Delivery of Insulin via Skin Route for the Management of Diabetes Mellitus: Approaches for Breaching the Obstacles

Development of eugenol-fortified fisetin-loaded nano-invasomes gel

The goal of current investigation was to develop eugenol-fortified fisetin nano-invasomes. Fisetin-loaded invasomes were prepared using thin film hydration procedure and evaluated for various parameters. Additionally, the optimised fisetin invasomes formulation (F5) was converted to fisetin invasomes gel using Carbopol® as gelling agent and evaluated for pH, spreadability, homogeneity, drug content, in vitro fisetin release, antioxidant activity and stability study.Prepared optimised fisetin invasomes formulation (F5) demonstrated vesicles size, PDI, zeta potential and entrapment efficiency of 153.85 ± 14.32 nm, 0.208 ± 0.042, -12.67 ± 1.08 mV and 72.10 ± 6.36%. The TEM image indicated that the prepared invasomes vesicles are intact, spherical and found in the range of nanosized scale. Prepared fisetin invasomes gel showed better spreadability and in vitro fisetin released in contrast to fisetin control gel. Substantial improvement in the DPPH radical scavenging activity of fisetin invasomes gel 44.70% (3.1 µM) and 83.94% (50 µM), was noted as compared to the control gel at 39.47% (3.1 µM) and 79.10% at (50 µM). The prepared fisetin invasomes gel formulation was found stable at 4 °C.Based on the results, prepared invasomes gel formulation was found as a viable method for better delivery of bioactive compound(s) including fisetin.

Supramolecular approach to the design of nanocarriers for antidiabetic drugs: targeted patient-friendly therapy

Diabetes and its complications derived are among serious global health concerns that critically deteriorate the quality of life of patients and, in some cases, result in lethal outcome. Herein, general information on the pathogenesis, factors aggravating the course of the disease and drugs used for the treatment of two types of diabetes are briefly discussed. The aim of the review is to introduce supramolecular strategies that are currently being developed for the treatment of diabetes mellitus and that present a very effective alternative to chemical synthesis, allowing the fabrication of nanocontainers with switchable characteristics that meet the criteria of green chemistry. Particular attention is paid to organic (amphiphilic and polymeric) formulations, including those of natural origin, due to their biocompatibility, low toxicity, and bioavailability. The advantages and limitations of different nanosystems are discussed, with emphasis on their adaptivity to noninvasive administration routes.<br>The bibliography includes 378 references.

Oral administration microrobots for drug delivery

Oral administration is the most simple, noninvasive, convenient treatment. With the increasing demands on the targeted drug delivery, the traditional oral treatment now is facing some challenges: 1) biologics how to implement the oral treatment and ensure the bioavailability is not lower than the subcutaneous injections; 2) How to achieve targeted therapy of some drugs in the gastrointestinal tract? Based on these two issues, drug delivery microrobots have shown great application prospect in oral drug delivery due to their characteristics of flexible locomotion or driven ability. Therefore, this paper summarizes various drug delivery microrobots developed in recent years and divides them into four categories according to different driving modes: magnetic-controlled drug delivery microrobots, anchored drug delivery microrobots, self-propelled drug delivery microrobots and biohybrid drug delivery microrobots. As oral drug delivery microrobots involve disciplines such as materials science, mechanical engineering, medicine, and control systems, this paper begins by introducing the gastrointestinal barriers that oral drug delivery must overcome. Subsequently, it provides an overview of typical materials involved in the design process of oral drug delivery microrobots. To enhance readers' understanding of the working principles and design process of oral drug delivery microrobots, we present a guideline for designing such microrobots. Furthermore, the current development status of various types of oral drug delivery microrobots is reviewed, summarizing their respective advantages and limitations. Finally, considering the significant concerns regarding safety and clinical translation, we discuss the challenges and prospections of clinical translation for various oral drug delivery microrobots presented in this paper, providing corresponding suggestions for addressing some existing challenges.

Effectiveness, safety, and preference of transdermal insulin compared to subcutaneous insulin in the treatment of diabetes patients: a systematic review of clinical trials

BACKGROUND

Several studies were performed on transdermal (TD) insulin delivery in vitro and in vivo, and recently, the study groups included a clinical trial in humans. Therefore, this systematic review was conducted to get summary information about the effectiveness, safety, and preferability of TD insulin in comparison with subcutaneous insulin delivery.

