Biodegradable Polymer Membranes Applied in Guided Bone/Tissue Regeneration: A Review

Biodegradable polyvinyl alcohol/nano-hydroxyapatite composite membrane enhanced by MXene nanosheets for guided bone regeneration

MXene, as a new category of two-dimensional nanomaterials, exhibits a promising prospect in biomedical applications due to its ultrathin structure and morphology, as well as a range of remarkable properties such as biological, chemical, electronic, and optical properties. In this work, different concentrations of MXene (M) were added to polyvinyl alcohol (PVA, P)/nano-hydroxyapatite (n-HA, H) mixed solution, and series of PVA/n-HA/MXene (PHM) composite membranes were obtained by combining sol-gel and freeze-drying processes. Morphology, chemical composition, surface, and mechanical properties of the prepared PHM membranes were characterized by various techniques. Subsequently, the swelling and degradation performances of the composite membranes were tested by swelling and degradation tests. In addition, in vitro studies like cell adhesion, cytotoxicity, proliferation, osteogenic differentiation, and antibacterial properties of MC3T3-E1 were also evaluated. The results showed that the addition of MXene could apparently improve the composite membranes' physicochemical properties, bioactivity, and osteogenic differentiation. Specially, PHM membrane had the best comprehensive properties when the concentration of MXene was set as 2.0% w/v. In a word, the addition of MXene has a positive effect on improving the mechanical properties, osteogenic induction, and antibacterial properties of PH composite membranes, and the prepared PHM composite membranes possess potential applications for guided bone regeneration.

Productizing Nano-Bioactive Glass-Based Bilayer Scaffolds: A Graft for Reconstruction of Mandibular and Femoral Bone Defects

This investigation aimed to construct a bilayer scaffold integrating alginate and gelatin with nanobioactive glass (BG), recognized for their efficacy in tissue regeneration and drug delivery. Scaffolds, namely, alginate/gelatin (AG), alginate-/actonel gelatin (AGD), alginate actenol/gelatin-45S5 BG (4AGD), and alginate-actonel/gelatin-59S BG (5AGD), were assembled using a cost-effective freeze-drying method, followed by detailed structural investigation via powder X-ray diffraction as well as morphological characterization using field emission scanning electron microscopy (FESEM). FESEM revealed a honeycomb-like morphology with distinct pore sizes for nutrient, oxygen, and drug transport. The scaffolds evidently exhibited hemocompatibility, high porosity, good swelling capacity, and biodegradability. In vitro studies demonstrated sustained drug release, particularly for scaffolds containing actonel. In vivo tests showed that the bilayer scaffold promoted new bone formation, surpassing the control group in bone area increase. The interaction of the scaffold with collagen and released ions improved the osteoblastic function and bone volume fraction. The findings suggest that this bilayer scaffold could be beneficial for treating critical-sized bone defects, especially in the mandibular and femoral regions.

Chitosan-based materials for dental implantology: A comprehensive review

Chitosan, a versatile biopolymer, has gained recognition in the discipline of dental implantology due to possessing salient properties. This comprehensive review explores the potential of chitosan in dental implants, focusing on its biocompatibility, bioactivity, and the various chitosan-based materials that have been utilized for dental implant therapy. The review also highlights the importance of surface treatment in dental implants to enhance osseointegration and inhibit bacterial biofilm formation. Additionally, the chemical structure, properties, and sources of chitosan are described, along with its different structural forms. The characteristics of chitosan particularly color, molecular weight, viscosity, and degree of deacetylation are discussed about their influence on its applications. This review provides valuable insights into the promising utilization of polymeric chitosan in enhancing the success and functionality of dental implants. This study highlights the potential applications of chitosan in oral implantology. Chitosan possesses various advantageous properties, including muco-adhesiveness, hemostatic action, biocompatibility, biodegradability, bioactivity, and antibacterial and antifungal activities, which enhance its uses in dental implantology. However, it has limited aqueous solubility at the physiological pH, which sometimes restricts its biological application, but this problem can be overcome by using modified chitosan or chitosan derivatives, which have also shown encouraging results. Recent research suggests that chitosan may act as a promising material for coating titanium-based implants, improving osteointegration together with antibacterial properties.

Bioinspired polysaccharide-based nanocomposite membranes with robust wet mechanical properties for guided bone regeneration

Polysaccharide-based membranes with excellent mechanical properties are highly desired. However, severe mechanical deterioration under wet conditions limits their biomedical applications. Here, inspired by the structural heterogeneity of strong yet hydrated biological materials, we propose a strategy based on heterogeneous crosslink-and-hydration (HCH) of a molecule/nano dual-scale network to fabricate polysaccharide-based nanocomposites with robust wet mechanical properties. The heterogeneity lies in that the crosslink-and-hydration occurs in the molecule-network while the stress-bearing nanofiber-network remains unaffected. As one demonstration, a membrane assembled by bacterial cellulose nanofiber-network and Ca2+-crosslinked and hydrated sodium alginate molecule-network is designed. Studies show that the crosslinked-and-hydrated molecule-network restricts water invasion and boosts stress transfer of the nanofiber-network by serving as interfibrous bridge. Overall, the molecule-network makes the membrane hydrated and flexible; the nanofiber-network as stress-bearing component provides strength and toughness. The HCH dual-scale network featuring a cooperative effect stimulates the design of advanced biomaterials applied under wet conditions such as guided bone regeneration membranes.

Development of a PVA/PCL/CS-Based Nanofibrous Membrane for Guided Tissue Regeneration and Controlled Delivery of Doxycycline Hydrochloride in Management of Periodontitis: In Vivo Evaluation in Rats

Antibiotic administration is an adjacent therapy to guided tissue regeneration (GTR) in the management of periodontitis. This is due to the major role of pathogen biofilm in aggravating periodontal defects. This study aimed to fabricate a GTR membrane for sustained delivery of doxycycline hydrochloride (DOX) while having a space-maintaining function. The membranes were prepared using a polymeric blend of polycaprolactone/polyvinyl alcohol/chitosan by the electrospinning technique. The obtained membranes were characterized in terms of physicochemical and biological properties. Nanofibers showed a mean diameter in the submicron range of < 450 nm while having uniform randomly aligned morphology. The obtained membranes showed high strength and flexibility. A prolonged in vitro release profile during 68 h was observed for manufactured formulations. The prepared membranes showed a cell viability of > 70% at different DOX concentrations. The formulations possessed antimicrobial efficacy against common pathogens responsible for periodontitis. In vivo evaluation also showed prolonged release of DOX for 14 days. The histopathological evaluation confirmed the biocompatibility of the GTR membrane. In conclusion, the developed nanofibrous DOX-loaded GTR membranes may have beneficial characteristics in favour of both sustained antibiotic delivery and periodontal regeneration by space-maintaining function without causing any irritation and tissue damage.

Poly(lactic acid/caprolactone) bilayer membrane achieves bone regeneration through a prolonged barrier function

Guided bone regeneration (GBR) is a treatment strategy used to recover bone volume. Barrier membranes are a key component of GBR protocols, and their properties can impact treatment outcomes. This study investigated the efficacy of an experimental, slow-degrading, bilayer barrier membrane for application in GBR using in vivo animal models. A synthetic copolymer of poly(lactic acid/caprolactone) (PLCL) was used to prepare a slow-degrading bilayer membrane. The biodegradability of PLCL was evaluated by subcutaneous implantation in a rat model. The barrier function of the PLCL membrane was investigated in a rat calvaria defect model and compared with commercially available membranes composed of type I collagen (Col) and poly(lactic-co-glycolic acid) (PLGA). An alveolar bone defect model in beagle dogs was used to simulate GBR protocols to evaluate the bone regeneration ability of the experimental PLCL membrane. The PLCL membrane showed slow biodegradation, resulting in an efficient and prolonged barrier function compared with commercial materials. In turn, this barrier function enabled the space-making ability of PLCL membrane and facilitated bone regeneration. In the alveolar bone defect model, significantly greater regeneration was achieved by treatment with PLCL membrane compared with Col and PLGA membranes. Additionally, a continuous alveolar ridge contour was observed in PLCL-treated bone defects. In conclusion, the PLCL bilayer membrane is a promising biomaterial for use in GBR given its slow degradation and prolonged barrier function.

