Biodentine™ Boosts, WhiteProRoot®MTA Increases and Life® Suppresses Odontoblast Activity

Cytotoxicity of dilutions of bioceramic materials in stem cells of human exfoliated deciduous teeth

OBJECTIVE

Several materials have been developed to preserve pulp vitality. They should have ideal cytocompatibility characteristics to promote the activity of stem cells of human exfoliated deciduous teeth (SHED) and thus heal pulp tissue.

OBJECTIVE

To evaluate the cytotoxicity of different dilutions of bioceramic material extracts in SHED.

METHODOLOGY

SHED were immersed in αMEM + the material extract according to the following experimental groups: Group 1 (G1) -BBio membrane, Group 2 (G2) - Bio-C Repair, Group 3 (G3) - MTA Repair HP, Group 4 (G4) - TheraCal LC, and Group 5 (G5) - Biodentine. Positive and negative control groups were maintained respectively in αMEM + 10% FBS and Milli-Q Water. The methods to analyze cell viability and proliferation involved MTT and Alamar Blue assays at 24, 48, and 72H after the contact of the SHED with bioceramic extracts at 1:1 and 1:2 dilutions. Data were analyzed by the three-way ANOVA, followed by Tukey's test (p<0.05).

RESULTS

At 1:1 dilution, SHED in contact with the MTA HP Repair extract showed statistically higher cell viability than the other experimental groups and the negative control (p<0.05), except for TheraCal LC (p> 0.05). At 1:2 dilution, BBio Membrane and Bio-C showed statistically higher values in intra- and intergroup comparisons (p<0.05). BBio Membrane, Bio-C Repair, and Biodentine extracts at 1:1 dilution showed greater cytotoxicity than 1:2 dilution in all periods (p<0.05).

CONCLUSION

MTA HP Repair showed the lowest cytotoxicity even at a 1:1 dilution. At a 1:2 dilution, the SHED in contact with the BBio membrane extract showed high cell viability. Thus, the BBio membrane would be a new non-cytotoxic biomaterial for SHED. Results offer possibilities of biomaterials that can be indicated for use in clinical regenerative procedures of the dentin-pulp complex.

Apoptotic effects of biodentine, calcium-enriched mixture (CEM) cement, ferric sulfate, and mineral trioxide aggregate (MTA) on human mesenchymal stem cells isolated from the human pulp of exfoliated deciduous teeth

BACKGROUND

Preservation of primary teeth in children is highly important. Pulpotomy is a commonly performed treatment procedure for primary teeth with extensive caries. Thus, biocompatibility of pulpotomy agents is highly important. Biodentine, calcium enriched mixture (CEM) cement, ferric sulfate, and mineral trioxide aggregate (MTA) Angelus are commonly used for this purpose. Thus, this study aimed to assess the apoptotic effects of Biodentine, CEM cement, ferric sulfate, and MTA on stem cells isolated from the human pulp of exfoliated deciduous teeth.

METHODS

In this in-vitro, experimental study, stem cells isolated from the human pulp of exfoliated deciduous teeth were exposed to three different concentrations of Biodentine, CEM cement, ferric sulfate, and MTA for different time periods. The cytotoxicity of the materials was evaluated by flow cytometry using the annexin propidium iodide (PI) kit. Data were analyzed by ANOVA and Tukey's test at P<0.05 level of significance.

RESULTS

All four tested materials induced significantly greater apoptosis compared with the control group. The difference in cell apoptosis caused by the first concentration of ferric sulfate and MTA was not significant at 24 hours. In other comparisons, the cytotoxicity of ferric sulfate was significantly lower than that of other materials. Biodentine showed higher cytotoxicity than MTA at first; but this difference faded over time. The cytotoxicity of CEM cement was comparable to that of MTA. The highest cell viability was noted at 24 hours in presence of the minimum concentration of ferric sulfate. The lowest cell viability was noted at 72 hours in presence of the maximum concentration of CEM cement.

CONCLUSIONS

In comparison with other materials, ferric sulfate showed minimum cytotoxicity; the cytotoxicity of the three cements was comparable. It appears that the concentration of ferric sulfate and the composition of cements are responsible for different levels of cytotoxicity.

Advances in Regenerative Dentistry: A Systematic Review of Harnessing Wnt/β-Catenin in Dentin-Pulp Regeneration

Dentin pulp has a complex function as a major unit in maintaining the vitality of teeth. In this sense, the Wnt/β-Catenin pathway has a vital part in tooth development, maintenance, repair, and regeneration by controlling physiological activities such as growth, differentiation, and migration. This pathway consists of a network of proteins, such as Wnt signaling molecules, which interact with receptors of targeted cells and play a role in development and adult tissue homeostasis. The Wnt signals are specific spatiotemporally, suggesting its intricate mechanism in development, regulation, repair, and regeneration by the formation of tertiary dentin. This review provides an overview of the recent advances in the Wnt/β-Catenin signaling pathway in dentin and pulp regeneration, how different proteins, molecules, and ligands influence this pathway, either upregulating or silencing it, and how it may be used in the future for clinical dentistry, in vital pulp therapy as an effective treatment for dental caries, as an alternative approach for root canal therapy, and to provide a path for therapeutic and regenerative dentistry.

