with the prevailing wind direction. These insights contribute to a comprehensive understanding of the intricate dynamics linking power plant emissions, PAHs contamination, and their far-reaching consequences on the environment and human health.

Risk assessment and biodegradation potential of PAHs originating from Map Ta Phut Industrial Estate, Rayong, Thailand

Petroleum hydrocarbon contamination is a serious concern across the globe. Here, the capability of native bacterial consortium enriched from sediment samples of Map Ta Phut Industrial Estate (MTPIE), Rayong, Thailand was described. The distribution of PAHs was assessed from the sediment samples collected from MTPIE by GC-FID and the toxic unit (TU) was calculated to assess the potential ecological risk to the surrounding biota. This study investigated the degradation potential and determined the PAH-degrading bacterial cultures by enriching collected sediments in PAHs mixtures (naphthalene, phenanthrene, and pyrene). The TPH degradation capacity of each bacterial consortium was validated in a soil microcosm using aged crude oil-contaminated soil. The MTPIE sediments were highly contaminated with PAHs (843.99-3904.39 ng g-1) and posed extremely high ecological risks to benthic biota (TU > 1). The consortium S5-P most significantly removed naphthalene (90.03%) and phenanthrene (88.14%) while the highest removal of pyrene was achieved by the S3-P consortium. Other consortia only partially degraded the PAHs. The dominant microbes in the consortia were determined using PCR-DGGE, it was found that the PAH degrading consortia were known PAH degraders such as Annwoodia, Bacillus, Brevibacillus, Lysinibacillus, Paracoccus, Rhodococcus, Sphingopyxis, Sulfurovum, and Sulfurimonas species and unknown PAH degraders such as Lithuaxuella species. The consortium S5-P showed the highest degradation capacity, removing 74.99% of TPHs in the soil microcosm. Furthermore, the inoculation of PAH-biodegrading bacterial consortia significantly promoted the catechol-2,3-dioxygenase (C23O) and dehydrogenase (DHA) activities which directly correlated with the degradation efficiency of petroleum hydrocarbons (p < 0.05).

The remediation of polycyclic aromatic hydrocarbon contaminated soil by immobilized microorganisms using distiller's grains

Polycyclic aromatic hydrocarbons are a persistent organic pollutant, and their biodegradation in the soil is often limited due to the limited degradation ability of indigenous bacteria and the low activity of exogenous PAH degrading bacteria. Immobilized microbial technology can protect microorganisms from the impact of harsh environments, and distiller's grains have the potential as carriers for microbial immobilization. This study aims to use distiller's grains as a microbial carrier, investigate the feasibility of immobilized microorganisms using distiller's grains for remediation of PAH contaminated soil; explore the relationship between soil nutrient content, consumption, and PAH degradation rate; and reveal the mechanism of bioremediation from the perspective of soil enzyme activity and microbial community composition. The results showed that after 72 days of remediation, the removal rates of phenanthrene and pyrene in the treatment of immobilized microorganisms in distiller grains reached 91.78% and 58.59%, respectively. Distiller grains can serve as a carrier for microorganisms, providing them with shelter and nutrients to enhance their chance of survival. Additionally, they can regulate the composition of soil particles and improve aeration, thereby increasing the efficiency of PAH degradation in soil.

Microalgae mediated bioremediation of polycyclic aromatic hydrocarbons: Strategies, advancement and regulations

Polycyclic aromatic hydrocarbons (PAHs) are pervasive in the atmosphere and are one of the emerging pollutants that cause harmful effects in living systems. There are some natural and anthropogenic sources that can produce PAHs in an uncontrolled way. Several health hazards associated with PAHs like abnormality in the reproductive system, endocrine system as well as immune system have been explained. The mutagenic or carcinogenic effects of hydrocarbons in living systems including algae, vertebrates and invertebrates have been discussed. For controlling PAHs, biodegradation has been suggested as an effective and eco-friendly process. Microalgae-based biosorption and biodegradation resulted in the removal of toxic contaminants. Microalgae both in unialgal form and in consortium (with bacteria or fungi) performed good results in bioaccumulation and biodegradation. In the present review, we highlighted the general information about the PAHs, conventional versus advanced technology for removal. In addition microalgae based removal and toxicity is discussed. Furthermore this work provides an idea on modern scientific applications like genetic and metabolic engineering, nanomaterials-based technologies, artificial neural network (ANN), machine learning (ML) etc. As rapid and effective methods for bioremediation of PAHs. With several pros and cons, biological treatments using microalgae are found to be better for PAH removal than any other conventional technologies.

