Core-Shell Molecularly Imprinted Polymers on Magnetic Yeast for the Removal of Sulfamethoxazole from Water

Surface coupling of molecularly imprinted polymers as strategy to improve sulfamethoxazole removal from water by carbons produced from spent brewery grain

This work aims to assess the surface coupling of molecularly imprinted polymers (MIP) on carbon adsorbents produced from spent brewery grain, namely biochar (BC) and activated carbon (AC), as a strategy to improve selectivity and the adsorptive removal of the antibiotic sulfamethoxazole (SMX) from water. BC and AC were produced by microwave-assisted pyrolysis, and MIP was obtained by fast bulk polymerization. Two different methodologies were used for the molecular imprinting of BC and AC, the resulting materials being tested for SMX adsorption. Then, after selecting the most favourable molecular imprinting methodology, different mass ratios of MIP:BC or MIP:AC were used to produce and evaluate eight different materials. Molecular imprinting was shown to significantly improve the performance of BC for the target application, and one of the produced composites (MIP1-BC-s(1:3)) was selected for further kinetic and equilibrium studies and comparison with individual MIP and BC. The kinetic behaviour was properly described by both the pseudo-first and pseudo-second order models. Regarding equilibrium isotherms, they fitted the Freundlich and Langmuir models, with MIP1-BC-s(1:3) reaching a maximum adsorption capacity (qm) of 25 ± 1 μmol g-1, 19 % higher than BC. In comparison with other seven pharmaceuticals, the adsorption of SMX onto MIP1-BC-s(1:3) was remarkably higher, as for the specific recognition of this antibiotic by the coupled MIP. The pH study evidenced that SMX removal was higher under acidic conditions. Regeneration experiments showed that MIP1-BC-s(1:3) provided good adsorption performance, which was stable during five regeneration-reutilization cycles. Overall, this study has demonstrated that coupling with MIP may be a suitable strategy to improve the adsorption properties and performance of biochar for antibiotics removal from water, increasing its suitability for practical applications.

Evaluation of different functionalization methodologies for improving the removal of three target antibiotics from wastewater by a brewery waste activated carbon

This work aims to increase the efficiency of an activated carbon produced from brewery waste (AC) in the removal of three target antibiotics (sulfamethoxazole (SMX), trimethoprim (TMP), and ciprofloxacin (CIP)) by surface incorporation of oxygen, nitrogen or sulfur groups. AC was produced using spent brewery grains (the most abundant waste from the brewing industry) as raw material, K2CO3 as activating agent and microwave energy for pyrolysis. Then, seven different functionalized AC were prepared, characterized for their physicochemical properties, and tested for adsorption (%) of SMX, TMP and CIP from three different matrices (ultrapure water (pH ~5-6), buffered ultrapure water (pH 8), and effluent from a municipal wastewater treatment plant (WWTP effluent (pH 8)), under batch operation. Based on the obtained results, an oxygen functionalized AC was selected for further characterization and studies on the adsorption of the target antibiotics from the WWTP effluent. Kinetic results fitted the pseudo-second order model and the equilibrium isotherms were adequately described by the Langmuir model, reaching maximum adsorption capacities (qm) of 124 ± 1 μmol g-1, 315 ± 2 μmol g-1 and 201 ± 5 μmol g-1 for SMX, TMP and CIP, respectively. The selected functionalization increased qm by up to 58 % in comparison with the non-functionalized AC. The oxygen modified AC produced from a biomass waste remarkably improved its performance for an efficient application in the removal of antibiotics from wastewater.

Molecularly Imprinted Polymers Using Yeast as a Supporting Substrate

Molecularly imprinted polymers (MIPs) have gained significant attention as artificial receptors due to their low cost, mild operating conditions, and excellent selectivity. To optimize the synthesis process and enhance the recognition performance, various support materials for molecular imprinting have been explored as a crucial research direction. Yeast, a biological material, offers advantages such as being green and environmentally friendly, low cost, and easy availability, making it a promising supporting substrate in the molecular imprinting process. We focus on the preparation of different types of MIPs involving yeast and elaborate on the specific roles it plays in each case. Additionally, we discuss the advantages and limitations of yeast in the preparation of MIPs and conclude with the challenges and future development trends of yeast in molecular imprinting research.

