Accessing Metals from Low-Grade Ores and the Environmental Impact Considerations: A Review of the Perspectives of Conventional versus Bioleaching Strategies

Cyanide and cyanidation wastes management in gold leaching plants in Siaya County, Kenya

This study assesses cyanide and cyanidation wastes management practices among small, medium and large-scale gold leaching plants in Siaya County, Kenya. The socio-economic benefits of gold extraction through cyanidation of mercury-contaminated tailings notwithstanding, the study establishes inadequate cyanide and cyanidation wastes management practices which could potentially cause significant environmental and human health impacts. Through structured key-informant interviews with operators from 15 selected gold leaching plants of varying scales of operation, along with field observations, and quantitative analysis utilizing both bivariate and inferential statistical tools, the study reveals inadequacies in cyanide, cyanidation wastewater, and tailings management practices. Key findings highlight widespread contravention of the international cyanide management standards and lack of adoption of advanced cyanidation wastes treatment technologies. Moreover, the study examines Political, Economic, Social, Technological, Environmental, and Legal factors as external factors affecting the management of cyanidation wastes. Consequently, the study recommends adoption of comprehensive cyanide management practices as outlined in the Cyanide Code and technological upgrades to mitigate potential environmental and human health impacts, and enhance regulatory compliance in gold cyanidation. In a nutshell, this study underscores the urgent need for stringent enforcement of environmental and mining industry laws and regulations in order to protect the environment and public health in gold mining regions. These measures are vitally important to ensure responsible mining practices and uphold environmental stewardship while promoting economic growth.

Review of methods for alumina recovery from mudstone and coal fly ash

Developing recovery methods from coal mine waste like mudstone and coal fly ash (CFA) is crucial to expanding the alumina supply beyond bauxite. This review explores various approaches for alumina recovery from mudstone and CFA. Six main leaching techniques are discussed-caustic soda, nitric acid, Sulphuric acid, hydrochloric acid, and leaching roasted coal mine wastes. Due to high silica content, these techniques differ from those for bauxite minerals. Alkaline solutions, like sodium and calcium hydroxide, show promise but are cost-intensive. Sulphuric acid, combined with calcium hydroxide or sodium carbonate before roasting, yields efficient results, surpassing 90 % recovery. Microbial extraction also shows promise, but commercialisation faces equipment accessibility challenges. Heat treatment and optimal calcination temperatures are crucial, especially with acid reagents like Sulphuric and hydrochloric acids, preferred for insolubility in silica and better recovery. Sustainable alumina recovery requires further research into economically viable and ecologically friendly technology. This review underscores the need for feasible, high-purity alumina recovery techniques from mudstone and CFA for industrialisation.

Investigation of arsenic contamination in soil and plants along the river of Xinzhou abandoned gold mine in Qingyuan, China

The exploitation of mineral resources is very important for economic development, but disorderly exploitation poses a serious threat to the ecological environment. However, investigations on the advantages of plant species and environmental pollution in polluted mining areas are limited. Thus, a survey was conducted to evaluate the impacts of abandoned mines on the surrounding ecological environment along rivers in polluted areas and to determine the Arsenic (As) pollution status in soil and plants. The results showed that the soil and vegetation along the river in the survey area were seriously polluted by As. The total As content of the 15 samples was significantly greater than the national soil background value (GB 15618-2018), and degree of pollution was nonlinearly related to the distance from the mine source, R2 = 0.9844. B. bipinnata, P. vittata and B. nivea were predominant with degrees of dominance of 0.01-0.33, 0.05-0.11, and 0.06-0.14 respectively. The As enrichment capacities of Juncus and P. vittata were significantly greater than those of the other plants, while the bioaccumulation factors (BCFs) were 21.81 and 7.04, respectively.

Reuse and Mechanochemical Processing of Ore Dressing Tailings Used for Extracting Pb and Zn

The increasing accumulation of rock waste obtained due to ore processing and its environmental impacts, such as acid mine drainage and elevated concentrations of heavy metals in soils, necessitates the transformation of mining technologies based on the concept of circular waste management. The research is aimed at improving the parameters of the mechanical activation effect produced on technogenic georesources, as well as at expanding the application scope of disintegrators in the field of using the partial backfill of the mined-out space when developing stratified deposits. In this regard, the research purpose was to substantiate the parameters of extracting metals from enrichment tailings using their mechanochemical activation to ensure cyclic waste management. The research involved the application of three-dimensional interpolation methods used for processing the data and the graphical representation. As a result, the following was found to be characteristic of the waste of the Sadonsky mine management. The degree of extracting zinc from pre-activated tailings increases logarithmically when the H2SO4 concentration and the NaCl proportion decrease 3.5 times. The degree of extracting lead from the activated tailings increases according to the Fourier law when decreasing the NaCl mass concentration, and an optimal range of the H2SO4 (0.38-0.51%) proportion decreases six times. One of the key results of the research is the justification of expanding the scope of applying disintegrators in the case of a directed activation influence exerted on the components of the stowing strips. The obtained results expand the understanding of the mechanism of the influence of the mechanochemical activation of dry tailings on the reactivity unevenness when extracting several metals from them.

