Antibacterial and Antifungal Activity of Novel Synthesized Neodymium-Substituted Cobalt Ferrite Nanoparticles for Biomedical Application

Potential antifungal applications of heterometallic silica nanohybrids: A synergistic activity

An estimated 1.7 million fatalities and 150 million cases worldwide are attributed to fungal infections annually, that are in rise due to immunocompromised patient population. The challenges posed by traditional treatments can be addressed with the help of nanotechnology advancements. In this study, Co, Cu, and Ag-were doped into silica nanoparticles. Then the synthesized monometallic silica nanohybrids were combined to formulate heterometallic silica nanohybrids, characterized structurally and morphologically, compared, and evaluated for antifungal activity based on their individual and synergistic activity. The antifungal assays were conducted by using ATCC cultures of Candida albicans and QC samples of Trichophyton rubrum, Microsporum gypseum, and Aspergillus niger. The MIC (ranging from 49.00 to 1560.00 μg/mL), MFC (ranging from 197.00 to 3125.00 μg/mL), IC50 values (ranging from 31.10 to 400.80 μg/mL), and FICI of nanohybrids were determined and compared. Moreover, well diffusion assay was performed. ABTS assay and DPPH assay were conducted to investigate the radical scavenging activity (RSA) of nanohybrids. SEM analysis clearly evidenced the structural deformations of each fungal cells and spores due to the treatment with trimetallic nanohybrid. According to the results, the trimetallic silica nanohybrids exhibited the most powerful synergistic RSA and the most effective antifungal activity, compared to the bimetallic silica nanohybrids.

Ecofriendly fabrication of cobalt nanoparticles using Azadirachta indica (neem) for effective inhibition of Candida-like fungal infection in medicated nano-coated textile

This study involves the formulation of cobalt nanoparticles by means of ethanolic Azadirachta indica (neem) extract (CoNP@N). Later, the formulated buildup was incorporated into cotton fabric in order to mitigate antifungal infection. Optimization of the formulation was carried out by considering the effect of plant concentration, temperature, and revolutions per minute (rpm) used, through design of the experiment (DOE), response surface methodology (RSM), and ANOVA of the synthetic procedure. Hence, graph was potted with the aid of effecting parameters and the related factors (size of particle and zeta potential). Further characterization of nanoparticles was performed through scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Attenuated total reflection-Fourier transform infrared (ATR-FTIR) was considered for the detection of functional groups. The structural property of CoNP@N was calculated with the aid of powder X-ray diffraction (PXRD). The surface property was measured with the use of a surface area analyzer (SAA). The values of Inhibition concentration (IC50) and zone of inhibition (ZOI), were calculated, so as to determine the antifungal property against both the strains (Candida albicans, MTCC 227and Aspergillus niger, MTCC 8652). The further nano-coated cloth was subjected to a durability test, and hence the cloth was washed (through the purpose of time 0; 10; 25; and 50 washing cycles), and then its anti-fungal operation to a couple of strains was retained. Primarily, 51 μg/ml of cobalt nanoparticles incorporated on the cloth was retained but after 50 washing cycles in 500 ml of purified water, the cloth showed more efficiency contrary to C. albicans than towards A. niger.

Abatement of microbes and organic pollutants using heterostructural nanocomposites of rice straw CQDs with substituted strontium ferrite