Appraising and comparing the role of autogenous periosteal graft as a barrier membrane in the treatment of intrabony defects in chronic periodontitis cases: A systematic review and meta-analysis

Periodontal regeneration refers to procedures aimed at restitution of lost supporting tissue around the periodontally compromised tooth. Regenerative procedures very often include the use of barrier materials to encourage the growth of key surrounding tissues. The current study aimed to evaluate the effectiveness of autogenous periosteal graft as a barrier membrane for the treatment of intrabony defects in chronic periodontitis patients. A total of four data bases MEDLINE (by PubMed), Cochrane database, EBSCO, and Google Scholar were explored to identify the studies in English up to December 2022. An additional hand search of relevant journals was also done. A team of three independent reviewers screened the retrieved articles using the inclusion criteria. Randomized control trials (RCTs) evaluating the effectiveness of autogenous periosteal grafts in the treatment of intrabony defects in chronic periodontitis cases were included in the study. A total of six relevant articles were recognized for data procurement. A total of 117 patients with 68 sites with an age range between 18 years and 55 years were selected. Outcome variables examined were pocket depth (PD), clinical attachment level (CAL), radiographic bone defect fill (BDF), gingival recession (GR), plaque index (PI), gingival index (GI) and bleeding on probing (BOP). Data were analyzed using Revman 5.3 software. The mean differences and 95% confidence interval were used to illustrate the estimate of effect size. There is an equal effect in both groups for the PI, GI, and BOP reduction. For PD reduction, the result was in the favor of periosteal graft with open flap debridement (OFD) group. For CAL gain, radiographic BDF and GR, results also favored the periosteal graft, but no statistically significant difference was found amongst the groups. Within the limitation of the study, it seems that the autogenous periosteal graft can be used successfully along with OFD to treat intrabony defects in chronic periodontitis patients.

A bi-layered asymmetric membrane loaded with demineralized dentin matrix for guided bone regeneration

OBJECTIVES

Guided bone regeneration (GBR) is a well-established method for repairing hard tissue deficiency in reconstructive dentistry. The aim of this study was to investigate the barrier function, osteogenic activity and immunomodulatory ability of a novel bi-layered asymmetric membrane loaded with demineralized dentin matrix (DDM).

METHODS

DDM particles were harvested from healthy, caries-free permanent teeth. Electrospinning technique was utilized to prepare bi-layered DDM-loaded poly(lactic-co-glycolic acid) (PLGA)/poly(lactic acid) (PLA) membranes (abbreviated as DPP bilayer membranes). We analyzed the membranes' surface properties, cytocompatibility and barrier function, and evaluated their osteogenic activity in vitro. In addition, its effects on the osteogenic immune microenvironment were also investigated.

RESULTS

Synthetic DPP bilayer membranes presented suitable surface characteristics and satisfactory cytocompatibility. Transwell assays showed significant fewer migrated cells by the DPP bilayer membranes compared with blank control, with or without in vitro degradation (all P < 0.001). In vitro experiments indicated that our product elevated messenger ribonucleic acid (mRNA) expression levels of osteogenic genes alkaline phosphatase (ALP), osteopontin (OPN), osteocalcin (OCN) and runt-related transcription factor 2 (Runx2). Among all groups, 20% DPP bilayer membrane displayed highest ALP activity (P < 0.001). Furthermore, DPP bilayer membranes enhanced the mRNA expression of M2 macrophage markers and increased the proportion of CD206+ M2 macrophages by 100% (20% DPP: P < 0.001; 30% DPP: P < 0.001; 40% DPP: P < 0.05), thus exerting an inflammation suppressive effect.

CONCLUSIONS

DPP bilayer membranes exhibited notable biological safety and osteogenic activity in vitro, and have potential as a prospective candidate for GBR approach in the future.

Regeneration Membranes Loaded with Non-Antibiotic Anti-2 Microbials: A Review

Both guided bone and guided tissue regeneration are techniques that require the use of barrier membranes. Contamination and infection of the surgical area is one of the most feared complications. Some current lines of research focus on functionalizing these membranes with different antimicrobial agents. The objective of this study was to carry out a review of the use and antibacterial properties of regeneration membranes doped with antimicrobials such as zinc, silver, chlorhexidine, and lauric acid. The protocol was based on PRISMA recommendations, addressing the PICO question: "Do membranes doped with non-antibiotic antimicrobials have antibacterial activity that can reduce or improve infection compared to membranes not impregnated with said antimicrobial?" Methodological quality was evaluated using the RoBDEMAT tool. A total of 329 articles were found, of which 25 met the eligibility criteria and were included in this review. Most studies agree that zinc inhibits bacterial growth as it decreases colony-forming units, depending on the concentration used and the bacterial species studied. Silver compounds also decreased the secretion of proinflammatory cytokines and presented less bacterial adhesion to the membrane. Some concentrations of chlorhexidine that possess antimicrobial activity have shown high toxicity. Finally, lauric acid shows inhibition of bacterial growth measured by the disk diffusion test, the inhibition zone being larger with higher concentrations. Antimicrobial agents such as zinc, silver, chlorhexidine, and lauric acid have effective antibacterial activity and can be used to dope regenerative membranes in order to reduce the risk of bacterial colonization.

Recent Advances in Functionalized Electrospun Membranes for Periodontal Regeneration

Periodontitis is a global, multifaceted, chronic inflammatory disease caused by bacterial microorganisms and an exaggerated host immune response that not only leads to the destruction of the periodontal apparatus but may also aggravate or promote the development of other systemic diseases. The periodontium is composed of four different tissues (alveolar bone, cementum, gingiva, and periodontal ligament) and various non-surgical and surgical therapies have been used to restore its normal function. However, due to the etiology of the disease and the heterogeneous nature of the periodontium components, complete regeneration is still a challenge. In this context, guided tissue/bone regeneration strategies in the field of tissue engineering and regenerative medicine have gained more and more interest, having as a goal the complete restoration of the periodontium and its functions. In particular, the use of electrospun nanofibrous scaffolds has emerged as an effective strategy to achieve this goal due to their ability to mimic the extracellular matrix and simultaneously exert antimicrobial, anti-inflammatory and regenerative activities. This review provides an overview of periodontal regeneration using electrospun membranes, highlighting the use of these nanofibrous scaffolds as delivery systems for bioactive molecules and drugs and their functionalization to promote periodontal regeneration.

Surface topography of resorbable porcine collagen membranes, and their effect on early osteogenesis: An in vitro study

OBJECTIVE

Guided tissue regeneration (GTR) is based on the use of different membranes that function as sealants and barriers in specific clinical situations. Among the several tissue production methods and origins, resorbable porcine-derived membranes are the most commonly used. Because these membranes are so diverse, and have several different clinical applications, doubts linger as to their effect in stimulating osteogenesis. The objective of this study was to make an in vitro evaluation of the viability and differentiation of osteoblastic cells cultured on the surface of the following collagen membranes: Jason® (Botiss Biomaterials), Collprotect® (Botiss Biomaterials), and Bio-Gide® (Geistlich).

MATERIAL AND METHODS

Fragments of the 3 resorbable collagen membranes (5 × 5 mm) were used, and pre-osteoblastic SAOS-2 cells (ATCC, USA) were plated on their porous surfaces. Evaluation of the membranes was performed at 3, 5 and 7 days, considering the following parameters: (1) topographic analysis of the different surfaces by scanning electron microscope; (2) cellular viability by MTT, (3) quantification of type I collagen and osteopontin by Elisa. The quantitative analyses were carried out using a significance level of 5%.

RESULTS

Collprotect® and Jason® membranes presented a rough surface with an irregular aspect on both sides, while double-layered Bio-Gide® had one layer with a smooth surface and the other with a rough surface along each respective length. The viability assays revealed that the cells cultured the cells grown on Collprotect® showed higher viability than those grown in Bio-Gide® or Jason®, especially after 5 and 7 days. After 3 and 5 days, evaluation of type I collagen showed that the cells plated on the Jason® and Collprotect® surfaces had greater collagen secretion than those plated on BioGide®. After 7 days, an increase in osteopontin levels was observed when the cells were plated on all the experimental membranes, compared with the control group.

CONCLUSION

All the tested membranes were suitable for use in GTR clinical procedures. Their indication in specific regenerative cases depends on the mechanical and biological properties of their originating tissues, thus enabling better results and assertive choices by dental professionals.

Periapical healing following endodontic microsurgery with collagen-based bone-filling material: A randomized controlled clinical trial

AIM

To evaluate two- and three-dimensionally the effect of resorbable collagen-based bone-filling material on periapical healing of endodontic lesions with four-wall defects following endodontic microsurgery (EMS).

METHODOLOGY

This parallel, randomized controlled superiority clinical trial involved 86 lesions with the strictly endodontic origin and four-wall defect morphology. EMS procedures were performed by calibrated postgraduate residents. Before flap closure, osteotomies were randomized to the control or treatment group. In the control group, the flap was repositioned with no material added. In the treatment group, a collagen-based bone-filling augmentation material was placed into the osteotomy. Clinical and radiographic examinations were completed after 12 months. Periapical healing was evaluated by blinded evaluators using periapical (PA) radiographs according to Molven's criteria and cone beam computed tomography (CBCT) scans according to PENN's 3D criteria. Cortical plate healing was scored according to the RAC/B index. The data were analysed using Fisher's exact test, Logistic regression models and Chi-squared test. The significance level was predetermined at p < .05.

