1
|
Gürtler AL, Lang JC, Czyrski GS, Sirois JP, Melican K, Rades T, Heinz A. Electrospun fiber patches for inflammatory skin diseases - Correlating in vitro drug release with ex vivo permeation. BIOMATERIALS ADVANCES 2024; 166:214068. [PMID: 39413707 DOI: 10.1016/j.bioadv.2024.214068] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/24/2024] [Revised: 09/24/2024] [Accepted: 10/09/2024] [Indexed: 10/18/2024]
Abstract
In this proof-of-concept study, we aimed to develop an anti-inflammatory patch that in contrast to the semi-solid standard therapy is dry and non-greasy, and only needs to be changed once a day due to continuous release of the active ingredient over 24 h. While fiber materials for the treatment of inflammatory skin diseases have been reported in the literature, the majority of studies focuses solely on material characterization including in vitro release studies; however, there is a lack of ex vivo permeation studies as well as comparison with standard therapy. However, such experiments are crucial to deduct the potential efficacy of the drug delivery system, as skin absorption of the drug may be the rate-limiting step and not the drug release. Therefore, we set out to investigate different types of electrospun fiber systems based on polycaprolactone, a polymer with a well-established safety profile widely used for fabricating electrospun patches. The electrospun fiber patches were loaded with the anti-inflammatory drug hydrocortisone and characterized not only for their drug release properties, but for the first time also for their skin permeation and retention as well as their cytocompatibility and anti-inflammatory properties on human skin. While in the release studies, the layer-by-layer fiber system proved to be best suited for an application time of 24 h, this was not reflected in the permeation studies, where all fiber systems showed a similar skin permeation and retention of the drug. In our study set-up, a comparison with standard cream formulations revealed that electrospun fibers offer an advantage in terms of the permeated amount of hydrocortisone. Overall, this study supports the importance of conducting comparisons with standard therapies and, additionally, confirms that electrospun fibers are a promising dosage form for the controlled release of anti-inflammatory drugs for the treatment of inflammatory skin diseases.
Collapse
Affiliation(s)
- Anna-Lena Gürtler
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Julia C Lang
- Center for the Advancement of Integrated Medical and Engineering Sciences (AIMES), Karolinska Institutet and KTH Royal Institute of Technology, Stockholm, Sweden; Department of Neuroscience Karolinska Institutet, Stockholm, Sweden
| | - Grzegorz S Czyrski
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Jonathan P Sirois
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Keira Melican
- Center for the Advancement of Integrated Medical and Engineering Sciences (AIMES), Karolinska Institutet and KTH Royal Institute of Technology, Stockholm, Sweden; Department of Neuroscience Karolinska Institutet, Stockholm, Sweden
| | - Thomas Rades
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Andrea Heinz
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark.
| |
Collapse
|
2
|
Huang K, Si Y, Guo C, Hu J. Recent advances of electrospun strategies in topical products encompassing skincare and dermatological treatments. Adv Colloid Interface Sci 2024; 331:103236. [PMID: 38917594 DOI: 10.1016/j.cis.2024.103236] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/21/2023] [Revised: 03/25/2024] [Accepted: 06/12/2024] [Indexed: 06/27/2024]
Abstract
As the potential applications of electrospinning in healthcare continue to be explored, along with advancements in industrial-scale solutions and the emergence of portable electrospinning devices, some researchers have explored electrospinning technology in topical products, including its application in skincare, such as facial masks, beauty patches, sunscreen, and dermatological treatments for conditions like atopic dermatitis, psoriasis, acne, skin cancer, etc. In this review, we first outline the fundamental principles of electrospinning and provide an overview of existing solutions for large-scale production and the components and functionalities of portable spinning devices. Based on the essential functionalities required for skincare products and the mechanisms and treatment methods for the aforementioned dermatological diseases, we summarize the potential advantages of electrospinning technology in these areas, including encapsulation, sustained release, large surface area, and biocompatibility, among others. Furthermore, considering the further commercialization and clinical development of electrospinning technology, we offer our insights on current challenges and future perspectives in these areas, including issues such as ingredients, functionality, residue concerns, environmental impact, and efficiency issues.
