Fast Detection of 10 Cannabinoids by RP-HPLC-UV Method in Cannabis sativa L

Development and validation of a quantitative method for the analysis of delta-9-tetrahydrocannabinol (delta-9-THC), delta-8-tetrahydrocannabinol (delta-8-THC), delta-9-tetrahydrocannabinolic acid (THCA), and cannabidiol (CBD) in botanicals, edibles, liquids, oils, waxes, and bath products by gas chromatography mass spectrometry (GC/MS)

A quantitative gas chromatography mass spectrometry (GC/MS) method was developed for delta-9-tetrahydrocannabinol (delta-9-THC), delta-8-tetrahydrocannabinol (delta-8-THC), tetrahydrocannabinolic acid (THCA), and cannabidiol (CBD) in matrices including plant material, liquids and oils, waxes, edibles, and bath and body products. Samples were prepared by homogenization, extraction of the cannabinoids into solvent, liquid/liquid extraction, and derivatization. The GC/MS method was validated from 0.15% to 5.00% (weight basis) to encompass the 0.3% legal distinction between hemp and marijuana. Validation was performed assessing imprecision/bias, calibration model, recovery, interferences, limit of detection, matrix matching, carryover, accuracy, and an assessment of CBD conversion to delta-9-THC. The calibration curves were quadratic weighted 1/x with r2 > 0.990. The method had a detection limit of 0.075% in plant material for each analyte. Analyte recovery was greater than 70% in plant material. Carryover was not observed up to concentrations equivalent to 100% analyte, and no forensically significant conversion of CBD to delta-9-THC was observed. One cannabinoid isomer, 9(R)-delta-7-tetrahydrocannabinol (9(R)-delta-7-THC), was determined to interfere with the quantitation of delta-9-THC, but could be differentiated based on mass spectrum. The method was determined to be suitable for quantitation of delta-9-THC, delta-8-THC, delta-9-THCA, and CBD and was able to differentiate hemp samples from marijuana samples.

Phytocannabinoids in neuromodulation: From omics to epigenetics

BACKGROUND

Recent developments in metabolomics, transcriptomic and epigenetics open up new horizons regarding the pharmacological understanding of phytocannabinoids as neuromodulators in treating anxiety, depression, epilepsy, Alzheimer's, Parkinson's disease and autism.

METHODS

The present review is an extensive search in public databases, such as Google Scholar, Scopus, the Web of Science, and PubMed, to collect all the literature about the neurobiological roles of cannabis extract, cannabidiol, 9-tetrahydrocannabinol specially focused on metabolomics, transcriptomic, epigenetic, mechanism of action, in different cell lines, induced animal models and clinical trials. We used bioinformatics, network pharmacology and enrichment analysis to understand the effect of phytocannabinoids in neuromodulation.

RESULTS

Cannabidomics studies show wide variability of metabolites across different strains and varieties, which determine their medicinal and abusive usage, which is very important for its quality control and regulation. CB receptors interact with other compounds besides cannabidiol and Δ9-tetrahydrocannabinol, like cannabinol and Δ8-tetrahydrocannabinol. Phytocannabinoids interact with cannabinoid and non-cannabinoid receptors (GPCR, ion channels, and PPAR) to improve various neurodegenerative diseases. However, its abuse because of THC is also a problem found across different epigenetic and transcriptomic studies. Network enrichment analysis shows CNR1 expression in the brain and its interacting genes involve different pathways such as Rap1 signalling, dopaminergic synapse, and relaxin signalling. CBD protects against diseases like epilepsy, depression, and Parkinson's by modifying DNA and mitochondrial DNA in the hippocampus. Network pharmacology analysis of 8 phytocannabinoids revealed an interaction with 10 (out of 60) targets related to neurodegenerative diseases, with enrichment of ErbB and PI3K-Akt signalling pathways which helps in ameliorating neuro-inflammation in various neurodegenerative diseases. The effects of phytocannabinoids vary across sex, disease state, and age which suggests the importance of a personalized medicine approach for better success.

CONCLUSIONS

Phytocannabinoids present a range of promising neuromodulatory effects. It holds promise if utilized in a strategic way towards personalized neuropsychiatric treatment. However, just like any drug irrational usage may lead to unforeseen negative effects. Exploring neuro-epigenetics and systems pharmacology of major and minor phytocannabinoid combinations can lead to success.

Development and validation of an HPLC-DAD method for the quantification of cannabigerol, cannabidiol, cannabinol and cannabichromene in human plasma and mouse matrices

Cannabigerol, cannabidiol, cannabinol and cannabichromene are non-psychoactive phytocannabinoids, highly present in Cannabis sativa, for which numerous therapeutical applications have been described. However, additional pre-clinical and clinical data, including toxicopharmacokinetic and pharmacodynamic studies, remain required to support their use in clinical practice and new therapeutic applications. To support these studies, a new high performance liquid chromatography technique (HPLC) with diode-array detection (DAD) was developed and validated to quantify these cannabinoids in human plasma and mouse matrices. Sample extraction was accomplished by protein precipitation and double liquid-liquid extraction. Simvastatin and perampanel were used as internal standards in human and mouse matrices, respectively. Chromatographic separation was achieved in 16 min on an InfinityLab Poroshell® 120 C18 column (4.6 mm × 100 mm, 2.7 μm) at 40 °C. A mobile phase composed of water/acetonitrile was pumped with a gradient elution program at 1.0 mL min-1. The technique revealed linearity in the defined concentration ranges with a determination coefficient of over 0.99. Intra and inter-day accuracy and precision values ranged from -14.83 to 13.97% and 1.08 to 13.74%, respectively. Sample stability was assessed to ensure that handling and storage conditions did not compromise analyte concentrations in different matrices. Carry-over was absent and recoveries were over 77.31%. This technique was successfully applied for the therapeutic monitoring of cannabidiol and preliminary pre-clinical studies with cannabigerol and cannabidiol. All samples were within calibration ranges, with the exception of cannabigerol after intraperitoneal administration. This is the first HPLC-DAD technique that simultaneously quantifies cannabinoids in these biological matrices, supporting future pre-clinical and clinical investigations.

Comprehensive analyses of the ARF gene family in cannabis reveals their potential roles in regulating cannabidiol biosynthesis and male flower development

Background

Cannabidiol (CBD), as an important therapeutic property of the cannabis plants, is mainly produced in the flower organs. Auxin response factors (ARFs) are play a crucial role in flower development and secondary metabolite production. However, the specific roles of ARF gene family in cannabis remain unknown.

Methods

In this study, various bioinformatics analysis of CsARF genes were conducted using online website and bioinformatics, quantitative real time PCR technology was used to investigate the expression patterns of the CsARF gene family in different tissues of different cannabis varieties, and subcellular localization analysis was performed in tobacco leaf.

Results

In this study, 22 CsARF genes were identified and found to be unevenly distributed across 9 chromosomes of the cannabis genome. Phylogenetic analysis revealed that the ARF proteins were divided into 4 subgroups. Duplication analysis identified one pair of segmental/whole-genome duplicated CsARF, and three pairs of tandemly duplicated CsARF. Collinearity analysis revealed that two CsARF genes, CsARF4 and CsARF19, were orthologous in both rice and soybean. Furthermore, subcellular localization analysis showed that CsARF2 was localized in the nucleus. Tissue-specific expression analysis revealed that six genes were highly expressed in cannabis male flowers, and among these genes, 3 genes were further found to be highly expressed at different developmental stages of male flowers. Meanwhile, correlation analysis between the expression level of CsARF genes and CBD content in two cultivars 'H8' and 'Y7' showed that the expression level of CsARF13 was negatively correlated with CBD content, while the expression levels of six genes were positively correlated with CBD content. In addition, most of CsARF genes were responsive to IAA treatment.

Conclusion

Our study laid a foundation for the further studies of CsARFs function in cannabis, and provides candidate genes for breeding varieties with high CBD yield in cannabis production.