RESULTS

Sixty-six cases were evaluated at the 12-month follow-up, with 30 and 36 cases in the control and treatment groups, respectively. Only the asymptomatic cases (control = 26, treatment = 32) were included in the radiographic evaluation. Twenty-three cases (88.5%) in the control and 28 (87.5%) cases in the treatment group demonstrated complete healing on PA radiographs (p = 1.000). On CBCT, 10 (38.4%) and 21 (65.6%) cases had completely healed in the control and treatment groups, respectively (p = .095). The re-establishment of the buccal cortical plate was detected in 12 (46.2%) and 22 (68.8%) cases in the control and treatment groups, respectively (p = .243).

CONCLUSION

Within the limitations of the present study, the use of collagen-based bone-filling material had no statistically significant effect on the periapical healing of endodontic lesions with four-wall defect following EMS at the 12-month follow-up when evaluated by PA radiographs or CBCT scans. However, the observed higher percentage of a re-established cortical plate in the treatment group could suggest a clinical benefit that is of interest after surgical endodontic treatment.

Tooth-derived stem cells integrated biomaterials for bone and dental tissue engineering

Recent years have seen the emergence of tissue engineering strategies as a means to overcome some of the limits of conventional medical treatment. A biomaterial with tailored physio-chemical characteristics is used in this sophisticated method to transport stem cells and growth factors/bioactive substances, or to attract local endogenous cells, enabling new tissue formation. Biomaterials might serve as a biomimetic structure inspired by the natural milieu, assisting the cells in establishing their natural relationships. Such a method would benefit from having ready access to an abundant reservoir of stem cells with strong tissue regeneration capacity, in addition to using biological compatible material to promote new tissue creation. Teeth may have a plethora of self-renewing, multipotent mesenchymal stem cell (MSC) populations. Recent advancements and promising directions for cell transplantation and homing techniques using dental MSCs for tissue regeneration are discussed in this review paper. Overall, this research paints a picture of the present landscape of new approaches to using tooth-derived MSCs in conjunction with biomaterials and bioactive substances for tissue regeneration.

Development of Novel Polysaccharide Membranes for Guided Bone Regeneration: In Vitro and In Vivo Evaluations

INTRODUCTION

Guided bone regeneration (GBR) procedures require selecting suitable membranes for oral surgery. Pullulan and/or dextran-based polysaccharide materials have shown encouraging results in bone regeneration as bone substitutes but have not been used to produce barrier membranes. The present study aimed to develop and characterize pullulan/dextran-derived membranes for GBR.

MATERIALS AND METHODS

Two pullulan/dextran-based membranes, containing or not hydroxyapatite (HA) particles, were developed. In vitro, cytotoxicity evaluation was performed using human bone marrow mesenchymal stem cells (hBMSCs). Biocompatibility was assessed on rats in a subcutaneous model for up to 16 weeks. In vivo, rat femoral defects were created on 36 rats to compare the two pullulan/dextran-based membranes with a commercial collagen membrane (Bio-Gide®). Bone repair was assessed radiologically and histologically.

RESULTS

Both polysaccharide membranes demonstrated cytocompatibility and biocompatibility. Micro-computed tomography (micro-CT) analyses at two weeks revealed that the HA-containing membrane promoted a significant increase in bone formation compared to Bio-Gide®. At one month, similar effects were observed among the three membranes in terms of bone regeneration.

CONCLUSION

The developed pullulan/dextran-based membranes evidenced biocompatibility without interfering with bone regeneration and maturation. The HA-containing membrane, which facilitated early bone regeneration and offered adequate mechanical support, showed promising potential for GBR procedures.

In vivo behavior of a collagen-coated nano-hydroxyapatite enriched polycaprolactone membrane in rat mandibular defects

BACKGROUND

This research investigated the ability of fabricated collagen (COL) coated nano-hydroxyapatite (nHA) enriched polycaprolactone (PCL) membrane to facilitate new bone formation (NBF) and its biocompatibility.

METHODS

Unilateral mandibular angulus defects of 28 female 12-week-old long Evans rats were created with a trephine bur with 5 mm in diameter and divided into two groups. While the test group was treated with the membrane (M-1, M-2), the control was left as self-healing (C-1, C-2) and sacrificed at 2nd (M-1, C-1) and 8th week (M-2, C-2) postoperatively. The mandibular bone of the rats was evaluated histopathologically. Density of the regenerated bone was evaluated with PET/CT.

RESULTS

Histopathologically, NBF which started from the periphery of the defect had rich cellular character in M-1. Significantly higher NBF was found in M-2 when compared to M-1 (P=0.003). Furthermore, significantly lesser degree of inflammation was found in M-2 when compared to M-1 (P<0.05).

CONCLUSION

This study suggests that the novel COL-coated nHA-enriched PCL membrane can serve a promising design for tissue engineering as guided bone regeneration in alveolar defects.

Characterization of Polyvinyl Alcohol-Collagen-Hydroxyapatite Composite Membrane from Lates calcarifer Scales for Guided Tissue and Bone Regeneration

OBJECTIVE

 To determine the chemical structure, tensile strength, porosity, and degradability of polyvinyl alcohol (PVA)-collagen-hydroxyapatite (HA) composite membranes for guided tissue and bone regeneration.

MATERIALS AND METHODS

 The PVA-collagen-HA composite membrane was divided into three groups: the group without irradiation, the group with 15 kGy irradiation, and 25 kGy irradiation. Each group was tested for chemical structure with Fourier-transform infrared (FT-IR) at a wavelength of 400 to 4,000 cm-1. Tensile strength test was tested in dry and wet conditions with the standard method of American Standard Testing Mechanical (ASTM) D638, and porosity using scanning electron microscope and analyzed using ImageJ software. Degradability test immersed in a solution of phosphate-buffered saline. Data were analyzed using analysis of variance (ANOVA) and Tukey's test.

RESULTS

 FT-IR test before and after storage for 30 days on three media showed a stable chemical structure with the same functional groups. ANOVA analysis showed a significant difference (p < 0.05) in the dry condition (p = 0.006), Tukey's test showed a significant difference in the 15 kGy and 25 kGy irradiated groups (p = 0.005), but the groups without irradiation had no significant difference with the 15 kGy (p = 0.285) and 25 kGy (p = 0.079) irradiation groups. In wet conditions, there was no significant difference (p > 0.05) in each group (p = 373). The size of the porosity in the group without irradiation, 15 kGy irradiation, and 25 kGy irradiation showed a size of 4.65, 6.51, and 8.08 m, respectively. The degradability test showed a decrease in weight in each group, with the total weight of the membrane being completely degraded from the most degraded to the least: the groups without irradiation, 15 kGy irradiation, and 25 kGy irradiation. The ANOVA test on the degradability test shows significant (p < 0.05) in the PVA-collagen-HA composite membrane group over time intervals (p = 0.000). Tukey's post hoc test showed a significant difference (p < 0.05) after 1 week between the groups without irradiation with 15 kGy (p = 0.023).

CONCLUSION

 PVA-collagen-HA composite membrane has a stable chemical structure, optimal tensile strength, porosity, and ideal degradability as guided bone regeneration and guided tissue regeneration.

Resorbable Membranes for Guided Bone Regeneration: Critical Features, Potentials, and Limitations

Lack of horizontal and vertical bone at the site of an implant can lead to significant clinical problems that need to be addressed before implant treatment can take place. Guided bone regeneration (GBR) is a commonly used surgical procedure that employs a barrier membrane to encourage the growth of new bone tissue in areas where bone has been lost due to injury or disease. It is a promising approach to achieve desired repair in bone tissue and is widely accepted and used in approximately 40% of patients with bone defects. In this Review, we provide a comprehensive examination of recent advances in resorbable membranes for GBR including natural materials such as chitosan, collagen, silk fibroin, along with synthetic materials such as polyglycolic acid (PGA), polycaprolactone (PCL), polyethylene glycol (PEG), and their copolymers. In addition, the properties of these materials including foreign body reaction, mechanical stability, antibacterial property, and growth factor delivery performance will be compared and discussed. Finally, future directions for resorbable membrane development and potential clinical applications will be highlighted.