Hazards of polycyclic aromatic hydrocarbons: a review on occurrence, detection, and role of green nanomaterials on the removal of PAH from the water environment

Organic pollutant contamination in the environment is a serious and dangerous issue, especially for developing countries. Among all organic pollutants, polycyclic aromatic hydrocarbons (PAHs) are the more frequently discovered ones in the environment. PAH contamination is caused chiefly by anthropogenic sources, such as the disposal of residential and industrial waste and automobile air emissions. They are gaining interest due to their environmental persistence, toxicity, and probable bioaccumulation. The existence of PAHs may result in damage to the environment and living things, and there is widespread concern about the acute and chronic threats posed by the release of these contaminants. The detection and elimination of PAHs from wastewater have been the focus of numerous technological developments during recent decades. The development of sensitive and economical monitoring systems for detecting these substances has attracted a lot of scientific attention. Using several nanomaterials and nanocomposites is a promising treatment option for the identification and elimination of PAHs in aquatic ecosystems. This review elaborated on the sources of origin, pathogenicity, and widespread occurrence of PAHs. In addition, the paper highlighted the use of nanomaterial-based sensors in detecting PAHs from contaminated sites and nanomaterial-based absorbents in PAH elimination from wastewater. This review also addresses the development of Graphene and Biofunctionalized nanomaterials for the elimination of PAHs from the contaminated sites.

Microbiome based approaches for the degradation of polycyclic aromatic hydrocarbons (PAHs): A current perception

Globally, polycyclic aromatic hydrocarbons (PAHs) pollution is primarily driven by their release into the air through various combustion processes, including burning fossil fuels such as coal, oil, and gas in motor vehicles, power plants, and industries, as well as burning organic matter like wood, tobacco, and food in fireplaces, cigarettes, and grills. Apart from anthropogenic pollution sources, PAHs also occur naturally in crude oil, and their potential release during oil extraction, refining processes, and combustion further contributes to contamination and pollution concerns. PAHs are resistant and persistent in the environment because of their inherent features, viz., heterocyclic aromatic ring configurations, hydrophobicity, and thermostability. A wide range of microorganisms have been found to be effective degraders of these recalcitrant contaminants. The presence of hydrocarbons as a result of numerous anthropogenic activities is one of the primary environmental concerns. PAHs are found in soil, water, and the air, making them ubiquitous in nature. The presence of PAHs in the environment creates a problem, as their presence has a detrimental effect on humans and animals. For a variety of life forms, PAH pollutants are reported to be toxic, carcinogenic, mutation-inducing, teratogenic, and immune toxicogenics. Degradation of PAHs via biological activity is an extensively used approach in which diverse microorganisms (fungal, algal, clitellate, and protozoan) and plant species and their derived composites are utilized as biocatalysts and biosurfactants. Some microbes have the ability to transform and degrade these PAHs, allowing them to be removed from the environment. The goal of this review is to provide a critical overview of the existing understanding of PAH biodegradation. It also examines current advances in diverse methodologies for PAH degradation in order to shed light on fundamental challenges and future potential.

Soil physiochemical properties and bacterial community changes under long-term polycyclic aromatic hydrocarbon stress in situ steel plant soils

In situ soils were collected at two depths in Jinan and Hangzhou steel plants, which both have a long history of operation and polycyclic aromatic hydrocarbons (PAHs) contamination. The richness of 16 S rRNA gene and bacterial community of the soil were determined by real-time PCR and high-throughput sequencing. Soil physicochemical properties, PAHs contamination characteristics, and their interrelationships were also analyzed. In general, the PAHs contamination decreased with increasing soil depths. The physicochemical properties and PAH concentration of soil had synergistic impacts on the composition of the bacterial community. The long-term higher PAHs stress in Hangzhou contaminated soil (982 mg kg^-1) increased the bacterial abundance and diversity, while that of Jinan contaminated soil (63 mg kg^-1) decreased bacterial abundance and diversity. The pH value, sand content of the soil were positively correlated (P < 0.05) with the bacterial diversity including Simpson, Shannon, Observed_species and Chao1 indexes., and the other soil properties exhibited negative correlations with different strengths. The abundances of Curvibacter, Pseudomonas, Thiobacillus, Lysobacter, and Limnobacter were positively correlated with the PAHs concentration (P < 0.01). Additionally, the network structure of the PAHs-contaminated soils was more complex compared to that of uncontaminated soils, with stronger linkages and correlations between the different bacteria. These findings provide a theoretical basis for microbial remediation of PAHs-polluted soil.