In situ synthesis and dynamic simulation of molecularly imprinted polymeric nanoparticles on a micro-reactor system

Current practices in synthesizing molecularly imprinted polymers face challenges-lengthy process, low-productivity, the need for expensive and sophisticated equipment, and they cannot be controlled in situ synthesis. Herein, we present a micro-reactor for in situ and continuously synthesizing trillions of molecularly imprinted polymeric nanoparticles that contain molecular fingerprints of bovine serum albumin in a short period of time (5-30 min). Initially, we performed COMSOL simulation to analyze mixing efficiency with altering flow rates, and experimentally validated the platform for synthesizing nanoparticles with sizes ranging from 52-106 nm. Molecular interactions between monomers and protein were also examined by molecular docking and dynamics simulations. Afterwards, we benchmarked the micro-reactor parameters through dispersity and concentration of molecularly imprinted polymers using principal component analysis. Sensing assets of molecularly imprinted polymers were examined on a metamaterial sensor, resulting in 81% of precision with high selectivity (4.5 times), and three cycles of consecutive use. Overall, our micro-reactor stood out for its high productivity (48-288 times improvement in assay-time and 2 times improvement in reagent volume), enabling to produce 1.4-1.5 times more MIPs at one-single step, and continuous production compared to conventional strategy.

3D porous carbon-embedded nZVI@Fe2O3 nanoarchitectures enable prominent performance and recyclability in antibiotic removal

Overcoming the instability and poor recyclability during the practical applications of contaminant scavengers is a challenging topic. Herein, a three-dimensional (3D) interconnected carbon aerogel (nZVI@Fe₂O₃/PC) embedding a core-shell nanostructure of nZVI@Fe₂O₃ was elaborately designed and fabricated via an in-situ self-assembly process. The porous carbon with 3D network architecture exhibits strong adsorption towards various antibiotic contaminants in water, where the stably embedded nZVI@Fe₂O₃ nanoparticles not only serve as magnetic seeds for recycling, but also avoid the shedding and oxidation of nZVI in the adsorption process. As a result, nZVI@Fe₂O₃/PC efficiently captures sulfamethoxazole (SMX), sulfamethazine (SMZ), ciprofloxacin (CIP), tetracycline (TC) and other antibiotics in water. In particular, an excellent adsorptive removal capacity of 329 mg g^-1 and a rapid capture kinetics (99% of removal efficiency in 10 min) under a wide pH adaptability (2-8) are achieved using nZVI@Fe₂O₃/PC as an SMX scavenger. nZVI@Fe₂O₃/PC displays exceptional long-term stability given that it shows excellent magnetic property after it is stored in water solution for 60 d, making it an ideal stable scavenger for contaminants in an etching-resistant and efficient manner. This work would also provide a general strategy to develop other stable iron-based functional architectures for efficient catalytic degradation, energy conversion and biomedicine.

Ultrahigh sorption of sulfamethoxazole by potassium hydroxide-modified biochars derived from bean-worm skin waste

Food processing of bean worm generates copious amount of skin as solid waste posing a serious environmental concern. The present study utilized bean worm skin (BWS) waste to produce KOH-modified biochars (KBWS-BCs) for the removal of sulfamethoxazole (SMX) from aqueous solution for the first time. Characterization of KBWS-BCs was systematically investigated via multiple instrumental analysis techniques. The sorption performance of KBWS-BCs as a function of solution pH, reaction time, initial SMX concentration, and reaction temperature was investigated using batch experiments. The classic kinetics and isotherm models were employed to fit the sorption data. KBWS-BCs exhibited large surface areas (3331-4742 m² g^-1) and ultrahigh sorption performance for SMX (maximum adsorption capacities of 909-2000 mg g^-1), which were comparable to those of other modified biochars and even those of well-designed materials. Thermodynamic study indicated that the sorption of SMX on KBWS-BCs was a spontaneous (△G° < 0) and exothermic (△H° < 0) process. Mechanism analysis showed that both chemisorption and physisorption were responsible for the adsorption of SMX by KBWS-BCs. Overall, recycling BWS for preparation of high-performance biochars can be a "win-win" strategy for both disposal of BWS and removal of SMX from wastewater.

