Isoelectric Point Separations of Peptides and Proteins

An integrated in silico approach for the identification of novel potential drug target and chimeric vaccine against Neisseria meningitides strain 331401 serogroup X by subtractive genomics and reverse vaccinology

Neisseria meningitidis, commonly known as the meningococcus, leads to substantial illness and death among children and young adults globally, revealing as either epidemic or sporadic meningitis and/or septicemia. In this study, we have designed a novel peptide-based chimeric vaccine candidate against the N. meningitidis strain 331,401 serogroup X. Through rigorous analysis of subtractive genomics, two essential cytoplasmic proteins, namely UPI000012E8E0(UDP-3-O-acyl-GlcNAc deacetylase) and UPI0000ECF4A9(UDP-N-acetylglucosamine acyltransferase) emerged as potential drug targets. Additionally, using reverse vaccinology, the outer membrane protein UPI0001F4D537 (Membrane fusion protein MtrC) identified by subcellular localization and recognized for its known indispensable role in bacterial survival was identified as a novel chimeric vaccine target. Following a careful comparison of MHC-I, MHC-II, T-cell, and B-cell epitopes, three epitopes derived from UPI0001F4D537 were linked with three types of linkers-GGGS, EAAAK, and the essential PADRE-for vaccine construction. This resulted in eight distinct vaccine models (V1-V8). Among them V1 model was selected as the final vaccine construct. It exhibits exceptional immunogenicity, safety, and enhanced antigenicity, with 97.7 % of its residues in the Ramachandran plot's most favored region. Subsequently, the vaccine structure was docked with the TLR4/MD2 complex and six different HLA allele receptors using the HADDOCK server. The docking resulted in the lowest HADDOCK score of 39.3 ± 9.0 for TLR/MD2. Immune stimulation showed a strong immune response, including antibodies creation and the activation of B-cells, T Cytotoxic cells, T Helper cells, Natural Killer cells, and interleukins. Furthermore, the vaccine construct was successfully expressed in the Escherichia coli system by reverse transcription, optimization, and ligation in the pET-28a (+) vector for the expression study. The current study proposes V1 construct has the potential to elicit both cellular and humoral responses, crucial for the developing an epitope-based vaccine against N. meningitidis strain 331,401 serogroup X.

Characterizing the West Nile Virus's polyprotein from nucleotide sequence to protein structure - Computational tools

Objectives

West Nile virus (WNV) belongs to the Flaviviridae family and causes West Nile fever. The mechanism of transmission involves the culex mosquito species. Infected individuals are primarily asymptomatic, and few exhibit common symptoms. Moreover, 10 % of neuronal infection caused by this virus cause death. The proteins encoded by these genes had been uncharacterized, although understanding their function and structure is important for formulating antiviral drugs.

Methods

Herein, we used in silico approaches, including various bioinformatic tools and databases, to analyse the proteins from the WNV polyprotein individually. The characterization included GC content, physicochemical properties, conserved domains, soluble and transmembrane regions, signal localization, protein disorder, and secondary structure features and their respective 3D protein structures.

Results

Among 11 proteins, eight had >50 % GC content, eight proteins had basic pI values, three proteins were unstable under in vitro conditions, four were thermostable according to >100 AI values and some had negative GRAVY values in physicochemical analyses. All protein-conserved domains were shared among Flaviviridae family members. Five proteins were soluble and lacked transmembrane regions. Two proteins had signals for localization in the host endoplasmic reticulum. Non-structural (NS) 2A showed low protein disorder. The secondary structural features and tertiary structure models provide a valuable biochemical resource for designing selective substrates and synthetic inhibitors.

Conclusions

WNV proteins NS2A, NS2B, PM, NS3 and NS5 can be used as drug targets for the pharmacological design of lead antiviral compounds.

Isoelectric trapping and discrimination of histones from plasma in a microfluidic device using dehydrated isoelectric gate

Histones are basic proteins with an isoelectric point around 11. It has been shown that the level of plasma circulating histones increases significantly during sepsis, and circulating free histones are associated with sepsis severity and mortality. It was found that the median plasma total free histone concentration of sepsis ICU non-survivors is higher compared to survivors. Therefore, histone concentration can serve as a prognostic indicator and there is a need for a simple, low-cost, and rapid method for measuring histone levels. In this work, we have developed a microfluidic device containing an isoelectric membrane made of dehydrated agarose gel of a specific pH embedded in a porous membrane for isoelectric trapping of histones rapidly. Although isoelectric gates have been used for trapping proteins before, they have to be introduced at the time of the experiment. Here, we show that isoelectric gates formed by gels loaded in a scaffold can be integrated directly into the fabrication process flow, dehydrated for storage, and rehydrated during the experiment and still function effectively to achieve isoelectric trapping. A low-cost and rapid microfabrication technique, xurography, was used for agarose integration and device fabrication. The integrated device was tested with samples containing buffered histone, histone in the presence of high-concentration bovine serum albumin (BSA), and histone spiked in blood plasma. The results show that the device can be used to distinguish between survivors and non-survivors of sepsis in less than 10 min, making it suitable as a point-of-care device for sepsis prognosis.

Recent developments in capillary and microchip electroseparations of peptides (2021-mid-2023)

This review article brings a comprehensive survey of developments and applications of high-performance capillary and microchip electromigration methods (zone electrophoresis in a free solution or in sieving media, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, micropreparation, and physicochemical characterization of peptides in the period from 2021 up to ca. the middle of 2023. Progress in the study of electromigration properties of peptides and various aspects of their analysis, such as sample preparation, adsorption suppression, electroosmotic flow regulation, and detection, are presented. New developments in the particular capillary electromigration methods are demonstrated, and several types of their applications are reported. They cover qualitative and quantitative analysis of synthetic or isolated peptides and determination of peptides in complex biomatrices, peptide profiling of biofluids and tissues, and monitoring of chemical and enzymatic reactions and physicochemical changes of peptides. They include also amino acid and sequence analysis of peptides, peptide mapping of proteins, separation of stereoisomers of peptides, and their chiral analyses. In addition, micropreparative separations and physicochemical characterization of peptides and their interactions with other (bio)molecules by the above CE methods are described.

