Titanium Dioxide Nanoparticles: Prospects and Applications in Medicine

Ferula latisecta gels for synthesis of zinc/silver binary nanoparticles: antibacterial effects against gram-negative and gram-positive bacteria and physicochemical characteristics

This study explores the potential antibacterial applications of zinc oxide nanoparticles (ZnO NPs) enhanced with silver (Ag) using plant gel (ZnO-AgO NPs). The problem addressed is the increasing prevalence of pathogenic bacteria and the need for new, effective antimicrobial agents. ZnO NPs possess distinctive physicochemical properties that enable them to selectively target bacterial cells. Their small size and high surface area-to-volume ratio allow efficient cellular uptake and interaction with bacterial cells. In this study, the average size of the synthesized ZnO-Ag nanoparticles was 77.1 nm, with a significant standard deviation of 33.7 nm, indicating a wide size distribution. The nanoparticles demonstrated remarkable antibacterial efficacy against gram-negative and gram-positive bacteria, with inhibition zones of 14.33 mm for E. coli and 15.66 mm for B. subtilis at a concentration of 300 µg/ml. Minimum inhibitory concentrations (MIC) were determined to be 100 µg/ml for E. coli and 75 µg/ml for S. saprophyticus. Additionally, ZnO-Ag NPs exhibited excellent biocompatibility, making them appropriate for various pharmacological uses. This study utilizes Ferula latisecta gels, offering a sustainable and eco-friendly approach to nanoparticle synthesis. Incorporating of Ag into ZnO NPs significantly enhances their antimicrobial properties, with the combined results showing great inhibition effects on pathogenic microbes. The findings suggest that ZnO-Ag NPs could be a promising candidate for addressing the challenges posed by drug-resistant bacterial infections and enhancing antimicrobial treatments.

Photocatalytic Tandem Protocol for the Synthesis of Bis(indolyl)methanes using Cu-g-C3N4-Imine Decorated on TiO2 Nanoparticles under Visible Light Irradiation

In this article, the visible-light-assisted photocatalytic activity of TiO2 nanoparticles functionalized with Cu(II) g-C3N4-imine was exploited for aerobic oxidation of alcohols to aldehydes followed by condensation with indoles in the presence of 2,2,6,6-tetramethylpiperidinyloxy to present a one-pot tandem strategy for the synthesis of bis(indolyl)methanes (BIMs) under solvent-free conditions. The synergistic effect between the components to improve the photocatalytic activity of the as-prepared Cu-g-C3N4-imine/TiO2 nanoparticles resulting from electron-hole separation was approved by PL spectroscopy. Moreover, action spectra showed a light-dependent photocatalysis with effective visible-light responsivity of the photocatalyst. The present method includes different aspects of green chemistry: one-pot tandem synthesis of a variety of BIMs using alcohols that are less toxic, more available, more economical, and more stable than aldehydes; removing the byproducts resulting from overoxidation of alcohols and polymerization of aldehydes and indoles; the use of air as a safe oxidant; visible light as a safe energy source; and solvent-free conditions. A reusability test demonstrated that the catalyst retained its efficiency even after five runs.

Seizing the Hidden Assassin: Current Detection Strategies for Staphylococcus aureus and Methicillin-Resistant S. aureus

Staphylococcus aureus (S. aureus) is a kind of pathogenic bacteria which can lead to food poisoning, hospital, and community infections. S. aureus and methicillin-resistant S. aureus (MRSA) have become headaches for public health worldwide. Therefore, strengthening the detection of S. aureus and MRSA is a critical step to prevent and control its spread and infection. This review summarized multiple detection methods (electrochemical, optical, and other biosensors) for sensitive and efficient detection of nonresistant and resistant S. aureus. First, we have introduced the principle and methods of detection platform for S. aureus and MRSA. We also contrasted various detection strategies. Finally, the current situation and prospect of S. aureus and MRSA detection in the future are explored in depth, and its development direction of detection methods is also predicted. In this review, we found that although biosensors have shown tremendous brilliance in the field of monitoring, they are currently in the experimental stage. It can be certain that we are very close to entering the commercialization stage. The point-of care testing available to nonprofessionals will become a new direction. We firmly believe that the monitoring system will be more perfect and stable and public life will be healthier and safer.

A double-edged sword: The complex interplay between engineered nanoparticles and platelets

Nanoparticles (NP) play a crucial role in nanomedicine, serving as carriers for localized therapeutics to allow for precise drug delivery to specific disease sites and conditions. When injected systemically, NP can directly interact with various blood cell types, most critically with circulating platelets. Hence, the potential activation/inhibition of platelets following NP exposure must be evaluated a priori due to possible debilitating outcomes. In recent years, various studies have helped resolve the physicochemical parameters that influence platelet-NP interactions, and either emphasize nanoparticles' therapeutic role such as to augment hemostasis or to inhibit thrombus formation, or conversely map their potential undesired side effects upon injection. In the present review, we discuss some of the main effects of several key NP types including polymeric, ceramic, silica, dendrimers and metallic NPs on platelets, with a focus on the physicochemical parameters that can dictate these effects and modulate the therapeutic potential of the NP. Despite the scientific and clinical significance of understanding Platelet-NP interactions, there is a significant knowledge gap in the field and a critical need for further investigation. Moreover, improved guidelines and research methodologies need to be developed and implemented. Our outlook includes the use of biomimetic in vitro models to investigate these complex interactions under both healthy physiological and disease conditions.

Adsorption of Glycine on TiO2 in Water from On-the-fly Free-Energy Calculations and In Situ Electrochemical Impedance Spectroscopy

We report here an experimental-computational study of hydrated TiO2 anatase nanoparticles interacting with glycine, where we obtain quantitative agreement of the measured adsorption free energies. Ab initio simulations are performed within the tight binding and density functional theory in combination with enhanced free-energy sampling techniques, which exploit the thermodynamic integration of the unbiased mean forces collected on-the-fly along the molecular dynamics trajectories. The experiments adopt a new and efficient setup for electrochemical impedance spectroscopy measurements based on portable screen-printed gold electrodes, which allows fast and in situ signal assessment. The measured adsorption free energy is -30 kJ/mol (both from experiment and calculation), with preferential interaction of the charged NH3+ group which strongly adsorbs on the TiO2 bridging oxygens. This highlights the importance of the terminal amino groups in the adsorption mechanism of amino acids on hydrated metal oxides. The excellent agreement between computation and experiment for this amino acid opens the doors to the exploration of the interaction free energies for other moderately complex bionano systems.

Common Transition Metal Oxide Nanomaterials in Electrochemical Sensors for the Diagnosis of Monoamine Neurotransmitter‐Related Disorders

Monoamine neurotransmitters are essential for learning, mental alertness, emotions, and blood flow, among other functions. Fatal neurological disorders that signal the imbalance of these biomolecules in the human system include Parkinson's disease, myocardial infarction, Alzheimer's disease, hypoglycemia, Schizophrenia, and a host of other ailments. The diagnosis of these monoamine neurotransmitter‐related conditions revolves around the development of analytical tools with high sensitivity for the four major monoamine neurotransmitters namely dopamine, epinephrine, norepinephrine, and serotonin. The application of electrochemical sensors made from notable metal oxide nanoparticles or composites containing the metal oxide nanoparticles for the detection of these monoamine neurotransmitters was discussed herein. More importantly, the feasibility of the application of the ZnO, CuO, and TiO2 nanoparticle‐based electrochemical sensors for a comprehensive diagnosis of monoamine neurotransmitter‐related conditions was critically investigated in this review.

A Stimulus-Responsive Ternary Heterojunction Boosting Oxidative Stress, Cuproptosis for Melanoma Therapy

Cuproptosis, a recently discovered copper-dependent cell death, presents significant potential for the development of copper-based nanoparticles to induce cuproptosis in cancer therapy. Herein, a unique ternary heterojunction, denoted as HACT, composed of core-shell Au@Cu2O nanocubes with surface-deposited Titanium Dioxide quantum dots and modified with hyaluronic acid is introduced. Compared to core-shell AC NCs, the TiO2/Au@Cu2O exhibits improved energy structure optimization, successfully separating electron-hole pairs for redox use. This optimization results in a more rapid generation of singlet oxygen and hydroxyl radicals triggering oxidative stress under ultrasound radiation. Furthermore, the HACT NCs initiate cuproptosis by Fenton-like reaction and acidic environment, leading to the sequential release of cupric and cuprous ions. This accumulation of copper induces the aggregation of lipoylated proteins and reduces iron-sulfur proteins, ultimately initiating cuproptosis. More importantly, HACT NCs show a tendency to selectively target cancer cells, thereby granting them a degree of biosecurity. This report introduces a ternary heterojunction capable of triggering both cuproptosis and oxidative stress-related combination therapy in a stimulus-responsive manner. It can energize efforts to develop effective melanoma treatment strategies using Cu-based nanoparticles through rational design.