Key Transdermal Patch Using Cannabidiol-Loaded Nanocarriers with Better Pharmacokinetics in vivo

Purpose

Cannabidiol (CBD) is a promising therapeutic drug with low addictive potential and a favorable safety profile. However, CBD did face certain challenges, including poor solubility in water and low oral bioavailability. To harness the potential of CBD by combining it with a transdermal drug delivery system (TDDS). This innovative approach sought to develop a transdermal patch dosage form with micellar vesicular nanocarriers to enhance the bioavailability of CBD, leading to improved therapeutic outcomes.

Methods

A skin-penetrating micellar vesicular nanocarriers, prepared using nano emulsion method, cannabidiol loaded transdermal nanocarriers-12 (CTD-12) was presented with a small particle size, high encapsulation efficiency, and a drug-loaded ratio for CBD. The skin permeation ability used Strat-M™ membrane with a transdermal diffusion system to evaluate the CTD and patch of CTD-12 (PCTD-12) within 24 hrs. PCTD-12 was used in a preliminary pharmacokinetic study in rats to demonstrate the potential of the developed transdermal nanocarrier drug patch for future applications.

Results

In the transdermal application of CTD-12, the relative bioavailability of the formulation was 3.68 ± 0.17-fold greater than in the free CBD application. Moreover, PCTD-12 indicated 2.46 ± 0.18-fold higher relative bioavailability comparing with free CBD patch in the ex vivo evaluation. Most importantly, in the pharmacokinetics of PCTD-12, the relative bioavailability of PCTD-12 was 9.47 ± 0.88-fold higher than in the oral application.

Conclusion

CTD-12, a transdermal nanocarrier, represents a promising approach for CBD delivery, suggesting its potential as an effective transdermal dosage form.

Comparative Study of Gas and Liquid Chromatography Methods for the Determination of Underivatised Neutral and Acidic Cannabinoids and Cholesterol

The aim of our study was to develop a gas chromatographic method coupled with mass spectrometry (GC-MS) for the determination of underivatised neutral (CBDs-N) and acidic (CBDs-A) cannabinoids (CBDs) and cholesterol (Chol). Emphasis was also placed on comparing our original GC-MS method with the currently developed C18-high-performance liquid chromatography with photodiode detection (C18-HPLC-DAD). A combination of a long GC column, shallow temperature column programme, and mass-spectrometry was employed to avoid issues arising from the overlap between CBDs and Chol and background fluctuations. The pre-column procedure for CBDs and Chol in egg yolks consisted of hexane extractions, whereas the pre-column procedure for CBDs in non-animal samples involved methanol and hexane extractions. CBDs-A underwent decarboxylation to CBDs during GC-MS analyses, and pre-column extraction of the processed sample with NaOH solution allowed for CBD-A removal. No losses of CBDs-N were observed in the samples extracted with NaOH solution. GC-MS analyses of the samples before and after extraction with NaOH solution enabled the quantification of CBDs-A and CBDs-N. CBDs-A did not undergo decarboxylation to CBDs-N during C18-HPLC-DAD runs. The use of the C18-HPLC-DAD method allowed simultaneous determination of CBDs-N and CBDs-A. In comparison to the C18-HPLC-DAD method, our GC-MS technique offered improved sensitivity, precision, specificity, and satisfactory separation of underivatised CBDs and Chol from biological materials of endogenous species, especially in hemp and hen egg yolk. The scientific novelty of the present study is the application of the GC-MS method for quantifying underivatised CBDs-A, CBDs-N, and Chol in the samples of interest.

Hemp Seed Oil Inhibits the Adipogenicity of the Differentiation-Induced Human Mesenchymal Stem Cells through Suppressing the Cannabinoid Type 1 (CB1)

Central and peripheral mechanisms of the endocannabinoid system (ECS) favor energy intake and storage. The ECS, especially cannabidiol (CBD) receptors, controls adipocyte differentiation (hyperplasia) and lipid accumulation (hypertrophy) in adipose tissue. In white adipose tissue, cannabidiol receptor 1 (CB1) stimulation increases lipogenesis and inhibits lipolysis; in brown adipose tissue, it decreases mitochondrial thermogenesis and biogenesis. This study compared the availability of phytocannabinoids [CBD and Δ9-tetrahydrocannabinol (THC)] and polyunsaturated fatty acids [omega 3 (ω3) and omega 6 (ω6)] in different hemp seed oils (HSO). The study also examined the effect of HSO on adipocyte lipid accumulation by suppressing cannabinoid receptors in adipogenesis-stimulated human mesenchymal stem cells (hMSCs). Most importantly, Oil-Red-O' and Nile red tests showed that HSO induced adipogenic hMSC differentiation without differentiation agents. Additionally, HSO-treated cells showed increased peroxisome proliferator-activated receptor gamma (PPARγ) mRNA expression compared to controls (hMSC). HSO reduced PPARγ mRNA expression after differentiation media (DM) treatment. After treatment with HSO, DM-hMSCs had significantly lower CB1 mRNA and protein expressions than normal hMSCs. HSO treatment also decreased transient receptor potential vanilloid 1 (TRPV1), fatty acid amide hydrolase (FAAH), and monoacylglycerol lipase (MGL) mRNAs in hMSC and DM-hMSCs. HSO treatment significantly decreased CB1, CB2, TRPV1, and G-protein-coupled receptor 55 (GPCR55) protein levels in DM-hMSC compared to hMSC in western blot analysis. In this study, HSO initiated adipogenic differentiation in hMSC without DM, but it suppressed CB1 gene and protein expression, potentially decreasing adipocyte lipid accumulation and lipogenic enzymes.

Contribution to the Synthesis, Characterization, Separation and Quantification of New N-Acyl Thiourea Derivatives with Antimicrobial and Antioxidant Potential

The present study aimed to synthesize, characterize, and validate a separation and quantification method of new N-acyl thiourea derivatives (1a-1o), incorporating thiazole or pyridine nucleus in the same molecule and showing antimicrobial potential previously predicted in silico. The compounds have been physiochemically characterized by their melting points, IR, NMR and MS spectra. Among the tested compounds, 1a, 1g, 1h, and 1o were the most active against planktonic Staphylococcus aureus and Pseudomonas aeruginosa, as revealed by the minimal inhibitory concentration values, while 1e exhibited the best anti-biofilm activity against Escherichia coli (showing the lowest value of minimal inhibitory concentration of biofilm development). The total antioxidant activity (TAC) assessed by the DPPH method, evidenced the highest values for the compound 1i, followed by 1a. A routine quality control method for the separation of highly related compounds bearing a chlorine atom on the molecular backbone (1g, 1h, 1i, 1j, 1m, 1n) has been developed and validated by reversed-phase high-performance liquid chromatography (RP-HPLC), the results being satisfactory for all validation parameters recommended by the ICH guidelines (i.e., system suitability, specificity, the limits of detection and quantification, linearity, precision, accuracy and robustness) and recommending it for routine separation of these highly similar compounds.

Determination of phytocannabinoids in cannabis samples by ultrasound-assisted solid-liquid extraction and high-performance liquid chromatography with diode array detector analysis

The characterisation of cannabis plants, especially the determination of specific phytocannabinoids, has gained enormous importance in the last decade, mainly due to the recent changes in cannabis control in several countries or states. This is particularly relevant for the forensic, medical or recreative industry to have a rapid, inexpensive, and reliable methodology to identify and quantify phytocannabinoids. Furthermore, spiking cannabis products with Δ8-tetrahydrocannabinol (THC) is a contemporary trend that demands improving or replacing current methods to include this cannabinoid. The current study presents an ultrasound-assisted solid-liquid extraction followed by high-performance liquid chromatography with diode array detection (HPLC-DAD) methodology to identify and quantify Δ9-THC, Δ8-THC, cannabidiol, cannabinol, Δ9-tetrahydrocannabinolic acid and cannabidiolic acid in cannabis products. The herbal samples were extracted with ethanol:acetonitrile (50:50, v:v) by ultrasonication using only 50 mg of sample. The plant oils were diluted in ethanol. The optimised procedure allowed ≈100% extraction efficiency of the target cannabinoids. The validation assays showed that the method is linear (R2 > 0.997), selective, sensitive, precise and accurate, with suitable limits of detection (0.125-0.250 µg mL-1) and quantification (0.500 µg mL-1). The method was successfully applied to cannabis samples, demonstrating its suitability for routine analyses. This contribution follows the current demand for fast and straightforward analysis services of this plant and its derivatives, using small amounts of sample. The present study compares very favourably against other works, particularly in regards to the extraction efficiency, speed of the overall procedure, method sensitivity, and ability to monitor Δ8-THC spiked samples using a novel solvent mixture.

