Characteristics of Periodontal Tissues in Prosthetic Treatment with Fixed Dental Prostheses

Evaluation of periodontal parameters on abutment teeth rehabilitated with single-unit crowns: A 12-month follow-up

Purpose

This prospective study evaluated the effects of the metal-free crowns on the periodontal tissues of abutment teeth during a 12-month follow-up.

Materials and Methods

A sample of 24 patients (N = 32 abutment teeth) who needed a single-tooth restoration were enrolled to receive either a metal-ceramic (n = 21) or lithium disilicate (n = 11). The single-unit crowns were evaluated at baseline, 3-and 12-month follow-up. The periodontal parameters were evaluated: plaque index (PI), gingival bleeding index (GBI), bleeding on probing (BOP), probing depth (PD), clinical attachment loss (CAL), radiographically and clinical crown fitting, bone resorption, and marginal finish lines. Statistical analyses were performed using the Exact Fisher and Mann-Whitney tests, and the Wilcoxon signed-rank test as a post hoc test for Friedman (95 % confidence interval).

Results

The marginal finish line showed a statistical difference with a biomaterial type (p =.004). After a 12-months, a significant increase was observed in PI and mean PD for abutment teeth of metal-ceramic crowns. The metal-free crowns presented higher values for GBI and CAL (p2 < 0.05). Only distal cervical evaluation and dental biofilm formation in the abutment teeth showed a statistical difference between the groups at the 12-month follow-up. The supragingival margin metal-ceramic group revealed higher PI values (p2 = 0.005) between the period and the subgingival margin of both biomaterials showed greater GBI scores (p2 < 0.05).

Conclusions

Metal-free crowns showed better periodontal outcomes compared to metal-ceramic crowns. Single-unit crown marginal location affects the periodontal tissue condition of the abutment teeth. The marginal fit was not changed regarding the biomaterial type.

Transforming smiles: Aesthetic rehabilitation with layered zirconia veneers and crowns for spaced dentition and faulty crowns-A case report

The objective of this case report was to provide a plan for aesthetic rehabilitation of a patient utilizing layered zirconia restorations to produce a homogeneous, pleasing smile. In this case, a female patient, aged 38 years, presented in dental clinic with a spaced dentition and faulty crowns that were causing functional and aesthetic concerns. She was a banker by profession and socially active. The treatment plan involved layered zirconia indirect restorations to enhance her natural teeth appearance. The aim of this case report was to propose an effective strategy for addressing her concerns, with the potential to achieve a desired aesthetic outcome. Additionally, the implementation of this treatment approach had a positive influence on self-esteem and confidence of the patient.

Stress distribution on implant- supported zirconia crown of maxillary first molar: effect of oblique load on natural and antagonist tooth

This study evaluated the stress distribution on an implant-supported zirconia crown of a mandibular first molar subjected to oblique loading by occlusal contact with the natural maxillary first molar by using the 3D finite element method. Two virtual models were made to simulate the following situations: (1) occlusion between maxillary and mandibular natural first molars; (2) occlusion between zirconia implant-supported ceramic crown on a mandibular first molar and maxillary natural first molar. The models were designed virtually in a modeling program or CAD (Computer Aided Design) (Rhinoceros). An oblique load of 100 N was uniformly applied to the zirconia framework of the crown. The results were obtained by the Von Mises criterion of stress distribution. Replacement of the mandibular tooth by an implant caused a slight increase in stress on portions of the maxillary tooth roots. The crown of the maxillary model in occlusion with natural antagonist tooth showed 12% less stress when compared with the maxillary (model in occlusion with the) implant-supported crown. The mandibular crown of the implant show 35% more stress when compared with the mandibular antagonist crown on the natural tooth. The presence of the implant to replace the mandibular tooth increased the stresses on the maxillary tooth, especially in the region of the mesial and distal buccal roots.

Analysis of subgingival microbiota and IL-1β, TNF-α and CX3CL1 levels in gingival crevicular fluid of fixed dental prostheses

Prosthetic biomaterials can affect the composition of the subgingival microbiota and consequently the production of proinflammatory cytokines, causing damage to the periodontium. A total of 40 patients were divided into two groups: 20 with monolithic zirconia (MZ) prostheses and 20 with porcelain fused to metal (PFM) with nickel-chromium (Ni-Cr) alloy prostheses. Subgingival plaque and gingival crevicular fluid samples were taken. The Checkerboard technique for DNA-DNA hybridization and the enzyme-linked immunosorbent assay technique were performed. Teeth with MZ presented a lower percentage of bleeding on probing and tooth mobility compared to teeth with PFM with Ni-Cr alloy. Prosthodontic teeth harbored higher total levels of the 18 bacterial species than non-prosthodontic teeth. There was a higher prevalence of S. gordonii and V. parvula species in PFM with Ni-Cr alloy compared to MZ. There was an increase in IL-1β, TNF-α and CX3CL1 levels in PFM with Ni-Cr alloy compared to MZ. MZ is a candidate biomaterial with fewer negative effects on the periodontium, allowing for longer prostheses longevity in the mouth.

Importance of periodontal phenotype in periodontics and restorative dentistry: a systematic review

BACKGROUND

Periodontal phenotype is regarded to be one of the key factors influencing the efficacy of restorative therapies in dental practice. The objective of the systematic review was to explore the importance of thin and thick periodontal phenotypes and how they affect the outcome of periodontal and restorative therapies by looking at a number of academic publications from various online databases.

METHODS

Following the PRISMA guidelines (Preferred Reporting Items for Systematic Review standards), relevant data will be searched and retrieved from three significant scientific databases, including PubMed, EBSCO, and Scopus. The articles with full texts that matched the keywords and published in English between 2018 and 2023 were taken into consideration.