Nano revolution in cardiovascular health: Nanoparticles (NPs) as tiny titans for diagnosis and therapeutics

Cardiovascular diseases (CVDs) are known as life-threatening illnessescaused by severe abnormalities in the cardiovascular system. They are a leading cause of mortality and morbidity worldwide.Nanotechnology integrated substantialinnovations in cardiovascular diagnostic and therapeutic at the nanoscale. This in-depth analysis explores cutting-edge methods for diagnosing CVDs, including nanotechnological interventions and crucial components for identifying risk factors, developing treatment plans, and monitoring patients' progress with chronic CVDs.Intensive research has gone into making nano-carriers that can image and treat patients. To improve the efficiency of treating CVDs, the presentreview sheds light on a decision-tree-based solution by investigating recent and innovative approaches in CVD diagnosis by utilizing nanoparticles (NPs). Treatment choices for chronic diseases like CVD, whose etiology might take decades to manifest, are very condition-specific and disease-stage-based. Moreover, thisreview alsobenchmarks the changing landscape of employing NPs for targeted and better drug administration while examining the limitations of various NPs in CVD diagnosis, including cost, space, time, and complexity. To better understand and treatment of cardiovascular diseases, the conversation moves on to the nano-cardiovascular possibilities for medical research.We also focus on recent developments in nanoparticle applications, the ways they might be helpful, and the medical fields where they may find future use. Finally, this reviewadds to the continuing conversation on improved diagnosis and treatment approaches for cardiovascular disorders by discussing the obstacles and highlighting the revolutionary effects of nanotechnology.

Combined exposure of nano-titanium dioxide and polystyrene nanoplastics exacerbate oxidative stress-induced liver injury in mice by regulating the Keap-1/Nrf2/ARE pathway

It is well known that polystyrene nanoplastics (PS-NaP) and nano-titanium dioxide (TiO2 NPs) are frequently co-appeared in daily life and can cause liver injury when they accumulate in the liver. Nonetheless, the combined toxicological impacts and potential molecular mechanisms of PS-NaP and TiO2 NPs in the hepatic system have not been revealed. Thus, we conducted experiments on C57BL/6 mice exposed to PS-NaP or/and TiO2 NPs for 4 weeks. The findings suggested that PS-NaP and TiO2 NPs co-exposed significantly altered the hepatic function parameters, levels of antioxidant-related enzymes and genes expression of Keap-1/Nrf2/ARE signaling pathway, as well as significantly increased the hepatic Ti contents, aggravated hepatic pathological and oxidative stress (OS) damage compared with individual exposure to PS-NaP or TiO2 NPs. Using N-Acetyl-L-cysteine (NAC), an OS inhibitor, we further demonstrated that OS played a pivotal role in coexposure-induced liver injury. NAC reduced the levels of OS in mice, which mitigated co-exposure-induced liver injury. Taken together, we proposed that PS-NaP and TiO2 NPs co-exposed activated the Keap-1, then inhibited the recognition of Nrf2 and ARE, consequently exacerbated liver injury. These findings shed light on the co-toxicity and potential mechanism of nanoplastics and nanoparticles, which informed the risk assessment of human exposure to environmental pollutants.

Vaporization phosphorization-mediated synthesis of phosphorus-doped TiO2 nanocomposites for combined photodynamic and photothermal therapy of renal cell carcinoma

Clear cell renal cell carcinoma (ccRCC) is a disease with high incidence and poor prognosis. The conventional treatment involves radiotherapy and chemotherapy, but chemotherapeutic agents are often associated with side effects, i.e., cytotoxicity to nontumor cells. Therefore, there is an urgent need for the development of novel therapeutic strategies for ccRCC. We synthesized spherical P/TiO2 nanoparticles (P/TiO2 NPs) by vaporization phosphorization (VP). X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS) analyses confirmed that the anatase TiO2 surface was successfully doped with phosphorus and produced a large number of oxygen vacancies (OV). Serving as a photosensitizer, P/TiO2 NPs not only extended the photoresponse range to the near-infrared II region (NIR II) but also introduced a donor energy level lower than the TiO2 conduction band, narrowing the band gap, which could facilitate the migration of photogenerated charges and trigger the synergistic treatment of photodynamic therapy (PDT) and photothermal therapy (PTT). During NIR irradiation in vitro, the P/TiO2 NPs generated local heat and various oxygen radicals, including 1O2, ˙O2-, H2O2, and ˙OH, which damaged the ccRCC cells. In vivo, administration of the P/TiO2 NPs + NIR reduced the tumor volume by 80%, and had the potential to inhibit tumor metastasis by suppressing intratumor neoangiogenesis. The P/TiO2 NPs showed superior safety and efficacy relative to the conventional chemotherapeutic agent used in ccRCC treatment. This study introduced an innovative paradigm for renal cancer treatment, highlighting the potential of P/TiO2 NPs as safe and effective nanomaterials and presenting a compelling new option for clinical applications in anticancer therapy.

Br - nanoconjugate enhances the antibacterial efficacy of nimboloide against Flavobacterium columnare infection in Labeo rohita: A nanoinformatics approach

BACKGROUND

The bacterial pathogen, Flavobacterium columnare causes columnaris disease in Labeo rohita globally. Major effects of this bacterial infection include skin rashes and gill necrosis. Nimbolide, the key ingredient of the leaf extract of Azadirachta indica possesses anti-bacterial properties effective against many microorganisms. Nano-informatics plays a promising role in drug development and its delivery against infections caused by multi-drug-resistant bacteria. Currently, studies in the disciplines of dentistry, food safety, bacteriology, mycology, virology, and parasitology are being conducted to learn more about the wide anti-virulence activity of nimbolide.

METHODS

The toxicity of nimbolide was predicted to determine its dosage for treating bacterial infection in Labeo rohita. Further, comparative 3-D structure prediction and docking studies are done for nimbolide conjugated nanoparticles with several key target receptors to determine better natural ligands against columnaris disease. The nanoparticle conjugates are being designed using in-silico approaches to study molecular docking interactions with the target receptor.

RESULTS

Bromine conjugated nimbolide shows the best molecular interaction with the target receptors of selected species ie L rohita. Nimbolide comes under the class III level of toxic compound so, attempts are made to reduce the dosage of the compound without compromising its efficiency. Further, bromine is also used as a common surfactant and can eliminate heavy metals from wastewater.

CONCLUSION

The dosage of bromine-conjugated nimbolide can be reduced to a non-toxic level and thus the efficiency of the Nimbolide can be increased. Moreover, it can be used to synthesize nanoparticle composites which have potent antibacterial activity towards both gram-positive and gram-negative bacteria. This material also forms a good coating on the surface and kills both airborne and waterborne bacteria.

Synthesis and characterization of marine seagrass (Cymodocea serrulata) mediated titanium dioxide nanoparticles for antibacterial, antibiofilm and antioxidant properties

Cymodocea serrulata mediated titanium dioxide nanoparticles (TiO2 NPs) were successfully synthesized. The XRD pattern and FTIR spectra demonstrated the crystalline structure of TiO2 NPs and the presence of phenols, flavonoids and alkaloids in the extract. Further SEM revealed that TiO2 NPs has uniform structure and spherical in shape with their size ranged from 58 to 117 nm. Antibacterial activity of TiO2 NPs against methicillin-resistant Staphylococcus aureus (MRSA) and Vibrio cholerae (V. cholerae), provided the zone of inhibition of 33.9 ± 1.7 and 36.3 ± 1.9 mm, respectively at 100 μg/mL concentration. MIC of TiO2 NPs against MRSA and V. cholerae showed 84% and 87% inhibition at 180 μg/mL and 160 μg/mL respectively. Subsequently, the sub-MIC of V. cholerae demonstrated minimal or no impact on bacterial growth at concentration of 42.5 μg/mL concentration. In addition, TiO2 NPs exhibited their ability to inhibit the biofilm forming V. cholerae which caused distinct morphological and intercellular damages analysed using CLSM and TEM. The antioxidant properties of TiO2 NPs were demonstrated through TAA and DPPH assays and exposed its scavenging activity with IC50 value of 36.42 and 68.85 μg/mL which denotes its valuable antioxidant properties with potential health benefits. Importantly, the brine shrimp based lethality experiment yielded a low cytotoxic effect with 13% mortality at 100 μg/mL. In conclusion, the multifaceted attributes of C. serrulata mediated TiO2 NPs encompassed the antibacterial, antioxidant and anti-biofilm inhibition effects with low cytotoxicity in nature were highlighted in this study and proved the bioderived TiO2 NPs could be used as a promising agent for biomedical applications.