The distribution, sources and health risk of polycyclic aromatic hydrocarbons (PAHs) in sediments of Liujiang River Basin: A field study in typical karstic river

The accumulation of PAHs in sediments of Liujiang River Basin were investigated to disclose the sources, input processes and toxicity risk of PAHs in a typical karstic river. The results revealed the concentrations of ∑₁₅PAHs are ranging from 111.97 to 593.39 ng/g, most of which are centralized in upstream and midstream of Liujiang River. Positive Matrix Factorization identified PAHs are mainly from the mixed combustion of oil and coal, biomass combustion and oil products leaking. Redundancy analysis manifested mixed accumulation should be the main approach of PAHs that inputting sediment. The values of RQ_NCs and RQ_MPCs suggested the moderate contamination of PAHs. The higher HQ and ILCR indicated the ingestion of PAHs are the main way to impact public health, while children should be more susceptible to PAHs. The values of HQ and ILCR indicated the overall low non-carcinogenic risk of PAHs, but relatively high carcinogenic risk of PAHs.

Biotransformation as a tool for remediation of polycyclic aromatic hydrocarbons from polluted environment - review on toxicity and treatment technologies

Polycyclic aromatic hydrocarbons, a prominent family of persistent organic molecules produced by both anthropogenic and natural processes, are widespread in terrestrial and aquatic environments owing to their hydrophobicity, electrochemical stability and low aqueous solubility. Phenanthrene and naphthalene belong to the group of polycyclic aromatic hydrocarbons whose occurrence are reported to be relatively higher. The bioremediation mode of removing the toxicities of these two compounds has been reported to be promising than other methods. Most of the microbial classes of bacterial, fungal and algal origin are reported to degrade the target pollutants into non-toxic compounds effectively. The review aims to give an overview on toxicological studies, identification and enrichment techniques of phenanthrene and naphthalene degrading microbes and the bioremediation technologies (microbial assisted reactors, microbial fuel cells and microbial assisted constructed wetlands) reported by various researchers. All the three modes of bioremediation techniques were proved to be promising on different perspectives. In the treatment of phenanthrene, a maximum recovery of 96% and 98% was achieved in an aerobic membrane reactor with Bacillus species and single chamber air cathode microbial fuel cell with Acidovorax and Aquamicrobium respectively were reported. With the constructed wetland configuration, 95.5% of removal was attained with manganese oxide based microbial constructed wetland. The maximum degradation efficiency reported for naphthalene are 99% in a reverse membrane bioreactor, 98.5% in a marine sediment microbial fuel cell and 92.8% with a low-cost sandy soil constructed wetland.

Effect of sorption properties on the content, ecotoxicity, and bioaccumulation of polycyclic aromatic hydrocarbons (PAHs) in bottom sediments

Polycyclic aromatic hydrocarbons (PAHs) tend to accumulate in the sediment due to their high hydrophobicity. Despite PAHs have been the subject of several reviews, PAH sorption processes in bottom sediments has not been comprehensively discucorrelation coefficients between sorption parameters and contessed. Understanding the dependencies governing PAH sorption processes will allow to predict, monitor, and mitigate the ecological effects of PAH contamination and the associated risks to humans or wildlife. The objectives of the study were to assess the relationship between the sorption properties and the content of PAHs in bottom sediments and mussels. The PAH profile was dominated by higher-molecular hydrocarbons, which accounted for 73% of the total concentration of PAHs. Potentiometric studies revealed the steric-based PAH sorption mechanism that strongly depended on the presence of negatively dissociating structures such as carboxylic or phenolic functional groups. Based on the changes in Q8 values, the size-exclusion effect was more likely for 5- and 6-ring compounds. Pores < 5 µm, which had the largest share in the specific surface area, were the preferred sites for PAH sequestration and stabilization in bottom sediments. The availability of PAHs was reduced in sediments with high organic matter content. The PAH bioaccumulation factor significantly decreased with increasing TOC content in sediments. Higher mortality and growth inhibition of H. incongruens were observed in samples with high and medium TOC contents than in those with low TOC content.

