Plasma Surface Engineering of Natural and Sustainable Polymeric Derivatives and Their Potential Applications

The Application Progress of Nonthermal Plasma Technology in the Modification of Bone Implant Materials

With the accelerating trend of global aging, bone damage caused by orthopedic diseases, such as osteoporosis and fractures, has become a shared international event. Traffic accidents, high-altitude falls, and other incidents are increasing daily, and the demand for bone implant treatment is also growing. Although extensive research has been conducted in the past decade to develop medical implants for bone regeneration and healing of body tissues, due to their low biocompatibility, weak bone integration ability, and high postoperative infection rates, pure titanium alloys, such as Ti-6A1-4V and Ti-6A1-7Nb, although widely used in clinical practice, have poor induction of phosphate deposition and wear resistance, and Ti-Zr alloy exhibits a lack of mechanical stability and processing complexity. In contrast, the Ti-Ni alloy exhibits toxicity and low thermal conductivity. Nonthermal plasma (NTP) has aroused widespread interest in synthesizing and modifying implanted materials. More and more researchers are using plasma to modify target catalysts such as changing the dispersion of active sites, adjusting electronic properties, enhancing metal carrier interactions, and changing their morphology. NTP provides an alternative option for catalysts in the modification processes of oxidation, reduction, etching, coating, and doping, especially for materials that cannot tolerate thermodynamic or thermosensitive reactions. This review will focus on applying NTP technology in bone implant material modification and analyze the overall performance of three common types of bone implant materials, including metals, ceramics, and polymers. The challenges faced by NTP material modification are also discussed.

Cold plasma: A success road to mycotoxins mitigation and food value edition

Mycotoxins are common in many agricultural products and may harm both animals and humans. Dietary mycotoxins are reduced via physical, chemical, and thermal decontamination methods. Chemical residues are left behind after physical and chemical treatments that decrease food quality. Since mycotoxins are heat-resistant, heat treatments do not completely eradicate them. Cold plasma therapy increases food safety and shelf life. Cold plasma-generated chemical species may kill bacteria quickly at room temperature while leaving no chemical residues. This research explains how cold plasma combats mold and mycotoxins to guarantee food safety and quality. Fungal cells are damaged and killed by cold plasma species. Mycotoxins are also chemically broken down by the species, making the breakdown products safer. According to a preliminary cold plasma study, plasma may enhance food shelf life and quality. The antifungal and antimycotoxin properties of cold plasma benefit fresh produce, agricultural commodities, nuts, peppers, herbs, dried meat, and fish.

Control of spontaneous charging of sliding water drops by plasma-surface treatment

Slide electrification is the spontaneous separation of electric charges at the rear of water drops sliding over solid surfaces. This study delves into how surfaces treated with a low-pressure plasma impact water slide electrification. Ar, O2, and N2 plasma treatment reduced the drop charge and contact angles on glass, quartz, and SU-8 coated with 1H,1H,2H,2H-perfluoroctyltrichlorosilane (PFOTS), and polystyrene. Conversely, 64% higher drop charge was achieved using electrode-facing treatment in plasma chamber. Based on the zeta potential, Kelvin potential, and XPS measurements, the plasma effects were attributed to alterations of the topmost layer's chemistry, such as oxidation and etching, and superficially charge deposition. The surface top layer charges were less negative after electrode-facing and more negative after bulk plasma treatment. As a result, the zeta potential was less negative after electrode-facing and more negative after bulk plasma treatment. Although the fluorinated layer was applied after plasma activation, we observed a discernible impact of plasma-glass treatment on drop charging. Plasma surface modification offers a means to adjust drop charges: electrode-facing treatment of the fluorinated layer leads to an enhanced drop charge, while plasma treatment on the substrate prior to fluorination diminishes drop charges, all without affecting contact angles or surface roughness.

A review of starch-based biocomposites reinforced with plant fibers

Renewable and biodegradable resources have gained increasing attention as promising alternatives to synthetic plastics. Among the diverse raw materials employed in bioplastics production, starch emerges as an attractive, low-cost, and largely available source. However, the inherent properties of starch-based materials often limit their utility across various applications, necessitating strategic modifications to enhance their performance. A common approach to boost these materials involves incorporating natural fillers into biopolymer matrices. Incorporating natural fibers within starch matrices enables the development of biocomposites with improved properties while retaining their renewable and biodegradable characteristics. This review briefly addresses fundamental aspects of starch structure, obtention, and processing, as well as the main pre-treatments of natural fibers and processing methods currently applied to produce starch-based composites. It also highlights the most recent advances in this field, elucidates the effect of the incorporation of fibers on the biocomposite properties, and discusses the critical parameters affecting the synergic combination between starch and fibers.

Efficient Approach for Direct Robust Surface Grafting of Polyethyleneimine onto a Polyester Surface during Moulding

This paper uses a very effective way for surface modification of thermoplastic polymers during moulding. It is based on a grafting reaction between a thin layer of a functional polymer, deposited on a substrate in advance, and a polymer melt. In this paper, a glycol-modified polyethylene terephthalate (PETG) that was brought in contact with a polyethyleneimine layer during fused filament fabrication is investigated. The focus of this paper is the investigation of the reaction product. Grafting was realised by the formation of stable amide bonds by amidation of ester groups in the main chain of a PETG. XPS investigations revealed that the conversion of amino groups was very high, the distribution was even, and the quantity of amino groups per polyester surface area was still very high. The surface properties of the produced polyester part were mainly characterised by polyethyleneimine. The grafting was able to resist several cycles of extraction in alkaline solutions. The stability was only limited by saponification of the polyester. The degree of surface modification was dependent on the molar mass of polyethyleneimine. This could be rationalised, because grafting only occurred with the one polyethyleneimine molecule that is in close vicinity to the polyester surface when both components come in contact. Fused deposition modelling was chosen as the model process with control over each processing step. However, any other moulding process may be applied, particularly injection moulding for mass production.