Sustainable use of agricultural waste still remains a challenging task. Herein, we used rice straw as a carbon precursor to prepare carbon quantum dots (CQDs) for photocatalytic applications. Nanocomposites of CQDs with Ti4+ and Mg2+ substituted strontium ferrite (Sr0·4Ti0·4Mg0·2Fe2O4.4) nanoparticles (NPs) in varying w:w ratio was synthesized by ultrasonication method. The successful formation of nanocomposites was confirmed by various microscopic and spectroscopic techniques. The photocatalytic and antibacterial activity of NPs, CQDs and nanocomposites was comparatively evaluated using tetracycline hydrochloride, azure B, Staphylococcus aureus and Escherichia coli as model pollutants. The CQDs-Sr0.4Ti0·4Mg0·2Fe2O4.4 nanocomposite with a w:w ratio of 2:1 showed excellent photocatalytic and antibacterial activity, with the degradation and inactivation efficiency ranging from 97.1% to 99.0% in presence of visible light. The increased specific surface area (117.2 m2/g), and reduction in band gap (2.48 eV-2.09 eV) and decreased photoluminescence intensity of nanocomposites all corroborated these results. The impacting experimental parameters such as catalyst dose, pH and contact time were also examined. Quenching experiments confirmed that hydroxyl radicals (HO∙) radicals and holes (h+) played a vital role in the degradation of pollutants. The kinetics of photodegradation was explained by using the Langmuir-Hinshelwood model. Box-Behnken statistical modelling was used to optimize photocatalytic parameters. Results indicated that the nanocomposite of CQDs with Sr0·4Ti0·4Mg0·2Fe2O4.4 can serve as a promising photocatalyst for the removal of pollutants and microbes.

Enhancing antioxidant properties of CeO2 nanoparticles with Nd3+ doping: structural, biological, and machine learning insights

The antioxidant capabilities of nanoparticles are contingent upon various factors, including their shape, size, and chemical composition. Herein, novel Nd-doped CeO2 nanoparticles were synthesized and the neodymium content was varied to investigate the synergistic impact on the antioxidant properties of CeO2 nanoparticles. Incorporating Nd3+ induced changes in lattice parameters and significantly altered the morphology from nanoparticles to nanorods. The biological activity of Nd-doped CeO2 was examined against pathogenic bacterial strains, breast cancer cell lines, and antioxidant models. The antibacterial and anticancer activities of nanoparticles were not observed, which could be associated with the Ce3+/Ce4+ ratio. Notably, the incorporation of neodymium improved the antioxidant capacity of CeO2. Machine learning techniques were employed to forecast the antioxidant activity to enhance understanding and predictive capabilities. Among these models, the random forest model exhibited the highest accuracy at 96.35%, establishing it as a robust computational tool for elucidating the biological behavior of Nd-doped CeO2 nanoparticles. This study presents the first exploration of the influence of Nd3+ on the structural, optical, and biological attributes of CeO2, contributing valuable insights and extending the application of machine learning in predicting the therapeutic efficacy of inorganic nanomaterials.

Antibacterial activity of novel synthesized chitosan-graft-poly(N-tertiary butylacrylamide)/neodymium composites for biomedical application

In this present study, composites of chitosan-graft-poly(N-tertiary butylacrylamide) (CH-graft-poly(N-tert-BAAm)) copolymer, with Neodymium (Nd), an important rare earth element, were prepared by precipitation technique. Nd was successfully incorporated into the polymer of different weight percentages (0.5%, 1%, and 2%) without any degradation. The effect of neodymium additives on the structural, morphological, and antibacterial activities against gram-positive bacteria and gram-negative bacteria of the polymer was analyzed using various instrument techniques. X-ray diffraction (XRD) results together with Fourier Transform Infrared (FT-IR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) studies confirmed the morphology of Nd-doped CH-graft-poly(N-tert-BAAm) composites without any other impurities. The antibacterial effect of Nd was studied by adding it to the copolymer in a weight ratio of 0.5%-2%. The antibacterial effect of neodymium concentration on four different strains of bacteria was investigated: Escherichia coli (ATCC 25922) (E. coli), Pseudomonas aeruginosa (DSM 50071) (P. aeruginosa), Bacillus subtilis (DSM 1971) (B. subtilis), and Staphylococcus aureus subsp. aureus (ATCC 25923) (S. aureus). The antibacterial activities of the obtained composites were determined using the Agar Well Diffusion Assay Method. Experimental results show that Nd binds well to CH-graft-poly(N-tert-BAAm). Activity against E. coli, P. aeruginosa, B. subtilis, and S. aureus subsp. aureus creates a potential for pharmaceutical and biomedical applications.