METHODS

We conducted a thorough search to find studies in the databases Cochrane Library, MEDLINE via PubMed, Web of Science Core Collection, EMBASE, Scopus, Hinari, Medlib, and Magiran until January 2024. We included 18 randomized clinical trials.

RESULTS

Although there are various types of TD delivery methods, the TD insulin delivery methods that have undergone clinical trials are the TD patch, micro needle TD insulin delivery, and TD insulin jet injector. Eighteen studies were conducted on TD insulin delivery, which showed either superior or comparable effectiveness, safety, and preferability of TD insulin in comparison with SC insulin. About eleven out of eighteen studies (61.1%) showed more effective blood glucose control than SC delivery, and the remaining seven studies showed comparable effectiveness with SC delivery. Eleven studies (61.1%) showed equal tolerability of TD insulin versus SC insulin, and seven studies (38.9%) showed more tolerability of TD insulin over SC insulin. In most studies, eleven out of eighteen (61.1%) showed a higher preference for TD insulin delivery over traditional SC delivery; sixth out of eighteen (33.3%) showed equal preferability for TD insulin versus SC insulin; and only one study (5.6%) showed that TD insulin delivery was less preferable than SC insulin.

CONCLUSION

The review revealed that clinical trials have demonstrated the effectiveness of TD insulin delivery methods such as TD patches, MN-based insulin delivery, and insulin jet injectors compared to traditional SC routes of administration. The studies showed the superior or comparable effectiveness of TD insulin in controlling blood glucose levels. Additionally, TD insulin delivery was found to be equally or more tolerable than SC insulin delivery in all studies. Overall, the majority of studies favored TD insulin delivery over traditional SC delivery methods, highlighting its potential as a preferred option for insulin administration.

Smart Physical-Based Transdermal Drug Delivery System:Towards Intelligence and Controlled Release

Transdermal drug delivery systems based on physical principles have provided a stable, efficient, and safe strategy for disease therapy. However, the intelligent device with real-time control and precise drug release is required to enhance treatment efficacy and improve patient compliance. This review summarizes the recent developments, application scenarios, and drug release characteristics of smart transdermal drug delivery systems fabricated with physical principle. Special attention is paid to the progress of intelligent design and concepts in of physical-based transdermal drug delivery technologies for real-time monitoring and precise drug release. In addition, facing with the needs of clinical treatment and personalized medicine, the recent progress and trend of physical enhancement are further highlighted for transdermal drug delivery systems in combination with pharmaceutical dosage forms to achieve better transdermal effects and facilitate the development of smart medical devices. Finally, the next generation and future application scenarios of smart physical-based transdermal drug delivery systems are discussed, a particular focus in vaccine delivery and tumor treatment.

Design, Development and In-Vitro Characterization of Insulin Loaded Topical Pluronic-Lecithin Based Organogel Formulation for the Management of Diabetic Wound

AIM

To develop and characterize the topical insulin-loaded organogel formulation for the management of diabetic wounds.

OBJECTIVES

To formulate and evaluate organogel of insulin that can serve as a topical administration for promoting enhanced wound healing in diabetic patients by providing sustained and localized delivery of drug to the wound site.

METHODOLOGY

The insulin organogel formulated by the micro-emulsion method involves mixing the "aqueous and oil phases" at high shear. Physical and chemical properties, as well as an in vitro study with a Franz diffusion chamber, were used to evaluate the prepared organogel.

RESULTS

All formulations proved to be off-white, homogeneous, washable, and had a pH between 6 and 6.5; moreover, they were non-irritating and skin-compatible. Formulations F1-F6 had viscosity ranging from 2058 to 3168 cps, spreadability ranges of 0.35 to 0.52 g*cm/s, and gel transition ranges of 28.33 to 35.33 °C. In formulations F1-F3, the concentration of lecithin was gradually increased, and in formulations F4-F6, the concentration of PF-127 was increased, resulting in a decrease in gel transition temperature, an increase in viscosity, and a gradual change in spreadability. The higher-viscosity formulations were much more stable and had better drug release. All formulations were fitted to a kinetic model belonging to first-order kinetics. However, after examining the parameter evaluation, it was found that the formulations F2 and F6 were better suited to the kinetic model and were consistent with the first-order and Higuchi models in Korsmeyer-Peppas F2 (r2 = 0.9544 and n = 1.0412); F6 (r2 = 0.9019 and n = 1.0822), which was a confirmation of the sustainability of the release system with matrix diffusion and drug delivery mechanisms that were based on the Super-Case II transport.