On-site screening method for bioavailability assessment of the organophosphorus pesticide, methyl parathion, and its primary metabolite in soils by paper strip biosensor

An important public concern worldwide is soil pollution caused by organophosphorus pesticides and their primary metabolites. To protect the public's health, screening these pollutants on-site and determining their soil bioavailability is important, but doing so is still challenging. This work improved the already-existing organophosphorus pesticide hydrolase (mpd) and transcriptional activator (pobR), and it first designed and constructed a novel biosensor (Escherichia coli BL21/pNP-LacZ) that can precisely detect methyl parathion (MP) and its primary metabolite p-nitrophenol with low background value. To create a paper strip biosensor, E. coli BL21/pNP-LacZ was fixed to filter paper using bio-gel alginate and sensitizer polymyxin B. According to the calibrations of the paper strip biosensor for soil extracts and standard curve, the color intensity of the paper strip biosensor collected by the mobile app may be used to compute the concentration of MP and p-nitrophenol. This method's detection limits were 5.41 µg/kg for p-nitrophenol and 9.57 µg/kg for MP. The detection of p-nitrophenol and MP in laboratory and field soil samples confirmed this procedure. Paper strip biosensor on-site allows for the semi-quantitative measurement of p-nitrophenol and MP levels in soils in a simple, inexpensive, and portable method.

Development and Validation of a GC-FID Method for the Quantitation of 20 Different Acidic and Neutral Cannabinoids

For decades, Cannabis sativa had been illegal to sell or consume around the world, including in the United States. However, in light of the recent 2018 Farm Bill and the legalization of hemp across the US, various cannabis preparations have flooded the market, making it essential to be able to quantitate the levels of the different acidic and neutral cannabinoids in C. sativa and to have a complete cannabinoid profile of the different chemovars of the cannabis plant. A GC-FID method was developed and validated for the analysis of 20 acidic and neutral cannabinoids as trimethylsilyl (TMS) derivatives. The analyzed cannabinoids include cannabidivarinic acid (CBDVA), cannabidiolic acid (CBDA), cannabinolic acid (CBNA), cannabielsoic acid (CBEA), cannabicyclolic acid (CBLA), cannabichromenic acid (CBCA), trans-Δ⁹-tetrahydrocannabivarinic acid (Δ⁹-THCVA), trans-Δ⁹-tetrahydrocannabinolic acid A (Δ⁹-THCAA), cannabigerolic acid (CBGA), cannabidiol (CBD), cannabicyclol (CBL), cannabidivarin (CBDV), trans-Δ⁹-tetrahydrocannabivarin (THCV), cannabichromene (CBC), trans-Δ⁸-tetrahydrocannabinol (Δ⁸-THC), trans-Δ⁹-tetrahydrocannabinol (Δ⁹-THC), cannabigerol (CBG), cannabinol (CBN), cannabicitran (CBT), and cannabielsoin (CBE). The method limit of detection (LOD) was as low as 0.1 µg/mL, while the limit of quantitation ranged from 0.25 µg/mL to 0.5 µg/mL. The precision (%RSD) was < 10%, while trueness ranged from 90 - 107%. The developed method is simple, accurate, and sensitive for the quantitation of all 20 acidic and neutral cannabinoids. Finally, the proposed method was successfully applied to the quantitation of the cannabinoids in different cannabis chemovars grown at the University of Mississippi.

Recent Research on Cannabis sativa L.: Phytochemistry, New Matrices, Cultivation Techniques, and Recent Updates on Its Brain-Related Effects (2018-2023)

Cannabis sativa L. is a plant that humankind has been using for millennia. The basis of its widespread utilization is its adaptability to so many different climatic conditions, with easy cultivability in numerous diverse environments. Because of its variegate phytochemistry, C. sativa has been used in many sectors, although the discovery of the presence in the plant of several psychotropic substances (e.g., Δ⁹-tetrahydrocannabinol, THC) caused a drastic reduction of its cultivation and use together with its official ban from pharmacopeias. Fortunately, the discovery of Cannabis varieties with low content of THC as well as the biotechnological development of new clones rich in many phytochemical components endorsed with peculiar and many important bioactivities has demanded the reassessment of these species, the study and use of which are currently experiencing new and important developments. In this review we focus our attention on the phytochemistry, new matrices, suitable agronomic techniques, and new biological activities developed in the five last years.

Isolation and Characterization of an Unknown Process-Related Impurity in Furosemide and Validation of a New HPLC Method

Furosemide is a widely used loop diuretic in the treatment of congestive heart failure and edema. During the preparation of furosemide, a new process-related impurity G in the levels ranging from 0.08% to 0.13% was detected in pilot batches by a new high performance liquid chromatography (HPLC) method. The new impurity was isolated and characterized by comprehensive analysis of FT-IR, Q-TOF/LC-MS, 1D-NMR (¹H, ¹³C, and DEPT), and 2D-NMR (¹H-¹H-COSY, HSQC, and HMBC) spectroscopy data. The possible formation pathway of impurity G was also discussed in detail. Moreover, a novel HPLC method was developed and validated for the determination of impurity G and the other six known impurities registered in the European Pharmacopoeia as per ICH guidelines. The HPLC method was validated with respect to system suitability, linearity, the limit of quantitation, the limit of detection, precision, accuracy, and robustness. The characterization of impurity G and the validation of its quantitative HPLC method were reported for the first time in this paper. Finally, the toxicological properties of impurity G were predicted by the in silico webserver ProTox-II.

Validation of analytical method of cannabinoids: Novel approach using turbo-extraction

The development of simple, efficient, and low-cost analytical methods is essential for the evaluation and monitoring of the main cannabinoids in Cannabis-based products. In this sense, the objectives of this study were to develop and validate an analytical method for obtaining and determining cannabinoids in a pool sample. Two extraction techniques were used, ultrasound and turbo-extraction, and two system-solvents, methanol:chloroform (9:1 v:v) and ethanol. The analytical method used and validated was carried out in High Performance Liquid Chromatography with Diodes Array Detector. The cannabidiol standard was characterized by a nuclear magnetic resonance. The use of the proposed method makes it possible to identify cannabinoids, both in the acid form and in the neutral form, in 7 min of analysis. The results confirmed high precision and accuracy. The detection and quantification limits were 0.19 μg/mL and 5 μg/mL, respectively. The method developed proved to be selective and robust for the evaluation of cannabinoids. It is hoped that the methods developed can be used to obtain and analyze cannabinoids, both for medicinal purposes and for forensic analysis.

Hemp Waste as a Substrate for Hermetia illucens (L.) (Diptera: Stratiomyidae) and Tenebrio molitor L. (Coleoptera: Tenebrionidae) Rearing

The proper treatment of cannabis agricultural wastes can reduce the environmental impact of its cultivation and generate valuable products. This study aimed to test the potential of cannabis agricultural wastes as a substrate for the rearing of black soldier fly larvae (BSFL) and yellow mealworms (MW). In the case of BSFL, replacing the fibre component (straw) in the substrate with the hemp waste can increase the nutritional value of the substrate and led to bigger larvae. The bigger larvae had lower P and Mg, and higher Fe and Ca. Crude protein also varied based on the size of larvae and/or the content of protein in the initial substrate, which was boosted by replacing straw with hemp material. No other cannabinoids than cannabidiolic acid (CBDA), cannabigerolic acid (CBGA), and cannabidiol (CBD) were found in significant amounts in the larvae. In the case of MW, the larvae grew less on the hemp material in comparison to wheat bran. Replacing wheat bran with the hemp material led to smaller larvae with higher Ca, Fe, K, and crude protein content, but lower Mg and P values. No cannabinoids were detected in the MW fed with the hemp material.

