Synergistic Mechanisms Underlie the Peroxide and Coagent Improvement of Natural-Rubber-Toughened Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Mechanical Performance

Maleation of Biodegradable Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Reactive Extrusion: Effect of Initiator Concentration and a Chain Extender on Grafting Percentage and Thermal and Rheological Properties

Recently, there has been immense interest in using biodegradable polymers to replace petro-derived polymers. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), which is gaining popularity due to its biodegradability, is used in developing blends and composites for a variety of applications. To enhance the miscibility between different components of a material with PHBV, functionalization of the PHBV chain can be done. In this study, grafting of maleic anhydride (MA) onto PHBV was performed using organic peroxide also, called Luperox [2,5-dimethyl-2,5-di(tert-butylperoxy)hexane], as an initiator. The effects of different initiator and MA concentrations on the grafting percentage, gel content, rheology, and thermal properties were evaluated. Additionally, a chain extender (Joncryl ADR 4468) was added during the grafting process to prevent chain scission of PHBV during processing and to promote long-chain branching. Higher initiator concentrations played a significant role in increasing the grafting percentage. Adding the chain extender further enhanced the grafting percentage of the compatibilizers. Compatibilizers with chain extenders increased the grafting percentage by up to 91% compared with their counterparts without chain extenders. Differential scanning calorimetry analysis demonstrated that the melting temperature of the compatibilizers decreased by up to 8 °C with increasing initiator concentration. Furthermore, the thermal stability of maleic anhydride grafted PHBV (MA-g-PHBV) reduced at higher initiator content, likely attributed to the formation of low-molecular-weight species during processing. The maleated PHBV with a chain extender exhibited improved thermal stability, with an increase of up to 6 °C, attributed to an increase in molecular weight because of the chain extender. This can be corroborated by the rheological studies, which showed higher viscosity, particularly for MA-g-PHBV with chain extender. Therefore, this is the first ever scientific study to improve and analyze the grafting percentage of MA-g-PHBV using a combination of chain extender and varying initiator concentrations. This maleated PHBV with a higher grafting percentage will then facilitate the development of composites and blends with improved performance, even at low MA-g-PHBV concentrations.

Addition of Coffee Waste-Derived Plasticizer Improves Processability and Barrier Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)-Natural Rubber Bioplastic

This study aimed to develop a value-added bio-based polymer product for food packaging. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a promising bioplastic with limitations in processability and brittleness, which our group previously addressed by incorporating high-molecular-weight natural rubber (NR) compatibilized with peroxide and coagent. Yet, processability in an industrial setting proved difficult. Coffee oil epoxide (COE), a waste-derived plasticizer, was incorporated into the PHBV/NR/peroxide/coagent matrix via extrusion, and properties of resulting sheets were evaluated. COE incorporation significantly decreased the oxygen and water permeability of the PHBV/NR sheets. Maximum degradation temperature Tpeak (°C) increased by ~4.6 °C, and degree of crystallinity decreased by ~15.5% relative to pristine PHBV, indicating good thermal stability. Melting (Tm) and glass transition temperatures (Tg) of the PHBV/NR blend remained unchanged with COE incorporation. X-ray diffraction (XRD) revealed ~10.36% decrease in crystal size for the plasticized blend. Energy-dispersive X-ray analysis (EDAX) and scanning electron microscopy (SEM) confirmed good dispersion with no phase separation. The water uptake capacity of the plasticized blend was reduced by 61.02%, while surface contact angle measurements showed improved water resistance. The plasticized PHBV sheet shows promise for environmentally friendly packaging films due to its high thermal stability, effective barrier properties, and industrial scalability.

Sulfur and Peroxide Vulcanization of the Blends Based on Styrene-Butadiene Rubber, Ethylene-Propylene-Diene Monomer Rubber and Their Combinations

Rubber blends based on styrene-butadiene rubber, ethylene-propylene-diene monomer rubber and a combination of both rubbers were cured with different sulfur and peroxide curing systems. In sulfur curing systems, two type of accelerators, namely tetramethylthiuram disulfide, N-cyclohexyl-2-benzothiazole sulfenamide, and combinations of both accelerators were used. In peroxide curing systems, dicumyl peroxide, and a combination of dicumyl peroxide with zinc diacrylate or zinc dimethacrylate, respectively, were applied. The work was aimed at investigating the effect of curing systems composition as well as the type of rubber or rubber combinations on the curing process, cross-link density and physical-mechanical properties of vulcanizates. The dynamic mechanical properties of the selected vulcanizates were examined too. The results revealed a correlation between the cross-link density and physical-mechanical properties. Similarly, there was a certain correlation between the cross-linking degree and glass transition temperature. The tensile strength of vulcanizates based on rubber combinations was higher when compared to that based on pure rubbers, which points out the fact that in rubber combinations, not only are the features of both elastomers combined, but improvement in the tensile characteristics can also be achieved. When compared to vulcanizates cured with dicumyl peroxide, materials cured with a sulfur system exhibited higher tensile strength. With the application of co-agents in peroxide vulcanization, the tensile strength overcame the tensile behavior of sulfur-cured vulcanizates.

