Physicochemical and Biological Performance of Aloe Vera-Incorporated Native Collagen Films

Thymol, a Monoterpenoid within Polymeric Iodophor Formulations and Their Antimicrobial Activities

Antimicrobial resistance (AMR) poses an emanating threat to humanity's future. The effectiveness of commonly used antibiotics against microbial infections is declining at an alarming rate. As a result, morbidity and mortality rates are soaring, particularly among immunocompromised populations. Exploring alternative solutions, such as medicinal plants and iodine, shows promise in combating resistant pathogens. Such antimicrobials could effectively inhibit microbial proliferation through synergistic combinations. In our study, we prepared a formulation consisting of Aloe barbadensis Miller (AV), Thymol, iodine (I2), and polyvinylpyrrolidone (PVP). Various analytical methods including SEM/EDS, UV-vis, Raman, FTIR, and XRD were carried out to verify the purity, composition, and morphology of AV-PVP-Thymol-I2. We evaluated the inhibitory effects of this formulation against 10 selected reference strains using impregnated sterile discs, surgical sutures, gauze bandages, surgical face masks, and KN95 masks. The antimicrobial properties of AV-PVP-Thymol-I2 were assessed through disc diffusion methods against 10 reference strains in comparison with two common antibiotics. The 25-month-old formulation exhibited slightly lower inhibitory zones, indicating changes in the sustained-iodine-release reservoir. Our findings confirm AV-PVP-Thymol-I2 as a potent antifungal and antibacterial agent against the reference strains, demonstrating particularly strong inhibitory action on surgical sutures, cotton bandages, and face masks. These results enable the potential use of the formulation AV-PVP-Thymol-I2 as a promising antimicrobial agent against wound infections and as a spray-on contact-killing agent.

Effect of different crosslinking agents on hybrid chitosan/collagen hydrogels for potential tissue engineering applications

Tissue engineering (TE) demands scaffolds that have the necessary resistance to withstand the mechanical stresses once implanted in our body, as well as excellent biocompatibility. Hydrogels are postulated as interesting materials for this purpose, especially those made from biopolymers. In this study, the microstructure and rheological performance, as well as functional and biological properties of chitosan and collagen hydrogels (CH/CG) crosslinked with different coupling agents, both natural such as d-Fructose (F), genipin (G) and transglutaminase (T) and synthetic, using a combination of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride with N-hydroxysuccinimide (EDC/NHS) will be assessed. FTIR tests were carried out to determine if the proposed crosslinking reactions for each crosslinking agent occurred as expected, obtaining positive results in this aspect. Regarding the characterization of the properties of each system, two main trends were observed, from which it could be established that crosslinking with G and EDC-NHS turned out to be more effective and beneficial than with the other two crosslinking agents, producing significant improvements with respect to the base CH/CG hydrogel. In addition, in vitro tests demonstrated the potential application in TE of these systems, especially for those crosslinked with G, T and EDC-NHS.

From medical strategy to foodborne prophylactic strategy: Stabilizing dental collagen with aloin

Infectious oral diseases are longstanding global public health concerns. However, traditional medical approaches to address these diseases are costly, traumatic, and prone to relapse. Here, we propose a foodborne prophylactic strategy using aloin to safeguard dental collagen. The effect of aloin on the stability of dental collagen was evaluated by treating dentin with a solution containing aloin (0.1 mg/mL) for 2 min. This concentration is comparable to the natural aloin content of edible aloe. Furthermore, we investigated the mechanisms underlying the interactions between aloin and dentin collagen. Our findings, obtained through fluorescence spectroscopy, attenuated total reflection Fourier transform infrared spectroscopy, Gaussian peak fitting, circular dichroism spectroscopy, and X-ray diffraction, revealed that aloin interacts with dental collagen through noncovalent bonding, specifically hydrogen bonding in situ. This interaction leads to a reduction in the distance between molecules and an increase in the proportion of stable α-helical chains in the dental collagen. The ultimate tensile strength and thermogravimetric analysis demonstrated that dental collagen treated with aloin exhibited improved mechanical strength and thermostability. Additionally, the release of hydroxyproline, cross-linked carboxy-terminal telopeptide of type I collagen, and C-terminal cross-linked telopeptide of type I collagen, along with weight loss, indicated an enhancement in the enzymatic stability of dental collagen. These findings suggest that aloin administration could be a daily, nondestructive, and cost-effective strategy for managing infectious oral diseases.