CONCLUSION

Further research and clinical trials are needed to validate its efficacy, optimize the formulation, and establish its long-term safety. Topical insulin organogel has the potential to revolutionize diabetic wound management by improving healing outcomes, reducing complications, and raising the standard of living for those who have diabetes.

Non-Invasive Delivery of Insulin for Breaching Hindrances against Diabetes

Insulin is recognized as a crucial weapon in managing diabetes. Subcutaneous (s.c.) injections are the traditional approach for insulin administration, which usually have many limitations. Numerous alternative (non-invasive) slants through different routes have been explored by the researchers for making needle-free delivery of insulin for attaining its augmented absorption as well as bioavailability. The current review delineating numerous pros and cons of several novel approaches of non-invasive insulin delivery by overcoming many of their hurdles. Primary information on the topic was gathered by searching scholarly articles from PubMed added with extraction of data from auxiliary manuscripts. Many approaches (discussed in the article) are meant for the delivery of a safe, effective, stable, and patient friendly administration of insulin via buccal, oral, inhalational, transdermal, intranasal, ocular, vaginal and rectal routes. Few of them have proven their clinical efficacy for maintaining the glycemic levels, whereas others are under the investigational pipe line. The developed products are comprising of many advanced micro/nano composite technologies and few of them might be entering into the market in near future, thereby garnishing the hopes of millions of diabetics who are under the network of s.c. insulin injections.

Enhanced skin neocollagenesis through the transdermal delivery of poly-L-lactic acid microparticles by using a needle-free supersonic atomizer

In this study, a spindle-type nozzle was designed to accelerate poly-L-lactic acid (PLLA) microparticles to supersonic velocities for the transdermal delivery of these microparticles to rats. This approach is needle- and pain-free and enhances skin collagen regeneration. The addition of PLLA microparticles at a concentration of 2 mg/mL did not hinder the growth of 3 T3 fibroblasts and Raw264.7 macrophages. The TNF-α assay revealed no obvious inflammation effect of PLLA microparticles at a concentration of 1 mg/mL. A time-lapse recording revealed that after being cocultured with PLLA microparticles for 24 h, Raw264.7 macrophages gradually approached and surrounded the PLLA microparticles. When 3 T3 fibroblasts were cocultured with Raw264.7 macrophages, which were stimulated using PLLA microparticles, collagen synthesis was increased by approximately 60 % compared with that in samples without PLLA microparticles. In vivo animal experiments indicated that after the transdermal delivery of 10 shots of PLLA microparticles through the supersonic atomizer, no obvious changes or damage to the back skin of Sprague-Dawley rats was observed. More importantly, numerous PLLA microparticles penetrated the rat epidermis into the dermal layer. We found macrophages and fibroblasts present close to the PLLA microparticles. Moreover, only mild or no inflammation reaction was observed. Masson staining revealed that after 6-week implantation, 6 % and 12 % of PLLA microparticles significantly stimulated collagen regeneration in 6-week-old and 32-week-old rats. In addition, picrosirius red staining revealed a significant increase in collagen regeneration, especially for type III collagen, following the 6-week implantation of PLLA microparticles. In summary, this study demonstrated an easy, pain-free, nondestructive approach for introducing PLLA microparticles into the dermal layer by using a supersonic atomizer to stimulate collagen regeneration in vivo.