Surface imprinted polymer on a metal-organic framework for rapid and highly selective adsorption of sulfamethoxazole in environmental samples

The demand for the removal of pollutants in aqueous solution has triggered extensive studies to optimize the performance of adsorbents, but the adsorption rate and selectivity of adsorbents have been overlooked. Hierarchically ordered porous vinyl-functionalized UIO-66 was used as supporter to prepare a surface molecular imprinted polymer (MIP-IL@UIO-66). The UIO-66 with large specific surface area significantly increased the number of active site of polymer, and so the MIP-IL@UIO-66 can achieve the rapid and highly selective adsorption of sulfamethoxazole (SMZ) in water. The structure and morphology of MIP-IL@UIO-66 was examined using scanning electron microscopy, Fourier transform infrared spectroscopy, nitrogen adsorption-desorption isotherms, thermogravimetry, X-ray photoelectron spectroscopy, and X-ray powder diffraction. Results indicate that the presented MIP-IL@UIO-66 has an ultrafast equilibrium rate (equilibrium time, 10 min), large adsorption capability (maximum capacity, 284.66 mg g^-1), excellent adsorption selectivity (selectivity coefficient, 11.36), and good reusability (number of cycles, 5 times) via equilibrium adsorption experiments. Subsequently, as a novel solid phase extraction (SPE) adsorbent, the adsorption performance of SMZ onto MIP-IL@UIO-66 was better than that of a commercial SPE adsorbent. A MISPE column combined with high-performance liquid chromatography (HPLC) was presented to detect SMZ in water, soil, egg, and pork samples with recoveries of 91-106%. Hydrogen bonds, electrostatic and π-π interactions, and molecular memory were attributed to recognizing the SMZ of MIP-IL@UIO-66.

Selective Recognition of Gallic Acid Using Hollow Magnetic Molecularly Imprinted Polymers with Double Imprinting Surfaces

Gallic acid is widely used in the field of food and medicine due to its diversified bioactivities. The extraction method with higher specificity and efficiency is the key to separate and purify gallic acid from complex biological matrix. Herein, using self-made core-shell magnetic molecularly imprinted polymers (MMIP) with gallic acid as template, a hollow magnetic molecularly imprinted polymer (HMMIP) with double imprinting/adsorption surfaces was prepared by etching the mesoporous silica intermediate layer of MMIP. The characterization and adsorption research showed that the HMMIP had larger specific surface area, higher magnetic response strength and a more stable structure, and the selectivity and saturated adsorption capacity (2.815 mmol/g at 318 K) of gallic acid on HMMIP were better than those of MMIP. Thus, in addition to MMIP, the improved HMMIP had excellent separation and purification ability to selectively extract gallic acid from complex matrix with higher specificity and efficiency.

A descriptive and comparative analysis on the adsorption of PPCPs by molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) have aroused great attention as a new material for the removal or detection of pharmaceuticals and personal care products (PPCPs). However, it is not clear about the superiority and deficiency of MIPs in the process of removing or detecting PPCPs. Herein, we evaluated the performance of MIPs in the aspects of adsorption capacity, binding affinity, adsorption rate, and compatibility to other techniques, and proposed ways to improve its performance. Without regard to the selectivity of MIPs, for the PPCPs adsorption, MIPs surprisingly did not always perform better than the conventional adsorbents (non-imprinted polymers, biochar, activated carbon and resin), indicating that MIPs should be used where selectivity is crucial, for example recovery of specific PPCPs in an environmental sample extraction process. Compared to the traditional solid-phase extraction for PPCPs detection pretreatment, the usage of MIPs as substitute extraction agents could obtain high selectivity of specific substance, due to the uniformity and effectiveness of the specific sites. A promising development in the future would be to combine other simple and rapid quantitative technologies, such as electro/photochemical sensor and catalytic degradation, to realize rapid and sensitive detection of trace PPCPs.