Mobile Point-of-Care Device Using Molecularly Imprinted Polymer-Based Chemosensors Targeting Interleukin-1β Biomarker

Molecularly imprinted polymers (MIPs) have garnered significant attention as a promising material for engineering specific biological receptors with superior chemical complementarity to target molecules. In this study, we present an electrochemical biosensing platform incorporating MIP films for the selective detection of the interleukin-1β (IL-1β) biomarker, particularly suitable for mobile point-of-care testing (POCT) applications. The IL-1β-imprinted biosensors were composed of poly(eriochrome black T (EBT)), including an interlayer of poly(3,4-ethylene dioxythiophene) and a 4-aminothiophenol monolayer, which were electrochemically polymerized simultaneously with template proteins (i.e., IL-1β) on custom flexible screen-printed carbon electrodes (SPCEs). The architecture of the MIP films was designed to enhance the sensor sensitivity and signal stability. This approach involved a straightforward sequential-electropolymerization process and extraction for leaving behind cavities (i.e., rebinding sites), resulting in the efficient production of MIP-based biosensors capable of molecular recognition for selective IL-1β detection. The electrochemical behaviors were comprehensively investigated using cyclic voltammograms and electrochemical impedance spectroscopy responses to assess the imprinting effect on the MIP films formed on the SPCEs. In line with the current trend in in vitro diagnostic medical devices, our simple and effective MIP-based analytical system integrated with mobile POCT devices offers a promising route to the rapid detection of biomarkers, with particular potential for periodontitis screening.

Expression, purification, and characterization of self-assembly virus-like particles of capsid protein L1 HPV 52 in Pichia pastoris GS115

BACKGROUND

Cervical cancer caused by the human papillomavirus (HPV) is one of the most frequent malignances globally. HPV 52 is a high-risk cancer-causing genotype that has been identified as the most prevalent type in Indonesia. Virus-like particles (VLP)-based vaccinations against HPV infection could benefit from self-assembled VLP of L1 capsid protein.

RESULT

The recombinant HPV 52 L1 was expressed in Pichia pastoris on a shake-flask scale with 0.5% methanol induction in this study. The copy number was used to compare the expression level and stability. The colony that survived on a solid medium containing 2000 μg/ml of Zeocin was selected and cultured to express HPV 52 L1. DNA was extracted from the chosen colony, and the copy was determined using qPCR. HPV 52 L1 protein was then purified through fast performance liquid chromatography. Transmission electron microscopy (TEM) evaluation confirmed the VLP self-assembly. The genomic DNA remained intact after 100 generations of serial cultivation under no selective pressure medium conditions, and the protein produced was relatively stable. However, the band intensity was slightly lower than in the parental colony. In terms of copy number, a low copy transformant resulted in low expression but produced a highly stable recombinant clone. Eventually, the L1 protein expressed in Pichia pastoris can self-assemble into VLP. Therefore, recombinant HPV possesses a stable clone and the ability to self-assemble into VLP.

CONCLUSION

The recombinant L1 HPV 52 protein is successfully expressed in P. pastoris within a size range of approximately 55 kDa and demonstrated favorable stability. The L1 protein expressed in Pichia pastoris successful self-assembled of HPV VLPs, thereby establishing their potential efficacy as a prophylactic vaccine.

Peptide mapping of proteins by capillary electromigration methods

This review article provides a wide overview of important developments and applications of capillary electromigration methods in the area of peptide mapping of proteins in the period 1997-mid-2022, including review articles on this topic. It deals with all major aspects of peptide mapping by capillary electromigration methods: i) precleavage sample preparation involving purification, preconcentration, denaturation, reduction and alkylation of protein(s) to be analyzed, ii) generation of peptide fragments by off-line or on-line enzymatic and/or chemical cleavage of protein(s), iii) postcleavage preparation of the generated peptide mixture for capillary electromigration separation, iv) separation of the complex peptide mixtures by one-, two- and multidimensional capillary electromigration methods coupled with mass spectrometry detection, and v) a large application of peptide mapping for variable purposes, such as qualitative analysis of monoclonal antibodies and other protein biopharmaceuticals, monitoring of posttranslational modifications, determination of primary structure and investigation of function of proteins in biochemical and clinical research, characterization of proteins of variable origin as well as for protein and peptide identification in proteomic and peptidomic studies.

Evaluation of the consistence between the results of immunoinformatics predictions and real-world animal experiments of a new tuberculosis vaccine MP3RT

BACKGROUND

Our previous study developed a novel peptide-based vaccine, MP3RT, to fight against tuberculosis (TB) infection in a mouse model. However, the consistency between the immunoinformatics predictions and the results of real-world animal experiments on the MP3RT vaccine remains unclear.

METHOD

In this study, we predicted the antigenicity, immunogenicity, physicochemical parameters, secondary structure, and tertiary structure of MP3RT using bioinformatics technologies. The immune response properties of the MP3RT vaccine were then predicted using the C-ImmSim server. Finally, humanized mice were used to verify the characteristics of the humoral and cellular immune responses induced by the MP3RT vaccine.