RESULTS

The majorities of these articles were based on the type of periodontal phenotype and their impact on periodontal and restorative treatment outcomes were selected. The initial search yielded a total of 530 articles. Only 273 were relevant to the review's objectives, and these were considered for determining eligibility. Only 20 publications were eligible for analysis.

CONCLUSION

Understanding these anatomical aspects of periodontal phenotype is crucial to both periodontology and restorative dentistry. The clinical outcome of restorative, prosthetic, orthodontic, surgical, and periodontal therapies is determined in large part by the periodontal phenotype, which also plays a significant role in clinical failure or success in dental treatments.

TRIAL REGISTRATION

This study protocol registered with the International Prospective Register of Systematic Reviews (PROSPERO) dated 16th June 2023 with the registration ID CRD42023432568.

Estimation of serum C-reactive protein activity in periodontal health and disease and response to treatment: a clinico-biochemical study

Background

Periodontitis is a chronic infectious disease affecting periodontium having multifactorial etiology, can cause significant systemic challengein addition to localized inflammation, tissue damage, and bone resorption. A serological marker of systemic inflammation known as C-reactive protein has been linked to an increased risk for a number of pathological conditions, including cardiovascular diseases.

Aim

To estimate levels of serum C-reactive protein in healthy individuals and subjects with periodontal diseases and to compare serum C-reactive protein levels in subjects having periodontal disease pre-operatively & post-operatively.

Materials and methods

The study was conducted on 60 subjects age ranging from 35 to 60 years. 30 individuals with healthy periodontium were in group 1 (control group) and the remaining 30 were diagnosed as adult periodontitis were in group 2 (experimental group). Periodontal examination done using gingival index, plaque index, periodontal pocket depth, and Russel's index. CRP levels were examined between group 1 and group 2 and in group 2 between baseline visit before treatment and 2 months after treatment.

Results

The findings of this study show a significant connection between periodontal disease and the inflammatory marker CRP in the body, as well as a tendency for a significant decrease in serumCRP levels following periodontitis therapy. At baseline, there was a positive correlation among C-reactive protein, probing pocket depth, and Russell's index.

Conclusion

As CRP is a key mediator for cardiovascular disease, an increase in C- reactive protein levels in periodontal diseases suggests a significant connection between periodontitis and cardiovascular diseases. Early periodontal treatment might decrease the severity of cardiovascular disease that already exists. This suggests that periodontal examination should be part of routine practicealong with cardiovascular examination.

Quality of Fixed Dental Prostheses and Patient Satisfaction in a Sample From Saudi Arabia

BACKGROUND

The objective of the study was to retrospectively assess the clinical performance of dental prostheses, single crowns, and three-unit bridges to identify clinical biological and mechanical complications in the Ha'il province of Saudi Arabia.

METHODS

The study was conducted between March 2021 to October 2021 and included 421 patients who underwent crown and tooth-supported fixed partial denture (FPD) procedures at the Dental Polyclinics Center in the Ha'il region of Saudi Arabia from 2010-2020. The planned sampling approach was applied. Patients who underwent crown and FPD placements at the dental center within the scheduled period were identified through clinical assessments. The inclusion criteria were met by patients with three-unit FPDs and a single crown containing a natural contralateral tooth or teeth. A total of six general dentists conducted clinical exams. Patient satisfaction and technical and biological issues were the evaluation criteria for crowns and FPDs. The frequency and percentage of the various characteristics employed in the current investigation were ascertained using cross-tabulation. The Chi-square test was employed to assess the associations between categorical variables, with p-values ≤ 0.05 considered significant.  Results: Marginal integrity was recorded in 332 participants (78.9%), which was satisfactory for the majority of the restoration. The acceptance morphology was present in 252 (59.9%) restorations. The highest rate of the restorations 274 (66.2%) had satisfactory color. In 86 cases (20.4%), there was visible periodontal depth of at least 5 mm. Three hundred and six (72.7%) of the fixed restorations had gingival bleeding connected to them, and 96 (22.8%) teeth had periapical lesions. A total of 311 patients (73.9%) reported they were satisfied with their fixed restorations.

CONCLUSIONS

The technical and biological complications noted in the current study were not higher compared with other studies of crowns and fixed dental prostheses. The majority of patients were satisfied with the restoration.

Application of virtual reality in dental implants: a systematic review

BACKGROUND AND OBJECTIVE

A treatment approach that is widely used as a permanent and natural replacement for missing or extracted teeth is dental implants .VR is a computer-generated simulation that creates a three-dimensional (3D) image or environment. Advances in VR -based learning allow learners and students to practice and also help professionals plan a wide variety of surgical procedures, including the correct placement of dental implants. Therefore, in this systematic review, our aim was to investigate and evaluate the available virtual reality tools for dental implants and their effectiveness.

MATERIALS AND METHODS

Studies published up to 01/30/2023 which report the applications of using virtual reality technology in dental implants, were reviewed in three databases, including PubMed, Web of Science, and Scopus. All studies with evidence reporting the role of virtual reality technology in the field of dental implants were included in our analyses, written in English and published in peer-reviewed form, are included. Theoretical articles, and letters that did not provide original data, as well as studies that reported incomplete information, were excluded. Two reviewers independently assessed search results, extracted data, and assessed the quality of the included studies, and decisive agreement was reached by discussion and consultation with the third researcher. Narrative synthesis was undertaken to summarize and report the findings.

