On the Ability of Perfluorohexane Sulfonate (PFHxS) Bioaccumulation by Two Pseudomonas sp. Strains Isolated from PFAS-Contaminated Environmental Matrices

Sulfonamide Per- and Polyfluoroalkyl Substances Can Impact Microorganisms Used in Aromatic Hydrocarbon and Trichloroethene Bioremediation

Per- and polyfluoroalkyl substances (PFASs) from aqueous film forming foams (AFFFs) can hinder bioremediation of co-contaminants such as trichloroethene (TCE) and benzene, toluene, ethylbenzene, and xylene (BTEX). Anaerobic dechlorination can require bioaugmentation of Dehalococcoides, and for BTEX, oxygen is often sparged to stimulate in situ aerobic biodegradation. We tested PFAS inhibition to TCE and BTEX bioremediation by exposing an anaerobic TCE-dechlorinating coculture, an aerobic BTEX-degrading enrichment culture, and an anaerobic toluene-degrading enrichment culture to n-dimethyl perfluorohexane sulfonamido amine (AmPr-FHxSA), perfluorohexane sulfonamide (FHxSA), perfluorohexanesulfonic acid (PFHxS), or nonfluorinated surfactant sodium dodecyl sulfate (SDS). The anaerobic TCE-dechlorinating coculture was resistant to individual PFAS exposures but was inhibited by >1000× diluted AFFF. FHxSA and AmPr-FHxSA inhibited the aerobic BTEX-degrading enrichment. The anaerobic toluene-degrading enrichment was not inhibited by AFFF or individual PFASs. Increases in amino acids in the anaerobic TCE-dechlorinating coculture compared to the control indicated stress response, whereas the BTEX culture exhibited lower concentrations of all amino acids upon exposure to most surfactants (both fluorinated and nonfluorinated) compared to the control. These data suggest the main mechanisms of microbial toxicity are related to interactions with cell membrane synthesis as well as protein stress signaling.

Emergence of per- and poly-fluoroalkyl substances (PFAS) and advances in the remediation strategies

A group of fluorinated organic molecules known as per- and poly-fluoroalkyl substances (PFAS) have been commonly produced and circulated in the environment. PFAS, owing to multiple strong CF bonds, exhibit exceptional stability and possess a high level of resistance against biological or chemical degradation. Recently, PFAS have been identified to cause numerous hazardous effects on the biotic ecosystem. As a result, extensive efforts have been made in recent years to develop effective methods to remove PFAS. Adsorption, filtration, heat treatment, chemical oxidation/reduction, and soil washing are a few of the physicochemical techniques that have shown their ability to remove PFAS from contaminated matrixes. However these methods also carry significant drawbacks, including the fact that they are expensive, energy-intensive, unsuitable for in-situ treatment, and requirement to be carried under dormant conditions. The metabolic products released upon PFAS degradation are largely unknown, despite the fact that thermal disintegration methods are widely used. In contrast to physical and chemical methods, biological degradation of PFAS has been regarded as efficient method. However, PFAS are difficult to instantly and completely metabolize through biological methods due to the limitations of biocatalytic mechanisms. Nevertheless, cost, easy-to-operate and environmentally safe are some of the advantages over its counterpart. The present review comprehensively discusses the occurrence of PFAS, the state-of-the science of remediation technologies and approaches applied, and the remediation challenges. The article also focuses on the future research directions toward the development of effective methods for PFAS-contaminated site in-situ treatment.

The untold story of PFAS alternatives: Insights into the occurrence, ecotoxicological impacts, and removal strategies in the aquatic environment

Due to increasing regulations on the production and consumption of legacy per- and polyfluoroalkyl substances (PFAS), the global use of PFAS substitutes increased tremendously, posing serious environmental risks owing to their bioaccumulation, toxicity, and lack of removal strategies. This review summarized the spatial distribution of alternative PFAS and their ecological risks in global freshwater and marine ecosystems. Further, toxicological effects of novel PFAS in various freshwater and marine species were highlighted. Moreover, degradation mechanisms for alternative PFAS removal from aquatic environments were compared and discussed. The spatial distribution showed that 6:2 chlorinated polyfluorinated ether sulfonate (6:2 CI-PFAES, also known as F-53B) was the most dominant emerging PFAS found in freshwater. Additionally, the highest levels of PFBS and PFBA were observed in marine waters (West Pacific Ocean). Moreover, short-chain PFAS exhibited higher concentrations than long-chain congeners. The ecological risk quotients (RQs) for phytoplankton were relatively higher >1 than invertebrates, indicating a higher risk for freshwater phytoplankton species. Similarly, in marine water, the majority of PFAS substitutes exhibited negligible risk for invertebrates and fish, and posed elevated risks for phytoplanktons. Reviewed studies showed that alternative PFAS undergo bioaccumulation and cause deleterious effects such as oxidative stress, hepatoxicity, neurotoxicity, histopathological alterations, behavioral and growth abnormalities, reproductive toxicity and metabolism defects in freshwater and marine species. Regarding PFAS treatment methods, photodegradation, photocatalysis, and adsorption showed promising degradation approaches with efficiencies as high as 90%. Finally, research gaps and future perspectives for alternative PFAS toxicological implications and their removal were offered.

