Stability of chitosan-a challenge for pharmaceutical and biomedical applications

A nanosilica-coated thread-based analytical device for nitrate and nitrite detection in food samples

A new microfluidic thread-based analytical device (μTAD) for nitrate and nitrite determination in food samples was developed. The cotton thread substrate was coated with nanosilica to increase its hydrophilicity and stability, and polylactic acid was applied to one end of the nanosilica-coated thread to constrain the fluid flow along the thread in one direction. Quantification of nitrate and nitrite was based on the modified Griess reaction, using sulfanilamide and N-(1-naphthyl) ethylenediamine as chromogenic reagents, and utilizing a distance-based detection technique. Linear responses were observed in a range of 4-25 mg L-1 (R2 = 0.9991) for nitrite and a range of 8-50 mg L-1 (R2 = 0.9989) for nitrate. The limits of detection for nitrite and nitrate were 1.5 and 3.1 mg L-1, respectively. The detection time was 5 min for nitrite analysis, and 7 min for nitrate analysis. The new method demonstrated good precision, accuracy, selectivity, and stability. The performance of the proposed μTAD for nitrite and nitrate determination in real food samples was comparable to that of the conventional UV-Vis spectrophotometric method. The proposed μTAD could serve as a simple, low-cost, and portable method for nitrite and nitrate detection in food samples.

A Multicomponent Microneedle Patch for the Delivery of Meloxicam for Veterinary Applications

This study evaluates the use of poly(vinyl alcohol), collagen, and chitosan blends for developing a microneedle patch for the delivery of meloxicam (MEL). Results confirm successful MEL encapsulation, structural integrity, and chemical stability even after ethylene oxide sterilization. Mechanical testing indicates the patch has the required properties for effective skin penetration and drug delivery, as demonstrated by load-displacement curves showing successful penetration of pig ear surfaces at 3N of normal load. In vitro imaging confirms the microneedle patch penetrates the pig's ear cadaver skin effectively and uniformly, with histological evaluation revealing the sustained presence and gradual degradation of microneedles within the skin. Additionally, in vitro drug diffusion experiments utilizing ballistic gel suggest that microneedles commence dissolution almost immediately upon insertion into the gel, steadily releasing the drug over 24 h. Furthermore, the microneedle patch demonstrates ideal drug release capabilities, achieving nearly 100% release of meloxicam content from a single patch within 18 h. Finally, in vivo studies using pigs demonstrate the successful dissolution and transdermal drug delivery efficacy of biodegradable microneedle patches delivering meloxicam in a porcine model, with over 70% of microneedles undergoing dissolution after 3 days. While low detectable meloxicam concentrations were observed in the bloodstream, high levels were detected in the ear tissue, confirming the release and diffusion of the drug from microneedles. This work highlights the potential of microneedle patches for controlled drug release in veterinary applications.

Synthesis, characterization and evaluation of in vitro potential antimicrobial efficiency of new chitosan hydrogels and their CuO nanocomposites

The phenomenon of microbial resistance and its resulting biofilms to traditional antibiotics is worsening over time. Therefore, the discovery of alternative substances that inhibit microbial activities through mechanisms different from those of known antibiotics requires attention. So, chitosan was crosslinked using different amounts of oxalyl dihydrazide yielding four novel hydrogels; ODHCs-I, ODHCs-II, ODHCs-III, and ODHCs-IV of crosslinking degree 12.17, 20.67, 31.67, and 43.17, respectively. Different amounts of CuO nanoparticles were impregnated into ODHCs-IV, obtaining ODHCs-IV/CuONPs-1 %, ODHCs-IV/CuONPs-3 % and ODHCs-IV/CuONPs-5 % composites. Their structure was emphasized using FTIR, SEM, XRD, TEM, EDX and elemental analysis. Their in vitro antimicrobial and anti-biofilm activities improved with increasing ODH and CuONPs content. ODHCs-IV exhibited minimal inhibition concentration (2 μg/mL) against S. pyogenes that was much lower than Vancomycin (3.9 μg/mL). ODHCs-IV/CuONPs-5 % displayed better inhibition performance than Vancomycin and Amphotericin B against Gram-positive-bacteria and fungi, respectively, and comparable one to that of Vancomycin against Gram-negative-bacteria. ODHCs-IV/CuONPs-5 % displayed much lower minimal biofilm inhibition concentrations (1.95 to 3.9 μg/mL) as compared with those of ODHCs-IV (7.81 and 15.63 μg/mL), against C. albicans, S. pyogenes, and K. pneumonia. ODHCs-IV/CuONPs-5 % composite is safe on normal human cells. Oxalyl dihydrazide and CuONPs amalgamated into chitosan in one formulation promoted its antimicrobial efficiency.

Nicardipine-chitosan nanoparticles alleviate thioacetamide-induced acute liver injury by targeting NFκB/NLRP3/IL-1β signaling in rats: Unraveling new roles beyond calcium channel blocking

Liver inflammatory diseases are marked by serious complications. Notably, nicardipine (NCD) has demonstrated anti-inflammatory properties, but its benefits in liver inflammation have not been studied yet. However, the therapeutic efficacy of NCD is limited by its short half-life and low bioavailability. Therefore, we aimed to evaluate the potential of NCD-loaded chitosan nanoparticles (ChNPs) to improve its pharmacokinetic profile and hepatic accumulation. Four formulations of NCD-ChNPs were synthesized and characterized. The optimal formulation (NP2) exhibited a mean particle diameter of 172.6 ± 1.94 nm, a surface charge of +25.66 ± 0.93 mV, and an encapsulation efficiency of 88.86 ± 1.17 %. NP2 showed good physical stability as a lyophilized powder over three months. It displayed pH-sensitive release characteristics, releasing 77.15 ± 5.09 % of NCD at pH 6 (mimicking the inflammatory microenvironment) and 52.15 ± 3.65 % at pH 7.4, indicating targeted release in inflamed liver tissues. Pharmacokinetic and biodistribution studies revealed that NCD-ChNPs significantly prolonged NCD circulation time and enhanced its concentration in liver tissues compared to plain NCD. Additionally, the study investigated the protective effects of NCD-ChNPs in thioacetamide-induced liver injury in rats by modulating the NFκB/NLRP3/IL-1β signaling axis. NCD-ChNPs effectively inhibited NFκB activation, reduced NLRP3 inflammasome activation, and subsequent release of IL-1β, which correlated with improved hepatic function and reduced inflammation and oxidative stress. These findings highlight the potential of NCD-ChNPs as a promising nanomedicine strategy for the treatment of liver inflammatory diseases, warranting further investigation into their clinical applications, particularly in hypertensive patients with liver inflammatory conditions.

Chemical bonding of cross-linked glutaraldehyde/chitosan on the surface of a titanium wire to prepare a robust biocompatible SPME fiber for analysis of phytohormones in plants

A robust biocompatible solid-phase microextraction (SPME) fiber, so-called Ti/APTS/GA/CS, was prepared by chemical bonding of cross-linked glutaraldehyde-chitosan to the surface of a titanium wire using APTS. The fiber was applied for sampling of phytohormones in plant tissues, followed by HPLC-UV analysis. The structure and morphology of the fiber coating was investigated by FT-IR, SEM, EDX, XRD, and TGA techniques. A Box-Behnken design was implemented to optimize the experimental variables. The calibration graphs were linear over a wide linear range (0.5-200 μg L-1) with LODs over the range of 0.01-0.06 μg L-1. The intra-day and inter-day precisions were found to be 1.3-6.3% and 4.3-7.3%, respectively. The matrix effect values ranged from 86.5% to 111.7%, indicating that the complex sample matrices had an insignificant effect on the determination of phytohormones. The fiber was successfully employed for the direct-immersion SPME (DI-SPME-HPLC) analysis of the phytohormones in cucumber, tomato, date palm, and calendula samples.

Chitosan-based biomaterial delivery strategies for hepatocellular carcinoma

Background

Hepatocellular carcinoma accounts for 80% of primary liver cancers, is the most common primary liver malignancy. Hepatocellular carcinoma is the third leading cause of tumor-related deaths worldwide, with a 5-year survival rate of approximately 18%. Chemotherapy, although commonly used for hepatocellular carcinoma treatment, is limited by systemic toxicity and drug resistance. Improving targeted delivery of chemotherapy drugs to tumor cells without causing systemic side effects is a current research focus. Chitosan, a biopolymer derived from chitin, possesses good biocompatibility and biodegradability, making it suitable for drug delivery. Enhanced chitosan formulations retain the anti-tumor properties while improving stability. Chitosan-based biomaterials promote hepatocellular carcinoma apoptosis, exhibit antioxidant and anti-inflammatory effects, inhibit tumor angiogenesis, and improve extracellular matrix remodeling for enhanced anti-tumor therapy.

Methods

We summarized published experimental papers by querying them.

Results and Conclusions

This review discusses the physicochemical properties of chitosan, its application in hepatocellular carcinoma treatment, and the challenges faced by chitosan-based biomaterials.

