Biodegradation of Allethrin by a Novel Fungus Fusarium proliferatum Strain CF2, Isolated from Contaminated Soils

Pesticides in the environment: Degradation routes, pesticide transformation products and ecotoxicological considerations

Among rising environmental concerns, emerging contaminants constitute a variety of different chemicals and biological agents. The composition, residence time in environmental media, chemical interactions, and toxicity of emerging contaminants are not fully known, and hence, their regulation becomes problematic. Some of the important groups of emerging contaminants are pesticides and pesticide transformation products (PTPs), which present a considerable obstacle to maintaining and preserving ecosystem health. This review article aims to thoroughly comprehend the occurrence, fate, and ecotoxicological importance of pesticide transformation products (PTPs). The paper provides an overview of pesticides and PTPs as contaminants of emerging concern and discusses the modes of degradation of pesticides, their properties and associated risks. The degradation of pesticides, however, does not lead to complete destruction but can instead lead to the generation of PTPs. The review discusses the properties and toxicity of PTPs and presents the methods available for their detection. Moreover, the present study examines the existing regulatory framework and suggests the need for the development of new technologies for easy, routine detection of PTPs to regulate them effectively in the environment.

Growth, tolerance, and enzyme activities of Trichoderma strains in culture media added with a pyrethroids-based insecticide

The application of pyrethroids and carbamates represents an environmental risk and may exert adverse effects on beneficial microorganisms such as Trichoderma, which contribute to the biocontrol of several fungal phytopathogens. This research evaluated the tolerance of several strains of Trichoderma to a selected culture medium contaminated with a commercial insecticide (H24®) composed of pyrethroids, permethrin and prallethrin, and carbamate propoxur, and determined the influence of this insecticide on the release of enzymes such as chitinases, peroxidases, and endoglucanases by a consortium of selected Trichoderma strains grown in liquid culture medium. Four out of 10 Trichoderma strains showed tolerance to 200ppm (∼48.3% of growth) of the commercial insecticide after 96h of exposure to a contaminated solid medium. After eight days of growth in liquid culture, the insecticide enhanced extracellular protein content and peroxidase activities in the Trichoderma consortium but decreased both chitinase and glucanase activities. These fungal responses should be considered when implementing strategies that combine alternative pesticides and fungal biocontrollers for managing fungal phytopathogens.

Microbial detoxification of bifenthrin insecticide by selected fungal strains and optimizing conditions using response surface methodology for agricultural sustainability

Bifenthrin is a type I broad spectrum pyrethroid insecticide widely employed in urban and agricultural settings with little knowledge about its biodegradation. Bifenthrin was subjected to a 35 days incubation period in which it was degraded by five fungal strains named as Aspergillus niger, Aspergillus flavus, Aspergillus fumigatus, Penicillium chrysogenum, and Lasiodiplodia theobromae. Penicillium chrysogenum was found to be extremely effective in degrading bifenthrin up to 85%. Furthermore, response surface methodology (RSM) with Box-Behnken design is applied to optimize the degradation conditions with varying pH, temperature (°C), and incubation time (days). The p value < 0.05 in the response surface design and analysis of variance showed the significance of the reaction parameters. The ideal conditions for Penicillium chrysogenum to break down bifenthrin (10 mgL-1) were found to be 30 °C, pH 7, and a 24 days incubation period. In eutrophic conditions and a glucose-rich media, this fungus co-metabolized bifenthrin. By hydrolytically cleaving the carboxyl ester bond, the Penicillium chrysogenum breaks down bifenthrin, as shown by the chromatogram of four metabolites from GCMS. The biodegradation of bifenthrin by strain Penicillium chrysogenum and its use in agronomic situations are now well understood as per the findings of this study.

Recent advances in fungal xenobiotic metabolism: enzymes and applications

Fungi have been extensively studied for their capacity to biotransform a wide range of natural and xenobiotic compounds. This versatility is a reflection of the broad substrate specificity of fungal enzymes such as laccases, peroxidases and cytochromes P450, which are involved in these reactions. This review gives an account of recent advances in the understanding of fungal metabolism of drugs and pollutants such as dyes, agrochemicals and per- and poly-fluorinated alkyl substances (PFAS), and describes the key enzymes involved in xenobiotic biotransformation. The potential of fungi and their enzymes in the bioremediation of polluted environments and in the biocatalytic production of important compounds is also discussed.

New frontiers of soil fungal microbiome and its application for biotechnology in agriculture

The fungi-based technology provided encouraging scenarios in the transition from a conventionally based economic system to the potential security of sources closely associated with the agricultural sphere such as the agriculture. In recent years, the intensification of fungi-based processes has generated significant gains, additionally to the production of materials with significant benefits and strong environmental importance. Furthermore, the growing concern for human health, especially in the agriculture scenario, has fostered the investigation of organisms with high biological and beneficial potential for use in agricultural systems. Accordingly, this study offered a comprehensive review of the diversity of the soil fungal microbiome and its main applications in a biotechnological approach aimed at agriculture and food chain-related areas. Moreover, the spectrum of opportunities and the extensive optimization platform for obtaining fungi compounds and metabolites are discussed. Finally, future perspectives regarding the insurgency of innovations and challenges on the broad rise of visionary solutions applied to the biotechnology context are provided.