Collapse
Affiliation(s)
- Kaisong Huang
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong, S.A.R 999077, China
| | - Yifan Si
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong, S.A.R 999077, China
| | - Chunxia Guo
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong, S.A.R 999077, China
| | - Jinlian Hu
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong, S.A.R 999077, China.
| |
Collapse
|
3
|
Knapczyk‐Korczak J, Szewczyk PK, Berniak K, Marzec MM, Frąc M, Pichór W, Stachewicz U. Flexible and Thermally Insulating Porous Materials Utilizing Hollow Double-Shell Polymer Fibers. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2404154. [PMID: 38925613 PMCID: PMC11423226 DOI: 10.1002/advs.202404154] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/19/2024] [Revised: 06/02/2024] [Indexed: 06/28/2024]
Abstract
The global climate change is mainly caused by carbon dioxide (CO2) emissions. To help reduce CO2 emissions and conserve thermal energy, sustainable materials based on flexible thermal insulation are developed to minimize heat flux, drawing inspiration from natural systems such as polar bear hairs. The unique structure of hollow double-shell fibers makes it possible to achieve low thermal conductivity in the material while retaining exceptional elasticity, allowing it to adapt to insulation systems of any shape. The layered system of porous mats reaches a thermal conductivity coefficient of 0.031 W∙m⁻¹∙K⁻¹ and enables to reduce the heat transfer. The results achieved using scanning thermal microscopy (SThM) correlate with the simulated heat flow in the case of individual fibers. This research study brings new insights into the energy efficiency of domestic environments, thereby addressing the growing demand for sustainable and high-performance insulation materials for saving energy loss and reducing pollution footprint.
Collapse
Affiliation(s)
- Joanna Knapczyk‐Korczak
- Faculty of Metals Engineering and Industrial Computer ScienceAGH University of Krakowal. A. Mickiewicza 30Kraków30‐059Poland
| | - Piotr K. Szewczyk
- Faculty of Metals Engineering and Industrial Computer ScienceAGH University of Krakowal. A. Mickiewicza 30Kraków30‐059Poland
| | - Krzysztof Berniak
- Faculty of Metals Engineering and Industrial Computer ScienceAGH University of Krakowal. A. Mickiewicza 30Kraków30‐059Poland
| | - Mateusz M. Marzec
- Academic Centre for Materials and NanotechnologyAGH University of Krakowal. A. Mickiewicza 30Kraków30‐059Poland
| | - Maksymilian Frąc
- Faculty of Materials Science and CeramicsAGH University of Krakowal. A. Mickiewicza 30Kraków30‐059Poland
| | - Waldemar Pichór
- Faculty of Materials Science and CeramicsAGH University of Krakowal. A. Mickiewicza 30Kraków30‐059Poland
| | - Urszula Stachewicz
- Faculty of Metals Engineering and Industrial Computer ScienceAGH University of Krakowal. A. Mickiewicza 30Kraków30‐059Poland
| |
Collapse
|
4
|
Gürtler AL, Maltschik AM, M Güler Yildiz S, Vangelofski K, Gade L, Grohganz H, Rades T, Heinz A. Advancing inflammatory skin disease therapy: Sustained tofacitinib release via electrospun fiber dressings. Eur J Pharm Biopharm 2024; 202:114423. [PMID: 39038523 DOI: 10.1016/j.ejpb.2024.114423] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/19/2024] [Revised: 07/16/2024] [Accepted: 07/18/2024] [Indexed: 07/24/2024]
Abstract
Inflammatory skin diseases are typically managed with semi-solid formulations such as creams and ointments. These treatments often fail to remain on the skin for long, as they can be easily wiped off by clothing, necessitating frequent reapplication throughout the day and resulting in poor patient adherence. Therefore, this study sought to fabricate an electrospun dressing as an alternative dosage form that provides a sustained release of the anti-inflammatory agent tofacitinib over three days. In this study, three types of electrospun fiber dressings - uniaxial, coaxial, and layer-by-layer - were produced and examined for their morphological, mechanical, and release characteristics. In addition to a comprehensive characterization, another objective was to analyze the drug permeation behavior from these fiber dressings on porcine skin, comparing their performance to that of a tofacitinib cream. The layer-by-layer system notably exhibited a delayed drug release, while the uniaxial and coaxial systems demonstrated an initial burst release. However, the permeation studies revealed no significant differences between these systems, underscoring the necessity of conducting such studies - a crucial aspect often overlooked in research on electrospun fiber dressings. Overall, this study highlights the potential of electrospun, drug-loaded dressings for the treatment of inflammatory skin diseases.