Microplastics and TiO2 nanoparticles mixture as an emerging threat to amphibians: A case study on bullfrog embryos

Emerging contaminants can act as contributing factors to the decline of amphibian populations worldwide. Recently, scientists have drawn attention to the potential ecotoxicity of microplastics and nanomaterials in amphibians, however, their possible effects on embryonic developmental stages are still absent. Thus, the present study analyzed the developmental toxicity of environmentally relevant concentrations of polyethylene microplastics (PE MPs; 60 mg/L) and titanium dioxide nanoparticles (TiO2 NPs; 10 μg/L), isolated or in combination (Mix group) on bullfrog embryos, Aquarana catesbeiana, adapting the Frog Embryo Teratogenesis Assay (FETAX, 96h). Allied to the FETAX protocol, we also analyzed the heart rate and morphometric data. The exposure reduced the survival and hatching rates in groups exposed to TiO2 NPs, and to a lesser extent, also affected the Mix group. TiO2 NPs possibly interacted with the hatching enzymes of the embryos, preventing hatching, and reducing their survival. The reduced effects in the Mix group are due to the agglomeration of both toxicants, making the NPs less available for the embryos. PE MPs got attached to the gelatinous capsule of the chorion (confirmed by fluorescence microscopy), which protected the embryos from eventual direct effects of the microplastics on the hatching and survival rates. Although there were no cardiotoxic effects nor morphometric alterations, there was a significant increase in abdominal edemas in the hatched embryos of the PE MPs group, which indicates that osmoregulation might have been affected by the attachment of the microplastics on the embryos' gelatinous capsule. This study presents the first evidence of developmental toxicity of environmental mixtures of microplastics and nanoparticles on amphibians and reinforces the need for more studies with other amphibian species, especially neotropical specimens that could present bigger sensibility. Our study also highlighted several features of the FETAX protocol as useful tools to evaluate the embryotoxicity of several pollutants on amphibians.

Enhancing the photodynamic effect of curcumin through modification with TiO2 nanoparticles and cationic polymers

Curcumin (CUR), a natural compound extracted from turmeric, has shown potential as a photosensitizer in photodynamic therapy (PDT). The aim of this work was to enhance the efficacy of CUR by modifying it using titanium dioxide (TiO2) nanoparticles and a cationic polymer called Sofast to create a nanocomposite TiO2-CUR-Sofast (TCS). Compared to unmodified CUR, TCS exhibited a broadening toward longer wavelength in the absorption wavelength within the 400-550 nm range, leading to improved CUR absorption. Cellular uptake efficiency of TCS was also enhanced, and it demonstrated nearly 4.7-fold higher reactive oxygen species (ROS) generation than CUR. Furthermore, TCS displayed the ability to attach to the cell membrane and enter cells within a 30-min incubation period. Upon irradiation, TCS exhibited remarkable cytotoxicity, resulting in a significant reduction in the viability of various cancer cells. Autofluorescence lifetime imaging of intracellular reduced nicotinamide adenine dinucleotide (phosphate) (NAD(P)H) and flavin adenine dinucleotide (FAD) enzymes indicated that cancer cells treated with TCS and irradiation undergo a metabolic pathway shift from oxidative phosphorylation to glycolysis. These findings highlight the potential of TCS as an effective PDT agent for cancer treatment.

Multifunctional role of nanoparticles for the diagnosis and therapeutics of cardiovascular diseases

The increasing burden of cardiovascular disease (CVD) remains responsible for morbidity and mortality worldwide; their effective diagnostic or treatment methods are of great interest to researchers. The use of NPs and nanocarriers in cardiology has drawn much interest. The present comprehensive review provides deep insights into the use of current and innovative approaches in CVD diagnostics to offer practical ways to utilize nanotechnological interventions and the critical elements in the CVD diagnosis, associated risk factors, and management strategies of patients with chronic CVDs. We proposed a decision tree-based solution by discussing the emerging applications of NPs for the higher number of rules to increase efficiency in treating CVDs. This review-based study explores the screening methods, tests, and toxicity to provide a unique way of creating a multi-parametric feature that includes cutting-edge techniques for identifying cardiovascular problems and their treatments. We discussed the benefits and drawbacks of various NPs in the context of cost, space, time and complexity that have been previously suggested in the literature for the diagnosis of CVDs risk factors. Also, we highlighted the advances in using NPs for targeted and improved drug delivery and discussed the evolution toward the nano-cardiovascular potential for medical science. Finally, we also examined the mixed-based diagnostic approaches crucial for treating cardiovascular disorders, broad applications and the potential future applications of nanotechnology in medical sciences.

The interaction between titanium dioxide nanoparticles and light can have dualistic effects on the physiological responses of plants

The model plant Arabidopsis thaliana was exposed to combined stress factors, i.e., titanium dioxide nanoparticles (TiNPs) and high light. The concentrations of TiNPs used for irrigation were 250, 500, and 1000 μg/mL. This study shows that TiNPs alter the morphology and nanomechanical properties of chloroplasts in A. thaliana, which leads to a decrease in membrane elasticity. We found that TiNPs contributed to a delay in the thermal response of A. thaliana under dynamic light conditions, as revealed by non-invasive thermal imaging. The thermal time constants of TiNP-treated plants under excessive light are determined, showing a shortening in comparison to control plants. The results indicate that TiNPs may contribute to an alleviation of temperature stress experienced by plants under exposure to high light. In this research, we observed a decline in photosystem II photochemical efficiency accompanied by an increase in energy dissipation upon exposure to TiNPs. Interestingly, concentrations exceeding 250 µg/mL TiNPs appeared to mitigate the effects of high light, as shown by reduced differences in the values of specific OJIP parameters (FV/FM, ABS/RC, DI0/RC, and Pi_Abs) before and after light exposure.

On-Chip Modification of Titanium Electrothermal Characteristics by Joule Heating: Application to Terahertz Microbolometer

This study demonstrates the conversion of metallic titanium (Ti) to titanium oxide just by conducting electrical current through Ti thin film in vacuum and increasing the temperature by Joule heating. This led to the improvement of electrical and thermal properties of a microbolometer. A microbolometer with an integrated Ti thermistor and heater width of 2.7 µm and a length of 50 µm was fabricated for the current study. Constant-voltage stresses were applied to the thermistor wire to observe the effect of the Joule heating on its properties. Thermistor resistance ~14 times the initial resistance was observed owing to the heating. A negative large temperature coefficient of resistance (TCR) of -0.32%/K was also observed owing to the treatment, leading to an improved responsivity of ~4.5 times from devices with untreated Ti thermistors. However, this does not improve the noise equivalent power (NEP), due to the increased flicker noise. Microstructural analyses with transmission electron microscopy (TEM), transmission electron diffraction (TED) and energy dispersive X-ray (EDX) confirm the formation of a titanium oxide (TiOx) semiconducting phase on the Ti phase (~85% purity) deposited initially, further to the heating. Formation of TiOx during annealing could minimize the narrow width effect, which we reported previously in thin metal wires, leading to enhancement of responsivity.

Spotlight on therapeutic efficiency of green synthesis metals and their oxide nanoparticles in periodontitis

Periodontitis, one of the most prevalent dental diseases, causes the loss of bone and gum tissue that hold teeth in place. Several bacteria, commonly present in clinically healthy oral cavities, may induce and perpetuate periodontitis when their concentration rises in the gingival sulcus. Antibacterial effect against various Gram-negative and Gram-positive bacteria, including pathogenic and drug-resistant ones, has been shown for several distinct transient metal and metal oxide NPs. Therefore, NPs may be used in biomedicine to treat periodontal problems and in nanotechnology to inhibit the development of microorganisms. Instead of using harmful chemicals or energy-intensive machinery, biosynthesis of metal and metal oxide nanoparticles (NPs) has been suggested. To produce metal and metal oxide NPs, the ideal technique is "Green" synthesis because of its low toxicity and safety for human health and the environment. Gold NPs (AuNPs) appear to be less toxic to mammalian cells than other nanometals because their antibacterial activity is not dependent on reactive oxygen species (ROS). AgNPs also possess chemical stability, catalytic activity, and superior electrical and thermal conductivity, to name a few of their other advantageous characteristics. It was observed that zinc oxide (ZnO) NPs and copper (Cu) NPs exhibited discernible inhibitory effects against gram-positive and gram-negative bacterial strains, respectively. ZnO NPs demonstrated bactericidal activity against the microorganisms responsible for periodontitis. Medications containing magnetic NPs are highly effective against multidrug-resistant bacterial and fungal infections. The titanium dioxide (TiO2) NPs are implicated in elevating salivary peroxidase activity in individuals diagnosed with chronic periodontitis. Furthermore, specific metallic NPs have the potential to enhance the antimicrobial efficacy of periodontitis treatments when combined. Therefore, these NPs, as well as their oxide NPs, are only some of the metals and metal oxides that have been synthesized in environmentally friendly ways and shown to have therapeutic benefits against periodontitis.

Metal-based nanoparticles in cancer therapy: Exploring photodynamic therapy and its interplay with regulated cell death pathways

Photodynamic therapy (PDT) represents a non-invasive treatment strategy currently utilized in the clinical management of selected cancers and infections. This technique is predicated on the administration of a photosensitizer (PS) and subsequent irradiation with light of specific wavelengths, thereby generating reactive oxygen species (ROS) within targeted cells. The cellular effects of PDT are dependent on both the localization of the PS and the severity of ROS challenge, potentially leading to the stimulation of various cell death modalities. For many years, the concept of regulated cell death (RCD) triggered by photodynamic reactions predominantly encompassed apoptosis, necrosis, and autophagy. However, in recent decades, further explorations have unveiled additional cell death modalities, such as necroptosis, ferroptosis, cuproptosis, pyroptosis, parthanatos, and immunogenic cell death (ICD), which helps to achieve tumor cell elimination. Recently, nanoparticles (NPs) have demonstrated substantial advantages over traditional PSs and become important components of PDT, due to their improved physicochemical properties, such as enhanced solubility and superior specificity for targeted cells. This review aims to summarize recent advancements in the applications of different metal-based NPs as PSs or delivery systems for optimized PDT in cancer treatment. Furthermore, it mechanistically highlights the contribution of RCD pathways during PDT with metal NPs and how these forms of cell death can improve specific PDT regimens in cancer therapy.