Isolation and identification of the endophytic fungus J2-3 and its disease-preventive and growth-promoting effects on cucumber

There are many problems that result from the use of a large number of chemical pesticides to control plant diseases, including pathogenic bacteria resistance, environmental contamination, and human health effects. Recently, endophytic fungi have become a significant source of bioactive fungicide products and an invaluable resource for excavating microbial pesticides. In this study, endophytic fungi with biocontrol potential were isolated and screened from Mikania micrantha leaves, stems, and roots. Fifty endophytic fungi were isolated and their antagonistic activity was studied in vitro using the confrontation culture method. The J2-3 strains from stems exhibit broad-spectrum and high activity. The strain's biological characteristics were determined by various culture conditions, and it was identified as Fusarium proliferatum by both morphological and ITS sequence analysis. Biological characteristics of the J2-3 strain were also tested. The optimum temperature for mycelium growth and sporulation was 25 °C and 30 °C, respectively. For mycelium growth, starch was the optimum carbon source, and peptone was the optimum nitrogen source for sucrose, mycelium growth, and sporulation. Mycelium growth was killed by a temperature of 60 °C, and sporulation was killed by a temperature of 55 °C. The light aided mycelium growth, and the light alternated between light and dark cycles for sporulation. Further, pot experiments were conducted to determine the antagonistic and viable effects of highly antagonistic strains on cucumber. The spore suspension's final control efficacy on cucumber wilt disease was up to 62.79% and it also promoted cucumber growth significantly. The results show that the entophytic fungus J2-3 from M. micrantha can protect cucumbers from wilt disease and promote growth.

Global distribution of pesticides in freshwater resources and their remediation approaches

The role of pesticides in enhancing global agricultural production is magnificent. However, their unmanaged use threatens water resources and individual health. A significant pesticide concentration leaches to groundwater or reaches surface waters through runoff. Water contaminated with pesticides may cause acute or chronic toxicity to impacted populations and exert adverse environmental effects. It necessitates the monitoring and removing pesticides from water resources as prime global concerns. This work reviewed the global occurrences of pesticides in potable water and discussed the conventional and advanced technologies for the removal of pesticides. The concentration of pesticides highly varies in freshwater resources across the globe. The highest concentration of α-HCH (6.538 μg/L, at Yucatan, Mexico), lindane (6.08 μg/L at Chilka lake, Odisha, India), 2,4, DDT (0.90 μg/L, at Akkar, Lebanon), chlorpyrifos (9.1 μg/L, at Kota, Rajasthan, India), malathion (5.3 μg/L, at Kota, Rajasthan, India), atrazine (28.0 μg/L, at Venado Tuerto City, Argentina), endosulfan (0.78 μg/L, at Yavtmal, Maharashtra, India), parathion (4.17 μg/L, at Akkar, Lebanon), endrin (3.48 μg/L, at KwaZuln-Natl Province, South Africa) and imidacloprid (1.53 μg/L, at Son-La province, Vietnam) are reported. Pesticides can be significantly removed through physical, chemical, and biological treatment. Mycoremediation technology has the potential for up to 90% pesticide removal from water resources. Complete removal of the pesticides through a single biological treatment approach such as mycoremediation, phytoremediation, bioremediation, and microbial fuel cells is still a challenging task, however, the integration of two or more biological treatment approaches can attain complete removal of pesticides from water resources. Physical methods along with oxidation methods can be employed for complete removal of pesticides from drinking water.

Microbial degradation and transformation of benzo[a]pyrene by using a white-rot fungus Pleurotus eryngii F032

Polycyclic aromatic hydrocarbons (PAHs) are environmentally recalcitrant contaminants formed from naturally or incomplete combustion of organic materials and some of them are difficult to degrade due to their hydrophobicity and persistency. Benzo [a]pyrene (BaP), is one of PAHs that having five fused benzene and reported as mutagenic, carcinogenic and teratogenic compounds. Biodegradation is one of promising techniques due to its relatively low economic cost and microorganism is a natural capacity to consume hydrocarbons. In this investigation, Pleurotus eryngii F032 was grown in 20 mL of modified mineral salt broth (MSB) supplemented with BaP under static and agitated culture. Within 20 days, static culture removed 59% of BaP, whereas agitated culture removed the highest amount (73%). To expedite BaP elimination, the mechanism and behavior of BaP biosorption and biotransformation by Pleurotus eryngii F032 were additionally examined by gas chromatography-mass spectrometer (GC-MS). The optimal conditions for P. eryngii F032 to eliminate BaP were 25 °C, a C/N ratio of 8, pH 3 and 0.2% inoculum concentration. At an initial BaP content of 10 mg/L, more than 50% was effectively eliminated within 20 days under these conditions. Salinity, glucose, and rhamnolipids were the most important factors impacting BaP biodegradation. GC-MS found degradation products such as BaP-3,6-quinone, indicating plausible metabolic routes. Finally, it may be assumed that the primary mechanism by which white-rot fungi eliminate BaP is by the utilization of biotransformation enzymes such as laccase to mineralize the PAHs. Hence, Pleurotus eryngii F032 could be an ideal candidate to treat PAHs contaminated soils.