Magnetic molecularly imprinted polymer for the simultaneous selective extraction of phenoxy acid herbicides from environmental water samples

A selective magnetic molecularly imprinted polymer (MMIP) was synthetized with 4-chloro-2-methylphenoxyacetic acid as template and 4-vinylpiridine as monomer in presence of vinylized magnetite nanoparticles. Scanning electron microscopy, nitrogen adsorption-desorption isotherms, Fourier transform infrared spectrometry and vibrating sample magnetometry were applied to characterize the resulting material. The synthesized MMIP was applied as sorbent in magnetic molecularly imprinted solid-phase extraction (MMISPE) for selective extraction of a mixture of the five herbicides 4-chloro-2-methylphenoxyacetic acid (MCPA), 4-(4-chloro-2-methylphenoxy)butyric acid (MCPB), mecoprop (MCPP), fenoxaprop (FEN) and haloxyfop (HAL). Several parameters affecting the extraction conditions were optimized to achieve the best extraction performance. The best MMISPE combined with HPLC-DAD gave detection and quantification limits between 0.33 and 0.71 μg L^-1 and 1.1-2.4 μg L^-1, respectively, were obtained. The precision of the whole method provided RSD values below 7.3%, and the accuracy was demonstrated by the analysis of several water samples of different origins, with recoveries ranged from 77 to 98%. Moreover, a remarkable re-usability of the MMIP sorbent, more than 65 uses without losses in extraction capacity, was obtained.

Smart Adsorbents for Aquatic Environmental Remediation

A noticeable interest and steady rise in research studies reporting the design and assessment of smart adsorbents for sequestering aqueous metal ions and xenobiotics has occurred in the last decade. This motivates compiling and reviewing the characteristics, potentials, and performances of this new adsorbent generation's metal ion and xenobiotics sequestration. Herein, stimuli-responsive adsorbents that respond to its media (as internal triggers; e.g., pH and temperature) or external triggers (e.g., magnetic field and light) are highlighted. Readers are then introduced to selective adsorbents that selectively capture materials of interest. This is followed by a discussion of self-healing and self-cleaning adsorbents. Finally, the review ends with research gaps in material designs.

Molecularly Imprinted Polymers for the Removal of Antidepressants from Contaminated Wastewater

Selective serotonin reuptake inhibitors (SSRIs) are a class of antidepressants regularly detected in the environment. This indicates that the existing wastewater treatment techniques are not successfully removing them beforehand. This study investigated the potential of molecularly imprinted polymers (MIPs) to serve as sorbents for removal of SSRIs in water treatment. Sertraline was chosen as the template for imprinting. We optimized the composition of MIPs in order to obtain materials with highest capacity, affinity, and selectivity for sertraline. We report the maximum capacity of MIP for sertraline in water at 72.6 mg g⁻¹, and the maximum imprinting factor at 3.7. The MIPs were cross-reactive towards other SSRIs and the metabolite norsertraline. They showed a stable performance in wastewater-relevant pH range between 6 and 8, and were reusable after a short washing cycle. Despite having a smaller surface area between 27.4 and 193.8 m²·g⁻¹, as compared to that of the activated carbon at 1400 m²·g⁻¹, their sorption capabilities in wastewaters were generally superior. The MIPs with higher surface area and pore volume that formed more non-specific interactions with the targets considerably contributed to the overall removal efficiency, which made them better suited for use in wastewater treatment.