Chiral Separation of Cannabichromene, Cannabicyclol, and Their Acidic Analogs on Polysaccharide Chiral Stationary Phases

Until recently, chirality has not been a major focus in the study of cannabinoids, as most cannabinoids of interest, such as cannabidiol and tetrahydrocannabinol, exist as a single isomer from natural sources. However, this is changing as more cannabinoids are identified, and compounds such as cannabichromene and cannabicyclol are emerging as potential investigatory candidates for varying indications. Because these molecules are chiral, the separation and study of the individual enantiomers' biological and physiological effects should therefore be of interest. The purpose of this study was to identify analytical separation conditions and then adapt those conditions to preparative separation. This was accomplished with a column-screening approach on Daicel's immobilized polysaccharide chiral stationary phases using non-traditional mobile phases, which included dichloromethane, ethyl acetate, and methyl tert-butyl ether under high-performance liquid chromatography conditions. CHIRALPAK^® IK was found to separate all four compounds well with mobile phases containing hexane-dichloromethane (with or without an acidic additive). From these methods, the separation productivities were calculated to better visualize the separation scalability, which shows that the kilogram-scale separations of each are feasible.

Phytochemical Comparison of Medicinal Cannabis Extracts and Study of Their CYP-Mediated Interactions with Coumarinic Oral Anticoagulants

Introduction

Treatment with cannabis extracts for a variety of diseases has gained popularity. However, differences in herb-drug interaction potential of extracts from different plant sources are poorly understood. In this study, we provide a characterization of cannabis extracts prepared from four cannabis chemotypes and an in vitro assessment of their Cytochrome P450 (CYP)-mediated herb-drug interaction profiles.

Methods

Plant extracts were either commercially obtained or prepared using ethanol as solvent, followed by overnight decarboxylation in a reflux condenser system. The extracts were characterized for their cannabinoid content using NMR and HPLC-PDA-ELSD-ESIMS. CYP inhibition studies with the cannabis extracts and pure cannabinoids (tetrahydrocannabinol [THC] and cannabidiol [CBD]) were performed using pooled, mixed gender human liver microsomes. Tolbutamide and testosterone were used as specific substrates to assess the inhibitory potential of the extracts on CYP2C9 and CYP3A4, and the coumarinic oral anticoagulants warfarin, phenprocoumon, and acenocoumarol were studied as model compounds since in vivo herb-drug interactions have previously been reported for this compound class.

Results

In accordance with the plant chemotypes, two extracts were rich in THC and CBD (at different proportions); one extract contained mostly CBD and the other mostly cannabigerol (CBG). Residual amounts of the corresponding acids were found in all extracts. The extracts with a single major cannabinoid (CBD or CBG) inhibited CYP2C9- and CYP3A4-mediated metabolism stronger than the extracts containing both major cannabinoids (THC and CBD). The inhibition of CYP3A4 and CYP2C9 by the extract containing mostly CBD was comparable to their inhibition by pure CBD. In contrast, the inhibitory potency of extracts containing both THC and CBD did not correspond to the combined inhibitory potency of pure THC and CBD. Although being structural analogs, the three coumarin derivatives displayed major differences in their herb-drug interaction profiles with the cannabis extracts and the pure cannabinoids.

Conclusion

Despite the fact that cannabinoids are the major components in ethanolic, decarboxylated cannabis extracts, it is difficult to foresee their herb-drug interaction profiles. Our in vitro data and the literature-based evidence on in vivo interactions indicate that cannabis extracts should be used cautiously when co-administered with drugs exhibiting a narrow therapeutic window, such as coumarinic anticoagulants, regardless of the cannabis chemotype used for extract preparation.

HPLC Method Validation for the Estimation of Lignocaine HCl, Ketoprofen and Hydrocortisone: Greenness Analysis Using AGREE Score

In the current study, the reversed-phased high-pressure liquid chromatography (RP-HPLC) method was proposed for the estimation of lignocaine hydrochloride (LIG), hydrocortisone (HYD) and Ketoprofen (KET) according to International Conference for Harmonization (ICH) Q2 R1 guidelines, in a gel formulation. The chromatographic evaluation was executed using Shimadzu RP-HPLC, equipped with a C8 column and detected using UV at 254 nm wavelength, using acetonitrile and buffer (50:50) as a mobile phase and diluent, at flow rate 1 mL/min and n injection volume of 20 μL. The retention time for LIG, HYD, and KET were 1.54, 2.57, and 5.78 min, correspondingly. The resultant values of analytical recovery demonstrate accuracy and precision of the method and was found specific in identification of the drugs from dosage form and marketed products. The limit of detection (LOD) for LIG, HYD, and KET were calculated to be 0.563, 0.611, and 0.669 ppm, while the limit of quantification (LOQ) was estimated almost at 1.690, 1.833, and 0.223 ppm, respectively. The AGREE software was utilized to evaluate the greenness score of the proposed method, and it was found greener in score (0.76). This study concluded that the proposed method was simple, accurate, precise, robust, economical, reproducible, and suitable for the estimation of drugs in transdermal gels.

A reliable quantitative method for determining CBD content and release from transdermal patches in Franz cells

INTRODUCTION

There are several cannabidiol (CBD) transdermal patches available on the market. However, none are FDA-approved. Furthermore, not much evidence has been published about CBD release and skin permeation from such patches, so the effectiveness and reliability remain unclear.

OBJECTIVES

We aimed to develop a method to determine the in vitro release and skin permeation of CBD from transdermal patches using Franz cell diffusion in combination with quantitative ¹ H-NMR (qNMR).

MATERIALS AND METHODS

The study was conducted on CBD patches with known CBD content and six different commercially available or market-ready CBD patches using a Franz cell with a Strat-M™ membrane and with samples taken directly from the transdermal patch for qNMR analysis.

RESULTS

The use of qNMR yielded an average recovery of 100% ± 7% when samples with known CBD content were tested. Results from the testing of six commercially available patches indicated that five out of six patches did not contain the CBD amount stated by the manufacturer according to a ± 10% variance margin, of which four patches were under-labeled and one was over-labeled. The release rate of patches was determined, and significant differences between the patches were shown. Maximum release of CBD was calculated to occur after 39 to 70 h.

CONCLUSION

The established method was proven to be a reliable means of determining the quantity and release of CBD from transdermal patches and can be used to verify CBD content and release rate in transdermal patches.

Application of experimental design in HPLC method optimisation for the simultaneous determination of multiple bioactive cannabinoids

The scientific interest in Cannabis sativa L. analysis has been rapidly increasing in recent years, especially for what concerns cannabinoids, plant secondary metabolites which are well known for having many biological properties. High-performance liquid chromatography (HPLC) is frequently used for both the qualitative and quantitative analysis of cannabinoids in plant extracts from C. sativa and its derived products. Many studies have been focused on the main cannabinoids, such as ∆⁹-tetrahydrocannabinolic acid (∆⁹-THCA), cannabidiolic acid (CBDA), cannabigerolic acid (CBGA) and their decarboxylated derivatives, such as ∆⁹-tetrahydrocannabinol (∆⁹-THC), cannabidiol (CBD) and cannabigerol (CBG). In addition to the abovementioned compounds, the plant produces other metabolites of the same chemical class, and some of them have shown interesting biological activities. In the light of this, it is important to have efficient analytical methods for the simultaneous separation of cannabinoids, which is quite complex since they present similar chemical-physical characteristics. The present work is focused on the use of the Design of Experiments technique (DoE) to develop and optimise an HPLC method for the simultaneous separation of 14 cannabinoids. Experimental design optimisation was applied by using a Central Composite Face-Centered design to achieve the best resolution with minimum experimental trials. Five significant variables affecting the chromatographic separation, including ammonium formate concentration, gradient elution, run time and flow rate, were studied. A multivariate strategy, based on Principal Component Analysis (PCA) and Partial Least Squared (PLS) regression, was used to define the best operative conditions. The developed method allowed for the separation of 12 out of 14 cannabinoids. Due to co-elution phenomena, HPLC coupled with a triple quadrupole mass analyser (HPLC-ESI-MS/MS) was applied, monitoring the specific transitions of each compound in the multiple reaction monitoring (MRM) mode. Finally, the optimised method was applied to C. sativa extracts having a different cannabinoid profile to demonstrate its efficiency to real samples. The methodology applied in this study can be useful for the separation of other cannabinoid mixtures, by means of appropriate optimisation of the experimental conditions.