RESULTS

Out of 1633 initial search results, nine were included in the present study based on the inclusion criteria. The focus of seven studies was on teaching and learning, and two studies have examined the implant planning procedure. The most commonly used hardware and software were head-mounted display and Unity3D, respectively. In almost all studies, the results showed that the use of virtual reality-based systems improves and enhances the skills of users, including dental students and specialists.

CONCLUSIONS

Our findings showed that VR is an effective method for teaching and planning the implant process. Although the use of VR technology is limited for various reasons such as cost, it can increase the skills of dental professionals in performing dental implants.

Comparative Evaluation of the Accuracy of Gingival Thickness Measurement by Clinical Evaluation and Intraoral Ultrasonography

This study aimed to investigate the accuracy of gingival thickness measurement by two methods of clinical evaluation and intraoral ultrasonography. The gingival thickness was measured in the midbuccal area of the right maxillary lateral incisor and first molar teeth in 30 individuals. For clinical measurement, a #15 K-file with rubber stops was vertically inserted 2 mm apical to the gingival margin and the length of the file in the tissue was measured using a digital caliper. Ultrasonographic measurement was performed using an intraoral probe on the gingival surface in the midbuccal area, at the entry point of the file. Statistical analysis was performed by paired t-test, correlation coefficient, and receiver operating characteristic (ROC) curve (α = 0.05). In the anterior region, the mean gingival thicknesses using ultrasonography (1.517 ± 0.293 mm) and clinical evaluation (1.610 ± 0.272 mm) were not significantly different (p = 0.434). In the posterior region, the mean gingival thicknesses were significantly different between ultrasonography (1.372 ± 0.442 mm) and clinical evaluation (1.626 ± 0.310 mm) (p = 0.006). The area under ROC curve values for ultrasonographic measurements in the anterior and posterior regions were 0.681 and 0.597, respectively. The use of ultrasonography with an intraoral probe has acceptable accuracy for the determination of gingival thickness, especially for the anterior regions.

The Influence of Fixed Dental Prostheses on the Expression of Inflammatory Markers and Periodontal Status-Narrative Review

A dental prosthesis will only be successful if the restoration lasts for a long period and does not cause any illness. The presence of permanent prosthetic restorations has been linked to an increased risk of periodontal infections, according to a large body of research that has been gathered. When chronic inflammation is brought on by fixed prosthetic constructions, both cellular and noncellular immunity are activated as adaptive immune mechanisms. It has previously been stated that both clinically adequate and inadequate restorations might cause gingival inflammation. Areas surrounding the abutment teeth presented periodontal pockets, attachment loss, congestion, bleeding on probing, and gingival hyperplasia after fixed restorations were removed. The depth of pockets, bleeding on probing, and bone loss are all closely correlated with disease's severity and IL-1β concentration in gingival crevicular fluid; IL-1β shows higher values in disease sites than in healthy ones. hs-CRP and TNF-α blood levels showed a considerable reduction one day after fixed restorations were applied, in comparison with the pre-treatment values. Collaboration between prosthodontists and periodontists is essential for a good treatment outcome since it will increase the restoration's lifespan, enhance periodontal health, and improve the quality of life for dental patients.

Dental Luting Cements: An Updated Comprehensive Review

The cementation of indirect restoration is one of the most important steps in prosthetic and restorative dentistry. Cementation aims to bond the prosthetic restoration to the prepared enamel or enamel and dentine. Successful cementation protocols prevent biofilm formation at the margin between tooth and restoration and minimize mechanical and biological complications. With the advancements in dental cements, they have been modified to be versatile in terms of handling, curing, and bond strengths. This review presents updates on dental cements, focusing on the composition, properties, advantages, limitations, and indications of the various cements available. Currently, dental restorations are made from various biomaterials, and depending on each clinical case, an appropriate luting material will be selected. There is no luting material that can be universally used. Therefore, it is important to distinguish the physical, mechanical, and biological properties of luting materials in order to identify the best options for each case. Nowadays, the most commonly used dental cements are glass-ionomer and resin cement. The type, shade, thickness of resin cement and the shade of the ceramic, all together, have a tangible influence on the final restoration color. Surface treatments of the restoration increase the microtensile bond strength. Hence, the proper surface treatment protocol of both the substrate and restoration surfaces is needed before cementation. Additionally, the manufacturer's instructions for the thin cement-layer thickness are important for the long-term success of the restoration.

Potential Impact of Prosthetic Biomaterials on the Periodontium: A Comprehensive Review

The success of a prosthetic treatment is closely related to the periodontal health of the individual. The aim of this article was to review and present the importance of prosthetic restorative materials on the condition of the periodontium, the changes that occur in the composition of the subgingival microbiota and the levels of inflammatory markers in gingival crevicular fluid. Articles on the influence of different prosthetic restorative materials on subgingival microbiota and proinflammatory cytokines were searched for using the keywords "prosthetic biomaterials", "fixed prosthesis", "periodontal health", "subgingival microbiota", "periodontal biomarkers" and "gingival crevicular fluid" in PubMed/Medline, Science Direct, Scopus and Google Scholar. The type of material used for prosthesis fabrication together with poor marginal and internal fit can result in changes in the composition of the subgingival microbiota, as well as increased accumulation and retention of dentobacterial plaque, thus favoring the development of periodontal disease and prosthetic treatment failure. Biological markers have helped to understand the inflammatory response of different prosthetic materials on periodontal tissues with the main purpose of improving their clinical application in patients who need them. Metal-free ceramic prostheses induce a lower inflammatory response regardless of the fabrication method; however, the use of CAD/CAM systems is recommended for their fabrication. In addition, it is presumed that metal-ceramic prostheses cause changes in the composition of the subgingival microbiota producing a more dysbiotic biofilm with a higher prevalence of periodontopathogenic bacteria, which may further favor periodontal deterioration.

