Facile Synthesis of Ultrastable Fluorescent Copper Nanoclusters and Their Cellular Imaging Application

Cu superparticle-based aggregation induced enhancement strategy with PVDF-HFP/CeVO4 NP sensing interface for miR-103a detection

Aggregation-induced emission (AIE) has been widely used in research on electrochemiluminescence (ECL) due to its excellent luminescence intensity. In this work, copper superparticles (Cu SPs) were used to construct ECL biosensor to detect the microRNA-103a (miRNA-103a) in triple-negative breast cancer (TNBC) tumor tissues. Firstly, GSH-capped copper clusters were used as precursors to prepare Cu SPs by the AIE effect. Compared with clusters, Cu SPs possessed higher luminescence performance and energy stability, making them an ideal choice for ECL nanoprobe. The film of PVDF-HFP/CeVO4 NPs was constructed and modified with CPBA and GSH as the sensing interface (PCCG). The PCCG film displayed good conductivity and hydrophilicity, and desirable mechanical stability. Moreover, the PCCG film can induce high carrier mobility rates and dissociate large amounts of the co-reactant K2S2O8 to enhance the ECL intensity of Cu SPs. As a result, the prepared ECL sensor with the catalyzed hairpin assembly (CHA) strategy was employed to quantify miRNA-103a in the range of 100 fM to 100 nM. The biosensor provided a novel analytical approach for the clinical diagnosis of TNBC.

Utilizing Copper Nanoclusters as a Fluorescent Probe for Quantitative Monitoring of Doxorubicin Anticancer Drug

Monitoring the amount of chemotherapeutic drugs in biological fluids is extremely important for dose adjustment or control of side effects during the treatment process. In this study, copper nanoclusters (Cu NCs) were synthesized via a one-pot method using ammonium citrate as the reducing agent. Cu NCs exhibited bright blue fluorescence, good optical properties and outstanding photostability. The produced Cu NCs were characterized in detail by UV‒vis absorption, fluorescence spectroscopy and transmission electron microscopy (TEM). The produced Cu NCs showed a high quantum yield of 0.97. A fluorescence system was used for doxorubicin (DOX) determination using Cu NCs as a nanoprobe. The presence of DOX decreased the fluorescence intensity of the CuNCs at 445 nm but increased the fluorescence intensity of the CuNCs at 619 nm. As a result, quantitative detection of DOX can be achieved by measuring the ratio of fluorescence intensities at 445 and 619 nm (F619/F445). The fluorescence quenching activity of the Cu NCs was determined to have a linear relationship with the amount of DOX anticancer drug in the range of 1-15 ppb, and the usability of the Cu NCs as a sensor for detection in biological fluids was demonstrated. It was determined that this method can be used to measure the amount of DOX in biological samples effectively.

Fluorescence and colorimetric dual-mode multienzyme cascade nanoplatform based on CuNCs/FeMn-ZIF-8/PCN for detection of sarcosine

It is critical to develop a highly efficient and sensitive method for detecting the biomarker sarcosine (SA) of prostate cancer due to its importance for men's health. In our work, a fluorescence (FL) and colorimetric dual-mode multienzyme cascade nanoplatform for SA detection was designed and constructed. CuNCs/FeMn-ZIF-8/PCN nanocomposites with high FL properties and peroxidase-like activity were successfully prepared by encapsulating copper nanoclusters (CuNCs) into FeMn-ZIF-8 and then loaded onto P-doped graphitic carbon nitride (PCN). Furthermore, the nanocomposites served as carriers for the immobilization of sarcosine oxidase (SOX) to construct a high-efficiency dual-mode multienzyme cascade nanoplatform CuNCs/SOX@FeMn-ZIF-8/PCN for the detection of SA. The intermediate H2O2 generated in the cascade caused the FL quenching of nanocomposites and the discoloration of 3,3',5,5'-tetramethylbenzidin. The linear ranges for SA detection in the dual-mode system were 1-100 μM (FL) and 1-200 μM (colorimetric), with detection limits of 0.34 and 0.59 μM, respectively. This nanoplatform exhibited notable repeatability, specificity, and stability, making it suitable for detecting sarcosine in real human urine samples. Therefore, this dual-mode multienzyme cascade nanoplatform would have a potential applicative prospect for detecting SA and other biomarkers in real clinical samples.