Magnetic properties, critical behaviors and magnetocaloric effect in non-stoichiometric spinel type Co1+xCrxFe2-xO4

The magnetic properties, magnetocaloric effect, and critical analysis of magnetic behavior of Co_1+xCr_xFe_2-xO₄ (x = 0.125, 0.250, 0.375, and 0.500) with a non-stoichiometric ratio are studied in detail. All the synthesized samples exhibit single-domain behavior. The Cr³⁺ associated with excess Co²⁺ led to tuning the magnetic moment, exchange interaction, magnetocrystalline anisotropy constant, and microwave frequency. The second-order magnetic phase transition has been confirmed from the Arrot and Arrot-Noakes plots for all the samples. The Cr³⁺ associated with excess Co²⁺ also tuned the magnetocaloric (MCE) properties showing the maximum relative cooling power of 156 J kg^-1, which is a higher value than that of previously reported Cr³⁺ substituted stoichiometric cobalt ferrite. The reliability of MCE and the nature of the magnetic phase transition of the investigated samples are confirmed by analyzing the critical exponent analysis, universal curve scaling, and scaling analysis of MCE.

Effect of rare earth oxide microparticles on mechanical, corrosion, antibacterial, and hemolytic behavior of Mg-Hydroxyapatite composite for orthopedic applications - A preliminary in-vitro study

The current study focused on developing a multifunctional Mg-based biodegradable composite that mitigates the trade-off between strength, antibacterial, and cytotoxicity behavior for orthopedic bone implants. The composite has been reinforced with natural mineral-based Hydroxyapatite and rare earth oxide (REO): Neodymium oxide. The effect of different concentrations of REO on the mechanical, antibacterial, and corrosion properties was analyzed. The antibacterial properties were assessed against gram-positive B. Subtilis and gram-negative E. Coli bacterial pathogens. Moreover, the cytotoxicity of the composites was assessed via Hemolysis percentage calculations. In addition, the microstructure characterization was performed via FESEM, XRD, and EDS techniques, and different intermetallic phase formations were recorded. Contact angle measurements were done via the sessile drop method to analyze the impact of rare earth oxide on the surface properties of the synthesized composites and their relationship with bacterial adhesion. The corrosion studies and swelling rates were performed under PBS and DMEM solutions. The composite with the addition of 1.5% REO outperformed the experiments with a compressive strength of 126.4 MPa, and a corrosion rate less than 0.2 mm/yr. The corrosion rates and degree of swelling were seen to be more stable in DMEM solution as compared to PBS. Improved antibacterial rates were observed against both pathogens after the addition of REO along with a hemolysis percentage less than 5% for Mg-HA-1.5Nd₂ O₃ . The composites showed increased hydrophobicity (>75%) by the addition of 1.5% REO. Hence, it was concluded that REO (Nd₂ O₃ ) addition to the Mg-Hydroxyapatite composite is a feasible choice as a biomaterial for bone implant applications.

Bioinorganic Preparation of Hydroxyapatite and Rare Earth Substituted Hydroxyapatite for Biomaterials Applications

Rare Earth elements in the lanthanide series are regarded as one of the finest options for the cationic substitution of calcium ions in hydroxyapatite (HA) because of their favorable impact on the biological characteristics of substituted HA. Neodymium and cerium were used to substitute 5% of calcium ions in HA, prepared via the wet precipitation method. Characterization tests for pure and substituted HA were conducted using XRD, FTIR, EDS, and FESEM. The results showed that changing part from calcium ions in hydroxyapatite to Nd and Ce ions altered its structure, composition, and morphology. Regarding the biological tests, the cytotoxicity test revealed a change in IC₅₀ for both normal and cancer cell lines, where substitution part of the Ca ions with rare Earth elements led to increasing antitumor activity in comparison with HA without substitution; in addition, antibacterial and fungicide activity was evident for both HA and Nd-Ce/HA, with a modest increase in antibacterial activity of Nd-Ce/HA against S. epidermidis and E. coli in comparison with HA. These findings may shed light on the process by which Nd and Ce ions improve the biological characteristics of pure HA and the increased potential of these bioceramics.