Comparative Evaluation of Push-out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, and Two Novel Antibacterial-enhanced Mineral Trioxide Aggregates

AIM

To evaluate the push-out bond strength of two newly modified mineral trioxide aggregates (MTAs) with conventional MTA and biodentine.

MATERIALS AND METHODS

Material preparation: Two commercially available bioactive bioceramics: Group I: Mineral trioxide aggregate; Group II: Biodentine; and two newly formulated modified MTAs: Group III: Doxycycline incorporated MTA formulation; Group IV: Metronidazole incorporated MTA formulation was used in the present study. All the test materials were then carried using a plastic instrument to the desired experimental design. Teeth sample preparation: A total of 120 teeth samples were collected and divided into four groups of test materials with 30 teeth samples per group. Single-rooted permanent teeth, that is, incisors were collected and stored in saline until the study was performed. Sectioning of the teeth into 2.0 ± 0.05-mm thick slices was performed perpendicular to the long axis of the tooth. The canal space was instrumented using Gates Glidden burs to achieve a diameter of 1.5 mm. All four prepared materials were mixed and placed in the lumen of the slices and placed in an incubator at 37°C for 72 hours. Push-out test and bond failure pattern evaluation: The push-out test was performed using a universal testing machine. The slices were examined under a scanning electron microscope (SEM) at 40× magnification to determine the nature of bond failure. All the collected data were recorded and statistically analyzed.

RESULTS

The mean push-out bond strength was found to be the highest for group II (37.38 ± 1.94 MPa) followed by group III (28.04 ± 2.22 MPa) and group IV (27.83 ± 1.34 MPa). The lowest mean push-out bond strength was noticed with group I (22.89 ± 2.49 MPa). This difference was found to be statistically significant (p = 0.000). Group I samples had the predominantly adhesive type of failure (86.4%), while group II samples showed the cohesive type of failure (94.2%). Both the modified MTAs (groups III and IV) primarily showed mixed types of failures.

CONCLUSION

Both the antibacterial-enhanced MTAs had better pushout bond strength compared to conventional MTA but did not outperform biodentine. Hence, it could serve as a substitute for conventional MTA due to its augmented physical properties.

CLINICAL SIGNIFICANCE

Carious pulp exposure and nonvital open apices pose a critical challenge to pediatric dental practitioners. In such circumstances, maintaining the vitality of pulp and faster healing would help in a better prognosis. Novel MTAs without any cytotoxic components, and enhanced antibacterial contents with augmented physical properties can help in treating such clinical conditions. How to cite this article: Merlin ARS, Ravindran V, Jeevanandan G, et al. Comparative Evaluation of Push-out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, and Two Novel Antibacterial-enhanced Mineral Trioxide Aggregates. J Contemp Dent Pract 2024;25(2):168-173.

Dentine Remineralisation Induced by "Bioactive" Materials through Mineral Deposition: An In Vitro Study

This study aimed to assess the ability of modern resin-based "bioactive" materials (RBMs) to induce dentine remineralisation via mineral deposition and compare the results to those obtained with calcium silicate cements (CSMs). The following materials were employed for restoration of dentine cavities: CSMs: ProRoot MTA (Dentsply Sirona), MTA Angelus (Angelus), Biodentine (Septodont), and TheraCal LC (Bisco); RBMs: ACTIVA BioACTIVE Base/Liner (Pulpdent), ACTIVA Presto (Pulpdent), and Predicta Bioactive Bulk (Parkell). The evaluation of the mineral deposition was performed through scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) on the material and dentine surfaces, as well as at the dentine-material interface after immersion in simulated body fluid. Additionally, the Ca/P ratios were also calculated in all the tested groups. The specimens were analysed after setting (baseline) and at 24 h, 7, 14, and 28 days. ProRoot MTA, MTA Angelus, Biodentine, and TheraCal LC showed significant surface precipitation, which filled the gap between the material and the dentine. Conversely, the three RBMs showed only a slight ability to induce mineral precipitation, although none of them was able to remineralise the dentine-material interface. In conclusion, in terms of mineral precipitation, modern "bioactive" RBMs are not as effective as CSMs in inducing dentine remineralisation; these latter represent the only option to induce a possible reparative process at the dentin-material interface.