Collapse
Affiliation(s)
- Anna-Lena Gürtler
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Andreas M Maltschik
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Sibel M Güler Yildiz
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Katerina Vangelofski
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Luna Gade
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Holger Grohganz
- Department of Pharmacy, University of Copenhagen, Copenhagen, Denmark
| | - Thomas Rades
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Andrea Heinz
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark.
| |
Collapse
|
5
|
Verčimáková K, Karbowniczek J, Sedlář M, Stachewicz U, Vojtová L. The role of glycerol in manufacturing freeze-dried chitosan and cellulose foams for mechanically stable scaffolds in skin tissue engineering. Int J Biol Macromol 2024; 275:133602. [PMID: 38964681 DOI: 10.1016/j.ijbiomac.2024.133602] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2024] [Revised: 06/21/2024] [Accepted: 06/30/2024] [Indexed: 07/06/2024]
Abstract
Various strategies have extensively explored enhancing the physical and biological properties of chitosan and cellulose scaffolds for skin tissue engineering. This study presents a straightforward method involving the addition of glycerol into highly porous structures of two polysaccharide complexes: chitosan/carboxymethyl cellulose (Chit/CMC) and chitosan/oxidized cellulose (Chit/OC); during a one-step freeze-drying process. Adding glycerol, especially to Chit/CMC, significantly increased stability, prevented degradation, and improved mechanical strength by nearly 50%. Importantly, after 21 days of incubation in enzymatic medium Chit/CMC scaffold has almost completely decomposed, while foams reinforced with glycerol exhibited only 40% mass loss. It is possible due to differences in multivalent cations and polymer chain contraction, resulting in varied hydrogen bonding and, consequently, distinct physicochemical outcomes. Additionally, the scaffolds with glycerol improved the cellular activities resulting in over 40% higher proliferation of fibroblast after 21 days of incubation. It was achieved by imparting water resistance to the highly absorbent material and aiding in achieving a balance between hydrophilic and hydrophobic properties. This study clearly indicates the possible elimination of additional crosslinkers and multiple fabrication steps that can reduce the cost of scaffold production for skin tissue engineering applications while tailoring mechanical strength and degradation.
Collapse
Affiliation(s)
- Katarína Verčimáková
- Ceitec - Central European Institute of Technology, Brno University of Technology, Purkyňova 656/123, 612 00 Brno, Czech Republic.
| | - Joanna Karbowniczek
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Kraków, al. Adama Mickiewicza 30, 30-059 Kraków, Poland.
| | - Marian Sedlář
- Ceitec - Central European Institute of Technology, Brno University of Technology, Purkyňova 656/123, 612 00 Brno, Czech Republic.
| | - Urszula Stachewicz
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Kraków, al. Adama Mickiewicza 30, 30-059 Kraków, Poland.
| | - Lucy Vojtová
- Ceitec - Central European Institute of Technology, Brno University of Technology, Purkyňova 656/123, 612 00 Brno, Czech Republic.
| |
Collapse
|
6
|
Sroczyk EA, Tarasiuk A, Talar M, Rutledge GC, Makaro A, Misztal Z, Wołyniak M, Berniak K, Sałaga M, Fichna J, Stachewicz U. Cholesterol Nanofiber Patches with Sustainable Oil Delivery Eliminate Inflammation in Atopic Skin. ACS APPLIED MATERIALS & INTERFACES 2024; 16:37783-37794. [PMID: 38994590 DOI: 10.1021/acsami.4c09400] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/13/2024]
Abstract
Atopic skin is dry and itchy and lacks integrity. Impaired skin barrier results from altered lipid composition of the skin. A crucial skin lipid, cholesterol, provides flexibility and homeostasis of the cell membranes' lipid bilayer. Cholesterol-based creams and natural oils, especially blackcurrant seed oil, are beneficial for skin care as they hydrate the skin and improve its integrity. The major atopic symptom, skin dryness, can be overcome by the application of porous patches enhanced with cholesterol and natural oil. The base of the patches is constructed of polyimide (PI) nanofibers with cholesterol coatings and externally added blackcurrant seed oil. The presence of cholesterol in PI mats hinders the passage of oil through the patches to the skin, resulting in sustained and prolonged skin hydration. The theoretical and numerical investigations of oil dynamics in porous mats confirmed the experimental results, showing a prolonged skin hydration effect up to 6 h. Additionally, as demonstrated by in vivo tests on atopic mice, cholesterol patches lower serum immunoglobulin E levels and expression of proinflammatory cytokines in the skin, thereby accelerating skin healing. Our results hold great promise for the long-term application of the patches in atopic dermatitis treatment.