Genetic Variants Associated with Long-Terminal Repeats Can Diagnostically Classify Cannabis Varieties

Cannabis sativa (Cannabis) has recently been legalized in multiple countries globally for either its recreational or medicinal use. This, in turn, has led to a marked increase in the number of Cannabis varieties available for use in either market. However, little information currently exists on the genetic distinction between adopted varieties. Such fundamental knowledge is of considerable value and underpins the accelerated development of both a nascent pharmaceutical industry and the commercial recreational market. Therefore, in this study, we sought to assess genetic diversity across 10 Cannabis varieties by undertaking a reduced representation shotgun sequencing approach on 83 individual plants to identify variations which could be used to resolve the genetic structure of the assessed population. Such an approach also allowed for the identification of the genetic features putatively associated with the production of secondary metabolites in Cannabis. Initial analysis identified 3608 variants across the assessed population with phylogenetic analysis of this data subsequently enabling the confident grouping of each variety into distinct subpopulations. Within our dataset, the most diagnostically informative single nucleotide polymorphisms (SNPs) were determined to be associated with the long-terminal repeat (LTRs) class of retroelements, with 172 such SNPs used to fully resolve the genetic structure of the assessed population. These 172 SNPs could be used to design a targeted resequencing panel, which we propose could be used to rapidly screen different Cannabis plants to determine genetic relationships, as well as to provide a more robust, scientific classification of Cannabis varieties as the field moves into the pharmaceutical sphere.

Green extraction of hemp (Cannabis sativa L.) using microwave method for recovery of three valuable fractions (essential oil, phenolic compounds and cannabinoids): a central composite design optimization study

BACKGROUND

Solvent-free microwave-assisted extraction (MAE) is a green extraction method capable of boosting the yield and quality profile of hemp essential oil when compared with other conventional extraction techniques. During this process, two by-products are produced, namely the aqueous residue containing bioactive phenolics and the residual deterpenated biomass, which can be used for further extraction and purification of phytocannabinoids. To date, the hemp industry has not utilized these products, although they can be valuable for the food, cosmetic, nutraceutical and pharmaceutical market.

RESULTS

This study assessed and optimized the variables affecting MAE efficiency, namely microwave irradiation power, extraction time and added water, which were studied using a central composite design approach, and results were used to optimize the extraction process for recovering three valuable fractions: essential oil, polyphenols and phytocannabinoids. The products obtained using the optimized conditions were characterized in terms of yield, chemical profile and antioxidant potential. Moreover, the by-products obtained during the optimized run were further analyzed in terms of their biological activity using both enzymatic and non-enzymatic assays. The aqueous residue demonstrated a powerful α-glucosidase inhibition, a good activity in terms of superoxide radical scavenging activity, a modest efficacy in terms of inhibition of advanced glycation end products formation and no activity in terms of lipase inhibition. The residual deterpenated biomass did not possess significant biological activity.

CONCLUSION

This work demonstrated valorization of industrial hemp essential oil and its by-products, obtained by a sustainable and eco-friendly extraction method, through an almost waste-free approach. Cannabinoids as well as other valuable bioactive compounds such as glycosidic flavones may be recovered from the residues of the essential oil extraction, representing interesting substances in the pharmaceutical, cosmetic and nutraceutical fields. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Hemp in Animal Diets—Cannabidiol

In recent years, interest in hemp use has grown owing to its chemical and medicinal properties. Several parts of this plant, such as seeds, leaves, flowers, and stems are used in medicine, industry, and environmental preservation. Although there were legal restrictions on hemp exploitation in some countries due to the trace presence of THC as a psychoactive element, many countries have legalized it in recent years. Cannabidiol or CBD is a non-psychoactive phytocannabinoid that can activate the endocannabinoid system and its receptors in the central and peripheral nervous system in bodies of different species. Cannabidiol has anti-inflammatory, antioxidative, analgesic, and anti-depressant effects. This review investigates various aspects of cannabidiol use and its potential in animals and humans.

Portable biosensors for rapid on-site determination of cannabinoids in cannabis, a review

Recent studies highlight the therapeutic virtues of cannabidiol (CBD). Furthermore, due to their molecular enriched profiles, cannabis inflorescences are biologically superior to a single cannabinoid for the treatment of various health conditions. Thus, there is flourishing demand for Cannabis sativa varieties containing high levels of CBD. Additionally, legal regulations around the world restrict the cultivation and consumption of tetrahydrocannabinol (THC)-rich cannabis plants for their psychotropic effects. Therefore, the use of cannabis varieties that are high in CBD is permitted as long as their THC content does not exceed a low threshold of 0.3%-0.5%, depending on the jurisdiction. These chemovars are legally termed 'hemp'. This controlled cannabinoid requirement highlights the need to detect low levels of THC, already in the field. In this review, cannabis profiling and the existing methods used for the detection of cannabinoids are firstly evaluated. Then, selected valuable biosensor technologies are discussed, which suggest portable, rapid, sensitive, reproducible, and reliable methods for on-site identification of cannabinoids levels, mainly THC. Recent cutting-edge techniques of promising potential usage for both cannabis and hemp analysis are identified, as part of the future cultivation and agricultural improvement of this crop.

Analytical method validation for assay determination of cannabidiol and tetrahydrocannabinol in hemp oil infused products by RP-HPLC

A simple quantitative reverse phase high performance liquid chromatographic (RP-HPLC) method has been developed and validated for assay determination of cannabidiol and tetrahydrocannabinol in hemp oil infused products. The RP-HPLC method was developed and optimized for the mobile phase composition, flow rate, column selection and detector wavelength. An isocratic elution of samples were performed on SOLAS 100 Å C18 150 mm × 4.6 mm, 5 μm column with a mobile phase containing 75/25 acetonitrile/water v/v, with a flow rate of 1.5 mL/min by using an ultraviolet–visible (UV/Vis) detector operating at 214 nm. The RP-HPLC method was validated to meet regulatory requirements which covers specificity, accuracy, range, linearity, precision, system suitability and robustness. The validated assay test method was applied successfully to quantify cannabidiol and tetrahydrocannabinol in commercial hemp oil infused products such as tablets, soft gel capsules, plant extract oils, oral drops, tincture, and beverage enhancers. All the test results were found acceptable as per ICH guidelines, and this confirmed the feasibility of this method for its intended use in regular quality control and assay of cannabidiol and tetrahydrocannabinol in hemp oil infused products.