A New Landscape of Human Dental Aging: Causes, Consequences, and Intervention Avenues

Aging is accompanied by physical dysfunction and physiologic degeneration that occurs over an individual's lifetime. Human teeth, like many other organs, inevitably undergo chronological aging and age-related changes throughout the lifespan, resulting in a substantial need for preventive, restorative as well as periodontal dental care. This is particularly the case for seniors at 65 years of age and those older but economically disadvantaged. Dental aging not only interferes with normal chewing and digestion, but also affects daily appearance and interpersonal communications. Further dental aging can incur the case of multiple disorders such as oral cancer, encephalitis, and other systemic diseases. In the next decades or even hundreds of years, the proportion of the elderly in the global population will continue to rise, a tendency that attracts increasing attention across multiple scientific and medical disciplines. Dental aging will bring a variety of problems to the elderly themselves and poses serious challenges to the medical profession and social system. A reduced, but functional dentition comprising 20 teeth in occlusion has been proposed as a measurement index of successful dental aging. Healthy dental aging is critical to healthy aging, from both medical and social perspectives. To date, biomedical research on the causes, processes and regulatory mechanisms of dental aging is still in its infancy. In this article, updated insights into typical manifestations, associated pathologies, preventive strategies and molecular changes of dental aging are provided, with future research directions largely projected.

Comparative Evaluation of the Physical and Antimicrobial Properties of Mineral Trioxide Aggregate, Biodentine, and a Modified Fast-Setting Mineral Trioxide Aggregate Without Tricalcium Aluminate: An In Vitro Study

Background Tricalcium aluminate, one of the major constituents of mineral trioxide aggregate (MTA), has been shown to have cytotoxic properties. Mineral trioxide aggregate has moderate to low antimicrobial activity against the most common endodontic pathogen, Enterococcus faecalis. Aim To assess the physical and antimicrobial properties of a newly modified formulation of mineral trioxide aggregate. Materials & methods The final setting time, compressive strength, and antimicrobial properties were tested for three groups of materials. The material used for Group 1 was mineral trioxide aggregate (white MTA, Angelus, Londrina, Brazil); the material for Group 2 was Biodentine (Septodont, Saint Maur des Fossés, France); and for Group 3, a modified MTA formulation was used. Results Group 1 had the longest setting time, and Group 2 had the shortest setting time. Group 3's material was set at 83.65 ± 0.28 minutes. This difference among the groups was statistically significant (p < 0.05). The highest mean compressive strength during all the time periods was seen in Group 2, followed by Group 3, and the least in Group 1. This difference in compressive strength was statistically significant (p=0.001). The largest zone of inhibition against Enterococcus faecalis, Candida albicans, and Streptococcus mutans was seen in Group 3, followed by Group 2 and Group 1. Conclusion Under the limitations of the present study, the newly modified MTA could serve as an alternative to the conventional MTA in terms of faster setting, higher strength, and better antimicrobial properties.

Fast-Setting Calcium Silicate-Based Pulp Capping Cements-Integrated Antibacterial, Irritation and Cytocompatibility Assessment

Calcium silicate-based cements (CSCs) are endodontic materials widely used in vital pulp-capping approaches. Concerning the clinical application, the reduced set time and pre-mixed formulations are relevant characteristics during the operative management of pulpal exposure, aiming to optimise the work time and improve cross-infection/asepsis control. Additionally, clinical success seems to be greatly dependent on the biological performance of the materials that directly contact the living pulp. As such, this work approaches an integrative biological characterisation (i.e., antibacterial, irritation, and cytocompatibility assays) of three fast-setting CSCs-Biodentine^TM, TotalFill^® BC RRM™ Fast Putty, and Theracal LC^®. These cements, after setting for 24 h, presented the expected topography and elemental composition (assessed by scanning electron microscopy, coupled with EDS analysis), in accordance with the information of the manufacturer. The set cements displayed a significant and similar antibiofilm activity against S. mutans, in a direct contact assay. Twenty-four-hour eluates were not irritant in the standardised CAM assay, but elicited distinct dose- and time-dependent cytotoxicity profiles on fibroblastic cells-i.e., Biodentine was devoid of toxicity, TotalFill presented a slight dose-dependent initial toxicity that was easily overcome, and Theracal LC was deleterious at high concentrations. When compared to long-setting ProRoot MTA cement, which highlighted the pursued integrative approach, Biodentine presented a similar profile, but TotalFill and Theracal LC displayed a poorer performance regarding antibiofilm activity/cytocompatibility features, and Theracal LC suggested eventual safety concerns.

The scientific management of deep carious lesions in vital teeth using contemporary materials—A narrative review

Aim

The aim of this article is to review the scientific evidence for deep caries removal in permanent vital teeth and the choice of dentine replacement material and restoration of the teeth to maintain long term tooth vitality and function.

Method

The two position statements namely the European Society of Endodontology and the American Association of Endodontists position statements on vital pulp therapy will be scrutinized and compared with regards to the deep caries removal strategy and assessed for evidence of best practice. The properties of materials used to manage vital pulps and the best way to restore the teeth will be reviewed and guidance on the full management of vital teeth will be suggested.

Conclusions

Promoting new treatment modalities for reversible and irreversible pulpitis allowing for pulp preservation should be considered. Although debatable, cases with deep caries should be managed by complete non-selective caries removal which will allow for pulpal management if needed and a more predictable outcome can be expected when using the new materials and treatment modalities of vital pulp therapy.