Production and Biomedical Applications of Bioactive Compounds

The development of drug resistance to presently available synthetic medicines leads us to investigate naturally produced small bioactive molecules to treat drug-resistant diseases, such as cancer and other diseases [...]

Green synthesis of ionic liquid mediated neodymium oxide nanoparticles via Couroupita guianensis abul leaves extract with its biological applications

Bio-nanoparticles have created a new era of rapid, harmless and nontoxic drugs for various biomedical applications. The nanoparticles (NPs) of rare earth metal oxides attract researcher's attention due to their excellent chemical and physical properties that exhibit potential activity against disease causing pathogens. Couroupita guianensis (C. guianensis) abul is a medicinal plant whose leaves are effectively used for the synthesis of neodymium oxide (Nd₂O₃) NPs. The 1-butyl 3-methyl imidazolium tetrafluoroborate (BMIM BF₄) ionic liquid is used as a stabilizing agent to get better the morphology and biological properties of Nd₂O₃ NPs. 1-Butene, 4,4-diethoxy-2-methyl is the main compound in C. guianensis abul leaves extract was confirmed by GCMS analysis. The structure of synthesized Nd₂O₃ (without ionic liquid) and Nd₂O₃-IL (with ionic liquid) NPs is identified by powder X-ray diffraction (PXRD). The vibrations of the different functional groups were investigated by Fourier-transform infrared (FTIR) and Raman spectroscopy. In UV-Vis spectra, the optical absorption was identified to be 210 and 221nm of Nd₂O₃ and Nd₂O₃-IL samples and the PL spectrum provides blue and green emission peaks at 386 and 554 nm. The X-ray photoelectron spectroscopy (XPS) and DLS spectra illustrate the electronic configuration and particle size of the synthesized Nd₂O₃-IL NPs. The morphology, surface nature and lattice spacing were analyzed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The purity and weight percentage of the compound presented can be identified by the energy-dispersive X-ray spectroscopy (EDX). The biomedical properties such as antibacterial, antioxidant, antidiabetic, anti-inflammatory and anticancer activities were investigated. Finally, the overall biocompatible studies reveal that the ionic liquid assisted Nd₂O₃ NPs can be considered as a potential drug for pharmaceutical and biomedical applications.

Antimicrobial Efficacy of Biogenic Cobalt and Copper Nanoparticles against Pathogenic Isolates

Biogenic synthesis of cobalt (Co) and copper (Cu) nanoparticles (NPs) was performed using the bacterial strains Escherichia coli and Bacillus subtilis. Prepared NPs were confirmed by a color change to maroon for CoNPs and green for CuNPs. The NPs characterization using FTIR showed the presence of functional groups, i.e., phenols, acids, protein, and aromatics present in the Co and CuNPs. UV-vis spectroscopy of E. coli and B. subtilis CuNPs showed peaks at 550 and 625 nm, respectively. For E. coli and B. subtilis CoNPs, peaks were observed at 300 nm and 350 nm, respectively. Antibacterial and antifungal activity of B. subtilis and E. coli Co and CuNPs was determined at 100 mg/mL concentration against two bacterial strains at 5, 2.5, and 1.5 mg/mL against fungal two strains F. oxysporum and T. viridi, respectively. B. subtilis CuNPs showed significantly higher inhibition zones (ZOI=25.7-29.7 mm) against E. coli and B. subtilis compared to other biogenic NPs. Likewise, B. Subtilis CuNPs showed lower MIC (4.3 ± 6.3) and MBC (5.3 mg/mL) values against both tested isolates. Antifungal activity of B. subtilis and E. coli CuNPs and CoNPs showed a concentration-dependent decrease in ZOI. Among all biogenic NPs, B. subtilis CoNPs showed the highest ZOI (25-30 mm) against F. oxysporum followed by E. coli CuNPs with maximum ZOI (20-27 mm) against T. viridi. Again, B. subtilis CoNPs and E. coli CuNPs showed lowest MIC and MFC values against both fungal isolates. In conclusion, the current study showed that biogenically synthesized B. subtilis Cu or CoNPs can be used as effective antimicrobial agents due to their potential antibacterial and antifungal potential.