Potential impact of various surface ligands on the cellular uptake and biodistribution characteristics of red, green, and blue emitting Cu nanoclusters

Surface functionalization has a prominent influence on tuning/manipulating the physicochemical properties of nanometer scaled materials. Ultrasmall sized nanoclusters with very few atoms have received enormous attention due to their bright fluorescence, biocompatibility, lower toxicity, good colloidal stability and strong photostability. These properties make them suitable for diagnostic applications. In this work, we intend to study the effect of surface functional ligands on their biodistribution both in vitro and in vivo organelle systems for bioimaging applications.

Understanding the Stability of an Unprecedented Si-Be Bond within Quantum Confinement

As of today, the Si-Be bond remains underexplored in the literature, and therefore its anomalous behavior continues to be an unsolved puzzle to date. Therefore, the present study aims at evaluating the integrity of an unprecedented Si-Be bond within quantum confinement. To accomplish this, first-principles-based calculation are performed on Be-doped silicon clusters with atomic sizes 6, 7, and 10. Silicon clusters are sequentially doped with one, two, and three Be atoms, and their thermal response is registered in the temperature range of 200-1500 K, which discloses several research findings. During the course of the simulations, the clusters face various thermal events such as solid cluster phase, rapid structural metamorphosis, and fragmentation. Si-Be nanoalloy clusters are noted to be thermally stable at lower temperatures (200-700 K); however, they begins to disintegrate earlier at a temperature as low as 800 K. This lower stability is attributed to the weak nature of Si and Be heteroatomic interactions, which is corroborated from the structural and electronic property analysis of the doped clusters. In addition to this, the performance of Be-doped clusters at finite temperatures is also compared with the thermal response of two other popular systems, viz., C- and B-doped silicon clusters.

Transformation of a copper-based metal-organic polyhedron into a mixed linker MOF for CO2 capture

A new mixed linker metal-organic framework (MOF) has been synthesized from a copper-based metal-organic polyhedron (MOP-1) and 2,2'-bipyridine (2,2'-bipy). The CuMOF-Bipy with a formula of [Cu₂(2,2'-bpy)₂(m-BDC)₂]_n is comprised of a binuclear Cu(II) node coordinated to 2,2'-bipy, and isophthalic acid (m-BDC), which bridges to neighboring nodes. The crystal structure of CuMOF-Bipy consists of a stacked two-dimensional framework with the sql topology. CuMOF-Bipy was characterized by single-crystal X-ray diffraction (SC-XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and CO₂ sorption. CuMOF-Bipy was shown to have one-dimensional sinusoidal channels that allow diffusion of CO₂ but not N₂.

Surface Ligand Influences the Cu Nanoclusters as a Dual Sensing Optical Probe for Localized pH Environment and Fluoride Ion

Functional metal nanomaterials, especially in the nanocluster (NC) size regime, with strong fluorescence, aqueous colloidal stability, and low toxicity, necessitate their application potential in biology and environmental science. Here, we successfully report a simple cost-effective method for red-/green-color-emitting protein/amino-acid-mediated Cu NCs in an aqueous medium. As-synthesized Cu NCs were characterized through UV-Vis absorption spectroscopy, fluorescence spectroscopy, time-resolved photoluminescence, dynamic light scattering, zeta potential, transmission electron microscopy and X-ray photoelectron spectroscopy. The optical properties of both Cu NCs responded linearly to the variation in pH in the neutral and alkaline ranges, and a robust pH reversible nature (between pH 7 and 11) was observed that could be extended to rapid, localized pH sensor development. However, a contrasting pH response nature between protein-Cu NCs and amino acid-Cu NCs was recorded. The alteration in protein secondary structure and strong binding nature of the surfactants were suggested to explain this behavior. Furthermore, we investigated their use as an efficient optical probe for fluoride ion detection. The limit of detection for protein-Cu NCs is 6.74 µM, whereas the limit of detection for amino acid-Cu NCs is 4.67 µM. Thus, it is anticipated that ultrasmall Cu NCs will exhibit promise in biological and environmental sensing applications.