Neurotoxicity associated with oxidative stress and inflammasome gene expression induced by allethrin in SH-SY5Y cells

Pyrethroids, including allethrin, have largely been used as commercial insecticides. The toxicity of allethrin is little known, but it is assumed that, as occurs with other pyrethroids, it could cause alterations of the nervous system and pose both occupational and non-occupational health hazards. To evaluate the neurotoxicity of allethrin we used the MTT assay of SH-SY5Y neuroblastoma cells to determine cell viability. Dose-dependent reductions of cell viability served to compare the vehicle-group and the IC₅₀ for allethrin, which was 49.19 μM. ROS production increased significantly at concentrations of 10-200 μM of allethrin, and NO levels were significantly increased by the effect of allethrin at a minimum concentration of 50 μM. Lipid peroxidation increased by the effect of allethrin at concentrations of 25, 50, 100, and 200 μM. Caspase 3/7 activity was induced by allethrin concentrations of 50, 100, and 200 μM. Here, we suggest that allethrin might affect the inflammasome complex (Caspase-1, NLRP3, and PYDC1) and apoptosis (Bax and Bcl-2) gene expression by mRNA fold change expression levels shown in Caspase-1 (2.46-fold), NLRP3 (1.57-fold), PYDC1 (1.48-fold), and Bax (2.1-fold). These results demonstrated that allethrin induced neurotoxicity effects on SH-SY5Y cells through activation of inflammasome pathways, cell death, and oxidative stress.

Metolachlor adsorption using walnut shell biochar modified by soil minerals

The removal of pesticide residues in soil is a research hotspot. The metolachlor (MET) adsorption by walnut shell biochar (BC) modified with montmorillonite (MBC), illite (IBC), and kaolinite (KBC), as well as the original BC (OBC) was investigated. The characteristics of samples were studied by scanning electron microscopy and mapping analysis, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetry, and chemical stability analysis. The effects of the dosage, ionic strength, and pH, and determined the adsorption kinetics and isotherms for MET with the BCs were analyzed. In addition, response surface methodology regression model analysis was conducted and the adsorption mechanisms were investigated. The results showed that the thermal stability and chemical stability of MBC, IBC, and KBC were higher than those of OBC, and MBC had the greatest stability. The MET adsorption rates of OBC, MBC, IBC, and KBC were 62.15%, 92.47%, 87.97%, and 83.31%, respectively. The kinetic fitting results and adsorption mechanisms showed that the modification of BC with minerals enhanced the physical adsorption of MET. The maximum MET adsorption capacities by OBC, MBC, IBC, and KBC were 39.68 mg g^-1, 68.49 mg g^-1, 65.79 mg g^-1, and 65.36 mg g^-1, respectively. Hydrogen bonds, π-π bonds, coordination bonds, and hydrophobic interactions were the key adsorption mechanisms. Therefore, the mineral-modified BCs were characterized by high adsorption rates and stability. This approach can make BC more efficient, with higher performance as a low cost soil amendment.

Isolation, characterization and industrial application of a Cladosporium herbarum fungal strain able to degrade the fungicide imazalil

Imazalil (IMZ) is an imidazole fungicide commonly used by fruit-packaging plants (FPPs) to control fungal infections during storage. Its application leads to the production of pesticide-contaminated wastewaters, which, according to the European Commission, need to be treated on site. Considering the lack of efficient treatment methods, biodepuration systems inoculated with tailored-made inocula specialized on the removal of such persistent fungicides appear as an appropriate solution. However, nothing is known about the biodegradation of IMZ. We aimed to isolate and characterize microorganisms able to degrade the recalcitrant fungicide IMZ and eventually to test their removal efficiency under near practical bioengineering conditions. Enrichment cultures from a soil receiving regular discharges of effluents from a FPP, led to the isolation of a Cladosporium herbarum strain, which showed no pathogenicity on fruits, a trait essential for its biotechnological exploitation in FPPs. The fungus was able to degrade up to 100 mg L^-1 of IMZ. However, its degrading capacity and growth was reduced at increasing IMZ concentrations in a dose-dependent manner, suggesting the involvement of a detoxification rather than an energy-gain mechanism in the dissipation of IMZ. The isolate could tolerate and gradually degrade the fungicides fludioxonil (FLD) and thiabendazole (TBZ), also used in FPPs and expected to coincide alongside IMZ in FPP effluents. The capacity of the isolate to remove IMZ in a practical context was evaluated in a benchtop immobilized-cell bioreactor fed with artificial IMZ-contaminated wastewater (200 mg L^-1). The fungal strain established in the reactor, completely dominated the fungal community and effectively removed >96% of IMZ. The bioreactor also supported a diverse bacterial community composed of Sphingomonadales, Burkholderiales and Pseudomonadales. Our study reports the isolation of the first IMZ-degrading microorganism with high efficiency to remove IMZ from agro-industrial effluents under bioengineering conditions.