PFHxS Exposure and the Risk of Non-Alcoholic Fatty Liver Disease

Perfluorohexanesulfonic acid (PFHxS) is a highly prevalent environmental pollutant, often considered to be less toxic than other poly- and perfluoroalkyl substances (PFASs). Despite its relatively lower environmental impact compared to other PFASs, several studies have suggested that exposure to PFHxS may be associated with disruptions of liver function in humans. Nevertheless, the precise pathomechanisms underlying PFHxS-induced non-alcoholic fatty liver disease (NAFLD) remain relatively unclear. Therefore, this study applied our previously published transcriptome dataset to explore the effects of PFHxS exposure on the susceptibility to NAFLD and to identify potential mechanisms responsible for PFHxS-induced NAFLD through transcriptomic analysis conducted on zebrafish embryos. Results showed that exposure to PFHxS markedly aggravated hepatic symptoms resembling NAFLD and other metabolic syndromes (MetS) in fish. Transcriptomic analysis unveiled 17 genes consistently observed in both NAFLD and insulin resistance (IR), along with an additional 28 genes identified in both the adipocytokine signaling pathway and IR. These shared genes were also found within the NAFLD dataset, suggesting that hepatic IR may play a prominent role in the development of PFHxS-induced NAFLD. In conclusion, our study suggests that environmental exposure to PFHxS could be a potential risk factor for the development of NAFLD, challenging the earlier notion of PFHxS being safer as previously claimed.

Correlation Between Microbial Community and Hatching Failure in Loggerhead Sea Turtle Caretta caretta

Microbial communities provide essential information about host ecology and could be helpful as a tool to improve species conservation efforts. However, microbes can also infect and compromise the host development process and viability. Caretta caretta is the most widespread marine turtle species in the Mediterranean basin and is the only species of sea turtle nesting along the Italian coasts. Little is known about the microbiota composition of the nest of sea turtles and its correlation with hatching failures. In this study, the microbial composition of two nests of C. caretta featuring different rates of hatching success from a nesting beach in Lampedusa (Italy) was analyzed and compared. The bacterial community was determined using culture-dependent methods and next-generation sequencing based on 16S rRNA gene metabarcoding analysis. Our results showed five dominant bacterial phyla (Proteobacteria, Bacteroidetes, Actinobacteria, Verrucomicrobia, and Firmicutes) and indicated different bacterial families (Pseudomonadaceae and Brucellaceae) as likely causes of hatching failures. Besides, our findings demonstrated the nests' active role in modulating the sand's bacterial communities. This study suggests microbiological analysis could be a valuable tool in monitoring nests to take preventive actions and reduce hatching failures.

Hepatotoxicity assessment investigations on PFASs targeting L-FABP using binding affinity data and machine learning-based QSAR model

Per- and polyfluoroalkyl substances (PFASs) are persistent organic pollutants that have been detected in various environmental media and human serum, but their safety assessment remains challenging. PFASs may accumulate in liver tissues and cause hepatotoxicity by binding to liver fatty acid binding protein (L-FABP). Therefore, evaluating the binding affinity of PFASs to L-FABP is crucial in assessing the potential hepatotoxic effects. In this study, two binding sites of L-FABP were evaluated, results suggested that the outer site possessed high affinity to polyfluoroalkyl sulfates and the inner site preferred perfluoroalkyl sulfonamides, overall, the inner site of L-FABP was more sensitive to PFASs. The binding affinity data of PFASs to L-FABP were used as training set to develop a machine learning model-based quantitative structure-activity relationship (QSAR) for efficient prediction of potentially hazardous PFASs. Further Bayesian Kernel Machine Regression (BKMR) model disclosed flexibility as the determinant molecular property on PFASs-induced hepatotoxicity. It can influence affinity of PFASs to target protein through affecting binding conformations directly (individual effect) as well as integrating with other molecular properties (joint effect). Our present work provided more understanding on hepatotoxicity of PFASs, which could be significative in hepatotoxicity gradation, administration guidance, and safer alternatives development of PFASs.

Toxicity of per- and polyfluoroalkyl substances to microorganisms in confined hydrogel structures

Per- and polyfluoroalkyl substances (PFAS) as a group of environmentally persistent synthetic chemicals has been widely used in industrial and consumer products. Bioaccumulation studies have documented the adverse effects of PFAS in various living organisms. Despite the large number of studies, experimental approaches to evaluate the toxicity of PFAS on bacteria in a biofilm-like niche as structured microbial communities are sparse. This study suggests a facile approach to query the toxicity of PFOS and PFOA on bacteria (Escherichia coli K12 MG1655 strain) in a biofilm-like niche provided by hydrogel-based core-shell beads. Our study shows that E. coli MG1655 upon complete confinement in hydrogel beads exhibit altered physiological characteristics of viability, biomass, and protein expression, compared to their susceptible counterpart cultivated under planktonic conditions. We find that soft-hydrogel engineering platforms may provide a protective role for microorganisms from environmental contaminants, depending on the size or thickness of the protective/barrier layer. We expect our study to provide insights on the toxicity of environmental contaminants on organisms under encapsulated conditions that could potentially be useful for toxicity screening and in evaluating ecological risk of soil, plant, and mammalian microbiome.