Green Synthesized Polymeric Iodophors with Thyme as Antimicrobial Agents

Antimicrobial resistance (AMR) is a growing concern for the future of mankind. Common antibiotics fail in the treatment of microbial infections at an alarming rate. Morbidity and mortality rates increase, especially among immune-compromised populations. Medicinal plants and their essential oils, as well as iodine could be potential solutions against resistant pathogens. These natural antimicrobials abate microbial proliferation, especially in synergistic combinations. We performed a simple, one-pot synthesis to prepare our formulation with polyvinylpyrrolidone (PVP)-complexed iodine (I2), Thymus Vulgaris L. (Thyme), and Aloe Barbadensis Miller (AV). SEM/EDS, UV-vis, Raman, FTIR, and XRD analyses verified the purity, composition, and morphology of AV-PVP-Thyme-I2. We investigated the inhibitory action of the bio-formulation AV-PVP-Thyme-I2 against 10 selected reference pathogens on impregnated sterile discs, surgical sutures, cotton gauze bandages, surgical face masks, and KN95 masks. The antimicrobial properties of AV-PVP-Thyme-I2 were studied by disc diffusion methods and compared with those of the antibiotics gentamycin and nystatin. The results confirm AV-PVP-Thyme-I2 as a strong antifungal and antibacterial agent against the majority of the tested microorganisms with excellent results on cotton bandages and face masks. After storing AV-PVP-Thyme-I2 for 18 months, the inhibitory action was augmented compared to the fresh formulation. Consequently, we suggest AV-PVP-Thyme-I2 as an antimicrobial agent against wound infections and a spray-on contact killing agent.

Aloe vera/Chitosan-Based Edible Film with Enhanced Antioxidant, Antimicrobial, Thermal, and Barrier Properties for Sustainable Food Preservation

Food bioactive packaging has received increasing attention from consumers and the food industry for its potential to reduce food waste and environmental issues. Several materials can be used to produce edible films/coats; however, bio-based, cost-effective, and sustainable coatings have gained a high reputation these days. For instance, Aloe vera gel (AV) is a promising bio-based material for edible coatings and films; therefore, the present study aimed to investigate the film-forming abilities of AV and Chitosan (CH) combination as a potential active food packaging material. The physicochemical and mechanical characteristics of formed films of various combinations were prepared at different concentrations, i.e., CH (0.5% w/v), AV (100%), CH:AV (75:25), and CH:AV (60:40). The results showed significant differences among all the prepared edible films wherein these differences were mainly on account of incorporating AV gel. The rheological and antioxidant properties of the formulations improved with the inclusion of AV gel. The films composed of CH:AV (60:40) positively affected the water solubility, thermal properties, and water vapour permeability of the edible films. The X-ray Diffraction (XRD) and Scanning electron microscopy (SEM) results showed that the films composed of CH:AV, (60:40) were amorphous and had smooth morphology. Further, the edible film solutions were applied to fresh figs (Ficus carica) to investigate their role in preserving fruits during storage. A significant reduction in microbial growth was found in coated fruits after 28 days of cold storage. The films composed of CH and AV showed overall improved results compared to the CH (0.5%, w/v). Therefore, the used formulations (CH:AV, 60:40) can form a sustainable film that has the potential to be utilized for fresh product preservation to maintain its quality and shelf life.

Biodegradable and biocompatible collagen-based hybrid materials for force sensing applications

With the aim of replacing synthetic macromolecules by biological macromolecules for advanced applications, collagen films were produced with two different ionic liquids (ILs), choline dihydrogen phosphate ([Ch][DHP]) and choline serinate ([Ch][Seri]), added in order to modulate the electrical responses. The films were prepared by casting, varying IL content between 0 and 6 wt%. The morphology and thermal properties of the resulting films were found to be independent of both IL type and content. However, the highest direct curret (d.c.) electrical conductivity (1.4 × 10-8 S·cm-1) was achieved for collagen films containing 3 wt% [Ch][DHP]. Furthermore, it was demonstrated that IL/collagen films were non-cytotoxic, with cell activity values exceeding 70 %. These collagen films were proven to be suitable for force sensing applications, displaying excellent sensitivity and stability upon repeated testing.