Polycyclic aromatic hydrocarbons (PAHs): Updated aspects of their determination, kinetics in the human body, and toxicity

Polycyclic aromatic hydrocarbons (PAHs) are legacy pollutants of considerable public health concern. Polycyclic aromatic hydrocarbons arise from natural and anthropogenic sources and are ubiquitously present in the environment. Several PAHs are highly toxic to humans with associated carcinogenic and mutagenic properties. Further, more severe harmful effects on human- and environmental health have been attributed to the presence of high molecular weight (HMW) PAHs, that is PAHs with molecular mass greater than 300 Da. However, more research has been conducted using low molecular weight (LMW) PAHs). In addition, no HMW PAHs are on the priority pollutants list of the United States Environmental Protection Agency (US EPA), which is limited to only 16 PAHs. However, limited analytical methodologies for separating and determining HMW PAHs and their potential isomers and lack of readily available commercial standards make research with these compounds challenging. Since most of the PAH kinetic data originate from animal studies, our understanding of the effects of PAHs on humans is still minimal. In addition, current knowledge of toxic effects after exposure to PAHs may be underrepresented since most investigations focused on exposure to a single PAH. Currently, information on PAH mixtures is limited. Thus, this review aims to critically assess the current knowledge of PAH chemical properties, their kinetic disposition, and toxicity to humans. Further, future research needs to improve and provide the missing information and minimize PAH exposure to humans.

Biochar application for remediation of organic toxic pollutants in contaminated soils; An update

Bioremediation of organic contaminants has become a major environmental concern in the last few years, due to its bio-resistance and potential to accumulate in the environment. The use of diverse technologies, involving chemical and physical principles, and passive uptake utilizing sorption using ecofriendly substrates have drawn a lot of interest. Biochar has got attention mainly due to its simplicity of manufacturing, treatment, and disposal, as it is a less expensive and more efficient material, and has a lot of potential for the remediation of organic contaminants. This review highlighted the adverse impact of persistent organic pollutants on the environment and soil biota. The utilization of biochar to remediate soil and contaminated compounds i.e., pesticides, polycyclic aromatic hydrocarbons, antibiotics, and organic dyes has also been discussed. The soil application of biochar has a significant impact on the biodegradation, leaching, and sorption/desorption of organic contaminants. The sorption/desorption of organic contaminants is influenced by chemical composition and structure, porosity, surface area, pH, and elemental ratios, and surface functional groups of biochar. All the above biochar characteristics depend on the type of feedstock and pyrolysis conditions. However, the concentration and nature of organic pollutants significantly alters the sorption capability of biochar. Therefore, the physicochemical properties of biochar and soils/wastewater, and the nature of organic contaminants, should be evaluated before biochar application to soil and wastewater. Future initiatives, however, are needed to develop biochars with better adsorption capacity, and long-term sustainability for use in the xenobiotic/organic contaminant remediation strategy.

Impact of COVID-19 lockdown and health risk modeling of polycyclic aromatic hydrocarbons in Onne, Nigeria

The people living in Onne are highly vulnerable to PAH exposure due to constant exposure to black soot through oral, dermal, and inhalation routes. This work aims to determine the PAHs profile of selected soils in Onne, to determine the health risks associated with PAHs exposure through the soil, and to determine the impact of reduced industrial and other activities on the PAHs profile and associated public health risks. This study evaluated 16 priority polycyclic aromatic hydrocarbon (PAHs) pollutants in soil samples from the four (4) major clans in Onne using a gas chromatography flame ionization detector (GC-FID) during and after the COVID-19 lockdown. The results showed a differential presence of PAHs during and after the lockdown. Of the 16 priority PAHs, 10 and 8 PAHs were respectively detected during and after the COVID-19 lockdown. High molecular weight PAHs such as benzo(k)fluoranthene and benzo(a)anthracene were major contributors during the lockdown, while low molecular weight PAHs such as naphthalene, acenaphthylene, and fluorene were present at higher levels after the lockdown. An assessment of health risk by incremental lifetime cancer risks revealed that the entire population of Onne might be at risk of cancer development across periods, though a higher risk was presented during the lockdown. In addition, children under the age of 18 may be at greater risk. To the best of our knowledge, there is no previous report on the impact of the COVID-19 lockdown on soil PAH profile and health risks, with particular attention to the Onne industrial host community. Earlier work considered the ecological risks of heavy metals on dumpsites in Onne. Taken together, the PAH-contaminated soil in Onne poses an immediate health concern. Therefore, reduced anthropological activities, as evident during the COVID-19 lockdown, may play a role in exposure and cancer risk reduction. While there may not be another lockdown due to the challenging impacts associated with a physical lockdown, firmly controlled economic activity can be a solution if embraced by stakeholders. The COVID-19-lockdown was encumbered with restricted movements and security checks, which limited the number of samples collected. However, the Local Government Council (Department of the Environment) granted permission for the researchers to work with a minimal threat to their lives.