Films based on TEMPO-oxidized chitosan nanoparticles: Obtaining and potential application as wound dressings

A series of novel films based on TEMPO-oxidized chitosan nanoparticles were prepared by casting method. Fourier transform infrared spectroscopy (FTIR) was employed to ascertain the chemical structure of TEMPO-oxidized chitosan. The surface morphology of the TEMPO-oxidized chitosan nanoparticles was analyzed by atomic force microscopy (AFM). The physicochemical (area density, thickness, iodine sorption, roughness), functional (moisture sorption, liquid absorption capacity, weight loss upon contact with the liquid, and water vapor transmission rate), antibacterial, and antioxidant properties of films based on TEMPO-oxidized chitosan nanoparticles were also investigated. The physicochemical properties of the films varied widely: area density ranged from 77.83 ± 0.06 to184.46 ± 0.05 mg/cm2, thickness varied between 80.5 ± 1.6 and 200.5 ± 1.6 μm, iodine sorption spanned from 333.7 ± 2.1 to166.4 ± 2.2 mg I2/g, and roughness ranged from 4.1 ± 0.2 to 5.6 ± 0.3 nm. Similarly, the functional properties also varied significantly: moisture sorption ranged from 4.76 ± 0.03 to 9.62 ± 0.11 %, liquid absorption capacity was between 129.04 ± 0.24 and 159.33 ± 0.73 % after 24 h, weight loss upon contact with the liquid varied between 31.06 ± 0.35 and 45.88 ± 0.58 % after 24 h and water vapor transmission rate ranged from 1220.10 ± 2.91to1407.77 ± 5.22 g/m2 day. Despite the wide variations in physicochemical and functional properties, all films showed maximum bacterial reduction of Staphylococcus aureus and Escherichia coli, although they exhibited low antioxidant activity. The results suggest that the films could be effectively utilized as antibacterial wound dressings.

Lysosomal Activation Mediated by Endocytosis in J774 Cell Culture Treated with N-Trimethyl Chitosan Nanoparticles

Safety and effectiveness are the cornerstone objectives of nanomedicine in developing nanotherapies. It is crucial to understand the biological interactions between nanoparticles and immune cells. This study focuses on the manufacture by the microfluidic technique of N-trimethyl chitosan/protein nanocarriers and their interaction with J774 cells to elucidate the cellular processes involved in absorption and their impact on the immune system, mainly through endocytosis, activation of lysosomes and intracellular degradation. TEM of the manufactured nanoparticles showed spherical morphology with an average diameter ranging from 36 ± 16 nm to 179 ± 92 nm, depending on the concentration of the cargo protein (0, 12, 55 μg/mL). FTIR showed the crosslinking between N-trimethyl chitosan and the sodium tripolyphosphate and the α-helix binding loss of BSA. TGA revealed an increase in the thermal stability of N-trimethyl chitosan/protein nanoparticles compared with the powder. The encapsulation of the cargo protein used was demonstrated using XPS. Their potential to improve cell permeability and use as nanocarriers in future vaccine formulations was demonstrated. The toxicity of the nanoparticles in HaCaT and J774 cells was studied, as well as the importance of evaluating the differentiation status of J774 cells. Thus, possible endocytosis pathways and their impact on the immune response were discussed. This allowed us to conclude that N-trimethyl chitosan nanoparticles show potential as carriers for the immune system. Still, more studies are required to understand their effectiveness and possible use in therapies.

Linum usitatissimum Delivery over Chitosan Nanobiopolymer: Enhanced Effects on Polycystic Ovary Syndrome Condition

Herein, chitosan nanoparticle (CHIT) was used as a safe and biocompatible matrix to carry flaxseed (Linum usitatissimum L.) extract (FSE). The number of main features and bio-interface properties of CHIT-FSE were determined by SEM, DLS, FTIR, XRD, TGA, and zeta potential analyses and compared to those of chitosan lacking FSE. A GC-MS analysis was also conducted to reveal the bioactive compounds of FSE. The active anchoring of the FSE phytomolecules over chitosan nanoparticles with enhanced thermal and structural stability was correspondingly verified. Subsequently, the influence of CHIT-FSE, CHIT-TPP, and FSE supplementation was assessed on hormonal and biochemical markers of polycystic ovary syndrome (PCOS) in female rats and compared with untreated and healthy control groups. After 16 days of treatment, CHIT-FSE represented the best performance for controlling the serum levels of the studied biochemical (lipid profile and blood glucose level) and hormonal (insulin, testosterone, luteinizing, and follicle-stimulating hormone) parameters. Considering the negligible therapeutic activity of CHIT-TPP, the enhanced activity of CHIT-FSE compared to only FSE was expounded based on the potent action of chitosan nanoparticles in enhanced stabilization, bioavailability, transport, and permeability of the therapeutically important phytomolecules. As per the results of this investigation, supporting medically important biomolecules over chitosan can enhance their therapeutic effectiveness in controlling PCOS.

Current and Future Perspectives of Bioactive Glasses as Injectable Material

This review covers recent compositions of bioactive glass, with a specific emphasis on both inorganic and organic materials commonly utilized as matrices for injectable materials. The major objective is to highlight the predominant bioactive glass formulations and their clinical applications in the biomedical field. Previous studies have highlighted the growing interest among researchers in bioactive glasses, acknowledging their potential to yield promising outcomes in this field. As a result of this increased interest, investigations into bioactive glass have prompted the creation of composite materials and, notably, the development of injectable composites as a minimally invasive method for administering the material within the human body. Injectable materials have emerged as a promising avenue to mitigate various challenges. They offer several advantages, including minimizing invasive surgical procedures, reducing patient discomfort, lowering the risk of postoperative infection and decreasing treatment expenses. Additionally, injectable materials facilitate uniform distribution, allowing for the filling of defects of any shape.

Research Advances of Lipid Nanoparticles in the Treatment of Colorectal Cancer

Colorectal cancer (CRC) is a common type of gastrointestinal tract (GIT) cancer and poses an enormous threat to human health. Current strategies for metastatic colorectal cancer (mCRC) therapy primarily focus on chemotherapy, targeted therapy, immunotherapy, and radiotherapy; however, their adverse reactions and drug resistance limit their clinical application. Advances in nanotechnology have rendered lipid nanoparticles (LNPs) a promising nanomaterial-based drug delivery system for CRC therapy. LNPs can adapt to the biological characteristics of CRC by modifying their formulation, enabling the selective delivery of drugs to cancer tissues. They overcome the limitations of traditional therapies, such as poor water solubility, nonspecific biodistribution, and limited bioavailability. Herein, we review the composition and targeting strategies of LNPs for CRC therapy. Subsequently, the applications of these nanoparticles in CRC treatment including drug delivery, thermal therapy, and nucleic acid-based gene therapy are summarized with examples provided. The last section provides a glimpse into the advantages, current limitations, and prospects of LNPs in the treatment of CRC.

Novel Biological-Based Strategy for Synthesis of Green Nanochitosan and Copper-Chitosan Nanocomposites: Promising Antibacterial and Hematological Agents

Two novel samples of nanoparticles based on chitosan were greenly synthesized using pomegranate peel extract. The extract served as a nanoparticle precursor, facilitating the precipitation of nanosized chitosan through the ionic gelation method. Additionally, by mixing the green chitosan nanoparticles with copper ions, a nanoscale composite of chitosan and copper oxide was also produced. Structural and morphological investigations (FTIR, XRD, SEM, EDX, and TGA analyses) were performed for greenly synthesized chitosan nanoparticles and their copper oxide composite to determine all the significant characteristics of those nanoparticles. In addition, both samples were tested using some biological investigations, such as antimicrobial activity and hematological effects. The antimicrobial tests yielded promising results for both the green chitosan nanoparticles and the CuO composite when tested using two bacterial strains and two fungal strains. Moreover, the results showed that using a similar concentration of both green-based chitosan samples resulted in a slightly larger inhibition zone and a lower minimum inhibition concentration (MIC) for the copper oxide chitosan composite compared to the chitosan nanoparticles for all microorganisms included in the test. The mean count of blood components (RBCs and platelets), clotting time, and cholesterol levels in three different blood samples were used to indicate the hematological activity of both greenly synthesized nanoparticles. The results verified a slight reduction in blood component count after the addition of green chitosan nanoparticles, but the chitosan copper oxide composite did not have a noticeable effect on the three blood samples. The chitosan nanoparticles were able to cause a considerable reduction in clotting time and cholesterol levels for all blood samples, thus acting as procoagulants. However, the mixing of CuO with chitosan nanoparticles prolonged the rate of clotting in blood samples from hypercholesteremic individuals, and thus, the mixture acted as an anticoagulant agent.

Exploiting specific properties of squid pens for the preparation of oligochitosan hydrochloride

Herein, we describe in first the application of squid pens for the preparation of pharmaceutical-grade oligochitosan hydrochloride with the physicochemical characteristics corresponding with the requirements of the European Pharmacopoeia. It is shown that the use of specific properties of squid pens as a source of parent chitosan allows preparing the product with a high yield at relatively moderate process conditions used for squid pens treatments and chitosan depolymerization.