RESULTS

MP3RT is a non-toxic and non-allergenic vaccine with an antigenicity index of 0.88 and an immunogenicity index of 0.61, respectively. Our results showed that the MP3RT vaccine contained 53.36% α-helix in the secondary structure, and the favored region accounted for 98.22% in the optimized tertiary structure. The binding affinities of the MP3RT vaccine to the human leukocyte antigen (HLA)-DRB1*01:01 allele, toll-like receptor-2 (TLR-2), and TLR-4 receptors were -1234.1 kcal/mol, -1066.4 kcal/mol, and -1250.4 kcal/mol, respectively. The results of the C-ImmSim server showed that the MP3RT vaccine could stimulate T and B cells to produce immune responses, such as high levels of IgM and IgG antibodies, IFN-γ, TNF-α, and IL-2 cytokines. Results from real-world animal experiments showed that the MP3RT vaccine could stimulate the humanized mice to produce high levels of IgG and IgG2a antibodies and IFN-γ⁺ T lymphocytes. Furthermore, the levels of IFN-γ, IL-2, and IL-6 cytokines in mice immunized with the MP3RT vaccine were significantly higher than those in the control group.

CONCLUSION

MP3RT is a highly antigenic and immunogenic potential vaccine that can effectively induce Th1-type immune responses in silico analysis and animal experiments. This study lays the foundation for evaluating the value of computational tools and immunoinformatic techniques in reverse vaccinology research.

Traumatic Brain Injury Biomarkers, Simulations and Kinetics

This paper reviews the predictive capabilities of blood-based biomarkers to quantify traumatic brain injury (TBI). Biomarkers for concussive conditions also known as mild, to moderate and severe TBI identified along with post-traumatic stress disorder (PTSD) and chronic traumatic encephalopathy (CTE) that occur due to repeated blows to the head during one's lifetime. Since the pathways of these biomarkers into the blood are not fully understood whether there is disruption in the blood-brain barrier (BBB) and the time it takes after injury for the expression of the biomarkers to be able to predict the injury effectively, there is a need to understand the protein biomarker structure and other physical properties. The injury events in terms of brain and mechanics are a result of external force with or without the shrapnel, in the wake of a wave result in local tissue damage. Thus, these mechanisms express specific biomarkers kinetics of which reaches half-life within a few hours after injury to few days. Therefore, there is a need to determine the concentration levels that follow injury. Even though current diagnostics linking biomarkers with TBI severity are not fully developed, there is a need to quantify protein structures and their viability after injury. This research was conducted to fully understand the structures of 12 biomarkers by performing molecular dynamics simulations involving atomic movement and energies of forming hydrogen bonds. Molecular dynamics software, NAMD and VMD were used to determine and compare the approximate thermodynamic stabilities of the biomarkers and their bonding energies. Five biomarkers used clinically were S100B, GFAP, UCHL1, NF-L and tau, the kinetics obtained from literature show that the concentration values abruptly change with time after injury. For a given protein length, associated number of hydrogen bonds and bond energy describe a lower bound region where proteins self-dissolve and do not have long enough half-life to be detected in the fluids. However, above this lower bound, involving higher number of bonds and energy, we hypothesize that biomarkers will be viable to disrupt the BBB and stay longer to be modeled for kinetics for diagnosis and therefore may help in the discoveries of new biomarkers.

Collagen Alignment via Electro-Compaction for Biofabrication Applications: A Review

As the most prevalent structural protein in the extracellular matrix, collagen has been extensively investigated for biofabrication-based applications. However, its utilisation has been impeded due to a lack of sufficient mechanical toughness and the inability of the scaffold to mimic complex natural tissues. The anisotropic alignment of collagen fibres has been proven to be an effective method to enhance its overall mechanical properties and produce biomimetic scaffolds. This review introduces the complicated scenario of collagen structure, fibril arrangement, type, function, and in addition, distribution within the body for the enhancement of collagen-based scaffolds. We describe and compare existing approaches for the alignment of collagen with a sharper focus on electro-compaction. Additionally, various effective processes to further enhance electro-compacted collagen, such as crosslinking, the addition of filler materials, and post-alignment fabrication techniques, are discussed. Finally, current challenges and future directions for the electro-compaction of collagen are presented, providing guidance for the further development of collagenous scaffolds for bioengineering and nanotechnology.

Protein Design: From the Aspect of Water Solubility and Stability

Water solubility and structural stability are key merits for proteins defined by the primary sequence and 3D-conformation. Their manipulation represents important aspects of the protein design field that relies on the accurate placement of amino acids and molecular interactions, guided by underlying physiochemical principles. Emulated designer proteins with well-defined properties both fuel the knowledge-base for more precise computational design models and are used in various biomedical and nanotechnological applications. The continuous developments in protein science, increasing computing power, new algorithms, and characterization techniques provide sophisticated toolkits for solubility design beyond guess work. In this review, we summarize recent advances in the protein design field with respect to water solubility and structural stability. After introducing fundamental design rules, we discuss the transmembrane protein solubilization and de novo transmembrane protein design. Traditional strategies to enhance protein solubility and structural stability are introduced. The designs of stable protein complexes and high-order assemblies are covered. Computational methodologies behind these endeavors, including structure prediction programs, machine learning algorithms, and specialty software dedicated to the evaluation of protein solubility and aggregation, are discussed. The findings and opportunities for Cryo-EM are presented. This review provides an overview of significant progress and prospects in accurate protein design for solubility and stability.

Optofluidic Particle Manipulation: Optical Trapping in a Thin-Membrane Microchannel

We demonstrate an optofluidic device which utilizes the optical scattering and gradient forces for particle trapping in microchannels featuring 300 nm thick membranes. On-chip waveguides are used to direct light into microfluidic trapping channels. Radiation pressure is used to push particles into a protrusion cavity, isolating the particles from liquid flow. Two different designs are presented: the first exclusively uses the optical scattering force for particle manipulation, and the second uses both scattering and gradient forces. Trapping performance is modeled for both cases. The first design, referred to as the orthogonal force design, is shown to have a 80% capture efficiency under typical operating conditions. The second design, referred to as the gradient force design, is shown to have 98% efficiency under the same conditions.