Exploration of Klebsiella pneumoniae M6 for paclobutrazol degradation, plant growth attributes, and biocontrol action under subtropical ecosystem

In recent times, injudicious use of paclobutrazol (PBZ) in mango orchards deteriorates the soil quality and fertility by persistence nature and causes a serious ecosystem imbalance. In this study, a new Klebsiella pneumoniae strain M6 (MW228061) was isolated from mango rhizosphere and characterized as a potent plant growth promoter, biocontrol, and PBZ degrading agent. The strain M6 efficiently utilizes PBZ as carbon, energy and nitrogen source and degrades up to 98.28% (50 mgL^-1 initial conc.) of PBZ at 15^th day of incubation in MS medium. In the soil system first order degradation kinetics and linear model suggested 4.5 days was the theoretical half-life (t_1/2 value) of PBZ with strain M6. Box Behnken design (BBD) model of Response surface methodology (RSM) showed pH 7.0, 31°C temperature, and 2.0 ml inoculum size (8 x 10⁹ CFU mL^-1) was optimized condition for maximum PBZ degradation with strain M6. Plant growth promoting attributes such as Zn, K, PO₄ solubilization IAA, HCN and NH₃ production of strain M6 showed positive results and were assessed quantitatively. The relation between plant growth promotion and PBZ degradation was analyzed by heat map, principal component analysis (PCA) and, clustal correlation analysis (CCA). Strain M6 was also showing a significant biocontrol activity against pathogenic fungi such as Fusarium oxysporum (MTCC–284), Colletotrichum gloeosporioides (MTCC– 2190), Pythium aphanidermatum (MTCC– 1024), Tropical race 1 (TR -1), and Tropical race 4 (TR -4). Hence, results of the study suggested that strain M6 can be utilized as an effective bio-agent to restore degraded land affected by persistent use of paclobutrazol.

Myco-remediation: A mechanistic understanding of contaminants alleviation from natural environment and future prospect

Industrialization and modernization of agricultural systems contaminated lithosphere, hydrosphere, and biosphere of the Earth. Sustainable remediation of contamination is essential for environmental sustainability. Myco-remediation is proposed to be a green, economical, and efficient technology over conventional remediation technologies to combat escalating pollution problems at a global scale. Fungi can perform remediation of pollutants through several mechanisms like biosorption, precipitation, biotransformation, and sequestration. Myco-remediation significantly removes or degrades metal metals, persistent organic pollutants, and other emerging pollutants. The current review highlights the species-specific remediation potential, influencing factors, genetic and molecular control mechanism, applicability merits to enhance the bioremediation efficiency. Structure and composition of fungal cell wall is crucial for immobilization of toxic pollutants and a subtle change on fungal cell wall structure may significantly affect the immobilization efficiency. The utilization protocol and applicability of enzyme engineering and myco-nanotechnology to enhance the bioremediation efficiency of any potential fungus was proposed. It is advocated that the association of hyper-accumulator plants with plant growth-promoting fungi could help in an effective cleanup strategy for the alleviation of persistent soil pollutants. The functions, activity, and regulation of fungal enzymes in myco-remediation practices required further research to enhance the myco-remediation potential. Study of the biotransformation mechanisms and risk assessment of the products formed are required to minimize environmental pollution. Recent advancements in molecular "Omic techniques"and biotechnological tools can further upgrade myco-remediation efficiency in polluted soils and water.

Novel Mechanism and Kinetics of Tetramethrin Degradation Using an Indigenous Gordonia cholesterolivorans A16

Tetramethrin is a pyrethroid insecticide that is commonly used worldwide. The toxicity of this insecticide into the living system is an important concern. In this study, a novel tetramethrin-degrading bacterial strain named A16 was isolated from the activated sludge and identified as Gordonia cholesterolivorans. Strain A16 exhibited superior tetramethrin degradation activity, and utilized tetramethrin as the sole carbon source for growth in a mineral salt medium (MSM). High-performance liquid chromatography (HPLC) analysis revealed that the A16 strain was able to completely degrade 25 mg·L⁻¹ of tetramethrin after 9 days of incubation. Strain A16 effectively degraded tetramethrin at temperature 20–40 °C, pH 5–9, and initial tetramethrin 25–800 mg·L⁻¹. The maximum specific degradation rate (q_max), half-saturation constant (K_s), and inhibition constant (K_i) were determined to be 0.4561 day⁻¹, 7.3 mg·L⁻¹, and 75.2 mg·L⁻¹, respectively. The Box–Behnken design was used to optimize degradation conditions, and maximum degradation was observed at pH 8.5 and a temperature of 38 °C. Five intermediate metabolites were identified after analyzing the degradation products through gas chromatography–mass spectrometry (GC-MS), which suggested that tetramethrin could be degraded first by cleavage of its carboxylester bond, followed by degradation of the five-carbon ring and its subsequent metabolism. This is the first report of a metabolic pathway of tetramethrin in a microorganism. Furthermore, bioaugmentation of tetramethrin-contaminated soils (50 mg·kg⁻¹) with strain A16 (1.0 × 10⁷ cells g⁻¹ of soil) significantly accelerated the degradation rate of tetramethrin, and 74.1% and 82.9% of tetramethrin was removed from sterile and non-sterile soils within 11 days, respectively. The strain A16 was also capable of efficiently degrading a broad spectrum of synthetic pyrethroids including D-cyphenothrin, chlorempenthrin, prallethrin, and allethrin, with a degradation efficiency of 68.3%, 60.7%, 91.6%, and 94.7%, respectively, after being cultured under the same conditions for 11 days. The results of the present study confirmed the bioremediation potential of strain A16 from a contaminated environment.