Physicochemical and thermal characterization of the edible shellac films incorporated with oleic acid to enhance flexibility, water barrier and retard aging

In this work, shellac plasticized with oleic acid was solvent cast to prepare the flexible and water-resistant film for packaging applications. The films were prepared with varying amounts of oleic acid and studied in detail for appearance, surface morphology, thermal, chemical, barrier, mechanical, and robustness. The surface morphology confirmed the smooth surface of films up to SH-OA20 (100:20 w/w; shellac: oleic acid). Fourier-transform infrared spectroscopy confirmed that oleic acid reduced the hydrogen bonding of the shellac matrix to provide a plasticization effect. Also, the thermal analysis showed a reduction in the melting enthalpy. Moreover, the plasticized films had a better barrier to water vapor due to increased smoothness and reduction in brittleness. Adding oleic acid also increased the elongation at break up to 40 % without any changes in tensile strength. The flexibility of the films increased with the oleic acid content, making them resistant to burst, crumbling, bending, rolling, and stretching. Oleic acid also showed the retardation of aging and thermal aging of shellac. In the future, the long-term stability and migration of the films can be investigated.

Chitosan/Alginate-Based Nanoparticles for Antibacterial Agents Delivery

Nanoparticle systems integrating alginate and chitosan emerge as a promising avenue to tackle challenges in leveraging the potency of pharmacological active agents. Owing to their intrinsic properties as polysaccharides, alginate and chitosan, exhibit remarkable biocompatibility, rendering them conducive to bodily integration. By downsizing drug particles to the nano-scale, the system enhances drug solubility in aqueous environments by augmenting surface area. Additionally, the system orchestrates extended drug release kinetics, aligning well with the exigencies of chronic drug release requisite for antibacterial therapeutics. A thorough scrutiny of existing literature underscores a wealth of evidence supporting the utilization of the alginate-chitosan nanoparticle system for antibacterial agent delivery. Literature reviews present abundant evidence of the utilization of nanoparticle systems based on a combination of alginate and chitosan for antibacterial agent delivery. Various experiments demonstrate enhanced antibacterial efficacy, including an increase in the inhibitory zone diameter, improvement in the minimum inhibitory concentration, and an enhancement in the bacterial reduction rate. This enhancement in efficacy occurs due to mechanisms involving increased solubility resulting from particle size reduction, prolonged release effects, and enhanced selectivity towards bacterial cell walls, stemming from ionic interactions between positively charged particles and teichoic acid on bacterial cell walls. However, clinical studies remain limited, and there are currently no marketed antibacterial drugs utilizing this system. Hence, expediting clinical efficacy validation is crucial to maximize its benefits promptly.

A, Alkhamiss AS, Hamad RS, Abdel-Reheim MA, Ellethy AT, Elsisi HA, Alsharidah M, Elghandour SR, Elnawawy T, Abdelhady R. Hedgehog signaling is a promising target for the treatment of hepatic fibrogenesis: a new management strategy using itraconazole-loaded nanoparticles

Liver fibrosis is a disease with a great global health and economic burden. Existing data highlights itraconazole (ITRCZ) as a potentially effective anti-fibrotic therapy. However, ITRCZ effect is hindered by several limitations, such as poor solubility and bioavailability. This study aimed to formulate and optimize chitosan nanoparticles (Cht NPs) loaded with ITRCZ as a new strategy for managing liver fibrosis. ITRCZ-Cht NPs were optimized utilizing a developed 22 full factorial design. The optimized formula (F3) underwent comprehensive in vitro and in vivo characterization. In vitro assessments revealed that F3 exhibited an entrapment efficiency of 89.65% ± 0.57%, a 169.6 ± 1.77 nm particle size, and a zeta potential of +15.93 ± 0.21 mV. Furthermore, in vitro release studies indicated that the release of ITRCZ from F3 adhered closely to the first-order model, demonstrating a significant enhancement (p-value < 0.05) in cumulative release compared to plain ITRCZ suspension. This formula increased primary hepatocyte survival and decreased LDH activity in vitro. The in vivo evaluation of F3 in a rat model of liver fibrosis revealed improved liver function and structure. ITRCZ-Cht NPs displayed potent antifibrotic effects as revealed by the downregulation of TGF-β, PDGF-BB, and TIMP-1 as well as decreased hydroxyproline content and α-SMA immunoexpression. Anti-inflammatory potential was evident by reduced TNF-α and p65 nuclear translocation. These effects were likely ascribed to the modulation of Hedgehog components SMO, GLI1, and GLI2. These findings theorize ITRCZ-Cht NPs as a promising formulation for treating liver fibrosis. However, further investigations are deemed necessary.

LL37 Microspheres Loaded on Activated Carbon-chitosan Hydrogel: Anti-bacterial and Anti-toxin Wound Dressing for Chronic Wound Infections

Antimicrobial peptide LL37 is a promising antibacterial candidate due to its potent antimicrobial activity with no known bacterial resistance. However, intrinsically LL37 is susceptible to degradation in wound fluids limits its effectiveness. Bacterial toxins which are released after cell lysis are found to hinder wound healing. To address these challenges, encapsulating LL37 in microspheres (MS) and loading the MS onto activated carbon (AC)-chitosan (CS) hydrogel. This advanced wound dressing not only protects LL37 from degradation but also targets bacterial toxins, aiding in the healing of chronic wound infections. First, LL37 MS and LL37-AC-CS hydrogel were prepared and characterised in terms of physicochemical properties, drug release, and peptide-polymer compatibility. Antibacterial and antibiofilm activity, bacterial toxin elimination, cell migration, and cell cytotoxicity activities were investigated. LL37-AC-CS hydrogel was effective against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. LL37-AC-CS hydrogel bound more endotoxin than AC with CS hydrogel alone. The hydrogel also induced cell migration after 72 h and showed no cytotoxicity towards NHDF after 72 h of treatment. In conclusion, the LL37-AC-CS hydrogel was shown to be a stable, non-toxic advanced wound dressing method with enhanced antimicrobial and antitoxin activity, and it can potentially be applied to chronic wound infections to accelerate wound healing.

Characterization of Chitosan Hydrogels Obtained through Phenol and Tripolyphosphate Anionic Crosslinking

Chitosan is a deacetylated polymer of chitin that is extracted mainly from the exoskeleton of crustaceans and is the second-most abundant polymer in nature. Chitosan hydrogels are preferred for a variety of applications in bio-related fields due to their functional properties, such as antimicrobial activity and wound healing effects; however, the existing hydrogelation methods require toxic reagents and exhibit slow gelation times, which limit their application in biological fields. Therefore, a mild and rapid gelation method is necessary. We previously demonstrated that the visible light-induced gelation of chitosan obtained through phenol crosslinking (ChPh) is a rapid gelation method. To further advance this method (<10 s), we propose a dual-crosslinked chitosan hydrogel obtained by crosslinking phenol groups and crosslinking sodium tripolyphosphate (TPP) and the amino groups of chitosan. The chitosan hydrogel was prepared by immersing the ChPh hydrogel in a TPP solution after phenol crosslinking via exposure to visible light. The physicochemical properties of the dual-crosslinked hydrogels, including Young's moduli and water retentions, were subsequently investigated. Young's moduli of the dual-crosslinked hydrogels were 20 times higher than those of the hydrogels without TPP ion crosslinking. The stiffness could be manipulated by varying the immersion time, and the water retention properties of the ChPh hydrogel were improved by TPP crosslinking. Ion crosslinking could be reversed using an iron chloride solution. This method facilitates chitosan hydrogel use for various applications, particularly tissue engineering and drug delivery.

Synthesis and characterization of chitosan for medical applications: A review

Chitosan has gained considerable recognition within the field of medical applications due to its exceptional biocompatibility and diverse range of properties. Nevertheless, prior reviews have primarily focused on its applications, offering limited insights into its source materials. Hence, there arises a compelling need for a comprehensive review that encompasses the entire chitin and chitosan life cycle: from the source of chitin and chitosan, extraction methods, and specific medical applications, to the various techniques employed in evaluating chitosan's properties. This all-encompassing review delves into the critical aspects of chitin and chitosan extraction, with a strong emphasis on the utilization of natural raw materials. It elucidates the various sources of these raw materials, highlighting their abundance and accessibility. Furthermore, a meticulous examination of extraction methods reveals the prevalent use of hydrochloric acid (HCl) in the demineralization process, alongside citric, formic, and phosphoric acids. Based on current review information, these acids constitute a substantial 69.2% of utilization, surpassing other mentioned acids. Of notable importance, the review underscores the essential parameters for medical-grade chitosan. It advocates for a degree of deacetylation (DDA) falling within the range of 85%-95%, minimal protein content <1%, ash content <2%, and moisture content <10%. In conclusion, these crucial factors contribute to the understanding of Chitosan's production for medical applications, paving the way for advancements in biomedical research and development.