The Cytotoxicity and Genotoxicity of Bioactive Dental Materials

The promotion of biologically based treatment strategies in restorative dentistry is of paramount importance, as invasive treatments should be avoided to maintain the tooth's vitality. This study aimed to assess the biocompatibility of commercially available bioactive materials that can be used for dental pulp capping. The study was performed with a monocyte/macrophage peripheral blood SC cell line (ATCC CRL-9855) on the following six specific bioactive materials: ProRoot MTA (Dentsply Sirona), MTA Angelus (Angelus), Biodentine (Septodont), TheraCal LC (Bisco), ACTIVA BioACTIVE (Pulpdent) and Predicta Bioactive Bulk (Parkell). The cytotoxicity of the investigated agents was measured using a resazurin-based cell viability assay, while the genotoxicity was evaluated using an alkaline comet assay. Additionally, flow cytometry (FC) apoptosis detection was conducted with a FITC (fluorescein isothiocyanate) Annexin V Apoptosis Detection Kit I. FC cell-cycle arrest assessment was carried out with propidium iodide staining. The results of this study showed no significant cytotoxicity and genotoxicity (p > 0.05) in ProRoot MTA, MTA Angelus, Biodentine, ACTIVA BioACTIVE and Predicta Bioactive. Conversely, TheraCal LC presented a significant decrease (p < 0.001). In conclusion, due to excellent biocompatibility and low cytotoxicity, MTA, Biodentine, ACTIVA BioACTIVE and Predicta Bioactive may be suitable for pulp capping treatments. On the other hand, due to the high cytotoxicity of TheraCal LC, its use should be avoided in vital pulp therapies.

Dentin Sialoprotein/Phosphophoryn (DSP/PP) as Bio-Inductive Materials for Direct Pulp Capping

Conventional direct pulp capping, such as calcium hydroxide (Ca(OH)₂) or silicate products, usually induces an inflammatory reaction to provoke pulp regeneration. Phosphophoryn (PP) and dentin sialoprotein (DSP), the two most abundant non-collagenous proteins in the dentin matrix, are responsible for dentin mineralization, pulp cell migration, and differentiation. Here we examined the PP and combined DSP/PP as bio-inductive pulp capping materials by in vitro and in vivo tests. Firstly, the effects of the PP dose on pulp cell migration and matrix protein expression were examined by an agarose bead test. Secondly, the role of recombinant DSP (recDSP) and recDSP/PP on stimulating DSP-PP transcript expression was examined by RT-PCR. DSPP mRNA was also knocked down by RNA interference (RNAi) to examine their functions on dentin matrix mineralization. Finally, we used ferret animal models to test PP and recDSP/PP acting as capping agents on in vivo pulp responses and reparative dentin formation. The result showed that intermediate-dose PP was the most effective to enhance cell migration and differentiation. RecDSP/PP strongly enhanced the DSP-PP transcript expression, while inhibition of DSPP mRNA expression by siRNAs partially or completely affected dental pulp cell mineralization. The in vivo results showed that intermediate-dose PP and recDSP/PP proteins induced less pulp inflammation and promoted reparative dentin formation. Contrarily, conventional calcium hydroxide induced severe pulp inflammation. With these findings, DSP and PP could serve as capping agents for pulp capping therapy.

Present status and future directions: Hydraulic materials for endodontic use

BACKGROUND

Hydraulic materials are used in Endodontics due to their hydration characteristics namely the formation of calcium hydroxide when mixing with water and also because of their hydraulic properties. These materials are presented in various consistencies and delivery methods. They are composed primarily of tricalcium and dicalcium silicate, and also include a radiopacifier, additives and an aqueous or a non-aqueous vehicle. Only materials whose primary reaction is with water can be classified as hydraulic.

OBJECTIVES

Review of the classification of hydraulic materials by Camilleri and the literature pertaining to specific uses of hydraulic cements in endodontics namely intra-coronal, intra-radicular and extra-radicular. Review of the literature on the material properties linked to specific uses providing the current status of these materials after which future trends and gaps in knowledge could be identified.

METHODS

The literature was reviewed using PUBMED, and for each clinical use, the in vitro properties such as physical, chemical, biological and antimicrobial characteristics and clinical data were extracted and evaluated.

RESULTS

A large number of publications were retrieved for each clinical use and these were grouped depending on the property type being investigated.

CONCLUSIONS

The hydraulic cements have made a difference in clinical outcomes. The main shortcoming is the poor testing methodologies employed which provide very limited information and also inhibits adequate clinical translation. Furthermore, the clinical protocols need to be updated to enable the materials to be employed effectively.