Regenerative potential of a novel aloe vera modified tricalcium silicate cement as a pulp capping material: An animal study

This study compared the histologic response of a pulp capping material Matreva MTA modified with different concentrations of aloe vera (AV) solutions to Biodentine cement. Ninety dogs' teeth were included and categorized according to the capping material into five groups (18 teeth each); Group I (Biodentine), group II (Matreva MTA), group III (Matreva MTA 10% AV), group IV (Matreva MTA 20% AV) and group V (Matreva MTA 30% AV). The histopathological findings were recorded at 2, 4, and 8 weeks. Matreva MTA and Biodentine groups showed the highest inflammatory cell count compared to the AV-modified Matreva MTA groups at 2- and 4-week intervals (p>0.05). Moreover, the AV-modified Matreva MTA and Biodentine groups showed higher dentin bridge thickness compared to unmodified Matreva MTA at different follow-up periods (p<0.05). AV can significantly enhance the in vivo bioactivity of Matreva MTA, inducing mild inflammation and good dentine bridge formation comparable to Biodentine.

Effect of Aloe vera and carboxymethyl cellulose-derived binary blend edible coating on the shelf life of fresh-cut apple

In recent years, the demand and market for minimally processed fruits are increasing worldwide. Fresh-cut apples are extremely sensitive to environmental factors including oxygen, temperature, and microorganisms in resulting the browning of apples. Therefore, in this study, different concentration of blended edible-coating solution was prepared using Aloe vera and carboxymethyl cellulose (1:1, 1:2, 2:1, 3:3, 3:2, 4:2, 2:4, 3:4, and 4:3, respectively). Lease particle size (101.74 ± 0.67 nm) of the coating solution was observed with 3% A. vera and 2% carboxymethyl cellulose (CMC). Afterward, the shelf life of the apples was evaluated for 10 days at refrigeration condition. Results showed that a significant difference was found in weight loss of coated (6.42%-10.26%) and uncoated apples (8.12%-15.32%) for 2-10 days. Moreover, the titrable acidity of the cut apples increased during the storage time. Rheological data emerged that the viscosity of the coating solution decreases with the increasing temperature from 0 to 50°C. Fourier transform infrared spectroscopy data confirmed the presence of hydroxyl group (-OH), C=O, C-O, and N-H banding in the A. vera, CMC, and blend-coating solution. The blend solution indicated excellent antimicrobial efficiency. Total phenolic content of coated and uncoated apples at 0 day was 737.55 mg GAE kg-1 for uncoated and 717.88 mg GAE kg-1, respectively. Whereas, aerobic and psychrotrophic bacteria counts for edible coated apples significantly lower than control apples. For coated apples, aerobic and psychrotrophic bacteria counts were 1.59 ± 0.84 and 1.25 ± 0.49 log CFU g-1 were 4.26 ± 0.67 and 2.68 ± 0.22 log CFU g-1 at 10th day, respectively. Overall, it can be inferred that blend of A. vera and carboxymethyl cellulose could be used as a nontoxic potential anti-browning and antimicrobial component for the enhancement of the shelf life and additional nutritional value of fresh-cut apples.