Legacy PAHs in effluent receiving river sediments near a large petroleum products depot in Enugu, Nigeria: Human health risks and economic cost of pollution

This study assessed the human health risk of exposure to legacy PAHs in the Nwaenebo River sediments that received effluents for over two decades from the Nigeria National Petroleum Corporation (NNPC) petroleum product Depot in Emene, Enugu, Nigeria. The study went further to estimate economic costs of the sediment PAHs pollution based on the human health risk of exposure. The human health risks were determined by estimating carcinogenic and mutagenic risks via Benzo[a]pyrene total potential equivalent (BaP TPE) and mutagenic equivalent quotient (MEQ). The economic costs of the sediment pollution comprised costs due to mortality and those due to morbidity and were estimated using the value of statistical lives (VSLs) and cost of illness (CoI), respectively. The study, with an appropriate selection of sampling points established that the NNPC petroleum Depot was responsible for the Nwaenebo River sediment PAHs pollution with ƩPAHs concentration 14.3-163 mg/kg. The carcinogenic and mutagenic risks varied from 1.3*10^-5 to 4.7*10^-5 and 1.4*10^-5 to 6.0*10^-5 respectively. Based on risk threshold of 10^-6, these risks were high. The long term economic costs of pollution of the sediments by the PAHs were estimated at 60.5 million USD and 0.46 million USD for mortality and morbidity costs, respectively.

Structural characteristics of sediment humins from South Korean lakes and their phenanthrene binding compared to other carbon sources

Sediment humins are extremely important for binding hydrophobic organic contaminants in rivers and lakes. Nonetheless, little is known about their structure and binding. We, therefore, examined the structure and phenanthrene sorption affinity of sediment humin samples upstream, midstream, and downstream from two artificial lakes in South Korea by using the elemental ¹³C-NMR analysis, Freundlich model, and Langmuir model. The characteristics and phenanthrene sorption affinity of sediment humins were also compared with those of sediment humic acids from similar origins as well as soil humins/humic acids in South Korea from previous studies by using principal component analysis. In both lakes, downstream sediment humins exhibited lower N/C, O/C, and (N + O)/C ratios, lower internal oxidation, and higher aliphaticity due to the presence of long-chain aliphatic compounds generated during anaerobic decomposition. The principal component analysis results also showed that C,H-alkyl, O-alkyl, and polar organic carbon contents were significantly different when comparing the up-mid stream and downstream sediment samples in Daecheong Lake. In addition, midstream sediment humin in Andong Lake presented higher C,H-alkyl and lower polar organic carbon contents compared to those of up-downstream samples. In both lakes, the sorption coefficient and adsorption isotherm linearity were positively correlated with the C,H-alkyl content and negatively correlated with the O-aryl content. Similar to C,H-alkyl and POC, C,H-alkyl, and (N + O)/C had an extremely high correlation coefficient when predicting the sorption coefficient (Freundlich model) and the maximum adsorption capacity (Langmuir model) of sediment humins. Sediment humins had higher C,H-alkyl contents and lower sorption coefficients than those of sediment humic acids and soil humins/humic acids. These findings provide key information for monitoring water quality and polycyclic aromatic hydrocarbon contamination in South Korean lake sediments.