Highly efficient and reusable CuAu nanoparticles supported on crosslinked chitosan hydrogels as a plasmonic catalyst for nitroarene reduction

The synthesis of CuAu-based monometallic (MNPs) and bimetallic nanoparticles (BNPs) supported on chitosan-based hydrogels for their application as catalysts is presented. The hydrogels consisted of chitosan chains cross-linked with tripolyphosphate (TPP) in the form of beads with an approximate average diameter of 1.81 mm. The MNPs and BNPs were obtained by the adsorption of metallic ions and their subsequent reduction with hydrazine, achieving a metallic loading of 0.297 mmol per gram of dry sample, with average nanoparticle sizes that were found between 2.6 and 4.4 nm. Both processes, metal adsorption and the stabilization of the nanoparticles, are mainly attributed to the participation of chitosan hydroxyl, amine and amide functional groups. The materials revealed important absorption bands in the visible region of the light spectra, specifically between 520 and 590 nm, mainly attributed to LSPR given the nature of the MNPs and BNPs inside the hydrogels. Subsequently, the hydrogels were evaluated as catalysts against the reduction of 4-nitrophenol (4NP) into 4-aminophenol (4AP), followed by UV-visible spectroscopy. The kinetic advance of the reaction revealed important improvements in the catalytic activity of the materials by synergistic effect of BNPs and plasmonic enhancement under visible light irradiation, given the combination of metals and the light harvesting properties of the nanocomposites. Finally, the catalytic performance of hydrogels containing BNPs CuAu 3:1 showed an important selectivity, recyclability and reusability performance, due to the relevant interaction of the BNPs with the chitosan matrix, highlighting the potential of this nanocomposite as an effective catalyst, with a potential environmental application.

Alveolar ridge preservation in rat tooth extraction model by chitosan-derived epigenetic modulation scaffold

PURPOSE

Alveolar ridge preservation is a surgical technique used to prevent dimensional changes in the alveolar bone by dressing biomaterials in the extraction socket. Recently, a chitosan biphasic calcium phosphate loaded with trichostatin A (CS/BCP/TSA) scaffold was introduced as an excellent bone-regeneration material. This study aimed to explore the biological properties of released trichostatin A (TSA) and evaluate the potential of the CS/BCP/TSA scaffold in preserving the alveolar ridge in a rat tooth extraction model.

METHODS

In vitro biocompatibility, histone deacetylase (HDAC) activity, and osteogenic differentiation of MC3T3-E1 cells were tested. For in vivo studies, the maxillary first molars (M1) of Wistar rats were extracted, and alveolar ridge preservation was performed using a CS/BCP/TSA scaffold or commercial bone graft. Micro-Computed Tomography (micro-CT), polyfluorochrome labeling, and histological analysis were used to evaluate the ridge-preservation ability.

RESULTS

The released TSA was cytocompatible. Inhibition of histone deacetylase (HDAC) activity and induction of osteogenic differentiation in MC3T3-E1 cells were confirmed. The socket dressing with the CS/BCP/TSA scaffold showed increased socket bone fill and preserved the buccal and middle aspects of the alveolar ridge compared with the conventional graft. Further analysis of the bone regeneration ability by histomorphometric and histological analyses demonstrated that CS/BCP/TSA showed a significantly higher potential to induce bone formation and complete healing in the extraction socket than the other groups.

CONCLUSIONS

The CS/BCP/TSA scaffold is a novel candidate for alveolar ridge preservation.

Ozonated Sunflower Oil Embedded within Spray-Dried Chitosan Microspheres Cross-Linked with Azelaic Acid as a Multicomponent Solid Form for Broad-Spectrum and Long-Lasting Antimicrobial Activity

Multicomponent solid forms for the combined delivery of antimicrobials can improve formulation performance, especially for poorly soluble drugs, by enabling the modified release of the active ingredients to better meet therapeutic needs. Chitosan microspheres incorporating ozonated sunflower oil were prepared by a spray-drying method and using azelaic acid as a biocompatible cross-linker to improve the long time frame. Two methods were used to incorporate ozonated oil into microspheres during the atomization process: one based on the use of a surfactant to emulsify the oil and another using mesoporous silica as an oil absorbent. The encapsulation efficiency of the ozonated oil was evaluated by measuring the peroxide value in the microspheres, which showed an efficiency of 75.5-82.1%. The morphological aspects; particle size distribution; zeta potential; swelling; degradation time; and thermal, crystallographic and spectroscopic properties of the microspheres were analyzed. Azelaic acid release and peroxide formation over time were followed in in vitro analyses, which showed that ozonated oil embedded within chitosan microspheres cross-linked with azelaic acid is a valid system to obtain a sustained release of antimicrobials. In vitro tests showed that the microspheres exhibit synergistic antimicrobial activity against P. aeruginosa, E. coli, S. aureus, C. albicans and A. brasiliensis. This makes them ideal for use in the development of biomedical devices that require broad-spectrum and prolonged antimicrobial activity.

Preparation and Optimization of MiR-375 Nano-Vector Using Two Novel Chitosan-Coated Nano-Structured Lipid Carriers as Gene Therapy for Hepatocellular Carcinoma

Currently, there is still a lack of effective carriers with minimal side effects to deliver therapeutic miRNA. Thus, it is crucial to optimize novel drug delivery systems. MiR-375 has proven superior therapeutic potency in Hepatocellular carcinoma (HCC). The purpose of this study was to fabricate 2 novel and smart nano-carriers for the transportation efficiency of miR-375 in HCC cells and enhance its anti-tumor effects. We established the miR-375 construct through the pEGP- miR expression vector. Two nano-carriers of solid/liquid lipids and chitosan (CS) were strategically selected, prepared by high-speed homogenization, and optimized by varying nano-formulation factors. Thus, the two best nano-formulations were designated as F1 (0.5% CS) and F2 (1.5% CS) and were evaluated for miR-375 conjugation efficiency by gel electrophoresis and nanodrop assessment. Then, physio-chemical characteristics and stability tests for the miR-375 nano-plexes were all studied. Next, its efficiencies as replacement therapy in HepG2 cells have been assessed by fluorescence microscopy, flow cytometry, and cytotoxicity assay. The obtained data showed that two cationic nanostructured solid/liquid lipid carriers (NSLCs); F1 and F2 typically had the best physio-chemical parameters and long-term stability. Moreover, both F1 and F2 could form nano-plexes with the anionic miR-375 construct at weight ratios 250/1 and 50/1 via electrostatic interactions. In addition, these nano-plexes exhibited physical stability after three months and protected miR-375 from degradation in the presence of 50% fetal bovine serum (FBS). Furthermore, both nano-plexes could simultaneously deliver miR-375 into HepG2 cells and they ensure miR re-expression even in the presence of 50% FBS compared to free miR-375 (p-value < 0.001). Moreover, both F1 and F2 alone significantly exhibited minimal cytotoxicity in treated cells. In contrast, the nano-plexes significantly inhibited cell growth compared to free miR-375 or doxorubicin (DOX), respectively. More importantly, F2/miR-375 nano-plex exhibited more anti-proliferative activity in treated cells although its IC50 value was 55 times lower than DOX (p-value < 0.001). Collectively, our findings clearly emphasized the multifunctionality of the two CS-coated NSLCs in terms of their enhanced biocompatibility, biostability, conjugation, and transfection efficiency of therapeutic miR-375. Therefore, the NSLCs/miR-375 nano-plexes could serve as a novel and promising therapeutic strategy for HCC.

Oral nanotherapeutic formulation of insulin with reduced episodes of hypoglycaemia

Injectable insulin is an extensively used medication with potential life-threatening hypoglycaemic events. Here we report on insulin-conjugated silver sulfide quantum dots coated with a chitosan/glucose polymer to produce a responsive oral insulin nanoformulation. This formulation is pH responsive, is insoluble in acidic environments and shows increased absorption in human duodenum explants and Caenorhabditis elegans at neutral pH. The formulation is sensitive to glucosidase enzymes to trigger insulin release. It is found that the formulation distributes to the liver in mice and rats after oral administration and promotes a dose-dependent reduction in blood glucose without promoting hypoglycaemia or weight gain in diabetic rodents. Non-diabetic baboons also show a dose-dependent reduction in blood glucose. No biochemical or haematological toxicity or adverse events were observed in mice, rats and non-human primates. The formulation demonstrates the potential to orally control blood glucose without hypoglycaemic episodes.

Microwave-assisted synthesis of crosslinked ureido chitosan for hemostatic applications

In this study, we present a facile method for introducing hydrophilic ureido groups (NH2-CO-NH-) into chitosan using a microwave-assisted reaction with molten urea, with the aim of enhancing chitosan's interaction with blood components for improved hemostasis. The formation of the ureido groups through nucleophilic addition reaction between the amine groups in chitosan and in situ generated isocyanic acid was confirmed by FTIR, CP/TOSS 13C NMR, and CP/MAS 15N NMR spectroscopic techniques. However, in stark contrast to the glucans, the said modification introduced extensive crosslinking in chitosan. Spectroscopic studies identified these crosslinks as carbamate bridges (-NH-COO-), which were likely formed by the reaction between the ureido groups and hydroxyl groups of adjacent chains through an isocyanate intermediate. These carbamate bridges improved ureido chitosan's environmental stability, making it particularly resistant to changes in pH and temperature. In comparison to chitosan, the crosslinked ureido chitosan synthesized here exhibited good biocompatibility and cell adhesion, rapidly arrested the bleeding in a punctured artery with minimal hemolysis, and induced early activation and aggregation of platelets. These properties render it an invaluable material for applications in hemostasis, particularly in scenarios that necessitate stability against pH variations and degradation.