Combined Sulfur and Peroxide Vulcanization of Filled and Unfilled EPDM-Based Rubber Compounds

The sulfur curing system, peroxide curing system and their combinations were applied for the cross-linking of unfilled and carbon black-filled rubber formulations based on ethylene-propylenediene-monomer rubber. The results demonstrated that the type of curing system influenced the course and shape of curing isotherms. This resulted in the change of curing kinetics of rubber compounds. The cross-link density of materials cured with combined vulcanization systems was lower than that for vulcanizates cured with the peroxide or sulfur system. Good correlation between the cross-link density as well as the structure of the formed cross-links and physical-mechanical characteristics of the cured materials was established. Both filled and unfilled vulcanizates cured with combined vulcanization systems exhibited a higher tensile strength and elongation at break when compared to their equivalents vulcanized in the presence of the peroxide or sulfur curing system. It can be stated that by proper combination of vulcanization systems, it is possible to modify the tensile behavior of vulcanizates in a targeted manner. On the other side, dynamical-mechanical properties were found not be significantly influenced by the curing system composition.

Bio-Polyester/Rubber Compounds: Fabrication, Characterization, and Biodegradation

Biobased and biodegradable polymers (BBDs) such as poly(3-hydroxy-butyrate), PHB, and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) are considered attractive alternatives to fossil-based plastic materials since they are more environmentally friendly. One major problem with these compounds is their high crystallinity and brittleness. In order to generate softer materials without using fossil-based plasticizers, the suitability of natural rubber (NR) as an impact modifier was investigated in PHBV blends. Mixtures with varying proportions of NR and PHBV were generated, and samples were prepared by mechanical mixing (roll mixer and/or internal mixer) and cured by radical C-C crosslinking. The obtained specimens were investigated with respect to their chemical and physical characteristics, applying a variety of different methods such as size exclusion chromatography, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermal analysis, XRD, and mechanical testing. Our results clearly indicate that NR-PHBV blends exhibit excellent material characteristics including high elasticity and durability. Additionally, biodegradability was tested by applying heterologously produced and purified depolymerases. pH shift assays and morphology analyses of the surface of depolymerase-treated NR-PHBV through electron scanning microscopy confirmed the enzymatic degradation of PHBV. Altogether, we prove that NR is highly suitable to substitute fossil-based plasticizers; NR-PHBV blends are biodegradable and, hence, should be considered as interesting materials for a great number of applications.

Enhancing impact resistance and biodegradability of PHBV by melt blending with ENR

This research aims to enhance the mechanical characteristics of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by using epoxidized natural rubber (ENR-25 and ENR-50) as a toughening agent and polybutadiene (PB) grafted with maleic anhydride (MA) (3 MA groups/chain) as a compatibilizer. The PHBV/ENR blends were mixed in 100/0, 90/10, 80/20, and 70/30 with PB-g-MA at 0, 5, and 10% (wt./wt.), using an internal mixer set to 175 °C with a rotor speed of 50 rpm. The findings indicated that at 70/30 PHBV/ENR composition, the impact strength of the blends with 25 and 50 epoxide contents were the greatest at 6.92 ± 0.35 J m^-1 and 7.33 ± 1.19 J m^-1, respectively, which are about two times greater than that of neat PHBV. Furthermore, the biodegradability of the PHBV/ENR blends was more substantial than that of neat PHBV, showing a mass reduction of approximately 40% and 45% for PHBV/ENR-25 and PHBV/ENR-50, respectively. In comparison, while the mass loss of PHBV was approximately 37% after three months of soil burial. The results indicate that ENR improves the toughness of the blends while simultaneously increasing PHBV degradation, which could pave the way for broadening PHBV for sustainability purposes.

In Service Performance of Toughened PHBV/TPU Blends Obtained by Reactive Extrusion for Injected Parts