Preparation of co-electrospinning membrane loaded with simvastatin and substance P to accelerate bone regeneration by promoting cell homing, angiogenesis and osteogenesis

Bone regeneration is a complex process that requires the coordination of various biological events. Developing a tissue regeneration membrane that can regulate this cascade of events is challenging. In this study, we aimed to fabricate a membrane that can enrich the damaged area with mesenchymal stem cells, improve angiogenesis, and continuously induce osteogenesis. Our approach involved creating a hierarchical polycaprolactone/gelatin (PCL/GEL) co-electrospinning membrane that incorporated substance P (SP)-loaded GEL fibers and simvastatin (SIM)-loaded PCL fibers. The membrane could initiate a burst release of SP and a slow/sustained release of SIM for over a month. In vitro experiments, including those related to angiogenesis and osteogenesis (e.g., migration, endothelial network formation, alkaline phosphatase activity, mineralization, and gene expression), clearly demonstrated the membrane's superior ability to improve cell homing, revascularization, and osteogenic differentiation. Furthermore, a series of in vivo studies, including immunofluorescence of CD29⁺/CD90⁺ double-positive cells and immunohistochemical staining for CD34 and vWF, confirmed the co-electrospinning membrane's ability to enhance MSC migration and revascularization response after five days of implantation. After one month, the Micro-CT and histological (Masson and H&E) results showed accelerated bone regeneration. Our findings suggest that a co-electrospinning membrane with time-tunable drug delivery could advance the development of tissue engineering therapeutic strategies and potentially improve patient outcomes.

Rational design of poly(peptide-ester) block copolymers for enzyme-specific surface resorption

Tissue resorption and remodeling are pivotal steps in successful healing and regeneration, and it is important to design biomaterials that are responsive to regenerative processes in native tissue. The cell types responsible for remodeling, such as macrophages in the soft tissue wound environment and osteoclasts in the bone environment, utilize a class of enzymes called proteases to degrade the organic matrix. Many hydrophobic thermoplastics used in tissue regeneration are designed to degrade and resorb passively through hydrolytic mechanisms, leaving the potential of proteolytic-guided degradation underutilized. Here, we report the design and synthesis of a tyrosol-derived peptide-polyester block copolymer where protease-mediated resorption is tuned through changing the chemistry of the base polymer backbone and protease specificity is imparted through incorporation of specific peptide sequences. Quartz crystal microbalance was used to quantify polymer surface resorption upon exposure to various enzymes. Aqueous solubility of the diacids and the thermal properties of the resulting polymer had a significant effect on enzyme-mediated polymer resorption. While peptide incorporation at 2 mol% had little effect on the final thermal and physical properties of the block copolymers, its incorporation improved polymer resorption significantly in a peptide sequence- and protease-specific manner. To our knowledge, this is the first example of a peptide-incorporated linear thermoplastic with protease-specific sensitivity reported in the literature. The product is a modular system for engineering specificity in how polyesters can resorb under physiological conditions, thus providing a potential framework for improving vascularization and integration of biomaterials used in tissue engineering.

A Synthetic Bio-Absorbable Membrane in Guided Bone Regeneration in Dehiscence-Type Defects: An Experimental In Vivo Investigation in Dogs

This study aimed to determine the performance and characteristics of a synthetic barrier membrane of polylactic acid and acetyl butyl citrate (PLAB) for the lateral bone augmentation of peri-implant dehiscence defects (mean height × depth = 3 mm × 1 mm). In eight dogs, three treatment groups were randomly allocated at each chronic peri-implant dehiscence-type defect: (i) a deproteinized bovine bone mineral covered by a synthetic barrier membrane (test group), (ii) a deproteinized bovine bone mineral covered by a natural collagen membrane (positive control), and (iii) a synthetic barrier membrane (negative control). After 4 and 12 weeks of submerged healing, dissected tissue blocks were processed for calcified and decalcified histological analysis. Histometric measurements for tissue and bone width were performed, and bone-to-implant contact and alkaline phosphatase expression where measured. After 4 and 12 weeks of healing, no statistical differences between the groups were observed for the histometric measurements. The expression of alkaline phosphatase was higher in the positive control group after 4 weeks followed by the positive and negative controls (5.25 ± 4.09, 4.46 ± 3.03, and 4.35 ± 2.28%, p > 0.05) and 12 weeks followed by the negative and positive controls (4.3 ± 2.14, 3.21 ± 1.53, and 2.39 ± 1.03%, p > 0.05). Concerning the bone-to-implant contact, after 4 weeks, the test group obtained the highest results (39.54 ± 48.7) vs. (31.24 ± 42.6) and (20.23 ± 36.1), respectively, while after 12 weeks, the positive control group obtained the highest Bone to imaplant contact (BIC) results, followed by the test and negative controls, (35.91 ± 24.9) vs. (18.41 ± 20.5) and (24.3 ± 32.1), respectively; no statistically significant differences were obtained. Within the limitations of the study, new bone formation can be achieved in guided bone regeneration procedures simultaneously with implant placement either with the use of a PLAB membrane or a native collagen membrane, although these differences were not statistically significant.

Preparation and Characterization of a Novel Tragacanth Gum/Chitosan/Sr-Nano-Hydroxyapatite Composite Membrane

It is a great challenge to obtain an ideal guided bone regeneration (GBR) membrane. In this study, tragacanth gum (GT) was introduced into a chitosan/nano-hydroxyapatite (CS/n-HA) system. The effects of different component ratios and strontium-doped nano-hydroxyapatite (Sr-HA) on the physical-chemical properties and degradation behavior of the CS/Sr-n-HA/GT ternary composite membrane were investigated using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), contact angle, electromechanical universal tester and in vitro soaking in simulated body fluid (SBF). The results showed that CS could be ionically crosslinked with GT through electrostatic interaction, and Sr-n-HA was loaded via hydrogen bond, which endowed the GT/CS/n-HA composite membrane with good tensile strength and hydrophilicity. In addition, the results of immersion in SBF in vitro showed that CS/n-HA/GT composite membranes had different degradation rates and good apatite deposition by investigating the changes in pH value, weight loss, water absorption ratio, SEM morphology observation and tensile strength reduction. All results revealed that the CS/Sr-n-HA/GT (6:2:2) ternary composite membrane possessed the strongest ionic crosslinking of GT and CS, which was expected to obtain more satisfactory GBR membranes, and this study will provide new applications of GT in the field of biomedical membranes.

Immuno-histologic and histomorphometric evaluation of Angelica sinensis adjunctive to ß-tricalcium phosphate in critical-sized class II furcation defects in dogs

OBJECTIVE

The study evaluates the effectiveness of Angelica sinensis (As) adjunctive to Beta-tricalcium phosphate (β-TCP) bone graft in the management of induced critical sized class II furcation defects in dogs.

MATERIAL AND METHOD

A randomized study design was conducted on the third and fourth premolars of six dogs. A total of twenty-four defects were surgically created. After reflecting a mucoperiosteal flap, twelve defects were filled with As granules mixed with β-TCP (Experimental group) while the other twelve defects were filled with β-TCP only (Control group) and both were covered by collagen membrane. At the fourth and eighth weeks, jaw segments were dissected and processed for immune-histological examination and histomorphometry analysis.

RESULTS

At four and eight weeks after treatment, experimental group showed a statistically significant increase in the height of newly formed interradicular bone (p = 0.001 and p = 0.0001 respectively), its surface area (p = 0.002 and p = 0.02 respectively), and the thickness of its trabeculae (p = 0.0001 and p = 0.001 respectively), when compared to control group. Moreover. alkaline phosphatase immunoreaction showed higher intensity in the osteoblast cells of experimental group compared to control group.

CONCLUSION

As enhances periodontal regeneration and bone-formation when used in the management of furcation defects.

Physical Characteristics and Biocompatibility of 3D-Printed Polylactic-Co-Glycolic Acid Membranes Used for Guided Bone Regeneration

Bioresorbable polymeric membranes for guided bone regeneration (GBR) were fabricated using the three-dimensional printing technique. Membranes made of polylactic-co-glycolic acid (PLGA), which consist of lactic acid (LA) and glycolic acid in ratios of 10:90 (group A) and 70:30 (group B), were compared. Their physical characteristics including architecture, surface wettability, mechanical properties, and degradability were compared in vitro, and their biocompatibilities were compared in vitro and in vivo. The results demonstrated that the membranes of group B had mechanical strength and could support the proliferation of fibroblasts and osteoblasts significantly better than those of group A (p < 0.05). The degradation rate in Group B was significantly lower than that in Group A, but they significantly produced less acidic environment (p < 0.05). In vivo, the membranes of group B were compared with the commercially available collagen membranes (group C). The amount of newly formed bone of rat's calvarial defects covered with the membranes of group C was stable after week 2, whereas that of group B increased over time. At week 8, the new bone volumes in group B were greater than those in group C (p > 0.05). In conclusion, the physical and biological properties of the PLGA membrane (LA:GA, 70:30) were suitable for GBR.