Bacterial nano-factories as a tool for the biosynthesis of TiO2 nanoparticles: characterization and potential application in wastewater treatment

The development of reliable and eco-conscious processes for nanoparticle synthesis constitutes a significant element in nanotechnology. TiO2 nanoparticles (NPs) are becoming essential due to their potential uses in dentistry, surgery, agriculture, and pharmacy. This leads to the development of various procedures for producing TiO2 NPs using various physicochemical methods. Still, the drawbacks of these conventional methods are associated with the emission of toxic chemicals into the atmosphere and high energy demands in production, hence endangering the health and the environment. Problems issued are solved by green nanotechnology, which offers tools as nano-factories by utilizing biological sources to subside the improper effects of conventional methods and produces nanoparticles through synthesis methods that are clean, safe, energy-efficient, and cost-effective. Among the biogenic sources, microbial cells such as bacteria possess intrinsic pathways of converting metallic salt to nanoparticles due to their ability to produce reductase enzymes. Also, they can offer features to products such as high dispersity and produce sustainable nanoparticles at a large scale. Biosynthesized TiO2 NPs have high oxidizing potential and a wide range of applications, specifically as photosensitizers and antimicrobial agents. This review will address bacterial nano-factories that can be utilized for the biosynthesis of TiO2 NPs, the characterization of biosynthesized nanoparticles, and their potential application in wastewater treatment.

8-Bromo-cAMP attenuates human airway epithelial barrier disruption caused by titanium dioxide fine and nanoparticles

Titanium dioxide fine particles (TiO2-FPs) and nanoparticles (TiO2-NPs) are the most widely used whitening pigments worldwide. Inhalation of TiO2-FPs and TiO2-NPs can be harmful as it triggers toxicity in the airway epithelial cells. The airway epithelium serves as the respiratory system's first line of defense in which airway epithelial cells are significant targets of inhaled pathogens and environmental particles. Our group previously found that TiO2-NPs lead to a disrupted barrier in the polarized airway epithelial cells. However, the effect of TiO2-FPs on the respiratory epithelial barrier has not been examined closely. In this study, we aimed to compare the effects of TiO2-FPs and TiO2-NPs on the structure and function of the airway epithelial barrier. Additionally, we hypothesized that 8-Bromo-cAMP, a cyclic adenosine monophosphate (cAMP) derivative, would alleviate the disruptive effects of both TiO2-FPs and TiO2-NPs. We observed increased epithelial membrane permeability in both TiO2-FPs and TiO2-NPs after exposure to 16HBE cells. Immunofluorescent labeling showed that both particle sizes disrupted the structural integrity of airway epithelial tight junctions and adherens junctions. TiO2-FPs had a slightly more, but insignificant impact on the epithelial barrier disruption than TiO2-NPs. Treatment with 8-Bromo-cAMP significantly attenuated the barrier-disrupting impact of both TiO2-FPs and TiO2-NPs on cell monolayers. Our study demonstrates that both TiO2-FPs and TiO2-NPs cause comparable barrier disruption and suggests a protective role for cAMP signaling. The observed effects of TiO2-FPs and TiO2-NPs provide a necessary understanding for characterizing the pathways involved in the defensive role of the cAMP pathway on TiO2-induced airway barrier disruption.

Biogenic synthesis of dopamine/carboxymethyl cellulose/TiO2 nanoparticles using Psidium guajava leaf extract with enhanced antimicrobial and anticancer activities

The green synthesis of metal oxide nanoparticles (NPs) has garnered considerable attention from researchers due to its utilization of eco-friendly solvents during synthesis and cost-effective approaches. This study focuses on the synthesis of titanium oxide (TiO2) and dopamine (DA) carboxymethyl cellulose (CMC)-doped TiO2 (DA/CMC/TiO2) NP using Psidium guajava leaf extract, while also investigating the structural, optical, and morphological and biocidal potential of the prepared NPs. Significantly larger zones of inhibition were observed for DA/CMC/TiO2 NPs compared to TiO2 against various pathogens. Moreover, the MTT assay was carried out to evaluate the anticancer activity of the prepared samples against MG-63 cells, and the results revealed that DA/CMC/TiO2 NPs exhibited significantly higher level of anticancer activity compared to TiO2. The experimental results demonstrated that DA/CMC/TiO2 NPs exhibited enhanced anticancer activity in a dose-dependent manner when compared to TiO2 NPs.

Flexible multifunctional titania nanotube array platform for biological interfacing

Abstract

The current work presents a novel flexible multifunctional platform for biological interface applications. The use of titania nanotube arrays (TNAs) as a multifunctional material is explored for soft-tissue interface applications. In vitro biocompatibility of TNAs to brain-derived cells was first examined by culturing microglia cells-the resident immune cells of the central nervous system on the surface of TNAs. The release profile of an anti-inflammatory drug, dexamethasone from TNAs-on-polyimide substrates, was then evaluated under different bending modes. Flexible TNAs-on-polyimide sustained a linear release of anti-inflammatory dexamethasone up to ~11 days under different bending conditions. Finally, microfabrication processes for patterning and transferring TNA microsegments were developed to facilitate structural stability during device flexing and to expand the set of compatible polymer substrates. The techniques developed in this study can be applied to integrate TNAs or other similar nanoporous inorganic films onto various polymer substrates.

Impact statement

Titania nanotube arrays (TNAs) are highly tunable and biocompatible structures that lend themselves to multifunctional implementation in implanted devices. A particularly important aspect of titania nanotubes is their ability to serve as nano-reservoirs for drugs or other therapeutic agents that slowly release after implantation. To date, TNAs have been used to promote integration with rigid, dense tissues for dental and orthopedic applications. This work aims to expand the implant applications that can benefit from TNAs by integrating them onto soft polymer substrates, thereby promoting compatibility with soft tissues. The successful direct growth and integration of TNAs on polymer substrates mark a critical step toward developing mechanically compliant implantable systems with drug delivery from nanostructured inorganic functional materials. Diffusion-driven release kinetics and the high drug-loading efficiency of TNAs offer tremendous potential for sustained drug delivery for scientific investigations, to treat injury and disease, and to promote device integration with biological tissues. This work opens new opportunities for developing novel and more effective implanted devices that can significantly improve patient outcomes and quality of life.

Graphical abstract

Supplementary information

The online version contains supplementary material available at 10.1557/s43577-023-00628-y.

Enhancing Visible-Light Photocatalysis with Pd(II) Porphyrin-Based TiO2 Hybrid Nanomaterials: Preparation, Characterization, ROS Generation, and Photocatalytic Activity

Novel hybrid TiO2-based materials were obtained by adsorption of two different porphyrins on the surface of nanoparticles-commercially available 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS) and properly modified metalloporphyrin-5,10,15,20-tetrakis(2,6-difluoro-3-sulfophenyl)porphyrin palladium(II) (PdF2POH). The immobilization of porphyrins on the surface of TiO2 was possible due to the presence of sulfonyl groups. To further elevate the adsorption of porphyrin, an anchoring linker-4-hydroxybenzoic acid (PHBA)-was used. The synthesis of hybrid materials was proven by electronic absorption spectroscopy, dynamic light scattering (DLS), and photoelectrochemistry. Results prove the successful photosensitization of TiO2 to visible light by both porphyrins. However, the presence of the palladium ion in the modifier structure played a key role in strong adsorption, enhanced charge separation, and thus effective photosensitization. The incorporation of halogenated metalloporphyrins into TiO2 facilitates the enhancement of the comprehensive characteristics of the investigated materials and enables the evaluation of their performance under visible light. The effectiveness of reactive oxygen species (ROS) generation was also determined. Porphyrin-based materials with the addition of PHBA seemed to generate ROS more effectively than other composites. Interestingly, modifications influenced the generation of singlet oxygen for TPPS but not hydroxyl radical, in contrast to PdF2POH, where singlet oxygen generation was not influenced but hydroxyl radical generation was increased. Palladium (II) porphyrin-modified materials were characterized by higher photostability than TPPS-based nanostructures, as TPPS@PHBA-P25 materials showed the highest singlet oxygen generation and may be oxidized during light exposure. Photocatalytic activity tests with two model pollutants-methylene blue (MB) and the opioid drug tramadol (TRML)-confirmed the light dose-dependent degradation of those two compounds, especially PdF2POH@P25, which led to the virtually complete degradation of MB.