Key role of suspended particulate matter in assessing fate and risk of endocrine disrupting compounds in a complex river-lake system

Endocrine-disrupting compounds (EDCs) enter lakes mainly through river inflow. However, the occurrence, transport and fate of EDCs in the overlying water, suspended particulate matter (SPM) and sediment of inflowing rivers remain unclear. This study investigated the load of seven EDCs in a complex river-lake system of the Taihu Lake Basin during different seasons, with the aims of revealing the transport routes of EDCs and identifying the contributions from different sources. The results indicated that the levels of the seven EDCs in the wet season with high temperature and dilution effects were generally lower than those in the other seasons. EDC enrichment in the sediment was largely affected by the transport and fate of SPM. Moreover, the estrogenic activity and risks of EDCs were the highest in SPM. The mass loadings of particulate EDCs carried by SPM were 2.6 times that of overlying water. SPM plays a vital role in the transport and fate of EDCs in complex river-lake systems and thereby deserves more attention. Nonpoint sources, particularly animal husbandry activities and untreated domestic sewage, were the main sources of EDCs, amounting to 61.5% of the total load.

Effects of urbanization on the distribution of polycyclic aromatic hydrocarbons in China's estuarine rivers

Estuarine rivers are the primary medium for transporting pollutants from human activities to the ocean. Polycyclic aromatic hydrocarbons (PAHs) have substantial toxicity and pose a significant risk to ecosystem and human health. However, the influences of urbanization on their distribution, particularly in China where urbanization is occurring rapidly, remain unclear. This study took three coastal economic circles of China as research areas, and investigated PAHs (16 species) in the estuarine river water. 95.9% of the sampling sites demonstrated moderate PAHs pollution and moderate ecological risk. Coal and petroleum combustion was the primary source of PAHs, but the source composition varied among the regions. Air pollution caused by energy emissions, particularly carbon emissions, has a critical and differential effect on PAHs distribution and deposition. With the increasing use of clean energy, PAHs emissions have been gradually reduced, which provides an effective option for PAHs reduction in a rapidly urbanizing coastal region.

Remediation of soils and sediments polluted with polycyclic aromatic hydrocarbons: To immobilize, mobilize, or degrade?

Polycyclic aromatic hydrocarbons (PAHs) are generated due to incomplete burning of organic substances. Use of fossil fuels is the primary anthropogenic cause of PAHs emission in natural settings. Although several PAH compounds exist in the natural environmental setting, only 16 of these compounds are considered priority pollutants. PAHs imposes several health impacts on humans and other living organisms due to their carcinogenic, mutagenic, or teratogenic properties. The specific characteristics of PAHs, such as their high hydrophobicity and low water solubility, influence their active adsorption onto soils and sediments, affecting their bioavailability and subsequent degradation. Therefore, this review first discusses various sources of PAHs, including source identification techniques, bioavailability, and interactions of PAHs with soils and sediments. Then this review addresses the remediation technologies adopted so far of PAHs in soils and sediments using immobilization techniques (capping, stabilization, dredging, and excavation), mobilization techniques (thermal desorption, washing, electrokinetics, and surfactant assisted), and biological degradation techniques. The pros and cons of each technology are discussed. A detailed systematic compilation of eco-friendly approaches used to degrade PAHs, such as phytoremediation, microbial remediation, and emerging hybrid or integrated technologies are reviewed along with case studies and provided prospects for future research.

Influence of polycyclic aromatic hydrocarbon pollution on the diversity and function of bacterial communities in urban wetlands

Human disturbance has become the primary driving factor behind declining urban wetland ecological health due to rapid urbanization. Sediment microbial communities are critical for wetland ecosystem functioning but experience a range of natural and anthropogenic stressors due to rapid urbanization and land use changes, especially in developing countries. Polycyclic aromatic hydrocarbons (PAHs) released into the environment primarily come from anthropogenic sources like industrial activities and traffic emissions. Environmental PAH contamination is accelerating due to rapid urbanization, which also increases potential PAH-related dangers to human health. However, PAHs are widely distributed and not easy to centrally control. Microorganisms are the primary mediators of wetland purification, with most PAH-degrading microorganisms being bacteria. To better understand the influence of PAH contamination on urban wetland microbial communities, bacterial community compositions within sediments of urban wetlands in three land use types were investigated using high-throughput DNA sequencing and bioinformatics analyses. Statistical analyses revealed significant differences in overall microbial compositions among the three land use types, although γ-proteobacteria was the dominant phyla across all samples. Among the potential PAH-degrading bacterial taxa in sediments, Sphingomonas was the most prevalent. The distributions of PAH-degrading taxa were primarily affected by variance in organic compound abundances in addition to various physico-chemical variables, among which high-ring PAH content was a key parameter associated with bacterial distributions, except in the riverine wetlands. Functional inference via phylogenetic investigation of communities by reconstruction of unobserved states (PICRUSt) indicated that 30 of the 43 genes related to PAH metabolism were predicted to be present within the genomes of bacteria among the three land use type. In particular, dioxygenase and dehydrogenase genes involved in PAH degradation were inferred to be prevalent, indicating that the host urban wetlands exhibited strong potential for organic pollutant degradation.