Chitosan Poly(vinyl alcohol) Methacrylate Hydrogels for Tissue Engineering Scaffolds

A major challenge in tissue engineering scaffolds is controlling scaffold degradation rates during healing while maintaining mechanical properties to support tissue formation. Hydrogels are three-dimensional matrices that are widely applied as tissue scaffolds based on their unique properties that can mimic the extracellular matrix. In this study, we develop a hybrid natural/synthetic hydrogel platform to tune the properties for tissue engineering scaffold applications. We modified chitosan and poly(vinyl alcohol) (PVA) with photo-cross-linkable methacrylate functional groups and then synthesized a library of chitosan PVA methacrylate hydrogels (ChiPVAMA) with two different photoinitiators, Irgacure 2959 (I2959) and lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP). ChiPVAMA hydrogels showed tunability in degradation rates and mechanical properties based on both the polymer content and photoinitiator type. This tunability could enable their application in a range of tissue scaffold applications. In a 2D scratch wound healing assay, all hydrogel samples induced faster wound closure compared to a gauze clinical wound dressing control. NIH/3T3 cells encapsulated in hydrogels showed a high viability (∼92%) over 14 days, demonstrating the capacity of this system as a supportive cell scaffold. In addition, hydrogels containing a higher chitosan content demonstrated a high antibacterial capacity. Overall, ChiPVAMA hydrogels provide a potential tissue engineering scaffold that is tunable, degradable, and suitable for cell growth.

Utilization of nanotechnology and experimental design in the development and optimization of a posaconazole‒calendula oil nanoemulgel for the treatment of mouth disorders

Introduction: Essential oil‒based nanoemulsions (NEs) are the subjects of extensive investigation due to their potential to address a variety of oral health issues. NEs are delivery systems that improve lipid medicine solubility and distribution to intended sites. The goal of the current study was to create and enhance a self-nanoemulsifying drug delivery paradigm based on calendula oil (CO) and decorated with chitosan (CS) that could deliver posaconazole (PSZ) for the treatment of gingivitis. Method: Employing a response-surface Box‒Behnken design, PSZ-CO-CS NEs were created with varying amounts of PSZ (10, 15, and 20 mg), percentages of CO (6%, 12%, and 18%), and percentages of CS (0.5%, 1.5%, and 2.5%). Results and conclusion: The optimized formulation resulted in a 22-mm bacterial growth suppression zone, 25-mm fungal growth inhibition zone, droplet sizes of 110 nm, and a viscosity of 750 centipoise (cP). Using the appropriate design, the ideal formulation was produced; it contained 20 mg of PSZ, 18% of CO, and 1.35% of CS. Furthermore, the optimal formulation had a more controlled drug release, larger inhibition zones of bacterial and fungal growth, and desirable rheologic properties. Additionally, the optimized formulation substantially lowered the ulcer index in rats when tested against other formulations. Thus, this investigation showed that PSZ-CO-CS NEs could provide efficient protection against microbially induced gingivitis.

Unveiling a pH-Responsive Dual-Androgen-Blocking Magnetic Molecularly Imprinted Polymer for Enhanced Synergistic Therapy of Prostate Cancer

Prostate cancer is the most common malignancy diagnosed in men. Androgens are directly related to its pathogenesis. Inhibition of the androgen receptor (AR) is considered to be the most promising therapeutic approach for the treatment of prostate cancer. In this study, a new type of pH-responsive dual androgen-blocking nanodrug (FASC MIPs) based on a molecularly imprinted polymer has been designed and synthesized. The nanodrug could selectively sequester testosterone from the prostate tumor through specific molecular imprinting sites and simultaneously deliver the AR inhibitory drug bicalutamide, which ultimately leads to enhanced synergistic therapy of prostate cancer. FASC MIPs demonstrate excellent pH responsiveness in a simulated tumor microenvironment due to the presence of chitosan and significantly inhibit the growth of prostate cancer cells (LNCaP cells) by blocking the G1 phase of cytokinesis. Additionally, the nanodrug also displayed excellent antitumor properties in a xenograft mouse model of prostate cancer without any sign of detrimental effects on healthy tissues and organs. Both in vitro and in vivo studies verified the augmented and synergistic therapeutic effects of FASC MIPs, and the proposed dual-androgen-blocking strategy could explore novel avenues in prostate cancer treatment.

pH stimulus-responsive hybrid nanoparticles: A system designed for follicular delivery of brazilian plant-derived 5-alpha-reductase enzyme inhibitors

The 5-alpha-reductase enzyme, present in pilosebaceous units, plays a crucial role in the appearance of cutaneous hyperandrogenism manifestations (hirsutism, acne, and androgenetic alopecia). Its inhibition is an excellent strategy to reverse these conditions. Given the limitations of existing treatments, with transient effects and delayed therapeutic response, as well as the possibility of causing undesirable side effects, this study sought to develop new drug delivery systems to overcome these limitations. In other words, innovative stimuli-responsive hybrid nanoparticles were synthesized using silica/natural polysaccharides, encapsulating 5-alpha-reductase enzyme inhibitors derived from the plant Stryphnodendron adstringens (Mart.) Coville (commonly known as 'Barbatimão'). Silica core was synthesized by the modified Stöber method. The pH responsive polysaccharides used to coat the porous silica cores were chitosan, and sodium alginate, this coating was carried out using the Layer-by-Layer technique. The hybrid nanoparticles were characterized at molecular and physical-chemical levels. Furthermore, encapsulation efficiency, pH-dependent release behavior, and cytotoxicity were evaluated. Amorphous mesoporous structure with adequate size for follicular delivery (between 300 and 600 nm) in addition to effective phytocompound loading capacity, above 80 % was obtained. Based on the release studies, it was possible to observe pH responsiveness. The ethyl acetate fraction (EAF) obtained from "Barbatimão" bark extract was released in a controlled and more efficient manner by the alginate-coated nanoparticle (SNP_EAF_SA) at pH 7.4, which corresponds to the pH at the deepest area of hair follicles. Furthermore, SNP_EAF_SA proved to be less cytotoxic compared to EAF and chitosan-coated hybrid nanoparticles (SNP_EAF_CH). Characterization, release, and cytotoxicity results indicate that SNP_EAF_SA is a promising system for on-demand follicular delivery of antiandrogenic actives contained in EAF.

Optimize the parameters for the synthesis by the ionic gelation technique, purification, and freeze-drying of chitosan-sodium tripolyphosphate nanoparticles for biomedical purposes

BACKGROUND

Polymeric nanoparticles can be used for wound closure and therapeutic compound delivery, among other biomedical applications. Although there are several nanoparticle obtention methods, it is crucial to know the adequate parameters to achieve better results. Therefore, the objective of this study was to optimize the parameters for the synthesis, purification, and freeze-drying of chitosan nanoparticles. We evaluated the conditions of agitation speed, anion addition time, solution pH, and chitosan and sodium tripolyphosphate concentration.

RESULTS

Chitosan nanoparticles presented an average particle size of 172.8 ± 3.937 nm, PDI of 0.166 ± 0.008, and zeta potential of 25.00 ± 0.79 mV, at the concentration of 0.1% sodium tripolyphosphate and chitosan (pH 5.5), with a dripping time of 2 min at 500 rpm. The most representative factor during nanoparticle fabrication was the pH of the chitosan solution, generating significant changes in particle size and polydispersity index. The observed behavior is attributed to the possible excess of sodium tripolyphosphate during synthesis. We added the surfactants poloxamer 188 and polysorbate 80 to evaluate the stability improvement during purification (centrifugation or dialysis). These surfactants decreased coalescence between nanoparticles, especially during purification. The centrifugation increased the zeta potential to 40.8-56.2 mV values, while the dialyzed samples led to smaller particle sizes (152-184 nm). Finally, freeze-drying of the chitosan nanoparticles proceeded using two cryoprotectants, trehalose and sucrose. Both adequately protected the system during the process, and the sugar concentration depended on the purification process.

CONCLUSIONS

In Conclusion, we must consider each surfactant's benefits in formulations for selecting the most suitable. Also, it is necessary to do more studies with the molecule to load. At the same time, the use of sucrose and trehalose generates adequate protection against the freeze-drying process, even at a 5% w/v concentration. However, adjusting the percentage concentration by weight must be made to work with the CS-TPP NPs purified by dialysis.

Chitosan-based Schiff bases: Promising materials for biomedical and industrial applications

There is plenty of scope for modifying chitosan, an only polycationic natural polysaccharide, owing to its reactive functional groups, namely hydroxyl and amino groups. Although innumerable numbers of chitosan derivatives have been synthesized by modifying these groups and reported elsewhere, in this review article, an attempt has been exclusively made to demonstrate the syntheses of various chitosan-based Schiff bases (CSBs) simply by allowing the reactions of reactive amino groups of chitosan with different aldehydes/ketones of interest. Due to their very peculiar and unique characteristics, such as biodegradability, biocompatibility, metal-binding capability, etc., they are found to be very useful for diversified applications. Thus, we have also attempted to showcase their very specific biomedical fields, including tissue engineering, drug delivery, and wound healing, to name a few. In addition, we have also discussed the utilization of CSBs for industrial applications such as wastewater treatment, catalysis, corrosion inhibition, sensors, etc.