Antifouling Systems Based on a Polyhedral Oligomeric Silsesquioxane-Based Hexyl Imidazolium Salt Adsorbed on Copper Nanoparticles Supported on Titania

The reaction of octakis(3-chloropropyl)octasilsesquioxane with four equivalents of 1-hexylimidazole or 1-decylimidazole gave two products labelled as HQ-POSS (hexyl-imidazolium quaternized POSS) and DQ-POSS (decyl-imidazolium quaternized POSS) as regioisomer mixtures. An investigation of the biological activity of these two compounds revealed the higher antimicrobial performances of HQ-POSS against Gram-positive and Gram-negative microorganisms, proving its broad-spectrum activity. Due to its very viscous nature, HQ-POSS was adsorbed in variable amounts on the surface of biologically active oxides to gain advantages regarding the expendability of such formulations from an applicative perspective. Titania and 5 wt% Cu on titania were used as supports. The materials 10HQ-POSS/Ti and 15HQ-POSS/5CuTi strongly inhibited the ability of Pseudomonas PS27 cells-a bacterial strain described for its ability to handle very toxic organic solvents and perfluorinated compounds-to grow as planktonic cells. Moreover, the best formulations (i.e., 10HQ-POSS/Ti and 15HQ-POSS/5CuTi) could prevent Pseudomonas PS27 biofilm formation at a certain concentration (250 μg mL^-1) which greatly impaired bacterial planktonic growth. Specifically, 15HQ-POSS/5CuTi completely impaired cell adhesion, thus successfully prejudicing biofilm formation and proving its suitability as a potential antifouling agent. Considering that most studies deal with quaternary ammonium salts (QASs) with long alkyl chains (>10 carbon atoms), the results reported here on hexylimidazolium-based POSS further deepen the knowledge of QAS formulations which can be used as antifouling compounds.

Enhancement of perfluorooctanoic acid and perfluorooctane sulphonic acid removal in constructed wetland using iron mineral: Performance and mechanisms

Polyfluoroalkyl substance (PFAS) pose a threat to the aquatic environment due to their environmental persistence. The removal of PFAS using constructed wetlands (CWs) has received interest, but the adsorption saturation and limited removal capacity of the substrate is frequently challenging. To enhance the microbial degradation and performance of the substrate, different configurations of iron minerals were used as substrate to remove perfluorooctane sulphonic acid (PFOS) and perfluorooctanoic acid (PFOA) from CWs. The addition of iron minerals resulted in elimination of 57.2% and 63.9% of PFOS and PFOA in the effluent, respectively, which were 35.0% and 36.8% higher than that of control. Moreover, up to 85.4%, 86%, and 85.1% of NH₄⁺, NO₃^-, and phosphorus, respectively, was removed using iron minerals. The enhanced electron transfer in iron mineral-based CWs was confirmed by a 61.2% increase in cytochrome C reductase content and an increased Fe(III)/Fe(II) ratio. Microbial analysis showed that the proportions of microbes with PFAS removal capacity (e.g. Burkholderiae and Pseudomonas), and the key pathways of the TCA cycle and glycolysis were increased in iron mineral-based CW. Based on these findings, we conclude that supplementation with iron mineral could enhance PFOA and PFOS removal in CWs.

Recent trends in degradation strategies of PFOA/PFOS substitutes

The global elimination and restriction of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), respectively, have urged manufacturers to shift production to their substitutes which still pose threat to the environment with their bioaccumulation, toxicity and migration issues. In this context, efficient technologies and systematic mechanistic studies on the degradation of PFOA/PFOS substitutes are highly desirable. In this review, we summarize the progress in degrading PFOA/PFOS substitutes, including four kinds of mainstream methods. The pros and cons of the present technologies are analyzed, which renders the discussion of future prospects on rational optimizations. Additional discussion is made on the differences in the degradation of various kinds of substitutes, which is compared to the PFOA/PFOS and derives designing principles for more degradable F-containing compounds.

Sublethal Exposure of Per- and Polyfluoroalkyl Substances of Varying Chain Length and Polar Functionality Results in Distinct Metabolic Responses in Daphnia magna

Per- and polyfluoroalkyl substances (PFAS) are a class of persistent organic pollutants used in industrial applications because of their physicochemical properties, which results in their ubiquitous presence across environmental matrices. To date, legacy PFAS have been well studied; however, the concentration of alternative PFAS may exceed the concentration of legacy pollutants, and more information is needed regarding the sublethal toxicity at the molecular level of aquatic model organisms, such as Daphnia magna. Perfluorobutanoic acid (PFBA), perfluorohexanoic acid (PFHxA), perfluorohexanesulfonic acid (PFHxS), and perfluorononanoic acid (PFNA) are four widely detected PFAS alternatives of varying chain length and polar functionality that are quantified in aquatic environments. The present study examines the metabolic perturbations of PFAS with varying chemistries to D. magna using targeted mass spectrometry-based metabolomics. Daphnia were acutely exposed to sublethal concentrations of PFBA, PFHxA, PFHxS, and PFNA before the polar metabolite profile was extracted from single organisms. Multivariate analysis demonstrated significant separation between the sublethal concentrations of PFHxA, PFHxS, and PFNA relative to the controls; in sum, longer chain lengths demonstrated greater overall perturbations to the extracted metabolic profiles. Univariate statistics revealed significant perturbations in the concentrations of several amino acids, nucleotides/nucleosides, and neurotransmitters with exposure to PFAS. These metabolic perturbations are consistent with disruptions in energy metabolism (pantothenate and coenzyme A metabolism, histidine metabolism) and protein synthesis (aminoacyl-transfer RNA biosynthesis and amino acid metabolism), which were identified through biochemical pathway analysis. These results provide evidence that although PFAS chemistry (chain length and polar functional group) invokes unique metabolic responses, there is also an underlying toxic mode of action that is common with select PFAS exposure. Overall, the present study highlights the capabilities of environmental metabolomics to elucidate the molecular-level perturbations of pollutants within the same chemical class to model aquatic organisms, which can be used to prioritize risk assessment of substituted PFAS alternatives. Environ Toxicol Chem 2023;42:242-256. © 2022 SETAC.