Sol-Gel Synthesis of Dy-Substituted Ni0.4Cu0.2Zn0.4(Fe2-xDyx)O4 Nano Spinel Ferrites and Evaluation of Their Antibacterial, Antifungal, Antibiofilm and Anticancer Potentialities for Biomedical Application

Background

The constant rise of microbial biofilm formation and drug resistance to existing antimicrobial drugs poses a significant threat to community health around the world because it reduces the efficacy and efficiency of treatments, increasing morbidity, mortality, and health-care expenditures. As a result, there is an urgent need to develop novel antimicrobial agents that inhibit microbial biofilm formation.

Methods

The [Ni_0.4Cu_0.2Zn_0.4](Fe_2-xDy_x)O₄(x≤0.04) (Ni-Cu-Zn) nano spinel ferrites (NSFs) have been synthesized by the sol–gel auto-combustion process and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray (EDX) and transmission electron microscopy (TEM). The antimicrobial, antibiofilm and antiproliferative activities of Ni-Cu-Zn NSFs were also examined.

Results

The XRD pattern confirms the secondary phase DyFeO₃ and Fe₂O₃ for substituted Dy³⁺ samples, and the crystallite size ranged from 10 to 19 nm. TEM analysis of NSFs revealed that the particles were cube-shaped and 15nm in size. NSFs exhibited significant antimicrobial, antibiofilm and antiproliferative activity. At concentration of 1 mg/mL, it was found that the NSFs (ie, x=0.0, x=0.01, x=0.02, x=0.03 and x=0.04) inhibit biofilm formation by 27.6, 26.2, 58.5, 33.3 and 25% for methicillin-resistant Staphylococcus aureus (MRSA) and 47.5, 43.5, 48.6, 58.3 and 26.6% for Candida albicans, respectively. SEM images demonstrate that treating MRSA and C. albicans biofilms with NSFs significantly reduces cell adhesion, colonization and destruction of biofilm architecture and extracellular polymeric substances matrices. Additionally, SEM and TEM examination revealed that NSFs extensively damaged the cell walls and membranes of MRSA and C. albicans. Huge ultrastructural alteration such as deformation, disintegration and separation of cell wall and membrane from the cells was observed, indicating significant loss of membrane integrity, which eventually led to cell death. Furthermore, it was observed that NSF inhibited the cancer cell growth and proliferation of HCT-116 in a dose-dependent manner.

Conclusion

The current study demonstrated that the synthesized Ni-Cu-Zn NSFs could be used to develop potential antimicrobial surface coatings agents for a varieties of biomedical-related materials and devices in order to prevent the biofilms formation and their colonization. Furthermore, the enhanced antiproliferative properties of manufactured SNFs suggest a wide range of biomedical applications.