Biodegradable wound dressing-based collagen/hyaluronic acid loaded antibacterial agents for wound healing application

Three biodegradable wound dressing based on binary Collagen (COL), Hyaluronic acid (HA) crosslinked loaded with silver nanoparticles (AgNPs), Gentamicin (GENT) and AgNPs/GENT successfully prepared using freeze drying technique. Chemical evaluations for synthesized membranes were carried out using FTIR- ATR. While physical properties were evaluated through swelling and degradation percent. Antibacterial activity was evaluated against G+, G-, yeast and fungi. Finally, cytotoxicity and wound healing evaluations were carried out against skin fibroblast normal cell line, while anti-inflammatory evaluated using RAW 264.7 macrophage cell line. The three produced membrane showed physically interaction between polymer network and the loaded antibiotic. Swelling properties showed superior results for three membranes. Degradability of prepared sheets was rapidly no more than three days. Toxicity evaluations and anti-inflammatory showed superior results for all examined samples except mixed with AgNPs and Gentamicin (GENT). Antibacterial activity showed resistance to G+, G- and yeast. All prepared sheet showed safe towards cell except COL/HA/AgNPs/GENT. Wound healing studied showed efficient of both COL/HA/AgNPs and COL/HA/GENT compared to blank and mixed membrane COL/HA/AgNPs/GENT. The obtained results recommended COL/HA loaded individually either AgNPs or Gentamicin (GENT) as antibacterial and wound healing sheet rather than mixed prepared membrane.

Underestimated microbial infection of resorbable membranes on guided regeneration

Barrier membranes are critical in creating tissuecompartmentalization for guided tissue (GTR) and bone regeneration (GBR) therapies. More recently, resorbable membranes have been widely used for tissue and bone regeneration due to their improved properties and the dispensable re-entry surgery for membrane removal. However, in cases with membrane exposure, this may lead to microbial contamination that will compromise the integrity of the membrane, surrounding tissue, and bone regeneration, resulting in treatment failure. Although the microbial infection can negatively influence the clinical outcomes of regenerative therapy, such as GBR and GTR, there is a lack of clinical investigations in this field, especially concerning the microbial colonization of different types of membranes. Importantly, a deeper understanding of the mechanisms of biofilm growth and composition and pathogenesis on exposed membranes is still missing, explaining the mechanisms by which bone regeneration is reduced during membrane exposure. This scoping review comprehensively screened and discussed the current in vivo evidence and possible new perspectives on the microbial contamination of resorbable membranes. Results from eligible in vivo studies suggested that different bacterial species colonized exposed membranes according to their composition (collagen, expanded polytetrafluoroethylene (non-resorbable), and polylactic acid), but in all cases, it negatively affected the attachment level and amount of bone gain. However, limited models and techniques have evaluated the newly developed materials, and evidence is scarce. Finally, new approaches to enhance the antimicrobial effect should consider changing the membrane surface or incorporating long-term released antimicrobials in an effort to achieve better clinical success.

Recent advance in biomass membranes: Fabrication, functional regulation, and antimicrobial applications

Both inorganic and polymeric membranes have been widely applied for antimicrobial applications. However, these membranes exhibit low biocompatibility, weak biodegradability, and potential toxicity to human being and environment. Biomass materials serve as excellent candidates for fabricating functional membranes to address these problems due to their unique physical, chemical, and biological properties. Here we present recent progress in the fabrication, functional regulation, and antimicrobial applications of various biomass-based membranes. We first introduce the types of biomass membranes and their fabrication methods, including the phase inversion, vacuum filtration, electrospinning, layer-by-layer self-assembly, and coating. Then, the strategies on functional regulation of biomass membranes by adding 0D, 1D, and 2D nanomaterials are presented and analyzed. In addition, antibacterial, antifungal, and antiviral applications of biomass-based functional membranes are summarized. Finally, potential development aspects of biomass membranes are discussed and prospected. This comprehensive review is valuable for guiding the design, synthesis, structural/functional tailoring, and sustainable utilization of biomass membranes.

ZnO nanoparticles-modified polycaprolactone-gelatin membranes for guided/bone tissue regeneration, antibacterial and osteogenic differentiation properties

Periodontitis is a highly prevalent infectious disease that causes the progressive destruction of the periodontal supporting tissues. If left untreated, it can lead to tooth loss impairing oral function, aesthetics, and the patient's overall quality of life. Guided and Bone Tissue Regeneration (GTR/BTR) are surgical therapies based on the placement of a membrane that prevents epithelial growth into the defect, allowing the periodontal/bone cells (including stem cells) to regenerate or restore the affected tissues. The success of these therapies is commonly affected by the local bacterial colonization of the membrane area and its fast biodegradation, causing postoperative infections and a premature rupture of the membrane limiting the regeneration process. This study presents the antibacterial and osteogenic differentiation properties of polycaprolactone-gelatin (PCL-G) electrospun membranes modified with ZnO nanoparticles (ZnO-NPs). The membranes´ chemical composition, surface roughness, biodegradation, water wettability, and mechanical properties under simulated physiological conditions, were analyzed by the close relationship with their biological properties. The PCL-G membranes modified with 1, 3, and 6% w/w of ZnO-NPs showed a significant reduction in the planktonic and biofilm formation of four clinically relevant bacteria;A. actinomycetemcomitansserotype b, P. gingivalis,E. coli, andS. epidermidis. Additionally, the membranes presented appropriate mechanical properties and biodegradation rates to be potentially used in clinical treatments. Notably, the membranes modified with the lowest concentration of ZnO-NPs (1% w/w) stimulated the production of osteoblast markers and calcium deposits in human bone marrow-derived mesenchymal stem cells (BM-MSC) and were biocompatible to human osteoblasts cells (hFOB). These results suggest that the PCL-G membranes with 1% w/w of ZnO-NPs are high-potential candidates for GTR/BTR treatments, as they were the most effective in terms of better antibacterial effectiveness at a lower NPs-concentration while creating a favorable cellular microenvironment for bone growth.

Unique Fiber Morphologies from Emulsion Electrospinning—A Case Study of Poly(ε-caprolactone) and Its Applications

The importance of electrospinning to produce biomimicking micro- and nano-fibrous matrices is realized by many who work in the area of fibers. Based on the solubility of the materials to be spun, organic solvents are typically utilized. The toxicity of the utilized organic solvent could be extremely important for various applications, including tissue engineering, biomedical, agricultural, etc. In addition, the high viscosities of such polymer solutions limit the use of high polymer concentrations and lower down productivity along with the limitations of obtaining desired fiber morphology. This emphasizes the need for a method that would allay worries about safety, toxicity, and environmental issues along with the limitations of using concentrated polymer solutions. To mitigate these issues, the use of emulsions as precursors for electrospinning has recently gained significant attention. Presence of dispersed and continuous phase in emulsion provides an easy route to incorporate sensitive bioactive functional moieties within the core-sheath fibers which otherwise could only be hardly achieved using cumbersome coaxial electrospinning process in solution or melt based approaches. This review presents a detailed understanding of emulsion behavior during electrospinning along with the role of various constituents and process parameters during fiber formation. Though many polymers have been studied for emulsion electrospinning, poly(ε-caprolactone) (PCL) is one of the most studied polymers for this technique. Therefore, electrospinning of PCL based emulsions is highlighted as unique case-study, to provide a detailed theoretical understanding, discussion of experimental results along with their suitable biomedical applications.

A pH-Responsive Asymmetric Microfluidic/Chitosan Device for Drug Release in Infective Bone Defect Treatment

Bacterial infection is currently considered to be one of the major reasons that leads to the failure of guided bone regeneration (GBR) therapy. Under the normal condition, the pH is neutral, while the microenvironment will become acid at the sites of infection. Here, we present an asymmetric microfluidic/chitosan device that can achieve pH-responsive drug release to treat bacterial infection and promote osteoblast proliferation at the same time. On-demand release of minocycline relies on a pH-sensitive hydrogel actuator, which swells significantly when exposed to the acid pH of an infected region. The PDMAEMA hydrogel had pronounced pH-sensitive properties, and a large volume transition occurred at pH 5 and 6. Over 12 h, the device enabled minocycline solution flowrates of 0.51-1.63 µg/h and 0.44-1.13 µg/h at pH 5 and 6, respectively. The asymmetric microfluidic/chitosan device exhibited excellent capabilities for inhibiting Staphylococcus aureus and Streptococcus mutans growth within 24 h. It had no negative effect on proliferation and morphology of L929 fibroblasts and MC3T3-E1 osteoblasts, which indicates good cytocompatibility. Therefore, such a pH-responsive drug release asymmetric microfluidic/chitosan device could be a promising therapeutic approach in the treatment of infective bone defects.