White light-emitting, biocompatible, water-soluble metallic magnesium nanoclusters for bioimaging applications

Ultra-small (1.6 nm), water-soluble, white light-emitting (WLE), highly stable (∼8 months) BSA templated metallic (Mg⁰) nanoclusters (fluorescent magnesium nanoclusters = FMNCs) is developed using the green and facile route. Synthesis was facilitated by the reduction of magnesium salt, where template bovine serum albumin is utilized as a reducing agent and ascorbic acid act as a capping agent to impart stability in water, thereby obtaining stabilized Mg⁰nanoclusters In solution, stabilized Mg⁰nanoclusters produce white light (450-620 nm with FWHM ∼120 nm) upon 366 nm light excitation. This white light emission was found to have a CIE coordinate of 0.30, 0.33 [pure white light CIE (0.33, 0.33)]. Taking advantage of WLE and ultrasmall size, FMNCs were used forin vitrofluorescence imaging of HaCaT cell lines, yielding blue (τ= 2.94 ns, with a relative of QY = 1.2 % w.r.t QS), green (τ= 3.07 ns; relative quantum yield of 4.6% w.r.t R6G) and red (τ= 0.3 ns) images. Further, incubation of FMNCs with HEK293 (Human embryonic kidney cell) and cancerous MDA-MB-231 (Breast cancer cell line) human cell lines yielded 100 % cell viability. Current work is envisioned to contribute significantly in the area of science, engineering, and nanomedicine.

A FRET Fluorescent Sensor for Ratiometric and Visual Detection of Sulfide Based on Carbon Dots and Silver Nanoclusters

In this work, the fluorescent sensor based on fluorescence resonance energy transfer (FRET) and electrostatic interaction (EI) was prepared for the ratiometric and visual detecting S^2-. The FRET fluorescent sensor consists of two fluorophores, with carbon dots (CDs) as energy donors and silver nanoclusters (Ag NCs) as acceptors. At 390 nm excitation, CDs and Ag NCs showed two well-separated peaks at 445 nm and 660 nm, separately. The existence of S^2- caused the red fluorescence at 660 nm to be quenched, whereas the blue fluorescence at 445 nm was restored, and the fluorescence color of the ratiometric sensor changed from pink to blue. It could be employed in ratiometric and visual detecting S^2-. The linear range of quantitative detection S^2- was 0.5-100 μM, and its detection limit was 0.35 μM. CDs-Ag NCs could be used for detecting S^2- in mineral water and tap water. The results showed that the FRET ratiometric fluorescent sensor exhibits good anti-interference and high selectivity for detecting S^2- in environmental water samples.

Synthesis of Fluorescent Titanium Nanoclusters at ambient temperature for highly sensitive and selective detection of Creatine Kinase MM in myocardial infarction

Fluorescent-based biosensing in Photoluminescence nanomaterials has emerged as a new sensing platform commonly used for disease diagnosis. However, the synthesis of Titanium nanoclusters is highly challenging since Titanium is easily oxidized into TiO₂ at ambient temperature. To overcome this problem, we used an acidic medium and simple and robust protocol to synthesize the Titanium nanoclusters of 3-4 nm diameter, which could report the first fluorescent Titanium nanoclusters. New approaches for the novel synthesis of TiNCs can be used for rapid sensing of myocardial infarction (cardiac arrest). In converting creatine to phosphocreatine, CK-MM activates the reaction to convert ATP to ADP, thereby releasing the phosphate groups. Titanium nanoclusters bind strongly to the phosphate group and then quench the Fluorescence. Thus, this phenomenon can be further applied for quantification approaches. The quenching of fluorescence intensity with CK-MM concentration is linear with R² = 0.9829. The current approach can be applied for CK-MM sensing for a wide concentration range (0.625 U/L - 10 U/L). The detection limit was 0.2513 ng/ml in aqueous medium and 0.3465 ng/ml in human serum with high sensitivity when compared with the previous reported methods. Also, this is the first fluorescent-based sensing method to detect CK- MM. The fluorescent TiNCs is a novel platform to be widely applied for the phosphopeptide and phosphoprotein analysis due to the strong and covalent bondings between Ti with P atoms in the near future in medicine, biomedicine, and biological fields.