Isolation and Identification of Cytotoxic Compounds Present in Biomaterial Life®

Direct pulp capping consists of a procedure in which a material is directly placed over the exposed pulp to maintain dental vitality. Although still widely used in clinical practice, previous in vitro studies found that the biomaterial Life^® presented high cytotoxicity, leading to cell death. This study aimed to identify the Life^® constituents responsible for its cytotoxic effects on odontoblast-like cells (MDPC-23). Aqueous medium conditioned with Life^® was subjected to liquid-liquid extraction with ethyl acetate. After solvent removal, cells were treated with residues isolated from the organic and aqueous fractions. MTT and Trypan blue assays were carried out to evaluate the metabolic activity and cell death. The organic phase residue promoted a significant decrease in metabolic activity and increased cell death. On the contrary, no cytotoxic effects were observed with the mixture from the aqueous fraction. Spectroscopic and spectrometric methods allowed the identification of the toxic compounds. A mixture of the regioisomers ortho, para, and meta of N-ethyl-toluenesulfonamide was identified as the agent responsible for the toxicity of biomaterial Life^® in MDPC-23 cells. These findings contribute to improving biomaterial research and development.

Subcutaneous tissue reaction and gene expression of inflammatory markers after Biodentine and MTA implantation

The aim of this study was to evaluate the subcutaneous connective tissue response of isogenic mice exposed to tricalcium silicate (Biodentine) and aggregated mineral trioxide (ProRoot MTA). A total of 120 mice were divided into 4 groups in 3 different experimental periods (7, 21 and 63 days): Biodentine; Pro-Root MTA; zinc oxide-eugenol and; Negative control - Sham. After the experimental periods microscopic descriptive, semi-quantitative and quantitative analysis of the inflammatory process were analyzed on H&E sections and evaluation of the gene expression of Il10, Infg, Il6, Il1r1 and Tnf (qRT-PCR) were performed. The data obtained were analyzed using the chi-square test and two-way analysis of variance (ANOVA) followed by the Bonferroni post-test (5% significance level). Results: In the microscopic analysis, a slight inflammatory infiltrate was observed, with a predominance of sparse macrophages and polymorphonuclear cells, slight tissue fibrosis, regular fibrous capsule and with dystrophic calcifications, in all groups that received the materials (Biodentine and Pro-Root MTA). In parallel, all materials modulated the gene expression of the different cytokines and receptors evaluated. Conclusion: Pro-Root MTA and Biodentine showed a tissue compatibility, mediated inflammation, with increased fibrous tissue and production of pro- and anti-inflammatory cytokines.

Effectiveness of Direct Pulp Capping Bioactive Materials in Dentin Regeneration: A Systematic Review

Background: Regenerative endodontics aims to restore normal pulp function in necrotic and infected teeth, restoring protective functions, such as innate pulp immunity, pulp repair through mineralization, and pulp sensibility. The aim of this systematic review was to assess the dentin regeneration efficacy of direct pulp capping (DPC) biomaterials. Methods: The literature published between 2005 and 2021 was searched by using PubMed, Web of Science, Science Direct, Google Scholar, and Scopus databases. Clinical controlled trials, randomized controlled trials, and animal studies investigating DPC outcomes or comparing different capping materials after pulp exposure were included in this systematic review. Three independent authors performed the searches, and information was extracted by using a structured data format. Results: A total of forty studies (21 from humans and 19 from animals) were included in this systemic review. Histological examinations showed complete/partial/incomplete dentin bridge/reparative dentin formation during the pulp healing process at different follow-up periods, using different capping materials. Conclusions: Mineral trioxide aggregate (MTA) and Biodentine can induce dentin regeneration when applied over exposed pulp. This systematic review can conclude that MTA and its variants have better efficacy in the DPC procedure for dentin regeneration.

Effects of Adper™ Scotchbond™ 1 XT, Clearfil™ SE Bond 2 and Scotchbond™ Universal in Odontoblasts

This study aimed to assess the cytotoxicity of commercially available adhesive strategies-etch-and-rinse (Adper™ Scotchbond™ 1 XT, 3M ESPE, St. Paul, MN, USA, SB1), self-etch (Clearfil™ SE Bond 2, Kuraray Noritake Dental Inc., Tokyo, Japan, CSE), and universal (Scotchbond™ Universal, 3M Deutschland GmbH, Neuss, Germany, SBU). MDPC-23 cells were exposed to adhesives extracts in different concentrations and exposure times. To access cell metabolic activity, viability, types of cell death, and cell cycle, the MTT assay, SRB assay, double labeling with annexin V and propidium iodide, and labeling with propidium iodide/RNAse were performed, respectively. Cultures were stained with May-Grünwald Giemsa for qualitative cytotoxicity assessment. The SB1, CSE, and SBU extracts determined a significant reduction in cell metabolism and viability. This reduction was higher for prolonged exposures, even for less concentrated extracts. CSE extracts significantly reduced the cell's metabolic activity at higher concentrations (50% and 100%) from 2 h of exposure. After 24 and 96 h, a metabolic activity reduction was verified for all adhesives, even at lower concentrations. These changes were dependent on the adhesive, its concentration, and the incubation time. Regarding cell viability, SBU extracts were the least cytotoxic, and CSE was significantly more cytotoxic than SB1 and SBU. The adhesives determined a reduction in viable cells and an increase in apoptotic, late apoptosis/necrosis, and necrotic cells. Moreover, on cultures exposed to SB1 and CSE extracts, a decrease in the cells in S and G2/M phases and an increase in the cells in G0/G1 phase was observed. Exposure to SBU led to an increase of cells in the S phase. In general, all adhesives determined cytotoxicity. CSE extracts were the most cytotoxic and were classified as having a higher degree of reactivity, leading to more significant inhibition of cell growth and destruction of the cell's layers.

