Origin of Activity and Stability Enhancement for Ag₃PO₄ Photocatalyst after Calcination

Mesoporous LaVO4/MCM-48 nanocomposite with visible-light-driven photocatalytic degradation of phenol in wastewater

Dearomatization through photocatalytic oxidation is a swiftly rising phenolic compounds removal technology that works at trifling operations requirements with a special emphasis on the generation of nontoxic products. The study aims to develop a LaVO₄/MCM-48 nanocomposite that was prepared via a hydrothermally approach assisting the employment of an MCM-48 matrix, which was then utilized for phenol degradation processes. Various techniques including UV-Vis DRS, FTIR, PL, Raman, TEM, and BET analyses are employed to characterize the developed photocatalyst. The developed photocatalyst presented remarkable characteristics, especially increased light photon utilization, and reduced recombination rate leading to enhanced visible-light-driven photodegradation performance owing to the improved specific surface area, specific porosities, and <2 eV narrow energy bandgap. The LaVO₄/MCM-48 nanocomposite was experienced on aqueous phenol solution having 20 mg/L concentration under visible-light exposure, demonstrating exceptional performance in photodegradation up to 99.28%, comparatively higher than pure LaVO₄. The conducted kinetic measurements revealed good accordance with pseudo first-order. A possible reaction mechanism for photocatalytic degradation was also predicted. The as-synthesized LaVO₄/MCM-48 nanocomposite presented excellent stability and recyclability.

Recyclable Carbon Cloth-Supported ZnO@Ag3PO4 Core-Shell Structure for Photocatalytic Degradation of Organic Dye

The extensive use of organic dyes in industry has caused serious environmental problems, and photocatalysis is a potential solution to water pollution by organic dyes. The practical application of powdery photocatalysts is usually limited by the rapid recombination of charge carriers and difficulty in recycling. In this study, recyclable carbon cloth-supported ZnO@Ag₃PO₄ composite with a core-shell structure was successfully prepared by solvothermal treatment and subsequent impregnation-deposition. The as-prepared carbon cloth-supported ZnO@Ag₃PO₄ composite showed an improved photocatalytic activity and stability for the degradation of rhodamine B (RhB), a model organic dye, under visible light irradiation. The decomposition ratio of RhB reached 87.1% after exposure to visible light for 100 min, corresponding to a reaction rate constant that was 4.8 and 15.9 times that of carbon cloth-supported Ag₃PO₄ or ZnO alone. The enhanced performance of the composite can be attributed to the effectively inhibited recombination of photoinduced electron-hole pairs by the S-scheme heterojunction. The carbon fibers further promoted the transfer of charges. Moreover, the carbon cloth-supported ZnO@Ag₃PO₄ can be easily separated from the solution and repeatedly used, demonstrating a fair recyclability and potential in practical applications.

Ultrafast photodegradation of nitenpyram by Ag/Ag3PO4/Zn-Al LDH composites activated by persulfate system: Removal efficiency, degradation pathway and reaction mechanism

In this study, an investigation is conducted into the degradation of nitenpyram (NTP) using highly efficient APMMO/PDS/Vis system. As photocatalysts, silver phosphate (AP) and calcined Zn-Al layered double hydroxides (MMO) exhibit high efficiency in achieving charge separation. Besides, the injection of electrons into peroxydisulfate (PDS) from the APMMO can contribute to obtaining the species in the active state with higher efficiency. Based on the APMMO/PDS/Vis system, 50 mg/L of nitenpyram (NTP, 50 mL) can be completely removed in 60 min using 0.8 g/L photocatalyst and 0.2 g/L PDS under the optimum condition and visible light (780 nm > λ > 420 nm). Meanwhile, as demonstrated under visible light within 30 min, an ultrahigh degradation efficiency can be achieved by NTP based on APMMO1/PDS/Vis system. Besides, the electron paramagnetic resonance (EPR) technique and radical quenching experiments suggested ¹O₂, h⁺, SO₄^-•, •O₂^-, and •OH are all contributory to the removal of pollutants. Given the outcomes achieved by LC/MS system and mass spectrometry, the primary degradation intermediates of NTP end up being converted into photodegradation products (such as 2-Chloropyridine, 6-Chloropurine Riboside and dl-Leucine). Additionally, there are three potential photodegradation pathways to NTP degradation have been deployed. Moreover, the NTP light degradation occurring in APMMO1/PDS/Vis system is competent under the three types of real water sample. Accordingly, the high-efficiency APMMO1/PDS/Vis system is fit for use in water pollution control for agricultural productions.