Sources, occurrence, and treatment techniques of per- and polyfluoroalkyl substances in aqueous matrices: A comprehensive review

Per- and polyfluoroalkyl substances (PFAS), a class of synthetic organic pollutants, have prompted concerns about their global prevalence and possible health effects. This review consolidates the most recent data on different aspects of PFAS, such as their occurrence, and prominent sources. The current literature analysis of PFAS occurrence suggests significant variation in their concentration ranging from 0.025 to 1.2 × 10⁸ ng/L in wastewater, 0.01 to 8.9 × 10⁵ ng/L in surface water, and <0.01 to 1.3 × 10⁴ ng/L in groundwater globally. Since conventional treatment techniques are inadequate in remediating PFAS, innovative treatment approaches based on their removal or mineralization mechanism have been comprehensively reviewed. Advanced treatment technologies have shown degradation or removal of PFAS to be around 6 and > 99.9% in different aqueous matrices. However, due to significant drawbacks in their applicability in wastewater treatment plants (WWTPs), a novel treatment train approach has emerged as an effective alternative. This approach synergistically integrates multiple remediation techniques while addressing the impediments of individual treatments. Furthermore, nanofiltration (NF270) combined with electrochemical degradation has been demonstrated to be the most efficient (>98%) treatment train approach in PFAS remediation. If implemented in WWTPs, nanofiltration followed by adsorption using activated carbon is also a viable method for PFAS removal.

Perfluorinated alkyl substances affect the growth, physiology and root proteome of hydroponically grown maize plants

Poly- and perfluorinated alkyl substances (PFAS) are a group of persistent organic pollutants causing serious global concern. Plants can accumulate PFAS but their effect on plant physiology, especially at the molecular level is not very well understood. Hence, we used hydroponically-grown maize plants treated with a combination of eleven different PFAS (each at 100 μg L^-1) to investigate their bioaccumulation and effects on the growth, physiology and their impact on the root proteome. A dose-dependent decrease in root growth parameters was evidenced with a significant reduction in the relative growth rate, fresh weight of leaves and roots and altered photosynthetic parameters in PFAS-treated plants. Higher concentration of shorter PFAS (C < 8) was detected in the leaves, while long-chain PFAS (C ≥ 8) were more retained in roots. From the root proteome analysis, we identified 75 differentially abundant proteins, mostly involved in cellular metabolic and biosynthetic processes, translation and cytoskeletal reorganization. Validating the altered protein abundance using quantitative real-time PCR, the results were further substantiated using amino acid and fatty acid profiling, thus, providing first insight into the altered metabolic state of plants exposed to PFAS from a proteomics perspective.

Recent progress and challenges on the removal of per- and poly-fluoroalkyl substances (PFAS) from contaminated soil and water

Currently, due to an increase in urbanization and industrialization around the world, a large volume of per- and poly-fluoroalkyl substances (PFAS) containing materials such as aqueous film-forming foam (AFFF), protective coatings, landfill leachates, and wastewater are produced. Most of the polluted wastewaters are left untreated and discharged into the environment, which causes high environmental risks, a threat to human beings, and hampered socioeconomic growth. Developing sustainable alternatives for removing PFAS from contaminated soil and water has attracted more attention from policymakers and scientists worldwide under various conditions. This paper reviews the recent emerging technologies for the degradation or sorption of PFAS to treat contaminated soil and water. It highlights the mechanisms involved in removing these persistent contaminants at a molecular level. Recent advances in developing nanostructured and advanced reduction remediation materials, challenges, and perspectives in the future are also discussed. Among the variety of nanomaterials, modified nano-sized iron oxides are the best sorbents materials due to their specific surface area and photogenerated holes and appear extremely promising in the remediation of PFAS from contaminated soil and water.

A Review on Removal and Destruction of Per- and Polyfluoroalkyl Substances (PFAS) by Novel Membranes

Per- and Polyfluoroalkyl Substances (PFAS) are anthropogenic chemicals consisting of thousands of individual species. PFAS consists of a fully or partly fluorinated carbon–fluorine bond, which is hard to break and requires a high amount of energy (536 kJ/mole). Resulting from their unique hydrophobic/oleophobic nature and their chemical and mechanical stability, they are highly resistant to thermal, chemical, and biological degradation. PFAS have been used extensively worldwide since the 1940s in various products such as non-stick household items, food-packaging, cosmetics, electronics, and firefighting foams. Exposure to PFAS may lead to health issues such as hormonal imbalances, a compromised immune system, cancer, fertility disorders, and adverse effects on fetal growth and learning ability in children. To date, very few novel membrane approaches have been reported effective in removing and destroying PFAS. Therefore, this article provides a critical review of PFAS treatment and removal approaches by membrane separation systems. We discuss recently reported novel and effective membrane techniques for PFAS separation and include a detailed discussion of parameters affecting PFAS membrane separation and destruction. Moreover, an estimation of cost analysis is also included for each treatment technology. Additionally, since the PFAS treatment technology is still growing, we have incorporated several future directions for efficient PFAS treatment.