Moving toward a more sustainable production model based on a circular economy, biopolymers are considered as one of the most promising alternatives to reduce the dependence on oil-based plastics. Polyhydroxybutyrate-co-valerate (PHBV), a bacterial biopolyester from the polyhydroxialkanoates (PHAs) family, seems to be an attractive candidate to replace commodities in many applications such as rigid packaging, among others, due to its excellent overall physicochemical and mechanical properties. However, it presents a relatively poor thermal stability, low toughness and ductility, thus limiting its applicability with respect to other polymers such as polypropylene (PP). To improve the performance of PHBV, reactive blending with an elastomer seems to be a proper cost-effective strategy that would lead to increased ductility and toughness by rubber toughening mechanisms. Hence, the objective of this work was the development and characterization of toughness-improved blends of PHBV with thermoplastic polyurethane (TPU) using hexamethylene diisocyanate (HMDI) as a reactive extrusion agent. To better understand the role of the elastomer and the compatibilizer, the morphological, rheological, thermal, and mechanical behavior of the blends were investigated. To explore the in-service performance of the blends, mechanical and long-term creep characterization were conducted at three different temperatures (−20, 23, 50 °C). Furthermore, the biodegradability in composting conditions has also been tested. The results showed that HMDI proved its efficiency as a compatibilizer in this system, reducing the average particle size of the TPU disperse phase and enhancing the adhesion between the PHBV matrix and TPU elastomer. Although the sole incorporation of the TPU leads to slight improvements in toughness, the compatibilizer plays a key role in improving the overall performance of the blends, leading to a clear improvement in toughness and long-term behavior.

Application of Sulfur and Peroxide Curing Systems for Cross-Linking of Rubber Composites Filled with Calcium Lignosulfonate

Calcium lignosulfonate in different loadings was applied to the rubber matrix based on EPDM. A sulfur curing system, organic peroxide, and a combination of organic peroxide with two coagent types were used for cross-linking of rubber compounds. The work was focused on the investigation of filler content and curing system composition in the curing process, cross-link density, morphology, and physical–mechanical properties of composites. The achieved results demonstrated that the curing parameters of rubber compounds cured with the sulfur system were significantly different from those cured with peroxide systems. There was also an observed different influence of curing systems composition on cross link density, though in all cases, the degree of cross-linking showed a decreasing trend with increasing content of lignosulfonate. The tensile strength of the composites cured with sulfur system and organic peroxide was comparable, regardless of lignosulfonate loading. This points to the application of both curing systems in cross-linking of rubber compounds with biopolymer filler. However, the introduction of coagents in peroxide vulcanization led to the improvement of adhesion and compatibility between the rubber and the filler on the filler–rubber interface. This subsequently resulted in the improvement of the tensile characteristics of composites. The introduction of organic peroxide in combination with coagent seems to be a very simple and efficient way for the preparation of biopolymer-filled composites with applicable physical–mechanical properties.

A Critical Review on the Economically Feasible and Sustainable Poly(3-Hydroxybutyrate-co-3-hydroxyvalerate) Production from Alkyl Alcohols

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)) is the most studied short-chain-length polyhydroxyalkanoates (PHA) with high application importance in various fields. The domination of high-cost propionate and valerate over other 3-hydroxyvalerate (3HV) precursors owing to their wide preference among PHA-producing bacteria has hindered the development of diverse production processes. As alkyl alcohols are mainly produced from inexpensive starting materials through oxo synthesis, they contribute a cost-effective advantage over propionate and valerate. Moreover, alkyl alcohols can be biosynthesized from natural substrates and organic wastes. Despite their great potential, their toxicity to most PHA-producing bacteria has been the major drawback for their wide implementation as 3HV precursors for decades. Although the standard PHA-producing bacteria Cupriavidus necator showed promising alcohol tolerance, the 3HV yield was discouraging. Continuous discovery of alkyl alcohols-utilizing PHA-producing bacteria has enabled broader choices in 3HV precursor selection for diverse P(3HB-co-3HV) production processes with higher economic feasibility. Besides continuous effort in searching for promising wild-type strains, genetic engineering to construct promising recombinant strains based on the understanding of the mechanisms involved in alkyl alcohols toxicity and tolerance is an alternative approach. However, more studies are required for techno-economic assessment to analyze the economic performance of alkyl alcohol-based production compared to that of organic acids.

Electrospun Coaxial Fibers to Optimize the Release of Poorly Water-Soluble Drug

In a drug delivery system, the physicochemical properties of the polymeric matrix have a positive impact on the bioavailability of poorly water-soluble drugs. In this work, monolithic F1 fibers and coaxial F2 fibers were successfully prepared using polyvinylpyrrolidone as the main polymer matrix for drug loading and the poorly water-soluble curcumin (Cur) as a model drug. The hydrophobic poly (3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV) was designed as a blank layer to change the hydrophilicity of the fiber and restrain the drug dissolution rate. The curved linear morphology without beads of F1 fibers and the straight linear morphology with few spindles of F2 fibers were characterized using field-emission environmental scanning electron microscopy. The amorphous forms of the drug and its good compatibility with polymeric matrix were verified by X-ray diffraction and attenuated total reflectance Fourier transformed infrared spectroscopy. Surface wettability and drug dissolution data showed that the weaker hydrophilicity F2 fibers (31.42° ± 3.07°) had 24 h for Cur dissolution, which was much longer than the better hydrophilic F1 fibers (15.31° ± 2.79°) that dissolved the drug in 4 h.