Tailoring the multiscale mechanics of tunable decellularized extracellular matrix (dECM) for wound healing through immunomodulation

With the discovery of the pivotal role of macrophages in tissue regeneration through shaping the tissue immune microenvironment, various immunomodulatory strategies have been proposed to modify traditional biomaterials. Decellularized extracellular matrix (dECM) has been extensively used in the clinical treatment of tissue injury due to its favorable biocompatibility and similarity to the native tissue environment. However, most reported decellularization protocols may cause damage to the native structure of dECM, which undermines its inherent advantages and potential clinical applications. Here, we introduce a mechanically tunable dECM prepared by optimizing the freeze-thaw cycles. We demonstrated that the alteration in micromechanical properties of dECM resulting from the cyclic freeze-thaw process contributes to distinct macrophage-mediated host immune responses to the materials, which are recently recognized to play a pivotal role in determining the outcome of tissue regeneration. Our sequencing data further revealed that the immunomodulatory effect of dECM was induced via the mechnotrasduction pathways in macrophages. Next, we tested the dECM in a rat skin injury model and found an enhanced micromechanical property of dECM achieved with three freeze-thaw cycles significantly promoted the M2 polarization of macrophages, leading to superior wound healing. These findings suggest that the immunomodulatory property of dECM can be efficiently manipulated by tailoring its inherent micromechanical properties during the decellularization process. Therefore, our mechanics-immunomodulation-based strategy provides new insights into the development of advanced biomaterials for wound healing.

Bio-based polymers containing traditional medicinal fillers for wound healing applications - An evaluation of neoteric development and future perspectives

In recent years, health-care providers have seen more patients with difficult-to-treat wounds and burns. The biopolymer-based wound dressing protects the wounded area while assisting in the recovery of dermal and epithelial tissues throughout the healing process. The overall number of patients with chronic lesions has been expanding due to developing society, over weight, and cardiovascular illness. For the treatment of chronic wounds, there is an increasing demand for the development of ideal wound dressing materials with excellent properties such as antibacterial activity, biocompatibility, free radical scavenging capacity, non-adherent property, hydrophilicity, and so on. Nevertheless, owing to the above mention properties, natural polymers are being used for several key functions of biomedicine like narcotic distribution systems, tissue manufacturing, bandages, and so on. Accordingly, the significance of these bio-based polymers interfered with healing functions that lead to informing and inspiring youth and scientist researchers worldwide to grab with these far-reaching areas of medicine and biology. The review highlights the physiochemical properties of natural polymers, the biological evaluation of various materials as wound dressings, their synthesis and mechanical properties, clinical status, challenges, and future perspectives.

A New Biomaterial Derived from Aloe vera-Acemannan from Basic Studies to Clinical Application

Aloe vera is a kind of herb rich in polysaccharides. Acemannan (AC) is considered to be a natural polysaccharide with good biodegradability and biocompatibility extracted from Aloe vera and has a wide range of applications in the biomedical field due to excellent immunomodulatory, antiviral, antitumor, and tissue regeneration effects. In recent years, clinical case reports on the application of AC as a novel biomedical material in tissue regenerative medicine have emerged; it is mainly used in bone tissue engineering, pulp-dentin complex regeneration engineering, and soft tissue repair, among other operations. In addition, multiple studies have proved that the new composite products formed by the combination of AC and other compounds have excellent biological and physical properties and have broader research prospects. This paper introduces the preparation process, surface structure, and application forms of AC; summarizes the influence of acetyl functional group content in AC on its functions; and provides a detailed review of the functional properties, laboratory studies, clinical cutting-edge applications, and combined applications of AC. Finally, the current application status of AC from basic research to clinical treatment is analyzed and its prospects are discussed.

Formulation of pH-responsive highly swellable hydrogel scaffolds for controlled release of tramadol HCl: characterization and biocompatibility evaluation

Introduction: The objective of current project was to formulate a system for controlled delivery of Tramadol HCl (TRD), an opioid analgesic used in the treatment of moderate to severe pain. Methods: For this purpose, a pH responsive AvT-co-poly hydrogel network was formulated through free radical polymerization by incorporating natural polymers i.e., aloe vera gel and tamarind gum, monomer and crosslinker. Formulated hydrogels were loaded with Tramadol HCl (TRD) and evaluated for percent drug loading, sol-gel fraction, dynamic and equilibrium swelling, morphological characteristics, structural features and in-vitro release of Tramadol HCl. Results and Discussions: Hydrogels were proved to be pH sensitive as remarkable dynamic swelling response ranging within 2.94g/g-10.81g/g was noticed at pH 7.4 as compared to pH 1.2. Percent drug loading was in the range of 70.28%-90.64% for all formulations. Thermal stability and compatibility of hydrogel components were validated by DSC analysis and FTIR spectroscopy. Controlled release pattern of Tramadol HCl from the polymeric network was confirmed as maximum release of 92.22% was observed for over a period of 24 hours at pH 7.4. Moreover, oral toxicity studies were also conducted in rabbits to investigate the safety of hydrogels. No evidence of any toxicity, lesions and degeneration was reported, confirming the biocompatibility and safety of grafted system.