Collapse
Affiliation(s)
- Ewa A Sroczyk
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Krakow, Poland
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge 02139, Massachusetts, United States
| | - Aleksandra Tarasiuk
- Department of Biochemistry, Faculty of Medicine, Medical University of Lodz, Mazowiecka 5, 92-215 Lodz, Poland
| | - Marcin Talar
- Department of Biochemistry, Faculty of Medicine, Medical University of Lodz, Mazowiecka 5, 92-215 Lodz, Poland
| | - Gregory C Rutledge
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge 02139, Massachusetts, United States
| | - Adam Makaro
- Department of Biochemistry, Faculty of Medicine, Medical University of Lodz, Mazowiecka 5, 92-215 Lodz, Poland
| | - Zofia Misztal
- Department of Biochemistry, Faculty of Medicine, Medical University of Lodz, Mazowiecka 5, 92-215 Lodz, Poland
| | - Maria Wołyniak
- Department of Biochemistry, Faculty of Medicine, Medical University of Lodz, Mazowiecka 5, 92-215 Lodz, Poland
| | - Krzysztof Berniak
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Krakow, Poland
| | - Maciej Sałaga
- Department of Biochemistry, Faculty of Medicine, Medical University of Lodz, Mazowiecka 5, 92-215 Lodz, Poland
| | - Jakub Fichna
- Department of Biochemistry, Faculty of Medicine, Medical University of Lodz, Mazowiecka 5, 92-215 Lodz, Poland
| | - Urszula Stachewicz
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Krakow, Poland
| |
Collapse
|
7
|
Chawla R, Fang Z. Hemp macromolecules: Crafting sustainable solutions for food and packaging innovation. Int J Biol Macromol 2024; 273:132823. [PMID: 38852732 DOI: 10.1016/j.ijbiomac.2024.132823] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/30/2024] [Revised: 05/08/2024] [Accepted: 05/30/2024] [Indexed: 06/11/2024]
Abstract
Industrial hemp has gained increasing interests for its applications in multifaceted areas, including foods, pharmaceuticals and reinforcing materials. The high protein content of hempseeds, presence of essential fatty acids and balanced ratio of omega 6:3 fatty acids, makes hemp an ideal source of choice amongst nutritionists and food product developers. The use of hemp has also been advocated in lowering the risks of certain medical conditions. The antimicrobial and antioxidant feature of oil expands its potential in innovative packaging solutions in the form of coatings or films for shelf-life extension. Fiber from hemp hulls, herd or stalks encourages it as a reinforcement material with eco-friendly attributes. This review explores the applications of hemp in novel product development, with the highlights of its nutritional benefits and antimicrobial efficacy in food and packaging sectors.
Collapse
Affiliation(s)
- Rekha Chawla
- Department of Dairy Technology, College of Dairy Science and Technology, Guru Angad Dev Veterinary and Animal Sciences University, Ludhiana, Punjab, India.
| | - Zhongxiang Fang
- School of Agriculture, Food, and Ecosystem Sciences, Faculty of Sciences, The University of Melbourne, Parkville, Victoria, Australia
| |
Collapse
|
8
|
Sobieraj J, Strzelecka K, Sobczak M, Oledzka E. How Biodegradable Polymers Can be Effective Drug Delivery Systems for Cannabinoids? Prospectives and Challenges. Int J Nanomedicine 2024; 19:4607-4649. [PMID: 38799700 PMCID: PMC11128233 DOI: 10.2147/ijn.s458907] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/18/2024] [Accepted: 04/15/2024] [Indexed: 05/29/2024] Open
Abstract
Cannabinoids are compounds found in and derived from the Cannabis plants that have become increasingly recognised as significant modulating factors of physiological mechanisms and inflammatory reactions of the organism, thus inevitably affecting maintenance of homeostasis. Medical Cannabis popularity has surged since its legal regulation growing around the world. Numerous promising discoveries bring more data on cannabinoids' pharmacological characteristics and therapeutic applications. Given the current surge in interest in the medical use of cannabinoids, there is an urgent need for an effective method of their administration. Surpassing low bioavailability, low water solubility, and instability became an important milestone in the advancement of cannabinoids in pharmaceutical applications. The numerous uses of cannabinoids in clinical practice remain restricted by limited administration alternatives, but there is hope when biodegradable polymers are taken into account. The primary objective of this review is to highlight the wide range of indications for which cannabinoids may be used, as well as the polymeric carriers that enhance their effectiveness. The current review described a wide range of therapeutic applications of cannabinoids, including pain management, neurological and sleep disorders, anxiety, and cancer treatment. The use of these compounds was further examined in the area of dermatology and cosmetology. Finally, with the use of biodegradable polymer-based drug delivery systems (DDSs), it was demonstrated that cannabinoids can be delivered specifically to the intended site while also improving the drug's physicochemical properties, emphasizing their utility. Nevertheless, additional clinical trials on novel cannabinoids' formulations are required, as their full spectrum therapeutical potential is yet to be unravelled.
