A Wireless Multi-Sensor Dielectric Impedance Spectroscopy Platform

Determination of urea, phosphate, and potassium in agricultural runoff waters using electrochemical impedance spectroscopy

Large-scale use of chemical fertilizers has resulted in the contamination of agricultural runoff waters by soil macronutrients NPK, whose detection is of significant interest. This work reports the determination of macronutrients in the form of urea (N), orthophosphate PO43- (P), and potassium K+ (K) in simulated agricultural runoff waters. Their solutions were prepared by extracting water-soluble constituents of soil. This 'base' solution contains high concentrations of various species, including Cl-, SO42-, NO3-, PO43-, Na+, K+, and NH4+ along with natural organic matter. Predetermined amounts of urea (4 to 22.5 ppm), PO43- (7 to 50 ppm), and potassium K+ (25 to 250 ppm) were added to the base simulated runoff water to prepare standard stock solutions. Using stainless steel working and counter electrodes, a small AC perturbation (±10 mV vs. OCP, vs. Ag/AgCl) was applied and the frequency response of the working electrode-solution interface was measured from 1 Hz to 1 MHz. The interface itself was modeled as a suitable equivalent electrical circuit, and the magnitudes of its components were fitted from experimental data using nonlinear regression. It is observed that PO43- concentration is a linear function of charge transfer resistance arising from redox reaction, K+ concentration is a quadratic function of double-layer capacitance arising from its higher mobility, and urea concentration can be correlated as a linear function of constant phase element arising from its polarization in the presence of an applied electric field. The sensor exhibits good sensitivity, repeatability, and excellent performance against interfering species. These preliminary results show significant potential for development of a real-time or on-site sensing device.

The EcoChip: A Wireless Multi-Sensor Platform for Comprehensive Environmental Monitoring

This paper presents the EcoChip, a new system based on the state-of-the-art electro-chemical impedance (EIS) technologies allowing the growth of single strain organisms isolated from northern habitats. This portable system is a complete and autonomous wireless platform designed to monitor and cultivate microorganisms directly sampled from their natural environment, particularly from harsh northern environments. Using 96-well plates, the EcoChip can be used in the field for real-time monitoring of bacterial growth. Manufactured with high-quality electronic components, this new EIS monitoring system is designed to function at a low excitation voltage signal to avoid damaging the cultured cells. The high-precision calibration network leads to high-precision results, even in the most limiting contexts. Luminosity, humidity, and temperature can also be monitored with the addition of appropriate sensors. Access to robust data storage systems and power supplies is an obvious limitation for northern research. That is why the EcoChip is equipped with a flash memory that can store data over long periods of time. To resolve the power issue, a low-power micro-controller and a power management unit control and supply all electronic building blocks. Data stored in the EcoChip's flash memory can be transmitted through a transceiver whenever a receiver is located within the functional transmission range. In this paper, we present the measured performance of the system, along with results from laboratory tests in vitro and from two field tests. The EcoChip has been utilized to collect bio-environemental data in the field from the northern soils and ecosystems of Kuujjuarapik and Puvirnituq, during two expeditions, in 2017 and 2018, respectively. We show that the EcoChip can effectively carry out EIS analyses over an excitation frequency ranging from 750 Hz to 10 kHz with an accuracy of 2.35%. The overall power consumption of the system was 140.4 mW in normal operating mode and 81 μW in sleep mode. The proper development of the isolated bacteria was confirmed through deoxyribonucleic acid sequencing, indicating that bacteria thrive in the EcoChip's culture wells while the growing conditions are successfully gathered and stored.

Detection of contaminants in water supply: A review on state-of-the-art monitoring technologies and their applications

Water monitoring technologies are widely used for contaminants detection in wide variety of water ecology applications such as water treatment plant and water distribution system. A tremendous amount of research has been conducted over the past decades to develop robust and efficient techniques of contaminants detection with minimum operating cost and energy. Recent developments in spectroscopic techniques and biosensor approach have improved the detection sensitivities, quantitatively and qualitatively. The availability of in-situ measurements and multiple detection analyses has expanded the water monitoring applications in various advanced techniques including successful establishment in hand-held sensing devices which improves portability in real-time basis for the detection of contaminant, such as microorganisms, pesticides, heavy metal ions, inorganic and organic components. This paper intends to review the developments in water quality monitoring technologies for the detection of biological and chemical contaminants in accordance with instrumental limitations. Particularly, this review focuses on the most recently developed techniques for water contaminant detection applications. Several recommendations and prospective views on the developments in water quality assessments will also be included.

Practical Application of Electrochemical Nitrate Sensor under Laboratory and Forest Nursery Conditions

The reduction of nitrate leaching to ensure greater protection of groundwater quality has become a global issue. The development of new technologies for more accurate dosing of nitrates helps optimize fertilization programs. This paper presents the practical application of a newly developed electrochemical sensor designed for in situ quantification of nitrate. To our knowledge, this paper is the first to report the use of electrochemical impedance to determine nitrate concentrations in growing media under forest nursery conditions. Using impedance measurements, the sensor has been tested in laboratory and compared to colorimetric measurements of the nitrate. The developed sensor has been used in water-saturated growing medium and showed good correlation to certified methods, even in samples obtained over a multi-ion fertilisation season. A linear and significant relationship was observed between the resistance and the concentration of nitrates (R² = 0.972), for a range of concentrations of nitrates. We also observed stability of the sensor after exposure of one month to the real environmental conditions of the forest nursery.