Metal nanoparticles as a potential technique for the diagnosis and treatment of gastrointestinal cancer: a comprehensive review

Gastrointestinal (GI) cancer is a major health problem worldwide, and current diagnostic and therapeutic approaches are often inadequate. Various metallic nanoparticles (MNPs) have been widely studied for several biomedical applications, including cancer. They may potentially overcome the challenges associated with conventional chemotherapy and significantly impact the overall survival of GI cancer patients. Functionalized MNPs with targeted ligands provide more efficient localization of tumor energy deposition, better solubility and stability, and specific targeting properties. In addition to enhanced therapeutic efficacy, MNPs are also a diagnostic tool for molecular imaging of malignant lesions, enabling non-invasive imaging or detection of tumor-specific or tumor-associated antigens. MNP-based therapeutic systems enable simultaneous stability and solubility of encapsulated drugs and regulate the delivery of therapeutic agents directly to tumor cells, which improves therapeutic efficacy and minimizes drug toxicity and leakage into normal cells. However, metal nanoparticles have been shown to have a cytotoxic effect on cells in vitro. This can be a concern when using metal nanoparticles for cancer treatment, as they may also kill healthy cells in addition to cancer cells. In this review, we provide an overview of the current state of the field, including preparation methods of MNPs, clinical applications, and advances in their use in targeted GI cancer therapy, as well as the advantages and limitations of using metal nanoparticles for the diagnosis and treatment of gastrointestinal cancer such as potential toxicity. We also discuss potential future directions and areas for further research, including the development of novel MNP-based approaches and the optimization of existing approaches.

Partial Hydrolysis of Diphosphonate Ester During the Formation of Hybrid TiO2 Nanoparticles: Role of Acid Concentration

The hydrolysis of the phosphonate ester linker during the synthesis of hybrid (organic-inorganic) TiO2 nanoparticles is important when forming porous hybrid organic-inorganic metal phosphonates. In the present work, a method was utilized to control the in-situ partial hydrolysis of diphosphonate ester in the presence of a titania precursor as a function of acid content, and its impact on the hybrid nanoparticles was assessed. Organodiphosphonate esters, and more specific, their hydrolysis degree during the formation of hybrid organic-inorganic metal oxide nanoparticles, are relatively under explored as linkers. Here, a detailed analysis on the hydrolysis of tetraethyl propylene diphosphonate ester (TEPD) as diphosphonate linker to produce hybrid TiO2 nanoparticles is discussed as a function of acid content. Quantitative solution NMR spectroscopy revealed that during the synthesis of TiO2 nanoparticles, an increase in acid concentration introduces a higher degree of partial hydrolysis of the TEPD linker into diverse acid/ester derivatives of TEPD. Increasing the HCl/Ti ratio from 1 to 3, resulted in an increase in degree of partial hydrolysis of the TEPD linker in solution from 4 % to 18.8 % under the applied conditions. As a result of the difference in partial hydrolysis, the linker-TiO2 bonding was altered. Upon subsequent drying of the colloidal TiO2 solution, different textures, at nanoscale and macroscopic scale, were obtained dependent on the HCl/Ti ratio and thus the degree of hydrolysis of TEPD. Understanding such linker-TiO2 nanoparticle surface dynamics is crucial for making hybrid organic-inorganic materials (i. e. (porous) metal phosphonates) employed in applications such as electronic/photonic devices, separation technology and heterogeneous catalysis.

Nanomaterials Solutions for Contraception: Concerns, Advances, and Prospects

Preventing unintentional pregnancy is one of the goals of a global public health policy to minimize effects on individuals, families, and society. Various contraceptive formulations with high effectiveness and acceptance, including intrauterine devices, hormonal patches for females, and condoms and vasectomy for males, have been developed and adopted over the last decades. However, distinct breakthroughs of contraceptive techniques have not yet been achieved, while the associated long-term adverse effects are insurmountable, such as endocrine system disorder along with hormone administration, invasive ligation, and slowly restored fertility after removal of intrauterine devices. Spurred by developments of nanomaterials and bionanotechnologies, advanced contraceptives could be fulfilled via nanomaterial solutions with much safer and more controllable and effective approaches to meet various and specific needs for women and men at different reproductive stages. Nanomedicine techniques have been extended to develop contraceptive methods, such as the targeted drug delivery and controlled release of hormone using nanocarriers for females and physical stimulation assisted vasectomy using functional nanomaterials via photothermal treatment or magnetic hyperthermia for males. Nanomaterial solutions for advanced contraceptives offer significantly improved biosafety, noninvasive administration, and controllable reversibility. This review summarizes the nanomaterial solutions to female and male contraceptives including the working mechanisms, clinical concerns, and their merits and demerits. This work also reviewed the nanomaterials that have been adopted in contraceptive applications. In addition, we further discuss safety considerations and future perspectives of nanomaterials in nanostrategy development for next-generation contraceptives. We expect that nanomaterials would potentially replace conventional materials for contraception in the near future.

The synergistic effect of titanium dioxide nanoparticles and yeast isolated from fermented foods in reduction of aflatoxin B1

The presence of aflatoxins in food products can lead to health risks in human societies. Therefore, in the present study, the effect of yeast strains isolated from fermented products and titanium dioxide nanoparticles (TiO2-NPs) was studied on aflatoxin reduction. Yeast strains were isolated from fermented products such as sweet fruits and dairy products and identified using biochemical, ascospore (testing by culture medium optimization V8 which is called V8NLF), and molecular methods. The probiotic activity of four selected yeasts was evaluated. Then, the effect of selected yeast isolates and TiO2-NPs on reducing aflatoxin B1 (AFB1) in the medium was studied by measuring AFB1 using ELISA and HPLC. The results of biochemical and molecular identification experiments indicate that the selected strain (Y1) is Saccharomyces cerevisiae. The selected strains showed good tolerance to different concentrations of bile salt, pH, and NaCl, indicating appropriate probiotic activity. It also showed antimicrobial activity against Escherichia coli, Shigella dysenteriae, and Salmonella typhimurium. Selected strain and TiO2-NPs showed AFB1 reducing activity in the medium and when combined, showed synergistic effects in reducing AFB1. TiO2-NPs in combination with selected yeast strains have a high ability to remove AFB1 from the medium and, therefore, can be used for future studies.

Autophagy regulation by inorganic, organic, and organic/inorganic hybrid nanoparticles: Organelle damage, regulation factors, and potential pathways

The rapid development of nanotechnology requires a more thorough understanding of the potential health effects caused by nanoparticles (NPs). As a programmed cell death, autophagy is one of the biological effects induced by NPs, which maintain intracellular homeostasis by degrading damaged organelles and removing aggregates of defective proteins through lysosomes. Currently, autophagy has been shown to be associated with the development of several diseases. A significant number of research have demonstrated that most NPs can regulate autophagy, and their regulation of autophagy is divided into induction and blockade. Studying the autophagy regulation by NPs will facilitate a more comprehensive understanding of the toxicity of NPs. In this review, we will illustrate the effects of different types of NPs on autophagy, including inorganic NPs, organic NPs, and organic/inorganic hybrid NPs. The potential mechanisms by which NPs regulate autophagy are highlighted, including organelle damage, oxidative stress, inducible factors, and multiple signaling pathways. In addition, we list the factors influencing NPs-regulated autophagy. This review may provide basic information for the safety assessment of NPs.

Tribotronic and electrochemical properties of platinum-nanofluid interfaces formed by aqueous suspensions of 5 and 40 nm TiO2 nanoparticles

Nanoparticles (NPs) can be highly beneficial as additives to lubricating fluids, and the tribotronic response of charged NPs tuned by external fields represents an area of great technological potential. Tribotronic response, however, is expected to be highly size dependent, which represents a significant design challenge. To explore this issue, quartz crystal microbalance and cyclic voltammetry were employed to characterize nanotribological and electrochemical behavior of platinum-nanofluid interfaces formed by aqueous suspensions of different-sized negatively charged titanium dioxide (TiO2) NPs. Suspensions of 5, 40, and 100 nm NPs were all observed to reduced interfacial frictional drag forces upon introduction into pure water in zero field conditions, with reductions for the 40 nm NPs about twice those of 5 nm particles at comparable concentrations. Suspensions of 100 nm NPs produced even greater reductions, but rapidly precipitated from the suspension when left unstirred. NPs were also driven to and from Pt electrode surfaces by applying external electric fields with varying amplitudes and modulation frequencies. For electric fields of sufficient amplitude and duration, the 40 nm TiO2 nanosuspension exhibited tribological properties consistent with a reversible electrophoretic deposition of the NPs, accompanied by changes in the electrochemical attributes and increasing interfacial drag. The 5 nm NP properties were consistent with progressive reductions in interfacial drag forces at the NP-suspension interface linked to field-induced increases in concentration.

Interaction of biomolecules with anatase, rutile and amorphous TiO2 surfaces: A molecular dynamics study

The adhesion of biomolecules to dental and orthopedic implants is a fundamental step in the process of osseointegration. Short peptide motifs, such as RGD or KRSR, carried by extracellular matrix proteins or coated onto implant surfaces, accelerate cell adhesion and tissue formation. For this reason, understanding the binding mechanisms of adhesive peptides to oxidized surfaces of titanium implants is of paramount importance. We performed molecular dynamics simulations to compare the adhesion properties of 6 peptides, including the tripeptide RGD, its variants KGD and LGD, as well as the tetrapeptide KRSR, its variant LRSR and its truncated version RSR, on anatase, rutile, and amorphous titanium dioxide (TiO2) surfaces. The migration of these molecules from the water phase to the surface was simulated in an aqueous environment. Based on these simulations, we calculated the residence time of each peptide bound to the three different TiO2 structures. It was found that the presence of an N-terminal lysine or arginine amino acid residue resulted in more efficient surface binding. A pulling simulation was performed to detach the adhered molecules. The maximum pulling force and the binding energy were determined from the results of these simulations. The tri- and tetrapeptides had slightly greater adhesion affinity to the amorphous and anatase structure than to rutile in general, however specific surface and peptide binding characters could be detected. The binding energies obtained from our simulations allowed us to rank the adhesion strengths of the studied peptides.