Research on Membranes and Their Associated Processes at the Université Paris-Est Créteil: Progress Report, Perspectives, and National and International Collaborations

Research on membranes and their associated processes was initiated in 1970 at the University of Paris XII/IUT de Créteil, which became in 2010 the University Paris-Est Créteil (UPEC). This research initially focused on the development and applications of pervaporation membranes, then concerned the metrology of ion-exchange membranes, then expanded to dialysis processes using these membranes, and recently opened to composite membranes and their applications in production or purification processes. Both experimental and fundamental aspects have been developed in parallel. This evolution has been reinforced by an opening to the French and European industries, and to the international scene, especially to the Krasnodar Membrane Institute (Kuban State University-Russia) and to the Department of Chemistry, (Qassim University-Saudi Arabia). Here, we first presented the history of this research activity, then developed the main research axes carried out at UPEC over the 2012-2022 period; then, we gave the main results obtained, and finally, showed the cross contribution of the developed collaborations. We avoided a chronological presentation of these activities and grouped them by theme: composite membranes and ion-exchange membranes. For composite membranes, we have detailed three applications: highly selective lithium-ion extraction, bleach production, and water and industrial effluent treatments. For ion-exchange membranes, we focused on their characterization methods, their use in Neutralization Dialysis for brackish water demineralization, and their fouling and antifouling processes. It appears that the research activities on membranes within UPEC are very dynamic and fruitful, and benefit from scientific exchanges with our Russian partners, which contributed to the development of strong membrane activity on water treatment within Qassim University. Finally, four main perspectives of this research activity were given: the design of autonomous and energy self-sufficient processes, refinement of characterization by Electrochemical Scanning Microscopy, functional membrane separators, and green membrane preparation and use.

In silico modelling of long bone healing involving osteoconduction and mechanical stimulation

A lot of evidence has shown the importance of stimulating cell mechanically during bone repair. In this study, we modeled the challenging fracture healing of a large bone defect in tibial diaphysis. To fill the fracture gap, we considered the implantation of a porous osteoconductive biomaterial made of poly-lactic acid wrapped by a hydrogel membrane mimicking osteogenic properties of the periosteum. We identified the optimal loading case that best promotes the formation and differentiation into bone tissue. Our results support the idea that a patient's rehabilitation program should be adapted to reproduce optimal mechanical stimulations.

The efficacy of a semi-resorbable membrane based on silk fibroin-Glycerol on bone regeneration in rabbit calvarial defects compared to a commercial collagen membrane

Silk fibroin-glycerol-based membranes were fabricated and characterized for use as a self-maintaining and non-collapsible semi-resorbable membrane in guided bone regeneration. The study assessed the bone regeneration capacity of silk fibroin-glycerol-based membranes compared to a collagen membrane in 10-mm circular bilateral calvarial defects of 20 male New Zealand white rabbits. The animals were divided into two sets of time frames of 4 and 12 weeks and allocated into four groups (n = 5/group); an empty defect (E), a collagen membrane (Bio-Gide^®; BG), a silk fibroin-glycerol-collagen membrane (SGC), and a silk fibroin-glycerol membrane (SG). The bone density (optical density, OD) from the 2D radiographs, tissue reaction from histological sections, new bone volume, and area from micro-CT and the histomorphometry were evaluated. The Mean OD of the E (34.49 ± 14.21%) and BG groups (35.71 ± 9.65%) at 12 weeks were higher than at 4 weeks, but the SGC (39.04 ± 7.94%) and SG (40.96 ± 9.25%) groups were lower at 4 weeks. The new bone volumes at 4 weeks of the SG (24.19 ± 1.35%) and SGC groups (24.19 ± 3.47%) were significantly higher than the BG group (16.93 ± 2.95%) but were not different from the E group (18.39±4.78%). At 12 weeks, the new bone volumes in the SGC (29.09 ± 3.81%), SG (29.11 ± 5.94%), and BG groups (26.26 ± 4.42%) were higher than in the E group (21.63 ± 5.81%) without statistical significance. Histological images in the SGC and SG groups showed slow biodegradation without a foreign body reaction. The new bone area at 4 weeks was lowest in BG (12.95 ± 5.44%), and the others were comparable. At 12 weeks, the new bone area in the E group (23.55±8.69%) was lower than the BG (31.42 ± 6.18%), SG (35.25 ± 13.92%), and SGC groups (36.35 ± 10.23%). Silk fibroin-glycerol-based membranes are semi-resorbable membranes that possess a self-maintaining property, have a barrier function without collapsing, and are successful in facilitating bone regeneration.

Polymeric Membranes for Biomedical Applications

Polymeric membranes are selective materials used in a wide range of applications that require separation processes, from water filtration and purification to industrial separations. Because of these materials' remarkable properties, namely, selectivity, membranes are also used in a wide range of biomedical applications that require separations. Considering the fact that most organs (apart from the heart and brain) have separation processes associated with the physiological function (kidneys, lungs, intestines, stomach, etc.), technological solutions have been developed to replace the function of these organs with the help of polymer membranes. This review presents the main biomedical applications of polymer membranes, such as hemodialysis (for chronic kidney disease), membrane-based artificial oxygenators (for artificial lung), artificial liver, artificial pancreas, and membranes for osseointegration and drug delivery systems based on membranes.

Fabrication, Structural and Biological Characterization of Zinc-Containing Bioactive Glasses and Their Use in Membranes for Guided Bone Regeneration

Polymeric membranes are widely used in guided bone regeneration (GBR), particularly in dentistry. In addition, bioactive glasses can be added to the polymers in order to develop a matrix that is osteoconductive and osteoinductive, increasing cell adhesion and proliferation. The bioactive glasses allow the insertion into its network of therapeutic ions in order to add specific biological properties. The addition of zinc into bioactive glasses can promote antibacterial activity and induce the differentiation and proliferation of the bone cells. In this study, bioactive glasses containing zinc (0.25, 0.5, 1 and 2 mol%) were developed and structurally and biologically characterized. The biological results show that the Zn-containing bioactive glasses do not present significant antibacterial activity, but the addition of zinc at the highest concentration does not compromise the bioactivity and promotes the viability of Saos-2 cells. The cell culture assays in the membranes (PCL, PCL:BG and PCL:BGZn2) showed that zinc addition promotes cell viability and an increase in alkaline phosphatase (ALP) production.

In vitro evaluation of crosslinked bovine pericardium as potential scaffold for the oral cavity

BACKGROUND

Bovine pericardium (BP) is a scaffold widely used in soft tissues regeneration; however, its calcification in contact with glutaraldehyde, represent an opportunity for its application in hard tissues, such as bone in the oral cavity.

OBJECTIVE

To develop and to characterize decellularized and glutaraldehyde-crosslinked bovine pericardium (GC-BP) as a potential scaffold for guided bone regeneration GBR.

METHODS

BP samples from healthy animals of the bovine zebu breed were decellularized and crosslinked by digestion with detergents and glutaraldehyde respectively. The resulting cell-free scaffold was physical, chemical, mechanical, and biologically characterized thought hematoxylin and eosin staining, DNA quantification, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), uniaxial tensile test, cell viability and live and dead assay in cultures of dental pulp stem cells (DPSCs).

RESULTS

The decellularization and crosslinking of BP appeared to induce conformational changes of the CLG molecules, which led to lower mechanical properties at the GC-BP scaffold, at the same time that promoted cell adhesion and viability of DPSCs.

CONCLUSION

This study suggests that the decellularized and GC-BP is a scaffold with the potential to be used promoting DPSCs recruitment, which has a great impact on the dental area.

The improvement of periodontal tissue regeneration using a 3D-printed carbon nanotube/chitosan/sodium alginate composite scaffold

Periodontal disease is a common disease in the oral field, and many researchers are studying periodontal disease and try to find some biological scaffold materials to make periodontal tissue regenerative. In this study, we attempted to construct a carbon nanotube/chitosan/sodium alginate (CNT/CS/AL) ternary composite hydrogel and then prepare porous scaffold by 3D printing technology. Subsequently, characterizing the materials and testing the mechanical properties of the scaffold. Additionally, its effect on the proliferation of human periodontal ligament cells (hPDLCs) and its antibacterial effect on Porphyromonas gingivalis were detected. We found that CNT/CS/AL porous composite scaffolds with uniform pores could be successfully prepared. Moreover, with increasing CNT concentration, the degradation rate and the swelling degree of scaffold showed a downward trend. The compressive strength test indicated the elastic modulus of composite scaffolds ranged from 18 to 80 kPa, and 1% CNT/CS/AL group had the highest quantitative value. Subsequently, cell experiments showed that the CNT/CS/AL scaffold had good biocompatibility and could promote the proliferation of hPDLCs. Among 0.1%-1% CNT/CS/AL groups, the biocompatibility of 0.5% CNT/CS/AL scaffold performed best. Meanwhile, in vitro antibacterial experiments showed that the CNT/CS/AL scaffold had a certain bacteriostatic effect on P. gingivalis. When the concentration of CNT was more than 0.5%, the antimicrobial activity of composite scaffold was significantly promoted, and about 30% bacteria were inactivated. In conclusion, this 3D-printed CNT/CS/AL composite scaffold, with good material properties, biocompatibility and bacteriostatic activity, may be used for periodontal tissue regeneration, providing a new avenue for the treatment of periodontal disease.