Conservation state of two paintings in the Santa Margherita cliff cave: role of the environment and of the microbial community

The conservation of ancient paintings sited in humid environments is an actual challenge for restorers, because it needs the knowledge of the materials the paintings are made up and of their interaction with a peculiar surrounding environment; thus, tailored procedures and strategies aimed at restoring and preserving paintings are necessary. Santa Margherita's cave in Castellammare del Golfo (Trapani, Italy) is a natural cave, containing the remains of paintings, in a poor state of conservation, belonging to an ancient church dated back to the Middle Age. The present manuscript reports the monitoring of environmental conditions (i.e., temperature and humidity) in a full year, as well as a study on the materials constituting the stone support and the paintings together with a survey of the microbial community. The findings allow us to define the causes that mainly involve the degradation of the paintings. In detail, the degradation of the east and the west walls occurred differently because of the exposure to the sea aerosol, which influenced the salt composition, also contributing to diversifying the bacterial community. Some specific actions to plan the conservation and restoration of paintings and to preserve the site are suggested.

Removal potential of multiple perfluoroalkyl acids (PFAAs) by submerged macrophytes in aquatic environments: Tolerance of Vallisneria natans and PFAA removal in submerged macrophyte-microbiota systems

Perfluoroalkyl acids (PFAAs) have emerged as a global concern in aquatic environment remediation due to their abundance, persistence, bioaccumulation, and toxicity. To comprehensively understand the removal potential of multiple PFAAs by submerged macrophytes in aquatic environments, systematic investigations into the tolerance of the typical submerged macrophyte Vallisneria natans to 12 typical PFAAs and the removal capacity to PFAAs in V. natans-microbiota systems were carried out. Results showed that although PFAAs could induce the accumulation of hydrogen peroxide and malondialdehyde, V. natans was overall resistant to multiple PFAAs with natural concentrations. Catalase is one of the main strategies of V. natans to alleviate PFAA stress. Microbiota can remove 18.10-30.84% of the PFAAs from the water column. 24.35-73.45% of PFAAs were removed from water in V. natans-microbiota systems. The uptake of plant tissues and the bioaccumulation of microbiota were proposed as the main removal processes. The removal rates were significantly correlated with the perfluorinated carbon atoms numbers (p < 0.05). PFAAs and V. natans increased the relative abundance of Betaproteobacteria, Nostocales, Microscillaceae, Sphingobacteriales, SBR1031, Chlamydiales, Phycisphaerae, Caldilineales, Rhodobacterales, and Verrucomicrobiales. The present study suggested that V. natans can be a potential species to remove multiple PFAAs in aquatic environments, and further providing insights into the PFAAs' remediation.

Bioremediation of perfluorochemicals: current state and the way forward

Perfluorochemicals are widely found in the environment due to their versatile uses and persistent nature. Perfluorochemicals have also been detected in human and animals due to direct or indirect exposures, giving rise to health concerns. This review aims to examine the bioremediation of perfluorochemicals with plants, bacteria and fungi, including their efficiency and limitations. It also aims to propose the future prospects of bioremediation of perfluorochemicals. This review retrieved peer-reviewed journal articles published between 2010 and 2021 from journal databases consisting of Web of Science, Scopus and ScienceDirect. This review shows that multiple Pseudomonas species could degrade perfluorochemicals particularly perfluoroalkyl acids under aerobic condition. Acidimicrobium sp. degraded perfluoroalkyl acids anaerobically in the presence of electron donors. A mixed Pseudomonas culture was more effective than pure cultures. Multiple plants were found to bioconcentrate perfluorochemicals and many demonstrated the ability to hyperaccumulate perfluoroalkyl acids, particularly Festuca rubra, Salix nigra and Betula nigra. Fungal species, particularly Pseudeurotium sp. and Geomyces sp., have the potential to degrade perfluorooctanoic acid or perfluorooctane sulphonic acid. Perfluorochemicals bioremediation could be advanced with identification of more candidate species for bioremediation, optimization of bioremediation conditions, mixed culturing, experiments with environmental media and studies on the biochemical pathways of biotransformation. This review provides comprehensive insight into the efficiency of different bacterial, plant and fungal species in perfluorochemicals bioremediation under different conditions, their limitations and improvement.