Bimetallic (Ag and MgO) nanoparticles, Aloe vera extracts loaded xanthan gum nanocomposite for enhanced antibacterial and in-vitro wound healing activity

We prepared nanocomposite (XG-AVE-Ag/MgO NCs) using the bimetallic Ag/MgO NPs, Aloe vera extract (AVE), and biopolymer (Xanthan gum (XG)) to archive a synergetic antibacterial and wound healing activity. The changes in XRD peaks at 20° of XG-AVE-Ag/MgO NCs indicated the XG encapsulation. The XG-AVE-Ag/MgO NCs showed the zeta potential and zeta size of 151.3 ± 3.14 d·nm and -15.2 ± 1.08 mV with a PDI of 0.265 while TEM showed an average size of 61.19 ± 3.89. The EDS confirmed the co-existence of Ag, Mg, carbon, oxygen, and nitrogen in NCs. XG-AVE-Ag/MgO NCs displayed higher antibacterial activity in terms of zone of inhibition, at 15.00 ± 0.12 mm for B. cereus and 14.50 ± 0.85 mm for E. coli. Moreover, NCs exhibited MICs of 2.5 μg/mL for E. coli, and 0.62 μg/mL for B. cereus. The in vitro cytotoxicity and hemolysis assays indicated the non-toxic properties of XG-AVE-Ag/MgO NCs. The higher wound closure activity was observed with the treatment of XG-AVE-Ag/MgO NCs (91.19 ± 1.87 %) compared to the control, untreated group (68.68 ± 3.54 %) at 48 h of incubation. These findings revealed that XG-AVE-Ag/MgO NCs was promising non-toxic, antibacterial, and wound-healing agent that deserved further in-vivo studies.

Polymeric Membranes of Chitosan/Aloe Vera Gel Fabrication With Enhanced Swelling and Antimicrobial Properties for Biomedical Applications

Since ancient times, medicinal plants have been used as traditional medicine to treat a variety of ailments. Aloe vera (AV) gel's therapeutic potential is one of the most effective approach in the fabrication of functional materials. The current study aimed to prepare the AV and chitosan (CS) membranes using various cross-linkers that were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform-infrared (FT-IR) spectroscopy, thermal gravimetric analysis (TGA), and ultraviolet-visible (UV-Visible) techniques, as well as swelling ratio and antimicrobial studies. SEM analysis revealed that the membrane is porous, with interconnected pores. The inclusion of AV contents in the membrane improved thermal stability and crystallinity. The swelling ratio of the ACPG-3 membrane with a 2:1 CS to AV ratio was 366%. The membranes showed promising antimicrobial activity against Escherichia coli, Staphylococcus aureus, Bacillus subtilis, and Pasteurella multocida strains. The findings revealed that polymeric CS/AV membranes have effective potential for use in the biomedical field.

High-Content Aloe vera Based Hydrogels: Physicochemical and Pharmaceutical Properties