Lab-scale Preparation of Recombinant Human Insulin-like Growth Factor-1 in Escherichia coli and its Potential Safety on Normal Human Lung Cell Line

BACKGROUND

Insulin-like growth factor-1 (IGF-1) is structurally similar to insulin and acts as an endocrine hormone secreted by the liver.

OBJECTIVE

Production of recombinant human IGF-1 (rhIGF-1) in Escherichia coli (E.coli) and evaluation of its proliferation stimulatory activity.

METHODS

hIGF-1 gene cloned into pBSK (+) simple vector was transformed into TOP 10 chemically competent cells of E. coli. Polymerase chain reaction (PCR) was achieved using specific hIGF-1 gene primers to confirm the successful transformation. To express the rhIGF-1 in E. coli (Rosetta (DE3) pLysS); the hIGF-1 gene was cloned into the pET-15b expression vector and then the recombinant pET-15b/IGF-1 vector was transformed into a chemically prepared competent expression bacterial cells; Rosetta (DE3) pLysS. The rhIGF-1 was expressed as insoluble aggregates called inclusion bodies (IBs) using a 2 mM Isopropyl β-D-1-thiogalactopyranoside (IPTG) inducer. IBs were solubilized in a denatured form using 6 M guanidinium hydrochloride (GdmCl), followed by in vitro protein refolding using the rapid dilution method. The refolded hIGF-1 was purified using the HiTrap- ANX anion exchange column. Western blot and ELISA using rabbit polyvalent anti-hIGF- 1 were performed to confirm the protein antigenic identity. Cell proliferation activity of rhIGF-1 was testified on normal human lung cell line (WI-38).

RESULTS

rhIGF-1 was purified from the HiTrap-ANX column at a concentration of 300 μg/ml. Western blot showed a single 7.6 kDa band obtained in the induced Rosetta (DE3) pLYsS. ELISA confirmed the molecular identity of the rhIGF-1 epitope, the concentration of purified rhIGF-1 obtained from the ELISA standard curve using rhIGF-1 reference protein as a standard was 300 μg/ml, and activity on WI-38 cells was 2604.17I U/mg.

CONCLUSION

Biologically active native rhIGF-1 protein was successfully expressed. Patents related to the preparation of IGF-1 were mentioned along the text.

In silico design of a multi-epitope vaccine against HPV16/18

BACKGROUND

Cervical cancer is the fourth most common cancer affecting women and is caused by human Papillomavirus (HPV) infections that are sexually transmitted. There are currently commercially available prophylactic vaccines that have been shown to protect vaccinated individuals against HPV infections, however, these vaccines have no therapeutic effects for those who are previously infected with the virus. The current study's aim was to use immunoinformatics to develop a multi-epitope vaccine with therapeutic potential against cervical cancer.

RESULTS

In this study, T-cell epitopes from E5 and E7 proteins of HPV16/18 were predicted. These epitopes were evaluated and chosen based on their antigenicity, allergenicity, toxicity, and induction of IFN-γ production (only in helper T lymphocytes). Then, the selected epitopes were sequentially linked by appropriate linkers. In addition, a C-terminal fragment of Mycobacterium tuberculosis heat shock protein 70 (HSP70) was used as an adjuvant for the vaccine construct. The physicochemical parameters of the vaccine construct were acceptable. Furthermore, the vaccine was soluble, highly antigenic, and non-allergenic. The vaccine's 3D model was predicted, and the structural improvement after refinement was confirmed using the Ramachandran plot and ProSA-web. The vaccine's B-cell epitopes were predicted. Molecular docking analysis showed that the vaccine's refined 3D model had a strong interaction with the Toll-like receptor 4. The structural stability of the vaccine construct was confirmed by molecular dynamics simulation. Codon adaptation was performed in order to achieve efficient vaccine expression in Escherichia coli strain K12 (E. coli). Subsequently, in silico cloning of the multi-epitope vaccine was conducted into pET-28a ( +) expression vector.

CONCLUSIONS

According to the results of bioinformatics analyses, the multi-epitope vaccine is structurally stable, as well as a non-allergic and non-toxic antigen. However, in vitro and in vivo studies are needed to validate the vaccine's efficacy and safety. If satisfactory results are obtained from in vitro and in vivo studies, the vaccine designed in this study may be effective as a therapeutic vaccine against cervical cancer.

Experimental application of a zero-point charge based on pH as a simple indicator of microplastic particle aggregation

Micro/nanoplastics - a useful but threatening material - continuously require fundamental research on its behaviors and properties for aggregation. Zeta potential (ζ) has been using as an indicator to determine the optimal aggregation for particle removal in water treatment processes. In the field work, however, an alternative method for streamlining these tasks and reducing the variability in processing efficiency is necessary. To improve practical utility in the field work, this study aimed at investigating applicability of the zero-point charge (ZPC) of the isoelectric point (IEP; ψ_pI) as an alternative indicator for aggregation in place of ζ. For the purpose, this study conducted laboratory experiments and model simulations. The experiments measured ψ_pI of microplastics in a trivalent-electrolyte aqueous solution using various concentrations of polyaluminum chloride (PAC) for reproducing the behavior of microplastics in natural water environments. As a result, ψ_pI for polyethylene (PE) and polyvinylchloride (PVC) were found to be pH 6.59 and 6.43, respectively. The removal rates (r) depended on the aggregation at the initial pH and optimal PAC concentration. The experimental attachment efficiency (α_E), 0.14 to 0.4, showed a good correlation of over 95% with r, 0.04 to 0.84, both based on the pH change and PAC concentration and differing slightly with the type and size of the plastic. The highest α_E was achieved with the highest r when ψ_pI was close to zero in the pH range of 6-8 using the optimized PAC concentration. Based on the experimental results, the model confirmed the applicability of ψ_pI instead of ζ as an indicator of the aggregation by simulating α_E based on ψ_pI and ionic strength, which are themselves based on the change in pH. Therefore, this study provides some insights into behaviors of microplastics by using the isoelectric point (IEP, ψpI) as an indicator of aggregation of microplastics in place of ζ. The IEP method is limited by initial pH, optimal dosage of coagulant, and type and size of microplastics, but it will increase practical utility in the field.