Fipronil degradation kinetics and resource recovery potential of Bacillus sp. strain FA4 isolated from a contaminated agricultural field in Uttarakhand, India

This study investigates the potential role of Bacillus sp. FA4 for the bioremediation of fipronil in a contaminated environment and resource recovery from natural sites. The degradation parameters for fipronil were optimized using response surface methodology (RSM): pH - 7.0, temperature - 32 °C, inocula - 6.0 × 10⁸ CFU mL^-1, and fipronil concentration - 50 mg L^-1. Degradation of fipronil was confirmed in the mineral salt medium (MSM), soil, immobilized agar discs, and sodium alginate beads. The significant reduction of the half-life of fipronil suggested that the strain FA4 could be used for the treatment of large-scale fipronil degradation from contaminated environments. The kinetic parameters, such as q_max, K_s, and K_i for fipronil degradation with strain FA4, were 0.698 day^-1, 12.08 mg L^-1, and 479.35 mg L^-1, respectively. Immobilized FA4 cells with sodium alginate and agar disc beads showed enhanced degradation with reductions in half-life at 7.83 and 7.34 days, respectively. The biodegradation in soil further confirmed the degradation potential of strain FA4 with a half-life of 7.40 days as compared to the sterilized soil control's 169.02 days. The application of the strain FA4 on fipronil degradation, under different in vitro conditions, showed that the strain could be used for bioremediation and resource recovery of contaminated wastewater and soil in natural contaminated sites.

Biodegradation of crude oil by immobilized Exiguobacterium sp. AO-11 and shelf life evaluation

Exiguobacterium sp. AO-11 was immobilized on bio-cord at 10⁹ CFU g⁻¹ carrier for the removal of crude oil from marine environments. To prepare a ready-to-use bioremediation product, the shelf life of the immobilized cells was calculated. Approximately 90% of 0.25% (v/v) crude oil removal was achieved within 9 days when the starved state of immobilized cells was used. The oil removal activity of the immobilized cells was maintained in the presence of oil dispersant (89%) and at pH values of 7–9. Meanwhile, pH, oil concentration and salinity affected the oil removal efficacy. The immobilized cells could be reused for at least 5 cycles. The Arrhenius equation describing the relationship between the rate of reaction and temperature was validated as a useful model of the kinetics of retention of activity by an immobilized biocatalyst. It was estimated that the immobilized cells could be stored in a non-vacuum bag containing phosphate buffer (pH 7.0) at 30 °C for 39 days to retain the cells at 10⁷ CFU g⁻¹ carrier and more than 50% degradation activity. These results indicated the potential of using bio-cord-immobilized crude oil-degrading Exiguobacterium sp. AO-11 as a bioremediation product in a marine environment.

Dissipation Behavior, Residue, and Risk Assessment of Benziothiazolinone in Apples

Benziothiazolinone is the first independently developed fungicide in China. It has been used to effectively control fungal diseases in a variety of fruits, vegetables, and crops. In this study, the degradation behavior and final residue of benziothiazolinone in apples is discussed, and the dietary risk to consumers was evaluated. High-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used to determine benziothiazolinone residues in apple samples from eight different regions of China. The average recovery of benziothiazolinone in apples was 85.5-100.2%, and the relative standard deviation (RSD) was 0.8-14.9%. The limits of the method of quantification of benziothiazolinone in apples was 0.01 mg/kg. Under good agricultural practices (GAP) conditions, the final residues of benziothiazolinone in apples were below 0.01 mg/kg, lower than the maximum residual limit (MRL) of China. Although the degradation half-lives of benziothiazolinone were 23.9 d-33.0 d, the risk quotient (RQ) of benziothiazolinone was 15.5% by calculating the national estimated daily intake and comparing it with the acceptable daily intake. These results suggested that under GAP conditions, the intake of benziothiazolinone from apples exhibits an acceptably low health risk on consumers.