The present research focuses on the physicochemical and pharmacotechnical properties of new hydrogels obtained using allantoin, xanthan gum, salicylic acid and different concentrations of Aloe vera (5, 10, 20% w/v in solution; 38, 56, 71 wt% in dry gels). The thermal behavior of Aloe vera composite hydrogels was studied using DSC and TG/DTG analyses. The chemical structure was investigated using different characterization methods (XRD, FTIR and Raman spectroscopies) and the morphology of the hydrogels was studied SEM and AFM microscopy. Pharmacotechnical evaluation on tensile strength and elongation, moisture content, swelling and spreadability was also completed. Physical evaluation confirmed that the appearance of the prepared Aloe vera based hydrogels was homogeneous and the color varied from pale beige to deep opaque beige with increasing Aloe vera concentration. All other evaluation parameters, e.g., pH, viscosity, spreadability and consistency were found to be adequate in all hydrogel formulations. SEM and AFM images show that the structure of the hydrogels condensed into homogeneous polymeric solids with the addition of Aloe vera, in accordance with the decrease in peak intensities observed via XRD analysis. These results suggest interactions between the hydrogel matrix and Aloe vera as observed via FTIR and TG/DTG and DSC analyses. Considering that Aloe vera content higher than 10% (w/v) did not stimulate further interactions, this formulation (FA-10) can be used for further biomedical applications.

The influence of UV irradiation on fish skin collagen films in the presence of xanthohumol and propanediol

Fish skin collagen films are widely used as adhesives in medicine and cosmetology. Ultraviolet (UV) irradiation can be considered as an effective sterilization method for biomaterials, however, it may also lead to material photodegradation. In this work, the influence of xanthohumol and propanediol on the physico-chemical properties of collagen films before and after UV irradiation was studied. Collagen for this research was extracted from silver carp skin and thin films were fabricated by the solution casting methods. The structure of films was researched using infrared spectroscopy. The surface properties of films were investigated using Atomic Force Microscopy (AFM) and contact angle measurements. Mechanical properties were measured as well. It was found that the addition of xanthohumol and propanediol modified the roughness of collagen films and their mechanical properties. UV irradiation led to the water loss from the film and modification of the collagen structure. In the presence of propanediol and xanthohumol the water loss after UV irradiation was smaller than in UV-irradiated collagen films without these additives.

Active edible films with plant extracts: a updated review of their types, preparations, reinforcing properties, and applications in muscle foods packaging and preservation

Currently, edible films have been increasingly explored to solve muscle food spoilage during storage, especially through the incorporation of plant extracts to develop edible packaging materials. Natural polymers matrices with plant extracts are befitting for fabricating edible films by casting methods. In the films system, the structure and physicochemical properties were strengthened via chemical interactions between active molecules in plant extracts and the reactive groups in the polymer chain. The antibacterial and antioxidant properties were dramatically reinforced through both physical and chemical actions of the plant extracts. Additionally, edible films imbedded with color-rich plant extracts could be considered as potential sensitive indicators to monitor the spoilage degree of muscle foods in response to change in gas or temperature. Furthermore, these films could increase sensory acceptability, improve quality and prolong the shelf life of muscle foods. In this article, the types, preparation methods and reinforcing properties of the edible films with plant extracts were discussed. Also, the applications of these films were summarized on quality maintenance and shelf-life extension and intelligent monitoring in muscle foods. Finally, a novel technology for film preparation achieving high-stability and sustained release of active compounds will become an underlying trend for application in muscle food packaging.

Anti-calcification potential of collagen based biological patch crosslinked by epoxidized polysaccharide

Biological patch is a kind of tissue substitute material derived from natural polymer materials for the repair of human soft tissue defects. The serious calcification of biological patch after implantation is one of the reasons for the decline and failure of patch. In previous studies, we synthesized a new biomaterial crosslinker epoxidized chitosan quaternary ammonium salt (EHTCC) and used it for the crosslinking of porcine acellular dermal matrix (pADM). The prepared EHTCC-pADM had good mechanical properties, biocompatibility and healing promoting properties. In order to broaden its application scenarios, the related properties of EHTCC-pADM as implant patch were further explored in this study. The results of X-ray diffraction (XRD) measurements showed that the structure of pADM did not change much before and after the crosslinking of EHTCC, which was conducive to the maintenance of the excellent biological properties of pADM. According to the enzymatic degradation resistance test in vitro, the resistance of EHTCC-pADM to type I collagenase degradation was significantly improved compared with non -crosslinked pADM. And with the increase of the amount of EHTCC, its degradation resistance was stronger. The experimental results showed that EHTCC-pADM can well support the growth of L929 fibroblasts and has good anti-calcification properties in vitro and in vivo.