Fabrication of Black Silicon Microneedle Arrays for High Drug Loading

Silicon microneedle (Si-MN) systems are a promising strategy for transdermal drug delivery due to their minimal invasiveness and ease of processing and application. Traditional Si-MN arrays are usually fabricated by using micro-electro-mechanical system (MEMS) processes, which are expensive and not suitable for large-scale manufacturing and applications. In addition, Si-MNs have a smooth surface, making it difficult for them to achieve high-dose drug delivery. Herein, we demonstrate a solid strategy to prepare a novel black silicon microneedle (BSi-MN) patch with ultra-hydrophilic surfaces for high drug loading. The proposed strategy consists of a simple fabrication of plain Si-MNs and a subsequent fabrication of black silicon nanowires. First, plain Si-MNs were prepared via a simple method consisting of laser patterning and alkaline etching. The nanowire structures were then prepared on the surfaces of the plain Si-MNs to form the BSi-MNs through Ag-catalyzed chemical etching. The effects of preparation parameters, including Ag⁺ and HF concentrations during Ag nanoparticle deposition and [HF/(HF + H₂O₂)] ratio during Ag-catalyzed chemical etching, on the morphology and properties of the BSi-MNs were investigated in detail. The results show that the final prepared BSi-MN patches exhibit an excellent drug loading capability, more than twice that of plain Si-MN patches with the same area, while maintaining comparable mechanical properties for practical skin piercing applications. Moreover, the BSi-MNs exhibit a certain antimicrobial activity that is expected to prevent bacterial growth and disinfect the affected area when applied to the skin.

Biodegradable double-network GelMA-ACNM hydrogel microneedles for transdermal drug delivery

As a minimally invasive drug delivery platform, microneedles (MNs) overcome many drawbacks of the conventional transdermal drug delivery systems, therefore are favorable in biomedical applications. Microneedles with a combined burst and sustained release profile and maintained therapeutic molecular bioactivity could further broaden its applications as therapeutics. Here, we developed a double-network microneedles (DN MNs) based on gelatin methacrylate and acellular neural matrix (GelMA-ACNM). ACNM could function as an early drug release matrix, whereas the addition of GelMA facilitates sustained drug release. In particular, the double-network microneedles comprising GelMA-ACNM hydrogel has distinctive biological features in maintaining drug activity to meet the needs of application in treating different diseases. In this study, we prepared the double-network microneedles and evaluated its morphology, mechanical properties, drug release properties and biocompatibility, which shows great potential for delivery of therapeutic molecules that needs different release profiles in transdermal treatment.

Harnessing gut cells for functional insulin production: Strategies and challenges

Reprogrammed glucose-responsive, insulin + cells ("β-like") exhibit the potential to bypass the hurdles of exogenous insulin delivery in treating diabetes mellitus. Current cell-based therapies-transcription factor regulation, biomolecule-mediated enteric signaling, and transgenics - have demonstrated the promise of reprogramming either mature or progenitor gut cells into surrogate "β-like" cells. However, there are predominant challenges impeding the use of gut "β-like" cells as clinical replacements for insulin therapy. Reprogrammed "β-like" gut cells, even those of enteroendocrine origin, mostly do not exhibit glucose - potentiated insulin secretion. Despite the exceptionally low conversion rate of gut cells into surrogate "β-like" cells, the therapeutic quantity of gut "β-like" cells needed for normoglycemia has not even been established. There is also a lingering uncertainty regarding the functionality and bioavailability of gut derived insulin. Herein, we review the strategies, challenges, and opportunities in the generation of functional, reprogrammed "β-like" cells.

Exploring Intestinal Surface Receptors in Oral Nanoinsulin Delivery

Subcutaneous and inhaled insulins are associated with needle phobia, lipohypertrophy, lipodystrophy, and cough in diabetes treatment. Oral nanoinsulin has been developed, reaping the physiologic benefits of peroral administration. This review profiles intestinal receptors exploitable in targeted delivery of oral nanoinsulin. Intestinal receptor targeting improves oral insulin bioavailability and sustains blood glucose-lowering response. Nonetheless, these studies are conducted in small animal models with no optimization of insulin dose, targeting ligand type and content, and physicochemical and molecular biologic characteristics of nanoparticles against the in vivo/clinical diabetes responses as a function of the intestinal receptor population characteristics with diabetes progression. The interactive effects between nanoinsulin and antidiabetic drugs on intestinal receptors, including their up-/downregulation, are uncertain. Sweet taste receptors upregulate SGLT-1, and both have an undefined role as new intestinal targets of nanoinsulin. Receptor targeting of oral nanoinsulin represents a viable approach that is relatively green, requiring an in-depth development of the relationship between receptors and their pathophysiological profiles with physicochemical attributes of the oral nanoinsulin. SIGNIFICANCE STATEMENT: Intestinal receptor targeting of oral nanoinsulin improves its bioavailability with sustained blood glucose-lowering response. Exploring new intestinal receptor and tailoring the design of oral nanoinsulin to the pathophysiological state of diabetic patients is imperative to raise the insulin performance to a comparable level as the injection products.