Application of Tissue Engineering in Manufacturing Absorbable Membranes to Improve the Osteopromoting Potential of Collagen

The membranes are an important biomaterial that contribute to osteopromotion. This study aimed to evaluate the osteopromotive potential of collagen membranes associated with Hydroxyapatite (HA) in critical size calvaria rat's defects. Ninety-six Albinus Wistar rats were divided into four groups: (CG) negative control: clot only (CG); positive control: porcine collagen membrane (BG); fish collagen membrane associated with HA (CP); bovine collagen membrane associated with HA (CB), analyzed at 7, 15, 30, and 60 postoperative days. At 30 days, membrane integrity was observed in the CB and fragments in the CP and BG groups were dispersed in the center of the defect. At 60 days, BG demonstrated better results with no statistical difference for the CP group (p = 0.199) and a statistically significant difference for the CB group (p = 0.013). The inflammatory profiles of the BG and CP groups were similar. Immunohistochemistry demonstrated at 60 days moderate osteopontin staining for the BG and CP groups, light staining for the CB, and intense osteocalcin staining for the BG, while the CB and CP groups demonstrated moderate staining. Microtomography revealed the highest mean bone volume (14.247 mm³) in the BG, followed by the CB (11.850 mm³), and CP (9.560 mm³) group. The collagen membranes associated with HA demonstrated an osteopromotive potential.

Polycaprolactone versus collagen membrane and 1‐year clinical outcomes: A randomized controlled trial

BACKGROUND

Polycaprolactone (PCL) is a synthetic aliphatic polyester widely used in biomedical applications with biodegradability in the body and promotes cell proliferation and differentiation. A newly developed bilayered PCL membrane was developed for possibly being used as a membrane in guided bone regeneration (GBR).

PURPOSE

To compare the clinical efficacy between a newly developed bilayered PCL membrane with a Cytoplast™ RTM collagen membrane for GBR with simultaneous implant placement.

MATERIALS AND METHODS

Twenty-four patients were randomized to PCL or RTM group, and a total of 24 dental implants were placed. Primary outcomes were patient mean buccal bone thickness (BBT) immediately postimplantation and at 6 months using cone-beam CT and soft tissue surface dimensional changes (STC) at crown insertion, 6 months, and 1 year after loading using intraoral scanner. Secondary outcomes included success rate, clinical parameters, healing index, implant stability, pink esthetic score, and marginal bone levels.

RESULTS

The percentage of reduced BBT at 6 months was 32.38%, 25.94%, and 23.96% in the test group and 34.42%, 14.75%, and 6.34% in the control group at the corresponding levels. The mean difference of changed BBT associated with PCL membrane, when compared to collagen membrane, at 6 months was -0.02 ± 0.18 mm (95% confidence interval [CI]: -0.40 to 0.35), 0.29 ± 0.28 mm (95% CI: -0.29 to 0.87), and 0.62 ± 0.38 mm (95% CI: -0.17 to 1.42) at 0, 2, and 4 mm from implant shoulder. Minimal loss of STC was observed in both groups up to 1 year of loading. The mean difference loss of surface dimensional change associated with PCL membrane, when compared to collagen membrane, at 1 year of loading was 0.31 ± 0.19 mm (95% CI: -0.07 to 0.70), 0.22 ± 0.26 mm (95% CI: -0.33 to 0.76), and 0.17 ± 0.30 mm (95% CI: -0.45 to 0.78) at 0, 2, and 4 mm from implant shoulder. None of these differences were statistically significant (unpaired t-test, degrees of freedom [df] = 22; p > 0.05).

CONCLUSION

Within the limits of this trial, both barrier membranes resulted in comparable outcomes for GBR with implant placement after 1 year in function. Further research is necessary with a larger sample size.

Barrier Membranes for Guided Bone Regeneration (GBR): A Focus on Recent Advances in Collagen Membranes

Guided bone regeneration (GBR) has become a clinically standard modality for the treatment of localized jawbone defects. Barrier membranes play an important role in this process by preventing soft tissue invasion outgoing from the mucosa and creating an underlying space to support bone growth. Different membrane types provide different biological mechanisms due to their different origins, preparation methods and structures. Among them, collagen membranes have attracted great interest due to their excellent biological properties and desired bone regeneration results to non-absorbable membranes even without a second surgery for removal. This work provides a comparative summary of common barrier membranes used in GBR, focusing on recent advances in collagen membranes and their biological mechanisms. In conclusion, the review article highlights the biological and regenerative properties of currently available barrier membranes with a particular focus on bioresorbable collagen-based materials. In addition, the advantages and disadvantages of these biomaterials are highlighted, and possible improvements for future material developments are summarized.

Silk fibroin scaffolds: A promising candidate for bone regeneration

It remains a big challenge in clinical practice to repair large-sized bone defects and many factors limit the application of autografts and allografts, The application of exogenous scaffolds is an alternate strategy for bone regeneration, among which the silk fibroin (SF) scaffold is a promising candidate. Due to the advantages of excellent biocompatibility, satisfying mechanical property, controllable biodegradability and structural adjustability, SF scaffolds exhibit great potential in bone regeneration with the help of well-designed structures, bioactive components and functional surface modification. This review will summarize the cell and tissue interaction with SF scaffolds, techniques to fabricate SF-based scaffolds and modifications of SF scaffolds to enhance osteogenesis, which will provide a deep and comprehensive insight into SF scaffolds and inspire the design and fabrication of novel SF scaffolds for superior osteogenic performance. However, there still needs more comprehensive efforts to promote better clinical translation of SF scaffolds, including more experiments in big animal models and clinical trials. Furthermore, deeper investigations are also in demand to reveal the degradation and clearing mechanisms of SF scaffolds and evaluate the influence of degradation products.

Factors Controlling Degradation of Biologically Relevant Synthetic Polymers in Solution and Solid State

The field of biodegradable synthetic polymers, which is central for regenerative engineering and drug delivery applications, encompasses a multitude of hydrolytically sensitive macromolecular structures and diverse processing approaches. The ideal degradation behavior for a specific life science application must comply with a set of requirements, which include a clinically relevant kinetic profile, adequate biocompatibility, benign degradation products, and controlled structural evolution. Although significant advances have been made in tailoring materials characteristics to satisfy these requirements, the impacts of autocatalytic reactions and microenvironments are often overlooked resulting in uncontrollable and unpredictable outcomes. Therefore, roles of surface versus bulk erosion, in situ microenvironment, and autocatalytic mechanisms should be understood to enable rational design of degradable systems. In an attempt to individually evaluate the physical state and form factors influencing autocatalytic hydrolysis of degradable polymers, this Review follows a hierarchical analysis that starts with hydrolytic degradation of water-soluble polymers before building up to 2D-like materials, such as ultrathin coatings and capsules, and then to solid-state degradation. We argue that chemical reactivity largely governs solution degradation while diffusivity and geometry control the degradation of bulk materials, with thin "2D" materials remaining largely unexplored. Following this classification, this Review explores techniques to analyze degradation in vitro and in vivo and summarizes recent advances toward understanding degradation behavior for traditional and innovative polymer systems. Finally, we highlight challenges encountered in analytical methodology and standardization of results and provide perspective on the future trends in the development of biodegradable polymers.