Collapse
Affiliation(s)
- Jan Sobieraj
- Department of Pharmaceutical Chemistry and Biomaterials, Faculty of Pharmacy, Medical University of Warsaw, Warsaw, 02-097, Poland
| | - Katarzyna Strzelecka
- Department of Pharmaceutical Chemistry and Biomaterials, Faculty of Pharmacy, Medical University of Warsaw, Warsaw, 02-097, Poland
| | - Marcin Sobczak
- Department of Pharmaceutical Chemistry and Biomaterials, Faculty of Pharmacy, Medical University of Warsaw, Warsaw, 02-097, Poland
| | - Ewa Oledzka
- Department of Pharmaceutical Chemistry and Biomaterials, Faculty of Pharmacy, Medical University of Warsaw, Warsaw, 02-097, Poland
| |
Collapse
|
9
|
Gürtler AL, Rades T, Heinz A. Electrospun fibers for the treatment of skin diseases. J Control Release 2023; 363:621-640. [PMID: 37820983 DOI: 10.1016/j.jconrel.2023.10.009] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/21/2023] [Revised: 09/20/2023] [Accepted: 10/04/2023] [Indexed: 10/13/2023]
Abstract
Skin diseases are among the most common diseases in the global population and with the growth of the aging population, they represent an increasing burden to healthcare systems worldwide. Even though they are rarely life-threatening, the suffering for those affected is high due to the visibility and physical discomfort related to these diseases. Typical symptoms of skin diseases include an inflamed, swollen or itchy skin, and therefore, there is a high demand for effective therapy options. In recent years, electrospinning has attracted considerable interest in the field of drug delivery. The technique allows producing multifunctional drug-loaded fibrous patches from various natural and synthetic polymers with fiber diameters in the nano- and micrometer range, suitable for the treatment of a wide variety of skin diseases. The great potential of electrospun fiber patches not only lies in their tunable drug release properties and the possibility to entrap a variety of therapeutic compounds, but they also provide physical and mechanical protection to the impaired skin area, exhibit a high surface area, allow gas exchange, absorb exudate due to their porous structure and are cytocompatible and biodegradable. In the case of wound healing, cell adhesion is promoted due to the resemblance of the electrospun fibers to the structure of the native extracellular matrix. This review gives an overview of the potential applications of electrospun fibers in skin therapy. In addition to the treatment of bacterial, diabetic and burn wounds, focus is placed on inflammatory diseases such as atopic dermatitis and psoriasis, and therapeutic options for the treatment of skin cancer, acne vulgaris and herpes labialis are discussed. While we aim to emphasize the great potential of electrospun fiber patches for the treatment of skin diseases with this review paper, we also highlight challenges and limitations of current research in the field.
Collapse
Affiliation(s)
- Anna-Lena Gürtler
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Thomas Rades
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark
| | - Andrea Heinz
- Department of Pharmacy, LEO Foundation Center for Cutaneous Drug Delivery, University of Copenhagen, Copenhagen, Denmark.
| |
Collapse
|
10
|
Krysiak ZJ, Stachewicz U. Electrospun fibers as carriers for topical drug delivery and release in skin bandages and patches for atopic dermatitis treatment. WILEY INTERDISCIPLINARY REVIEWS. NANOMEDICINE AND NANOBIOTECHNOLOGY 2023; 15:e1829. [PMID: 35817463 DOI: 10.1002/wnan.1829] [Citation(s) in RCA: 27] [Impact Index Per Article: 27.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/13/2022] [Revised: 05/27/2022] [Accepted: 05/31/2022] [Indexed: 01/31/2023]
Abstract
The skin is a complex layer system and the most important barrier between the environment and the organism. In this review, we describe some widespread skin problems, with a focus on eczema, which are affecting more and more people all over the world. Most of treatment methods for atopic dermatitis (AD) are focused on increasing skin moisture and protecting from bacterial infection and external irritation. Topical and transdermal treatments have specific requirements for drug delivery. Breathability, flexibility, good mechanical properties, biocompatibility, and efficacy are important for the patches used for skin. Up to today, electrospun fibers are mostly used for wound dressing. Their properties, however, meet the requirements for skin patches for the treatment of AD. Active agents can be incorporated into fibers by blending, coaxial or side-by-side electrospinning, and also by physical absorption post-processing. Drug release from the electrospun membranes is affected by drug and polymer properties and the technique used to combine them into the patch. We describe in detail the in vitro release mechanisms, parameters affecting the drug transport, and their kinetics, including theoretical approaches. In addition, we present the current research on skin patch design. This review summarizes the current extensive know-how on electrospun fibers as skin drug delivery systems, while underlining the advantages in their prospective use as patches for atopic dermatitis. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Therapeutic Approaches and Drug Discovery > Emerging Technologies.