Thermal and Barrier Characterizations of Cellulose Esters with Variable Side-Chain Lengths and Their Effect on PHBV and PLA Bioplastic Film Properties

Cellulose esters (CEs) are promising biodegradable substitutes for traditional petroleum-based plastic materials. Research on structure-property relationships of CEs is necessary to evaluate their suitability for industrial applications such as food packaging. Cellulose esters with different side-chain lengths were synthesized and studied. Their thermal and moisture barrier properties were characterized. Cellulose triheptanoate (CTH) was proved to have an optimal moisture barrier (WVTR = 0.31 g·mil/day/in.²) and was used to blend with poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and polylactic acid (PLA) bioplastics. CTH addition improved the PLA thermal stability, enhanced the ductility, and increased the moisture barrier by 32%, while it decreased the PHBV thermal stability, weakened the ductility, and reduced the moisture barrier by 90%. We demonstrated that by proper choice of the combination of CE and bioplastic, bioplastic blends with unique and useful synergistic properties can be obtained. These blends can potentially be used for commercial applications, such as biodegradable flexible packaging.

GTR/NBR/Silica Composites Performance Properties as a Function of Curing System: Sulfur versus Peroxides

In this work, conventional sulfur and two types of organic peroxides (dicumyl peroxide (DCP) and di-(2-tert-butyl-peroxyisopropyl)-benzene (BIB)) curing systems were used to investigate the possibility for tailoring of the performance properties of GTR/NBR blends reinforced with a variable content of highly dispersive silica (0-30 phr). The curing characteristics, static mechanical and acoustical properties, swelling behavior, thermal stability, and microstructure of the prepared composites were investigated. The results show that regardless of the curing system used, increasing the content of highly dispersive silica resulted in the improvement of the mechanical properties of the studied materials. It was observed that sulfur-based systems are the best choice in terms of cross-linking efficiency determined based on torque increment and cross-link density parameters. However, further analysis of the physico-mechanical properties indicated that the cross-linking efficiency does not match the performance of specimens, and the materials obtained using organic peroxides show higher tensile properties. This is due to the improved physical interactions between the GTR/NBR matrix and highly dispersive silica when using peroxide systems. It was confirmed using the analysis of the Wolff activity coefficient, indicating the enhanced synergy.

Green Composites from a Bioplastic Blend of Poly(3-hyroxybutyrate-co-3-hydroxyvalerate) and Carbon Dioxide-Derived Poly(propylene carbonate) and Filled with a Corn Ethanol-Industry Co-product

Sustainable green composites were engineered from distillers' dried grains with solubles (DDGS), a co-product from the corn ethanol industry as a sustainable filler in bioplastic matrices made from a carbon dioxide-derived poly(propylene carbonate) (PPC) and poly(3-hyroxybutyrate-co-3-hydroxyvalerate) (PHBV) blend. The effect of water-washed DDGS (15 and 25 wt %) on the properties of injection-molded green composites from PHBV/PPC blends (60/40) and (40/60) and DDGS without and with peroxide (0.5 phr) has been investigated. From the results, it was noticed that the glass transition temperature (T _g) of the PHBV/PPC (60/40) bioplastic matrix increased by ∼9.6 °C by adding a peroxide cross-linking agent, indicating significant interaction (linkage) between PHBV and PPC polymers in this particular composition ratio, which was supported by SEM analysis as no phase separation was observed between PHBV and PPC. The tensile modulus of PHBV/PPC (60/40) and PHBV/PPC (40/60) blends with peroxide was improved by ∼40.7 and 1.5% after the addition of 25 wt % DDGS, respectively, due to its fibrous flaky structure. The % elongation values at break of the PHBV/PPC (60/40) blend matrices with and without peroxide were drastically improved by 18.5 and 90.7 folds, respectively, as compared to that of brittle pristine PHBV.

Value-Added Use of Invasive Plant-Derived Fibers as PHBV Fillers for Biocomposite Development

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a promising biobased, biodegradable thermoplastic with limited industrial applications due to its brittleness and high cost. To improve these properties, lignocellulosic fibers from two invasive plants (Phalaris arundinacea and Lonicera japonica) were used as PHBV reinforcing agents. Alkali treatment of the fibers improved the PHBV-fiber interfacial bond by up to 300%. The morphological, mechanical, and thermal properties of the treated fibers were characterized, as well as their size, loading, and type, to understand their impact on performance of the biocomposites. The new biocomposites had improved thermal stability, restricted crystallization, reduced rigidity, and reduced cost compared with PHBV. Additionally, these novel biocomposites performed similarly to conventional plastics such as polypropylene, suggesting their potential as bio-alternatives for industrial applications such as semirigid packaging and lightweight auto body panels.