Polycyclic Aromatic Hydrocarbons: Sources, Toxicity, and Remediation Approaches

Polycyclic aromatic hydrocarbons (PAHs) are widespread across the globe mainly due to long-term anthropogenic sources of pollution. The inherent properties of PAHs such as heterocyclic aromatic ring structures, hydrophobicity, and thermostability have made them recalcitrant and highly persistent in the environment. PAH pollutants have been determined to be highly toxic, mutagenic, carcinogenic, teratogenic, and immunotoxicogenic to various life forms. Therefore, this review discusses the primary sources of PAH emissions, exposure routes, and toxic effects on humans, in particular. This review briefly summarizes the physical and chemical PAH remediation approaches such as membrane filtration, soil washing, adsorption, electrokinetic, thermal, oxidation, and photocatalytic treatments. This review provides a detailed systematic compilation of the eco-friendly biological treatment solutions for remediation of PAHs such as microbial remediation approaches using bacteria, archaea, fungi, algae, and co-cultures. In situ and ex situ biological treatments such as land farming, biostimulation, bioaugmentation, phytoremediation, bioreactor, and vermiremediation approaches are discussed in detail, and a summary of the factors affecting and limiting PAH bioremediation is also discussed. An overview of emerging technologies employing multi-process combinatorial treatment approaches is given, and newer concepts on generation of value-added by-products during PAH remediation are highlighted in this review.

Spatiotemporal toxicity assessment of suspended particulate matter (SPM)-bound polycyclic aromatic hydrocarbons (PAHs) in Lake Chaohu, China: Application of a source-based quantitative method

The spatiotemporal associations between the emissions and environmental toxicities of polycyclic aromatic hydrocarbons (PAHs) in lake still remain an issue. Here, we focused on the suspended particulate matter (SPM)-bound PAHs in Lake Chaohu, China to quantitatively estimate their spatiotemporal toxicities from different sources. A source-based quantitative method, positive matrix factorization (PMF)-benzo[a]pyrene-based toxic equivalency (TEQ_BaP) model, was applied. Firstly, we investigated the spatiotemporal characteristics of SPM-bound PAHs. The concentrations of Σ₂₁ PAHs ranged from 1646 to 19267 ng·g^-1. Low-ring PAHs were found to have the highest fractions. T-distributed stochastic neighbor embedding (t-SNE)-partitioning around medoid (PAM) technic revealed significantly spatiotemporal variation characteristics of SPM-bound PAHs in Lake Chaohu. Season, location (west or east lake zone), and sample classification (estuary or lake) together governed the patterns. Then, their potential sources were apportioned. Our results found that diagnostic ratios did not work perfectly. However, 3 factors were separated by PMF model. Unburned petroleum (F1), biomass, coal and gasoline combustion (F2), and diesel, straw combustion (F3) were the main sources of PAHs, accounting for 36.16%, 48.96% and 14.88%, respectively. The patterns of the source profiles were season-dependent. Finally, the toxicity of SPM-bound PAHs from different sources were predicted by PMF-TEQ_BaP model, and the model predictions were satisfactorily acceptable. Overall, predicted Σ₁₉ TEQ_BaP of SPM-bound PAHs in Lake Chaohu ranged from 20.8 to 947.9 ng·g^-1. Benzo[e]pyrene (BeP), benzo[a]pyrene (BaP) and benzo[b]fluoranthene (BbF) were the main toxic species. Temporally, PAH toxicity posed significantly seasonal differences. F3 had primary contributions to Σ₁₉ TEQ_BaP. Cutting the diesel consumption and using cleaner energy substitutes were suggested to reduce the PAH toxicity in Lake Chaohu. Overall, we expected this study could give new insights into the spatiotemporal associations between the sources and toxicities of SPM-bound PAHs in lake ecosystem.