Protein by-products: Composition, extraction, and biomedical applications

Significant upsurge in animal by-products such as skin, bones, wool, hides, feathers, and fats has become a global challenge and, if not properly disposed of, can spread contamination and viral diseases. Animal by-products are rich in proteins, which can be used as nutritional, pharmacologically functional ingredients, and biomedical materials. Therefore, recycling these abundant and renewable by-products and extracting high value-added components from them is a sustainable approach to reclaim animal by-products while addressing scarce landfill resources. This article appraises the most recent studies conducted in the last five years on animal-derived proteins' separation and biomedical application. The effort encompasses an introduction about the composition, an overview of the extraction and purification methods, and the broad range of biomedical applications of these ensuing proteins.

Altered SOD1 maturation and post-translational modification in amyotrophic lateral sclerosis spinal cord

Aberrant self-assembly and toxicity of wild-type and mutant superoxide dismutase 1 (SOD1) has been widely examined in silico, in vitro, and in transgenic animal models of amyotrophic lateral sclerosis (ALS). Detailed examination of the protein in disease-affected tissues from ALS patients, however, remains scarce. We employed histological, biochemical and analytical techniques to profile alterations to SOD1 protein deposition, subcellular localization, maturation and post-translational modification in post-mortem spinal cord tissues from ALS cases and controls. Tissues were dissected into ventral and dorsal spinal cord grey matter to assess the specificity of alterations within regions of motor neuron degeneration. We provide evidence of the mislocalization and accumulation of structurally-disordered, immature SOD1 protein conformers in spinal cord motor neurons of SOD1-linked and non-SOD1-linked familial ALS cases, and sporadic ALS cases, compared with control motor neurons. These changes were collectively associated with instability and mismetallation of enzymatically-active SOD1 dimers, as well as alterations to SOD1 post-translational modifications and molecular chaperones governing SOD1 maturation. Atypical changes to SOD1 protein were largely restricted to regions of neurodegeneration in ALS cases, and clearly differentiated all forms of ALS from controls. Substantial heterogeneity in the presence of these changes was also observed between ALS cases. Our data demonstrates that varying forms of SOD1 proteinopathy are a common feature of all forms of ALS, and support the presence of one or more convergent biochemical pathways leading to SOD1 proteinopathy in ALS. The majority of these alterations are specific to regions of neurodegeneration, and may therefore constitute valid targets for therapeutic development.

Recent Advances of Point-of-Care Devices Integrated with Molecularly Imprinted Polymers-Based Biosensors: From Biomolecule Sensing Design to Intraoral Fluid Testing

Recent developments of point-of-care testing (POCT) and in vitro diagnostic medical devices have provided analytical capabilities and reliable diagnostic results for rapid access at or near the patient's location. Nevertheless, the challenges of reliable diagnosis still remain an important factor in actual clinical trials before on-site medical treatment and making clinical decisions. New classes of POCT devices depict precise diagnostic technologies that can detect biomarkers in biofluids such as sweat, tears, saliva or urine. The introduction of a novel molecularly imprinted polymer (MIP) system as an artificial bioreceptor for the POCT devices could be one of the emerging candidates to improve the analytical performance along with physicochemical stability when used in harsh environments. Here, we review the potential availability of MIP-based biorecognition systems as custom artificial receptors with high selectivity and chemical affinity for specific molecules. Further developments to the progress of advanced MIP technology for biomolecule recognition are introduced. Finally, to improve the POCT-based diagnostic system, we summarized the perspectives for high expandability to MIP-based periodontal diagnosis and the future directions of MIP-based biosensors as a wearable format.

Characterization of AMA1-RON2L complex with native gel electrophoresis and capillary isoelectric focusing

Rhoptry neck protein 2 (RON2) binds to the hydrophobic groove of apical membrane antigen 1 (AMA1), an interaction essential for invasion of red blood cells (RBCs) by Plasmodium falciparum (Pf) parasites. Vaccination with AMA1 alone has been shown to be immunogenic, but unprotective even against homologous challenge in human trials. However, the AMA1-RON2L (L is referred to as the loop region of RON2 peptide) complex is a promising candidate, as preclinical studies with Freund's adjuvant have indicated complete protection against lethal challenge in mice and superior protection against virulent infection in Aotus monkeys. To prepare for clinical trials of the AMA1-RON2L complex, identity and integrity of the candidate vaccine must be assessed, and characterization methods must be carefully designed to not dissociate the delicate complex during evaluation. In this study, we developed a native Tris-glycine gel method to separate and identify the AMA1-RON2L complex, which was further identified and confirmed by Western blotting using anti-AMA1 monoclonal antibodies (mAbs 4G2 and 2C2) and anti-RON2L polyclonal Ab coupled with mass spectrometry. The formation of complex was also confirmed by Capillary Isoelectric Focusing (cIEF). A short-term (48 h and 72 h at 4°C) stability study of AMA1-RON2L complex was also performed. The results indicate that the complex was stable for 72 h at 4°C. Our research demonstrates that the native Tris-glycine gel separation/Western blotting coupled with mass spectrometry and cIEF can fully characterize the identity and integrity of the AMA1-RON2L complex and provide useful quality control data for the subsequent clinical trials.