Clinical, Radiographic, and Inflammatory Peri-Implant Parameters around Narrow Diameter Implant Crowns among Prediabetic and Non-Diabetic Subjects

Background and Objectives: To compare the clinical, radiographic, and inflammatory peri-implant parameters around narrow diameter implants (NDI) supported single and splinted crowns in non-diabetics and prediabetes. Materials and Methods: The clinical and radiographic parameters and the levels of IL-6 and TNF-α in the peri-implant crevicular fluid (PICF) of narrow diameter single (NDISCs) and splinted (NDISPs) crown implants were assessed both in non-diabetics and participants with prediabetes. The glycemic state of the patient was assessed using glycated hemoglobin (HbA1c) levels. The peri-implant soft tissue indices (Plaque index (PI), bleeding on probing (BoP), probing depth (PD)) and marginal bone loss were recorded and compared between the groups. Success of the prosthesis was assessed by the frequency of technical complications and patient satisfaction. Inter-group comparison was performed using ANOVA (one-way analysis of variance) while the normal distribution of dependent variables was calculated using Shapiro-Wilk. A p-value of less than 0.05 was considered to be statistically significant. Results: Sixty participants (30 non-diabetics and 30 with prediabetes) with a total of 178 (118 NDISCs and 60 NDISPs) platform-switched NDIs were a part of the study. Of the 118 NDISCs, 56 were placed in the non-diabetic individuals and 62 were placed in the prediabetes group whereas 30 NDISPs each were placed in both the study groups. The clinical parameters of PI, BoP and PD in the single crown and splinted crown groups showed comparable results. However, a statistically significant difference (p-value of less than 0.05) in PI, BoP and PD and in the values of IL-6 and TNF-α was found when a comparison was made between the non-diabetes and prediabetes group. A total of 91% of the patients were satisfied with the esthetics of the implants while 79% of the patients showed satisfaction with function. Conclusions: All the clinical and radiographic parameters were statistically similar in both single and splinted types of narrow diameter implants. However, the bone loss, probing depth, plaque index, and levels of inflammatory markers were statistically higher in prediabetes as compared to non-diabetes implying that a slight hyperglycemic state impacts peri-implant health.

Biomolecular and Biochemical Aspects of the Oral Cavity

Recent advances in science, especially innovations in the field of biochemistry and materials science, greatly contribute to improvements in the prevention, diagnosis, and treatment of oral diseases [...].

Levels of whole salivary advanced glycation end products and interleukin-17 and peri-implant clinical and radiographic status in patients with osteoporosis at 6-years' follow-up

BACKGROUND

There are no studies that have assessed advanced glycation end products (AGEs) and interleukin 17A (IL-17A) levels in whole saliva (WS) of patients with dental implants. The aim was to compare levels of AGEs and IL-17A in WS and peri-implant clinical and radiographic status of patients with and without osteoporosis at 6-years' follow-up.

METHODS

Osteoporotic (Group-1) and systemically healthy controls (Group-2) having undergone dental implant therapy at least 5 years ago were included. A questionnaire was used to collect information about age, gender, duration and treatment of osteoporosis, number and duration of implants in function, and frequencies of toothbrushing, flossing and hygiene visits. Modified bleeding and plaque indies (mBI and mPI), peri-implant probing depth (PD) and crestal bone loss (CBL) were recorded. WS was collected and levels of AGEs and IL-17A were determined using enzyme linked immunosorbent assay. Sample-size estimation was done and statistical analyses were doing using the independent t- and Wilcoxon rank-sum tests. Statistical significance was marked for P-values that were below 0.01.

RESULTS

In patients with (n = 24) and without (n = 27) osteoporosis, implants were in function for 6.3 ± 0.27 and 6.6 ± 0.5 years, respectively. There was no significant difference in peri-implant mBI, PD, mPI and CBL in both groups. Levels of AGE in patients with (119.6 ± 26.5 μg/ml) and without (91.5 ± 14.6 μg/ml) osteoporosis were comparable. Levels of whole salivary IL-17A in patients without and with osteoporosis were 4.6 ± 0.3 and 5.1 ± 0.8 pg/ml, respectively. Flossing of full mouth interproximal spaces once and twice daily toothbrushing daily was reported by 100% patients with osteoporosis. Among patients with osteoporosis 75% and 25% individuals were receiving professional dental prophylaxis every 4 and 6 months, respectively.

CONCLUSION

Within the limitations of the present study osteoporotic patients are not at an increased risk of peri-implant diseases and can demonstrate salivary AGE and IL-17A levels comparable to non-osteoporotic individuals as long as oral hygiene is stringently maintained.

Synthetic materials in craniofacial regenerative medicine: A comprehensive overview

The state-of-the-art approach to regenerating different tissues and organs is tissue engineering which includes the three parts of stem cells (SCs), scaffolds, and growth factors. Cellular behaviors such as propagation, differentiation, and assembling the extracellular matrix (ECM) are influenced by the cell's microenvironment. Imitating the cell's natural environment, such as scaffolds, is vital to create appropriate tissue. Craniofacial tissue engineering refers to regenerating tissues found in the brain and the face parts such as bone, muscle, and artery. More biocompatible and biodegradable scaffolds are more commensurate with tissue remodeling and more appropriate for cell culture, signaling, and adhesion. Synthetic materials play significant roles and have become more prevalent in medical applications. They have also been used in different forms for producing a microenvironment as ECM for cells. Synthetic scaffolds may be comprised of polymers, bioceramics, or hybrids of natural/synthetic materials. Synthetic scaffolds have produced ECM-like materials that can properly mimic and regulate the tissue microenvironment's physical, mechanical, chemical, and biological properties, manage adherence of biomolecules and adjust the material's degradability. The present review article is focused on synthetic materials used in craniofacial tissue engineering in recent decades.