PFAS Molecules: A Major Concern for the Human Health and the Environment

Per- and polyfluoroalkyl substances (PFAS) are a group of over 4700 heterogeneous compounds with amphipathic properties and exceptional stability to chemical and thermal degradation. The unique properties of PFAS compounds has been exploited for almost 60 years and has largely contributed to their wide applicability over a vast range of industrial, professional and non-professional uses. However, increasing evidence indicate that these compounds represent also a serious concern for both wildlife and human health as a result of their ubiquitous distribution, their extreme persistence and their bioaccumulative potential. In light of the adverse effects that have been already documented in biota and human populations or that might occur in absence of prompt interventions, the competent authorities in matter of health and environment protection, the industries as well as scientists are cooperating to identify the most appropriate regulatory measures, substitution plans and remediation technologies to mitigate PFAS impacts. In this review, starting from PFAS chemistry, uses and environmental fate, we summarize the current knowledge on PFAS occurrence in different environmental media and their effects on living organisms, with a particular emphasis on humans. Also, we describe present and provisional legislative measures in the European Union framework strategy to regulate PFAS manufacture, import and use as well as some of the most promising treatment technologies designed to remediate PFAS contamination in different environmental compartments.

Trends in the Regulation of Per- and Polyfluoroalkyl Substances (PFAS): A Scoping Review

Products containing per- and polyfluoroalkyl substances (PFAS) have been used for decades in industrial and consumer products. These compounds are persistent in the environment, bioaccumulative, and some are toxic to humans and other animals. Since the early 2000s, laws, policies, and regulations have been implemented to reduce the prevalence of PFAS in the environment and exposures to PFAS. We conducted a scoping literature review to identify how PFAS are regulated internationally, at the U.S. national level, and at the U.S. state level, as well as drivers of and challenges to implementing PFAS regulations in the U.S. This review captured peer-reviewed scientific literature (e.g., PubMed), grey literature databases (e.g., SciTech Premium Collection), Google searches, and targeted websites (e.g., state health department websites). We identified 454 relevant documents, of which 61 discussed the non-U.S. PFAS policy, 214 discussed the U.S. national-level PFAS policy, and 181 discussed the U.S. state-level PFAS policy. The drivers of and challenges to PFAS regulation were identified through qualitative analysis. The drivers of PFAS policy identified were political support for regulation, social awareness of PFAS, economic resource availability, and compelling scientific evidence. The challenges to implementing PFAS regulations were political limitations, economic challenges, unclear scientific evidence, and practical challenges. The implications for PFAS policy makers and other stakeholders are discussed.

Understanding the Impact of Perfluorinated Compounds on Cardiovascular Diseases and Their Risk Factors: A Meta-Analysis Study

Perfluorinated compounds (PFCs) are non-biodegradable synthetic chemical compounds that are widely used in manufacturing many household products. Many studies have reported the association between PFCs exposure with the risk of developing cardiovascular diseases (CVDs). However, those reports are still debatable, due to their findings. Thus, this review paper aimed to analyse the association of PFCs compound with CVDs and their risk factors in humans by systematic review and meta-analysis. Google Scholar, PubMed and ScienceDirect were searched for PFCs studies on CVDs and their risk from 2009 until present. The association of PFCs exposure with the prevalence of CVDs and their risk factors were assessed by calculating the quality criteria, odds ratios (ORs), and 95% confidence intervals (CIs). CVDs risk factors were divided into serum lipid profile (main risk factor) and other known risk factors. The meta-analysis was then used to derive a combined OR test for heterogeneity in findings between studies. Twenty-nine articles were included. Our meta-analysis indicated that PFCs exposure could be associated with CVDs (Test for overall effect: z = 2.2, p = 0.02; Test for heterogeneity: I² = 91.6%, CI = 0.92–1.58, p < 0.0001) and their risk factors (Test for overall effect: z = 4.03, p < 0.0001; Test for heterogeneity: I² = 85.8%, CI = 1.00–1.14, p < 0.0001). In serum lipids, total cholesterol levels are frequently reported associated with the exposure of PFCs. Among PFCs, perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) exposure increased the risk of CVDs than other types of PFCs. Although the risk of PFOA and PFOS were positively associated with CVDs and their risk factors, more observational studies shall be carried out to identify the long-term effects of these contaminants in premature CVDs development in patients.

Loading, transport, and treatment of emerging chemical and biological contaminants of concern in stormwater

Stormwater is a largely uncontrolled source of pollution in rural and urban environments across the United States. Concern regarding the growing diversity and abundance of pollutants in stormwater, as well as their impacts on water quality, has grown significantly over the past several decades. In addition to conventional contaminants like nutrients and heavy metals, stormwater is a well-documented source of many contaminants of emerging concern, which can be toxic to both aquatic and terrestrial organisms and remain a barrier to maintaining high quality water resources. Chemical pollutants like pharmaceuticals and personal care products, industrial pollutants such as per- and polyfluoroalkyl substances, and tire wear particles in stormwater are of great concern due to their toxic, genotoxic, mutagenic and carcinogenic properties. Emerging microbial contaminants such as pathogens and antibiotic resistance genes also represent significant threats to environmental water quality and human health. Knowledge regarding the transport, behavior, and the remediation capacity of these pollutants in runoff is key for addressing these pollutants in situ and minimizing ecosystem perturbations. To this end, this review paper will analyze current understanding of these contaminants in stormwater runoff in terms of their transport, behavior, and bioremediation potential.