Clay-Supported Metal Oxide Nanoparticles in Catalytic Advanced Oxidation Processes: A Review

Advanced oxidation processes (AOPs) utilizing heterogeneous catalysts have attracted great attention in the last decade. The use of solid catalysts, including metal and metal oxide nanoparticle support materials, exhibited better performance compared with the use of homogeneous catalysts, which is mainly related to their stability in hostile environments and recyclability and reusability. Various solid supports have been reported to enhance the performance of metal and metal oxide catalysts for AOPs; undoubtedly, the utilization of clay as a support is the priority under consideration and has received intensive interest. This review provides up-to-date progress on the synthesis, features, and future perspectives of clay-supported metal and metal oxide for AOPs. The methods and characteristics of metal and metal oxide incorporated into the clay structure are strongly influenced by various factors in the synthesis, including the kind of clay mineral. In addition, the benefits of nanomaterials from a green chemistry perspective are key aspects for their further considerations in various applications. Special emphasis is given to the basic schemes for clay modifications and role of clay supports for the enhanced mechanism of AOPs. The scaling-up issue is suggested for being studied to further applications at industrial scale.

Preparation and characterization of silver orthophosphate photocatalytic coating on glass substrate

The photocatalytic activity of silver orthophosphate Ag3PO4 has been studied and shown to have a high photo-oxidation capability. However, there is few reported example of a simple method to prepare Ag3PO4 coatings on various substrates. In this study a novel and simple method to immobilize Ag3PO4 on the surface of glass substrates has been developed. A silver phosphate paste based on a polyelectrolyte solution was applied to a smooth glass surface. The resulting dried material was calcined to obtain a coating that remained on the glass substrate. The coating layer was characterized by X-ray diffraction and energy dispersive X-ray spectrometry, and the optical band gap of the material was determined. The results indicated that an Ag3PO4 coating responsive to visible light was successfully prepared. The coating, under visible light irradiation, has the ability to decompose methylene blue. Although the coating contained some elemental silver, this did not adversely affect the optical band gap or the photocatalytic ability.

Fast and efficient degradation of water pollutant dyes and fungicide by novel sulfur-doped graphene oxide-modified Ag3PO4 nanocomposite

The sulfur-doped graphene oxide (sGO)-integrated Ag₃PO₄ composite displayed very high catalytic activity toward prominent water pollutants like textile dyes and fungicide under sunlight. The optimum amount of sGO doping was found as 5% for degradation. The novel composite degraded 99% of methylene blue (MB) in only 5 min of sunlight exposure, which is 16 and 8 times faster than Ag₃PO₄ and 5% GO-Ag₃PO₄. High mineralization was observed for MB with a total organic carbon (TOC) removal of 98% in 30 min. The composite mineralized rhodamine B, methyl orange, and acid red 18 dyes with a TOC removal above 95%. Moreover, a toxic dithiocarbamate fungicide thiram was degraded in 1 h with a TOC removal of 82% leaving less toxic thiourea. The formation of sGO-Ag₃PO₄ n-n heterojunction increases charge transport and photocatalytic activity of the composite to incredible extent along with hollow morphology and in situ formed Ag nanoparticles (AgNPs).

Agro-waste extracted cellulose supported silver phosphate nanostructures as a green photocatalyst for improved photodegradation of RhB dye and industrial fertilizer effluents

The efficiency and reusability of photocatalysts are the dominant factors for their pragmatic use. The visible light induced semiconductor silver phosphate is a superior photocatalyst effective under visible light but its stability is still an undiscussed issue. To overcome this stability issue in this present manuscript, eco-friendly agro-waste extracted cellulose supported silver phosphate nanostructures have been designed for the first time through a simple chemical process. At first, silver phosphate nanostructures were synthesized by the co-precipitation method. Then, different weights of cellulose were added to the silver nitrate solution to form cellulose supported silver phosphate nanostructures. The photodegradation efficiency for each weight ratio was examined in which the photocatalyst Ag-8 nanostructures showed a high rate (0.024 min^-1) for degradation of Rhodamine B (RhB) using a low intensity tungsten bulb. Real sample analysis has also been carried out using this photocatalyst for the degradation of industrial fertilizer effluents. The degradation rate of all the nanostructures was found to be high in comparison to pristine silver phosphate as well as the extracted bare cellulose. The photocatalytic activity is enhanced because of the participation of cellulose as a support which makes an interface for silver phosphate and assists it in delaying the charge recombination period under visible light. To understand the photochemical reaction of electrons and holes, scavenger studies were also performed.

Investigation of the kinetics and mechanism of Z-scheme Ag3PO4/WO3 p–n junction photocatalysts with enhanced removal efficiency for RhB

The activity of an Ag₃PO₄/polyhedron-like WO₃ photocatalyst could be enhanced 27 times compared to P25 in the visible light-driven region towards RhB.

Hydrothermal synthesis and characterization of novel yellow pigments based on V5+ doped BiPO4 with high near-infrared reflectance

A series of new yellow pigments was synthesized (BiP_1−xV_xO₄), coatings colored with synthesized pigments have high NIR solar reflectance.