New Role for a Commercially Available Bioinsecticide: Bacillus thuringiensis Berliner Biodegrades the Pyrethroid Cypermethrin

The microbial diversity of several environments has been explored by researchers for the biodegradation of pyrethroids. In this study, a new approach was employed aiming at the use of Bacillus thuringiensis Berliner, a strain commercially available as bioinsecticide, for Cypermethrin (Cyp) biodegradation. This bacterial strain grew in the presence of Cyp and biodegraded this xenobiotic in a liquid medium. A central composite design for surface response methodology was employed for biodegradation. Under optimized conditions (50 mg·L^-1 of Cyp, pH 8.5, 37 °C), 83.5% biodegradation was determined with the production of 12.0 ± 0.6 mg·L^-1 3-phenoxybenzoic acid after 5 days. Moreover, a biodegradation pathway with the 18 compounds identified by GC-MS and LC-MS/MS was proposed. Experiments in soil for 28 days at 30 °C were performed, and 16.7% Cyp degradation was determined under abiotic conditions, whereas 36.6 ± 1.9% biodegradation was observed for B. thuringiensis Berliner with the native microbiome, indicating that bioaugmentation with this strain promoted a significant increase in the Cyp decontamination. Therefore, B. thuringiensis Berliner can act as biodegrader agent and insecticide at the same time, promoting decontamination of chemicals as Cyp while maintaining the protection of crops against insects. Moreover, B. thuringiensis species can produce bacteriocins with antifungal activity, which may increase agricultural productivity.

New insights into the degradation of synthetic pollutants in contaminated environments

The environment is contaminated by synthetic contaminants owing to their extensive applications globally. Hence, the removal of synthetic pollutants (SPs) from the environment has received widespread attention. Different remediation technologies have been investigated for their abilities to eliminate SPs from the ecosystem; these include photocatalysis, sonochemical techniques, nanoremediation, and bioremediation. SPs, which can be organic or inorganic, can be degraded by microbial metabolism at contaminated sites. Owing to their diverse metabolisms, microbes can adapt to a wide variety of environments. Several microbial strains have been reported for their bioremediation potential concerning synthetic chemical compounds. The selection of potential strains for large-scale removal of organic pollutants is an important research priority. Additionally, novel microbial consortia have been found to be capable of efficient degradation owing to their combined and co-metabolic activities. Microbial engineering is one of the most prominent and promising techniques for providing new opportunities to develop proficient microorganisms for various biological processes; here, we have targeted the SP-degrading mechanisms of microorganisms. This review provides an in-depth discussion of microbial engineering techniques that are used to enhance the removal of both organic and inorganic pollutants from different contaminated environments and under different conditions. The degradation of these pollutants is investigated using abiotic and biotic approaches; interestingly, biotic approaches based on microbial methods are preferable owing to their high potential for pollutant removal and cost-effectiveness.

Microbial glycoconjugates in organic pollutant bioremediation: recent advances and applications

The large-scale application of organic pollutants (OPs) has contaminated the air, soil, and water. Persistent OPs enter the food supply chain and create several hazardous effects on living systems. Thus, there is a need to manage the environmental levels of these toxicants. Microbial glycoconjugates pave the way for the enhanced degradation of these toxic pollutants from the environment. Microbial glycoconjugates increase the bioavailability of these OPs by reducing surface tension and creating a solvent interface. To date, very little emphasis has been given to the scope of glycoconjugates in the biodegradation of OPs. Glycoconjugates create a bridge between microbes and OPs, which helps to accelerate degradation through microbial metabolism. This review provides an in-depth overview of glycoconjugates, their role in biofilm formation, and their applications in the bioremediation of OP-contaminated environments.

Biotechnological basis of microbial consortia for the removal of pesticides from the environment

The application of microbial strains as axenic cultures has frequently been employed in a diverse range of sectors. In the natural environment, microbes exist as multispecies and perform better than monocultures. Cell signaling and communication pathways play a key role in engineering microbial consortia, because in a consortium, the microorganisms communicate via diffusible signal molecules. Mixed microbial cultures have gained little attention due to the lack of proper knowledge about their interactions with each other. Some ideas have been proposed to deal with and study various microbes when they live together as a community, for biotechnological application purposes. In natural environments, microbes can possess unique metabolic features. Therefore, microbial consortia divide the metabolic burden among strains in the group and robustly perform pesticide degradation. Synthetic microbial consortia can perform the desired functions at naturally contaminated sites. Therefore, in this article, special attention is paid to the microbial consortia and their function in the natural environment. This review comprehensively discusses the recent applications of microbial consortia in pesticide degradation and environmental bioremediation. Moreover, the future directions of synthetic consortia have been explored. The review also explores the future perspectives and new platforms for these approaches, besides highlighting the practical understanding of the scientific information behind consortia.