Development and Evaluation of Cannabidiol Orodispersible Tablets Using a 23-Factorial Design

Orodispersible tablets (ODTs) are pharmaceutical formulations used to obtain fast therapeutic effects, usually recommended for geriatric and pediatric patients due to their improved compliance, bioavailability, ease of administration, and good palatability. This study aimed to develop ODTs with cannabidiol (CBD) phytocannabinoid extracted from Cannabis sativa used in the treatment of Lennox–Gastaut and Dravet syndromes. The tablets were obtained using an eccentric tableting machine and 9 mm punches. To develop CBD ODTs, the following parameters were varied: the Poloxamer 407 concentration (0 and 10%), the type of co-processed excipient (Prosolv^® ODT G2—PODTG2 and Prosolv^® EasyTab sp—PETsp), and the type of superdisintegrant (Croscarmellose—CCS, and Soy Polysaccharides—Emcosoy^®—EMCS), resulting in eleven formulations (O1–O11). The following dependent parameters were evaluated: friability, disintegration time, crushing strength, and the CBD dissolution at 1, 3, 5, 10, 15, and 30 min. The dependent parameters were verified according to European Pharmacopoeia (Ph. Eur.) requirements. All the tablets obtained were in accordance with quality requirements in terms of friability (less than 1%), and disintegration time (less than 180 s). The crushing strength was between 19 N and 80 N. Regarding the dissolution test, only four formulations exhibited an amount of CBD released higher than 80% at 30 min. Taking into consideration the results obtained and using the Modde 13.1 software, an optimal formulation was developed (O12), which respected the quality criteria chosen (friability 0.23%, crushing strength of 37 N, a disintegration time of 27 s, and the target amount of CBD released in 30 min of 99.3 ± 6%).

Differentiation of industrial hemp strains by their cannabinoid and phenolic compounds using LC × LC-HRMS

Cannabis is an ancient plant that has been used for therapeutic and recreational purposes. Nowadays, industrial hemp, a variety with low concentration of the psychoactive cannabinoid Δ⁹-tetrahydrocannabinol (THC) and high concentration of non-psychoactive cannabinoids, is getting more and more interest in the food, pharmaceutical, and cosmetic industry. However, cannabis not only contains cannabinoids as bioactive components but also other metabolites like terpenes and phenolic compounds, and the content of these interesting secondary metabolites greatly differs with the genetic variety of the plant. Due to the huge complexity of composition of the cannabis matrix, in this work, a comprehensive two-dimensional liquid chromatography (LC × LC) method has been developed as a very power separation technique coupling a pentafluorophenyl (PFP) and a C18 in the first and second dimensions. Two industrial hemp strains (cookie and gelato) were analyzed to determine the difference in their content of cannabinoids and phenolic compounds. To do this, a new demodulation process was applied for the first time to transform 2D raw data into 1D data which allowed carrying out the chemometric analysis needed to determine the statistical differences between the hemp strains. The cookie strain presented a total of 41 cannabinoid markers, while the gelato strain presented more representative phenolic compounds, in total 24 phenolic compounds were detected as potential markers of this sample. These differences in the chemical composition could determine the industrial destiny of the different hemp strains.

Rapid analytical method development and validation for the simultaneous estimation of 5-Fluorouracil and Cannabidiol in plasma and lipid-based nanoformulations

Background:

5-Fluorouracil (5-FU) is a well-established anticancer drug. Several studies have also demonstrated the anticancer potential of Cannabidiol (CBD) against various malignancies, including skin cancer. Reported synergistic effects of this combination fascinate researchers to consider this for the management of skin cancer.

Methods:

A simple and robust HPLC method for simultaneous estimation of 5-FU and CBD at its single wavelength (237 nm) was developed and validated. The separation of these compounds was performed on Waters® HPLC system with Hypersil™ C18 RP-column using methanol and water in gradient flow as mobile phase. The method could effectively quantify the nanogram levels of both analytes simultaneously in plasma spiked samples and various nanoformulations. The analytical performance of the proposed method was validated in terms of various parameters, such as linearity, ruggedness, specificity, and few others.

Results:

5-FU as well as CBD were successfully detected at 237 nm with retention time 1.4 and 1.84 minutes respectively. Calibration curves were found to be linear with R2 values of 0.985 and 0.984 for 5-FU and CBD respectively. The method was linear, precise, specific and robust. Additionally, prepared method successfully employed in determining concentration of both drugs in combitorial nanoformulations.

Conclusion:

The findings show that the developed method was simple, reliable, sensitive and economical. It could be employed for the simultaneous estimation of 5-FU and CBD in various in vitro and in vivo studies.

Evaluation of Hemp Seed Oils Stability under Accelerated Storage Test

The interest in hemp seed oil has recently increased, due to the latest regulations which allow its use as food. Hemp seed oil is characterized by a high content of polyunsaturated fatty acids, which are highly prone to oxidation. Accelerated thermal oxidation (60 °C, 18 days) has been applied to nine types of cold-pressed hemp seed oils to monitor the evolution of the samples during oxidative deterioration. The results showed that the only determinations of primary (peroxide value) and secondary (TBARs) oxidation products did not allow a sufficient or correct evaluation of the oxidative changes of hemp seed oils during storage. In fact, samples at the end of the test were primarily characterized by a high presence of oxidation volatile compounds and a significant decrease of antioxidants. Several volatiles identified before the accelerated storage, such as the predominant α-pinene and β-pinene, gradually decreased during the accelerated storage period. On the other hand, aldehydes (hexanal, (E)-2-hexenal, heptanal, (E,E)-2,4-hexadienal, (E)-2-heptenal, (E,E)-2,4-heptadienal, (E,Z)-2,4-heptadienal, 2-octenal, nonanal, nonenal, 2,4-nonadienal, (E,E)- 2,4-decadienal and 2,4-decadienal), ketones (1-octen-3-one, 3-octen-2-one, (E,E)-3,5-octadien-2- one and 3,5-octadien-2-one), acids (propionic acid, pentanoic acid, hexanoic acid and heptanoic acid) and 2-pentyl-furan increased during the accelerated storage, as principal markers of oxidation.

Analytical Techniques for Phytocannabinoid Profiling of Cannabis and Cannabis-Based Products-A Comprehensive Review

Cannabis is gaining increasing attention due to the high pharmacological potential and updated legislation authorizing multiple uses. The development of time- and cost-efficient analytical methods is of crucial importance for phytocannabinoid profiling. This review aims to capture the versatility of analytical methods for phytocannabinoid profiling of cannabis and cannabis-based products in the past four decades (1980-2021). The thorough overview of more than 220 scientific papers reporting different analytical techniques for phytocannabinoid profiling points out their respective advantages and drawbacks in terms of their complexity, duration, selectivity, sensitivity and robustness for their specific application, along with the most widely used sample preparation strategies. In particular, chromatographic and spectroscopic methods, are presented and discussed. Acquired knowledge of phytocannabinoid profile became extremely relevant and further enhanced chemotaxonomic classification, cultivation set-ups examination, association of medical and adverse health effects with potency and/or interplay of certain phytocannabinoids and other active constituents, quality control (QC), and stability studies, as well as development and harmonization of global quality standards. Further improvement in phytocannabinoid profiling should be focused on untargeted analysis using orthogonal analytical methods, which, joined with cheminformatics approaches for compound identification and MSLs, would lead to the identification of a multitude of new phytocannabinoids.

THC and CBD Fingerprinting of an Elite Cannabis Collection from Iran: Quantifying Diversity to Underpin Future Cannabis Breeding

Cannabis (Cannabis sativa L.) has a rich history of human use, and the therapeutic importance of compounds produced by this species is recognized by the medical community. The active constituents of cannabis, collectively called cannabinoids, encompass hundreds of distinct molecules, the most well-characterized of which are tetrahydrocannabinol (THC) and cannabidiol (CBD), which have been used for centuries as recreational drugs and medicinal agents. As a first step to establish a cannabis breeding program, we initiated this study to describe the HPLC-measured quantity of THC and CBD biochemistry profiles of 161 feral pistillate cannabis plants from 20 geographical regions of Iran. Our data showed that Iran can be considered a new region of high potential for distribution of cannabis landraces with diverse THC and CBD content, predominantly falling into three groups, as Type I = THC-predominant, Type II = approximately equal proportions of THC and CBD (both CBD and THC in a ratio close to the unity), and Type III = CBD-predominant. Correlation analysis among two target cannabinoids and environmental and geographical variables indicated that both THC and CBD contents were strongly influenced by several environmental-geographical factors, such that THC and CBD contents were positively correlated with mean, min and max annual temperature and negatively correlated with latitude, elevation, and humidity. Additionally, a negative correlation was observed between THC and CBD concentrations, suggesting that further studies to unravel these genotype × environment interactions (G × E interactions) are warranted. The results of this study provide important pre-breeding information on a collection of cannabis that will underpin future breeding programs.