Synthesis and Biocompatibility Evaluation of PCL Electrospun Membranes Coated with MTA/HA for Potential Application in Dental Pulp Capping

This study aimed to develop polycaprolactone (PCL) electrospun membranes coated with mineral trioxide aggregate/hydroxyapatite (MTA/HA) as a potential material for dental pulp capping. Initially, the PCL membrane was prepared by an electrospinning process, which was further surface coated with MTA (labeled as PCLMTA) and HA (labeled as PCLHA). The physico-chemical characterization of the fabricated membranes was carried out using field emission scanning electron microscopy (FE-SEM)/Energy dispersive X-ray (EDX), X-ray diffraction (XRD), Raman spectroscopy, and contact angle analysis. The biocompatibility of the human dental pulp stem cells (hDPSCs) on the fabricated membranes was checked by XTT assay, and the hDPSCs adhesion and spreading were assessed by FE-SEM and confocal microscopy. The wound healing ability of hDPSCs in response to different electrospun membrane extracts was examined by scratch assay. The surface morphology analysis of the membranes by FE-SEM demonstrated a uniform nanofibrous texture with an average fiber diameter of 594 ± 124 nm for PCL, 517 ± 159 nm for PCLHA, and 490 ± 162 nm for PCLMTA. The elemental analysis of the PCLHA membrane indicated the presence of calcium and phosphorous elements related to HA, whereas the PCLMTA membrane showed the presence of calcium and silicate, related to MTA. The presence of MTA and HA in the PCL membranes was also confirmed by Raman spectroscopy. The water contact analysis demonstrated the hydrophobic nature of the membranes. The results indicated that PCL, PCLHA, and PCLMTA membranes were biocompatible, while PCLMTA exhibited better cell adhesion, spreading, and migration.

Pea pod-mimicking hydroxyapatite nanowhisker-reinforced poly(lactic acid) composites with bone-like strength

The anisotropic hierarchical structures of naturally derived materials have offered useful design principles for the fabrication of high-strength and functional materials. Herein, we unraveled a structure-by-bionics approach to construction of pea pod-mimicking architecture for poly(lactic acid) (PLA) composites impregnated with hydroxyapatite nanowhiskers (HANWs). The HANWs (length of 80-120 nm, diameter of ~30 nm) were customized using microwave-assisted aqueous biomineralization at minute level, which were incorporated into PLA microfibers by electrospinning with filler loadings of 10-30 wt%. The membranes comprising HANW-modified PLA microfibers were stacked and structured into composite films, strategically involving high-pressure compression at a relatively low temperature to impart the confined structuring mechanisms. It thus allowed partial melting and thinning of PLA microfibers into nanofibers, onto which the discrete HANWs were tightly adhered and embedded, showing distinguished architectural configurations identical with pea pod. More importantly, the mechanical properties and bioactivity were remarkably promoted, as demonstrated by the increments of over 54 % and nearly 72 % for the yield strength and elastic modulus (71.6 and 2547 MPa) of the structured composite loaded 30 wt% HANWs compared to those of pure PLA (46.4 and 1484 MPa), as accompanied by significant improvements in the bioactivity to nucleate and create apatite entities in mineral solution. The unusual combination of excellent biological characteristics and bone-like mechanical elasticity and extensibility make the structured PLA composites promising for guided bone/tissue regeneration therapy.

Fibre-guiding biphasic scaffold for perpendicular periodontal ligament attachment

Periodontal regeneration is characterized by the attachment of oblique periodontal ligament fibres on the tooth root surface. To facilitate periodontal ligament attachment, a fibre-guiding tissue engineered biphasic construct was manufactured by melt electrowriting (MEW) for influencing reproducible cell guidance and tissue orientation. The biphasic scaffold contained fibre-guiding features in the periodontal ligament component comprising of 100 µm spaced channels (100CH), a pore size gradient in the bone component and maintained a highly porous and fully interconnected interface between the compartments. The efficacy of the fibre-guiding channels was assessed in an ectopic periodontal attachment model in immunocompromised rats. This demonstrated an unprecedented and systematic tissue alignment perpendicular to the dentin in the 100CH group, resulting in the close mimicry of native periodontal ligament architecture. In addition, the histology revealed high levels of tissue integration between the two compartments as observed by the perpendicular collagen attachment on the dentin surface, which also extended and infiltrated the scaffold's bone compartment. In conclusion, the 100 µm fibre-guiding scaffold induced a systematic tissue orientation at the dentin-ligament interface, resembling the native periodontium and thus resulting in enhanced alignment mimicking periodontal ligament regeneration. STATEMENT OF SIGNIFICANCE: Periodontitis is a prevalent inflammatory disease affecting a large portion of the adult population and leading to the destruction of the tooth-supporting structures (alveolar bone, periodontal ligament, and cementum). Current surgical treatments are unpredictable and generally result in repair rather than functional regeneration. A key feature of functional regeneration is the re-insertion of the oblique or perpendicularly orientated periodontal ligament fibre in both the alveolar bone and root surface. This study demonstrates that a highly porous scaffold featuring 100 µm width channels manufactured by the stacking of melt electrospun fibres, induced perpendicular alignment and attachment of the neo-ligament onto a dentine surface. The fibre guiding micro-architecture may pave the way for enhanced and more functional regeneration of the periodontium.

Effect of Different Membranes on Vertical Bone Regeneration: A Systematic Review and Network Meta-Analysis

This study is aimed at performing a systematic review and a network meta-analysis of the effects of several membranes on vertical bone regeneration and clinical complications in guided bone regeneration (GBR) or guided tissue regeneration (GTR). We compared the effects of the following membranes: high-density polytetrafluoroethylene (d-PTFE), expanded polytetrafluoroethylene (e-PTFE), crosslinked collagen membrane (CCM), noncrosslinked collagen membrane (CM), titanium mesh (TM), titanium mesh plus noncrosslinked (TM + CM), titanium mesh plus crosslinked (TM + CCM), titanium-reinforced d-PTFE, titanium-reinforced e-PTFE, polylactic acid (PLA), polyethylene glycol (PEG), and polylactic acid 910 (PLA910). Using the PICOS principles to help determine inclusion criteria, articles are collected using PubMed, Web of Science, and other databases. Assess the risk of deviation and the quality of evidence using the Cochrane Evaluation Manual, and GRADE. 27 articles were finally included. 19 articles were included in a network meta-analysis with vertical bone increment as an outcome measure. The network meta-analysis includes network diagrams, paired-comparison forest diagrams, funnel diagrams, surface under the cumulative ranking curve (SUCRA) diagrams, and sensitivity analysis diagrams. SUCRA indicated that titanium-reinforced d-PTFE exhibited the highest vertical bone increment effect. Meanwhile, we analyzed the complications of 19 studies and found that soft tissue injury and membrane exposure were the most common complications.

Recent advances and challenges in graphene-based nanocomposite scaffolds for tissue engineering application

Graphene-based nanocomposites have recently attracted increasing attention in tissue engineering because of their extraordinary features. These biocompatible substances, in the presence of an apt microenvironment, can stimulate and sustain the growth and differentiation of stem cells into different lineages. This review discusses the characteristics of graphene and its derivatives, such as their excellent electrical signal transduction, carrier mobility, outstanding mechanical strength with improving surface characteristics, self-lubrication, antiwear properties, enormous specific surface area, and ease of functional group modification. Moreover, safety issues in the application of graphene and its derivatives in terms of biocompatibility, toxicity, and interaction with immune cells are discussed. We also describe the applicability of graphene-based nanocomposites in tissue healing and organ regeneration, particularly in the bone, cartilage, teeth, neurons, heart, skeletal muscle, and skin. The impacts of special textural and structural characteristics of graphene-based nanomaterials on the regeneration of various tissues are highlighted. Finally, the present review gives some hints on future research for the transformation of these exciting materials in clinical studies.

3D-printed bi-layered polymer/hydrogel construct for interfacial tissue regeneration in a canine model

OBJECTIVES

There are complications in applying regenerative strategies at the interface of hard and soft tissues due to the limited designs of constructs that can accommodate different cell types in different sites. The problem originates from the challenges in the adhesion of dissimilar materials, such as polymers and hydrogels, that can be suitable for regenerating different tissues such as bone and soft tissues. This paper presents a design of a new hybrid construct in which a polymer (polycaprolactone (PCL)) membrane firmly adheres to a layer of hydrogen (gelatin).

METHODS

PCL membranes with defined size and porosity were fabricated using 3D printing. The gelatin layer was attached to the PCL membranes using the aminolysis procedure. We have examined this construct for the application of Guided Bone Regeneration (GBR) as a typical surgical regenerative procedure of the oral cavity at the interface of bone and soft tissue. Complete in vitro and in vivo investigations on canine tibia bone defects have been performed. Histological analyses for fibrosis morphometric and bone morphometric evaluation, as well as bone-fibrosis histological grading and CBCT imaging, were conducted.

RESULTS

Chemical and morphological studies of the membrane proved that gelatin was uniformly attached to the aminolyzed PCL membranes. The in vitro and in vivo studies indicated the membrane's biocompatibility, mechanical stability, and barrier function for the GBR application. Furthermore, in vitro study showed that the membranes could improve osteogenesis and the regeneration of bone defects. The results illustrated that the mean bone density in the membrane groups was about three times more than that of the control group.

SIGNIFICANCE

The fabricated 3D-printed hybrid Gelatin/PCL bi-layered membrane can be a good candidate for interfacial tissue engineering and a promising membrane for GBR procedure.