Carbofuran toxicity and its microbial degradation in contaminated environments

Carbofuran is one of the most toxic broad-spectrum and systemic N-methyl carbamate pesticide, which is extensively applied as insecticide, nematicide and acaricide for agricultural, domestic and industrial purposes. It is extremely lethal to mammals, birds, fish and wildlife due to its anticholinesterase activity, which inhibits acetyl-cholinesterase and butyrylcholinesterse activity. In humans, carbofuran is associated with endocrine disrupting activity, reproductive disorders, cytotoxic and genotoxic abnormalities. Therefore, cleanup of carbofuran-contaminated environments is of utmost concern and urgently needs an adequate, advanced and effective remedial technology. Microbial technology (bacterial, fugal and algal species) is a very potent, pragmatic and ecofriendly approach for the removal of carbofuran. Microbial enzymes and their catabolic genes exhibit an exceptional potential for bioremediation strategies. To understand the specific mechanism of carbofuran degradation and involvement of carbofuran hydrolase enzymes and genes, highly efficient genomic approaches are required to provide reliable information and unfold metabolic pathways. This review briefly discusses the carbofuran toxicity and its toxicological impact into the environment, in-depth understanding of carbofuran degradation mechanism with microbial strains, metabolic pathways, molecular mechanisms and genetic basis involved in degradation.

Binding interaction of allethrin with esterase: Bioremediation potential and mechanism

The main aim of this work was to study the allethrin binding interactions with esterase and its bioremediation potential using an isolated bacterial strain CW7, identified as Pseudomonas nitroreducens. The degradation conditions with strain CW7 were optimized using response surface methodology at pH 7.0, a temperature of 32 °C, and an inocula concentration of 150 mg·L^-1, with 96% allethrin degradation observed over 7 days. The kinetic parameters q_max, K_s, and K_i were calculated to be 0.512 day^-1, 4.97 mg·L^-1, and 317.13 mg·L^-1, respectively. Nine intermediate metabolites were identified after analysing the degradation products by gas chromatography-mass spectrometry. Strain CW7 effectively degraded a wide variety of pyrethroids as a carbon source. Molecular modeling, docking, and enzyme kinetics were used to investigate the binding pocket of the esterase containing amino acids such as alanine, arginine, valine, proline, cysteine, glycine, isoleucine, phenylalanine, serine, asparagine, and threonine, which play active roles in allethrin degradation.

Biodegradation and metabolic pathway of fenvalerate by Citrobacter freundii CD-9

Fenvalerate is a pyrethroid insecticide with rapid action, strong targeting, broad spectrum, and high efficiency. However, continued use of fenvalerate has resulted in its widespread presence as a pollutant in surface streams and soils, causing serious environmental pollution. Pesticide residues in the soil are closely related to food safety, yet little is known regarding the kinetics and metabolic behaviors of fenvalerate. In this study, a fenvalerate-degrading microbial strain, CD-9, isolated from factory sludge, was identified as Citrobacter freundii based on morphological, physio-biochemical, and 16S rRNA sequence analysis. Response surface methodology analysis showed that the optimum conditions for fenvalerate degradation by CD-9 were pH 6.3, substrate concentration 77 mg/L, and inoculum amount 6% (v/v). Under these conditions, approximately 88% of fenvalerate present was degraded within 72 h of culture. Based on high-performance liquid chromatography and gas chromatography-mass spectrometry analysis, ten metabolites were confirmed after the degradation of fenvalerate by strain CD-9. Among them, o-phthalaldehyde is a new metabolite for fenvalerate degradation. Based on the identified metabolites, a possible degradation pathway of fenvalerate by C. freundii CD-9 was proposed. Furthermore, the enzyme localization method was used to study CD-9 bacteria and determine that its degrading enzyme is an intracellular enzyme. The degradation rate of fenvalerate by a crude enzyme solution for over 30 min was 73.87%. These results showed that strain CD-9 may be a suitable organism to eliminate environmental pollution by pyrethroid insecticides and provide a future reference for the preparation of microbial degradation agents and environmental remediation.

Characterization of a Novel Quorum-Quenching Bacterial Strain, Burkholderia anthina HN-8, and Its Biocontrol Potential against Black Rot Disease Caused by Xanthomonas campestris pv. campestris

Diffusible signal factor (DSF) is a type of cis unsaturated fatty acid, with a chemical structure of 11-methyl-2-dodecylene acid. DSF is widely conserved in a variety of Gram-negative bacterial pathogens and is involved in the regulation of pathogenic virulence. Quorum quenching (QQ) is a promising strategy for preventing and controlling quorum sensing (QS)-mediated bacterial infections by interfering with the QS system of pathogens. In this study, a novel DSF-degrading bacterium, Burkholderia anthina strain HN-8, was isolated and characterized for its degradation ability and potential biocontrol of black rot disease caused by Xanthomonas campestris pv. campestris (Xcc). The HN-8 strain exhibited superb DSF degradation activity and completely degraded 2 mM DSF within 48 h. In addition, we present the first evidence of bacterium having a metabolic pathway for the complete degradation and metabolism of DSF. Analysis of DSF metabolic products by gas chromatography–mass spectrometry led to the identification of dodecanal as the main intermediate product, revealing that DSF could be degraded via oxidation–reduction. Furthermore, application of strain HN-8 as a potent biocontrol agent was able to significantly reduce the severity of black rot disease in radishes and Chinese cabbage. Taken together, these results shed light on the QQ mechanisms of DSF, and they provide useful information showing the potential for the biocontrol of infectious diseases caused by DSF-dependent bacterial pathogens.