Collapse
Affiliation(s)
- Zuzanna J Krysiak
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Krakow, Poland
| | - Urszula Stachewicz
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Krakow, Poland
| |
Collapse
|
11
|
Krysiak ZJ, Szewczyk PK, Berniak K, Sroczyk EA, Boratyn E, Stachewicz U. Stretchable skin hydrating PVB patches with controlled pores' size and shape for deliberate evening primrose oil spreading, transport and release. BIOMATERIALS ADVANCES 2022; 136:212786. [PMID: 35929319 DOI: 10.1016/j.bioadv.2022.212786] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/15/2021] [Revised: 03/29/2022] [Accepted: 03/31/2022] [Indexed: 06/15/2023]
Abstract
With the increasing number of skin problems such as atopic dermatitis and the number of affected people, scientists are looking for alternative treatments to standard ointment or cream applications. Electrospun membranes are known for their high porosity and surface to volume area, which leads to a great loading capacity and their applications as skin patches. Polymer fibers are widely used for biomedical applications such as drug delivery systems or regenerative medicine. Importantly, fibrous meshes are used as oil reservoirs due to their excellent absorption properties. In our study, nano- and microfibers of poly (vinyl butyral-co-vinyl alcohol-co-vinyl acetate) (PVB) were electrospun. The biocompatibility of PVB fibers was confirmed with the keratinocytes culture studies, including cells' proliferation and replication tests. To verify the usability and stretchability of electrospun membranes, they were tested in two forms as-spun and elongated after uniaxially stretched. We examine oil transport through the patches for as-spun fibers and compare it with the numerical simulation of oil flow in the 3D reconstruction of nano- and microfiber networks. Evening primrose oil spreading and water vapor transmission rate (WVTR) tests were performed too. Finally, for skin hydration tests, manufactured materials loaded with evening primrose oil were applied to the forearm of volunteers for 6 h, showing increased skin moisture after using patches. This study clearly demonstrates that pore size and shape, together with fiber diameter, influence oil transport in the electrospun patches allowing to understand the key driving process of electrospun PVB patches for skin hydration applications. The oil release improves skin moisture and can be designed regarding the needs, by manufacturing different fibers' sizes and arrangements. The fibrous based patches loaded with oils are easy to handle and could remain on the altered skin for a long time and deliver the oil, therefore they are an ideal material for overnight bandages for skin treatment.
Collapse
Affiliation(s)
- Zuzanna J Krysiak
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
| | - Piotr K Szewczyk
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
| | - Krzysztof Berniak
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
| | - Ewa A Sroczyk
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
| | | | - Urszula Stachewicz
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland.