3D-Printed Mucoadhesive Collagen Scaffolds as a Local Tetrahydrocurcumin Delivery System

Native collagen doughs were processed using a syringe-based extrusion 3D printer to obtain collagen scaffolds. Before processing, the rheological properties of the doughs were analyzed to determine the optimal 3D printing conditions. Samples showed a high shear-thinning behavior, reported beneficial in the 3D printing process. In addition, tetrahydrocurcumin (THC) was incorporated into the dough formulation and its effect on collagen structure, as well as the resulting scaffold's suitability for wound healing applications, were assessed. The denaturation peak observed by differential scanning calorimetry (DSC), along with the images of the scaffolds' surfaces assessed using scanning electron microscopy (SEM), showed that the fibrillar structure of collagen was maintained. These outcomes were correlated with X-ray diffraction (XRD) results, which showed an increase of the lateral packaging of collagen chains was observed in the samples with a THC content up to 4%, while a higher content of THC considerably decreased the structural order of collagen. Furthermore, physical interactions between collagen and THC molecules were observed using Fourier transform infrared (FTIR) spectroscopy. Additionally, all samples showed swelling and a controlled release of THC. These results along with the mucoadhesive properties of collagen suggested the potential of these THC-collagen scaffolds as sustained THC delivery systems.

Physicochemical Performance of Collagen Modified by Melissa officinalis Extract

Collagen-based materials are widely used as adhesives in medicine and cosmetology. However, for several applications, their properties require modification. In this work, the influence of Melissa officinalis on the properties of collagen films was studied. Collagen was extracted from Silver Carp skin. Thin collagen films were prepared by solvent evaporation. The structure of films was researched using infrared spectroscopy. The surface properties of films were investigated using Atomic Force Microscopy (AFM). Mechanical properties were measured as well. Antioxidant activity was determined by spectrophotometric methods using DPPH free radicals, FRAP, and CUPRAC methods. Total phenolic compounds were determined by the Folin–Ciocalteau method. It was found that the addition of Melissa officinalis modified the roughness of collagen films and their mechanical properties. Moreover, the obtained material has antioxidant properties. The parameters mentioned above are very important in potential applications of collagen films containing Melissa officinalis in cosmetics.

The Infuence of Salicin on Rheological and Film-Forming Properties of Collagen

Collagen films are widely used as adhesives in medicine and cosmetology. However, its properties require modification. In this work, the influence of salicin on the properties of collagen solution and films was studied. Collagen was extracted from silver carp skin. The rheological properties of collagen solutions with and without salicin were characterized by steady shear tests. Thin collagen films were prepared by solvent evaporation. The structure of films was researched using infrared spectroscopy. The surface properties of films were investigated using Atomic Force Microscopy (AFM). Mechanical properties were measured as well. It was found that the addition of salicin modified the roughness of collagen films and their mechanical and rheological properties. The above-mentioned parameters are very important in potential applications of collagen films containing salicin.

Fabrication and assessment of chondroitin sulfate-modified collagen nanofibers for small-diameter vascular tissue engineering applications

Chondroitin sulfate (ChS) has shown promising results in promoting cell proliferation and antithrombogenic activity. To engineered develop a dual-function vascular scaffold with antithrombosis and endothelialization, ChS was tethered to collagen to accelerate the growth of endothelial cells and prevent platelet activation. First, ChS was used to conjugate with collagen to generate glycosylated products (ChS-COL) via reductive amination. Then, the fabricated ChS-COL conjugates were electrospun into nanofibers and their morphologies and physicochemical characteristics, cell-scaffold responses and platelet behaviors upon ChS-COL nanofibers were comprehensively characterized to evaluate their potential use for small-diameter vascular tissue-engineered scaffolds. The experimental results demonstrated that the ChS modified collagen electrospun nanofibers were stimulatory of endothelial cell behavior, alleviated thrombocyte activation and maintained an antithrombotic effect in vivo in 10-day post-transplantation. The ChS-COL scaffolds encouraged rapid endothelialization, thus probably ensuring the antithrombotic function in long-term implantation, suggesting their promise for small-diameter vascular tissue engineering applications.