Nonlinear effects in optical trapping of titanium dioxide and diamond nanoparticles

Optical trapping in biophysics typically uses micron-scale beads made of materials like polystyrene or glass to probe the target of interest. Using smaller beads made of higher-index materials could increase the time resolution of these measurements. We characterized the trapping of nanoscale beads made of diamond and titanium dioxide (TiO2) in a single-beam gradient trap. Calculating theoretical expectations for the trapping stiffness of these beads, we found good agreement with measured values. Trap stiffness was significantly higher for TiO2 beads, owing to notable enhancement from nonlinear optical effects, not previously observed for continuous-wave trapping. Trap stiffness was over 6-fold higher for TiO2 beads than polystyrene beads of similar size at 70 mW laser power. These results suggest that diamond and TiO2 nanobeads can be used to improve time resolution in optical tweezers measurements.

Recent trends and perspectives in the application of metal and metal oxide nanomaterials for sustainable agriculture

Sustainable ecosystem management leads to the use of eco-friendly agricultural techniques for crop production. One of them is the use of metal and metal oxide nanomaterials and nanoparticles, which have proven to be a valuable option for the improvement of agricultural food systems. Moreover, the biological synthesis of these nanoparticles, from plants, bacteria, and fungi, also contributes to their eco-friendly and sustainable characteristics. Nanoparticles, which vary in size from 1 to 100 nm have a variety of mechanisms that are safer and more efficient than conventional fertilizers. Their usage as fertilizers and insecticides in agriculture is gaining favor in the scientific community to maximize crop output. More studies in this field will increase our understanding of this new technology and its broad acceptance in terms of performance, affordability, and environmental protection, as certain nanoparticles may outperform conventional fertilizers and insecticides. Accordingly, to the information gathered in this review, nanoparticles show remarkable potential for enhancing crop production, improving soil quality, and protecting the environment, however, metal and metal oxide NPs are not widely employed in agriculture. Many features of nanoparticles are yet left over, and it is necessary to uncover them. In this sense, this review article provides an overview of various types of metal and metal oxide nanoparticles used in agriculture, their characterization and synthesis, the recent research on them, and their possible application for the improvement of crop productivity in a sustainable manner.

Chitosan-encapsulated nickel oxide, tin dioxide, and farnesol nanoparticles: Antimicrobial and anticancer properties in breast cancer cells

Breast cancer is the most frequent cancer in women; however, it is curable in most cases (up to 80 %) when detected and treated at an early non-metastatic stage. Nanotechnology has led to the development of potential chemotherapeutic techniques, particularly for tumor treatment. Nanotechnology has therapeutic and pharmaceutical applications. Chitosan, a natural polymer derived from chitin, has been extensively studied for its potential applications in a wide range of fields. This includes medicine for its anticancer properties. In the present study, Chitosan-encapsulated-NiO-TiO2-Farnesol hybrid nanomaterials (CNTF HNMs) were synthesized and characterized using several techniques, including electron microscopy (TEM, FE-SEM), spectroscopy (UV-visible [UV-Vis], Fourier Transform Infrared [FT-IR] spectroscopy, and photoluminescence [PL]), energy-dispersive X-ray spectroscopy (EDX) composition analysis, X-ray diffraction, and dynamic light scattering (DLS) analyses. With an estimated average crystallite size of 34.8 nm, the face-cantered cubic crystalline structure of the CNTF HNMs is identified. Cell viability assay by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide), DAPI (4',6-diamidino-2-phenylindole) staining, dual AO/EtBr (Acridine Orange/ Ethidium bromide), JC-1 (5,5,6,6'-tetrachloro-1,1',3,3' tetraethylbenzimi-dazoylcarbocyanine iodide), DCFH-DA (Dichloro-dihydro-fluorescein diacetate), Annexin V-FITC (Fluorescein isothiocyanate) /PI (Propidium Iodide), and cell cycle study was used to assess the ability of nanoparticles (NPs) to kill MDA-MB-231 cells. The CNTF HNMs had high antibacterial effectiveness against multi-drug resistant extended-spectrum beta-lactamases (ESBL)-producing gram-negative bacterial pathogens and reference strains. The findings suggest that NPs increased the number of reactive oxygen species (ROS), changed the Δψm, and initiated apoptosis. There is enormous potential for CNTF HNMs as both antibacterial and anticancer agents.

A comprehensive review on potential applications of metallic nanoparticles as antifungal therapies to combat human fungal diseases

Human pathogenic fungi are responsible for causing a range of infection types including mucosal, skin, and invasive infections. Life-threatening and invasive fungal infections (FIs) are responsible for mortality and morbidity, especially for individuals with compromised immune function. The number of currently available therapeutic agents against invasive FIs is limited compared to that against bacterial infections. In addition, the increased mortality and morbidity caused by FIs are linked to the limited number of available antifungal agents, antifungal resistance, and the increased toxicity of these agents. Currently available antifungal agents have several drawbacks in efficiency, efficacy, toxicity, activity spectrum, and selectivity. It has already been demonstrated with numerous metallic nanoparticles (MNPs) that these nanoparticles can serve as an effective and alternative solution as fungicidal agents. MNPs have great potential owing to their intrinsic antifungal properties and potential to deliver antifungal drugs. For instance, gold nanoparticles (AuNPs) have the capacity to disturb mitochondrial calcium homeostasis induced AuNP-mediated cell death in Candida albicans. In addition, both copper nanoparticles and copper oxide nanoparticles exerted significant suppressive properties against pathogenic fungi. Silver nanoparticles showed strong antifungal properties against numerous pathogenic fungi, such as Stachybotrys chartarum, Mortierella alpina, Chaetomium globosum, A. fumigatus, Cladosporium cladosporioides, Penicillium brevicompactum, Trichophyton rubrum, C. tropicalis, and C. albicans. Iron oxide nanoparticles showed potent antifungal activities against A. niger and P. chrysogenum. It has also been reported that zinc oxide nanoparticles can significantly inhibit fungal growth. These NPs have already exerted potent antifungal properties against a number of pathogenic fungal species including Candida, Aspergillus, Fusarium, and many others. Several strategies are currently used for the research and development of antifungal NPs including chemical modification of NPs and combination with the available drugs. This review has comprehensively presented the current and innovative antifungal approach using MNPs. Moreover, different types of MNPs, their physicochemical characteristics, and production techniques have been summarized in this review.

Recent advances in metal nanoparticles to treat periodontitis

The gradual deterioration of the supporting periodontal tissues caused by periodontitis, a chronic multifactorial inflammatory disease, is thought to be triggered by the colonization of dysbiotic plaque biofilms in a vulnerable host. One of the most prevalent dental conditions in the world, periodontitis is now the leading factor in adult tooth loss. When periodontitis does develop, it is treated by scraping the mineralized deposits and dental biofilm off the tooth surfaces. Numerous studies have shown that non-surgical treatment significantly improves clinical and microbiological indices in individuals with periodontitis. Although periodontal parameters have significantly improved, certain bacterial reservoirs often persist on root surfaces even after standard periodontal therapy. Periodontitis has been treated with local or systemic antibiotics as well as scaling and root planning. Since there aren't many brand-new antibiotics on the market, several researchers are currently concentrating on creating alternate methods of combating periodontal germs. There is a delay in a study on the subject of nanoparticle (NP) toxicity, which is especially concerned with mechanisms of action, while the area of nanomedicine develops. The most promising of them are metal NPs since they have potent antibacterial action. Metal NPs may be employed as efficient growth inhibitors in a variety of bacteria, making them useful for the treatment of periodontitis. In this way, the new metal NPs contributed significantly to the development of efficient anti-inflammatory and antibacterial platforms for the treatment of periodontitis. The current therapeutic effects of several metallic NPs on periodontitis are summarized in this study. This data might be used to develop NP-based therapeutic alternatives for the treatment of periodontal infections.