| |
Collapse
|
12
|
Martins AM, Gomes AL, Vilas Boas I, Marto J, Ribeiro HM. Cannabis-Based Products for the Treatment of Skin Inflammatory Diseases: A Timely Review. Pharmaceuticals (Basel) 2022; 15:210. [PMID: 35215320 PMCID: PMC8878527 DOI: 10.3390/ph15020210] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/12/2021] [Revised: 01/31/2022] [Accepted: 02/07/2022] [Indexed: 12/04/2022] Open
Abstract
The use of natural products in dermatology is increasingly being pursued due to sustainability and ecological issues, and as a possible way to improve the therapeutic outcome of chronic skin diseases, relieving the burden for both patients and healthcare systems. The legalization of cannabis by a growing number of countries has opened the way for researching the use of cannabinoids in therapeutic topical formulations. Cannabinoids are a diverse class of pharmacologically active compounds produced by Cannabis sativa (phytocannabinoids) and similar molecules (endocannabinoids, synthetic cannabinoids). Humans possess an endocannabinoid system involved in the regulation of several physiological processes, which includes naturally-produced endocannabinoids, and proteins involved in their transport, synthesis and degradation. The modulation of the endocannabinoid system is a promising therapeutic target for multiple diseases, including vascular, mental and neurodegenerative disorders. However, due to the complex nature of this system and its crosstalk with other biological systems, the development of novel target drugs is an ongoing challenging task. The discovery of a skin endocannabinoid system and its role in maintaining skin homeostasis, alongside the anti-inflammatory actions of cannabinoids, has raised interest in their use for the treatment of skin inflammatory diseases, which is the focus of this review. Oral treatments are only effective at high doses, having considerable adverse effects; thus, research into plant-based or synthetic cannabinoids that can be incorporated into high-quality, safe topical products for the treatment of inflammatory skin conditions is timely. Previous studies revealed that such products are usually well tolerated and showed promising results for example in the treatment of atopic dermatitis, psoriasis, and contact dermatitis. However, further controlled human clinical trials are needed to fully unravel the potential of these compounds, and the possible side effects associated with their topical use.
Collapse
Affiliation(s)
- Ana M. Martins
- Research Institute for Medicines (iMed.ULisboa), Universidade de Lisboa, 1649-003 Lisbon, Portugal;
| | - Ana L. Gomes
- Faculdade de Farmácia, Universidade de Lisboa, 1649-003 Lisbon, Portugal; (A.L.G.); (I.V.B.)
| | - Inês Vilas Boas
- Faculdade de Farmácia, Universidade de Lisboa, 1649-003 Lisbon, Portugal; (A.L.G.); (I.V.B.)
| | - Joana Marto
- Research Institute for Medicines (iMed.ULisboa), Universidade de Lisboa, 1649-003 Lisbon, Portugal;
| | - Helena M. Ribeiro
- Research Institute for Medicines (iMed.ULisboa), Universidade de Lisboa, 1649-003 Lisbon, Portugal;
| |
Collapse
|
13
|
Kaniuk Ł, Podborska A, Stachewicz U. Enhanced mechanical performance and wettability of PHBV fiber blends with evening primrose oil for skin patches improving hydration and comfort. J Mater Chem B 2022; 10:1763-1774. [DOI: 10.1039/d1tb02805g] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The growing problem of skin diseases due to allergies causing atopic dermatitis, which is characterized by itching, burning, and redness, constantly motivates researchers to look for solutions to soothe these effects by moisturizing skin properly.
Collapse
Affiliation(s)
- Łukasz Kaniuk
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
| | - Agnieszka Podborska
- Academic Centre for Materials and Nanotechnology, AGH University of Science and Technology, Cracow, Poland
| | - Urszula Stachewicz
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Cracow, Poland
| |
Collapse
|
14
|
Stachewicz U. Application of Electrospun Polymeric Fibrous Membranes as Patches for Atopic Skin Treatments. ADVANCES IN POLYMER SCIENCE 2022. [DOI: 10.1007/12_2022_139] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
15
|
Ghosalkar S, Singh P, Ravikumar P. Emerging topical drug delivery approaches for the treatment of Atopic dermatitis. J Cosmet Dermatol 2021; 21:536-549. [PMID: 34935274 DOI: 10.1111/jocd.14685] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/09/2021] [Revised: 11/15/2021] [Accepted: 12/01/2021] [Indexed: 12/19/2022]
Abstract
BACKGROUND Atopic dermatitis is a chronic, relapsing skin inflammation disease that generally affects 20% of children and 1-3% of adults. It is characterized by pruritus, inflammatory skin lesions, and skin barrier defect. The pillar treatment is topical therapies that have shown great adherence and incredible results in alleviating symptoms of atopic dermatitis. Topical corticosteroids and calcineurin inhibitors have shown improvement in the symptoms of atopic dermatitis but have certain side effects. There is need to develop new therapies or novel drug delivery approaches which can overcome drawbacks of the conventional formulation and increase the therapeutic efficacy. AIM The scope of this review is to describe the new topical therapies including phosphodiesterase inhibitors, Janus kinase inhibitors, and nano-formulations such as nanoemulsion, polymeric and lipid nanoparticles, vesicular system, and micelles. METHODS The article reviews and discusses the published literature of the topical drug delivery approaches for treatment of Atopic dermatitis. RESULTS The reported literature highlighted the benefits of novel topical formulations exhibiting targeted drug delivery, better penetration, enhanced therapeutic efficacy, and overcome systemic side effects. CONCLUSION Literature indicated that the new therapies and novel drug delivery approaches found to be the therapeutically more effective in increasing the efficacy of drugs and reducing the side effects in comparison with the conventional treatments for Atopic dermatitis. This has provided a way to modify and develop more such formulations for dermal delivery.