Digitally Guided Workflow for the Esthetic and Prosthetic Oral Rehabilitation of a Patient with Excessive Gingival Display: A Case Report

This report describes the esthetic and prosthetic oral rehabilitation of a patient with excessive gingival display using a digital guided workflow. As per this digital workflow, the patient’s photographs, three-dimensional radiographic images, and a diagnostic digital intraoral scan were obtained. Preoperative digital case planning and designing were followed by the fabrication of surgical guides, printed casts, and matrices to accurately execute surgical esthetic crown lengthening and reproduce the digital design in the subsequent prosthetic rehabilitation.

Effect of Erosive Agents on Surface Characteristics of Nano-Fluorapatite Ceramic: An In-Vitro Study

Erosive beverages cause dissolution of natural teeth and intra-oral restorations, resulting in surface characteristic changes, particularly roughness and degradation. The purpose of this study was to evaluate the surface roughness and topography of a dental ceramic following immersion in locally available erosive solutions. A total of 160 disc specimens of a nano-fluorapatite type ceramic (12 mm diameter and 2 mm thickness) were fabricated and equally distributed into two groups (n = 80) and then evenly distributed among the following five testing groups (n = 16): lemon juice, citrate buffer solution, 4% acetic acid, soft cola drink, and distilled water which served as a control. The surface roughness (Ra) and topography were evaluated using a profilometer and scanning electron microscope at baseline, 24 h, 96 h, and 168 h respectively. Data were analyzed using ANOVA and Tukey’s multiple comparisons (p ≤ 0.05). Surface changes were observed upon exposure to all acidic beverages except distilled water. Amongst all immersion media, 4% acetic acid produced the most severe surface roughness across all time periods (i.e., baseline, 24 h, 96 h, and 168 h). A statistically significant difference in the surface roughness values between all immersion media and across all four time intervals was observed. Erosive agents had a negative effect on the surface roughness and topography of the tested ceramic. The surface roughness increased with increased storage time intervals.

Tooth root resorption: A review

Tooth root resorption is multifactorial, leading to progressive destruction and eventual loss of tooth root dentin and cement. There are internal and external types of root resorption, each having its variety. The etiology and pathogenesis of tooth root resorption are poorly understood, and the most significant etiological factors are trauma, pulpal infection, tooth bleaching, and orthodontic treatment. Tooth root resorption is primarily asymptomatic; thus, it is revealed accidentally by radiographic examination. Progressive clinical manifestations are pain, tooth discoloration, tooth mobility, and other conditions. Awareness of the causes and risk factors allowing tooth root resorption, and regular radiographic examination, in case of necessity, make it possible to reveal resorption at an early stage and to prevent its further development. Thus, the aim of this study is to present etiopathogenesis, a clinical course, and diagnostic peculiarities of internal and external types of tooth root resorption, enabling practicing dentists to timely diagnose root resorption and take appropriate measures to avoid further complications. Within the limitation of this review, even though the etiopathogenesis of tooth root resorption is yet not fully understood, it is suggested that the etiological factors fall into two groups (endogenic and exogenic) to enhance further understanding of the possible causes and mechanisms of root resorption and allow practitioners to monitor high-risk patients and make timely diagnoses. Moreover, radiographic examination and CBCT are indispensable for the diagnosis of root resorption.

Comparison of Short-Term Restorative Effects and Periodontal Health Status of Restorations Made of Different Materials in Full-Crown Restoration of Mandibular Premolar Tooth Defects

Purpose

To compare the short-term restorative effect and periodontal health status of restorations with different materials in full-crown restoration of mandibular premolar tooth defects.

Methods

A total of 105 cases (123 affected teeth) of mandibular premolar tooth defects who visited the Department of Stomatology between January 2019 and January 2020 were selected, of which 58 cases (68 affected teeth) restored with cobalt-chromium alloy porcelain crowns were included in the metal-ceramic crown (MCC) group and 47 cases (55 affected teeth) repaired by zirconium dioxide all-ceramic crowns were assigned to the zirconia crown (ZC) group. The restorative effect, inflammatory factors (high-sensitivity C-reactive protein (hs-CRP) and tumor necrosis factor-α (TNF-α)) and periodontal health indicators (human cartilage glycoprotein-39 (YKL-40), resistin, aspartate aminotransferase (AST), and alkaline phosphatase (ALP)) after treatment, and the occurrence of adverse reactions were compared between the two groups.

Results

The ZC group outperformed the MCC group in terms of margin fitness, restoration fracture, gingival condition, and color matching. After restoration, hs-CRP and TNF-α were statistically decreased in both groups, while YKL-40, resistin, AST, and ALP were significantly increased; and compared with the MCC group, hs-CRP, TNF-α, YKL-40, resistin, AST, and ALP were lower in the ZC group. The ZC group also scored statistically higher in retention effect, aesthetic effect, masticatory function, voice function, and comfort. Moreover, the ZC group had a higher total effective rate and a lower incidence of adverse reactions than the MCC group, with statistical significance.

Conclusions

Zirconia dioxide all-ceramic crowns contribute to a better short-term restorative effect in the full-crown restoration of mandibular premolar tooth defects, with little impact on periodontal health and high patient satisfaction, which deserves popularization and application.