Green interconnected network structure of chitosan-microcrystalline cellulose-lignin biopolymer film for active packaging applications

As an excellent alternative to petroleum-based food packaging materials, a novel green hybrid composite film with an excellent interconnected network structure was successfully fabricated by integrating chitosan (chi), microcrystalline cellulose (MCC), and lignin nanoparticles (LNP), including the desired amount of plasticizer glycerol (gly). Overall, 36 combinations were developed and investigated for superior biocomposite film formation. Among the various concentration ratios, the 40:35:25 chi-MCC-gly film provided well-organized film formation, good physicochemical properties, mechanical stability, efficient water contact angle, reduced water solubility, and lower water vapor permeability (11.43 ± 0.55 × 10-11 g.m-1.s-1.Pa-1). The performance of the chi-MCC-gly film further enhanced by the homogeneous incorporation of ∼100 nm LNP. With 1 % LNP addition, the tensile strength of the film increased (28.09 MPa, 47.10 % increase) and the water vapor permeability reached a minimum of 11.43 × 10-11 g.m-1.s-1.Pa-1, which proved the impact of LNP in composite films. Moreover, the films showed excellent resistance to thermal shrinkage even at 100 °C and exhibited nearly 100 % UV blocking efficiency at higher LNP concentrations. Interestingly, the green composite films extended the shelf life of freshly cut cherry tomatoes to seven days without spoilage. Overall, the facile synthesis of strong, insoluble, UV-blocking, and thermally stable green composite films realized for food packaging applications.

Nuciferine-loaded chitosan hydrogel-integrated 3D-printed polylactic acid scaffolds for bone tissue engineering: A combinatorial approach

Critical-sized bone defects resulting from severe trauma and open fractures cannot spontaneously heal and require surgical intervention. Limitations of traditional bone grafting include immune rejection and demand-over-supply issues leading to the development of novel tissue-engineered scaffolds. Nuciferine (NF), a plant-derived alkaloid, has excellent therapeutic properties, but its osteogenic potential is yet to be reported. Furthermore, the bioavailability of NF is obstructed due to its hydrophobicity, requiring an efficient drug delivery system, such as chitosan (CS) hydrogel. We designed and fabricated polylactic acid (PLA) scaffolds via 3D printing and integrated them with NF-containing CS hydrogel to obtain the porous biocomposite scaffolds (PLA/CS-NF). The fabricated scaffolds were subjected to in vitro physicochemical characterization, cytotoxicity assays, and osteogenic evaluation studies. Scanning electron microscopic studies revealed uniform pore size distribution on PLA/CS-NF scaffolds. An in vitro drug release study showed a sustained and prolonged release of NF. The cyto-friendly nature of NF in PLA/CS-NF scaffolds towards mouse mesenchymal stem cells (mMSCs) was observed. Also, cellular and molecular level studies signified the osteogenic potential of NF in PLA/CS-NF scaffolds on mMSCs. These results indicate that the PLA/CS-NF scaffolds could promote new bone formation and have potential applications in bone tissue engineering.

Chitosan-based nanopesticides enhanced anti-fungal activity against strawberry anthracnose as "sugar-coated bombs"

A chitosan-based nanoparticle was prepared using chitosan (CS) and O-carboxymethyl chitosan (O-CMCS). Our study revealed that chitosan/O-carboxymethyl chitosan/tebuconazole nanoparticles (CS/O-CMCS/TBA NPs) exhibited superior antifungal activity, foliar adhesion, and microbial target adhesion performance compared to commercial suspension concentrate (SC). The antifungal activity of CS/O-CMCS/TBA NPs against C. gloeosporioides, with a 3.13-fold increase in efficacy over TBA (SC). We also found that low concentrations of CS/O-CMCS NPs promoted the growth of C. gloeosporioides and enhanced the fungal catabolism of chitosan. Overall, the CS/O-CMCS/TBA NPs were found to possess the remarkable capability to selectively aggregate around pathogenic microorganisms and CS/O-CMCS NPs can enhance the fungal catabolism of chitosan. CS/O-CMCS/TBA NPs, as a "sugar-coated bomb", was a promising asset for effective plant disease management and pesticide utilization through the affinity of chitosan-based nanoparticles and C. gloeosporioides, enabling targeted delivery and targeted release of their encapsulated active ingredient, which was important for the development and application of biocompatible chitosan-based nanopesticides.

Graphene Oxide-Polyphenylsulfone Nanocomposite Beads for Paracetamol Removal from Aqueous Solution

This study introduces a promising and practical method for the removal of paracetamol from aqueous environments, employing graphene oxide-polymer nanocomposite beads. The approach involves the utilization of a straightforward and facile phase inversion method, offering a convenient and efficient one-step process for the creation of adsorbent beads by integrating polymers and graphene oxide (GO). The synthesized nanocomposite beads are tailored for the removal of paracetamol from simulated wastewater in batch systems. Extensive characterization techniques including XPS, FTIR, SEM, TGA, and zeta potential analysis are employed to scrutinize the chemical properties and structural attributes of the prepared beads. The investigation explores the impact of critical parameters such as adsorbent dosage, adsorption duration, initial paracetamol concentration, and solution pH on the adsorption process. These nanocomposite beads exhibit an exceptional paracetamol removal efficiency, achieving up to 99% removal. This research not only contributes to the advancement of efficient and sustainable adsorbent materials for pollutant removal but also underscores their potential for environmentally friendly and cost-effective solutions in the domain of wastewater treatment.

Atrazine Degradation Using Immobilized Triazine Hydrolase from Arthrobacter aurescens TC1 in Mesoporous Silica Nanomaterials

Triazine hydrolase fromArthrobacter aurescens TC1 (TrzN) was successfully immobilized on mesoporous silica nanomaterials (MSNs) for the first time. For both nonfunctionalized MSNs and MSNs functionalized with Zn(II), three pore sizes were evaluated for their ability to immobilize wild-type TrzN: Mobile composition of matter no. 41 (small, 3 nm pores), mesoporous silica nanoparticle material with 10 nm pore diameter (MSN-10) (medium, 6-12 nm pores), and pore-expanded MSN-10 (large, 15-30 nm pores). Of these six TrzN:MSN biomaterials, it was shown that TrzN:MSN-10 was the most active (3.8 ± 0.4 × 10-5 U/mg) toward the hydrolysis of a 50 μM atrazine solution at 25 °C. The TrzN:MSN-10 biomaterial was then coated in chitosan (TrzN:MSN-10:Chit) as chitosan has been shown to increase stability in extreme conditions such as low/high pH, heat shock, and the presence of organic solvents. TrzN:MSN-10:Chit was shown to be a superior TrzN biomaterial to TrzN:MSN-10 as it exhibited higher activity under all storage conditions, in the presence of 20% MeOH, at low and high pH values, and at elevated temperatures up to 80 °C. Finally, the TrzN:MSN-10:Chit biomaterial was shown to be fully active in river water, which establishes it as a functional biomaterial under actual field conditions. A combination of these data indicate that the TrzN:MSN-10:Chit biomaterial exhibited the best overall catalytic profile making it a promising biocatalyst for the bioremediation of atrazine.

Molecular-Scale Exploration of Mechanical Properties and Interactions of Poly(lactic acid) with Cellulose and Chitin

Poly(lactic acid) (PLA), one of the pillars of the current overarching displacement trend switching from fossil- to natural-based polymers, is often used in association with polysaccharides to increase its mechanical properties. However, the use of PLA/polysaccharide composites is greatly hampered by their poor miscibility, whose underlying nature is still vastly unexplored. This work aims to shed light on the interactions of PLA and two representative polysaccharide molecules (cellulose and chitin) and reveal structure-property relationships from a fundamental perspective using atomistic molecular dynamics. Our computational strategy was able to reproduce key experimental mechanical properties of pure and/or composite materials, reveal a decrease in immiscibility in PLA/chitin compared to PLA/cellulose associations, assert PLA-oriented polysaccharide reorientations, and explore how less effective PLA-polysaccharide hydrogen bonds are related to the poor PLA/polysaccharide miscibility. The connection between the detailed chemical interactions and the composite behavior found in this work is beneficial to the discovery of new biodegradable and natural polymer composite mixtures that can provide needed performance characteristics.

Towards Polycaprolactone-Based Scaffolds for Alveolar Bone Tissue Engineering: A Biomimetic Approach in a 3D Printing Technique

The alveolar bone is a unique type of bone, and the goal of bone tissue engineering (BTE) is to develop methods to facilitate its regeneration. Currently, an emerging trend involves the fabrication of polycaprolactone (PCL)-based scaffolds using a three-dimensional (3D) printing technique to enhance an osteoconductive architecture. These scaffolds are further modified with hydroxyapatite (HA), type I collagen (CGI), or chitosan (CS) to impart high osteoinductive potential. In conjunction with cell therapy, these scaffolds may serve as an appealing alternative to bone autografts. This review discusses research gaps in the designing of 3D-printed PCL-based scaffolds from a biomimetic perspective. The article begins with a systematic analysis of biological mineralisation (biomineralisation) and ossification to optimise the scaffold's structural, mechanical, degradation, and surface properties. This scaffold-designing strategy lays the groundwork for developing a research pathway that spans fundamental principles such as molecular dynamics (MD) simulations and fabrication techniques. Ultimately, this paves the way for systematic in vitro and in vivo studies, leading to potential clinical applications.