Insights into the Toxicity and Degradation Mechanisms of Imidacloprid Via Physicochemical and Microbial Approaches

Imidacloprid is a neonicotinoid insecticide that has been widely used to control insect pests in agricultural fields for decades. It shows insecticidal activity mainly by blocking the normal conduction of the central nervous system in insects. However, in recent years, imidacloprid has been reported to be an emerging contaminant in all parts of the world, and has different toxic effects on a variety of non-target organisms, including human beings, due to its large-scale use. Hence, the removal of imidacloprid from the ecosystem has received widespread attention. Different remediation approaches have been studied to eliminate imidacloprid residues from the environment, such as oxidation, hydrolysis, adsorption, ultrasound, illumination, and biodegradation. In nature, microbial degradation is one of the most important processes controlling the fate of and transformation from imidacloprid use, and from an environmental point of view, it is the most promising means, as it is the most effective, least hazardous, and most environmentally friendly. To date, several imidacloprid-degrading microbes, including Bacillus, Pseudoxanthomonas, Mycobacterium, Rhizobium, Rhodococcus, and Stenotrophomonas, have been characterized for biodegradation. In addition, previous studies have found that many insects and microorganisms have developed resistance genes to and degradation enzymes of imidacloprid. Furthermore, the metabolites and degradation pathways of imidacloprid have been reported. However, reviews of the toxicity and degradation mechanisms of imidacloprid are rare. In this review, the toxicity and degradation mechanisms of imidacloprid are summarized in order to provide a theoretical and practical basis for the remediation of imidacloprid-contaminated environments.

Understanding Phytomicrobiome: A Potential Reservoir for Better Crop Management

Recent crop production studies have aimed at an increase in the biotic and abiotic tolerance of plant communities, along with increased nutrient availability and crop yields. This can be achieved in various ways, but one of the emerging approaches is to understand the phytomicrobiome structure and associated chemical communications. The phytomicrobiome was characterized with the advent of high-throughput techniques. Its composition and chemical signaling phenomena have been revealed, leading the way for “rhizosphere engineering”. In addition to the above, phytomicrobiome studies have paved the way to best tackling soil contamination with various anthropogenic activities. Agricultural lands have been found to be unbalanced for crop production. Due to the intense application of agricultural chemicals such as herbicides, fungicides, insecticides, fertilizers, etc., which can only be rejuvenated efficiently through detailed studies on the phytomicrobiome component, the phytomicrobiome has recently emerged as a primary plant trait that affects crop production. The phytomicrobiome also acts as an essential modifying factor in plant root exudation and vice versa, resulting in better plant health and crop yield both in terms of quantity and quality. Not only supporting better plant growth, phytomicrobiome members are involved in the degradation of toxic materials, alleviating the stress conditions that adversely affect plant development. Thus, the present review compiles the progress in understanding phytomicrobiome relationships and their application in achieving the goal of sustainable agriculture.

Insights Into the Microbial Degradation and Biochemical Mechanisms of Neonicotinoids

Neonicotinoids are derivatives of synthetic nicotinoids with better insecticidal capabilities, including imidacloprid, nitenpyram, acetamiprid, thiacloprid, thiamethoxam, clothianidin, and dinotefuran. These are mainly used to control harmful insects and pests to protect crops. Their main targets are nicotinic acetylcholine receptors. In the past two decades, the environmental residues of neonicotinoids have enormously increased due to large-scale applications. More and more neonicotinoids remain in the environment and pose severe toxicity to humans and animals. An increase in toxicological and hazardous pollution due to the introduction of neonicotinoids into the environment causes problems; thus, the systematic remediation of neonicotinoids is essential and in demand. Various technologies have been developed to remove insecticidal residues from soil and water environments. Compared with non-bioremediation methods, bioremediation is a cost-effective and eco-friendly approach for the treatment of pesticide-polluted environments. Certain neonicotinoid-degrading microorganisms, including Bacillus, Mycobacterium, Pseudoxanthomonas, Rhizobium, Rhodococcus, Actinomycetes, and Stenotrophomonas, have been isolated and characterized. These microbes can degrade neonicotinoids under laboratory and field conditions. The microbial degradation pathways of neonicotinoids and the fate of several metabolites have been investigated in the literature. In addition, the neonicotinoid-degrading enzymes and the correlated genes in organisms have been explored. However, few reviews have focused on the neonicotinoid-degrading microorganisms along with metabolic pathways and degradation mechanisms. Therefore, this review aimed to summarize the microbial degradation and biochemical mechanisms of neonicotinoids. The potentials of neonicotinoid-degrading microbes for the bioremediation of contaminated sites were also discussed.