Ganoderma lucidum Modulates Glucose, Lipid Peroxidation and Hepatic Metabolism in Streptozotocin-Induced Diabetic Pregnant Rats

The consumption of functional foods, such as mushrooms, apparently influences Gestational Diabetes Mellitus (GDM), and brings benefits to maternal-fetal health. Ganoderma lucidum contains a variety of bioactive compounds, such as polysaccharides, proteins and polyphenols that are able to control blood glucose and be used in anti-cancer therapy. We aimed to evaluate the effects of the consumption of Ganoderma lucidum (Gl) on maternal-fetal outcomes in streptozotocin-induced GDM (GDM-STZ). Pregnant rats were exposed to Gl (100 mg/kg/day) before and after the induction of GDM-STZ (single dose 40 mg/kg) on the eighth pregnancy day. Biochemical and oxidative stress parameters, reproductive performance and morphometry of fetuses were assessed. Gl reduced the glycemic response in the oral glucose tolerance test. Moreover, Gl decreased AST and ALT activities. GDM increased lipid peroxidation, which was reverted by Gl. Catalase and glutathione peroxidase activities were decreased in GDM and the administered Gl after the fetus implantation increased catalase activity. Measurements of the fetal head, thorax, craniocaudal and tail showed greater values in fetuses from rats exposed to Gl compared to GDM. Ganoderma lucidum has an encouraging nutritional and medicinal potential against GDM, since it modifies glucose metabolism, reduces lipid peroxidation, and has protective effects in fetuses born from GDM dams.

In Silico Prediction of Skin Permeability Using a Two-QSAR Approach

Topical and transdermal drug delivery is an effective, safe, and preferred route of drug administration. As such, skin permeability is one of the critical parameters that should be taken into consideration in the process of drug discovery and development. The ex vivo human skin model is considered as the best surrogate to evaluate in vivo skin permeability. This investigation adopted a novel two-QSAR scheme by collectively incorporating machine learning-based hierarchical support vector regression (HSVR) and classical partial least square (PLS) to predict the skin permeability coefficient and to uncover the intrinsic permeation mechanism, respectively, based on ex vivo excised human skin permeability data compiled from the literature. The derived HSVR model functioned better than PLS as represented by the predictive performance in the training set, test set, and outlier set in addition to various statistical estimations. HSVR also delivered consistent performance upon the application of a mock test, which purposely mimicked the real challenges. PLS, contrarily, uncovered the interpretable relevance between selected descriptors and skin permeability. Thus, the synergy between interpretable PLS and predictive HSVR models can be of great use for facilitating drug discovery and development by predicting skin permeability.

Potentials of Neuropeptides as Therapeutic Agents for Neurological Diseases

Despite recent leaps in modern medicine, progress in the treatment of neurological diseases remains slow. The near impermeable blood-brain barrier (BBB) that prevents the entry of therapeutics into the brain, and the complexity of neurological processes, limits the specificity of potential therapeutics. Moreover, a lack of etiological understanding and the irreversible nature of neurological conditions have resulted in low tolerability and high failure rates towards existing small molecule-based treatments. Neuropeptides, which are small proteinaceous molecules produced by the body, either in the nervous system or the peripheral organs, modulate neurological function. Although peptide-based therapeutics originated from the treatment of metabolic diseases in the 1920s, the adoption and development of peptide drugs for neurological conditions are relatively recent. In this review, we examine the natural roles of neuropeptides in the modulation of neurological function and the development of neurological disorders. Furthermore, we highlight the potential of these proteinaceous molecules in filling gaps in current therapeutics.