An Interdisciplinary Study Regarding the Characteristics of Dental Resins Used for Temporary Bridges

Background and Objectives: The surface condition of the materials that are used for temporary prostheses influences their microbial colonization, with a direct impact on the oral tissues. This study aims at a comparative analysis of three types of resins for temporary bridges using conventional and digital technologies. The attention was focused on the analysis of the surface characteristics and mechanical strength of these materials. Materials and Methods: The surface condition was assessed for three distinct materials both before and after polishing- heat-curing resin Superpont C + B (SpofaDental, Jicin, Czech Republic) used unconventional technology, Zotion dental milling polymethyl methacrylate (PMMA) block (Zotion, Chongqing, China) for provisional crowns/bridges used in digital subtractive technologies and Freeprint Temp (Detax GmbH & Co. KG, Ettlingen, Germany) resin for temporary crowns and bridges that are used in 3D printing technologies. The two-way ANOVA analysis indicated that polishing leads to a statistically significant increase in roughness coefficients for all the three resins that were tested (p < 0.001). While the highest roughness coefficients were displayed in the 3D cured sample, the largest decrease was reported by the milled sample Results: The results revealed that surface roughness was significantly influenced by both the type of resin that was used (p < 0.001) and the treatment that was induced by finishing and polishing (p < 0.001). Similar p-values were obtained for each of the three resins. Conclusions: The results demonstrated a significant optimization of the surfaces after finishing and polishing and statistically significant differences between the surface parameters and the mechanical properties of the samples. The low values of the roughness and the acceptable values of the mechanical resistance for the conventional samples indicate these materials for the long-term temporary bridge’s realization, allowing the correct restoration of the functions and the rehabilitation at the oral level.

Multidisciplinary non-surgical treatment of advanced periodontitis: A case report

BACKGROUND

Patients with severe periodontitis often require multidisciplinary treatment to achieve healthy periodontal tissue, normal occlusion, and optimal aesthetics. In the present study, we aimed to evaluate the efficacy of multidisciplinary non-surgical treatment in a patient with stage IV/ grade C periodontitis, malocclusion, and dentition defects.

CASE SUMMARY

A 47-year-old woman visited our periodontology department due to teeth mobility problems and difficulties chewing food. The patient had no history of drug allergies or systemic disease. Initial therapy involved scaling and root planning with a Gracey scaler and periodontal ultrasonic therapeutic apparatus using a periodontal endoscope (Perioscopy, Zest Dental Solutions, United States) to control the periodontal inflammation prior to treatment. Five months later, orthodontic treatment was then performed to treat occlusion and overall aesthetics. After completion, a Maryland bridge was used to restore Nos. 22, 31, and 41 teeth. Florida probing (Florida probe, United States) was performed every 2-3 mo to evaluate the periodontal condition throughout treatment. Overall, multidisciplinary non-surgical treatment resulted in satisfactory aesthetic results with healthy periodontal tissue and stable occlusion.

CONCLUSION

In some patients with stage IV/grade C periodontitis, systematic and sequential non-surgical treatment can provide excellent therapeutic results.

Evaluation of Zirconia and High Performance Polymer Abutment Surface Roughness and Stress Concentration for Implant-Supported Fixed Dental Prostheses

Background: The High Performance Polymer is a based polymer biomaterial that was introduced as dental material to manufacture dentures superstructure and dental implants abutments. However, its surface characteristics and stress state still need to be properly described. The aim of this study was to compare the surface characteristics of a High Performance Polymer (Bio-HPP, Bredent, Senden, Germany) for computer-aided design and computer-aided manufacturing (CAD/CAM) milling and a Zirconia (Zirkonzahn, Steger, Ahrntal, Italy). Methods: The abutments surface roughness (Ra) was evaluated for each abutment material (N = 12) using a confocal laser microscope. Data were evaluated using One-Way ANOVA and Tukey tests (p < 0.05). In addition, a finite element analysis software was used to present stress measurement data as stress maps with 100 N loading. Results were generated according to Von-mises stress criteria and stress peaks were recorded from each structure. Results: Results showed a mean Ra of 0.221 ± 0.09 μm for Bio-HPP and 1.075 ± 0.24 μm for Zirconia. Both surface profiles presented a smooth characteristic regardless the measurement axis. The stress peaks from implant fixture and screw were not affected by the abutment material, however the high performance polymer showed the highest stress magnitude for the abutment region. Conclusions: Comparing the present results with the literature it is suggested that the CAD/CAM High Performance Polymer abutments present an adequate surface roughness with acceptable values of stress.

Evaluation of Therapeutic Benefits of a Novel Herbal Ingredient-Based Hyaluronic Acid Gel as Monotherapy for Inflammatory Enlargement of a Patient with Diabetes Mellitus

The reason for the destruction of the attachment apparatus in patients with periodontal disease is the supra- and the subgingival microflora. Hence, the treatment of this inflammatory gingival disease is primarily focused on eliminating the cause. The present case report assessed the therapeutic benefit of adjunctive use of a commercially available topical agent containing 1% hyaluronic acid gel combined with nonsurgical periodontal therapy. A patient aged 64 years with type 2 diabetes mellitus reported to the Department of Periodontology. He complained of gum enlargement and frequent bleeding during brushing. The patient was not under any medication for his diabetes control. On examination, there was a localized papillary gingival enlargement. Therefore, Klirich gel containing hyaluronic acid was applied on the surface of the gingiva during the first visit of the patient. During the follow-up visit, he continued with this adjunctive use of the gel along with the nonsurgical periodontal therapy. In addition, he controlled his blood sugar level with diet and exercise. During the follow-up visit after one year, there was a noticeable clinical change in the overall health of his gingiva.