Collapse
Affiliation(s)
- Shruti Ghosalkar
- Department of Pharmaceutics, SVKM's Dr Bhanuben Nanavati College of Pharmacy, Vile Parle (W), Mumbai, 400056, India
| | - Prabha Singh
- Department of Pharmaceutics, SVKM's Dr Bhanuben Nanavati College of Pharmacy, Vile Parle (W), Mumbai, 400056, India
| | - Padmini Ravikumar
- Department of Pharmaceutics, SVKM's Dr Bhanuben Nanavati College of Pharmacy, Vile Parle (W), Mumbai, 400056, India
| |
Collapse
|
16
|
Kaniuk Ł, Stachewicz U. Development and Advantages of Biodegradable PHA Polymers Based on Electrospun PHBV Fibers for Tissue Engineering and Other Biomedical Applications. ACS Biomater Sci Eng 2021; 7:5339-5362. [PMID: 34649426 PMCID: PMC8672356 DOI: 10.1021/acsbiomaterials.1c00757] [Citation(s) in RCA: 41] [Impact Index Per Article: 13.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
![]()
Biodegradable polymeric
biomaterials offer a significant advantage
in disposable or fast-consuming products in medical applications.
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)
is an example of a polyhydroxyalkanoate (PHA), i.e., one group of
natural polyesters that are byproducts of reactions taking place in
microorganisms in conditions with an excess carbon source. PHA polymers
are a promising material for the production of everyday materials
and biomedical applications. Due to the high number of monomers in
the group, PHAs permit modifications enabling the production of copolymers
of different compositions and with different proportions of individual
monomers. In order to change and improve the properties of polymer
fibers, PHAs are combined with either other natural and synthetic
polymers or additives of inorganic phases. Importantly, electrospun
PHBV fibers and mats showed an enormous potential in both the medical
field (tissue engineering scaffolds, plasters, wound healing, drug
delivery systems) and industrial applications (filter systems, food
packaging). This Review summarizes the current state of the art in
processing PHBV, especially by electrospinning, its degradation processes,
and biocompatibility studies, starting from a general introduction
to the PHA group of polymers.
Collapse
Affiliation(s)
- Łukasz Kaniuk
- AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, al. A. Mickiewicza 30, 30-059 Kraków, Poland
| | - Urszula Stachewicz
- AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, al. A. Mickiewicza 30, 30-059 Kraków, Poland
| |
Collapse
|
17
|
Pouladchang A, Tavanai H, Morshed M, Khajehali J, Shamsabadi AS. Controlled release of thiram pesticide from polycaprolactone micro and nanofibrous mat matrix. J Appl Polym Sci 2021. [DOI: 10.1002/app.51641] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Affiliation(s)
- Azimeh Pouladchang
- Department of Textile Engineering Isfahan University of Technology Isfahan Iran
| | - Hossein Tavanai
- Department of Textile Engineering Isfahan University of Technology Isfahan Iran
- Research Institute for Nanotechnology and Advanced Materials Isfahan University of Technology Isfahan Iran
| | - Mohammad Morshed
- Department of Textile Engineering Isfahan University of Technology Isfahan Iran
| | - Jahangir Khajehali
- Department of Plant Protection, College of Agriculture Isfahan University of Technology Isfahan Iran
| | - Amir Shahin Shamsabadi
- Research Institute for Nanotechnology and Advanced Materials Isfahan University of Technology Isfahan Iran
| |
Collapse
|
18
|
Abstract
Cannabis sativa L. plant is currently attracting increasing interest in cosmetics and dermatology. In this review, the biologically active compounds of hemp are discussed. Particularly the complex interactions of cannabinoids with the endocannabinoid system of the skin to treat various conditions (such as acne, allergic contact dermatitis, melanoma, and psoriasis) with clinical data. Moreover, the properties of some cannabinoids make them candidates as cosmetic actives for certain skin types. Hemp seed oil and its minor bioactive compounds such as terpenes, flavonoids, carotenoids, and phytosterols are also discussed for their added value in cosmetic formulation.
Collapse
|