Al-Suhaimi E, Hussain M, Yousuf Bari M, Mehmood Ali S, Al-Jameel SS, Slimani Y, Khan FA, Baykal A. Ultrasonic Synthesis and Biomedical Application of Mn0.5Zn0.5ErxYxFe2-2xO4 Nanoparticles

In the present study, biocompatible manganese nanoparticles have been linked with zinc and iron molecules to prepare different derivatives of Mn_0.5Zn_0.5Er_xY_xFe_2-2xO₄ NPs (x = 0.02, 0.04, 0.06, 0.08, 0.10), using an ultrasonication approach. The structure, surface morphology, and chemical compositions of Mn_0.5Zn_0.5Er_xY_xFe_2-2xO₄ NPs were elucidated by X-ray diffractometer (XRD), High-resolution transmission electron microscopy (HR-TEM), scanning electron microscope (SEM), and Energy Dispersive X-Ray Analysis (EDX) techniques. The bioactivity of Mn_0.5Zn_0.5Er_xY_xFe_2-2xO₄ NPs on normal (HEK-293) and (HCT-116) colon cancer cell line was evaluated. The Mn_0.5Zn_0.5Er_xY_xFe_2-2xO₄ NPs treatment post 48 h resulted in a significant reduction in cells (via MTT assay, having an IC₅₀ value between 0.88 µg/mL and 2.40 µg/mL). The specificity of Mn_0.5Zn_0.5Er_xY_xFe_2-2xO₄ NPs were studied by treating them on normal cells line (HEK-293). The results showed that Mn_0.5Zn_0.5Er_xY_xFe_2-2xO₄ NPs did not incur any effect on HEK-293, which suggests that Mn_0.5Zn_0.5Er_xY_xFe_2-2xO₄ NPs selectively targeted the colon cancerous cells. Using Candida albicans, antifungal activity was also studied by evaluating minimum inhibitory/fungicidal concentration (MIC/MFC) and the effect of nanomaterial on the germ tube formation, which exhibited that NPs significantly inhibited the growth and germ tube formation. The obtained results hold the potential to design nanoparticles that lead to efficient bioactivity.

Phytomolecules-Coated NiO Nanoparticles Synthesis Using Abutilon indicum Leaf Extract: Antioxidant, Antibacterial, and Anticancer Activities

BACKGROUND

NiO nanoparticles have attracted much attention due to their unique properties. They have been synthesized using chemical and physical techniques that often need toxic chemicals. These toxic chemicals cannot easily be removed from the nanoparticle's surface, make them less biocompatible, and limit their biological applications. Instead, plants based green synthesis of nanoparticles uses phytomolecules as reducing and capping agents. These phytomolecules are biologically active with no or less toxic effects.

MATERIALS AND METHODS

Phytomolecules-coated NiO nanoparticles were synthesized employing a green route using Abutilon indicum leaf extract. For comparative study, we also have synthesized NiO nanoparticles using the co-precipitation method. Synthesized nanoparticles were successfully characterized using different spectroscopic techniques. The synthesized nanoparticles were evaluated for antibacterial activity with agar well diffusion assay against different bacteria compared to standard drug and plant extract. They are also examined for anticancer potential using MTT assay against HeLa cancer cells, and further, their antioxidant potential was determined using DPPH assay. Biocompatibility of the synthesized nanoparticles was assessed against fibroblast cells.

RESULTS

Phytomolecules-coated NiO nanoparticles were demonstrated superior antibacterial and anticancer performance against bacteria (E. coli, B. bronchiseptica, B. subtilis, and S. aureus) by presenting highest zone of inhibitions (18 ± 0.58 mm, 21 ± 0.45 mm, 22 ± 0.32 mm, and 23 ± 0.77 mm) and HeLa cancer cells by exhibiting the least cell viability percentage (51.74 ± 0.35%) compared to plant extract and chemically synthesized NiO nanoparticles but were comparable to standard antibiotic and anticancer drugs, respectively. Phytomolecules-coated NiO nanoparticles were also demonstrated excellent antioxidant activity (79.87 ± 0.43% DPPH inhibition) and biocompatibility (> 90% cell viability) with fibroblast cells.

CONCLUSION

Nanoparticle synthesis using the Abutilon indicum leaf extract is an efficient and economical method, produces biocompatible and more biologically active nanoparticles, which can be an excellent candidate for therapeutic applications.