Label-Free Physical Techniques and Methodologies for Proteins Detection in Microfluidic Biosensor Structures

Proteins in biological fluids (blood, urine, cerebrospinal fluid) are important biomarkers of various pathological conditions. Protein biomarkers detection and quantification have been proven to be an indispensable diagnostic tool in clinical practice. There is a growing tendency towards using portable diagnostic biosensor devices for point-of-care (POC) analysis based on microfluidic technology as an alternative to conventional laboratory protein assays. In contrast to universally accepted analytical methods involving protein labeling, label-free approaches often allow the development of biosensors with minimal requirements for sample preparation by omitting expensive labelling reagents. The aim of the present work is to review the variety of physical label-free techniques of protein detection and characterization which are suitable for application in micro-fluidic structures and analyze the technological and material aspects of label-free biosensors that implement these methods. The most widely used optical and impedance spectroscopy techniques: absorption, fluorescence, surface plasmon resonance, Raman scattering, and interferometry, as well as new trends in photonics are reviewed. The challenges of materials selection, surfaces tailoring in microfluidic structures, and enhancement of the sensitivity and miniaturization of biosensor systems are discussed. The review provides an overview for current advances and future trends in microfluidics integrated technologies for label-free protein biomarkers detection and discusses existing challenges and a way towards novel solutions.

Computational identification of Plasmodium falciparum RNA pseudouridylate synthase as a viable drug target, its physicochemical properties, 3D structure prediction and prediction of potential inhibitors

The increased resistance to the currently effective antimalarial drugs against Plasmodium falciparum has necessitated the development of new drugs for malaria treatment. Many proteins have been predicted using various means as potential drug targets for the treatment of the P. falciparum malaria infection. Meanwhile, only a few studies went on to predict the 3-dimensional (3D) structure of potential target. Therefore, this study aimed to predict potential antimalarial drug targets against the deadliest malaria parasite P. falciparum as well as to determine the 3D structure and possible inhibitors of one of the targets. We employed machine learning approach to predict suitable drug targets in P. falciparum. Five of the predicted protein targets were considered as potential drug targets as they were non-homologous to their human counterparts. Out of these, we determined the physicochemical properties, predicted the 3D structure and carried out docking-based virtual screening of P. falciparum RNA pseudouridylate synthase, putative (PfRPuSP). The PfRPuSP was one of the potential five target proteins. Homology modelling and the ab initio methods were used to predict the 3D structure of PfRPuSP. Then, a compound library of 5621 molecules was constructed from PubChem and ChEMBL databases using 5-fluorouridine as the control inhibitor. Docking-based virtual screening was performed using Autodock 4.2 and Autodock Vina to select compounds with high binding affinity. A total of 11 compounds were selected based on their binding energies from 881 compounds which were manually examined after docking. Seven of the 11 compounds that exhibited remarkable interactions with the residues in the active sites of PfRPuSP were analysed. These compounds performed favourably when compared to the control inhibitor and predicted to bind better than 5-fluorouridine. These seven compounds are suggested as new potential lead structures for antimalarial treatment.

Recent developments in capillary and microchip electroseparations of peptides (2019-mid 2021)

The review provides a comprehensive overview of developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, microscale isolation, and physicochemical characterization of peptides from 2019 up to approximately the middle of 2021. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis, such as sample preparation, sorption suppression, EOF control, and detection, are presented. New developments in the individual CE and CEC methods are demonstrated and several types of their applications are shown. They include qualitative and quantitative analysis, determination in complex biomatrices, monitoring of chemical and enzymatic reactions and physicochemical changes, amino acid, sequence, and chiral analyses, and peptide mapping of proteins. In addition, micropreparative separations and determination of significant physicochemical parameters of peptides by CE and CEC methods are described.

Proteomes Are of Proteoforms: Embracing the Complexity

Proteomes are complex-much more so than genomes or transcriptomes. Thus, simplifying their analysis does not simplify the issue. Proteomes are of proteoforms, not canonical proteins. While having a catalogue of amino acid sequences provides invaluable information, this is the Proteome-lite. To dissect biological mechanisms and identify critical biomarkers/drug targets, we must assess the myriad of proteoforms that arise at any point before, after, and between translation and transcription (e.g., isoforms, splice variants, and post-translational modifications [PTM]), as well as newly defined species. There are numerous analytical methods currently used to address proteome depth and here we critically evaluate these in terms of the current 'state-of-the-field'. We thus discuss both pros and cons of available approaches and where improvements or refinements are needed to quantitatively characterize proteomes. To enable a next-generation approach, we suggest that advances lie in transdisciplinarity via integration of current proteomic methods to yield a unified discipline that capitalizes on the strongest qualities of each. Such a necessary (if not revolutionary) shift cannot be accomplished by a continued primary focus on proteo-genomics/-transcriptomics. We must embrace the complexity. Yes, these are the hard questions, and this will not be easy…but where is the fun in easy?

Recombinant Expression of Cec-B Peptide in Escherichia coli with a Significant Anticancer Effect on Hepatocellular Carcinoma

BACKGROUND

Cecropin-B (Cec-B) is an Antimicrobial Peptide (AMP) found in insects.

OBJECTIVES

Recombinant production of Cec-B peptide in Escherichia coli (Rosetta™ DE3), and studying its anticancer effect on Hepatocellular Carcinoma Cell line (HCC).

METHODS

The Cec-B gene of Drosophila melanogaster was synthesized by PCR assembly using the Simplified Gene Synthesis (SGS) method. To express the recombinant peptide in E. coli (Rosetta™ DE3); the synthesized gene was cloned into pET-15b expression vector. The recombinant peptide was expressed as insoluble aggregates called Inclusion Bodies (IBs) using 2mM lactose inducer. IBs were solubilized in a denatured form using 8 M urea followed by in-vitro protein refolding using rapid dilution method. The refolded Cec-B was purified using cation-exchange SP-FF column. Cytotoxicity of recombinant Cec-B (rCec-B) was reported on normal human lung cell line (WI-38), and Hepatocellular carcinoma cell line (HepG2).