Sustainable removal of phenol from wastewater using a biopolymer hydrogel adsorbent comprising crosslinked chitosan and κ-carrageenan

A biopolymer-based adsorbent comprising chitosan (CS) and κ-carrageenan (κ-Carr) was synthesised and evaluated to treat phenolic-contaminated water. The developed CS/κ-Carr hydrogel demonstrated excellent performance with a phenol adsorption uptake of 80 %. The morphologies of CS/κ-Carr hydrogels with different ratios of CS to κ-Carr ranging from 1:2 to 7:3 were characterised using scanning electron microscopy and atomic force microscopy; their chemical structures were investigated by spectral analyses using Fourier-transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry; their adsorption characteristics were determined using tests for swelling, chemical stability, hygroscopic moisture content, and hydrophilicity. Finally, a batch-type evaluation method demonstrated adsorption performance at 25 °C and pH 6.9. Adsorption isotherms and kinetic data were successfully obtained using the Freundlich and pseudo-second-order models, respectively. The results indicate that one-pot synthesis of an insoluble CS/κ-Carr hydrogel adsorbent exhibits considerable potential for the removal of phenol from aqueous solutions, providing an environmentally friendly technology enhancing the phenol adsorption performance of CS.

Recent Progress of the Vat Photopolymerization Technique in Tissue Engineering: A Brief Review of Mechanisms, Methods, Materials, and Applications

Vat photopolymerization (VP), including stereolithography (SLA), digital light processing (DLP), and volumetric printing, employs UV or visible light to solidify cell-laden photoactive bioresin contained within a vat in a point-by-point, layer-by-layer, or volumetric manner. VP-based bioprinting has garnered substantial attention in both academia and industry due to its unprecedented control over printing resolution and accuracy, as well as its rapid printing speed. It holds tremendous potential for the fabrication of tissue- and organ-like structures in the field of regenerative medicine. This review summarizes the recent progress of VP in the fields of tissue engineering and regenerative medicine. First, it introduces the mechanism of photopolymerization, followed by an explanation of the printing technique and commonly used biomaterials. Furthermore, the application of VP-based bioprinting in tissue engineering was discussed. Finally, the challenges facing VP-based bioprinting are discussed, and the future trends in VP-based bioprinting are projected.

Evaluation of bioactivity and biodegradability of a biomimetic soft tissue scaffold for clinical use: An in vitro study

Background

Autogenous soft-tissue graft is the gold-standard approach to augment oral soft tissues. However, tissue engineering is increasingly surveyed to overcome its substantial drawbacks, including the secondary site of operation, patient's pain and discomfort, limited tissue of donor site, and so on. Chitosan and gelatin have been utilized in this field over the years due to their great biological virtues. Zeolite, another remarkable candidate for tissue engineering, possesses outstanding biological and mechanical properties, thanks to its nanostructure. Therefore, this study aimed to investigate the biodegradability and DNA content of seeded human gingival fibroblasts on a New Chitosan-Gelatin-Zeolite Scaffold for the perspective of oral and mucosal soft tissue augmentation.

Materials and Methods

DNA contents of the human gingival fibroblast cell line (HGF.1) seeded on the chitosan-gelatin (CG) and CGZ scaffolds were evaluated by propidium iodide staining on days 1, 5, and 8. Scaffolds' biodegradations were investigated on days 1, 7, 14, 28, 42, and 60.

Results

Although both scaffolds provided appropriate substrates for HGF.1 growth, significantly higher DNA contents were recorded for the CGZ scaffold. Among experimental groups, the highest mean value was recorded in the CGZ on day 8. CGZ showed a significantly lower biodegradation percentage at all time points.

Conclusions

The incorporation of zeolite into the CG scaffold at a ratio of 1:10 improved the cell proliferation and stability of the composite scaffold. CGZ scaffold may offer a promising alternative to soft-tissue grafts due to its suitable biological features.

Effect of Time on the Properties of Bio-Nanocomposite Films Based on Chitosan with Bio-Based Plasticizer Reinforced with Nanofiber Cellulose

The deterioration of the performance of polysaccharide-based films over time, particularly their hydrophilicity and mechanical properties, is one of the main problems limiting their applications in the packaging industry. In the present study, we proposed to improve the performance of chitosan-based films through the use of: (1) nanocellulose as an additive to reduce their hydrophilic nature; (2) bio-based plasticizer to improve their mechanical properties; and (3) chestnut extract as an antimicrobial agent. To evaluate their stability over time, the properties of as-formed films (mechanical, hydrophilic, barrier and antibacterial) were studied immediately after preparation and after 7, 14 and 30 days. In addition, the morphological properties of the films were characterized by scanning electron microscopy, their structure by FTIR, their transparency by UV-Vis and their thermal properties by TGA. The films showed a hydrophobic character (contact angle above 100°), barrier properties to oxygen and carbon dioxide and strong antibacterial activity against Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria. Moreover, the use of nanofillers did not deteriorate the elongation at breaks or the thermal properties of the films, but their addition reduced the transparency. In addition, the results showed that the greatest change in film properties occurred within the first 7 days after sample preparation, after which the properties were found to stabilize.

Reinforcement of the antimicrobial activity and biofilm inhibition of novel chitosan-based hydrogels utilizing zinc oxide nanoparticles

Two novel chemically cross-linked chitosan hydrogels were successfully prepared via insertion of oxalyl dihydrazide moieties between chitosan Schiff's base chains (OCsSB) and between chitosan chains (OCs). For more modification, two different concentrations of ZnO nanoparticles (ZnONPs) were loaded into OCs to obtain OCs/ZnONPs-1 % and OCs/ZnONPs-3 % composites. The prepared samples were recognized using elemental analyses, FTIR, XRD, SEM, EDS and TEM. Their inhibitory action against microbes and biofilms were classified as: OCs/ZnONPs-3 % > OCs/ZnONPs-1 % > OCs > OCsSB > chitosan. OCs has inhibition activity similar to Vancomycin of minimum inhibitory concentration (MIC) value of 3.9 μg/mL against P. aeruginosa. OCs exhibited minimum biofilm inhibitory concentration (MBIC) values (from 31.25 to 62.5 μg/mL) less than that of OCsSB (from 62.5 to 250 μg/mL) which lower than that of chitosan (from 500 to 1000 μg/mL) against S. epidermidis, P. aeruginosa and C. albicans. OCs/ZnNPs-3 % showed MIC value (that caused 100 % inhibition of Clostridioides difficile, C. difficile) of 0.48 μg/mL much lower than Vancomycin (1.95 μg/mL). Both OCs and OCs/ZnONPs-3 % composite were safe on normal human cells. Thus, inclusion of oxalyl dihydrazide and ZnONPs into chitosan greatly reinforced its antimicrobial activity. This is a good strategy to accomplish adequate systems for competing traditional antibiotics.

Addressing Nanovaccine Strategies for Tilapia

Tilapia is the world's most extensively farmed species after carp. It is an attractive species for aquaculture as it grows quickly, reaching harvest size within six to seven months of production, and provides an important source of food and revenue for many low-income families, especially in low- to middle-income countries. The expansion of tilapia aquaculture has resulted in an intensification of farming systems, and this has been associated with increased disease outbreaks caused by various pathogens, mostly bacterial and viral agents. Vaccination is routinely used to control disease in higher-value finfish species, such as Atlantic salmon. At the same time, many tilapia farmers are often unwilling to vaccinate their fish by injection once the fish have been moved to their grow-out site. Alternative vaccination strategies are needed to help tilapia farmers accept and use vaccines. There is increasing interest in nanoparticle-based vaccines as alternative methods for delivering vaccines to fish, especially for oral and immersion administration. They can potentially improve vaccine efficacy through the controlled release of antigens, protecting antigens from premature proteolytic degradation in the gastric tract, and facilitating antigen uptake and processing by antigen-presenting cells. They can also allow targeted delivery of the vaccine at mucosal sites. This review provides a brief overview of the bacterial and viral diseases affecting tilapia aquaculture and vaccine strategies for farmed tilapia. It focuses on the use of nanovaccines to improve the acceptance and uptake of vaccines by tilapia farmers.