Fixed Prosthetic Restorations and Periodontal Health: A Narrative Review

Periodontal health plays an important role in the longevity of prosthodontic restorations. The issues of comparative assessment of prosthetic constructions are complicated and not fully understood. The aim of this article is to review and present the current knowledge regarding the various technical, clinical, and molecular aspects of different prosthetic biomaterials and highlight the interactions between periodontal health and prosthetic restorations. Articles on periodontal health and fixed dental prostheses were searched using the keywords “zirconium”, “CAD/CAM”, “dental ceramics”, “metal–ceramics”, “margin fit”, “crown”, “fixed dental prostheses”, “periodontium”, and “margin gap” in PubMed/Medline, Scopus, Google Scholar, and Science Direct. Further search criteria included being published in English, and between January 1981 and September 2021. Then, relevant articles were selected, included, and critically analyzed in this review. The margin of discrepancy results in the enhanced accumulation of dental biofilm, microleakage, hypersensitivity, margin discoloration, increased gingival crevicular fluid flow (GCF), recurrent caries, pulp infection and, lastly, periodontal lesion and bone loss, which can lead to the failure of prosthetic treatment. Before starting prosthetic treatment, the condition of the periodontal tissues should be assessed for their oral hygiene status, and gingival and periodontal conditions. Zirconium-based restorations made from computer-aided design and computer-aided manufacturing (CAD/CAM) technology provide better results, in terms of marginal fit, inflammation reduction, maintenance, and the restoration of periodontal health and oral hygiene, compared to constructions made by conventional methods, and from other alloys. Compared to subgingival margins, supragingival margins offer better oral hygiene, which can be maintained and does not lead to secondary caries or periodontal disease.

MORPHOLOGICAL CHANGES OF PERIODONTAL COMPONENTS UNDER EXPERIMENTAL LIPOPOLYSACCHARIDE PERIODONTITIS COMBINED WITH HYPERTHYROIDISM

OBJECTIVE

The aim: Investigate structural changes in the tissues of the periodontal complex under the condition of experimental lipopolysaccharide periodontitis combined with hyper¬thyroidism.

PATIENTS AND METHODS

Materials and methods: The studies were performed on adult white male rats, which simulated periodontitis combined with hyperthyroidism. Periodontal tissues were subjected to morphological examination on the 22nd day of the experiment. Collection of material for microscopic examinations was performed according to the generally accepted method; histological specimens were studied using a light optical microscope.

RESULTS

Results: Morphological studies of the components of the periodontal complex of experimental animals with experimental periodontitis established the reorganization of its structural elements. Damage to the epithelium in the area of attachment of the circular ligament and erosive-ulcerative changes of the gums led to a deepening of the gingival sulcus with the formation of a deep periodontal pocket. Intense hyperkeratosis was observed in the area of the bottom of the periodontal pocket. In the own plate of the mucous membrane of the gums - significant edema, collagen fibers were disorganized, defragmented. There were pronounced destructive-degenerative and inflammatory changes of the epithelial and own plates of all areas of the gums and periodontium, damage to the nuclei and cytoplasm of keratinocytes, fibroblasts, and leukocytes.

CONCLUSION

Conclusions: Experimental periodontitis combined with hyperthyroidism is accompanied by pronounced signs of destructive and inflammatory changes in the soft and dense tissues of the periodontal complex, as well as disruption of stromal-vascular interactions, which progress from reversible to irreversible disruption of periodontal connective tissue.

Wear Resistance, Color Stability and Displacement Resistance of Milled PEEK Crowns Compared to Zirconia Crowns under Stimulated Chewing and High-Performance Aging

Recently, polyetheretherketone (PEEK) has been introduced to the dental market as a high-performance and chemically inert biomaterial. This study aimed to compare the wear resistance, abrasiveness, color stability, and displacement resistance of zirconia and PEEK milled crowns. An ideal tooth preparation of a first maxillary molar was done and scanned by an intraoral scanner to make a digital model. Then, the prosthetic crown was digitally designed on the CAD software, and the STL file was milled in zirconia (CaroZiir S, Carol Zircolite Pvt. Ltd., Gujarat, India) and PEEK (BioHpp, Bredent GmbH, Senden, Germany) crowns using five-axis CNC milling machines. The wear resistance, color stability, and displacement resistance of the milled monolithic zirconia with unfilled PEEK crowns using a chewing simulator with thermocyclic aging (120,000 cycles) were compared. The antagonist wear, material wear, color stability, and displacement were evaluated and compared among the groups using the Wilcoxon-Mann-Whitney U-test. Zirconia was shown to be three times more abrasive than PEEK (p value < 0.05). Zirconia had twice the wear resistance of PEEK (p value < 0.05). Zirconia was more color stable than PEEK (p value < 0.05). PEEK had more displacement resistance than zirconia (p value < 0.05). PEEK offers minimal abrasion, better stress modulation through plastic deformation, and good color stability, which make it a promising alternative to zirconia crown.