Anti-bacterial and wound healing-promoting effects of zinc ferrite nanoparticles

BACKGROUND

Increasing antibiotic resistance continues to focus on research into the discovery of novel antimicrobial agents. Due to its antimicrobial and wound healing-promoting activity, metal nanoparticles have attracted attention for dermatological applications. This study is designed to investigate the scope and bactericidal potential of zinc ferrite nanoparticles (ZnFe₂O₄ NPs), and the mechanism of anti-bacterial action along with cytocompatibility, hemocompatibility, and wound healing properties.

RESULTS

ZnFe₂O₄ NPs were synthesized via a modified co-precipitation method. Structure, size, morphology, and elemental compositions of ZnFe₂O₄ NPs were analyzed using X-ray diffraction pattern, Fourier transform infrared spectroscopy, and field emission scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy. In PrestoBlue and live/dead assays, ZnFe₂O₄ NPs exhibited dose-dependent cytotoxic effects on human dermal fibroblasts. In addition, the hemocompatibility assay revealed that the NPs do not significantly rupture red blood cells up to a dose of 1000 µg/mL. Bacterial live/dead imaging and zone of inhibition analysis demonstrated that ZnFe₂O₄ NPs showed dose-dependent bactericidal activities in various strains of Gram-negative and Gram-positive bacteria. Interestingly, NPs showed antimicrobial activity through multiple mechanisms, such as cell membrane damage, protein leakage, and reactive oxygen species generation, and were more effective against gram-positive bacteria. Furthermore, in vitro scratch assay revealed that ZnFe₂O₄ NPs improved cell migration and proliferation of cells, with noticeable shrinkage of the artificial wound model.

CONCLUSIONS

This study indicated that ZnFe₂O₄ NPs have the potential to be used as a future antimicrobial and wound healing drug.

Development of bactericidal spinel ferrite nanoparticles with effective biocompatibility for potential wound healing applications

The current study was devised to explore the antibacterial activity and underlying mechanism of spinel ferrite nanoparticles (NPs) along with their biocompatibility and wound healing potentials. In this regard, nickel ferrite and zinc/nickel ferrite NPs were synthesized via a modified co-precipitation method and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy Energy-dispersive X-ray spectroscopy (EDX). The biocompatibility of the synthesized NPs with human dermal fibroblast (HDF) and red blood cells (RBCs) was assessed. The biocompatible concentrations of the NPs were used to investigate the antimicrobial activity against various pathogenic Gram-negative and Gram-positive bacteria. The mode of bactericidal action was also explored. In vitro scratch assay was performed to evaluate the wound healing potential of NPs. The SEM-EDX analysis showed that the average particles size of nickel ferrite and zinc/nickel ferrite were 49 and 46 nm, respectively, with appropriate elemental composition and homogenous distribution. The XRD pattern showed all the characteristic diffraction peaks of spinel ferrite NPs, which confirmed the synthesis of the pure phase cubic spinel structure. The biocompatible concentration of nickel ferrite and zinc/nickel ferrite NPs was found to be 250 and 125 μg ml-1, respectively. Both the NPs showed inhibition against all the selected strains in the concentration range of 50 to 1000 μg ml-1. Studies on the underlying antimicrobial mechanism revealed damage to the cell membrane, protein leakage, and intracellular reactive oxygen species production. The in vitro scratch assay confirmed the migration and proliferation of fibroblast with artificial wound shrinkage. This study shows that nickel ferrite and zinc/nickel ferrite NPs could be a strong candidate for antibacterial and wound healing nano-drugs.