Anti-depressant effects of ethanol extract from Cannabis sativa (hemp) seed in chlorpromazine-induced Drosophila melanogaster depression model

CONTEXT

Depression is a severe mental illness caused by a deficiency of dopamine and serotonin. Cannabis sativa L. (Cannabaceae) has long been used to treat pain, nausea, and depression.

OBJECTIVE

This study investigates the anti-depressant effects of C. sativa (hemp) seed ethanol extract (HE) in chlorpromazine (CPZ)-induced Drosophila melanogaster depression model.

MATERIALS AND METHODS

The normal group was untreated, and the control group was treated with CPZ (0.1% of media) for 7 days. The experimental groups were treated with a single HE treatment (0.5, 1.0, and 1.5% of media) and a mixture of 0.1% CPZ and HE for 7 days. The locomotor activity, behavioural patterns, depression-related gene expression, and neurotransmitters level of flies were investigated.

RESULTS

The behavioural patterns of individual flies were significantly reduced with 0.1% CPZ treatment. In contrast, combination treatment of 1.5% HE and 0.1% CPZ significantly increased subjective daytime activity (p < 0.001) and behavioural factors (p < 0.001). These results correlate with increased transcript levels of dopamine (p < 0.001) and serotonin (p < 0.05) receptors and concentration of dopamine (p < 0.05), levodopa (p < 0.001), 5-HTP (p < 0.05), and serotonin (p < 0.001) compared to those in the control group.

DISCUSSION AND CONCLUSIONS

Collectively, HE administration alleviates depression-like symptoms by modulating the circadian rhythm-related behaviours, transcript levels of neurotransmitter receptors, and neurotransmitter levels in the CPZ-induced Drosophila model. However, additional research is needed to investigate the role of HE administration in behavioural patterns, reduction of the neurotransmitter, and signalling pathways of depression in a vertebrate model system.

Contents of Cannabinoids in Hemp Varieties Grown in Maryland

Coincident with the cannabis legalization and the increased interest in the medicinal use of the plant, the cannabis marketplace and farming have seen tremendous growth. It is reported that there are more than 2000 cannabis varieties available to customers. However, the data that is available to the growers and breeders regarding the cannabinoid contents of various varieties remains low. Here, a high-performance liquid chromatography (HPLC) method was developed and validated for the simultaneous separation and determination of 11 cannabinoids. A total of 104 hemp bud materials belonging to 20 varieties were collected from farms in the state of Maryland and analyzed with the HPLC method. The contents of the 11 cannabinoids in various varieties were compared and discussed, highlighting the varieties that showed a high yield of cannabinoids and good consistency that are more appropriate for cannabinoid production.

Cannabinoids-Characteristics and Potential for Use in Food Production

Scientific demonstrations of the beneficial effects of non-psychoactive cannabinoids on the human body have increased the interest in foods containing hemp components. This review systematizes the latest discoveries relating to the characteristics of cannabinoids from Cannabis sativa L. var. sativa, it also presents a characterization of the mentioned plant. In this review, we present data on the opportunities and limitations of cannabinoids in food production. This article systematizes the data on the legal aspects, mainly the limits of Δ9-THC in food, the most popular analytical techniques (LC-MS and GC-MS) applied to assay cannabinoids in finished products, and the available data on the stability of cannabinoids during heating, storage, and access to light and oxygen. This may constitute a major challenge to their common use in food processing, as well as the potential formation of undesirable degradation products. Hemp-containing foods have great potential to become commercially popular among functional foods, provided that our understanding of cannabinoid stability in different food matrices and cannabinoid interactions with particular food ingredients are expanded. There remains a need for more data on the effects of technological processes and storage on cannabinoid degradation.

Very Fast RP–UHPLC–PDA Method for Identification and Quantification of the Cannabinoids from Hemp Oil

In recent years, hemp oils have become ubiquitous in health products on the European market. As the trend continues to grow and more cannabinoids are researched for their therapeutic benefits, more academic and industrial interests are drawn to this direction. Cannabidiol, Δ9-tetrahydrocannabinol, and their acidic forms remain the most examined cannabinoids in hemp and cannabis oils, in the case of cannabidiol due to its proven health implications in numerous articles, and in the case of Δ9-tetrahydrocannabinol, due to the legislation in the European area. These oils sold on the internet contain a wide range of cannabinoids that could demonstrate their effects and benefits. As a result of these claims, we developed a robust and rapid method that can identify and quantify 10 of the most common cannabinoids found in hemp oils: cannabivarin, cannabidiolic acid, cannabigerolic acid, cannabigerol, cannabidiol, cannabinol, Δ9-tetrahydrocannabinol, Δ8-tetrahydrocannabinol, cannabichromene, and tetrahydrocannabinolic acid in less than 11 min, with reverse-phase–high-performance liquid chromatography–photodiode matrix system (RP–UHPLC–PDA) equipped with C18 column, eluting in a gradient using water and acetonitrile with formic acid as mobile phases. The quantification of 9 sample products presented in different matrixes was performed using a calibration curve obtained by analyzing standard solutions from a 10-cannabinoid-mix-certified reference standard. The developed method demonstrated the ability to identify and quantify the main cannabinoids in hemp oil and is a useful tool for pharmaceutical professionals.

An Ultrafast Ultrahigh-Performance Liquid Chromatography Coupled With Tandem Mass Spectrometry Method for Cannabidiol Monitoring in Pediatric Refractory Epilepsy

BACKGROUND

Cannabidiol (CBD) is a nonpsychoactive natural product that has been increasingly used as a promising new drug for the management of neurological conditions such as refractory epilepsy. Development of rapid and sensitive methods to quantitate CBD is essential to evaluate its pharmacokinetics in humans, particularly in children. The objective of this work was to develop and validate an ultrafast ultrahigh-performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS) method for CBD quantitation that is capable of detecting major CBD and tetrahydrocannabinol (THC) metabolites in the plasma of pediatric refractory epilepsy patients.

METHODS

Eight-point CBD calibration curves were prepared using 60 µL of plasma from healthy volunteers. Samples were analyzed in a Shimadzu Nexera X2 UHPLC system, which was coupled to a Sciex QTRAP 6500 mass spectrometer. Chromatography was optimized in acetonitrile (ACN)/water with a 70%-90% gradient of ACN in 2 minutes. Multiple reaction monitoring transitions of major CBD and THC metabolites were optimized in patient plasma.

RESULTS

The optimized UHPLC-MS/MS method was validated for the linear range (1-300 ng/mL) of CBD (r2 = 0.996). The limit of quantification and limit of detection were 0.26 and 0.86 ng/mL, respectively. Accuracy and precision met the acceptable validation limits. CBD recovery and matrix effects were 83.9 ± 13.9% and 117.4 ± 4.5%, respectively. The method was successfully applied to quantify CBD and detect the major CBD and THC metabolites in clinical samples. 7-COOH-CBD was the most intensely detected metabolite followed by glucuronide conjugates.

CONCLUSIONS

A simple and sensitive method for rapidly monitoring CBD and identifying relevant metabolites was developed. Its applicability in samples from children treated for epilepsy was demonstrated, making it an excellent alternative for performing pharmacokinetic studies.