Gentamicin Release Study in Uniaxial and Coaxial Polyhydroxybutyrate-Polyethylene Glycol-Gentamicin Microfibers Treated with Atmospheric Plasma

The skin is the largest organ and one of the most important in the human body, and is constantly exposed to pathogenic microorganisms that cause infections; then, pharmacological administration is required. One of the basic medical methods for treating chronic wounds is to use topical dressings with characteristics that promote wound healing. Fiber-based dressings mimic the local dermal extracellular matrix (ECM), maintaining an ideal wound-healing climate. This work proposes electrospun PHB/PEG polymeric microfibers as dressings for administering the antibiotic gentamicin directed at skin infections. PHB-PEG/gentamicin fibers were characterized before and after plasma treatment by Raman spectroscopy, FTIR, and XRD. SEM was used to evaluate fiber morphology and yarn size. The plasma treatment improved the hydrophilicity of the PHB/PEG/gentamicin fibers. The release of gentamicin in the plasma-treated fibers was more sustained over time than in the untreated ones.

Shear Strength Range of GF/Polyester Composites Controlled by Plasma Nanotechnology

Unsized single-end rovings are oxygen plasma pretreated and organosilicon plasma coated using plasma nanotechnology to optimize the interphase in glass-fiber-reinforced polyester composites and to determine the achievable range of their shear strength for potential applications. This surface modification of the fibers allows us to vary the shear strength of the composite in the range of 23.1 to 45.2 MPa at reduced financial costs of the process, while the commercial sizing corresponds to 39.2 MPa. The shear strength variability is controlled by the adhesion of the interlayer (plasma nanocoating) due to the variable density of chemical bonds at the interlayer/glass interface. The optimized technological conditions can be used for continuous surface modification of rovings in commercial online fiber-processing systems.

Plasma Modification Techniques for Natural Polymer-Based Drug Delivery Systems

Natural polymers have attracted significant attention in drug delivery applications due to their biocompatibility, biodegradability, and versatility. However, their surface properties often limit their use as drug delivery vehicles, as they may exhibit poor wettability, weak adhesion, and inadequate drug loading and release. Plasma treatment is a promising surface modification technique that can overcome these limitations by introducing various functional groups onto the natural polymer surface, thus enhancing its physicochemical and biological properties. This review provides a critical overview of recent advances in the plasma modification of natural polymer-based drug delivery systems, with a focus on controllable plasma treatment techniques. The review covers the fundamental principles of plasma generation, process control, and characterization of plasma-treated natural polymer surfaces. It discusses the various applications of plasma-modified natural polymer-based drug delivery systems, including improved biocompatibility, controlled drug release, and targeted drug delivery. The challenges and emerging trends in the field of plasma modification of natural polymer-based drug delivery systems are also highlighted. The review concludes with a discussion of the potential of controllable plasma treatment as a versatile and effective tool for the surface functionalization of natural polymer-based drug delivery systems.

Surface Modification and Mechanical Properties Improvement of Bamboo Fibers Using Dielectric Barrier Discharge Plasma Treatment

The effect of argon (Ar) and oxygen (O₂) gases as well as the treatment times on the properties of modified bamboo fibers using dielectric barrier discharge (DBD) plasma at generated power of 180 W were investigated. The plasma treatment of bamboo fibers with inert gases leads to the generation of ions and radicals on the fiber surface. Fourier transform-infrared spectroscopy (FTIR) confirmed that the functional groups of lignin and hemicellulose were reduced owing to the removal of the amorphous portion of the fibers by plasma etching. X-ray diffraction analysis (XRD) results in an increased crystallinity percentage. X-ray photoelectron spectroscopy (XPS) results showed the oxygen/carbon (O/C) atomic concentration ratio increased with increasing treatment time. The fiber weight loss percentage increased with increased treatment time. Scanning electron microscopy (SEM) images showed that partial etching of the fiber surface led to a higher surface roughness and area and that the Ar + O₂ gas plasma treatment provided more surface etching than the Ar gas treatment because of the oxidation reaction of the O₂ plasma. The mechanical properties of fiber-reinforced epoxy (FRE) matrix composites revealed that the F_(tr)RE-Ar (30) samples showed a high tensile strength, whereas the mechanical properties of the F_(tr)RE-Ar + O₂ sample decreased with increased treatment time.

Microfiltration Membranes Modified with Zinc by Plasma Treatment

Polymer membranes play an important role in various filtration processes. The modification of a polyamide membrane surface by one-component Zn and ZnO coatings and two-component Zn/ZnO coatings is presented in this work. The technological parameters of the Magnetron Sputtering-Physical Vapor Deposition method (MS-PVD) for the coatings deposition process show an impact on the influence on the membrane's surface structure, chemical composition, and functional properties. The characterization of surface structure and morphology were analyzed by scanning electron microscopy. In addition, surface roughness and wettability measurements were also made. For checking the antibacterial activity, the two representative strains of bacteria Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) were used. The filtration tests showed that polyamide membranes covered with three types of coatings, one-component Zn coatings, ZnO coatings, and two-component Zn/ZnO coatings, presented similar properties. The obtained results show that using the MS-PVD method for modification of the membrane's surface is a very promising perspective in the prevention of biofouling.