Adverse effects of titanium dioxide nanoparticles on beneficial gut bacteria and host health based on untargeted metabolomics analysis

Titanium dioxide (TiO2) is a common additive in foods, medicines, and personal care products. In recent years, nano-scale particles in TiO2 additives have been an increasing concern due to their potential adverse effects on human health, especially gut health. The objective of this study was to determine the impact of titanium dioxide nanoparticles (TiO2 NPs, 30 nm) on beneficial gut bacteria and host response from a metabolomics perspective. In the in vitro study, four bacterial strains, including Lactobacillus reuteri, Lactobacillus gasseri, Bifidobacterium animalis, and Bifidobacterium longum were subjected to the treatment of TiO2 NPs. The growth kinetics, cell viability, cell membrane permeability, and metabolomics response were determined. TiO2 NPs at the concentration of 200 μg/mL showed inhibitory effects on the growth of all four strains. The confocal microscope results indicated that the growth inhibitory effects could be associated with cell membrane damage caused by TiO2 NPs to the bacterial strains. Metabolomics analysis showed that TiO2 NPs caused alterations in multiple metabolic pathways of gut bacteria, such as tryptophan and arginine metabolism, which were demonstrated to play crucial roles in regulating gut and host health. In the in vivo study, mice were fed with TiO2 NPs (0.1 wt% in diet) for 8 weeks. Mouse urine was collected for metabolomics analysis and the tryptophan metabolism pathway was also significantly affected in TiO2 NPs-fed mice. Moreover, four neuroprotective metabolites were significantly reduced in both in vitro bacteria and in vivo urine samples. Overall, this study provides insights into the potential adverse effects of TiO2 NPs on gut bacteria and the metabolic responses of both bacteria and host. Further research is needed to understand the causality between gut bacteria composition and the metabolism pathway, which is critical to monitor the gut-microbiome mediated metabolome changes in toxicological assessment of food components.

Darcy Forchheimer flow of CMC-water based hybrid nanofluid due to a rotating stretchable disk

The flow of fluid over a spinning disk has a broad scope of numerous applications. It is employed in various things, including medical equipment, the braking system of cars, gas turbines, plastic films, and glass production. As a result of these applications, we considered the phenomena of Darcy Forchheimer's three-dimensional flow on TiO2-Fe3O4 nanoparticles suspended in based CMC-water fluid. The influence of thermal radiation and convective conditions is studied. Moreover, the Buongiorno model is utilized to compute the Brownian motion and the thermophoretic effect. To generate the non-dimensionalized governing equations, suitable alterations are put into use. These equations are then utilized with Matlab BVP4c. Graphs are used to analyze the behavior of velocity distributions, and thermal and concentration profiles at different parameter values. In addition, the solutions to the flow problem have been analyzed in terms of several other physical variables on velocity, temperature, concentration, drag force, heat, and mass transfer. According to the findings, it is clear that an escalates in the value of the rotation parameter leads to an increase in the radial velocity and axial velocity. In contrast, an opposite pattern is followed in the Forchheimer number. Finally, some engineering quantities are evaluated numerically and presented in tabular forms.

Mechanistic study of the increased phototoxicity of titanium dioxide nanoparticles to Chlorella vulgaris in the presence of NOM eco-corona

Widespread applications and release of photoactive nanoparticles (NPs) such as titanium dioxide (TiO₂) into environmental matrices warrant mechanistic investigations addressing toxicity of NPs under environmentally relevant conditions. Accordingly, we investigated the effects of surface adsorbed natural organic matters (NOMs) such as humic acid, tannic acid and lignin on the band gap energy, abiotic reactive oxygen species (ROS) generation, surface chemistry and phototoxicity of TiO₂ NPs. Initially, a liquid assisted grinding method was optimized to produce TiO₂ NPs with a NOM layer of defined thickness for further analysis. Generally, adsorption of NOM reduced the band-gap energy of TiO₂ NPs from 3.08 eV to 0.56 eV with humic acid, 1.92 eV with tannic acid and 2.48 eV with lignin. Light activated ROS generation by TiO₂ NPs such as hydroxyl radicals, however, was reduced by 4, 2, 9 times in those coated with humic acid, tannic acid and lignin, respectively. This reduction in ROS despite decrease in band gap energy corroborated with the decreased surface oxygen vacancy (as revealed by X-ray Photoelectron Spectroscopy (XPS)) and quenching of ROS by surface adsorbed NOM. Despite the reduced ROS generation, the NOM-modified TiO₂ NPs exhibited an increased phototoxicity to Chlorella vulgaris in comparison to pristine TiO₂ NPs. Further analysis suggested that photoactivation of NOM modified TiO₂ NPs releases toxic degradation products. Findings from our studies thus provide mechanistic insight into the ecotoxic potential of NOM-modified TiO₂ NPs when exposed to light in the environment.

Assessing the Cytotoxicity of TiO2-x Nanoparticles with a Different Ti3+(Ti2+)/Ti4+ Ratio

Titanium dioxide (TiO₂) nanoparticles are promising biomedical agents characterized by good biocompatibility. In this study, we explored the cytotoxicity of TiO_2-x nanoparticles with a different Ti³⁺(Ti²⁺)/Ti⁴⁺ ratio and analyzed the efficiency of eryptosis indices as a tool in nanotoxicology. Two types of TiO_2-x nanoparticles (NPs) were synthesized by the hydrolysis of titanium alkoxide varying the nitric acid content in the hydrolysis mixture. Transmission electron microscopy (TEM) images show that 1-TiO_2-x and 2-TiO_2-x NPs are 5 nm in size, whereas X-ray photoelectron spectroscopy (XPS) reveals different Ti³⁺ (Ti²⁺)/Ti⁴⁺ ratios in the crystal lattices of synthesized NPs. 1-TiO_2-x nanoparticles contained 54% Ti⁴⁺, 38% Ti³⁺, and 8% Ti²⁺, while the relative amount of Ti⁴⁺ and Ti³⁺ in the crystal lattice of 2-TiO_2-x nanoparticles was 63% and 37%, respectively. Cell viability and cell motility induced by TiO_2-x nanoparticles were investigated on primary fibroblast cultures. Eryptosis modulation by the nanoparticles along with cell death mechanisms was studied on rat erythrocytes. We report that both TiO_2-x nanoparticles do not decrease the viability of fibroblasts simultaneously stimulating cell migration. Data from in vitro studies on erythrocytes indicate that TiO_2-x nanoparticles trigger eryptosis via ROS- (1-TiO_2-x) and Ca²⁺-mediated mechanisms (both TiO_2-x nanoparticles) suggesting that evaluation of eryptosis parameters is a more sensitive nanotoxicological approach for TiO_2-x nanoparticles than cultured fibroblast assays. TiO_2-x nanoparticles are characterized by low toxicity against fibroblasts, but they induce eryptosis, which is shown to be a promising tool for nanotoxicity screening. The Ti³⁺ (Ti²⁺)/Ti⁴⁺ ratio at least partly determines the cytotoxicity mechanisms for TiO_2-x nanoparticles.

Lead Detection in a Gig-Lox TiO2 Sponge by X-ray Reflectivity

The importance of lead analysis in environmental matrices becomes increasingly relevant due to the anthropogenic spread of toxic species in nature. Alongside the existing analytical methods to detect lead in a liquid environment, we propose a new dry approach for lead detection and measurement based on its capture from a liquid solution by a solid sponge and subsequent quantification based on X-ray analyses. The detection method exploits the relationship between the electronic density of the solid sponge, which depends on the captured lead, and the critical angle for total reflection of the X-rays. For this purpose, gig-lox TiO₂ layers, grown by modified sputtering physical deposition, were implemented for their branched multi-porosity spongy structure that is ideal for capturing lead atoms or other metallic ionic species in a liquid environment. The gig-lox TiO₂ layers grown on glass substrates were soaked into aqueous solutions containing different concentrations of Pb, dried after soaking, and finally probed through X-ray reflectivity analyses. It has been found that lead atoms are chemisorbed onto the many available surfaces within the gig-lox TiO₂ sponge by establishing stable oxygen bonding. The infiltration of lead into the structure causes an increase in the overall electronic density of the layer and, thus, an increment of its critical angle. Based on the established linear relationship between the amount of lead adsorbed and the augmented critical angle, a standardized quantitative procedure to detect Pb is proposed. The method can be, in principle, applied to other capturing spongy oxides and toxic species.

A. Ali G. Inhibitory effect of Titanium dioxide (Tio2) nanoparticles and their synergistic activity with antibiotics in some types of bacteria

Titanium dioxide nanoparticles (TiO2 NPs) were studied as antibacterial agents at different concentrations against clinical and environmental bacterial isolates without UV or photocatalytic activation. Five TiO2 NPs concentrations (20µg/ml,50µg/ml, 100µg/ml,500µg/ml and 1000µg/ml) were studied against 15 bacterial species:10 clinical isolates and 5 environmental isolates) compared with antibiotics Amikacin(AK)and Levloxacin(LEV).Only500µg/ml concentration of TiO2 NPs was active against 7 bacterial isolates (3 clinical and 4 environmental), and 1000µg/ml concentration of TiO2 NPs was effective against 9 isolates (6 clinical and 3 environmental ). These concentrations were mixed with the antibiotics Levloxacin LEV and Amikacin AK to investigate the possibility of synergistic activity against studied bacteria. Bacterial isolate's response or sensitivity to the antibiotic and TiO2 NPs mixture was varied; AK plus 500µg/ml TiO2 NPs concentration showed increased inhibitory activity against 7 isolates (3 clinical, 4 environmental) and 1000µg/ml TiO2 NPs mixed with AK showed increased inhibition activity against one environmental bacterial isolates, where Ak mixed with 500 and Ak plus 1000 µg/ml showed the same effect as the antibiotic alone or less.LEV antibiotic shows no difference in the effect on all 9 bacteria (7 clinical and 2 environmental), while LEV mixed with 500 µg/ml have increased inhibition zones on 4 bacteria (2 clinical, 2 environmental) , and LEV mixed with 1000µg/ml have higher effect than the antibiotic alone on three isolates (2 clinical,1 environmental). Keywords: antibiotic; titanium nanoparticles dioxide; antibacterial.