The effects of molecular weight of hyaluronic acid on transdermal delivery efficiencies of dissolving microneedles

Hyaluronic acid (HA) is widely adopted to fabricate dissolving microneedles for transdermal drug delivery applications, yet the structure-activity relationship between molecular weight of HA and transdermal delivery efficiency of microneedles (HA-MNs) has not been fully explored, particularly in the transdermal delivery of small molecule drugs. Herein, we report the fabrication of three types of HA-MNs of various molecular weights (10k, 74k and 290k Da), which incorporate rhodamine B as the model drug. We assess the influence of molecular weight of HA on the mechanical properties of HA-MNs and transdermal delivery of rhodamine B in vitro and in vivo. The mechanical strength of all types of HA-MNs exceeds the minimal force requirement for skin penetration, with the highest values of compression force found in 10k-HA-MN. Interestingly, 74k-HA-MN that owns a medium mechanical strength, exhibits the highest efficiency in transdermal delivery of rhodamine B in a porcine skin and a Franz cell transdermal model. Further in vivo fluorescence imaging of HA-MN-treated mice reveals a tunable transdermal delivery of rhodamine B, which is controllable according to the molecular weight of HA. Importantly, 74k-HA-MN treatment demonstrates the highest initial delivering amount and longest retention time of rhodamine B in mice. In addition, histological examinations of puncture sites of the skin tissues confirm the complete recovery of skin and excellent biocompatibility of HA-MNs.

The Design Methodology of Fully Digital Pulse Width Modulation

This paper describes the design methodology and calibration technique for a low-power digital pulse width modulation demodulator to enhance its robustness against the process, voltage, and temperature variations in different process corners, in addition to intra-die variability, which makes it a very good choice for implantable monitoring sensors. Furthermore, the core of the proposed demodulator is fully digital. Thus, along with the proposed design methodology, the proposed demodulator can be simply redesigned in advanced subnanometer CMOS technologies without much difficulty as compared to analog demodulators. The proposed demodulator consists of an envelope detector, a digitizer, a ring oscillator, and a data detector with digital calibration. All the proposed circuits are designed and simulated in the standard 1P9M TSMC’s 40 nm CMOS technology. Simulation results have shown that the circuit is capable of demodulating and recovering data from an input signal with a carrier frequency of 13.56 MHz and a data rate of 143 kB/s with an average power consumption of 5.62 μW.

Cross-Linking-Density-Changeable Microneedle Patch Prepared from a Glucose-Responsive Hydrogel for Insulin Delivery

To simplify the preparation process of a glucose-responsive microneedle patch, a cross-linking-density changeable microneedle patch was designed. The microneedle patch was made up of a hydrogel formed by phenylboronic acid-grafted polyallylamine and poly(vinyl alcohol) (PVA). The gel was cross-linked by boronate ester bonds between phenylboronic acid groups and PVA. It still had fluidity and could be filled into a mold to prepare microneedle patches. Moreover, insulin could be directly loaded into the microneedle patch by mixing with the gel. The boronate ester bond would be broken in the presence of glucose, resulting in a decrease in the cross-linking density. Therefore, the gel could achieve a greater swelling degree and insulin could be released faster. In addition, PVA chains were crystallized by repeatedly freezing and thawing to improve the mechanical strength of the microneedle patch. In terms of glucose-dependent insulin release, the gel showed good glucose-responsive insulin-release ability. Through additional ion cross-linking, the microneedle patch could also control the insulin release according to glucose concentration. In the hypoglycemic experiment of diabetic rats, the microneedle patch effectively pierced the skin and slowly released insulin.

Therapeutics for type-2 diabetes mellitus: a glance at the recent inclusions and novel agents under development for use in clinical practice

Diabetes mellitus (DM) is a chronic, progressive, and multifaceted illness resulting in significant physical and psychological detriment to patients. As of 2019, 463 million people are estimated to be living with DM worldwide, out of which 90% have type-2 diabetes mellitus (T2DM). Over the years, significant progress has been made in identifying the risk factors for developing T2DM, understanding its pathophysiology and uncovering various metabolic pathways implicated in the disease process. This has culminated in the implementation of robust prevention programmes and the development of effective pharmacological agents, which have had a favourable impact on the management of T2DM in recent times. Despite these advances, the incidence and prevalence of T2DM continue to rise. Continuing research in improving efficacy, potency, delivery and reducing the adverse effect profile of currently available formulations is required to keep pace with this growing health challenge. Moreover, new metabolic pathways need to be targeted to produce novel pharmacotherapy to restore glucose homeostasis and address metabolic sequelae in patients with T2DM. We searched PubMed, MEDLINE, and Google Scholar databases for recently included agents and novel medication under development for treatment of T2DM. We discuss the pathophysiology of T2DM and review how the emerging anti-diabetic agents target the metabolic pathways involved. We also look at some of the limiting factors to developing new medication and the introduction of unique methods, including facilitating drug delivery to bypass some of these obstacles. However, despite the advances in the therapeutic options for the treatment of T2DM in recent years, the industry still lacks a curative agent.