Multifunctional Ca-Zn-Si-based micro-nano spheres with anti-infective, anti-inflammatory, and dentin regenerative properties for pulp capping application

While pulp capping using a variety of materials has been applied clinically to preserve the health and vitality of the dental pulp and induce dentin repair no material meets all the anti-infection, anti-inflammation, and promoting pulp tissue regeneration criteria. Micro-nano materials of bioactive glasses (BG) with the biocompatibility and osteogenesis-promoting properties were developed for this study using Zn-doped bioactive glass (BGz) micro-nano spheres for dental pulp capping to control infection and inflammation and promote tissue regeneration. Of three key findings, the co-culture of Porphyromonas gingivalis showed that the BGz had an excellent antibacterial effect, and after being stimulated with BGz in vitro, macrophages showed a significant decrease of pro-inflammatory M1 markers compared with the undoped BG group. It is also noted that the conditioned medium derived from BGz-stimulated macrophages could significantly promote mineralized dentin formation of dental pulp cells (DPCs). In rats, acute pulp restoration experiments proved that BGz used as a pulp capping agent had excellent dentin regenerative properties. This work may provide a novel strategy to promote osteo/dentinogenic differentiation through regulating early inflammation, with potential applications in pulp capping.

Local Drug Delivery Systems for Vital Pulp Therapy: A New Hope

Vital pulp therapy (VPT) is deliberated as an ultraconservative/minimally invasive approach for the conservation of vital pulpal tissues, preservation of dental structure, and maintenance of tooth function in the oral cavity. In VPT, following the exposure of the dental pulp, the environment is prepared for the possible healing and probable refunctionalisation of pulpal connective tissue. However, to succeed in VPT, specific biomaterials are used to cover and/or dress the exposed pulp, lower the inflammation, heal the dental pulp, provoke the remaining odontoblastic cells, and induce the formation of a hard tissue, i.e., the dentinal bridge. It can be assumed that if the employed biomaterial is transferred to the target site using a specially designed micro-/nanosized local drug delivery system (LDDS), the biomaterial would be placed in closer proximity to the connective tissue, may be released in a controlled and sustained pattern, could properly conserve the remaining dental pulp and might appropriately enhance hard-tissue formation. Furthermore, the loaded LDDS could help VPT modalities to be more ultraconservative and may minimise the manipulation of the tooth structure as well as pulpal tissue, which could, in turn, result in better VPT outcomes.

Biological parameters, discolouration and radiopacity of calcium silicate-based materials in a simulated model of partial pulpotomy

AIM

To analyse the discolouration, radiopacity, pH and calcium ion release of Biodentine (BD), Bio-C repair (BCR) and Bio-C temp (BCT), as well as their biological effects on human dental pulp cells (hDPCs).

METHODOLOGY

Sixty-four extracted bovine incisors were prepared to simulate crown fractures with pulp exposure and open root apex. The roots were filled using a mixture of agar and blood (control), and BD, BCR or BCT were placed over this mixture. Colour assessment analyses of the samples were performed before and immediately after material insertion and repeated at 30 and 90 days, using a spectrophotometer. The colour change of each specimen was evaluated at the crown and calculated based on the CIELab colour space. Digital radiographs were acquired for radiopacity analysis. hDPCs were placed in contact with different dilutions of culture media previously exposed to such materials and tested for cell viability using the MTT assay. The pH and calcium ion release of all materials were measured after 24 h; the data were assessed using one-way analysis of variance (ANOVA). Cell viability was analysed by two-way ANOVA. Differences in colour parameters and wound-healing data were assessed by two-way repeated measures ANOVA (α = 0.05). Tukey's and Dunnett's tests were used to compare the experimental groups with the control group.

RESULTS

BCR had grater radiopacity and smaller colour alteration (ΔEab/ΔE00) than the other materials tested (p < .005; p < .001). No significant differences in pH were found amongst the tested materials (p > .05). BCT was associated with the largest release of calcium ions (p < .0001). BD had cell viability similar to that of the control at the lowest dilutions, and BCR was similar to that of the control, regardless of the dilution tested (p > .05). BCT had a lower percentage of viability than that of the control at all tested dilutions (p < .0001). Cell migration rates in BD and BCR were similar to those in the control group after 24 h and 48 h (p > .05), whilst BCT had larger voids than the control in both periods (p < .0001).

CONCLUSIONS

BCR, BCT and BD were associated with tooth discolouration. BCR had the lowest staining values, the highest radiopacity and viability greater than 80% hDPCs.