Co0 superparamagnetic nanoparticles stabilized by an organic layer coating with antimicrobial activity

Cobalt (Co) is one of the most promising materials in nanotechnology due to its superior magnetic properties. However, due to the high cytotoxicity of cobalt, the activity in biological systems has been little studied. In this work, we report the structural, morphological, and magnetic properties of cobalt nanoparticles stabilized with an organic layer (Co⁰@C-NPs) and its potential antimicrobial activity. The Co⁰@C-NPs were obtained from solvothermal conditions and characterized by X-ray powder diffraction, electronic microscopy, and magnetic measurements. The organic layer was analysed by thermogravimetric analysis, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and Fourier Transform Infrared Spectroscopy. From the TEM image, an organic coating layer is observed around Co⁰ where this coating prevents NPs from oxidation allowing it to remain stable until 400 °C. Surface composition studies by SEM/EDS allowed the identification of carbon, oxygen, and cobalt elements present in the organic layer. This result was corroborated later by FITR analysis. Preliminary antibacterial properties were also investigated, which showed that the cobalt nanoparticles are active against Staphylococcus aureus after 1 h of exposure. The superparamagnetic properties and organic coating Co⁰@C-NPs could be biocompatible with biological systems, but more research is needed to apply these nanoparticles in biomedical products.

The Co⁰@C-NPs were obtained using solvothermal synthesis. The Co⁰@C-NPs were characterized by different techniques and its antimicrobial activity was assessed against Staphylococcus aureus by microdilution assay and scanning electron microscope.

Synthesis of Ni0.5Co0.5-xCdxFe1.78Nd0.02O4 (x ≤ 0.25) nanofibers by using electrospinning technique induce anti-cancer and anti-bacterial activities

Here we report the electrospinning synthesis of Cd-substituted Ni-Co ferrite Ni_0.5Co_0.5-xCd_xFe_1.78Nd_0.02O₄ (x ≤ 0.25) nanofiber (NFs) with a very low concentration of Nd as a dopant. The structure and surface morphology of the Ni_0.5Co_0.5-xCd_xFe_1.78Nd_0.02O₄ (x ≤ 0.25) NFs were analyzed by X-ray powder pattern (XRD), transmission and scanning electron microscopes (TEM) along with Energy-dispersive X-ray (EDX). We have examined the biological applications of the Ni_0.5Co_0.5-xCd_xFe_1.78Nd_0.02O₄ (x ≤ 0.25) NFs on both cancerous cells and bacterial cells. We have found that Ni_0.5Co_0.5-xCd_xFe_1.78Nd_0.02O₄ (x ≤ 0.25) NFs produced inhibitory action on the human colorectal carcinoma cells (HEK-293) and also showed inhibitory action on the bacterial strains (S. aureus and E. coli) respectively. Finally, this is the first report on the synthesis of Cd- substituted Co-Ni ferrite nanofibers using electrospinning technique exhibiting anti-cancer and anti-bacterial activities.Communicated by Ramaswamy H. Sarma.

A Wild Fomes fomentarius for Biomediation of One Pot Synthesis of Titanium Oxide and Silver Nanoparticles for Antibacterial and Anticancer Application

The present study offers an alternative method for green synthesis of the formation of two types of nanoparticles (NPs). These NPs, titanium oxide and silver NPs (TiO₂ and Ag NPs, respectively), were obtained from the amalgamation of intracellular extract of a wild mushroom, Fomes fomentarius, with aqueous solutions of titanium isopropoxide and silver nitrate, respectively. F. fomentarius was identified phenotypically and by 18S ribosomal RNA gene sequencing (Gene accession no: MK635351). The biosynthesis of TiO₂ and Ag NPs was studied and characterized by X-ray diffraction (XRD), diffuse reflectance UV-Visible spectroscopy (DR-UV), fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and transmission electron microscope (TEM). Success was achieved in obtaining NPs of differing sizes and shapes. The antibacterial and anticancer activity of the NPs was significant with morphological damage being caused by both, although Ag NPs (10–20 nm) were found to have profound effects on bacterial and cancer cells in comparison to TiO₂ NPs (100–120 nm). These metal NPs, synthesized using wild mushrooms, hold a great potential in biomedicinedue to an effective enzyme combination, which permits them to modify different chemical compounds to less toxic forms, which is required for ecofriendly and safe biomaterials.