Fate and transport of per- and polyfluoroalkyl substances (PFASs) in the vadose zone

Per- and polyfluoroalkyl substances (PFASs) are a heterogeneous group of persistent organic pollutants that have been detected in various environmental compartments around the globe. Emerging research has revealed the preferential accumulation of PFASs in shallow soil horizons, particularly at sites impacted by firefighting activities, agricultural applications, and atmospheric deposition. Once in the vadose zone, PFASs can sorb to soil, accumulate at interfaces, become volatilized, be taken up in biota, or leach to the underlying aquifer. At the same time, polyfluorinated precursor species may transform into highly recalcitrant perfluoroalkyl acids, changing their chemical identity and thus transport behavior along the way. In this review, we critically discuss the current state of the knowledge and aim to interconnect the complex processes that control the fate and transport of PFASs in the vadose zone. Furthermore, we identify key challenges and future research needs. Consequently, this review may serve as an interdisciplinary guide for the risk assessment and management of PFAS-contaminated sites.

Challenges and Current Status of the Biological Treatment of PFAS-Contaminated Soils

Per- and polyfluoroalkyl substances (PFAS) are Synthetic Organic Compounds (SOCs) which are of current concern as they are linked to a myriad of adverse health effects in mammals. They can be found in drinking water, rivers, groundwater, wastewater, household dust, and soils. In this review, the current challenge and status of bioremediation of PFAs in soils was examined. While several technologies to remove PFAS from soil have been developed, including adsorption, filtration, thermal treatment, chemical oxidation/reduction and soil washing, these methods are expensive, impractical for in situ treatment, use high pressures and temperatures, with most resulting in toxic waste. Biodegradation has the potential to form the basis of a cost-effective, large scale in situ remediation strategy for PFAS removal from soils. Both fungal and bacterial strains have been isolated that are capable of degrading PFAS; however, to date, information regarding the mechanisms of degradation of PFAS is limited. Through the application of new technologies in microbial ecology, such as stable isotope probing, metagenomics, transcriptomics, and metabolomics there is the potential to examine and identify the biodegradation of PFAS, a process which will underpin the development of any robust PFAS bioremediation technology.

Transcriptomic response of Gordonia sp. strain NB4-1Y when provided with 6:2 fluorotelomer sulfonamidoalkyl betaine or 6:2 fluorotelomer sulfonate as sole sulfur source

Abstract

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are environmental contaminants of concern. We previously described biodegradation of two PFAS that represent components and transformation products of aqueous film-forming foams (AFFF), 6:2 fluorotelomer sulfonamidoalkyl betaine (6:2 FTAB) and 6:2 fluorotelomer sulfonate (6:2 FTSA), by Gordonia sp. strain NB4-1Y. To identify genes involved in the breakdown of these compounds, the transcriptomic response of NB4-1Y was examined when grown on 6:2 FTAB, 6:2 FTSA, a non-fluorinated analog of 6:2 FTSA (1-octanesulfonate), or MgSO₄, as sole sulfur source. Differentially expressed genes were identified as those with ± 1.5 log₂-fold-differences (± 1.5 log₂FD) in transcript abundances in pairwise comparisons. Transcriptomes of cells grown on 6:2 FTAB and 6:2 FTSA were most similar (7.9% of genes expressed ± 1.5 log₂FD); however, several genes that were expressed in greater abundance in 6:2 FTAB treated cells compared to 6:2 FTSA treated cells were noted for their potential role in carbon–nitrogen bond cleavage in 6:2 FTAB. Responses to sulfur limitation were observed in 6:2 FTAB, 6:2 FTSA, and 1-octanesulfonate treatments, as 20 genes relating to global sulfate stress response were more highly expressed under these conditions compared to the MgSO₄ treatment. More highly expressed oxygenase genes in 6:2 FTAB, 6:2 FTSA, and 1-octanesulfonate treatments were found to code for proteins with lower percent sulfur-containing amino acids compared to both the total proteome and to oxygenases showing decreased expression. This work identifies genetic targets for further characterization and will inform studies aimed at evaluating the biodegradation potential of environmental samples through applied genomics.

Graphic Abstract

Electronic supplementary material

The online version of this article (10.1007/s10532-020-09917-8) contains supplementary material, which is available to authorized users.

A combined physical-chemical and microbiological approach to unveil the fabrication, provenance, and state of conservation of the Kinkarakawa-gami art

Kinkarakawa-gami wallpapers are unique works of art produced in Japan between 1870 and 1905 and exported in European countries, although only few examples are nowadays present in Europe. So far, neither the wallpapers nor the composing materials have been characterised, limiting the effective conservation–restoration of these artefacts accounting also for the potential deteriogen effects of microorganisms populating them. In the present study, four Kinkarakawa-gami wallpapers were analysed combining physical–chemical and microbiological approaches to obtain information regarding the artefacts’ manufacture, composition, dating, and their microbial community. The validity of these methodologies was verified through a fine in blind statistical analysis, which allowed to identify trends and similarities within these important artefacts. The evidence gathered indicated that these wallpapers were generated between 1885 and 1889, during the so-called industrial production period. A wide range of organic (proteinaceous binders, natural waxes, pigments, and vegetable lacquers) and inorganic (tin foil and pigments) substances were used for the artefacts’ manufacture, contributing to their overall complexity, which also reflects on the identification of a heterogeneous microbiota, often found in Eastern environmental matrices. Nevertheless, whether microorganisms inhabiting these wallpapers determined a detrimental or protective effect is not fully elucidated yet, thus constituting an aspect worth to be explored to deepen the knowledge needed for the conservation of Kinkarakawa-gami over time.