Tooth Repair and Regeneration: Potential of Dental Stem Cells

Tooth defects are an extremely common health condition that affects millions of individuals. Currently used dental repair treatments include fillings for caries, endodontic treatment for pulp necrosis, and dental implants to replace missing teeth, all of which rely on the use of synthetic materials. By contrast, the fields of tissue engineering and regenerative medicine and dentistry (TERMD) use biologically based therapeutic strategies for vital tissue regeneration, and thus have the potential to regenerate living tissues. Methods to create bioengineered replacement teeth benefit from a detailed understanding of the molecular signaling networks regulating natural tooth development. We discuss how key signaling pathways regulating natural tooth development are being exploited for applications in TERMD approaches for vital tooth regeneration.

Notoginsenoside R1 functionalized gelatin hydrogels to promote reparative dentinogenesis

Pulp-capping materials are commonly adopted in the clinic to form reparative dentin and thus protect dental pulp tissues from cases of deep caries, accidentally exposed pulps or partial pulpotomy. Some traditional pulp capping materials used in the clinic include calcium hydroxide and mineral trioxide aggregates. However, there are limitations to thin restorative dentin, and a long period of time is needed to cause degenerative changes in dental pulp. In this paper, injectable colloidal gels were developed to induce the formation of reparative dentin through a simple UV method from methacrylic acid functionalized gelatin loaded with notoginsenoside R1 (Gel-MA/NGR1). The results of the physicochemical property examinations showed that the prepared Gel-MA/NGR1 hydrogel possessed an appropriate interconnected porous microarchitecture with a pore size of 10.5 micrometres and suitable mechanical properties with a modulus of 50-60 kPa, enabling cell adhesion and proliferation. The hydrogel remained hydrophilic with sustained drug release performance. In addition, Gel-MA/NGR1 significantly enhanced the odontogenetic differentiation of mouse dental papilla cells by elevating the expression levels of the dentinogenic markers ALP and OCN and extracellular matrix mineralization. In vivo stimulation was carried out by injecting the precursors into the predrilled alveolar cavity of Sprague-Dawley rats followed by immediate in situ UV crosslinking. The results showed that Gel-MA/NGR1 has a strong capacity to promote reparative dentin formation. Haematoxylin& eosin, Masson, and immunohistochemical staining (DMP-1, DSPP, OCN and RUNX2) and micro-CT were employed to illustrate the effectiveness of dentinogenesis, and the relative volumes of calcification were found to have increased ~175-fold. All of the results showed that the Gel-MA/NGR1 hydrogel promoted reparative dentin formation, which suggests that this hydrogel provides great potential as a pulp-capping material to induce dentin formation.

Alterations of mitochondrial dynamics, inflammation and mineralization potential of lipopolysaccharide-induced human dental pulp cells after exposure to N-acetyl cysteine, Biodentine or ProRoot MTA

AIM

To investigate the effects of N-acetyl cysteine (NAC), Biodentine, ProRoot MTA and their combinations, on cell viability, mitochondrial reactive oxygen species (mtROS) production, mineralization and on the expression of genes related to inflammatory cytokine production, mitochondrial dynamics and cell apoptosis of lipopolysaccharide (LPS)-induced human dental pulp cells (hDPCs).

METHODOLOGY

Isolated hDPCs were exposed to 20 μg mL^-1 of Escherichia coli (E. coli) LPS for 24 h, before the experiment, except for the control group. Eight experimental groups were assigned: (i) control (hDPCs cultured in regular medium), (ii) +LPS (hDPCs cultured in LPS medium throughout the experiment), (iii) -LPS/Media, (iv) -LPS/BD, (v) -LPS/MTA, (vi) -LPS/NAC, (vii) -LPS/BD + NAC and (viii) -LPS/MTA + NAC. Cell viability was measured using Alamar blue assay at 24 and 48 h. Production of mtROS was evaluated at 6 and 24 h by MitoSOX Red and MitoTracker Green. The expressions of IL-6, TNF-α, Bcl-2, Bax, Mfn-2 and Drp-1 genes were investigated at 6 h using reverse transcriptase-polymerase chain reaction (RT-PCR). For differentiation potential, cells were cultured in the osteogenic differentiation media and stained using Alizarin red assay at 14 and 21 days. The Kruskal-Wallis test, Mann-Whitney U test and one-way anova were performed for statistical analysis.

RESULTS

NAC was associated with significantly greater LPS-induced hDPC viability (P < 0.05). Both Biodentine and MTA extracts promoted cell survival, whereas the combination of NAC to these material extracts significantly increased the number of viable cells at 24 h (P < 0.05). Biodentine, MTA or NAC did not alter the mtROS level (P > 0.05). NAC supplementation to the MTA extract significantly reduced the level of IL-6 and TNF-α expression (P < 0.05). Regarding mitochondrial dynamics, the use of NAC alone promoted significant Mfn-2/Drp-1 expression (P < 0.05). Most of the groups exhibited a level of Bcl-2/Bax gene expression similar to that of the control group. The increases in mineralization productions were observed in most of the groups, except the LPS group (P < 0.05).

CONCLUSIONS

The antioxidant effect of NAC was not evident under the LPS-induced condition in DPC in vitro. NAC combined either with Biodentine or MTA improved LPS-induced hDPCs survival at 24 h. The combination of NAC with MTA promoted mineralization.