Metallic nanoparticles as effective sensors of bio-molecules

This work describes biologically important nanostructures of metals (AgNPs, AuNPs, and PtNPs) and metal oxides (Cu₂ONPs, CuONSs, γ-Fe₂O₃NPs, ZnONPs, ZnONPs-GS, anatase-TiO₂NPs, and rutile-TiO₂NPs) synthesized by different methods (wet-chemical, electrochemical, and green-chemistry methods). The nanostructures were characterized by molecular spectroscopic methods, including scanning/transmission electron microscopy (SEM/TEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction analysis (XRD), photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-vis), dynamic light scattering (DLS), Raman scattering spectroscopy (RS), and infrared light spectroscopy (IR). Then, a peptide (bombesin, BN) was adsorbed onto the surface of these nanostructures from an aqueous solution with pH of 7 that did not contain surfactants. Adsorption was monitored using surface-enhanced Raman scattering spectroscopy (SERS) to determine the influence of the nature of the metal surface and surface evolution on peptide geometry. Information from the SERS studies was compared with information on the biological activity of the peptide. The SERS enhancement factor was determined for each of the metallic surfaces.

Using visible light to activate antiviral and antimicrobial properties of TiO2 nanoparticles in paints and coatings: focus on new developments for frequent-touch surfaces in hospitals

The COVID-19 pandemic refocused scientists the world over to produce technologies that will be able to prevent the spread of such diseases in the future. One area that deservedly receives much attention is the disinfection of health facilities like hospitals, public areas like bathrooms and train stations, and cleaning areas in the food industry. Microorganisms and viruses can attach to and survive on surfaces for a long time in most cases, increasing the risk for infection. One of the most attractive disinfection methods is paints and coatings containing nanoparticles that act as photocatalysts. Of these, titanium dioxide is appealing due to its low cost and photoreactivity. However, on its own, it can only be activated under high-energy UV light due to the high band gap and fast recombination of photogenerated species. The ideal material or coating should be activated under artificial light conditions to impact indoor areas, especially considering wall paints or frequent-touch areas like door handles and elevator buttons. By introducing dopants to TiO₂ NPs, the bandgap can be lowered to a state of visible-light photocatalysis occurring. Naturally, many researchers are exploring this property now. This review article highlights the most recent advancements and research on visible-light activation of TiO₂-doped NPs in coatings and paints. The progress in fighting air pollution and personal protective equipment is also briefly discussed.

Graphical Abstract

Indoor visible-light photocatalytic activation of reactive oxygen species (ROS) over TiO₂ nanoparticles in paint to kill bacteria and coat frequently touched surfaces in the medical and food industries.

The environmental remediation capacity of Ulva lactuca: the potential of macroalgae to reduce the threats caused by Titanium in marine invertebrate species

As a result of the wide use of Titanium (Ti) compounds in various products, Ti and Ti nanoparticles (nTi) are released into aquatic environments, inducing varying degrees of toxicity on aquatic fauna. Ulva lactuca, green macroalgae commonly found in coastal areas, has been extensively studied due to its worldwide distribution and capacity to accumulate trace elements under toxic conditions, which makes it a good universal sorbent. The present study aimed to establish the remediation properties of U. lactuca by evaluating the toxicity of Ti and nTi in bivalves, in the presence and absence of algae. Using the bivalve species Mytilus galloprovincialis, Ti toxicity was evaluated by assessing changes in mussel's metabolic capacity and oxidative status. Results evidenced cellular damage in M. galloprovincialis exposed to Ti and nTi. This was a result of the inactivation of antioxidant defences. The presence of U. lactuca limited cellular damage, however, this was not a result of the previously demonstrated bioremediation capacity, as no accumulation of Ti was verified in algal tissues. As a metabolic depression was verified for mussels exposed to Ti/nTi in the presence of algae, we hypothesise that U. lactuca may have been responsible for changes to the water quality which induced this response.

Study of the Embryonic Toxicity of TiO2 and ZrO2 Nanoparticles

Currently, the widespread use of TiO₂ and ZrO₂ nanoparticles (NPs) in various industries poses a risk in terms of their potential toxicity. A number of experimental studies provide evidence of the toxic effect of TiO₂ and ZrO₂ NPs on biological objects. In order to supplement the level of knowledge and assess the risks of toxicity and danger of TiO₂ and ZrO₂ NPs, we decided to conduct a comprehensive experiment to study the embryonic toxicity of TiO₂ and ZrO₂ NPs in pregnant rats. For the experiment, mongrel white rats during pregnancy received aqueous dispersions of powders of TiO₂ and ZrO₂ NPs at a dose of 100 mg/kg/day. To characterize the effect of TiO₂ and ZrO₂ NPs on females and the postnatal ontogenesis of offspring, a complex of physiological and biochemical research methods was used. The results of the experiment showed that TiO₂ NPs as ZrO₂ NPs (100 mg/kg per os) cause few shifts of similar orientation in the maternal body. Neither TiO₂ NPs nor ZrO₂ NPs have an embryonic and teratogenic effect on the offspring in utero, but both modify its postnatal development.

The elements of life: A biocentric tour of the periodic table

Living systems are built from a small subset of the atomic elements, including the bulk macronutrients (C,H,N,O,P,S) and ions (Mg,K,Na,Ca) together with a small but variable set of trace elements (micronutrients). Here, we provide a global survey of how chemical elements contribute to life. We define five classes of elements: those that are (i) essential for all life, (ii) essential for many organisms in all three domains of life, (iii) essential or beneficial for many organisms in at least one domain, (iv) beneficial to at least some species, and (v) of no known beneficial use. The ability of cells to sustain life when individual elements are absent or limiting relies on complex physiological and evolutionary mechanisms (elemental economy). This survey of elemental use across the tree of life is encapsulated in a web-based, interactive periodic table that summarizes the roles chemical elements in biology and highlights corresponding mechanisms of elemental economy.

Evaluation of Antifungal Activity of Ag Nanoparticles Synthetized by Green Chemistry against Fusarium solani and Rhizopus stolonifera

Silver nanoparticles (AgNPs) have aroused great interest for applications as fungicides in agriculture. This study reports the synthesis of AgNPs by green chemistry using silver nitrate (AgNO₃) as the precursor agent and a coriander leaf extract as the reducing agent and surfactant. The evaluation of their antifungal properties was carried out when placed in contact with Fusarium solani and Rhizopus stolonifer phytopathogens. The extract and AgNP characterizations were performed using UV-Vis spectroscopy, X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), dynamic light scattering (DLS) and scanning electron microscopy (SEM). The evaluation of antifungal properties was carried out by exposing the phytopathogens to different concentrations of AgNPs in PDA (Potato Dextrose Agar). It was found that it was possible to identify the presence of flavones and flavonoids in the extract, compounds that were also involved in the synthesis process of AgNPs. In addition, the UV-Vis analysis of the obtained AgNPs by green chemistry showed resonance peaks at around 428 nm. Furthermore, a high distribution of AgNP sizes, with high concentrations of below 100 nm, was identified, according to DLS measurements. Using SEM images, the information provided by DLS was confirmed, and a crystallite size of 29.24 nm was determined with the help of XRD measurements. Finally, when exposing the phytopathogens to the action of AgNPs, it was concluded that, at a concentration of 1 mg/mL AgNPs, their growth was totally inhibited.

Theranostics through Utilizing Cherenkov Radiation of Radioisotope Zr-89 with a Nanocomposite Combination of TiO2 and MnO2

Cherenkov radiation (CR) derived from the decay of diagnostic and therapeutic radionuclides is currently being studied by the scientific community to determine if these emissions can be harnessed for cancer detection and therapy. While Cherenkov luminescence imaging (CLI) has been studied in the preclinical and clinical settings, Cherenkov radiation-induced cancer therapy (CRICT) is a relatively new area of research that harnesses the emitted photons to kill cancer cells through free radical generation and DNA damage. Nanoparticles seem well suited for developing a theranostic platform that would allow researchers to visualize therapy delivery and also generate the reactive oxygen species necessary to kill cancer cells. Herein, we report the preparation of an ⁸⁹Zr-TiO₂-MnO₂ nanocomposite that incorporates transferrin onto the nanoparticle surface to enhance cancer cell growth inhibition. The incorporation of the positron emission tomography (PET) radioisotope ⁸⁹Zr (half-life: 3.3 days) allowed for the detection of the nanoparticle using PET and for the creation of Cherenkov emissions that interacted with the nanoparticle surface to generate free radicals for therapy delivery. After preparation, these systems were observed to be stable in various media and provided excellent tumor growth control after being intratumorally injected into mice bearing CT-26 tumors. These results demonstrate that a therapeutically efficient CRICT platform can be generated using commercially available and affordable materials.