Influence of surfactant on the permeability at different positions of a leaching column

To solve the problems of poor permeability and low leaching rate in ore heap leaching, solid surface physical chemistry, seepage mechanics theory for porous media, CT scanning and SEM were used to carry out column leaching tests with a homemade segmented removable plexiglass column; the variation law for the permeability coefficients of each segment of the leaching column before and after leaching was analyzed. The experimental results showed that there was little difference in the permeability coefficient of ore at different heights before leaching. After leaching, the permeability coefficients were unevenly distributed along the column height, and the lowest value was located at the bottom of the leaching column. The addition of surfactant provided an obvious improvement in the permeability of the leaching column. The permeability coefficient at the bottom of the leaching column was 6% higher than that of the control group. At the same time, the addition of surfactant increased the leaching rate of ore by nearly 10%. A theoretical analysis showed that the surfactant improved the permeability of ore heaps mainly by preventing physical blockage by fine particles and inhibiting deposition of chemical products.

Bulk flotation followed by selective leaching with biogenic ferric iron is a promising solution for eco-friendly processing of complex sulfidic ores

The development of cost-effective environmentally friendly technologies is of current importance for the intensification of metal recovery. Here, we propose a new direction in the use of a two-step process for the treatment of complex sulfidic ores. In the first step, ore flotation allows the obtainment of a bulk copper-zinc concentrate and low-toxicity waste. In the second step, zinc is selectively extracted by chemical leaching with a biogenic ferric iron solution, while copper is accumulated in the leach residue. Importantly, the efficiency of this step depends on the chemical and mineralogical composition of polymetallic concentrates. Four samples of the copper-zinc sulfide concentrate with various contents of copper and zinc have been leached in multiple cycles at 80 °C, 10% of pulp density, and pH 1.3-1.5. The leaching of the concentrate that contained 14.7% of copper and 5.0% of zinc for three leaching cycles (total duration, 5.75 h) allowed the obtainment of a leach residue containing 15.3 and 0.14% of copper and zinc, respectively. At the same time, the leaching of another concentrate that contained 19.2% of copper and 2.64% of zinc after one leaching cycle (total duration, 0.67 h) led to copper and zinc contents of 19.1 and 0.72%, respectively, in the leach residue. Therefore, the treatment of only two concentrates allowed the obtainment of high-grade copper concentrates containing low amounts of zinc. Ferric iron, the oxidant of sulfide minerals, was fully regenerated in leachate within 30-35 h at 40 °C using an acidophilic microbial community dominated by Leptospirillum ferriphilum, Sulfobacillus spp., and Ferroplasma acidiphilum. The loss of copper and zinc in solid waste of the bioregeneration did not exceed 1.0% and 1.8%, respectively. The proposed flowsheet of bulk concentrate processing has several important advantages over conventional technologies, including short duration of leaching, formation of low-toxicity solid waste, and pyrometallurgical processing of only high-grade copper concentrates. This approach can be a promising solution for the efficient processing of polymetallic bulk concentrates.

The “Infernaccio” Gorges: Microbial Diversity of Black Deposits and Isolation of Manganese-Solubilizing Bacteria

Simple Summary

“Infernaccio” gorges are one of the Earth’s hidden habitats in Central Italy. Beyond the deep incisions and high slopes, these gorges are characterized by black deposits in gorge walls and covering rock surfaces. Several geological events have shaped these unique geological formations and their microbiota. This study investigated microbial contribution to black deposit formation and isolating Mn-oxide-solubilizing bacteria. Our results provided evidence of the putative role of Bacteria and Archaea in forming manganese oxide deposits. Findings also showed that these deposits are a source of valuable strains with manganese oxide bioleaching properties, essential for bioremediation and metal recovery.

Abstract

The present study explored the microbial diversity of black deposits found in the “Infernaccio” gorge. X-ray Powdered Diffraction (XRPD) was used to investigate the crystallinity of the samples and to identify the minerals. Scanning electron microscope and energy-dispersive X-ray spectroscopy (SEM-EDS) were used to detect the bacterial imprints, analyze microbe–mineral interactions, and highlight the chemical element distribution in the black deposits. 16S rRNA gene metabarcoding allowed the study of Archaea and Bacteria communities. Mn-oxide-solubilizing isolates were also obtained and characterized by culturable and molecular approaches. The multidisciplinary approach showed the occurrence of deposits composed of birnessite, diopside, halloysite, and leucite. Numerous bacterial imprints confirmed the role of microorganisms in forming these deposits. The Bacteria and Archaea communities associated with these deposits and runoff waters are dynamic and shaped by seasonal changes. The uncultured and unknown taxa are the most common and abundant. These amplicon sequence variants (ASVs) were mainly assigned to Proteobacteria and Bacteroidetes phyla. Six isolates showed interesting Mn solubilization abilities under microaerophilic conditions. Molecular characterization associated isolates to Brevibacterium, Bacillus, Neobacillus, and Rhodococcus genera. The findings enriched our knowledge of geomicrobiological aspects of one of the Earth’s hidden habitats. The study also unveiled the potential of this environment as an isolation source of biotechnologically relevant bacteria.