Microhardness and surface roughness of Biodentine exposed to mouthwashes

Aim:

This study evaluates Vickers microhardness and surface roughness in Biodentine cement (M1) and glass-ionomer cement Fuji IX (M2), both immersed in mouthwash.

Materials and Methods:

Fifty-four samples were randomly distributed in distilled water (S1), Listerine Cool Mint (S2), and Colgate Plax (S3). Each sample was put in a flask with mouthwash for 2 min, under vibration, twice a day for 21 days. Microhardness and surface roughness were assessed at 48 h (T0), 7 days (T1), 14 days (T2), and 21 days (T3).

Results:

For roughness: time (T), solution (S) and material (M), TxM, and SxM and for microhardness: M, TxS, TxM, and SxM were statistically significant. T3, M1, M1T3, and M1S1 presented the highest surface roughness. M2, M1T0, M1T1, M1T2, M1S1, and M1S2 presented higher microhardness.

Conclusion:

Biodentine showed higher surface roughness for T1, T2, and T3 and higher microhardness for T0, T1, and T2 against Fuji IX. Biodentine presented higher microhardness independently of solution.

GuttaFlow® Bioseal Cytotoxicity Assessment: In Vitro Study

The sealers used for root canal treatment should be biocompatible for the peri-radicular tissues, to evaluate the cytotoxic effects of GuttaFlow® bioseal sealer and to compare them with AH26® epoxy resin. Culture media were conditioned with the GuttaFlow® bioseal and AH26® pellets. MDPC-23 odontoblast cell cultures were treated with conditioned medium and serial dilutions. To evaluate the metabolic activity and cellular viability, the MTT and SRB assays were performed. To determine the production of reactive oxygen species, the DHE and DCF-DA probes were used. Cell cycle and cell-death types were assessed by cytometry, and to evaluate the mineralization capacity, the Alizarin Red S coloration was used. Statistical analysis was performed using analysis of variance (ANOVA) when normality was found and Kruskal-Wallis on the opposite case. For the comparison with normality values, the Student t-test was used. Cells exposed to the GuttaFlow® bioseal conditioned medium maintained high metabolic activities, except at higher concentrations. Likewise, viability was maintained, but a significant decrease was observed after exposure to the highest concentration (p < 0.001), associated with cell death by late apoptosis and necrosis. When cell cultures were exposed to AH26®, metabolic activity was highly compromised, resulting in cell death. An imbalance in the production of peroxides and superoxide anion was observed. GuttaFlow® bioseal showed higher biocompatibility than AH26®.

Analysis of the Activity and Expression of Cyclooxygenases COX1 and COX2 in THP-1 Monocytes and Macrophages Cultured with BiodentineTM Silicate Cement

Biodentine^TM is a material based on hydrated calcium silicate with odontotropic properties. However, from the clinician’s perspective, every material used to fill a tooth—even those showing the optimal biochemical parameters—is in fact a foreign body introduced to the organism of the host. Therefore, apart from the chemical parameters of such materials, equally important is the so-called biocompatibility of such materials. The aim of the study was to investigate whether Biodentine^TM, used in the regeneration of the pulp-dentine complex, may affect the expression of the enzymes cyclooxygenase 1 (COX1) and cyclooxygenase 2 (COX2) in THP-1 monocytes/macrophages and the amount of prostanoids synthesized by these enzymes-precursors of biologically active prostanoids such as prostaglandin E2 (PGE2) and thromboxane (TXB2) which are mediators of inflammation. An original aspect of this research is the use of the THP-1 monocyte/macrophage cell model and the use of biomaterial in direct contact with cells. In this way we tried to reflect the clinical conditions of regenerative pulp and periodontal tissue treatment using Biodentine^TM. The results of our study showed a lack of macrophage activation (measured by flow cytometry) and a lack of stimulation of the expression of the studied cyclooxygenase enzymes (measured by Western blotting and fluorescent microscopy), as well as a lack of increase in the concentration (measured by ELISA method) of their inflammatory mediators (PGE2 and TXB2) in vitro incubated with Biodentine^TM.

Bio-Inductive Materials in Direct and Indirect Pulp Capping-A Review Article

The article is aimed at analyzing the available research and comparing the properties of bio-inductive materials in direct and indirect pulp capping procedures. The properties and clinical performances of four calcium-silicate cements (ProRoot MTA, MTA Angelus, RetroMTA, Biodentine), a light-cured calcium silicate-based material (TheraCal LC) and an enhanced resin-modified glass-ionomer (ACTIVA BioACTIVE) are widely discussed. A correlation of in vitro and in vivo data revealed that, currently, the most validated material for pulp capping procedures is still MTA. Despite Biodentine's superiority in relatively easier manipulation, competitive pricing and predictable clinical outcome, more long-term clinical studies on Biodentine as a pulp capping agent are needed. According to available research, there is also insufficient evidence to support the use of TheraCal LC or ACTIVA BioACTIVE BASE/LINER in vital pulp therapy.