Effect of Biologically Oriented Preparation Technique on the Stress Concentration of Endodontically Treated Upper Central Incisor Restored with Zirconia Crown: 3D-FEA

The aim of this study was to evaluate the effect of biologically oriented preparation technique on the stress concentration of endodontically treated upper central incisors restored with zirconia crown (yttria-stabilized zirconia polycrystalline ceramic) through finite element analysis (FEA). Four models of maxillary central incisors containing enamel, dentin, periodontal ligament, cortical and medullary bone were created in CAD. Each model received a polymeric core-build up with nanofilled dental resin composite. The evaluated models were SM-preparation in shoulder 90°; CM-chamfer preparation; BOPT-biologically oriented preparation technique and BOPTB-BOPT preparation 1 mm below the cement-enamel junction. All models received zirconia crowns (5Y-TZP), fiberglass post and 1 mm ferrule. The models were imported into the analysis software with parameters for mechanical structural testing using the maximum principal stress and the tensile strength as the analysis criteria. Then, load of 150 N was applied at the cingulum with 45° slope to the long axis of the tooth, with the fixed base for each model. The type of marginal preparation affected the stresses concentration in endodontically treated teeth and in the zirconia crown margin. Considering the stress magnitude only, BOPT is a viable option for anterior monolithic zirconia crowns; however, with the highest stress magnitude at the restoration margin.

Comparison of Fracture Load of the Four Translucent Zirconia Crowns

Recently, translucent zirconia has become the most prevalent material used as a restorative material. This study aimed to compare the crown fracture load of the four most common different translucent zirconia brands available in the market at 1.5 mm thickness. Standardized tooth preparations for a full ceramic crown were designed digitally with software (AutoCAD) by placing a 1.0 mm chamfer margin and 1.5 mm occluso-cervical curvature for the crown sample manufacturing. Stylized crowns were chosen to control the thickness of the crown. The axial and occlusal thickness were standardized to 1.5 mm thickness except at the central pit, which was 1.3 mm thick. The STL file for the tooth dies was prepared using software (3Shape TRIOS^® Patient Monitoring, Copenhagen, Denmark). The tooth dies were printed with a resin material (NextDent Model 2.0, Vertex-Dental B.V., Soesterberg, The Netherlands) using a 3D printing software (3D Sprint^® Client Version 3.0.0.2494) from a 3D printer (NextDent™ 5100, Vertex-Dental B.V., Soesterberg, The Netherlands). The printing layer thickness was 50 µm. Then, a total of twenty-eight (N = 28) stylized crowns were milled out of AmannGirrbach (Amann Girrbach GmbH, Pforzheim, Germany) (n = 7), Cercon HT (Dentsply Sirona, Bensheim, Germany) (n = 7), Cercon XT (Dentsply Sirona, Bensheim, Germany) (n = 7), and Vita YZ XT (Zahnfabrik, Bäd Sackingen, Germany) (n = 7). Following sintering the crowns, sandblasting was performed and they were bonded to the tooth dies with the resin cement (RelyX U-200, 3M ESPE, Seefeld, Germany) and permitted to self-cure under finger pressure for 6 min. The crowns were loaded on the occlusal surface in a universal testing machine (MTS Centurion) with a stainless-steel ball indenter (7 mm radius) with a loading rate of 1 mm/min to contact the stylized crowns on each of the four cusps until failure. A rubber sheet (1.5 mm thickness) was positioned between the crown and indenter, which helped with the load distribution. Statistical analysis was done using SPSS version 20 (IBM Company, Chicago, USA). The fracture loads were analyzed using Dunnett’s T3 test, and the number of cracks was analyzed using the Mann–Whitney U test among the groups. The significant level was set at p value = 0.05. The mean fracture loads were 3086.54 ± 441.74 N, 4804.94 ± 70.12 N, 3317.76 ± 199.80 N, and 2921.87 ± 349.67 N for AmannGirrbac, Cercon HT, Cercon XT, and Vita YZ XT, respectively. The mean fracture loads for the surfaces with the greatest number of cracks (excluding the occlusal surfaces) were on the lingual surface for AmannGirrbach and Cercon HT, on the distal and mesial for Cercon XT, and on the buccal for Vita YZ XT. We found that the AmannGirrbach had the most overall cracks. Cercon XT had the greatest number of occlusal cracks and appeared to be the most shattered. Cercon HT had the least number of cracks. In conclusion, Cercon HT presented the best strength properties, the highest fracture load, and no visible cracks. AmannGirrbach presented the lowest strength properties.

Bacteriological Evaluation of Gingival Crevicular Fluid in Teeth Restored Using Fixed Dental Prostheses: An In Vivo Study

The present in vivo study determined the microbiological counts of the gingival crevicular fluid (GCF) among patients with fixed dental prostheses fabricated using three different techniques. A total of 129 subjects were divided into three study groups: first, cobalt-chrome-based, metal-ceramic prostheses fabricated by the conventional method (MC, n = 35); the second group consisted of cobalt-chrome-based, metal-ceramic prostheses fabricated by the computer-aided design and computer-aided manufacturing (CAD/CAM) technique (CC-MC, n = 35); the third group comprised zirconia-based ceramic prostheses fabricated using the CAD/CAM technique (CC-Zr, n = 35). The control consisted of 24 patients using prostheses fabricated with either MC, CC-MC, or CC-Zr. The GCF was obtained from the subjects before treatment, and 6 and 12 months after the prosthetic treatment. Bacteriological and bacterioscopic analysis of the GCF was performed to analyze the patients’ GCF. The data were analyzed using SPSS V20 (IBM Company, Chicago, IL, USA). The number of microorganisms of the gingival crevicular fluid in all groups at 12 months of prosthetic treatment reduced dramatically compared with the data obtained before prosthetic treatment. Inflammatory processes in the periodontium occurred slowly in the case of zirconium oxide-based ceramic constructions due to their biocompatibility with the mucous membranes and tissues of the oral cavity as well as a reduced risk of dental biofilm formation. This should be considered by dentists and prosthodontists when choosing restoration materials for subjects with periodontal pathology.