Mononuclear Perfluoroalkyl-Heterocyclic Complexes of Pd(II): Synthesis, Structural Characterization and Antimicrobial Activity

Two mononuclear Pd(II) complexes [PdCl₂(pfptp)] (1) and [PdCl₂(pfhtp)] (2), with ligands 2-(3-perfluoropropyl-1-methyl-1,2,4-triazole-5yl)-pyridine (pfptp) and 2-(3-perfluoroheptyl-1-methyl-1,2,4-triazole-5yl)-pyridine (pfhtp), were synthesized and structurally characterized. The two complexes showed a bidentate coordination of the ligand occurring through N atom of pyridine ring and N4 atom of 1,2,4-triazole. Both complexes showed antimicrobial activity when tested against both Gram-negative and Gram-positive bacterial strains.

A New Water-Soluble Bactericidal Agent for the Treatment of Infections Caused by Gram-Positive and Gram-Negative Bacterial Strains

Grapefruit and lemon pectin obtained from the respective waste citrus peels via hydrodynamic cavitation in water only are powerful, broad-scope antimicrobials against Gram-negative and -positive bacteria. Dubbed IntegroPectin, these pectic polymers functionalized with citrus flavonoids and terpenes show superior antimicrobial activity when compared to commercial citrus pectin. Similar to commercial pectin, lemon IntegroPectin determined ca. 3-log reduction in Staphylococcus aureus cells, while an enhanced activity of commercial citrus pectin was detected in the case of Pseudomonas aeruginosa cells with a minimal bactericidal concentration (MBC) of 15 mg mL⁻¹. Although grapefruit and lemon IntegroPectin share equal MBC in the case of P. aeruginosa cells, grapefruit IntegroPectin shows boosted activity upon exposure of S. aureus cells with a 40 mg mL⁻¹ biopolymer concentration affording complete killing of the bacterial cells. Insights into the mechanism of action of these biocompatible antimicrobials and their effect on bacterial cells, at the morphological level, were obtained indirectly through Fourier Transform Infrared spectroscopy and directly through scanning electron microscopy. In the era of antimicrobial resistance, these results are of great societal and sanitary relevance since citrus IntegroPectin biomaterials are also devoid of cytotoxic activity, as already shown for lemon IntegroPectin, opening the route to the development of new medical treatments of polymicrobial infections unlikely to develop drug resistance.

Formulation of Mesoporous Silica Nanoparticles for Controlled Release of Antimicrobials for Stone Preventive Conservation

The biotic deterioration of artifacts of archaeological and artistic interest mostly relies on the action of microorganisms capable of thriving under the most disparate environmental conditions. Thus, to attenuate biodeterioration phenomena, biocides can be used by the restorers to prevent or slow down the microbial growth. However, several factors such as biocide half-life, its wash-out because of environmental conditions, and its limited time of action make necessary its application repeatedly, leading to negative economic implications. Sound and successful treatments are represented by controlled release systems (CRSs) based on porous materials. Here, we report on the design and development of a CRS system based on mesoporous silica nanoparticles (MSNs), as a carrier, and loaded with a biocide. MSNs, with a diameter of 55 nm and cylindrical pores of ca. 3-8 nm arranged as parallel arrays concerning the NP diameter, and with 422 m²/g of specific surface area were synthesized by the sol-gel method assisted by oil in water emulsion. Biocide loading and release were carried out in water and monitored by UV-Vis Spectroscopy; in addition, microbiological assay was performed using as control the MCM-41 mesoporous silica loaded with the same biocide. The role of specific supramolecular interaction in regulating the release is discussed. Further, we demonstrated that this innovative formulation was useful in inhibiting the in vitro growth of Kocuria rhizophila, an environmental Gram-positive bacterial strain. Besides, the CRS here prepared reduced the bacterial biomass contaminating a real case study (i.e., stone derived from the Santa Margherita cave located in Sicily, Italy), after several months of treatment thus opening for innovative treatments of deteriorated stone artifacts.

New Synthetic Nitro-Pyrrolomycins as Promising Antibacterial and Anticancer Agents

Pyrrolomycins (PMs) are polyhalogenated antibiotics known as powerful biologically active compounds, yet featuring high cytotoxicity. The present study reports the antibacterial and antitumoral properties of new chemically synthesized PMs, where the three positions of the pyrrolic nucleus were replaced by nitro groups, aiming to reduce their cytotoxicity while maintaining or even enhancing the biological activity. Indeed, the presence of the nitro substituent in diverse positions of the pyrrole determined an improvement of the minimal bactericidal concentration (MBC) against Gram-positive (i.e., Staphylococcus aureus) or -negative (i.e., Pseudomonas aeruginosa) pathogen strains as compared to the natural PM-C. Moreover, some new nitro-PMs were as active as or more than PM-C in inhibiting the proliferation of colon (HCT116) and breast (MCF 7) cancer cell lines and were less toxic towards normal epithelial (hTERT RPE-1) cells. Altogether, our findings contribute to increase the knowledge of the mode of action of these promising molecules and provide a basis for their rationale chemical or biological manipulation.