Needle-free iontophoresis-driven β-adrenergic sweat rate test

OBJECTIVES

Two CFTR-dependent β-adrenergic sweat rate tests applying intradermal drug injections were reported to better define diagnosis and efficacy of CFTR-directed therapies. The aim of this work was to develop and test a needle-free image-based test and to provide an accurate analysis of the responses.

METHODS

The modified method was conducted by applying two successive iontophoresis sessions using the Macroduct device. Efficiency of drug delivery was tested by evaporimetry. Cholinergically stimulated sweating was evoked by pilocarpine iontophoresis. β-adrenergically stimulated sweating was obtained by iontophoresis of isoproterenol and aminophylline in the presence of atropine and ascorbic acid. A nonlinear mixed-effects (NLME) approach was applied to model volumes of sweat and subject-specific effects displaying inter- and intra-subject variability.

RESULTS

Iontophoresis provided successful transdermal delivery of all drugs, including almost neutral isoproterenol and aminophylline. Pilocarpine was used at a concentration ∼130-times lower than that used in the classical Gibson and Cooke sweat test. Addition of ascorbic acid lowered the pH of the solution, made it stable, prevented isoproterenol degradation and promoted drug iontophoresis. Maximal secretory capacity and kinetic rate of β-adrenergic responses were blunted in CF. A cutoff of 5.2 minutes for ET50, the time to reach the half maximal secretion, discriminated CF from controls with a 100% sensitivity and specificity. Heterozygous showed an apparently reduced kinetic rate and a preserved secretory capacity.

CONCLUSION

We tested a safe, well-tolerated needle-free image-based sweat test potentially applicable in children. Modelling responses by NLME allowed evaluating metrics of CFTR-dependent effects reflecting secretory capacity and kinetic rate.

Accelerating transdermal delivery of insulin by ginsenoside nanoparticles with unique permeability

Diabetes is a metabolic disease caused by insufficient insulin secretion, action or resistance, in which insulin plays an irreplaceable role in the its treatment. However, traditional administration of insulin requires continuous subcutaneous injections, which is accompanied by inevitable pain, local tissue necrosis and hypoglycemia. Herein, a green and safe nanoformulation with unique permeability composed of insulin and ginsenosides is developed for transdermal delivery to reduce above-mentioned side effects. The ginsenosides are self-assembled to form shells to protect insulin from hydrolysis and improve the stability of nanoparticles. The nanoparticles can temporarily permeate into cells in 5 min and promptly excrete from the cell for deeper penetration. The insulin permeation is related to the disorder of stratum corneum lipids caused by ginsenosides. The skin acting as drug depot mantains the nanoparticles released continuously, therefore the body keeps euglycemic for 48 h. Encouraged by its long-lasting and effective transdermal therapy, ginsenosides-based nano-system is expected to deliver other less permeable drugs like proteins and peptides and benefit those who are with chronic diseases that need long-term medication.

Wearable patch delivery system for artificial pancreas health diagnostic-therapeutic application: A review

The advanced stimuli-responsive approaches for on-demand drug delivery systems have received tremendous attention as they have great potential to be integrated with sensing and multi-functional electronics on a flexible and stretchable single platform (all-in-one concept) in order to develop skin-integration with close-loop sensation for personalized diagnostic and therapeutic application. The wearable patch pumps have evolved from reservoir-based to matrix patch and drug-in-adhesive (single-layer or multi-layer) type. In this review, we presented the basic requirements of an artificial pancreas, surveyed the design and technologies used in commercial patch pumps available on the market and provided general information about the latest wearable patch pump. We summarized the various advanced delivery strategies with their mechanisms that have been developed to date and representative examples. Mechanical, electrical, light, thermal, acoustic and glucose-responsive approaches on patch form have been successfully utilized in the controllable transdermal drug delivery manner. We highlighted key challenges associated with wearable transdermal delivery systems, their research direction and future development trends.