The Multifarious Applications of Copper Nanoclusters in Biosensing and Bioimaging and Their Translational Role in Early Disease Detection

Nanoclusters possess an ultrasmall size, amongst other favorable attributes, such as a high fluorescence and long-term colloidal stability, and consequently, they carry several advantages when applied in biological systems for use in diagnosis and therapy. Particularly, the early diagnosis of diseases may be facilitated by the right combination of bioimaging modalities and suitable probes. Amongst several metallic nanoclusters, copper nanoclusters (Cu NCs) present advantages over gold or silver NCs, owing to their several advantages, such as high yield, raw abundance, low cost, and presence as an important trace element in biological systems. Additionally, their usage in diagnostics and therapeutic modalities is emerging. As a result, the fluorescent properties of Cu NCs are exploited for use in optical imaging technology, which is the most commonly used research tool in the field of biomedicine. Optical imaging technology presents a myriad of advantages over other bioimaging technologies, which are discussed in this review, and has a promising future, particularly in early cancer diagnosis and imaging-guided treatment. Furthermore, we have consolidated, to the best of our knowledge, the recent trends and applications of copper nanoclusters (Cu NCs), a class of metal nanoclusters that have been gaining much traction as ideal bioimaging probes, in this review. The potential modes in which the Cu NCs are used for bioimaging purposes (e.g., as a fluorescence, magnetic resonance imaging (MRI), two-photon imaging probe) are firstly delineated, followed by their applications as biosensors and bioimaging probes, with a focus on disease detection.

A water-stable Zn4O-based MOF decorated with carbazolyl chromophores for multi-responsive fluorescence sensing of Fe3+, Cr2O72− and nitro-compounds

A MOF with strong deep blue light emission and high quantum efficiency has high selectivity and sensitivity for detecting 2,6-dichloro-4-nitroaniline.

Facile synthesis of Cu N-lauroyl sarcosinate nanozymes with laccase-mimicking activity and identification of toxicity effects for C. elegans

Toxicity assessment of Caenorhabditis elegans Cu-Ls Nz with laccase-like activity.

Sensitive Aptamer SERS and RRS Assays for Trace Oxytetracycline Based on the Catalytic Amplification of CuNCs

A new method for the determination of oxytetracycline (OTC) has been established by coupling the catalytic amplification reaction of copper nanoclusters (CuNCs) with the aptamer reaction. CuNCs prepared by a wet chemical method have the catalytic activity for the formation of gold nanoparticles (AuNPs) resulting from a HAuCl₄-ethanol (En) reaction. The experimental results showed that OTC aptamer (Apt) can be adsorbed on the surface of CuNCs in a non-specific way, thus inhibiting its catalytic activity. When OTC was added to the solution, the OTC-Apt complex was generated by a specific reaction, which made the CuNCs desorb and restore their catalytic activity. With the increase of OTC, the recovery of the catalytic activity of CuNCs is strengthened, the reaction speed is accelerated, and the number of AuNPs is increased. The generated AuNPs exhibited surface enhanced Raman scattering (SERS) signals at 1615 cm⁻¹ in the presence of Vitoria blue 4R (VB4R) molecular probes, and a resonance Rayleigh scattering (RRS) peak at 586 nm. There is a good linear relationship between the intensities of SERS, or RRS, and OTC concentration at the range of 37.5–300 ng/L or 37.5–225 ng/L, respectively. A new SERS and RRS assay for the determination of trace OTC based on the regulation of CuNCs catalysis was established.