RESULTS

The Cec-B gene was expressed and purified at concentration 1.212±0.1 mg/ml which represents 48.49±4% of the total proteins injected to the column (2.5±0.2 mg/ml). The safe dose of purified rCec-B on normal WI-38 cells was calculated to be 1.57 mg/ml. The half-maximal Inhibitory Concentration (IC50) of rCec-B on HepG2 cell line was calculated to be 25 μg/ml. Scanning Electron Microscope (SEM) showed that untreated and treated HepG2 cells had cell diameters from 11-12.92 μm and 14.18-21.58 μm, respectively.

CONCLUSION

The results of this study revealed a successful expression of the rCec-B peptide using a pET-based expression system with a simple purification step. The purified peptide could be considered as a hopeful anticancer drug against HCC.

Native Separation and Metallation Analysis of SOD1 Protein from the Human Central Nervous System: a Methodological Workflow

Studies of the metal content of metalloproteins in tissues from the human central nervous system (CNS) can be compromised by preparative techniques which alter levels of, or interactions between, metals and the protein of interest within a complex mixture. We developed a methodological workflow combining size exclusion chromatography, native isoelectric focusing, and either proton or synchrotron X-ray fluorescence within electrophoresis gels to analyze the endogenous metal content of copper-zinc superoxide dismutase (SOD1) purified from minimal amounts (<20 mg) of post-mortem human brain and spinal cord tissue. Abnormal metallation and aggregation of SOD1 are suspected to play a role in amyotrophic lateral sclerosis and Parkinson's disease, but data describing SOD1 metal occupancy in human tissues have not previously been reported. Validating our novel approach, we demonstrated step-by-step metal preservation, preserved SOD1 activity, and substantial enrichment of SOD1 protein versus confounding metalloproteins. We analyzed tissues from nine healthy individuals and five CNS regions (occipital cortex, substantia nigra, locus coeruleus, dorsal spinal cord, and ventral spinal cord). We found that Cu and Zn were bound to SOD1 in a ratio of 1.12 ± 0.28, a ratio very close to the expected value of 1. Our methodological workflow can be applied to the study of endogenous native SOD1 in a pathological context and adapted to a range of metalloproteins from human tissues and other sources.

Fractionated charge variants of biosimilars: A review of separation methods, structural and functional analysis

The similarity between originator and biosimilar monoclonal antibody candidates are rigorously assessed based on primary, secondary, tertiary, quaternary structures, and biological functions. Minor differences in such parameters may alter target-binding, potency, efficacy, or half-life of the molecule. The charge heterogeneity analysis is a prerequisite for all biotherapeutics. Monoclonal antibodies are prone to enzymatic or non-enzymatic structural modifications during or after the production processes, leading to the formation of fragments or aggregates, various glycoforms, oxidized, deamidated, and other degraded residues, reduced Fab region binding activity or altered FcR binding activity. Therefore, the charge variant profiles of the monoclonal antibodies must be regularly and thoroughly evaluated. Comparative structural and functional analysis of physically separated or fractioned charged variants of monoclonal antibodies has gained significant attention in the last few years. The fraction-based charge variant analysis has proved very useful for the biosimilar candidates comprising of unexpected charge isoforms. In this report, the key methods for the physical separation of monoclonal antibody charge variants, structural and functional analyses by liquid chromatography-mass spectrometry, and surface plasmon resonance techniques were reviewed.

Design of a multi-epitope vaccine against SARS-CoV-2 using immunoinformatics approach

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) caused COVID-19 disease in China. So far, no vaccine has licensed to protect against infection with COVID-19, therefore an effective COVID-19 vaccine needed. The aim of this study was to predict antigenic peptides of SARS-CoV-2 for designing the COVID-19 vaccine using immunoinformatic analysis. In this study, T and B-cell epitopes of S protein were predicted and screened based on the antigenicity, toxicity, allergenicity, and cross-reactivity with human proteomes. The epitopes were joined by the appropriate linker. LT-IIc as an adjuvant was attached to the end of the structure. The secondary and 3D structure of the vaccine was predicted. The refinement process was performed to improve the quality of the 3D model structure; the validation process is performed using the Ramachandran plot and ProSA z-score. The proposed vaccine's binding affinity to the HLA-A11:01 and HLA-DRB1_01:01 molecule was evaluated by molecular docking. Using molecular dynamics, the stability of vaccine-HLA complexes was also evaluated. Finally, in silico gene cloning was performed in the pET30a (+) vector. The findings suggest that the current vaccine may be a promising vaccine to prevent SARS-CoV-2 infection.

Separation of Bioactive Small Molecules, Peptides from Natural Sources and Proteins from Microbes by Preparative Isoelectric Focusing (IEF) Method

Natural products derived from plants and microbes are a rich source of bioactive molecules. Prior to their use, the active molecules from complex extracts must be purified for downstream applications. There are various chromatographic methods available for this purpose yet not all labs can afford high performance methods and isolation from complex biological samples can be difficult. Here we demonstrate that preparative liquid-phase isoelectric focusing (IEF) can separate molecules, including small molecules and peptides from complex plant extracts, based on their isoelectric points (pI). We have used the method for complex biological sample fractionation and characterization. As a proof of concept, we fractionated a Gymnema sylvestre plant extract, isolating a family of terpenoid saponin small molecules and a peptide. We also demonstrated effective microbial protein separation using the Candida albicans fungus as a model system.