Phytocannabinoids - An Overview of the Analytical Methodologies for Detection and Quantification of Therapeutically and Recreationally Relevant Cannabis Compounds

The legalization of the cultivation of low Δ9-tetrahydrocannabinol (Δ9-THC) and high cannabidiol (CBD) Cannabis Sativa plants is gaining momentum around the world due to increasing demand for CBD-containing products. In many countries where CBD oils, extracts and CBD-infused foods and beverages are being sold in health shops and supermarkets, appropriate testing of these products is a legal requirement. Normally this involves determining the total Δ9-THC and CBD and their precursor tetrahydrocannabinolic acids (THCA) and cannabidiolic acid (CBDA). As our knowledge of the other relevant cannabinoids expands, it is likely so too will the demand for them as additives in many consumer products ensuring a necessity for quantification methods and protocols for their identification. This paper discusses therapeutically relevant cannabinoids found in Cannabis plant, the applicability and efficiency of existing extraction and analytical techniques as well as the legal requirements for these analyses.

Potency testing of cannabinoids by liquid and supercritical fluid chromatography: Where we are, what we need

Hemp and cannabis industry is undergoing a renewed interest due to legalization of marijuana (a topic that all countries are discussing, especially in recent years) and the growing importance of therapeutic properties of cannabinoids. Together with an increment in the production of hemp and recreational cannabis, there has been an increasing demand for accurate potency testing of products (i.e. quantification of main cannabinoids present in the plant in terms of weight percentage) prior commercialization. This translates in an urgent need of reliable analytical methods to characterize cannabis and hemp samples. Cannabis and hemp preparations are commercialized under various forms (e.g., flowers, oils, candies or even baked goods) usually containing a large number of often very similar compounds making their separation very challenging. Strictly connected to this, another emerging topic concerns the need for the developing of large scale separation techniques for the purification of cannabinoids from complex matrices and for the preparation of analytical-grade standards (including the chiral ones). This paper reviews the most recent achievements in both these aspects. Cutting-edge applications and novel opportunities in potency testing by high performance liquid chromatography (HPLC) with UV detection (which is becoming the golden standard, according to several pharmacopeias, for this kind of measurements) are discussed. The focus has been given to the very important topic of enantio-discrimination of chiral cannabinoids, for which supercritical fluid chromatography (SFC) appears to be particularly suitable. The last part of the work covers the purification of cannabinoids through preparative chromatography. In this regard, particular attention has been given to the most innovative multi-column techniques allowing for the continuous purification of target molecules. The most recent advancements and future challenges in this field are discussed.

Discrimination of CBD-, THC- and CBC-type acid cannabinoids through diagnostic ions by UHPLC-HR-MS/MS in negative ion mode

The interest in industrial hemp-based products and by-products to be utilized in food and nutraceutical sector is strictly linked to the demand for improved analytical methods to rapidly discriminate acid phytocannabinoid isomers. Indeed, the differentiation of acid phytocannabinoids, also named pre-cannabinoids, is not properly exploited and valued until now, and it is challenging. Herein, using high-resolution MS/MS, the most common pre-cannabinoids with the resorcinol core linked to the alkyl five carbons chain were deeply investigated in terms of their reactivity to collision-induced dissociation, gaining key data on the integrated energy framework of their dissociation pathway. In fact, CBD-, THC- and CBC-type pre-cannabinoids could be discriminated based on the base peak identity, and the intensity of common fragment ions, when collision energy fragmented precursor ions by 70-75 %. In particular, energy-resolved CID mass spectra highlighted that fragmentation occurs, unrelatedly to alkyl chain length, at phenolic and monoterpenic moieties levels. Accordingly, this tool is effective for further differentiating pre-cannabinoid homologues, from methyl- up to heptyl-homologues, getting new insight in acid cannabinoids heritage of hemp and its products.

A Rapid Nano-Liquid Chromatographic Method for the Analysis of Cannabinoids in Cannabis sativa L. Extracts

Cannabis sativa L. is an herbaceous plant belonging to the family of Cannabaceae. It is classified into three different chemotypes based on the different cannabinoids profile. In particular, fiber-type cannabis (hemp) is rich in cannabidiol (CBD) content. In the present work, a rapid nano liquid chromatographic method (nano-LC) was proposed for the determination of the main cannabinoids in Cannabis sativa L. (hemp) inflorescences belonging to different varieties. The nano-LC experiments were carried out in a 100 µm internal diameter capillary column packed with a C18 stationary phase for 15 cm with a mobile phase composed of ACN/H₂O/formic acid, 80/19/1% (v/v/v). The reverse-phase nano-LC method allowed the complete separation of four standard cannabinoids in less than 12 min under isocratic elution mode. The nano-LC method coupled to ultraviolet (UV) detection was validated and applied to the quantification of the target analytes in cannabis extracts. The nano-LC system was also coupled to an electrospray ionization–mass spectrometry (ESI-MS) detector to confirm the identity of the cannabinoids present in hemp samples. For the extraction of the cannabinoids, three different approaches, including dynamic maceration (DM), ultrasound-assisted extraction (UAE), and an extraction procedure adapted from the French Pharmacopeia’s protocol on medicinal plants, were carried out, and the results achieved were compared.

Delta9-THC determination by the EU official method: evaluation of measurement uncertainty and compliance assessment of hemp samples

Hemp cultivation is living a period of renewed interest worldwide after long years of opposition and abandonment. The European Union (EU) allows and subsidizes the growing of fiber and oilseed cultivars of Cannabis sativa L. with respect to the THC content limit of 0.2%. The EU method for the quantitative determination of Δ9-tetrahydrocannabinol (THC) content in hemp varieties provides to apply a tolerance of 0.03 g of THC per 100 g of sample concerning compliance assessment to that limit. However, the method does not report any precision data, especially useful as a function of THC content to evaluate measurement uncertainty and therefore to establish the conformity of hemp at different THC legal limits. Measurement uncertainty of the method by both bottom-up and top-down approach, besides repeatability and reproducibility, was investigated and estimated in the THC concentration range 0.2-1.0%, which includes the different legal limits set out for hemp around the world. We proposed Decision Rules for conformity of hemp showing that a non-compliant declaration beyond reasonable doubt should be stated when the THC content, as a mean result on a duplicate analysis, exceeds the limit by at least 11-15%, depending on THC limit. We highlighted other issues concerning practical aspects of hemp analysis, from sampling to evaluation of results, as well as the need to carry out collaborative studies on the EU method.

Single-Run Separation and Quantification of 14 Cannabinoids Using Capillary Electrophoresis

Quantification of major cannabinoids in cannabis products is normally performed using high-pressure liquid chromatography (HPLC)-based methods. We propose a cost-effective alternative method that successfully separates and quantifies 14 cannabinoids in a single run using capillary electrophoresis (CE) coupled with a UV detector in 18 min. The separation is carried out in 60% acetonitrile in the presence of 6.5 mM sodium hydroxide and 25 µM β-cyclodextrin, resulting in good separation of cannabinoids. Our CE method demonstrated the limit of detection between 1.2–1.8 µg/mL, with the linear range reaching up to 50 µg/mL. We validated the method performance by testing a plant extract and quantifying cannabinoid content. This method is the first to separate 14 cannabinoids in one run using a CE system with UV detection.

Sweat-Based Noninvasive Skin-Patchable Urea Biosensors with Photonic Interpenetrating Polymer Network Films Integrated into PDMS Chips

A wearable noninvasive biosensor for in situ urea detection and quantification was developed using a urease-immobilized photonic interpenetrating polymer network (IPN_urease) film. The photonic IPN film was intertwined with solid-state cholesteric liquid crystals (CLC_solid) and a poly(acrylic acid) (PAA) network on a flexible poly(ethylene terephthalate) substrate adhered to a poly(dimethylsiloxane) (PDMS) chip that was fabricated using an aluminum mold. The presence of urea in the chemical matrix of human sweat red-shifted the reflected color of the photonic IPN_urease film, and quantification was achieved by observing the wavelength at the photonic band gap (λ_PBG) with a limit of detection of 0.4 mM and a linear range of 0.9-50 mM. The color changes observed in the photonic IPN film were digitalized using the CIE 1931 xy coordinates on a cell phone image, thereby enabling fast, direct diagnosis via a downloadable app. This novel PDMS chip can be expanded for use with other biosensors.