Integrating Artificial Intelligence with Quality by Design in the Formulation of Lecithin/Chitosan Nanoparticles of a Poorly Water-Soluble Drug

The aim of the current study is to explore the potential of artificial intelligence (AI) when integrated with Quality by Design (QbD) approach in the formulation of a poorly water-soluble drug, for its potential use in carcinoma. Silymarin is used as a model drug for its potential effectiveness in liver cancer. A detailed QbD approach was applied. The effect of the critical process parameters was studied on each of the particle size, size distribution, and entrapment efficiency. Response surface designs were applied in the screening and optimization of lecithin/chitosan nanoparticles, to obtain an optimized formula. The release rate was tested, where artificial neural network models were used to predict the % release of the drug from the optimized formula at different time intervals. The optimized formula was tested for its cytotoxicity. A design space was established, with an optimized formula having a molar ratio of 18.33:1 lecithin:chitosan and 38.35 mg silymarin. This resulted in nanoparticles with a size of 161 nm, a polydispersity index of 0.2, and an entrapment efficiency of 97%. The optimized formula showed a zeta potential of +38 mV, with well-developed spherical particles. AI successfully showed high prediction ability of the drug's release rate. The optimized formula showed an enhancement in the cytotoxic effect of silymarin with a decreased IC50 compared to standard silymarin. Lecithin/chitosan nanoparticles were successfully formulated, with deep process and product understanding. Several tools were used as AI which could shift pharmaceutical formulations from experience-dependent studies to data-driven methodologies in the future.

Impact of nanocarrier aggregation on EPR-mediated tumor targeting

The aim of this study was to investigate the influence of excipients on retaining the particle size of methotrexate (MTX) loaded chitosan nanocarriers (CsNP) during lyophilization, which relates to the ability to enlarge the particle size and target specific areas. The nanocarriers were prepared using the ionic gelation technique with tripolyphosphate as a crosslinker. Three lyophilized formulations were used: nanosuspension without Lyoprotectant (NF), with mannitol (NFM), and with sucrose (NFS). The lyophilized powder intended for injection (PI) was examined to assess changes in particle size, product integrity, and comparative biodistribution studies to evaluate targeting ability. After lyophilization, NFS was excluded from in-vivo studies due to the product melt-back phenomenon. The particle size of the NF lyophile significantly increased from 176 nm to 261 nm. In contrast, NFM restricted the nanocarrier size to 194 nm and exhibited excellent cake properties. FTIR, XRD, and SEM analysis revealed the transformation of mannitol into a stable β, δ polymorphic form. Biodistribution studies showed that the nanocarriers significantly increased MTX accumulation in tumor tissue (NF = 2.04 ± 0.27; NFM = 2.73 ± 0.19) compared to the marketed PI (1.45 ± 0.25 μg), but this effect was highly dependent on the particle size. Incorporating mannitol yielded positive results in restricting particle size and favoring successful tumor targeting. This study demonstrates the potential of chitosan nanocarriers as promising candidates for targeted tumor drug delivery and cancer treatment.

Use of Chitosan from Southern King Crab to Develop Films Functionalized with RGD Peptides for Potential Tissue Engineering Applications

Southern King Crab (SKC) represents an important fishery resource that has the potential to be a natural source of chitosan (CS) production. In tissue engineering, CS is very useful to generate biomaterials. However, CS has a lack of signaling molecules that facilitate cell-substrate interaction. Therefore, RGD (arginine-glycine-aspartic acid) peptides corresponding to the main integrin recognition site in extracellular matrix proteins have been used to improve the CS surface. The aim of this study was to evaluate in vitro cell adhesion and proliferation of CS films synthesized from SKC shell wastes functionalized with RGD peptides. The FTIR spectrum of CS isolated from SKC shells (SKC-CS) was comparable to commercial CS. Thermal properties of films showed similar endothermic peaks at 53.4 and 53.0 °C in commercial CS and SKC-CS, respectively. The purification and molecular masses of the synthesized RGD peptides were confirmed using HPLC and ESI-MS mass spectrometry, respectively. Mouse embryonic fibroblast cells showed higher adhesion on SKC-CS (1% w/v) film when it was functionalized with linear RGD peptides. In contrast, a cyclic RGD peptide showed similar adhesion to control peptide (RDG), but the highest cell proliferation was after 48 h of culture. This study shows that functionalization of SKC-CS films with linear or cyclic RGD peptides are useful to improve effects on cell adhesion or cell proliferation. Furthermore, our work contributes to knowledge of a new source of CS to synthesize constructs for tissue engineering applications.

Electrospun Nanofibrous Mesh Based on PVA, Chitosan, and Usnic Acid for Applications in Wound Healing

Injuries and diseases of the skin require accurate treatment using nontoxic and noninvasive biomaterials, which aim to mimic the natural structures of the body. There is a strong need to develop biodevices capable of accommodating nutrients and bioactive molecules and generating the process of vascularization. Electrospinning is a robust technique, as it can form fibrous structures for tissue engineering and wound dressings. The best way of forming such meshes for wound healing is to choose two polymers that complement each other regarding their properties. On the one hand, PVA is a water-soluble synthetic polymer widely used for the preparation of hydrogels in the field of biomedicine owing to its biocompatibility, water solubility, nontoxicity, and considerable mechanical properties. PVA is easy to subject to electrospinning and can offer strong mechanical stability of the mesh, but it is necessary to improve its biological properties. On the other hand, CS has good biological properties, including biodegradability, nontoxicity, biocompatibility, and antimicrobial properties. Still, it is harder to electrospin and does not possess as good mechanical properties as PVA. As these structures also allow the incorporation of bioactive agents due to their high surface-area-to-volume ratio, the interesting point was to incorporate usnic acid into the structure as it is a natural and suitable alternative agent for burn wounds treatment which avoids an improper or overuse of antibiotics and other invasive biomolecules. Thus, we report the fabrication of an electrospun nanofibrous mesh based on PVA, chitosan, and usnic acid with applications in wound healing. The obtained nanofibers mesh was physicochemically characterized by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). In vitro biological assays were performed to evaluate the antimicrobial properties of the samples using the MIC (minimum inhibitory concentration) assay and evaluating the influence of fabricated meshes on the Staphylococcus aureus biofilm development, as well as their biocompatibility (demonstrated by fluorescence microscopy results, an XTT assay, and a glutathione (GSH) assay).

Telmisartan-Loaded Lactosylated Chitosan Nanoparticles as a Liver Specific Delivery System: Synthesis, Optimization and Targeting Efficiency

Hepatocellular carcinoma (HCC) has a significant economic impact and a high mortality rate. Telmisartan (TLM) is a potential therapy for HCC, but it has a limited scope in drug delivery due to unpredictable distribution and poor bioavailability. The objective of this study was to prepare, design, and in vitro evaluate lactose-modified chitosan nanoparticles (LCH NPs) as a liver-targeted nanocarrier for TLM with the potential to offer a promising HCC therapy. The combination of chitosan with lactose was successfully attained using the Maillard reaction. TLM-LCH NPs were prepared, characterized, and optimized with the developed 2³ full factorial design. The optimized formulation (F1) was in vitro and in vivo characterized. LCH was synthesized with an acceptable yield of 43.8 ± 0.56%, a lactosylation degree of 14.34%, and a significantly higher aqueous solubility (6.28 ± 0.21 g/L) compared to native chitosan (0.25 ± 0.03 g/L). In vitro characterization demonstrated that, F1 had a particle size of 145.46 ± 0.7 nm, an entrapment efficiency of 90.21 ± 0.28%, and a surface charge of + 27.13 ± 0.21 mV. In vitro TLM release from F1 was most consistent with the Higuchi model and demonstrated significantly higher release at pH 5.5. Moreover, a significantly higher ratio of liver to plasma concentration was observed with TLM-LCH NPs compared to plain TLM and unmodified TLM-NPs. The obtained results nominate TLM-LCH NPs as a promising carrier for enhancing liver targeting of TLM in treatment of HCC.

Physico-chemistry and Cytotoxicity of Tenofovir-Loaded Acid Phosphatase-Responsive Chitosan Nanoparticles

This study assesses the in vitro release of tenofovir (TFV)-loaded triphosphate (TPP) cross-linked chitosan nanoparticles (NPs) catalyzed by human prostatic acid phosphatase (hPAP) for 24 h. The physico-chemical characterization of the NPs included particle mean diameter (PMD), zeta potential (ζ), percent drug encapsulation efficiency (% EE), Fourier transform infra-red (FTIR) spectroscopy, powder X-ray diffractometry analysis (PXRD), and drug release kinetics. The first-order rate constant (k) and activation energy (Ea) of the cross-link (TPP) are determined by the integrated rate law and Arrhenius's equations. The hPAP Michaelis-Menten constant (Km) is determined by the Lineweaver-Burk's equation. The NP's safety profile is evaluated on vaginal epithelial cells (VK2/E6E7). The lyophilized drug-loaded NPs' PMD, ζ, and PDI are 149.97 nm, 4.4 mV, and 0.3, respectively. The % EE after lyophilization is 93.7 ± 4.4%. These NPs released drug at faster rate (63% of TFV within 6 h) under the enzyme's influence. The similarity and difference factors of drug release profiles (absence vs presence of hPAP) are 56.5 and 40.3, respectively. The hPAP's Km value of 0.019 mM suggests it has a good affinity for TPP at physiological pH ~ 7.4. The enhanced hydrolysis of TPP or degradation of chitosan NPs is fundamentally due to a decrease of TPP's activation energy by hPAP. In fact, the Ea value is 22.50 ± 3.06 kJ/mol or 16.33 ± 0.62 kJ/mol in the absence or presence of hPAP, respectively. The NPs are non-cytotoxic to the treated vaginal cell line. These hPAP-responsive NPs are promising topical nanomicrobicides for HIV/AIDS prevention.