Comparative label-free mass spectrometric analysis of temporal changes in the skeletal muscle proteome after impact trauma in rats

Proteomics offers the opportunity to identify and quantify many proteins and to explore how they correlate and interact with each other in biological networks. This study aimed to characterize changes in the muscle proteome during the destruction, repair, and early-remodeling phases after impact trauma in male Wistar rats. Muscle tissue was collected from uninjured control rats and rats that were euthanized between 6 h and 14 days after impact injury. Muscle tissue was analyzed using unbiased, data-independent acquisition LC-MS/MS. We identified 770 reviewed proteins in the muscle tissue, 296 of which were differentially abundant between the control and injury groups (P ≤ 0.05). Around 50 proteins showed large differences (≥10-fold) or a distinct pattern of abundance after injury. These included proteins that have not been identified previously in injured muscle, such as ferritin light chain 1, fibrinogen γ-chain, fibrinogen β-chain, osteolectin, murinoglobulin-1, T-kininogen 2, calcium-regulated heat-stable protein 1, macrophage-capping protein, retinoid-inducible serine carboxypeptidase, ADP-ribosylation factor 4, Thy-1 membrane glycoprotein, and ADP-ribosylation factor-like protein 1. Some proteins increased between 6 h and 14 days, whereas other proteins increased in a more delayed pattern at 7 days after injury. Bioinformatic analysis revealed that various biological processes, including regulation of blood coagulation, fibrinolysis, regulation of wound healing, tissue regeneration, acute inflammatory response, and negative regulation of the immune effector process, were enriched in injured muscle tissue. This study advances the understanding of early muscle healing after muscle injury and lays a foundation for future mechanistic studies on interventions to treat muscle injury.

Genomics, molecular and evolutionary perspective of NAC transcription factors

NAC (NAM, ATAF1,2, and CUC2) transcription factors are one of the largest transcription factor families found in the plants and are involved in diverse developmental and signalling events. Despite the availability of comprehensive genomic information from diverse plant species, the basic genomic, biochemical, and evolutionary details of NAC TFs have not been established. Therefore, NAC TFs family proteins from 160 plant species were analyzed in the current study. Study revealed, Brassica napus (410) encodes highest number and Klebsormidium flaccidum (3) encodes the lowest number of TFs. The study further revealed the presence of NAC TF in the Charophyte algae K. flaccidum. On average, the monocot plants encode higher number (141.20) of NAC TFs compared to the eudicots (125.04), gymnosperm (75), and bryophytes (22.66). Furthermore, our analysis revealed that several NAC TFs are membrane bound and contain monopartite, bipartite, and multipartite nuclear localization signals. NAC TFs were also found to encode several novel chimeric proteins and regulate a complex interactome network. In addition to the presence of NAC domain, several NAC proteins were found to encode other functional signature motifs as well. Relative expression analysis of NAC TFs in A. thaliana revealed root tissue treated with urea and ammonia showed higher level of expression and leaf tissues treated with urea showed lower level of expression. The synonymous codon usage is absent in the NAC TFs and it appears that they have evolved from orthologous ancestors and undergone vivid duplications to give rise to paralogous NAC TFs. The presence of novel chimeric NAC TFs are of particular interest and the presence of chimeric NAC domain with other functional signature motifs in the NAC TF might encode novel functional properties in the plants.

Key Physicochemical Characteristics Influencing ADME Properties of Therapeutic Proteins

Therapeutic proteins are a rapidly growing class of drugs in clinical settings. The pharmacokinetics (PK) of therapeutic proteins relies on their absorption, distribution, metabolism, and excretion (ADME) properties. Moreover, the ADME properties of therapeutic proteins are impacted by their physicochemical characteristics. Comprehensive evaluation of these characteristics and their impact on ADME properties are critical to successful drug development. This chapter summarizes all relevant physicochemical characteristics and their effect on ADME properties of therapeutic proteins.

Isolation, partial purification, biochemical characterization and detergent compatibility of alkaline protease produced by Bacillus subtilis, Alcaligenes faecalis and Pseudomonas aeruginosa obtained from sea water samples

In the current study, bacteria isolated from sea water samples of Murdeshwar, Karnataka, were screened for the production of alkaline protease by culturing them onto skim milk agar media. Of the isolated bacteria, Bacillus subtilis, Pseudomonas aeruginosa and Alcaligenes faecalis showed distinct zones of hydrolysis due to enzyme production. They were each inoculated into enzyme production media under submerged fermentation conditions at 37 °C for 48 h with a constant agitation of 120 rpm. Partial purification of alkaline protease was carried out by isoelectric precipitation. Enzyme activity was determined under varying conditions of pH, incubation temperature, different substrates, carbon and nitrogen sources and salt concentrations using sigma’s universal protease activity assay. Enzyme immobilization was carried out using 2% Sodium alginate and 0.1 M ice cold CaCl₂ and its activity under varying pH, temperature conditions and detergent compatibility was assayed. Efficacy of enzyme in stain removal was tested and haemolysis was observed within of 60 s which resulted in removal of the stain. Among the three organisms, enzyme from Bacillus subtilis showed highest activity in all cases indicating that it was the most ideal organism for enzyme production.

Recent developments in capillary and microchip electroseparations of peptides (2015-mid 2017)

The review brings a comprehensive overview of recent developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) to analysis, microscale isolation, purification, and physicochemical and biochemical characterization of peptides in the years 2015, 2016, and ca. up to the middle of 2017. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis (sample preseparation, preconcentration and derivatization, adsorption suppression and EOF control, and detection) are described. New developments in particular CE and CEC methods are presented and several types of their applications to peptide analysis are reported: qualitative and quantitative analysis, determination in complex (bio)matrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid, sequence and chiral analysis, and peptide mapping of proteins. Some micropreparative peptide separations are shown and capabilities of CE and CEC methods to provide important physicochemical characteristics of peptides are demonstrated.